Related
***TL;DR AT THE BOTTOM***
*^*EDIT 2!!*^*
Utilizing Cerberus, I was able to get passed the boot animation into the lock screen, though the Launcher is, for all intents and purposes, nonexistent. However, I was able to install Nova Launcher and can go to a home screen just fine. THIS IS NOT SATISFACTORY. I want to get back to STOCK Launcher, but it apparently does not exist anymore. I've managed to copy over my backup of Launcher2.apk, but it still refuses to acknowledge its existence. Can I get an update.zip that'll reinstall the default launcher from someone? I can boot into recovery via ROM Manager now I suppose!
+++EDIT!+++
+++~~~I have discovered that my problem is not the device being stuck in boot up, but that the boot animation will not cease--as +in the device is actually powered on, just displaying the boot animation like a screen saver. I cannot boot into recovery as I get +the Google splash screen and it never goes anywhere, my bootloader is freezing every time I plug it into my computer, and the +drivers will not install. My computer cannot detect fastboot and I can't connect to the Nexus via adb either. I CAN access internal +storage but that's about the extent of what I can do.+++~~~
Long version:
I decided I wanted to change the App Drawer icon from stock to a Nexus X that inverted its colours when pressed. I found the icon, converted it to png, inverted the colours and everything was going fine.
After a while I finally managed to find the right icons to replace in the system apk file "launcher2.apk". "ic_allapps.png" and "ic_allapps_pressed.png" or something very similar. I simply replaced them with my two icons, installed my modified launcher2.apk, and that was it.
Immediately, my home wouldn't open at all, no matter how many times I pressed the home button. It just would not exit the app I had up. So I started backing and ended up in an infinite back loop. I powered off the device, waited a minute, and powered it back on.
It came to the usual "Google" screen with the unlocked symbol at the bottom, no problems. However, then it started playing the boot animation. The boot animation never stopped. It looped infinitely. I tried resetting the tablet a few times for the same result. It was after 3 am and I had to get up for work in 4 and a half hours. I thought that maybe it was gonna take a while. So I flipped the Nexus over while it was "booting up" and went to sleep.
When I woke up and checked the tablet at 7:30, it was STILL booting up. Obviously I had screwed something up.
Now, stupid me, I had never flashed CWM recovery on my Nexus 7 (haven't had it that long), so all I'm stuck with is STOCK Recovery. I'm pretty sure I can rescue the Nexus by factory resetting it or something similar, but I'd rather try to save it first. All I modified was a LAUNCHER application, so I'm pretty sure the current state of the Nexus itself shouldn't be too far gone. Is there any way to save the Nexus WITHOUT a data wipe? And if the data wipe DOESN'T fix my problem, is it possible to somehow flash a stock ROM through stock Android Recovery?
***TL;DR***
I modified launcher2.apk and replaced "ic_allapps.png" and "ic_allapps_pressed.png" with two customized .png files (which I renamed to their appropriate file names). Now my Nexus is stuck on the boot animation indefinitely. I would like to save all of my data, as a data wipe would be inconvenient, but if I must do one I shall. I am on a stock ROM and a stock Recovery. If a data wipe/factory reset will not save my device, is it possible to flash a stock ROM through regular Android Recovery?
===Related but irrelevant to the problem===
Is it completely impossible to change the stock App Drawer icon to something different? I'd rather not have to get a different launcher app just to create a Nexus theme! I did a little more research and found that I should've modified the "all_apps_button_icon.xml" file as well, but I have NO idea how to do that.
Many thanks,
VonDerThWood.
As long as you can get into the bootloader you can flash back to stock using fastboot and the image from here
NeoMagus said:
As long as you can get into the bootloader you can flash back to stock using fastboot and the image from here
Click to expand...
Click to collapse
no need to flash back to stock, silly advice. just flash a custom recovery and flash a stock rooted rom. flashing a stock rooted rom will replace what you messed up on. dont wipe.
simms22 said:
no need to flash back to stock, silly advice. just flash a custom recovery and flash a stock rooted rom. flashing a stock rooted rom will replace what you messed up on. dont wipe.
Click to expand...
Click to collapse
How can I reflash the ROM on stock Android recovery? Googling that returns CWM results.
He is suggesting you flash custom recovery with fastboot and just flash over top of what you did thru the custom recovery which you can do as well, what I suggested just returns it to factory state I don't see whats so silly about it I understand he wants to keep his data but worse comes to worse as long as you can get into the bootloader you're fine
NeoMagus said:
He is suggesting you flash custom recovery with fastboot and just flash over top of what you did thru the custom recovery which you can do as well, what I suggested just returns it to factory state I don't see whats so silly about it I understand he wants to keep his data but worse comes to worse as long as you can get into the bootloader you're fine
Click to expand...
Click to collapse
youre right about if worse comes to worse. reflashing the factory image should be the very last thing to do, when all other options have been tried. im just trying to save his data
If you don't have fastboot set up you might want to give this post a look he describes how to get it set up.
simms22 said:
youre right about if worse comes to worse. reflashing the factory image should be the very last thing to do, when all other options have been tried. im just trying to save his data
Click to expand...
Click to collapse
I don't use custom recoveries and backup my data regularly with Titanium, so restoring after a reflash is really just an afterthought here, to each there own
The problem is not as it seems.
When I plug the Nexus into the computer when in Fastboot mode, it freezes the Recovery. I cannot select anything OR move the selection to anything else. The hell?
I noticed that when the Nexus attempts to boot up, the boot animation gets brighter.
__
Wait, when it attempted to boot up when plugged into my PC, AutoPlay recognized the device as Nexus 7. There is nothing on my screen but the boot animation, however I can browse internal storage.
I cannot, however, connect to it via adb apparently. ADB devices returns nothing.
____
Okay, the problem is NOWHERE near what I thought it was. The boot animation is replacing the lock screen/home screen/everything. I just received an email (I could tell because of the notification noise the tablet made). It is booting up, just not displaying anything passed the boot animation and ADB cannot detect the device. I KNOW it has USB Debugging mode activated and all, but what can I do now?
===
I usually make backups and nandroids but I've barely owned this device. ;P
Does fastboot detect the device?
janedoesmith said:
Does fastboot detect the device?
Click to expand...
Click to collapse
Fastboot doesn't detect the device while booted up like this, and when I plugged it into the computer when in recovery/fastboot mode it not only froze the device, but fastboot wouldn't detect it.
I can get into the internal storage (just not the root of the device unfortunately). So what can one do when he cannot connect to the device via fastboot or adb, nor flash a custom recovery image because he can't access fastboot?
This is getting more complicated the more I dig into it. What the hell did I do?
Are you on the correct screen? I see how you are lumping Fastboot/recovery together, Fastboot is used on the screen with the android with his chest open after holding down the power/vol buttons from complete off , has version info/ unlock status in the lower left.. not sure if you can do that in the recovery but that is where I put the commands in
the freezing in the bootloader is a n7 bug. try a few times. try going into the bootloader then plugging in usb, and try plugging in via usb then going into the bootloader. try a few times, eventually you will get it.
