Related
I rooted my device using the motochopper (thank djrbliss!) and all was going fine, until one day I rebooted my device and I couldn't boot to Android! Odin mode and recovery (Vol down and up, respectively) work, but when booting normally, the Samsung Galaxy S4 logo shows, and then fades to black. The phone is not off, because the blue LED comes on after about 30 seconds, and stays on. I thought I would go into recovery (Vol up) and choose factory reset. I did, but the problems stayed the same. I have the i337m (telus/koodo) and I thought I could download a stock image and flash via Kies or Odin, but can't find a Canadian dump! I don't want to flash an AT&T version because I'm afraid it may mess up my radio or lock the bootloader (I heard the bl was unlocked on 'm' variants) Please help!
EDIT: Not even Kies' Firmware upgrade and Initialization is working, it says "Please check the model name and enter it."
EDIT 2: Even Samsung's Call Centre rep. says to return it to the Koodo retailer.
EDIT 3: Finally! I installed TWRP via Odin, and CM 10.1 via TWRP. Now all I need is the stock Canadian recovery image.
Fixed. Mods please delete this thread.
ahhh man. this is scaring me a bit since no one really reported a brick. I dont recommend flashing anything but the version meant for you. hmmm might need to patiently wait a little. or try the international version but is your version the snap dragon or the octacore.
hyghonryce said:
ahhh man. this is scaring me a bit since no one really reported a brick. I dont recommend flashing anything but the version meant for you. hmmm might need to patiently wait a little. or try the international version but is your version the snap dragon or the octacore.
Click to expand...
Click to collapse
The Canadian Snapdragon
Ah okay, I installed TWRP in Odin and then CM. It works, but Wifi and a bunch of other stuff is borked. And Kies still returns with the same error message. I can't get stock at all. If anyone has a stock i337m image, please help!
theo1998 said:
Ah okay, I installed TWRP in Odin and then CM. It works, but Wifi and a bunch of other stuff is borked. And Kies still returns with the same error message. I can't get stock at all. If anyone has a stock i337m image, please help!
Click to expand...
Click to collapse
Hmmm TWRP does work on your device right now which is good. Maybe you can ask someone with the device. (your friends or what ever) and create a back up of their phone. after that you can flash it back onto yours.
or yeah with a stock i337m
edit : if u dont want stock . but wants it fixed.
" CM10.1 Now available for Canadian Variants "
Okay, it's fixed. Kies doesn't work on Windows 8. Mods please delete this thread.
Why do you wanna have your thread deleted ?
Why do you wanna have your thread deleted, it might be useful to some people like me trying to find information about the KDO galaxy s4 SGH-I337M, which seams to be pretty scarce around.
That said, i need help to root that phone, i cant find the right version of CWM to flash. is the Canada/Bell one work on the Koodo s4 ?
maxcomx said:
Why do you wanna have your thread deleted, it might be useful to some people like me trying to find information about the KDO galaxy s4 SGH-I337M, which seams to be pretty scarce around.
That said, i need help to root that phone, i cant find the right version of CWM to flash. is the Canada/Bell one work on the Koodo s4 ?
Click to expand...
Click to collapse
The bell cwm will work on koodo
Sent from my SAMSUNG-SGH-I727
I have the koodo i337m so if your stuck feel free to pm me. I've been around for awhile lol.
Sent from my SGH-I337M using xda app-developers app
Psykologikal said:
I have the koodo i337m so if your stuck feel free to pm me. I've been around for awhile lol.
Sent from my SGH-I337M using xda app-developers app
Click to expand...
Click to collapse
Hi , thanks for offering help.
so i'm looking to root my koodo sgh-i337m, i've root other phone before, and i know a little adb, and cwm, but up to now it didnt work flashing cwm with odin and that cwm that i found for the i337m. I'm still searching
I use CF-Auto-Root to root my i337m and it works great. I have had no problems with it.
Sent from my SGH-I337M using xda app-developers app
I just picked up an s4 from att today. Ive been playing with it for about an hour and I definitely want to root the phone and remove all of the bloatware. Ive read online that there is no way to fully remove all traces of rooting this phone when needed for warranty reasons. Ive also read that att will still honor the warranty even if the phone is rooted. Does anyone have any info on this? Im experiencing a little lag here and there with the phone and am honestly not as jazzed about it as I thought I would be. If I root the phone will I still be able to switch for another phone if I choose to within 14 days and will att honor my warranty if I keep the phone and something goes wrong with it? Im in the US.
Well I had the s4 from release day,and have both root and a custom ROM.a couple weeks ago my WiFi decided it didn't wanna live no more so I flashed stock ROM through Odin and WiFi was still not working so I took my phone into the warranty center he flashed stock ROM again and it still didn't work so he just swapped it out for a new phone right there....
