[Q] Flash counter - Galaxy S 4 Q&A, Help & Troubleshooting

Can I check flash counter without rooting? I had a root once, then unrooted and used triangle away, but had superSU that was unable to uninstall, so I flashed official rom from my carrier with Odin and SuperSU disappeared. Now I wonder if flash counter is still at 0, cause I'm forced to use my warranty due to bulky battery.

Pfemciek said:
Can I check flash counter without rooting? I had a root once, then unrooted and used triangle away, but had superSU that was unable to uninstall, so I flashed official rom from my carrier with Odin and SuperSU disappeared. Now I wonder if flash counter is still at 0, cause I'm forced to use my warranty due to bulky battery.
Click to expand...
Click to collapse
No you can't, not without rooting again. If you re-set the counter prior to flashing the Stock Rom then you should be OK. Put your phone in download mode and just make sure everything still say's 'Official'........I'd be surpised if they checked this anyway if its for a dodgy battery!

Related

MK2 & Custom on Boot

The problem is the phone is showing Custom when the phone is turned on. I was on MF3, had rooted via the SD card method. The custom appeared at that point. I did a factory reset and the custom went away and lost root but the superuser app was still showing in the app draw (factory reset did not delete this). I was planning on reloading the MF3 firmware via odin but lent the phone to my daughter while I replaced the screen in her note2. Well of course she got the upgrade message to 4.3 from AT&T, did it and now the unlocked custom is back. Not sure why as it was showing as official, the trip counter was still 0 (never installed a ROM on it) BUT the superuser app was there.
Now on 4.3 I've rooted/unrooted via Kingo, during the unroot it removes superuser but the custom won't go away. I installed Triangle Away while rooted and it still shows 0 on the flash counter. Is there something in this Knox security (not sure how to check this) causing the custom?
Just want to get it back to any stock AT&T firmware so I can sell it. TIA for any help
there are only certain roms you can flash while being on mf3. If you did the mk2 update there is no recovery out yet. Using vroot and kingo are unsafe methods of rooting so puts your device at risk.
rzracer2 said:
The problem is the phone is showing Custom when the phone is turned on. I was on MF3, had rooted via the SD card method. The custom appeared at that point. I did a factory reset and the custom went away and lost root but the superuser app was still showing in the app draw (factory reset did not delete this). I was planning on reloading the MF3 firmware via odin but lent the phone to my daughter while I replaced the screen in her note2. Well of course she got the upgrade message to 4.3 from AT&T, did it and now the unlocked custom is back. Not sure why as it was showing as official, the trip counter was still 0 (never installed a ROM on it) BUT the superuser app was there.
Now on 4.3 I've rooted/unrooted via Kingo, during the unroot it removes superuser but the custom won't go away. I installed Triangle Away while rooted and it still shows 0 on the flash counter. Is there something in this Knox security (not sure how to check this) causing the custom?
Just want to get it back to any stock AT&T firmware so I can sell it. TIA for any help
Click to expand...
Click to collapse
Install the Xposed framework from xda. Then, install the Wanam module and look for the Setting under "Security Hacks" that reads "Fake system status" and check the box and reboot.
The issue won't truly be resolved until you flash an official ROM, but the Custom screen will be gone at boot.
rzracer2 said:
The problem is the phone is showing Custom when the phone is turned on. I was on MF3, had rooted via the SD card method. The custom appeared at that point. I did a factory reset and the custom went away and lost root but the superuser app was still showing in the app draw (factory reset did not delete this). I was planning on reloading the MF3 firmware via odin but lent the phone to my daughter while I replaced the screen in her note2. Well of course she got the upgrade message to 4.3 from AT&T, did it and now the unlocked custom is back. Not sure why as it was showing as official, the trip counter was still 0 (never installed a ROM on it) BUT the superuser app was there.
Now on 4.3 I've rooted/unrooted via Kingo, during the unroot it removes superuser but the custom won't go away. I installed Triangle Away while rooted and it still shows 0 on the flash counter. Is there something in this Knox security (not sure how to check this) causing the custom?
Just want to get it back to any stock AT&T firmware so I can sell it. TIA for any help
Click to expand...
Click to collapse
unroot via kingo, then factory rest...worked for me on 4.3
Do you plan on a warranty exchange?
I love seeing the custom on boot, it lets me know and other everyday normal people know my phone is slightly modified.
ROOTED ATT MK2 using Tapatalk
Not sure what I'm going to do with the phone yet, probably sell it but not totally sure. Wondering with it now showing Custom on the boot screen and in the OS will it still receive OTA updates? Hoping the AT&T 4.3 or 4.4 image will be available in the future and that might help.
rzracer2 said:
Not sure what I'm going to do with the phone yet, probably sell it but not totally sure. Wondering with it now showing Custom on the boot screen and in the OS will it still receive OTA updates? Hoping the AT&T 4.3 or 4.4 image will be available in the future and that might help.
Click to expand...
Click to collapse
I was rooted custom and received my OTA no problem. Yes
ROOTED ATT MK2 using Tapatalk