VonDerThWood said:
Fastboot doesn't detect the device while booted up like this, and when I plugged it into the computer when in recovery/fastboot mode it not only froze the device, but fastboot wouldn't detect it.
I can get into the internal storage (just not the root of the device unfortunately). So what can one do when he cannot connect to the device via fastboot or adb, nor flash a custom recovery image because he can't access fastboot?
This is getting more complicated the more I dig into it. What the hell did I do?
Click to expand...
Click to collapse
You have to be in bootloader for fastboot to detect your device. Once in bootloader, open a command prompt where your fastboot.exe is stored and type "fastboot devices" without the quotes. If it detects it, it should list your N7's serial number.
NeoMagus said:
Are you on the correct screen? I see how you are lumping Fastboot/recovery together, Fastboot is used on the screen with the android with his chest open after holding down the power/vol buttons from complete off , has version info/ unlock status in the lower left.. not sure if you can do that in the recovery but that is where I put the commands in
Click to expand...
Click to collapse
Fastboot has the "Recovery mode" option but it just gives me the Google logo with the unlocked icon at the bottom indefinitely...which means I cannot access recovery either? Why didn't I notice this before? >_<
simms22 said:
the freezing in the bootloader is a n7 bug. try a few times. try going into the bootloader then plugging in usb, and try plugging in via usb then going into the bootloader. try a few times, eventually you will get it.
Click to expand...
Click to collapse
Tried 10 times by booting into bootloader first, then 10 times by plugging it in and booting into it while it's plugged in. This is a very...odd bug.
janedoesmith said:
You have to be in bootloader for fastboot to detect your device. Once in bootloader, open a command prompt where your fastboot.exe is stored and type "fastboot devices" without the quotes. If it detects it, it should list your N7's serial number.
Click to expand...
Click to collapse
Nothing at all. Won't detect it or anything.
it is an odd bug. i think every n7 owner who likes to flash roms/kernels has had to deal with it at least once.
VonDerThWood said:
janedoesmith said:
You have to be in bootloader for fastboot to detect your device. Once in bootloader, open a command prompt where your fastboot.exe is stored and type "fastboot devices" without the quotes. If it detects it, it should list your N7's serial number.
Click to expand...
Click to collapse
Nothing at all. Won't detect it or anything.
Click to expand...
Click to collapse
What about in device manager? Does it at least show an unknown device or something similar? Try reinstalling the drivers.
janedoesmith said:
What about in device manager? Does it at least show an unknown device or something similar? Try reinstalling the drivers.
Click to expand...
Click to collapse
Now that I think about it, it DID say something about failing to install an unknown driver the first time I plugged it in. Let me uninstall/reinstall the drivers.
____
After reinstalling the drivers (and removing both of the Nexus7 specific ones), I also removed one named "Android", which, coincidentally, is the driver that the tablet is trying to install upon being plugged in. I have tried to reinstall it several times, but it fails each time, AND I just reinstalled the real Nexus 7 drivers.
___
The Nexus drivers won't reinstall now. I even went to Asus's website and downloaded them, but I have no clue how to install it in this format.
Is there a way to open/install an app through JUST the Internal Storage? If so, I have the stock launcher2.apk file right here...I just need to reinstall it! Damn, how can I get to the Root folder without ADB?
Whoa! Stroke of GENIUS!
I have Cerberus installed on my tablet. Since I know the tablet is booting up, just not displaying passed the boot animation, I decided to give it a try.
I started an alarm, which forced the tablet to the lock screen...I can open apps through the Play Store (as I got an update notification) and the like, but I can NOT get to the home screen.
I opened Total Commander via Play Store, but I can't do anything with it. The app that I used was NinjaMorph and I'm pretty sure the only way I can correct my mistake is through that app. What do I do?
Found NinjaMorph in the Play Store, it couldn't fix my problem. Oh hell.
I tried to copy/replace the launcher2.apk file I screwed up with a backed up one but TotalCommander couldn't do it. It was even granted SuperUser permissions. Attempting with Root Explorer.
Success! I have copied the original Launcher2.apk back into the /system/app folder. HOWEVER, I can NOT install it.
Managed to connect via adb! Things are looking up! Now, how to install this stuff...?
When trying to reinstall the launcher2.apk, it gives me the following error:
INSTALL_FAILED_UID_CHANGED
So I tried uninstalling it to no avail. Troubling.
SO! Now what? I am into the device, and any app I have downloaded through the Play Store is available to me, but I cannot go to the home screen. I need to reinstall the original Launcher2.apk!
Retrying NinjaMorph. It supposedly installed my Launcher2.apk. However, I still cannot return to the Home screen. WTF.
I'm going to install a different Launcher. Hope that works!
Success. I can now return home to Nova Launcher. HOWEVER...
This is not satisfactory. I want my STOCK launcher. Anybody know how I can fix this? The stock launcher is acting like it doesn't exist anymore. Is there a way to just wipe THAT data and keep all the other data on my device?? (Though I admit, I do like how I already was able to change my App drawer icon to my Nexus X <3.)
Edit: I see you resolved it. Good job! I'll just leave this here... :good:
Is there a way to open/install an app through JUST the Internal Storage? If so, I have the stock launcher2.apk file right here...I just need to reinstall it! Damn, how can I get to the Root folder without ADB?
Click to expand...
Click to collapse
You sound to be in Windows driver hell. If you have access to a Linux machine or someone who does, this entire driver mess can be avoided.
You can't install an apk via the MTP or PTP usb interface. You have a few options to fix this, but all depends on getting your drivers sorted.
Otherwise, grab the latest Windows USB drivers from Google - https://dl-ssl.google.com/android/repository/usb_driver_r07-windows.zip and follow these instructions to install them - http://developer.android.com/tools/extras/oem-usb.html
With the drivers installed and the nexus 7 plugged in, try adb devices again. Assuming you can resolve the driver issue, run
Code:
adb install path\to\launcher2.apk
comminus said:
You sound to be in Windows driver hell. If you have access to a Linux machine or someone who does, this entire driver mess can be avoided.
You can't install an apk via the MTP or PTP usb interface. You have a few options to fix this, but all depends on getting your drivers sorted.
Otherwise, grab the latest Windows USB drivers from Google - https://dl-ssl.google.com/android/repository/usb_driver_r07-windows.zip and follow these instructions to install them - http://developer.android.com/tools/extras/oem-usb.html
With the drivers installed and the nexus 7 plugged in, try adb devices again. Assuming you can resolve the driver issue, run
Code:
adb install path\to\launcher2.apk
Click to expand...
Click to collapse
I managed to get ADB working (via adbWireless) after the above post I made, however I cannot get launcher2.apk to install. This time I got the "INSTALL_FAILED_DEXOPT" error instead of the "INSTALL_FAILED_UID_CHANGED" one.
Hi
Tried to flash a new kernel and all seemed ok (flashed phones and nexus 7 few times now) when I came out of flashing I hit a bootloop, I though nothing of it and tried to restart....same issue, so next I tried to go into cw recovery, no joy, it will not show again.
