Related
Can anyone direct me to the I337UCUAMF3 official firmware?
jsull35 said:
Can anyone direct me to the I337UCUAMF3 official firmware?
Click to expand...
Click to collapse
None available, but I suggest you use the search function and do some reading because this has been mentioned dozens of times already. The best you can do at this point is take the phone to a BestBuys with a Sumsung Kiosk and see if they will reflash it. You need to search to find out more information about it.
scott14719 said:
None available, but I suggest you use the search function and do some reading because this has been mentioned dozens of times already. The best you can do at this point is take the phone to a BestBuys with a Sumsung Kiosk and see if they will reflash it. You need to search to find out more information about it.
Click to expand...
Click to collapse
Yea, this is the second time this week my phone has bricked for no reason. At&t warranty center ran the samsung tool on it last time and fixed it.
jsull35 said:
Yea, this is the second time this week my phone has bricked for no reason. At&t warranty center ran the samsung tool on it last time and fixed it.
Click to expand...
Click to collapse
Sounds like it needs to be replaced (warranty or insurance), but I would try for warranty first. If it bricked for no reason at all, I assume you are not rooted and have nothing custom on the phone? Because if you do, it could prevent a warranty claim. Samsung can and will send you a bill if they find anything has been tampered with. Good luck.
You can check here...
Mind you however, that is ONLY for devices running pre-MF3 bootloaders. If you attempt to flash it as a stock recovery on a MF3 device your end up with a brick. If your on MF3 and have a brick currently, there isn't a way to go back outside of sending the phone back to Samsung or going to Best Buy's Samsung Experience Center.
jsull35 said:
Can anyone direct me to the I337UCUAMF3 official firmware?
Click to expand...
Click to collapse
https://mega.co.nz/#!WEEzSA7Z!aB46731_AwM7P83eMdDlmFYd1hUZfFBcQAZjc1X7wAE Here ya go Hope it works. Thx to @Shockndrop for the files.
Get the new EMJ6. Even beta is fine.
BaSingSe said:
Get the new EMJ6. Even beta is fine.
Click to expand...
Click to collapse
Why? You're just locked down that much tighter. No root, no custom roms
jd1639 said:
Why? You're just locked down that much tighter. No root, no custom roms
Click to expand...
Click to collapse
cant you use safestrap for custom roms?
nabears101 said:
cant you use safestrap for custom roms?
Click to expand...
Click to collapse
not on mj6
nabears101 said:
https://mega.co.nz/#!WEEzSA7Z!aB46731_AwM7P83eMdDlmFYd1hUZfFBcQAZjc1X7wAE Here ya go Hope it works. Thx to @Shockndrop for the files.
Click to expand...
Click to collapse
This is by far your best option, use ODIN and flash these files to return to a stock MF3. Updating to anything higher then MF3 is generally ill-advised. At least for the moment...
nabears101 said:
cant you use safestrap for custom roms?
Click to expand...
Click to collapse
Have you tested or seen anyone else report that the current Safestrap works with MJ6 or you can even gain root access with MJ6?
Not being rude, but please don't offer advice if you are unsure of the outcome (this means more than one person has confirmed working or you have tested it yourself). I personally don't think it hurts to make a suggestion but let the person know it hasn't been tested or you are unsure of the outcome.
Had the OP taken your advice before you were corrected, they would have been upgraded to MJ6 with no option for running a custom ROM or getting root access (hopefully this won't be the case for long).
NighthawkXL said:
This is by far your best option, use ODIN and flash these files to return to a stock MF3. Updating to anything higher then MF3 is generally ill-advised. At least for the moment...
Click to expand...
Click to collapse
The rar file in the link above comes with 5 files.
BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5
MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5
PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5
SS_DL.dll
Odin (v3.07) has 4 slots for different files:
Bootloader
PDA
Phone
CSC
My question is which files go in which slot for redownloading mf3 to a soft bricked mf3 s4?
Zeltex said:
My question is which files go in which slot for redownloading mf3 to a soft bricked mf3 s4?
Click to expand...
Click to collapse
Here is a link showing what this person did. Do not use the SS_DL.dll
http://forum.xda-developers.com/showpost.php?p=46943206&postcount=30
~wolverine~ said:
Here is a link showing what this person did. Do not use the SS_DL.dll
http://forum.xda-developers.com/showpost.php?p=46943206&postcount=30
Click to expand...
