Hey
I have a big problem with my galaxy S4 (i9505). I rooted it yesterday with CF Auto root and installed twrp. Then I wanted to install miui, formatted my whole internal storage, and then it didn’t worked. So now I have a phone without os. When I try to install the stock firmware through Origin, it says “failed”.
Log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMGA_I9505OXABMGA_I9505XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl2.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
The phone is still in dw. Mode and says “SW REV. CHECK FAIL : fused : 3 , Binary : 1”. To leave the dw. Mode I have to turn it off. At the next reboot it says “Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.”, but I have never seen/ found a recovery mode in kies. So I flashed twrp again. If I try to flash a firmware through twrp, it seems to work, but when it is restarting and the Samsung Galaxy S4 screen shows up, it says “kernel is not seandroid set warranty kernel” at the top, then the screen gets black and nothing happens, but I can still get into download or recovery mode…
I tried every USB Port I have, and 2 different stock firmware versions (4.2 and 4.3). The firmware I tried to flash through twrp was Hyperdrive RLS10
Has anyone an idea what I could do? I have no idea- is it bricked?
Thanks for your help
It's failing on bootloader so I think you have new bootloader that you can't downgrade ROMS. If you go to download mode (power +volume down) can you see a line about KNOX? If so you have new bootloader and can only flash firmware with same bootloader, MH8 and newer (I think).
You could always download (using PC and ext sd card) another custom ROM and fash via recovery so you at least have a working phone.
Sent from my GT-I9505 using XDA Premium HD app
Obagleyfreer said:
It's failing on bootloader so I think you have new bootloader that you can't downgrade ROMS. If you go to download mode (power +volume down) can you see a line about KNOX? If so you have new bootloader and can only flash firmware with same bootloader, MH8 and newer (I think).
You could always download (using PC and ext sd card) another custom ROM and fash via recovery so you at least have a working phone.
Sent from my GT-I9505 using XDA Premium HD app
Click to expand...
Click to collapse
Thanks for your answer-
I have these lines in download mode;
Odin Mode
Product Name: gt i9505
Current Binary: custom
System Status: custom
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
CSB- Config- LSB: 0x30
Write Protection: enable
Emmc Brust mode enable
Yes, but as I said, when I try to Flash a Rom its Not booting....
And I already tried to flash the new one (M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5), this should be the 4.3...
No you are flashing the wrong firmware.
You have an i9505 not an M919!
Go here and flash 4.3 MJ5 firmware in Odin and you will be good to go
Sent from my GT-I9505 using XDA Premium HD app
Thank you very much, now everything is working fine! Thanks for your help!!!!
urgent
please i am having the same issue and i think i havent download the right firmware.
tried flashing different rooms but getting the aboot fail.
model is also i9505
firmware btu 19505xxuemkf
please help
---------- Post added at 08:02 PM ---------- Previous post was at 07:55 PM ----------
this is the log from odin
<ID:0/006> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMKF_I9505BTUEMK5_I9505XXUEMKF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:1/005> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:1/005> Odin v.3 engine (ID:5)..
<ID:0/003> File analysis..
<ID:1/005> File analysis..
<ID:1/005> SetupConnection..
<ID:0/003> SetupConnection..
<ID:1/005> Initialzation..
<ID:1/005> Get PIT for mapping..
<ID:1/005> Firmware update start..
<ID:1/005> sbl1.mbn
<ID:1/005> NAND Write Start!!
<ID:1/005> sbl2.mbn
<ID:1/005> sbl3.mbn
<ID:1/005> rpm.mbn
<ID:1/005> aboot.mbn
<ID:1/005> FAIL! (Auth)
---------- Post added at 08:06 PM ---------- Previous post was at 08:02 PM ----------
galvinlurv said:
please i am having the same issue and i think i havent download the right firmware.
tried flashing different rooms but getting the aboot fail.
model is also i9505
firmware btu 19505xxuemkf
please help
---------- Post added at 08:02 PM ---------- Previous post was at 07:55 PM ----------
this is the log from odin
<ID:0/006> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMKF_I9505BTUEMK5_I9505XXUEMKF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:1/005> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:1/005> Odin v.3 engine (ID:5)..
<ID:0/003> File analysis..
<ID:1/005> File analysis..
<ID:1/005> SetupConnection..
<ID:0/003> SetupConnection..
<ID:1/005> Initialzation..
<ID:1/005> Get PIT for mapping..
<ID:1/005> Firmware update start..
<ID:1/005> sbl1.mbn
<ID:1/005> NAND Write Start!!