I can power/vol keys to android fastboot screen with start power restart boot and so on but if I choose recovery nothing happens, I am stuck with either a bootloop or stuck on android fastboot screen and not able to move from either.
I have tried the toolkit and most other things but the problem is it cannot see my nexus 7, even after installing drivers and so on the toolkit (top right) does not list my nexus as found, because of this I cannot reflash any stock firmware/recover/reflash cwr.
Not sure how I can get around this if my pc cannot see the nexus 7.
Thanks for any help
voodoochild2008 said:
Hi
Tried to flash a new kernel and all seemed ok (flashed phones and nexus 7 few times now) when I came out of flashing I hit a bootloop, I though nothing of it and tried to restart....same issue, so next I tried to go into cw recovery, no joy, it will not show again.
I can power/vol keys to android fastboot screen with start power restart boot and so on but if I choose recovery nothing happens, I am stuck with either a bootloop or stuck on android fastboot screen and not able to move from either.
I have tried the toolkit and most other things but the problem is it cannot see my nexus 7, even after installing drivers and so on the toolkit (top right) does not list my nexus as found, because of this I cannot reflash any stock firmware/recover/reflash cwr.
Not sure how I can get around this if my pc cannot see the nexus 7.
Thanks for any help
Click to expand...
Click to collapse
try to flash recovery again via fastboot...or doesnt pc recognize divice at all?
S.R
shivasrage said:
try to flash recovery again via fastboot...
S.R
Click to expand...
Click to collapse
Hi
I cannot flash anything. On the fastboot screen I can scroll up and down powr off/start/recovery....if I choose any (apart from power off) nothing happens.
When I hook it up to my pc it cannot see it, nexus 7 toolkit also cannot see it, it does not list it as found so I cannot flash anything on to it, if I try it just says waiting for device, tried other things and same thing either waiting for device or asks if fastboot installed.
voodoochild2008 said:
Hi
I cannot flash anything. On the fastboot screen I can scroll up and down powr off/start/recovery....if I choose any (apart from power off) nothing happens.
When I hook it up to my pc it cannot see it, nexus 7 toolkit also cannot see it, it does not list it as found so I cannot flash anything on to it, if I try it just says waiting for device, tried other things and same thing either waiting for device or asks if fastboot installed.
Click to expand...
Click to collapse
f****
have you tried flashing factory image from google site.with flash all-sh?
shivasrage said:
f****
have you tried flashing factory image from google site.with flash all-sh?
Click to expand...
Click to collapse
I have a image ready but not able to flash....but what is flash all-sh? trying to search for it, is it a tool to force flash?
voodoochild2008 said:
I have a image ready but not able to flash....but what is flash all-sh? trying to search for it, is it a tool to force flash?
Click to expand...
Click to collapse
no its included in the factory image to flash all i one so it looks like for the nexus 4:
flash-all .....its a windows batch image with all included.... try this
S:R.
shivasrage said:
no its included in the factory image to flash all i one so it looks like for the nexus 4:
flash-all .....its a windows batch image with all included.... try this
S:R.
Click to expand...
Click to collapse
Thanks....but still get waiting for device, thats the problem, nothing seems to see it so I cannot flash anything to it.
You are already at the bootloader screen. Use your computer to fastboot flash a new kernel. Being able to get into recovery has nothing to do with it. You screwed it up flashing a kernel. Its likely thats all you need to fix it. Flash a new one with fastboot.
You are already at the bootloader screen. Use your computer to fastboot flash a new kernel. Being able to get into recovery has nothing to do with it. You screwed it up flashing a kernel. Its likely thats all you need to fix it. Flash a new one with fastboot.
i thought the same as you but fastboot isn recognizig N7 anymore....always wating for device....
Hemidroids said:
You are already at the bootloader screen. Use your computer to fastboot flash a new kernel. Being able to get into recovery has nothing to do with it. You screwed it up flashing a kernel. Its likely thats all you need to fix it. Flash a new one with fastboot.
Click to expand...
Click to collapse
Downloaded the fastboot exe but unsure what it needs to work as when I click on it a run box opens for like half a second and then closes, dont get a chance to read what it says, think I will have to read up on it.
[/COLOR]
voodoochild2008 said:
Downloaded the fastboot exe but unsure what it needs to work as when I click on it a run box opens for like half a second and then closes, dont get a chance to read what it says, think I will have to read up on it.
Click to expand...
Click to collapse
read this... i hope you can follwow that easily like me...
greets S.R.
http://dottech.org/21534/how-to-ins...ows-computer-for-use-with-your-android-phone/
voodoochild2008 said:
Downloaded the fastboot exe but unsure what it needs to work as when I click on it a run box opens for like half a second and then closes, dont get a chance to read what it says, think I will have to read up on it.
Click to expand...
Click to collapse
EXE? doh.......Windows.......sorry cant help.
shivasrage said:
[/COLOR]
read this... i hope you can follwow that easily like me...
greets S.R.
http://dottech.org/21534/how-to-ins...ows-computer-for-use-with-your-android-phone/
Click to expand...
Click to collapse
Tried some of that already but will try again tomorrow.
Thanks for help with this and will post tomorrow if I can sort it. cheers
I hope this instructions can help you a little bit...but if it fails don´t be angry its all I can think of ...at this time ....merry christmas
S.R.
http://forum.xda-developers.com/showthread.php?p=31931117:D
Sent from my Nexus 7 using xda premium
Well after using bits of jrom flasher and nexus toolkit I got it working again, main issue was making the tablet seen, abd and fastboot would not show device.
All up and running again THANKS TO ALL WHO HELPED
voodoochild2008 said:
Well after using bits of jrom flasher and nexus toolkit I got it working again, main issue was making the tablet seen, abd and fastboot would not show device.
All up and running again THANKS TO ALL WHO HELPED
Click to expand...
Click to collapse
How did you get it to work? I have problem getting my device to be recognized. Stuck on boot loop too..
Hey man, how did you get your computer to recognize your device? Would be great to finally fix mine as this is the same exact problem -- computer doesn't recognize it even though in fastboot.
Quacker245 said:
Hey man, how did you get your computer to recognize your device? Would be great to finally fix mine as this is the same exact problem -- computer doesn't recognize it even though in fastboot.
Click to expand...
Click to collapse
I don't understand exactly what you are trying to do, sorry: you said the pc does not see the nexus, "even thought in fastboot".. If you say even thought, it seems to me that you are able to access Android itself or maybe recovery? In that case I can't see the issue.. Sorry my fault, non english mother tongue
But, if have the device soft bricked and you are able to enter ONLY the bootloader (that is what we call often fastboot), then you should start to remove the not working fastboot drivers installed into your PC: launch the nexus in fastboot mode, go to Device Manager into your PC and search for a driver with an yellow exclamation point. This issue is very common so I hope that you have it, too.. So, uninstall that driver, then unlink the nexus from your PC; after a few seconds attach it to another USB port and see if Windows install a driver (it should). If this new driver doesn't work, too, or if Windows does no install any, try this one: http://forum.xda-developers.com/showthread.php?t=1426502
Hope it helps, let us know, see you!
