Related
Is there anyway to enable app2sd in our stock ROM?? on JP6.
satyamsit said:
Is there anyway to enable app2sd in our stock ROM?? on JP6.
Click to expand...
Click to collapse
No, because the stock kernels don't support init.d scripts. Flash a custom kernel (I recommend G3Mod).
debaj said:
No, because the stock kernels don't support init.d scripts. Flash a custom kernel (I recommend G3Mod).
Click to expand...
Click to collapse
hv been using g3mod .. but 1.9 have some strange way to notifuy abt battery ...
If i flash Ext4 formater i got bootloop
error in mount
PLZ help
jencent said:
If i flash Ext4 formater i got bootloop
error in mount
PLZ help
Click to expand...
Click to collapse
1st flash ext4 formatter then reboot recovery. flash bieltv.3 s kernel from development thread (no need to mount system).Then again reboot recovery mount all and flash your desired cm rom
can i flash other rom like hyperion and use other custom rom???
jencent said:
can i flash other rom like hyperion and use other custom rom???
Click to expand...
Click to collapse
only if the kernel supports ext
else flash stock rom via odin to convert back to rfs
marcussmith2626 said:
only if the kernel supports ext
else flash stock rom via odin to convert back to rfs
Click to expand...
Click to collapse
what kernel supports ext??
jencent said:
what kernel supports ext??
Click to expand...
Click to collapse
all kernels for cm
hells fusion #50 for stock based
maybe others but cant remember - will say on kernel op (note ext system support is different from ext sd card support)
marcussmith2626 said:
all kernels for cm
hells fusion #50 for stock based
maybe others but cant remember - will say on kernel op (note ext system support is different from ext sd card support)
Click to expand...
Click to collapse
how about white kernel sir??
jencent said:
how about white kernel sir??
Click to expand...
Click to collapse
probably - like I said cant remember everything - it will say on thread op of kernel
marcussmith2626 said:
probably - like I said cant remember everything - it will say on thread op of kernel
Click to expand...
Click to collapse
haha. ok sir
i have a problem. bug or something
off line charging
kernel GNU#10
jencent said:
i have a problem. bug or something
off line charging
kernel GNU#10
Click to expand...
Click to collapse
offline charging wont work if you are on ext due to mount points in the kernel
the only kernel that works on ext with online charging is bieltv.3 kernel for use on cm7/9
note your phone will still charge just not show the animation
Hi did you try the Multi formatter of sir Rio?? its the one that really works on me..
falsesmindalone said:
Hi did you try the Multi formatter of sir Rio?? its the one that really works on me..
Click to expand...
Click to collapse
Hindi pa idol>>> kasi ang alam ko eh pareparehas lahat ng formatter>>>>
jencent said:
Hindi pa idol>>> kasi ang alam ko eh pareparehas lahat ng formatter>>>>
Click to expand...
Click to collapse
as per xda rules
ALL posts should be in english or also contain an english translation
marcussmith2626 said:
as per xda rules
ALL posts should be in english or also contain an english translation
Click to expand...
Click to collapse
sorry sir
but what is the best/easiest sir? multi formatter or ext4 formatter
jencent said:
sorry sir
but what is the best/easiest sir? multi formatter or ext4 formatter
Click to expand...
Click to collapse
neither - its personal preference of what you prefer to use and what works best for you
marcussmith2626 said:
neither - its personal preference of what you prefer to use and what works best for you
Click to expand...
Click to collapse
i will try this two formatter later
sir can you explain me how to make stock kernel has a swap support ?thanks
why don't only use a custom kernel ? Beside support swap and amarullz , it has a lot of governor too
GalKill said:
why don't only use a custom kernel ? Beside support swap and amarullz , it has a lot of governor too
Click to expand...
Click to collapse
for now i used savie kernel rev73 but it make my device take long boot time
Try hells kernel #50. Its very smooth on my hyperion 9 and never lag
GalKill said:
Try hells kernel #50. Its very smooth on my hyperion 9 and never lag
Click to expand...
Click to collapse
Thanks ive try it its smooth
Kevin Vengeance said:
Thanks ive try it its smooth
Click to expand...
Click to collapse
Just press it (thanks button)
Please use this thread for your questions answers and support
KERNEL THREAD HERE
dorimanx LP Kernels storage here
Does it work on 5.1 or 5.1.1 ROMs?
gamerZ1 said:
Does it work on 5.1 or 5.1.1 ROMs?
Click to expand...
Click to collapse
NO, LG Stock ROM is based on 5.0.2 and this kernel works only on this base.
SREEPRAJAY said:
Please use this thread for your questions answers and support
Click to expand...
Click to collapse
Dorimanx is only for stock
4Freedom said:
Dorimanx is only for stock
Click to expand...
Click to collapse
Is there any difference of opinion or accepting?
The THREAD TITLE says so too.