Long story short just unroot and flash stock ROM and you should be good to go
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
ignaciocazares said:
Well I had the s4 from release day,and have both root and a custom ROM.a couple weeks ago my WiFi decided it didn't wanna live no more so I flashed stock ROM through Odin and WiFi was still not working so I took my phone into the warranty center he flashed stock ROM again and it still didn't work so he just swapped it out for a new phone right there....
Long story short just unroot and flash stock ROM and you should be good to go
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
That can only be done if the phone hasn't been updated to mf3. There is no flashable firmware for that one.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Yes forgot to mention that .also for anybody with mf3 firmware try to get a warranty exchange if you don't mind getting back a refurbished device and there's a possibility you will get a non mf3 phone
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
ignaciocazares said:
Yes forgot to mention that .also for anybody with mf3 firmware try to get a warranty exchange if you don't mind getting back a refurbished device and there's a possibility you will get a non mf3 phone
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
I have heard that some members received replacements w MF3 so it is pretty much luck of the draw.
Sent from my SAMSUNG-SGH-I337 using Forum Runner
norcal61 said:
... Ive also read that att will still honor the warranty even if the phone is rooted. Does anyone have any info on this?
Click to expand...
Click to collapse
I asked ATT customer service if rooting voided the warranty. I was told rooting does not void the warranty unless rooting caused the damage. The example the rep gave me was: If you root and phone overheats as a result of rooting, then they wouldn't cover that.
Please read forum rules before posting
Questions and Help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Thanks for all of the replies! They're very helpful. How can I tell if my s4 has the mf3 firmware and what exactly is the difference between mf3 and the other?
Just wanted to add that the last three digits for my baseband are mdl so im assuming I dont have the mf3 software as of yet. I have a software update available. Should I update or just root the phone as it is now?
norcal61 said:
Just wanted to add that the last three digits for my baseband are mdl so im assuming I dont have the mf3 software as of yet. I have a software update available. Should I update or just root the phone as it is now?
Click to expand...
Click to collapse
Do not update, root and rename the files associated with updating.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
norcal61 said:
Just wanted to add that the last three digits for my baseband are mdl so im assuming I dont have the mf3 software as of yet. I have a software update available. Should I update or just root the phone as it is now?
Click to expand...
Click to collapse
If you want to be able to root AND flash ROMs, do not update to MF3. There is no method for loading a custom recovery for phones that have updated to MF3.
There is a thread in the General section about rooting an MF3 phone, but at this point you won't be able to flash a ROM.
HiTideBlastoise said:
Do not update, root and rename the files associated with updating.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Thank you, forgive my ignorance but could you tell me exactly which files I need to rename and what I should rename them to?
norcal61 said:
Thank you, forgive my ignorance but could you tell me exactly which files I need to rename and what I should rename them to?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2268946
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
I cracked my screen and the replacement S4 came with MF3.
Sent from my GT-P5110 using XDA Premium HD app
SO i was a fooled and i tried to flash my MF3 S4 with TRWP. Make a long story short my phone was soft bricked. I was unable to go into recovery mode, only Odin mode. So after reading a bunch of posts and thinking that my phone was bricked until samsung released official MF3 recovery image , i gave up. My friend at best buy called me and said that they now have "Samsung Experience Centers and they can Flash your phone to factory stock. I called Samsung and verified. i immediately brought the phone over and after explaining that "Kies" Ruined my phone they were able to flash my phone now it is working. I will go into more detail soon. But those who were in my situation, rest assured there is a solution now.
Super Evan said:
SO i was a fooled and i tried to flash my MF3 S4 with TRWP. Make a long story short my phone was soft bricked. I was unable to go into recovery mode, only Odin mode. So after reading a bunch of posts and thinking that my phone was bricked until samsung released official MF3 recovery image , i gave up. My friend at best buy called me and said that they now have "Samsung Experience Centers and they can Flash your phone to factory stock. I called Samsung and verified. i immediately brought the phone over and after explaining that "Kies" Ruined my phone they were able to flash my phone now it is working. I will go into more detail soon. But those who were in my situation, rest assured there is a solution now.
Click to expand...
Click to collapse
And what firmware did that flash was it MF3 or MDL?
Sent From My Galaxy S 4 SAMSUNG-SGH-I337 Running On New Deadly Venom v8.0.0
I know they can flash MF3, and they probably did/will.
Sent from my Samsung Galaxy S4 (SGH-i337) via Tapatalk 4
So how is it?
Yes it was the MF3 the latest att over the air update. I used Loki to root and that worked. Then I used "Goo manager to install clock work/TWRP and that's when I got stuck in Odin mode. I was no longer able to go into recovery mode.
Sent from my LG-E980 using xda app-developers app
Super Evan said:
Yes it was the MF3 the latest att over the air update. I used Loki to root and that worked. Then I used "too manager to install clock work and that's when I got stuck in Odin mode. I was no longer able to go into recovery mode.
Sent from my LG-E980 using xda app-developers app
Click to expand...