<ID:1/005> sbl2.mbn
<ID:1/005> sbl3.mbn
<ID:1/005> rpm.mbn
<ID:1/005> aboot.mbn
<ID:1/005> FAIL! (Auth)
Click to expand...
Click to collapse
Thanks for your answer-
I have these lines in download mode;
Odin Mode
Product Name: gt i9505
Current Binary: custom
System Status: custom
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
CSB- Config- LSB: 0x30
Write Protection: enable
Emmc Brust mode enable
start 224,1440
sw rev. checkfail: fused:4 binary: 3
galvinlurv said:
please i am having the same issue and i think i havent download the right firmware.
tried flashing different rooms but getting the aboot fail.
model is also i9505
firmware btu 19505xxuemkf
please help
---------- Post added at 08:02 PM ---------- Previous post was at 07:55 PM ----------
this is the log from odin
<ID:0/006> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMKF_I9505BTUEMK5_I9505XXUEMKF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:1/005> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:1/005> Odin v.3 engine (ID:5)..
<ID:0/003> File analysis..
<ID:1/005> File analysis..
<ID:1/005> SetupConnection..
<ID:0/003> SetupConnection..
<ID:1/005> Initialzation..
<ID:1/005> Get PIT for mapping..
<ID:1/005> Firmware update start..
<ID:1/005> sbl1.mbn
<ID:1/005> NAND Write Start!!
<ID:1/005> sbl2.mbn
<ID:1/005> sbl3.mbn
<ID:1/005> rpm.mbn
<ID:1/005> aboot.mbn
<ID:1/005> FAIL! (Auth)
---------- Post added at 08:06 PM ---------- Previous post was at 08:02 PM ----------
Thanks for your answer-
I have these lines in download mode;
Odin Mode
Product Name: gt i9505
Current Binary: custom
System Status: custom
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
CSB- Config- LSB: 0x30
Write Protection: enable
Emmc Brust mode enable
start 224,1440
sw rev. checkfail: fused:4 binary: 3
Click to expand...
Click to collapse
Ditto. Any help on this would be sweet. I have an s4 and am trying to flash I9505XXUENAA_I9505YXXENA7_I9505XXUENAA_HOME.tar.md5. I have official binary and system status right now.
Unable to upgrade Grand Prime 4.4.4 to 5.0.2
I have phone Samsung galaxy grand prime 530H. I tried to install lollipop firmware from sammobile
with ODIN . But I am failed. It's show these errors....
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:1/005> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:1/005> Odin engine v(ID:3.1100)..
<ID:1/005> File analysis..
<ID:0/003> File analysis..
<ID:1/005> SetupConnection..
<ID:0/003> SetupConnection..
<ID:1/005> Initialzation..
<ID:1/005> Get PIT for mapping..
<ID:1/005> Firmware update start..
<ID:1/005> SingleDownload.
<ID:1/005> aboot.mbn
<ID:1/005> NAND Write Start!!
<ID:1/005> FAIL! (Auth)
<ID:1/005>
<ID:1/005> Complete(Write) operation failed.
Related
Hi, i didn't have enough patience for the BTU 4.4.2 soft and tried to install the NEE version but at the end of the update i got this:
<ID:0/005> Added!!<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNB9_I9505NEEFNB2_I9505XXUFNB9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> NON-HLOS.bin
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
Click to expand...
Click to collapse
Then i tried to install DBT 4.4.2 and got stuck with this:
<ID:0/005> Added!!<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNB8_I9505OXAFNB8_I9505XXUFNB8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
Click to expand...
Click to collapse
What should i do next except going to service?
THX in advance
grofudaniel said:
Hi, i didn't have enough patience for the BTU 4.4.2 soft and tried to install the NEE version but at the end of the update i got this:
Then i tried to install DBT 4.4.2 and got stuck with this:
What should i do next except going to service?
THX in advance
Click to expand...
Click to collapse
How did you start your phone in download mode? Via power menu or did you hold volume down and power button?
Very important is:
use only the two button combo.
In Odin untick autoreboot.
Start windows task manager and stop all Kies processes.
Use only the original Samsung USB cable.
If all that not works try another USB port.
And do not remove your phone from PC before Odin says PASS.
When Odin shows pass, remove the phone and hold the power button until it reboots.
I tried different ports with different softs and different data cables but no results.
Instead, i tried install nee from my laptop and it worked from the first time.