EDIT: also, if you still have no luck, you should find a Linux or Mac PC/laptop and download the adb/fastboot binary files for that OS; this will definitively solve your driver issue ( @#ò#@!"@# Winzozz )
brainvision said:
I don't understand exactly what you are trying to do, sorry: you said the pc does not see the nexus, "even thought in fastboot".. If you say even thought, it seems to me that you are able to access Android itself or maybe recovery? In that case I can't see the issue.. Sorry my fault, non english mother tongue
But, if have the device soft bricked and you are able to enter ONLY the bootloader (that is what we call often fastboot), then you should start to remove the not working fastboot drivers installed into your PC: launch the nexus in fastboot mode, go to Device Manager into your PC and search for a driver with an yellow exclamation point. This issue is very common so I hope that you have it, too.. So, uninstall that driver, then unlink the nexus from your PC; after a few seconds attach it to another USB port and see if Windows install a driver (it should). If this new driver doesn't work, too, or if Windows does no install any, try this one: http://forum.xda-developers.com/showthread.php?t=1426502
Hope it helps, let us know, see you!
EDIT: also, if you still have no luck, you should find a Linux or Mac PC/laptop and download the adb/fastboot binary files for that OS; this will definitively solve your driver issue ( @#ò#@!"@# Winzozz )
Click to expand...
Click to collapse
Hi sorry for not being clear. Basically I am only allowed to access the bootloader and my device is soft-bricked. I'm pretty sure I tried uninstalling and reinstalling the drivers about a year ago when I originally did it, but I'll try again and let you know. Thanks!
Well to make it simple, the newest twrp is very buggy and to make a long story short i installed a new rom, and while it was restoring my data, my n7 shut off. its done this before so naturaly i held the power+volume down buttons too boot into the bootloader but it wont turn on. Any help/ suggestions?
Put it on the power supply and let it there for some time ... Then start again.
Sent from my Nexus 7 using xda app-developers app
AndDiSa said:
Put it on the power supply and let it there for some time ... Then start again.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Thank you ill try that. it was at 33% battery when this happened though
Um... It probably didn't shutoff. There's a screen timeout.
Sent from my Nexus 7 using Tapatalk HD
korockinout13 said:
Um... It probably didn't shutoff. There's a screen timeout.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
i know about the screen time out, i tapped the screen for it to rewake and it didnt work, then i tried pressing the sleep button once for it to unlock and that didnt work. so it indeed shutoff
frap129 said:
Well to make it simple, the newest twrp is very buggy and to make a long story short i installed a new rom, and while it was restoring my data, my n7 shut off. its done this before so naturaly i held the power+volume down buttons too boot into the bootloader but it wont turn on. Any help/ suggestions?
Click to expand...
Click to collapse
I'm confused. It's a little off-topic, but what does "restoring my data" have to do with TWRP in the context of flashing a new ROM?
Anyway, I would proceed with a dead battery or loose battery connector hypothesis first. It's not obvious why writes to /boot, /cache, /data, or /system would affect the bootloader.
Anything is possible at a low enough probability I suppose, but you should start troubleshooting operations with the high-probability scenarios first.
For instance - with the power off, will the "charging screen" display when you plug the tab in? How about APX** mode? (Plug in to PC and start with Power+Vol-up). If you didn't see either of those, it's likely a power supply or hardware problem.
good luck
** make sure you exit APX mode by holding down the power button for at least 20 seconds. I'm not sure if it shuts itself down after an inactivity timeout - you don't want to be draining power while trying to charge the tab.
bftb0 said:
I'm confused. It's a little off-topic, but what does "restoring my data" have to do with TWRP in the context of flashing a new ROM?
Click to expand...
Click to collapse
Well, you backup your data, Wipe data and cache, flash the rom, gapps, ect. then restore data, the charging screen wont dispaly, apx mode doesnt work, but the whole story: went to flash a newer version of my rom, install faills due to error in updater binary so i go to reboot and it says "No OS Installed! Are you sure you want to reboot?" i press dont reboot, go to install the older version of the rom, go to restore data and then it shut off.
frap129 said:
Well, you backup your data, Wipe data and cache, flash the rom, gapps, ect. then restore data, the charging screen wont dispaly, apx mode doesnt work, but the whole story: went to flash a newer version of my rom, install faills due to error in updater binary so i go to reboot and it says "No OS Installed! Are you sure you want to reboot?" i press dont reboot, go to install the older version of the rom, go to restore data and then it shut off.
Click to expand...
Click to collapse
The lack of APX mode or the charger screen suggests a battery problem or a hardware failure, not a software problem. APX mode will be present even if the tablet has absolutely nothing in flash memory.
Having nothing in /system (no OS or even no filesystem) will not affect bootability of either the bootloader or the recovery.
I don't know why you would wipe data only to restore it after flashing a ROM. Usually wiping cache & dalvik-cache is sufficient for "dirty-flashing" a ROM upgrade as it is very unusual for ROM installs to diddle with the /data partition. (But making full backups is always a good idea.)
I would check (carefully) to see if the battery connector came loose before you decide to throw the tablet away.
good luck
bftb0 said:
The lack of APX mode or the charger screen suggests a battery problem or a hardware failure, not a software problem. APX mode will be present even if the tablet has absolutely nothing in flash memory.
Having nothing in /system (no OS or even no filesystem) will not affect bootability of either the bootloader or the recovery.
I don't know why you would wipe data only to restore it after flashing a ROM. Usually wiping cache & dalvik-cache is sufficient for "dirty-flashing" a ROM upgrade as it is very unusual for ROM installs to diddle with the /data partition. (But making full backups is always a good idea.)
I would check (carefully) to see if the battery connector came loose before you decide to throw the tablet away.
good luck
Click to expand...
Click to collapse
Battery connector didnt come loose, still dosent work. guess it might just be broken
EDIT: I plugged it in to my pc and the google screen came up for about 20 sec then it shut back off. havent been able to get anything since
frap129 said:
Battery connector didnt come loose, still dosent work. guess it might just be broken
EDIT: I plugged it in to my pc and the google screen came up for about 20 sec then it shut back off. havent been able to get anything since
Click to expand...
Click to collapse
Is it possible to enter Odin on the n7?
Sent from my Galaxy Nexus using xda premium
Soldier 2.0 said:
Is it possible to enter Odin on the n7?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Odin is Samsung only
Sent from my Galaxy Nexus
You can hold the power button for 10 seconds and wait till you see the Google logo. Then release and hold it 10 seconds again, when the screen turns off hold the volume down button and wait for it till it automatically boots again. You'll enter bootloader mode. Download wugfresh' nexus root toolkit and install it. When the program is loaded there is a flash stock option on the right side of the program. Select the soft brick / boot loop option under the flash button. While in boot loader mode connect your nexus and press the flash button.
This is all I know!
Sent from my Nexus 7 using xda premium
NEXUS 7 Bricked - NO OS - tried everything but...