Click to collapse
The CSC file seems to be giving me problems. I've tried different versions of ODIN (v3.04,3.07,3.09,1.85) and they all have the same problem.
Zeltex said:
The CSC file seems to be giving me problems. I've tried different versions of ODIN (v3.04,3.07,3.09,1.85) and they all have the same problem.
Click to expand...
Click to collapse
I'm on windows 8.1 pro 64bit & used Odin v1.85. worked perfectly.
Zeltex said:
The CSC file seems to be giving me problems. I've tried different versions of ODIN (v3.04,3.07,3.09,1.85) and they all have the same problem.
Click to expand...
Click to collapse
Probably a bad download
jd1639 said:
Probably a bad download
Click to expand...
Click to collapse
I redownloaded the files again and Odin is still crashing whenever I press start.
Zeltex said:
I redownloaded the files again and Odin is still crashing whenever I press start.
Click to expand...
Click to collapse
I saw your other post with the Odin print out. It looks to me like it's still a bad download, the md5 is not checking.
Edit, what are you using to extract the md5 files from the zip? Use 7-zip.
jd1639 said:
I saw your other post with the Odin print out. It looks to me like it's still a bad download, the md5 is not checking.
Edit, what are you using to extract the md5 files from the zip? Use 7-zip.
Click to expand...
Click to collapse
That might be the case I've been using winrar to extract the files. Not sure if it should make a difference but will try
I was trying to root my new Galaxy Note 3 LTE and Odin said Pass
after restarting my phone I found my Self Stuck in Samsung logo like photo
I still can get into Odin mode but I can't get into Recovery Mode.
Please Help me !
Ahmed.Soubih said:
I was trying to root my new Galaxy Note 3 LTE and Odin said Pass
after restarting my phone I found my Self Stuck in Samsung logo like photo
I still can get into Odin mode but I can't get into Recovery Mode.
Please Help me !
Click to expand...
Click to collapse
you can always just flash the stock rom again with odin as long as you can get into download mode but you loose your data.
are you on 4.4.2 kitkat ? because if so, you need a new version of twrp (or use cwm). there is an unoffical version that supports kk and also the original twrp will get an update soon. theres currently a test build, look at the official thread.
dont use it if you are still on 4.3 !
I really really wish people would search and read before messing with their devices... this is the 800th thread on this again.
Take your battery out, and wait for 60seconds, put back in and try to boot into recovery mode, wipe cache and boot up - OR reflash Stock again.
PS: If you have a Hong Kong Note, you need to go off and read... cause you've made a massive mistake playing.
A.N.Droid said:
you can always just flash the stock rom again with odin as long as you can get into download mode but you loose your data.
are you on 4.4.2 kitkat ? because if so, you need a new version of twrp (or use cwm). there is an unoffical version that supports kk and also the original twrp will get an update soon. theres currently a test build, look at the official thread.
dont use it if you are still on 4.3 !
Click to expand...
Click to collapse
Iam on 4.3 Jelly Bean
Ahmed.Soubih said:
Iam on 4.3 Jelly Bean
Click to expand...
Click to collapse
pull the battery, like radicalisto told you ! forgot about that...
give him a thanks if it worked !
Check you have the right CF-Autoroot, if you got the latest one it won't work as it's for KK only try This One - In future please read more.
A.N.Droid said:
pull the battery, like radicalisto told you ! forgot about that...
give him a thanks if it worked !
Click to expand...
Click to collapse
I pulled the battery and try to get into Recovery mode but I couldn't , I am trying to flash Stock firmware now .
Thank you
Ahmed.Soubih said:
I pulled the battery and try to get into Recovery mode but I couldn't , I am trying to flash Stock firmware now .
Thank you
Click to expand...
Click to collapse
Use the link I posted before you flash stock again, boot into download mode and flash via Odin PDA and it should be fine
radicalisto said:
Use the link I posted before you flash stock again, boot into download mode and flash via Odin PDA and it should be fine
Click to expand...
Click to collapse
I am on Android 4.3 I didn't upgrade to 4.4 . I just tried to root it. I am not using HongKong Version.
What Should I do Before Re-flashing Stock Firmware ?