So, i supose it's from my pc's drivers.
i receive it form customer hanfg on samsung logo , he say he try by odian to upload some file !!!
so i flash it all time error , but just succed on 4.4.2 after flash phone hang on samsung logo
and i can't enter to wipe device or to install stuck rom with sd card ,when i try i get on menu this photo
(recovery is not seandroid enforcing)
hitibiti said:
i receive it form customer hanfg on samsung logo , he say he try by odian to upload some file !!!
so i flash it all time error , but just succed on 4.4.2 after flash phone hang on samsung logo
and i can't enter to wipe device or to install stuck rom with sd card ,when i try i get on menu this photo
(recovery is not seandroid enforcing)
Click to expand...
Click to collapse
Hi,
It seems like you have a soft brick follow this guide
http://forum.xda-developers.com/showthread.php?t=2265477
Make sure you use the right PIT and the right stock rom for your phone
MAX 404 said:
Hi,
It seems like you have a soft brick follow this guide
http://forum.xda-developers.com/showthread.php?t=2265477
Make sure you use the right PIT and the right stock rom for your phone
Click to expand...
Click to collapse
thx for answer
i try still same problem , but itès strange i canèt wite any forware om it he just accept
I337MVLUFNE1_I337MOYAFNE2_I337MVLUFNE1_HOME.tar (4.4.2)
even other 4.4.2 from other provider can't accept it
also try 4.3 !!!!
any other suggestion ?
You need to give us more details. Post the Odin log here.
hitibiti said:
thx for answer
i try still same problem , but itès strange i canèt wite any forware om it he just accept
I337MVLUFNE1_I337MOYAFNE2_I337MVLUFNE1_HOME.tar (4.4.2)
even other 4.4.2 from other provider can't accept it
also try 4.3 !!!!
any other suggestion ?
Click to expand...
Click to collapse
Lennyz1988 said:
You need to give us more details. Post the Odin log here.
Click to expand...
Click to collapse
Hi
As Lennyz1988 said more detail , post log.......
flashed ok still same problem with this version ; I337MVLUFNE1_I337MOYAFNE2_I337MVLUFNE1_HOME.tar
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUFNE1_I337MOYAFNE2_I337MVLUFNE1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> modem.bin
<ID:0/005> NON-HLOS.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
Click to expand...
Click to collapse
now i try this version with pit file
I337_16GB.pit
I337MVLUEMK6_I337MOYAEMK6_I337MVLUEMK6_HOME.tar
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUEMK6_I337MOYAEMK6_I337MVLUEMK6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> NON-HLOS.bin
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
now i try with
I337_16GB.pit
AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> persdata.img.ext4
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Click to expand...
Click to collapse
hell guys i want install stock rom i was on phoenix rom i download a rom to put via odin.
always stuck on this
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505VJUGNI2_I9505ZTOGNI2_I9505VJUGNI2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
i need help fast as posible please
Different usb cable
Different usb port
Or maybe a stock 4.4.2 rom if you were on 4.4.2 kitkat.
Or a stock 4.4.2 or stock 4.3 if you were on 4.3 jellybean.
In short
Latest Kitkat over kitkat
Kitkat/Jellybean over jellybean.
Sent from my GT-I9500 using XDA Free mobile app
So, I've had horrible battery and performance issues. After several factory resets, and lots of troubleshooting I decided to try flashing the stock firmware via Odin. it complete with the below log, but now it boots all the way to the lock screen (not the setup wizard) and then flickers for a second and reboots.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910TUVU1ANIH_N910TTMB1ANIH_N910TUVU1ANIH_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> modem.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
<ID:0/006> Added!!
<ID:0/006> Removed!!
<ID:0/006> Added!!
Nevermind. I didn't realize that wouldn't wipe data and I still needed to do it in recovery. After doing that it boots fine.
Hello
I recently upgraded my samsung galaxy S5 (G900F) to android 5. I downloaded the firmware from sammobile a few weeks ago and it's been working great. Since I live in South Africa, the updates take quite a while to reach us, and finally they're here. I downloaded the original 4.4.2 firmware so that I can upgrade my firmware from the phone itself (Thinking it would be best that way). The version I'm trying to install is this-
"G900FXXU1ANG2_G900FOXE1ANI2_G900FXXU1ANG2_HOME.ta r.md5"
That's the name of the md5 file I'm using. When I click "Start" in Odin, it takes a few minutes to do a few things and then all of a sudden:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1ANG2_G900FOXE1ANI2_G900FXXU1ANG2_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006> FAIL! (Ext4)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone screen it says:
ODIN: Invalid ext4 image
Please help!!
I successfully downgraded back to 4.4.2.
Ensure that you are not using an USB HUB nor other cable than original...
S5 tends to be a little stuborn on that LOL