Screen not working - Unroot for warranty

My Galaxy S4 just decided to show wavy lines on the screen instead of turning on - as far as I can tell the screen and digitiser are no longer working.
**I CANNOT SEE OR DO ANYTHING ON THE SCREEN**
I have a 4.2.2 i9505 UAMDE -Stock Rom- that is rooted.
I have never flashed any other firmware to it - just rooted it.
I have Kies access and backed up my phone. Kies prompted for a firmware upgrade when I plugged in the phone.
I want to return it to stock/unroot etc so Samsung will warranty the phone without fuss (it was not dropped, just stopped working).
Some questions:
Most important:
1. Is it possible to get the phone to a state that will be warranty-ready without having a screen?
2. Do I need to Triangle away if all I have done is rooted? If so, can I do this without a working screen?
3. What is the best way to return to stock? ODIN or should I just let Kies update to latest firmware? (If either will it be enough to satisfy the first question)
4. If Kies does the update will I need access to the screen to complete it?
Thanks in advance!
1. You can flash same firmware with ODin. It will delete root access, but app will stay, so you have to uninstall it through https://play.google.com/store
2. You don't need to, unless you've made a root through Oding flash?
3. Odin
4. No, but it will udpate it to 4.3 with KNOX?
mar10o said:
1. You can flash same firmware with ODin. It will delete root access, but app will stay, so you have to uninstall it through https://play.google.com/store
2. You don't need to, unless you've made a root through Oding flash?
3. Odin
4. No, but it will udpate it to 4.3 with KNOX?
Click to expand...
Click to collapse
Thanks for the quick reply.
1. not sure which 'app will stay' you mean?
2. Actually I cannot remember how I rooted - I will have to look this up again. Something tells me cf-autoroot and maybe ODIN... All I can remember it that I still have stock ROM just with root.
4. Agree that this might not be the best idea as I am trying to stay away from KNOX but I wonder if Samsung will automatically update to the latest ROM as part of the fix?
Kies is currently sitting on backing up "preparing" for ages and ages... hope it works in the end.
Looking back I suspect I used CF-autoroot which probably mean my counter has gone up.
Any way of resetting this without a screen?
I've managed to get some screen control using adb, screencast and teamviewer.
Triangle away says:
Counter: 0
Binary: Official
System: Official
I suspect the Official comes from the fact I was running Wanam Xposed and spoofing official.
One last question -
Given all that information I should just be able to flash
4.2.2 UAMDE Stock rom from sammobile with odin
and everything will be warranty-ready?
(will this wipe all my data and programs as well? - something I WANT to happen)
It will not wipe it. On the older devices like S3, there was a special ROM for cleaning purposes with PIT file, that was repartitioning your memory. Maybe there is something like that for S4?

[Q] S4 I9500 BN2 root without trip knox.