It's a catch 22 here. I can't get drivers installed and the nexus recognized and so when it comes to flashing/restoring via cmd prompt the PC won't recognize my device and so I can go only get so far. I have no OS installed as I wiped all like an idiot in twrp so how the hell can I get drivers installed on a nexus that has no OS installed? I can't enable usb debugging etc because, well, I have no way of getting the nexus to work so can't get into the settings to do so.
I have tried everything in twrp but there is nothing to restore - i can't get roms pushed onto it - God I give up. All I need is the PC to recognize my device and I know I can crack this. What do I have to do? Please help this idiot.
CarlKirshner1989 said:
It's a catch 22 here. I can't get drivers installed and the nexus recognized and so when it comes to flashing/restoring via cmd prompt the PC won't recognize my device and so I can go only get so far. I have no OS installed as I wiped all like an idiot in twrp so how the hell can I get drivers installed on a nexus that has no OS installed? I can't enable usb debugging etc because, well, I have no way of getting the nexus to work so can't get into the settings to do so.
I have tried everything in twrp but there is nothing to restore - i can't get roms pushed onto it - God I give up. All I need is the PC to recognize my device and I know I can crack this. What do I have to do? Please help this idiot.
Click to expand...
Click to collapse
USB debugging doesn't mean **** when you are in a custom recovery. It has adb already. Your problem is your computer. Fix your computer by following one of the bajillion threads and posts about the nexus 7 drivers issues.
Installing drivers does not need android to be booted.
Your best bet is to put it in fast boot mode and follow Google's own instructions to flash it back to stock.
Sent from my Galaxy Nexus
CarlKirshner1989 said:
It's a catch 22 here. I can't get drivers installed and the nexus recognized and so when it comes to flashing/restoring via cmd prompt the PC won't recognize my device and so I can go only get so far. I have no OS installed as I wiped all like an idiot in twrp so how the hell can I get drivers installed on a nexus that has no OS installed? I can't enable usb debugging etc because, well, I have no way of getting the nexus to work so can't get into the settings to do so.
I have tried everything in twrp but there is nothing to restore - i can't get roms pushed onto it - God I give up. All I need is the PC to recognize my device and I know I can crack this. What do I have to do? Please help this idiot.
Click to expand...
Click to collapse
I must admit I'm a little 'hazy' myself when it comes to ADB related issues... I've never had much cause to use ADB. (Think I've used 'adb pull' on a couple of occasions). And I've never been in the invidious position of not having a bootable Android OS on my Nexus 7 either - which does seems to happen a quite lot with TWRP users, less so with CWM users.
Anyway... just had a tinker... and you could try the following workaround... this seemed to work to for me.
----------------------
Locate the folder on your PC where you keep your FASTBOOT and ADB .exe files...
Copy whatever ROM .zip you want into this folder.
The following example uses SmoothROM-v5.0.zip ... There is nothing to stop you from renaming this to something shorter, for ease of typing later... so, in my case, just smooth.zip.
Boot your Nexus 7 into the BOOTLOADER (Vol down [hold] + Power button), and then into RECOVERY (TWRP) and hook it up your PC.
Open a command prompt window on the aforementioned folder... and type...
Code:
adb devices
...which should yield something like the following...
Code:
List of devices attached
012345679ABCDEF recovery
(If you don't see a serial number... then you definitely have a driver problem...)
Otherwise, it's just...
Code:
adb push smooth.zip /sdcard
Or whatever ROM you wish to 'push' to the emulated SD card.
This will likely take a fair few minutes for a 300Mb+ size file (typically the size of your average ROM)... on my Windows XP box it took 4 minutes (1328 KB/s, 32565894 bytes in 239.486s) to copy over. And there are no 'progress gauges' of any kind, either... So season your patience a liitle. You can always pull up another command prompt window and type adb devices again to ensure you still have an ongoing ADB connection.
Once copied over, and still in TWRP, you can just flash it.
Good luck.
Rgrds,
Ged.
Still nothing on mine. im just about to give up and wait to see if google releases the N7 second generation at the i/o
If You familiar with Linux, You can try to understand the logic of
changing the modes.
You need to run udevadm monitor in one terminal. Then press some
combinations of key/s and look for changes with usb-devices.
The better, if You run wireshark and sniff USB interface with your device.
Put attachment here, with a comments what was pressed.
since it seems to be a hardware problem, not software, im just going to send it to asus and see what they can do.
I apologize if this question has been answered already, but I just spent 15 minutes using the search button and could not find a response.
I just installed Matr1x v10.5 (http://forum.xda-developers.com/showthread.php?t=2007231) onto my Nexus 4 but it had JB 4.2. Based on the version notes of the thread, I assumed that it was backwards compatible with my phone and therefore installed the new version on my Nexus 4. Now every time I turn on my Nexus 4 the screen is blank. What can I do to fix this issue? Will it require a reset so that all my data is lost? Thanks.
What do you mean with '... The screen is blank'?
Can you get past the google bootanimation?
Sent from my Nexus 4 using xda app-developers app
failly said:
What do you mean with '... The screen is blank'?
Can you get past the google bootanimation?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Nope, basically once I turn it on I see the "Google" text, and then the screen goes blank as in it's black. Basically the back light is on and you can see that it's on but the background is still black.
pooq said:
Nope, basically once I turn it on I see the "Google" text, and then the screen goes blank as in it's black. Basically the back light is on and you can see that it's on but the background is still black.
Click to expand...
Click to collapse
Go into recovery and flash the stock kernel. If that doesnt work you need to do a full wipe and reflash the rom.
failly said:
What do you mean with '... The screen is blank'?
Can you get past the google bootanimation?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Chromium_ said:
Go into recovery and flash the stock kernel. If that doesnt work you need to do a full wipe and reflash the rom.
Click to expand...
Click to collapse
Theoretically, if I flash v10.0 (which accommodates JB 4.2) it should fix the issue right?
I'm at a dilemma because I do not know if there are any other ways to insert the kernel into my phone as there is no microSD option on the Nexus 4. Does anyone know how I could potentially get the file into my phone?
pooq said:
Theoretically, if I flash v10.0 (which accommodates JB 4.2) it should fix the issue right?
I'm at a dilemma because I do not know if there are any other ways to insert the kernel into my phone as there is no microSD option on the Nexus 4. Does anyone know how I could potentially get the file into my phone?
Click to expand...
Click to collapse
Can you access recovery? If yes mount your storage and you can transfer the files.
Sent from my Nexus 4 using xda app-developers app
failly said:
Can you access recovery? If yes mount your storage and you can transfer the files.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I had already tried that, but once I connected my usb into my laptop I still couldn't transfer any files over.
In the end I reset my phone to factory settings, so the display still shows "Google". Just to confirm, the reason why this logo has been displayed on my phone for a while is because it is working to restore the factory setting (e.g. OS) correct?
pooq said:
I had already tried that, but once I connected my usb into my laptop I still couldn't transfer any files over.
In the end I reset my phone to factory settings, so the display still shows "Google". Just to confirm, the reason why this logo has been displayed on my phone for a while is because it is working to restore the factory setting (e.g. OS) correct?