Click to collapse
You do know that there is no custom recovery of MF3 yet. Only root.
That is true only a root exists. However best buy flashed me back to stock
Sent from my LG-E980 using xda app-developers app
BRB Headed to Local BestBuy.......I have a softbricked S4 running MF3. Will report back.
Okay good luck. If u can get your screen to show the kies triangle repair message it will be best .
Sent from my LG-E980 using xda app-developers app
Also if they guy looks like he doesn't know what he is doing have him call Samsung technical support. The best buy rep that did mine initially said he couldn't do, then he called Samsung technical support and they guided him through the process and it finally flashed.
Sent from my LG-E980 using xda app-developers app
Super Evan said:
Also if they guy looks like he doesn't know what he is doing have him call Samsung technical support. The best buy rep that did mine initially said he couldn't do, then he called Samsung technical support and they guided him through the process and it finally flashed.
Sent from my LG-E980 using xda app-developers app
Click to expand...
Click to collapse
Dude, don't try to flash a custom recovery. You're only going to be able to go back to best buy so many times before they catch on.
Your right . I am not flashing it again till a working/proven method is found . I went 2 weeks with no phone.:thumbdown::thumbdown:
Sent from my LG-E980 using xda app-developers app
We need to find out what method Best Buys is using to flash MF3. It is possible that Samsung has made available (to Best Buy Samsung locations) full MF3 firmware, but what are they using to flash it with...ODIN?
scott14719 said:
We need to find out what method Best Buys is using to flash MF3. It is possible that Samsung has made available (to Best Buy Samsung locations) full MF3 firmware, but what are they using to flash it with...ODIN?
Click to expand...
Click to collapse
Ya, my question too. Hopefully sometime can check what they're using
---------- Post added at 06:59 PM ---------- Previous post was at 06:56 PM ----------
Super Evan said:
Your right . I am not flashing it again till a working/proven method is found . I went 2 weeks with no phone.:thumbdown::thumbdown:
Sent from my LG-E980 using xda app-developers app
Click to expand...
Click to collapse
Your OP stated you'd give more details. Do you know what software they used to flash the rom?
Super Evan said:
SO i was a fooled and i tried to flash my MF3 S4 with TRWP. Make a long story short my phone was soft bricked. I was unable to go into recovery mode, only Odin mode. So after reading a bunch of posts and thinking that my phone was bricked until samsung released official MF3 recovery image , i gave up. My friend at best buy called me and said that they now have "Samsung Experience Centers and they can Flash your phone to factory stock. I called Samsung and verified. i immediately brought the phone over and after explaining that "Kies" Ruined my phone they were able to flash my phone now it is working. I will go into more detail soon. But those who were in my situation, rest assured there is a solution now.
Click to expand...
Click to collapse
It would be great if you could check with your friend at Best Buy and see if he has any details about how the MF3 firmware is being flashed.
I will ask my friend if he can get more details and possible pictures. From what I know special "Tools" where provided by by Samsung. Initially the Best Buy rep that flashed my phone did not know what to do he then called Samsung technical support and they were able to remote control his PC and finish the flash. I wasn't able to see the program he was using as I was behind the PC screen and could not get around.
Sent from my LG-E980 using xda app-developers app
Its called "Samsung Smart" its what the att store uses I got the guy to tell me what it was. He said that samsung reps came in and installed the software on all of there computers. I hope we can get someone who works there to throw the software on a usb stick. It needs to be leaked. I am soooooo pissed off right now because I just got a new one from the device support center yesterday and it came with mdl on it. Then the damn thing updated itself within 24hrs. It downloaded it and installed it without my consent. Im going to brick it on purpose and take it back to the att device support center and they will probably try and reflash it but it wont work cause all they have is the samsung smart exe program with the mdl fimware and im sure its nkt going to downgrade it so they will end up giving me a new phone again and hopefully it will have mdl on it first thing in the morning.
Struck out at my nearest Best Buy this evening. The guy at the Samsung counter didn't seem to know much about them, he did plug it in but never launched any applications to try and reflash it all he was using was a laptop and stock USB cable. There are several other stores in my area (Houston TX) I'll run out tomorrow and try my luck again. I'll report back on any applications they use and will pick their brains for info if I'm successful getting it restored to stock. To be continued.......
---------- Post added at 10:14 PM ---------- Previous post was at 10:07 PM ----------
Super Evan said:
Also if they guy looks like he doesn't know what he is doing have him call Samsung technical support. The best buy rep that did mine initially said he couldn't do, then he called Samsung technical support and they guided him through the process and it finally flashed.
Sent from my LG-E980 using xda app-developers app
Click to expand...
Click to collapse
Man I tore out of the house earlier headed to BB before I saw this post. I'll definitely try this approach tomorrow.