I tried to root with towelroot=not support?:crying:
I tryied vroot and it support,no dare to click, will it trip knox?
Others like geniusroot,kingo root support n trip knox?
Any chances to root without trip knox?
Thank you.
Hello.
I had rooted my Galaxy S4 (i9505), 4.4.2, without triggering the Knox Flag, using CF-Auto-Root, via Odin. The Flash Counter is now 1, due to flashing something, but Knox is 0x0. Flash counter can be reseted by using Triangle Away,
Hope this helps.
http://forum.xda-developers.com/showthread.php?t=2292615
Proof:
https://www.dropbox.com/s/mkjnmpwcq6pz2se/DSC_3831.JPG?dl=0
(no 0x1 flag)
https://www.dropbox.com/s/gctx9ejiin47rrp/Screenshot 2014-10-04 17.08.39.png?dl=0
(device supported by Kies)
https://www.dropbox.com/s/v8hpbmo815ltn1w/2014-10-04 14.09.39.png?dl=0
(SuperUser working)
Mind that you have to install BusyBox from Google Play, cause it does not come with it.
Have fun
costin96 said:
Hello.
I had rooted my Galaxy S4 (i9505), 4.4.2, without triggering the Knox Flag, using CF-Auto-Root, via Odin. The Flash Counter is now 1, due to flashing something, but Knox is 0x0. Flash counter can be reseted by using Triangle Away,
Hope this helps.
http://forum.xda-developers.com/showthread.php?t=2292615
Proof:
https://www.dropbox.com/s/mkjnmpwcq6pz2se/DSC_3831.JPG?dl=0
(no 0x1 flag)
https://www.dropbox.com/s/gctx9ejiin47rrp/Screenshot 2014-10-04 17.08.39.png?dl=0
(device supported by Kies)
https://www.dropbox.com/s/v8hpbmo815ltn1w/2014-10-04 14.09.39.png?dl=0
(SuperUser working)
Mind that you have to install BusyBox from Google Play, cause it does not come with it.
Have fun
Click to expand...
Click to collapse
Thanks to you.Still can not root at the moment fir I9500
Not included - Triangle Away - ! NOT OPERATIONAL ON THE GT-I9500 !
Triangle Away can be used to reset the flash counter after installing CF-Root. The flash counter keeps track of how many custom firmwares you have flashed, as this voids warranty. (No idea what this about ? Read up on it, you will want to use this !)
ttkyy said:
Thanks to you
Click to expand...
Click to collapse
Bear in mind, that I am not 100% sure that it will work on ALL Galaxy S4 devices (I mean not trigger it).
Also bear in mind that OTA (Over the air update) will NOT work, it will return the message "Phone was been personalized."
Although, Kies sees it. Also make sure you don't have Knox mode activated or installed.
LATER EDIT:
I see that Triangle Away is only for the Qualcomm Galaxy S4 (9505). That means that you can't, at this moment, reset the flash counter. There are basically two things to worry about:
- Knox Flag -> as which seems so, I avoided it by installing that CF-Auto-Root on my 9505. I am not sure about avoiding it on 9500, but it should work.
- Flash Counter -> it raises everything you flash something via download mode. If it's 0, in Settings > About Phone > Status >Phone Status, it will return "Original" or something. If it's anything else than 0 (like 1, which I currently have cause I re-flashed root due to some tiny problem), it will return "personalized" or something like it. That will still void warranty IF the phone is sent to warranty like that, but will NOT trigger Knox. Also that will stop OTA Updates from working, but Kies updates will work (for some reason, samsung bug, use it ).
I have no idea how to help you regarding that Flash Counter on the 9500.
costin96 said:
Bear in mind, that I am not 100% sure that it will work on ALL Galaxy S4 devices (I mean not trigger it).
Also bear in mind that OTA (Over the air update) will NOT work, it will return the message "Phone was been personalized."
Although, Kies sees it. Also make sure you don't have Knox mode activated or installed.
LATER EDIT:
I see that Triangle Away is only for the Qualcomm Galaxy S4 (9505). That means that you can't, at this moment, reset the flash counter. There are basically two things to worry about:
- Knox Flag -> as which seems so, I avoided it by installing that CF-Auto-Root on my 9505. I am not sure about avoiding it on 9500, but it should work.
- Flash Counter -> it raises everything you flash something via download mode. If it's 0, in Settings > About Phone > Status >Phone Status, it will return "Original" or something. If it's anything else than 0 (like 1, which I currently have cause I re-flashed root due to some tiny problem), it will return "personalized" or something like it. That will still void warranty IF the phone is sent to warranty like that, but will NOT trigger Knox. Also that will stop OTA Updates from working, but Kies updates will work (for some reason, samsung bug, use it ).
I have no idea how to help you regarding that Flash Counter on the 9500.
Click to expand...
Click to collapse
Thanks again.
I just hav to avoid to take the risk and prevent warranty void,the answer is not to root at the moment.
Thanks gain:good:

[GT-I9506] Need help resetting my device software status

So, a few months ago I decided to root my phone with towelroot to give a try on a few root applications, as i was curious, but after that, I decided to remove through supersu it as, even with supersu, was more of a vunerability since I wasn't really using it.
Fast foward a month, I attempted to update my software and was denied with the reason that my device was custom.
Some important info:
- I'm running Android Jelly Bean 4.3, that has never been updated.
- I've attempted a factory reset through the phones recovery mode and made no difference.
- My KNOX waranty value is 0x0, and I would like to keep it that way if possible.
- Phone is factory unlocked.
Also, I've though of using Odin to flash the firmware back, but then I read that there is a possible that KNOX warranty gets triggered, even with a samsung official rom, is this true or am I safe to use it?
My objective is to have my phone back to factory settings (this means wannan xposed is out of the question), in order to be able to update my phone and keep using it, and while there is a lot of similar threads around, most of them reffer to GT-I9505 and GT-I9500 and mine is GT-I9506, which leaves me in somewhat of a doubt wether I should follow those or not.
Thank you for your time.
Diaz_ said:
So, a few months ago I decided to root my phone with towelroot to give a try on a few root applications, as i was curious, but after that, I decided to remove through supersu it as, even with supersu, was more of a vunerability since I wasn't really using it.
Fast foward a month, I attempted to update my software and was denied with the reason that my device was custom.
Some important info:
- I'm running Android Jelly Bean 4.3, that has never been updated.
- I've attempted a factory reset through the phones recovery mode and made no difference.
- My KNOX waranty value is 0x0, and I would like to keep it that way if possible.
- Phone is factory unlocked.
Also, I've though of using Odin to flash the firmware back, but then I read that there is a possible that KNOX warranty gets triggered, even with a samsung official rom, is this true or am I safe to use it?
My objective is to have my phone back to factory settings (this means wannan xposed is out of the question), in order to be able to update my phone and keep using it, and while there is a lot of similar threads around, most of them reffer to GT-I9505 and GT-I9500 and mine is GT-I9506, which leaves me in somewhat of a doubt wether I should follow those or not.
Thank you for your time.
Click to expand...
Click to collapse
Flashing a stock rom trough Odin will NOT trip Knox. So just go ahead and flash the firmware you want.
Lennyz1988 said:
Flashing a stock rom trough Odin will NOT trip Knox. So just go ahead and flash the firmware you want.
Click to expand...
Click to collapse
Alright, I assume the proccess is about the same as on the other versions.
Also, should I flash 4.4.2 instead of 5.0.1? The reason I ask is due to this thread.
Update: I flashed 4.4.2 with Odin3 3.10, and it went smooth and knox is still safe, however, for some reason, so thank you Lennyz1988 for the reassurance .
However, I'm not able to update to 5.0.1 Lolipop through OTA, as attempting to update states that im fully up to date.
My phone is running as NL (T-Mobile), factory unlocked and due to my quick research, seems that there is no official OTA update for it. Is it correct or am I looking in the wrong place to update my phone?