Click to expand...
Click to collapse
I can't tell for sure since it never happend to me but I don't think if you choose to reset your phone to factory settings it will stay at the google logo.
If you choose to reset to facory settings I think you just will boot into recovery with that an android standing with something in his belly with a loading bar.
You can try this.
1.Boot into bootloader.
2A.Flash TWRP with the fastboot command and go to step 3.
2B.Flash stock N4 image with the fastboot command and profit!
3a.Try to mount storage and transfer another rom.
3b.Restore a backup.
Hopefully this works.
Sent from my Nexus 4 using xda app-developers app
failly said:
I can't tell for sure since it never happend to me but I don't think if you choose to reset your phone to factory settings it will stay at the google logo.
If you choose to reset to facory settings I think you just will boot into recovery with that an android standing with something in his belly with a loading bar.
You can try this.
1.Boot into bootloader.
2A.Flash TWRP with the fastboot command and go to step 3.
2B.Flash stock N4 image with the fastboot command and profit!
3a.Try to mount storage and transfer another rom.
3b.Restore a backup.
Hopefully this works.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I have tried the above instructions up to step 3 because it did not work for me.
It shows the only files in my internal storage(/sdcard) are a file that says (Up A Level) and TWRP. Also, whenever I want to reboot it prompts "No OS Installed! Are you sure you wish to reboot?" At this point I am only interested in a factory reset now so that I can reinstall the initial JB 4.0 that came with the Nexus 4 and then upgrade to JB 4.3. However, whenever I do factory reset via recovery mode, I am stuck with an empty phone with the files I mentioned above.
What can I do to fix the situation? Thanks.
pooq said:
I have tried the above instructions up to step 3 because it did not work for me.
It shows the only files in my internal storage(/sdcard) are a file that says (Up A Level) and TWRP. Also, whenever I want to reboot it prompts "No OS Installed! Are you sure you wish to reboot?" At this point I am only interested in a factory reset now so that I can reinstall the initial JB 4.0 that came with the Nexus 4 and then upgrade to JB 4.3. However, whenever I do factory reset via recovery mode, I am stuck with an empty phone with the files I mentioned above.
What can I do to fix the situation? Thanks.
Click to expand...
Click to collapse
I think the reason that a factory reset won't help since there is no OS on the phone so it cannot reset something that isn't there.
And with the steps I mentioned, can you get into bootloader or does it directly boot into recovery.
Another thing you can try(I don't think it will work but I never tried it so you never know)
Download this toolkit:
http://forum.xda-developers.com/showthread.php?t=2015469
There is an option to flash to stock completly, that will maybe do the trick.
Good luck!
Sent from my Nexus 4 using xda app-developers app
failly said:
I think the reason that a factory reset won't help since there is no OS on the phone so it cannot reset something that isn't there.
And with the steps I mentioned, can you get into bootloader or does it directly boot into recovery.
Another thing you can try(I don't think it will work but I never tried it so you never know)
Download this toolkit:
http://forum.xda-developers.com/showthread.php?t=2015469
There is an option to flash to stock completly, that will maybe do the trick.
Good luck!
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I can get into bootloader fine, it does not boot directly into recovery.
My Nexus 4 is already flashed with TWRP. I have installed the program from the link you provided, however, I have not used it to flash my phone again as one of the prerequisites to using the program is selecting which OS version I am using (at this point I am not using any) and want to prevent any further issues from occurring.
It seems like I can't really do anything with my phone unless I get a JB OS reinstalled, which is what I am currently struggling with. I am presently trying to find a way to copy the downloaded Nexus image files provided online into my internal storage so I can install them.
pooq said:
I can get into bootloader fine, it does not boot directly into recovery.
My Nexus 4 is already flashed with TWRP. I have installed the program from the link you provided, however, I have not used it to flash my phone again as one of the prerequisites to using the program is selecting which OS version I am using (at this point I am not using any) and want to prevent any further issues from occurring.
It seems like I can't really do anything with my phone unless I get a JB OS reinstalled, which is what I am currently struggling with.
Click to expand...
Click to collapse
Okay since you can get into bootloader thats great news!
Have you tried to manually download the nexus 4 image from google?
NOTE this are direct download links:
4.3:
https://dl.google.com/dl/android/aosp/occam-jwr66v-factory-08d2b697.tgz
4.2.2:
https://dl.google.com/dl/android/aosp/occam-jdq39-factory-345dc199.tgz
Here is an excellent guide:
http://www.androidpolice.com/2013/0...-to-android-4-3-jwr66v-and-root-it-right-now/
Scenario #2 on that guide suits you!
I think this will do the trick!
Sent from my Nexus 4 using xda app-developers app
You just have to do the following :
A) flash a recovery via fastboot (fastboot flash recovery recovery.zip)
B) now go ahead and boot from your recovery, and push the rom of your choice, in case you don't have one already inside your sdcard (adb push ROM.zip /sdcard/ROM.zip)
C) flash your recently copied rom of choice to your phone. (if necessary, wipe data, cache and dalvik cache)
failly said:
Okay since you can get into bootloader thats great news!
Have you tried to manually download the nexus 4 image from google?
NOTE this are direct download links:
4.3:
https://dl.google.com/dl/android/aosp/occam-jwr66v-factory-08d2b697.tgz
4.2.2:
https://dl.google.com/dl/android/aosp/occam-jdq39-factory-345dc199.tgz
Here is an excellent guide:
http://www.androidpolice.com/2013/0...-to-android-4-3-jwr66v-and-root-it-right-now/
Scenario #2 on that guide suits you!
I think this will do the trick!
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I just spent a couple of hours reading through the guides (and trying them out) which led me to several other guides. To be incredibly honest, I am completely confused as there is a plethora of new information thrown at me. I have to pose several questions before I continue:
1) When you say bootloader, are you referring to the fastboot bootloader screen that pops up after holding the volume down button and the power button? I just wanted to confirm this as I am starting to feel you are referring to something different after reading several guides.
2) Is the scenario 2 guide you posted basically a method to "sideload" the JB 4.3 into the storage of my Nexus 4 so I can install it via Recovery Mode?
I tried installing the drivers but I cannot seem to do it successfully as I do not even have a starting OS for my phone in the first place. I can not access a theoretical "Developer Mode" either from when I first rooted my phone.
So basically, I do not understand how I can get the direct downloads from Google (the JB 4.3 files) and get them into the internal storage of my Nexus 4 to install the OS.
Is there a simpler way to do this? If not, here is my current progress. At the moment I am stuck at this guide (http://forum.xda-developers.com/showpost.php?p=34552123&postcount=1) from the previous link you linked and am between C-D. I cannot get my laptop to recognize my device via fastboot devices in command prompt (D). To be honest, this is the second time I've seen this guide but could not get it working properly which is why I used the file provided at (http://forum.xda-developers.com/showthread.php?t=2015469) to root my Nexus 4.the OS[/B]. Is there a simpler way to do this? At the moment I am stuck at this guide (http://forum.xda-developers.com/showpost.php?p=34552123&postcount=1) from the previous link you linked and am between C-D. I cannot get my laptop to recognize my device via fastboot devices in command prompt (D). To be honest, this is the second time I've seen this guide but could not get it working properly which is why I used the file provided at (http://forum.xda-developers.com/showthread.php?t=2015469) to root my Nexus 4.