TXT930 said:
Struck out at my nearest Best Buy this evening. The guy at the Samsung counter didn't seem to know much about them, he did plug it in but never launched any applications to try and reflash it all he was using was a laptop and stock USB cable. There are several other stores in my area (Houston TX) I'll run out tomorrow and try my luck again. I'll report back on any applications they use and will pick their brains for info if I'm successful getting it restored to stock. To be continued.......
---------- Post added at 10:14 PM ---------- Previous post was at 10:07 PM ----------
Man I tore out of the house earlier headed to BB before I saw this post. I'll definitely try this approach tomorrow.
Click to expand...
Click to collapse
Try calling a few Best Buys before hand and ask if they are capable of flashing your Samsung S4. When i called i said that Samsung Customer Care informed me to go to a Best Buy with a Samsung Experience Shop and they would be able to Flash my phone back to stock. Good luck.
JohnMonsour said:
Its called "Samsung Smart" its what the att store uses I got the guy to tell me what it was. He said that samsung reps came in and installed the software on all of there computers. I hope we can get someone who works there to throw the software on a usb stick. It needs to be leaked. I am soooooo pissed off right now because I just got a new one from the device support center yesterday and it came with mdl on it. Then the damn thing updated itself within 24hrs. It downloaded it and installed it without my consent. Im going to brick it on purpose and take it back to the att device support center and they will probably try and reflash it but it wont work cause all they have is the samsung smart exe program with the mdl fimware and im sure its nkt going to downgrade it so they will end up giving me a new phone again and hopefully it will have mdl on it first thing in the morning.
Click to expand...
Click to collapse
Dang that sucks. Good Luck Tomorrow.
So as you can see I finally figured out how to get out of the scary Download Mode screen on my gs4. Well I need some help trying to get my recovery back to normal. I tried to install TWRP with Goomanager and it didn't do it correctly or maybe its just me. So after TWRP downloaded I went to go install it and it put me in DL mode. I panicked and thought I bricked my phone and I did power button+volume down+home button and it restarted and booted up Android. Now when I try and go into recovery it throws me back into Download mode and I have to do that button sequence to get out. Its almost like I deleted my recovery so Idk what to do... :'( if anyone can try and help it would be greatly appreciated! Thank you!!!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
ToastyyX said:
So as you can see I finally figured out how to get out of the scary Download Mode screen on my gs4. Well I need some help trying to get my recovery back to normal. I tried to install TWRP with Goomanager and it didn't do it correctly or maybe its just me. So after TWRP downloaded I went to go install it and it put me in DL mode. I panicked and thought I bricked my phone and I did power button+volume down+home button and it restarted and booted up Android. Now when I try and go into recovery it throws me back into Download mode and I have to do that button sequence to get out. Its almost like I deleted my recovery so Idk what to do... :'( if anyone can try and help it would be greatly appreciated! Thank you!!!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
What Firmware you On MF3 Or MDL?
I am on MF3.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
ToastyyX said:
So as you can see I finally figured out how to get out of the scary Download Mode screen on my gs4. Well I need some help trying to get my recovery back to normal. I tried to install TWRP with Goomanager and it didn't do it correctly or maybe its just me. So after TWRP downloaded I went to go install it and it put me in DL mode. I panicked and thought I bricked my phone and I did power button+volume down+home button and it restarted and booted up Android. Now when I try and go into recovery it throws me back into Download mode and I have to do that button sequence to get out. Its almost like I deleted my recovery so Idk what to do... :'( if anyone can try and help it would be greatly appreciated! Thank you!!!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I just got my S4 and am still catching up on all the reading, are you on MF3 or MDL? I think those are the two. I don't think your suppose to get TWRP from Goomanager it has to have "Loki"or something like that if not mistaken. I haven't read enough to answer and don't want to give you bad advise but good luck.
ToastyyX said:
I am on MF3.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Hate to say this my Friend as of now you are without a recovery and there's no way to get that since there isn't any Odin for MF3 Only thing i
can tell you is go to Bestbuy they can recover your Rom back to the stock way it was lot's had this happen to them and they got it fix for free in Bestbuy, Cause
since MF3 Bootloader is locked there's no way to get your Recovery back!
The button sequence is not what's rebooting you out of download. Just holding the power for 10-15 secs does that. When the phone is off press and hold VOL+HOME and press and hold POWER till first splash screen. ( mine is the custom screen). Then release POWER only. Holding VOL+HOME till you see the first TWRP logo. You don't have to really hold it that long. Ussually just till the small blue writing in top left corner pops up. Works better for me to hold till the blue TWRP logo. Then release both buttons. Should take 5-8 secs then TWRP options screen will be up. If you are ever in download mode and you are not flashing with Odin or installing or really doing anything besides thinking "damnit I wanted recovery not ODIN". Then hold power till it shuts down and then start recovery boot sequence. Or hell just pull the battery. Want hurt as long as no installing , flashing, or upgrading or nose picking is going on.