Even after Odin flash stock, cannot unroot! Partial root persists. Help?

Help please.
I want to fully unroot my Galaxy S7 Edge (SC-02H version, but I think this is not relevant).
I tried flashing back to stock with Odin (both latest version, as well as a previous one) but some kind of "partial root" still remains.
Always complete flash (AP, BL, CP, CSC).
I know some leftover from Root is there because whenever I open Samsung Web Browser and try to "Turn on Secret Mode", I get an error message saying "Root Detected(...)"
BUT, if I install SuperSU from Google Play, and try to run the app, it stops right after being started, saying there is NO ROOT detected.
I even tried re-flashing stock, flashing twrp, flashing supersu just for the sake of using the SuperSU App to "cleanup to unroot". When I did that, by the way, I chose "Yes" for both optional steps (try to recover stock recovery, something like that) so after the unroot cleaning process was supposedly done, the phone went into a bootloop. At that point I entered Download Mode and once more flashed stock.
But for my surprise, after initial setup, Samsung Web Browser STILL SAYS I am rooted!
How can I really completely revert back to stock?
PS- I tried installing Samsung Smart Switch, but the new version cannot reinitialize devices anymore! (And it is impossible to find an older version on the web). So with Smart Switch, there is no way of reverting back to stock anymore..
gamekill said:
Help please.
I want to fully unroot my Galaxy S7 Edge (SC-02H version, but I think this is not relevant).
I tried flashing back to stock with Odin (both latest version, as well as a previous one) but some kind of "partial root" still remains.
Always complete flash (AP, BL, CP, CSC).
I know some leftover from Root is there because whenever I open Samsung Web Browser and try to "Turn on Secret Mode", I get an error message saying "Root Detected(...)"
BUT, if I install SuperSU from Google Play, and try to run the app, it stops right after being started, saying there is NO ROOT detected.
I even tried re-flashing stock, flashing twrp, flashing supersu just for the sake of using the SuperSU App to "cleanup to unroot". When I did that, by the way, I chose "Yes" for both optional steps (try to recover stock recovery, something like that) so after the unroot cleaning process was supposedly done, the phone went into a bootloop. At that point I entered Download Mode and once more flashed stock.
But for my surprise, after initial setup, Samsung Web Browser STILL SAYS I am rooted!
How can I really completely revert back to stock?
PS- I tried installing Samsung Smart Switch, but the new version cannot reinitialize devices anymore! (And it is impossible to find an older version on the web). So with Smart Switch, there is no way of reverting back to stock anymore..
Click to expand...
Click to collapse
That's normal.
You're probably already completely unrooted.
The reason secret mode won't work because it detect knox flag is already tripped, which happen when you root the first time.
Once Knox flag is tripped, it cannot be reverse.
Sent from my SM-G935F using Tapatalk
NonXtreme said:
That's normal.
You're probably already completely unrooted.
The reason secret mode won't work because it detect knox flag is already tripped, which happen when you root the first time.
Once Knox flag is tripped, it cannot be reverse.
Click to expand...
Click to collapse
Oh really? Nice to know that.
So Samsung says a tripped knox is "root" while that is not actually accurate. Thanks!
PS Personally I do not care about knox, have no use for that. But I am doing all this temporary unroot thing to finally maybe get my phone sim-unlocked. I have been trying with some people over the net, but the unlock always fail at the end and maybe it was failing because of custom recovery and root. Well anyway, I will try the unlock again later, now stock and unrooted. Hope it goes well.

Categories

Resources