Yes, the bootloader is the one where you press vol down and the power button together, that's the place where you select to go to the recovery, use fastboot.
First thing you got to do is turn on your phone on the bootloader as mentioned above. Then, assuming you downloaded this: [NEXUS 4 TOOLKIT V2.0.0] from here http://forum.xda-developers.com/showthread.php?t=1995688, open up command prompt and go to this address with "cd C:\Google_Nexus_4_ToolKit" or where you decided to install your toolkit. On windows explorer, go there and rename fastboot-toolkit or whatever it is called to fastboot to make things simpler.
Type in cmd: fastboot devices to check if it recognizes your phone.
If it doesn't; then install these drivers (you should have your device already connected via USB to your computer): https://www.dropbox.com/s/a808emeelvxkwyc/usb_driver.rar
Go to Control Panel\Hardware and Sound > Device Manager. Your phone should appear with an exclamation mark somewhere, right click it and click on update driver:
-Click on browse my computer software
-Let me pick from a list of device drivers on my computer
-Have disk
-Browse for where you downloaded the drivers I linked you to then click ok.
-You should find within the next page something that says Android Bootloader Interface, double click it and finish the installation.
After that's done, then type in fastboot devices on cmd again, it should show up now.
Then, go to here and download TWRP 2.6.0.0 http://techerrata.com/file/twrp2/mako/openrecovery-twrp-2.6.0.0-mako.img , that will be your recovery. After you've downloaded move it to C:\Google_Nexus_4_ToolKit to make matters easier.
NOTE: IF YOUR BOOTLOADER IS LOCKED YOU WILL HAVE TO UNLOCK IT , this can be done by typing fastboot oem unlock on command prompt
Now, simply type in this command: fastboot flash recovery openrecovery-twrp-2.6.0.0-mako.img you will now have a recovery on your device.
With the volume keys, choose to boot from the recovery. TWRP will load, while its loading, rename adb-toolkit to adb to make things easier. When its done loading, type in adb devices to see if it recognizes your phone, if it doesn't use your drivers again but this time instead of choosing Android Bootloader Interface, pick the one that says ADB.
When that's done, and it recognizes your device with the adb devices command you can now proceed to "push" or "copy/move a ROM you've downloaded in your computer towards your phone".
Of course you have to download a ROM, like Paranoid Android for example: http://goo.im/devs/paranoidandroid/roms/mako/pa_mako-3.69-20130722.zip , along with its GApps: http://goo.im/devs/paranoidandroid/roms/gapps/pa_gapps-full-4.2-20130719-signed.zip
You might have to even update your radio and bootloader in the future too, but let's leave it at that for now.
After you are done downloading the ROM of your choice, then type in these commands (assuming ADB works)
adb push pa_mako-3.69-20130722.zip /sdcard/
adb push pa_gapps-full-4.2-20130719-signed.zip /sdcard/
Having moved these two files inside your phone, now its time to flash them.
1) Go to Wipe on TWRP and simply swipe to factory reset
2) Go back and click on Install, look for pa_mako-3.69-20130722.zip and then add pa_gapps-full-4.2-20130719-signed.zip to the queue, swipe to install.
After that's done, simply reboot your phone and it should start booting up Paranoid Android and you're done. Might give you a few issues if you have an old radio and bootloader, but that can be fixed by flashing the new versions of these two in TWRP. Can be found here: https://www.copy.com/s/JniBu/4.3 files (mako) (these can be pushed via ADB like before, or you can simply download them on your phone when its working)
Hope this helps, don't think I can be more detailed.
wammie said:
Yes, the bootloader is the one where you press vol down and the power button together, that's the place where you select to go to the recovery, use fastboot.
First thing you got to do is turn on your phone on the bootloader as mentioned above. Then, assuming you downloaded this: [NEXUS 4 TOOLKIT V2.0.0] from here http://forum.xda-developers.com/showthread.php?t=1995688, open up command prompt and go to this address with "cd C:\Google_Nexus_4_ToolKit" or where you decided to install your toolkit. On windows explorer, go there and rename fastboot-toolkit or whatever it is called to fastboot to make things simpler.
Type in cmd: fastboot devices to check if it recognizes your phone.
If it doesn't; then install these drivers (you should have your device already connected via USB to your computer): https://www.dropbox.com/s/a808emeelvxkwyc/usb_driver.rar
Go to Control Panel\Hardware and Sound > Device Manager. Your phone should appear with an exclamation mark somewhere, right click it and click on update driver:
-Click on browse my computer software
-Let me pick from a list of device drivers on my computer
-Have disk
-Browse for where you downloaded the drivers I linked you to then click ok.
-You should find within the next page something that says Android Bootloader Interface, double click it and finish the installation.
After that's done, then type in fastboot devices on cmd again, it should show up now.
Then, go to here and download TWRP 2.6.0.0 http://techerrata.com/file/twrp2/mako/openrecovery-twrp-2.6.0.0-mako.img , that will be your recovery. After you've downloaded move it to C:\Google_Nexus_4_ToolKit to make matters easier.
NOTE: IF YOUR BOOTLOADER IS LOCKED YOU WILL HAVE TO UNLOCK IT , this can be done by typing fastboot oem unlock on command prompt
Now, simply type in this command: fastboot flash recovery openrecovery-twrp-2.6.0.0-mako.img you will now have a recovery on your device.
With the volume keys, choose to boot from the recovery. TWRP will load, while its loading, rename adb-toolkit to adb to make things easier. When its done loading, type in adb devices to see if it recognizes your phone, if it doesn't use your drivers again but this time instead of choosing Android Bootloader Interface, pick the one that says ADB.
When that's done, and it recognizes your device with the adb devices command you can now proceed to "push" or "copy/move a ROM you've downloaded in your computer towards your phone".
Of course you have to download a ROM, like Paranoid Android for example: http://goo.im/devs/paranoidandroid/roms/mako/pa_mako-3.69-20130722.zip , along with its GApps: http://goo.im/devs/paranoidandroid/roms/gapps/pa_gapps-full-4.2-20130719-signed.zip
You might have to even update your radio and bootloader in the future too, but let's leave it at that for now.
After you are done downloading the ROM of your choice, then type in these commands (assuming ADB works)
adb push pa_mako-3.69-20130722.zip /sdcard/
adb push pa_gapps-full-4.2-20130719-signed.zip /sdcard/
Having moved these two files inside your phone, now its time to flash them.
1) Go to Wipe on TWRP and simply swipe to factory reset
2) Go back and click on Install, look for pa_mako-3.69-20130722.zip and then add pa_gapps-full-4.2-20130719-signed.zip to the queue, swipe to install.