Sent from my SAMSUNG-SGH-I337 on GRAVITON v1.5 w/Ausdim kernel and turbo zram using Xparent Skyblue Tapatalk 2
ToastyyX said:
I am on MF3.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Red this My friend read thru everything so you see What MF3 is all about! http://forum.xda-developers.com/showthread.php?t=2314494
Ah okay well that's what I get for being a noob trying to mess around and think I know what I am doing. Well I appreciate your help and thanks for your advice on going to bestbuy. I will have to do that. You said they can do that for free?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
ToastyyX said:
Ah okay well that's what I get for being a noob trying to mess around and think I know what I am doing. Well I appreciate your help and thanks for your advice on going to bestbuy. I will have to do that. You said they can do that for free?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
That's Correct!
---------- Post added at 07:56 PM ---------- Previous post was at 07:54 PM ----------
ToastyyX said:
Ah okay well that's what I get for being a noob trying to mess around and think I know what I am doing. Well I appreciate your help and thanks for your advice on going to bestbuy. I will have to do that. You said they can do that for free?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Read this about Bestbuy And Good Luck My Friend!: http://forum.xda-developers.com/showthread.php?t=2435043
Venom0642 said:
That's Correct!
---------- Post added at 07:56 PM ---------- Previous post was at 07:54 PM ----------
Read this about Bestbuy And Good Luck My Friend!: http://forum.xda-developers.com/showthread.php?t=2435043
Click to expand...
Click to collapse
Excellent I cannot thank you enough for making me feel a lot better. I feel better knowing Samsung is so cool about that unlike most companies.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
ToastyyX said:
Excellent I cannot thank you enough for making me feel a lot better. I feel better knowing Samsung is so cool about that unlike most companies.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
No Problem this is what you needed to use for MF3 To be Rooted:http://forum.xda-developers.com/showthread.php?t=2473747
Then after you rooted it with that you needed this for MF3 A work around to
Flash Only Touchwiz Custom Roms!:http://forum.xda-developers.com/showthread.php?t=2448925
But i suggest if you get your phone Fixed By Bestbuy you read up on Firmware
MF3 So this don't happen to you again!
Venom0642 said:
No Problem this is what you needed to use for MF3 To be Rooted:http://forum.xda-developers.com/showthread.php?t=2473747
Then after you rooted it with that you needed this for MF3 A work around to
Flash Only Touchwiz Custom Roms!:http://forum.xda-developers.com/showthread.php?t=2448925
But i suggest if you get your phone Fixed By Bestbuy you read up on Firmware
MF3 So this don't happen to you again!
Click to expand...
Click to collapse
Excellent I sure will read up on this stuff and I guess just tell Samsung what happened and see what they can do. I appreciate all of your help. I feel so much better.
Also one other thing since you obviously know so much. What happens if at&t pushes their update out automatically like I hear they are doing and my phone is rooted. Will it break my phone?? Thx
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
ToastyyX said:
Venom0642 said:
No Problem this is what you needed to use for MF3 To be Rooted:http://forum.xda-developers.com/showthread.php?t=2473747
Then after you rooted it with that you needed this for MF3 A work around to
Flash Only Touchwiz Custom Roms!:http://forum.xda-developers.com/showthread.php?t=2448925
But i suggest if you get your phone Fixed By Bestbuy you read up on Firmware
MF3 So this don't happen to you again!
[/QUOTEExcellent I sure will read up on this stuff and I guess just tell Samsung what happened and see what they can do. I appreciate all of your help. I feel so much better.
Also one other thing since you obviously know so much. What happens if at&t pushes their update out automatically like I hear they are doing and my phone is rooted. Will it break my phone?? Thx
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Since you already got bootloader Locked with Firmware MF3 If
Bestbuy flashes you back to Stock with Everything working they will Flash MF3
back so by the 2 links i provided once you know how to do this come back and
ask cause you can freeze apps with Titanium Backup there's a few apps that
can be frozen so no AT&T Upgrade can be pushed once they are frozen plus
once you flash a custom rom AT&T Can't push a Upgrade on Custom Roms but i
can't Remember which those apps are just get your phone fixed and start
reading more you will find the answers with the search as well in XDA Good Luck!
Click to expand...
Click to collapse
Venom0642 said:
ToastyyX said:
Since you already got bootloader Locked with Firmware MF3 If
Bestbuy flashes you back to Stock with Everything working they will Flash MF3
back so by the 2 links i provided once you know how to do this come back and
ask cause you can freeze apps with Titanium Backup there's a few apps that
can be frozen so no AT&T Upgrade can be pushed once they are frozen plus
once you flash a custom rom AT&T Can't push a Upgrade on Custom Roms but i
can't Remember which those apps are just get your phone fixed and start
reading more you will find the answers with the search as well in XDA Good Luck!
Click to expand...