I think you also need to take care of your signature (image) size my friend
gamerZ1 said:
Does it work on 5.1 or 5.1.1 ROMs?
Click to expand...
Click to collapse
You don't even read one post above yours...
gamerZ1 said:
Does it work on 5.1 or 5.1.1 ROMs?
Click to expand...
Click to collapse
Read man!
Sent from my LG-D802
Can I flash this while using jb bootloader?
defynoob said:
Can I flash this while using jb bootloader?
Click to expand...
Click to collapse
no. will not boot.
what is the best config for best battery
,
seeker07 said:
what is the best config for best battery
,
Click to expand...
Click to collapse
Hi,
Dorimanx has defined profiles for different usage. I would guess that extreme battery profile is the one you are looking for. ( is to be set in the profile tab in stweaks app)
@dorimanx , sorry for ask this, but, wich stock rom did you flash? D? Or B? I can't remember
30B he did..
me too
Kernel compile
Hi,
As I'm curious, I'm trying to compile dorimanx kernel jus to see how all this is working.
So I've pulled three repo (crosstool-ng-by-dorimanx, DORIMANX_LG_STOCK_LP_KERNEL, lp_ramdisk_dorimanx )
when I run ./default_build.sh I have this error:
android-toolchain/bin/arm-eabi-ar: error while loading shared libraries: libfl.so.2: cannot open shared object file: No such file or directory
both libfl-dev i386 and x86_64 are installed on my 14.04 Ubuntu system.
If any of you know what is the problem, please let me know ?
Flashed dori1.2 on 30b Somboons Rom. Dorimanx states "sorry, no kernel support".
Already rebooted, reset to defaults,...
Wimmme said:
Flashed dori1.2 on 30b Somboons Rom. Dorimanx states "sorry, no kernel support".
Already rebooted, reset to defaults,...
Click to expand...
Click to collapse
Had the Same issue, Check if stweaks Has root acess
Spoiler
LG G2 D802
Dorimanx LP Kernel
Stock LP
ViPER4AndroidFX+Poweramp
? ATH-M50x ?
Thank you for excellent kernel. I was so angry because of stock.
What exactly is 'UltraSound high performance audio hardware'? Another tweaks to audio drivers? I must say that sound quality on kitkat dorimanx seems to be better than other kernels.
Lycidias said:
Had the Same issue, Check if stweaks Has root acess
Spoiler
LG G2 D802
Dorimanx LP Kernel
Stock LP
ViPER4AndroidFX+Poweramp
? ATH-M50x ?
Click to expand...
Click to collapse
I don't even have stweaks. Just reflashed 1.2 but still no stweaks. I see synapse is installed. I'll try to remove synapse and reflash
Update: dorimanx app == stweaks.
I am already that long on Aosp i didn't even knew.
It has root access, still no go
maybe delete /data/.dori Folder and reflash kernel..
BaschtlWaschtl said:
maybe delete /data/.dori Folder and reflash kernel..
Click to expand...
Click to collapse
It's working now, tnx
hello guys ,
im searching for lg e610 kernel with init.d support.
where i can find one ?
thanks.
ismainau said:
hello guys ,
im searching for lg e610 kernel with init.d support.
where i can find one ?
thanks.
Click to expand...
Click to collapse
you can enable init.d by this way
http://forum.xda-developers.com/showthread.php?t=1710980
it doesn't work
it doesn't work , i've found the file on another site because the link is dead . after i flashed it with clockwordmod it didn't work.
please help
for information i have a custom rom : i have cyanogenmod 11-2014013-UNOFFICIAL-e610
--- 3.4.0-CM
ismainau said:
it doesn't work , i've found the file on another site because the link is dead . after i flashed it with clockwordmod it didn't work.
please help
for information i have a custom rom : i have cyanogenmod 11-2014013-UNOFFICIAL-e610
--- 3.4.0-CM
Click to expand...
Click to collapse
you enable inti.d by type a code in post-boot.sh file on the link above
and you can try flash Skernel or monster kernel
didn't work
i edited the post_boot and it didn't work .
do you think thoses custom kernels would work with my custom rom ?
that's the link of my custom rom : http://forum.xda-developers.com/showthread.php?t=2519448
i need a good custom kernel compatible with my rom that has init.d support.
thanks in advance.
use the kernel that OP give in thread of the rom or use Skernel or monster kernel, and i think all version from beta 9 or above is support init.d
SMILEVN said:
use the kernel that OP give in thread of the rom or use Skernel or monster kernel, and i think all version from beta 9 or above is support init.d
Click to expand...
Click to collapse
tried all of your sollutions , none of them works
hmm
i don't have any init.d problem in beta 11, just flash rom and gapps, then flash mod and tweak i want
How do you test init.d work???
SMILEVN said:
hmm
i don't have any init.d problem in beta 11, just flash rom and gapps, then flash mod and tweak i want
How do you test init.d work???
Click to expand...
Click to collapse
with universal init.d