Thank you
Ahmed.Soubih said:
What Should I do Before Re-flashing Stock Firmware ?
Thank you
Click to expand...
Click to collapse
Nothing. Boot into download mode, and flash it via Odin. Job done. - Am I to assume that the CF autoroot I gave you didn't work?
radicalisto said:
Nothing. Boot into download mode, and flash it via Odin. Job done. - Am I to assume that the CF autoroot I gave you didn't work?
Click to expand...
Click to collapse
No, I haven't tried it yet , will it work on Android 4.3 ?
Ahmed.Soubih said:
No, I haven't tried it yet , will it work on Android 4.3 ?
Click to expand...
Click to collapse
You NEED to read. If you don't read you WILL end up with a bricked device. -- I posted the correct link for you to try, I wouldn't have posted it if it did not work.
radicalisto said:
You NEED to read. If you don't read you WILL end up with a bricked device. -- I posted the correct link for you to try, I wouldn't have posted it if it did not work.
Click to expand...
Click to collapse
Ok I'll Flash the Auto root file you gave to me before . stock firmware
Thank you
Ahmed.Soubih said:
No, I haven't tried it yet , will it work on Android 4.3 ?
Click to expand...
Click to collapse
Before going to the trouble of flashing the stock rom and try rooting again, why not flash the cf-autoroot radicalisto linked you to? It'll only take a minute to do it.
hey_joe said:
Before going to the trouble of flashing the stock rom and try rooting again, why not flash the cf-autoroot radicalisto linked you to? It'll only take a minute to do it.
Click to expand...
Click to collapse
I will Flash it .
Thank you
radicalisto said:
You NEED to read. If you don't read you WILL end up with a bricked device. -- I posted the correct link for you to try, I wouldn't have posted it if it did not work.
Click to expand...
Click to collapse
Thank you. I Used CF Root you gave to me and got My phone Back .
I donot know what to say , Thank you very much
Ahmed.Soubih said:
Thank you. I Used CF Root you gave to me and got My phone Back .
I do know what to say , Thank you very much
Click to expand...
Click to collapse
Glad you got sorted. In future, before you make any changes to your very expensive device, make sure you read and know exactly what files you have and what you are doing :good:
THIS GUIDE IS OVER 6 YEARS OLD AND HAS BEEN REMOVED TO PREVENT UNINTENTIONAL HARM
Reserved
Reserved
you guys know anywhere to download the latest sm-t320 firmware pre-rooted?
syde1020 said:
you guys know anywhere to download the latest sm-t320 firmware pre-rooted?
Click to expand...
Click to collapse
No, sorry but why dont you go ahead and flash back to stock and then follow my guide on how to root HERE
I am looking for the stock firmware for the sm T320 usa but I cant find it on the sammobile site. Any help will be very appreciated.
Thanks.
furialfil said:
I am looking for the stock firmware for the sm T320 usa but I cant find it on the sammobile site. Any help will be very appreciated.
Thanks.
Click to expand...
Click to collapse
The TM-320s are at the following. You need to filter by country. The standard U.S. firmware is under "Cellular South (XAR)":
http://www.sammobile.com/firmwares/database/SM-T320/
Do note that Lollipop just started rolling out to the Tab S series. Hopefully that's a sign that the Tab Pro Lollipop isn't much farther off.
I'm not able to download any firmware from the SamMobile site. Can anyone provide me with a firmware? I don't care about the region or anything since I'll be flashing CM right after that (my device is soft-bricked, and I need to flash stock firmware with Odin). If someone can either mirror a firmware or share it with me, I'd greatly appreciate it
Would flashing this firmware remove the KNOX triggered flag.
I.e. if I flash it, can I return it to the shop and Samsung for repair?
EDIT: Yes, it removes KNOX
I have problems during the boot of the tablet
I've followed all the steps but when i've finally used odin, my tablet doesn't power on, it stays at samsung, st 320 or something like that and I can't go further. Also it only shows all that stuff when it is pluged in the pc.
I really don't know what to do, so could anybody help me please???
remb said:
Would flashing this firmware remove the KNOX triggered flag.
I.e. if I flash it, can I return it to the shop and Samsung for repair?
EDIT: Yes, it removes KNOX
Click to expand...
Click to collapse
Can u explain pls. Did it go from knox=1 to knox=0 ? Everyone says that this is impossible, tho?