Click to collapse
Great until I make my way over to bestbuy I will freeze at&t DM server with titanium just in case the update gets launched and I am not messing with any of this anymore after my phone gets restored lol. I'm only going to root because that's safer thank installing a custom ROM Haha.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Venom0642 said:
ToastyyX said:
Since you already got bootloader Locked with Firmware MF3 If
Bestbuy flashes you back to Stock with Everything working they will Flash MF3
back so by the 2 links i provided once you know how to do this come back and
ask cause you can freeze apps with Titanium Backup there's a few apps that
can be frozen so no AT&T Upgrade can be pushed once they are frozen plus
once you flash a custom rom AT&T Can't push a Upgrade on Custom Roms but i
can't Remember which those apps are just get your phone fixed and start
reading more you will find the answers with the search as well in XDA Good Luck!
Click to expand...
Click to collapse
Sorry for bugging you. Should I go ahead and tell bestbuy what I did or make a believable story? Thx
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
ToastyyX said:
Venom0642 said:
Sorry for bugging you. Should I go ahead and tell bestbuy what I did or make a believable story? Thx
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Tell Them Something Like this guy Did!
Super Evan said:
SO i was a fooled and i tried to flash my MF3 S4 with TRWP. Make a long story short my phone was soft bricked. I was unable to go into recovery mode, only Odin mode. So after reading a bunch of posts and thinking that my phone was bricked until samsung released official MF3 recovery image , i gave up. My friend at best buy called me and said that they now have "Samsung Experience Centers and they can Flash your phone to factory stock. I called Samsung and verified. i immediately brought the phone over and after explaining that "Kies" Ruined my phone they were able to flash my phone now it is working. I will go into more detail soon. But those who were in my situation, rest assured there is a solution now.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Venom0642 said:
ToastyyX said:
Tell Them Something Like this guy Did!
Click to expand...
Click to collapse
Haha okay I sure will! "Kies broke my phone when I tried to update" *wink* *wink*
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Should I just tell them that I tried to update to mf3 via keys and it failed and I didn't realize until I tried to access recovery mode and it didn't come up only Odin mode? Lol I'm trying to make this sound like its not a ridiculous story.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
ToastyyX said:
Should I just tell them that I tried to update to mf3 via keys and it failed and I didn't realize until I tried to access recovery mode and it didn't come up only Odin mode? Lol I'm trying to make this sound like its not a ridiculous story.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I would go with what i posted above but you can make anything up just don't tell them you try to root phone if you know what i mean!
---------- Post added at 09:48 PM ---------- Previous post was at 09:45 PM ----------
Also go here and there's a List of Roms that Works With Safestrap One Of The Roms Is Mines Call Deadly Venom here my friend That's Once you get everything Fixed and do everything i said to do! http://forum.xda-developers.com/showthread.php?t=2428254
Please read forum rules before posting
Questions and Help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Trying to root SGH-I337 (not SGH-I337M). I found a few different chainfire downloads, but non of them seem to match my model perfectly. I tried "SuperSU-JWR66N-S005-130625-1.41.zip" which I found on a YouTube video guide, but it had errors during update and failed. Fortunately, It did not brick my device.
On this site "autoroot dot chainfire dot eu/", I found this file "CF-Auto-Root-jfltecan-jfltevl-sghi337m.zip", but it says this is for model SGH-I337M. Which I think is a Canadian model (but not sure). I don't have a "M" on the end of my SGH-I337 model name.
Can someone please point me in the right direction...
Which file should I be using and where do I find it?
Check the stickies at the top of this forum. That's all I'm going to suggest.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
HORiZUN said:
Check the stickies at the top of this forum. That's all I'm going to suggest.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
--------------------
Please know that I already looked through the FAQ and stuff at the top of the thread for a couple of hours but didn't find my answer. Anything more specific you can tell me would sure be appreciated.
bgmg said:
--------------------
Please know that I already looked through the FAQ and stuff at the top of the thread for a couple of hours but didn't find my answer. Anything more specific you can tell me would sure be appreciated.
Click to expand...
Click to collapse
---------------------------------------
Everything at the top of the discussion seems to focus on the I337M Canadian model which I don't have. I have the plain i337 USA model. I appreciate any help I can get.
Thanks,
bgmg
bgmg said:
---------------------------------------
Everything at the top of the discussion seems to focus on the I337M Canadian model which I don't have. I have the plain i337 USA model. I appreciate any help I can get.
Thanks,
bgmg
Click to expand...
Click to collapse
Check your baseband version and go to the top of the Howto Guide. you should find what you want.
SGH-I337
asfrstah said:
Check your baseband version and go to the top of the Howto Guide. you should find what you want.
Click to expand...
Click to collapse
---------------------------------
Thanks. I also just took a second look at the top of the thread like HORiZUN instructed and found a video that appears to be for my model. I'm watching it now. Between your post and the HORiZUN post, I think I may get this figured out. I'll let you know how it goes.