After that's done, simply reboot your phone and it should start booting up Paranoid Android and you're done. Might give you a few issues if you have an old radio and bootloader, but that can be fixed by flashing the new versions of these two in TWRP. Can be found here: https://www.copy.com/s/JniBu/4.3 files (mako) (these can be pushed via ADB like before, or you can simply download them on your phone when its working)
Hope this helps, don't think I can be more detailed.
Click to expand...
Click to collapse
The first thing I'd like to do before reporting my progress report is to thank you and failly for taking the time to help me out. You both have contributed tremendously in trying to help me out with this, so I would like to thank you both for that.
1) I had installed the sdk program and changed the adb path (following this guide http://www.redmondpie.com/how-to-set-up-android-adb-and-fastboot-on-windows-tutorial/)
Following wammie's guide:
2) Booted into bootloader
3) Downloaded and installed NEXUS 4 TOOLKIT V2.0.0 (had used it before but it didn't work for me so I relied on a different program to root my phone). Renamed fastboot-toolkit to fastboot
4) Typed fastboot devices in in cmd, does not recognize phone
5) Uninstalled current usb drivers and installed usb drivers provided. The driver I chose to install for was titled "Android". The other ! mark was "Base System Device" which was something I had never seen before until today when I had reinstalled usb drivers
6) Typed fastboot devices in cmd again and still nothing has changed
I am unable to continue any further as fastboot does not recognize my phone when I have it under bootloader. I had downloaded all the files that were recommended in your post. I think the reason why I cannot access fastboot devices is because there is literally no OS running in my phone. I could be wrong though.
I guess I'll take a break and call it a night since I've been trying to fix this problem the past 13 hours or so. Any additional feedback and support is appreciated!
Additional Notes: I have tried this both on my laptops (Windows 8) and on my desktop PC (Windows 7)
Luckly, if windows doesn't recognize your device while in fastboot it isn't because you don't have a OS installes but because not correctly set up drivers.
I posted a link some posta ago about a toolkit:
http://forum.xda-developers.com/showthread.php?t=2015469
When opening the program at the top there is a button called full driver installation, press it and follow the instructions.
Sent from my Nexus 4 using xda app-developers app
http://i.imgur.com/sOT7FGh.png
http://i.imgur.com/WNEKb0z.png
http://i.imgur.com/vUmTDcZ.png
http://imgur.com/da7NGwB
http://i.imgur.com/bjmhXZv.png
This is what you should do when you are updating the drivers, its imperative you get those drivers working. Otherwise, you won't get access to fastboot.
Oh I would recommend using a Windows 7 PC.
Windows 8 can also do the trick but you maybe need to disable driver signature enforcement, so you better go with windows 7 for now.
Sent from my Nexus 4 using xda app-developers app
Status Update:
I had spent a whole day reformatting my Windows 7 machine and am back at it. I have made a bit more progress than before.
1) After typing in fastboot flash recovery openrecovery-twrp-2.6.0.0-mako.img in command prompt, under the "List of devices attached" it is blank (i.e. there is no device attached). http://i.imgur.com/TnyBCKS.png
2) I have successfully installed the usb driver on my PC the first time when the only explanation mark was titled "Android", however the only Android option at the moment now is labelled "Android Bootloader Interface". No such thing as ADB (or any variations including Android ADB Interface) exists.
3) In TWRP Recovery mode, I see an exclamation mark titled mako but I believe that is irrelevant. I have tried installing the drivers to this just in case but failed. I then tried it again in Bootloader mode and mako is gone and Android Device pops up again with "Android Bootloader Interface"
4) I have tried restarting my PC and repeating the above steps.
Edit:
5) The only time I see an Android Composite ADB Interfaces is when I boot normally to the "Google" screen. However, I cannot move any of my ROMS over into my phone. When I typed "adb devices" it shows a bunch of characters with offline beside it. I do not have any options to reinstall any drivers for this.
From my understanding,I should be able to access the Android Composite ADB Interface while in recovery mode, which should let me transfer my ROMs over... but the issue is I cannot access Android Composite ADB Interface while in recovery mode.
Also, is there any reason why I shouldn't use the official JB 4.3 img as the ROM I want to install on my phone?
As the title says, I wanted to try CM installer, and I was on everything stock, not rooted. I downloaded PC, and android programs, followed the instructions, however at one point CM installer on my PC said it cannot communicate with my phone, and it was when it was trying to flash recovery. It said I should try different cable, or USB port, but no luck with either, and now it says my phone is not supported.
I tried to enter recovery, but I only get CM guy and it's stuck, even when I turn off the phone, it turns itself on automatically, and to fully turn it off I need to enter fastboot mode, and then turn off. I tried flashing full stock image (I know how to do that, and I have previous experience on this phone), but my fastboot crashes (Fastboot.exe Has stoped Working), tried to download fastboot again, but nothing helped. I also tried to flash recovery only, and I get the same thing... Also tried to do that with custom recovery, but nothing....
Is there something I can do, or do I need a new phone?
Also, I had like 70% battery when I started, so I am afraid to keep trying, cause if I go out of juice, it's game over, right?
Looks more like issues with your pc communicating with your device, which might have causes other side effects due to that. But I have not tried CM Installer yet.
You should see about getting fastboot working correctly first and getting the right adb/fastboot driver (such as latest Universal Naked Driver, link in my sig). You should also use the latest adb/fastboot .exe from Google, download their latest ADT package. If it still crash, use it on a different machine, if you're on Windows 8 try Windows 7 or Ubuntu.
Also make sure the factory image isn't corrupt, I always have issues downloading it from Google.
Also, I had like 70% battery when I started, so I am afraid to keep trying, cause if I go out of juice, it's game over, right?
Click to expand...
Click to collapse
If the battery goes to 0%, just charge it, do you think everyone throw away their N4 when the battery goes to 0? There is the red light problem, but its an easy fix.
Thanks for answering, I fixed it with a strange method (to me). On CM forum j_cor told me this:
"Your device appears to be stuck in sideload. So the good news is no, you are not bricked. Here is what I would try to do:
1. Boot the device - wait for the "stuck" CM guy to display
2. Plug phone to PC and open a command prompt to the directory to C:\Users\enter_your_name\cminstaller\bundle\win32
3. from the prompt "C:\Users\enter_your_name\cminstaller\bundle\win32>" type "adb.exe sideload ClockwordMod.cer" (no quotes) and hit enter
4. This will try and sideload this .cer file and will fail - but it should kick you out to the main recovery screen. Select the Reboot option from Recovery
5. Device should boot back up. It will most likely still be the stock ROM. My guess would be that something disrupted the sideload process when installing the system.zip with CM."
However, this did not fix my problem, but it got my phone to communicate with fastboot. So I was able to flash custom recovery, and do a factory reset, which brought me to the stock ROM, I flashed CM the old-fashioned way then.....
And my PHONE IS UP AND WORKING AGAIN!!!
The main problem in communication was that phone blocked every time I booted into fastboot, and plugged USB cable in.... It immediately became unresponsive to any commands, after I did this, phone wasn't getting stuck in fastboot, so that solved my issue.