Ot u kept knox =0 thru reflashing stock firmware? Which one?
TIA!
J.Tichi said:
Can u explain pls. Did it go from knox=1 to knox=0 ? Everyone says that this is impossible, tho?
Ot u kept knox =0 thru reflashing stock firmware? Which one?
TIA!
Click to expand...
Click to collapse
Knox flag will still be 1 once it's triggered it's forever...........don't let anyone tell you diffrent......some people say after they sent it in for service and a Samsung service center Knox was back to 0 but don't know if that was ever verified....
I would like to flash back to stock with newest firmware but keep custom recovery. Also what about using newest version of odin?
How would I use that?
cloud71 said:
I would like to flash back to stock with newest firmware but keep custom recovery. Also what about using newest version of odin?
How would I use that?
Click to expand...
Click to collapse
I don't think that's possible unless you have a pre-rooted or custom rom that you are flashing thru Odin. If you flash the newest firmware it will wipe out your root and custom recovery and you start all over.
Did any one know which download is the stock firmware for US? Tab pro 12.2? Thanks
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
uplift777 said:
Did any one know which download is the stock firmware for US? Tab pro 12.2? Thanks
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
Click to expand...
Click to collapse
Cellular South.
Sent from my Samsung Galaxy S5 using XDA Premium HD app
link please??
I cant download from sammobile, im stuck in a soft brick and cant find the stock firmware anywhere, can someone help please?
//bump
Xar-t520ueuank1_t520xarank1
Greek81 said:
I cant download from sammobile, im stuck in a soft brick and cant find the stock firmware anywhere, can someone help please?
Click to expand...
Click to collapse
I have the firmware, where can I upload it, I have copy in my dropbox
ccanetem said:
I've followed all the steps but when i've finally used odin, my tablet doesn't power on, it stays at samsung, st 320 or something like that and I can't go further. Also it only shows all that stuff when it is pluged in the pc.
I really don't know what to do, so could anybody help me please???
Click to expand...
Click to collapse
This happened to me. Does anyone have a solution?
detroitguy1 said:
This happened to me. Does anyone have a solution?
Click to expand...
Click to collapse
Factory reset
Sent from my SPH-L720 using Tapatalk
hello raga I hope you will answer me. I have a note 3 n9005 no brand with firmware 5.0 lollipop and I wanted to put a rom of notes 5 and then modified. turning on the internet I saw the fact of the bootloader and wanted to know if it is blocked and what to do. thanks a lot
luigi97777 said:
hello raga I hope you will answer me. I have a note 3 n9005 no brand with firmware 5.0 lollipop and I wanted to put a rom of notes 5 and then modified. turning on the internet I saw the fact of the bootloader and wanted to know if it is blocked and what to do. thanks a lot
Click to expand...
Click to collapse
The international version comes with Bootloader unlocked so your bootloader is fine.
so I can safely install any rom?
luigi97777 said:
so I can safely install any rom?
Click to expand...
Click to collapse
Yep, but always follow the developer steps for install it.
Joku1981 said:
Yep, but always follow the developer steps for install it.
Click to expand...
Click to collapse
one last thing. I can install the recovery via Odin and after making the root with Update Supersu?
Or use the program self-cf-root always odin flesh and flesh the recovery?
anyone can help me with my galaxy note 4 at&t version (sm-n910a). updated to 6.0.1 marshmallow. build number N910AUCS2EPH7.
My note 4 booted into safe mode one day. and now i can't get out of SAFE MODE.
I already tried everything.
-did the button combination.
-did the battery removing trick.
-disabled safe mode in the settings.
-wipe data/cache settings in recovery mode.
-already did factory reset.
Please. if there is something i missed out, please do tell me
I would really appreciate it if there is anyone out there who can help me get out safe mode with my note 4? Really need help.
ron280289 said:
anyone can help me with my galaxy note 4 at&t version (sm-n910a). updated to 6.0.1 marshmallow. build number N910AUCS2EPH7.
My note 4 booted into safe mode one day. and now i can't get out of SAFE MODE.
I already tried everything.
-did the button combination.
-did the battery removing trick.
-disabled safe mode in the settings.
-wipe data/cache settings in recovery mode.
-already did factory reset.