Thanks.
I337
installed Samsung Kies but got this error:
"Your device's current firmware version is not supported to update firmware via Kies."
My firmware is: I337UCUEMK2
I may have installed the wrong Kies version because while my device has Android 4.3 on it, it came with 4.2. I'm trying downloading the other version of Kies now. I hope it works.
I337 firmware I337UCUEMK2 root?
Both Kies 2 and Kies 3 do not support my Samsung I337 firmware I337UCUEMK2
so..I'm stuck again and don't know what to do next.
bgmg said:
Both Kies 2 and Kies 3 do not support my Samsung I337 firmware I337UCUEMK2
so..I'm stuck again and don't know what to do next.
Click to expand...
Click to collapse
You need to use this guide posted by gtj0 http://forum.xda-developers.com/showthread.php?t=2526964
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
---------- Post added at 09:47 PM ---------- Previous post was at 09:44 PM ----------
bgmg said:
installed Samsung Kies but got this error:
"Your device's current firmware version is not supported to update firmware via Kies."
My firmware is: I337UCUEMK2
I may have installed the wrong Kies version because while my device has Android 4.3 on it, it came with 4.2. I'm trying downloading the other version of Kies now. I hope it works.
Click to expand...
Click to collapse
Don't even use kies. Kies is so stupid its a copycat of iTunes that doesn't work for the life of you. At least iTunes you can upgrade.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
I337 firmware I337UCUEMK2 root?
[email protected] said:
You need to use this guide posted by gtj0 http://forum.xda-developers.com/showthread.php?t=2526964
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
---------- Post added at 09:47 PM ---------- Previous post was at 09:44 PM ----------
Don't even use kies. Kies is so stupid its a copycat of iTunes that doesn't work for the life of you. At least iTunes you can upgrade.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
---------------------------------------
well Kies was only be used to obtain all the needed USB drives and thats it according to the video I was using here: http://forum.xda-developers.com/showthread.php?t=2283918
regarding You need to use this guide posted by gtj0 http://forum.xda-developers.com/s
TO: [email protected] regards to "You need to use this guide posted by gtj0 http://forum.xda-developers.com/show....php?t=2526964"
The URL says "If you loaded the MJ6 leak, the OTA MJ9 update isn't going to work. Here's how to get it to work.", I don't know what MJ6 leak is and don't think I every loaded any such thing, so I don't think this link/guide would apply to me.
Thank you all for trying to help me. I really am listening to every word of advice you all are giving me and trying to make it work. Please continue the good support. At this point, I'm still stuck
bgmg said:
---------------------------------------
well Kies was only be used to obtain all the needed USB drives and thats it according to the video I was using here: http://forum.xda-developers.com/showthread.php?t=2283918
Click to expand...
Click to collapse
You could of just went to the Samsung website and downloaded it from there.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
---------- Post added at 10:12 PM ---------- Previous post was at 10:10 PM ----------
bgmg said:
TO: [email protected] regards to "You need to use this guide posted by gtj0 http://forum.xda-developers.com/show....php?t=2526964"
The URL says "If you loaded the MJ6 leak, the OTA MJ9 update isn't going to work. Here's how to get it to work.", I don't know what MJ6 leak is and don't think I every loaded any such thing, so I don't think this link/guide would apply to me.
Thank you all for trying to help me. I really am listening to every word of advice you all are giving me and trying to make it work. Please continue the good support. At this point, I'm still stuck
Click to expand...
Click to collapse
It will work trust me. Mj6 was a leaked att version of 4.3 then the official was mj9 before they stopped it to fix bugs and brought out mk2. It will work follow that guide. Download the mf3 emergency files flash via odin sideload mf3-mj9 then mj9-mk2 and you'll be back. Follow the guide step by step or follow the updated one ted77usa rewrote.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
I337 firmware I337UCUEMK2 root?
All,
I installed the Samsung Drivers and then completed this video: http://forum.xda-developers.com/show....php?t=2283918 which had me use the motochopper tool for the Galaxy SF. It looked like it completed successfully and rebooted my phone, but the device is still NOT rooted. It didn't work and I am not bricked either (whew!!)
hovax615,
I'm sure you realize the importance of me getting correct and not bricking my device. Please advise when you say "you'll be back", what exactly will I be back too? to my knowledge I'm already in the beginning and phone firmware has never been changed, because my phone is still not bricked and not rooted. I have never loaded MJ6 (whatever that is). My apologies for being a noob, just trying to understand and do this safely without bricking or messing something up.
It's late for me now, and I will read any replies and continue this journey in a couple of days, perhaps tomorrow.
I really appreciate your help. Please advise.