Please. if there is something i missed out, please do tell me
I would really appreciate it if there is anyone out there who can help me get out safe mode with my note 4? Really need help.
Click to expand...
Click to collapse
Flash stock firmware... it will deffinately come out of safe mode. However you will lose your data
There is a tool by dr.ketan that will bring out of safe mode:
https://play.google.com/store/apps/details?id=com.ketan.powermenupro
callumbr1 said:
Flash stock firmware... it will deffinately come out of safe mode. However you will lose your data
Click to expand...
Click to collapse
will try this option bro.. however doesn't flashing stock firmware requires root? afaik there is no root for my version of note 4
lover said:
There is a tool by dr.ketan that will bring out of safe mode:
https://play.google.com/store/apps/details?id=com.ketan.powermenupro
Click to expand...
Click to collapse
will try this app sir.... before i try reflashing stock firmware. thanks for this. did not even know this kind of app exist. cheers :victory:
but sir this app requires root access. afaik there is note root for my version of note 4.
some members here on xda has also been looking into rooting our version of note 4 (SM-N910A) but to no avail we still cannot find one.
ron280289 said:
will try this option bro.. however doesn't flashing stock firmware requires root? afaik there is no root for my version of note 4
Click to expand...
Click to collapse
I seen your post that your gonna try that app, which is fine.
But to answer your question, No, you do not need root to flash a stock firmware. You use a program Odin.
Now this all depends on if the 910A model has odin tar files available. I'm unsure of this.
If that app don't work and you need help with this, just let me know.
ron280289 said:
will try this option bro.. however doesn't flashing stock firmware requires root? afaik there is no root for my version of note 4
Click to expand...
Click to collapse
You flaah stock firmware through odin. Root not needed. Which model Do you have?
aaron74 said:
I seen your post that your gonna try that app, which is fine.
But to answer your question, No, you do not need root to flash a stock firmware. You use a program Odin.
Now this all depends on if the 910A model has odin tar files available. I'm unsure of this.
If that app don't work and you need help with this, just let me know.
Click to expand...
Click to collapse
OK so I've looked into my options. And I guess I wanted to do the Odin way. The problem is the volume down button on my note 4 is not working properly. It does not want to engage. As I've looked into the Odin tutorials here on xda, it seems it is needed after flashing. Coz it is needed to wipe data cache once it goes stuck in bootloop.
Now for the stock firmware. Seems like I'm out of luck coz there is no available stock firmware on Samsung update and sammobile for my sm-n910a. Gosh don't know what to do now. I'm lost. I appreciate your help and advice. If you have any other ideas. Please do tell me.
callumbr1 said:
You flaah stock firmware through odin. Root not needed. Which model Do you have?
Click to expand...
Click to collapse
I have the sm-n910a. It seems I can't find stock firmware for this. I've seen some posting on other sites aside from Samsung updates and sammobile, though I'm too scared to try them.
ron280289 said:
I have the sm-n910a. It seems I can't find stock firmware for this. I've seen some posting on other sites aside from Samsung updates and sammobile, though I'm too scared to try them.
Click to expand...
Click to collapse
Will Samsung kies work or smart switch or whatever that new program is they have?
ron280289 said:
I have the sm-n910a. It seems I can't find stock firmware for this. I've seen some posting on other sites aside from Samsung updates and sammobile, though I'm too scared to try them.
Click to expand...
Click to collapse
I will find you thr firmware i posted it here on xda not so long ago. And you really need the vol down button to gwt into download mode in order to flash the firmware
aaron74 said:
Will Samsung kies work or smart switch or whatever that new program is they have?
Click to expand...
Click to collapse
i haven't tried samsung kies. but i've tried the older version of kies way before android was still new on older samsung phones. and dang it is slow as hell for a software but that was just based on my experience.
callumbr1 said:
I will find you thr firmware i posted it here on xda not so long ago. And you really need the vol down button to gwt into download mode in order to flash the firmware
Click to expand...
Click to collapse
well i really appreciate it if ever you can find it. :highfive:
it seems i need to get that volume down get repaired first. maybe it is a dodgy microswitch or something.
ron280289 said:
well i really appreciate it if ever you can find it. :highfive:
it seems i need to get that volume down get repaired first. maybe it is a dodgy microswitch or something.
Click to expand...
Click to collapse
Have you checked over at the AT&T thread