Thank you all
bgmg said:
All,
I installed the Samsung Drivers and then completed this video: http://forum.xda-developers.com/show....php?t=2283918 which had me use the motochopper tool for the Galaxy SF. It looked like it completed successfully and rebooted my phone, but the device is still NOT rooted. It didn't work and I am not bricked either (whew!!)
hovax615,
I'm sure you realize the importance of me getting correct and not bricking my device. Please advise when you say "you'll be back", what exactly will I be back too? to my knowledge I'm already in the beginning and phone firmware has never been changed, because my phone is still not bricked and not rooted. I have never loaded MJ6 (whatever that is). My apologies for being a noob, just trying to understand and do this safely without bricking or messing something up.
It's late for me now, and I will read any replies and continue this journey in a couple of days, perhaps tomorrow.
I really appreciate your help. Please advise.
Thank you all
Click to expand...
Click to collapse
Ah sorry I thought you were bricked. Never mind
Use this method to root http://forum.xda-developers.com/showthread.php?t=2473747
or use this method
http://forum.xda-developers.com/showthread.php?t=2569827
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
bgmg said:
installed Samsung Kies but got this error:
"Your device's current firmware version is not supported to update firmware via Kies."
My firmware is: I337UCUEMK2
I may have installed the wrong Kies version because while my device has Android 4.3 on it, it came with 4.2. I'm trying downloading the other version of Kies now. I hope it works.
Click to expand...
Click to collapse
If u are on MK2 trying to root..... Follow my thread http://forum.xda-developers.com/showthread.php?t=2573080 from first post there is SAFEROOT METHOD link. Is one click tool to root your mk2 phone Super easy as 1.2.3......Hope this help you to get start....... Hit THANK button If someone helped you to show your appreciation. ......... and check post #3 if u ever bricked ...I hope not... To get back to mk2 stock firmware
Swyped from MK2 Deadly Venom SS
I337UCUEMK2 Root? (My device is NOT bricked)
This firmware and baseband terminology gets confusing because early when I tried kies, samsung kies calls it firmware (I337UCUEMK2), but my "about" settings on the phone call it baseband (I337UCUEMK2). So I guess the word Baseband and Firmware are interchangeable?
In any case, I'm getting lots of great help here and feel I'm getting close to the finish line. It would seem that I now have two options to try:
1) http://forum.xda-developers.com/show....php?t=2473747 - sent by [email protected]
2) http://forum.xda-developers.com/showthread.php?t=2565758 - sent by both [email protected] and ted77usa
Does anyone one have a suggestion or preference on which of these two root methods is best (or to try first)?
bgmg said:
This firmware and baseband terminology gets confusing because early when I tried kies, samsung kies calls it firmware (I337UCUEMK2), but my "about" settings on the phone call it baseband (I337UCUEMK2). So I guess the word Baseband and Firmware are interchangeable?
In any case, I'm getting lots of great help here and feel I'm getting close to the finish line. It would seem that I now have two options to try:
1) http://forum.xda-developers.com/show....php?t=2473747 - sent by [email protected]
2) http://forum.xda-developers.com/showthread.php?t=2565758 - sent by both [email protected] and ted77usa
Does anyone one have a suggestion or preference on which of these two root methods is best (or to try first)?
Click to expand...
Click to collapse
Use the saferoot method posted by ted and I.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Root Mission Accomplished
[email protected] said:
Use the saferoot method posted by ted and I.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
---------------------------------
Safe root method worked beautifully. Thanks you both. My phone is now rooted.
My next mission is to figure out how to flash it back to factory specs (unroot), for when the day comes that I want to sell it (which is a long ways off ) and so that I can be sure I didn't put any malware on it from all the other failed attempts I made. One of those attempts involved booting to safe mode and loading a zip file from sd card. Though it failed, that attempt went pretty far. It actually wiped my phone and rebooted it. It looked like it may have applied some changes though there was some errors during the process and it did not root my phone.
If anyone can point me in the right direction or provide the link to the factory rom and process for doing it. I'm all ears
bgmg said:
---------------------------------
Safe root method worked beautifully. Thanks you both. My phone is now rooted.
My next mission is to figure out how to flash it back to factory specs (unroot), for when the day comes that I want to sell it (which is a long ways off ) and so that I can be sure I didn't put any malware on it from all the other failed attempts I made. One of those attempts involved booting to safe mode and loading a zip file from sd card. Though it failed, that attempt went pretty far. It actually wiped my phone and rebooted it. It looked like it may have applied some changes though there was some errors during the process and it did not root my phone.
If anyone can point me in the right direction or provide the link to the factory rom and process for doing it. I'm all ears
Click to expand...
Click to collapse
Ted has a nice thread in the general section with the mk2 update files and an unbrick guide in the third post that will get you back to stock
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
DeadlySin9 said:
Ted has a nice thread in the general section with the mk2 update files and an unbrick guide in the third post that will get you back to stock
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
-------------------------
Thanks DeadlySin9. I'm still earning to navigate the blog. Would you please be kind enough to send me the URL to Teds mk2 update files and the guide that will get you back to stock?