Database Users

Xoom Stuck on red M!

Please help!!! After I was able to unlock my xoom and went reboot just before the adb remount command it just stays on the red M screen. I am able to get Starting RSD Protocol and Starting fastboot protocol at the top left but that is it. Also I have been able to connect with rsd lite but I dont have the sbf file and can't find it on the web anywhere. Please help!
Thanks in Advance

mhobbs82 said:
Please help!!! After I was able to unlock my xoom and went reboot just before the adb remount command it just stays on the red M screen. I am able to get Starting RSD Protocol and Starting fastboot protocol at the top left but that is it. Also I have been able to connect with rsd lite but I dont have the sbf file and can't find it on the web anywhere. Please help!
Thanks in Advance
Click to expand...
Click to collapse
If you are able to boot into Fastboot Protocol, you probably dont need rsd lite. You should be able to flash all of the files in the command prompt. Try re-locking your Xoom to see if that get you out of the soft brick. If it does, you can then try to unlock it again.
You can re-lock your Xoom by typing the following in the command prompt (while booted into fastboot protocol):
Code:
fastboot oem lock
Once you do this, follow the instructions on your Xoom's screen.
If it works, your Xoom should restart back into factory state once it's finished flashing the files.

I got it to lock back now I have Failed image LNX 0x0002 at the top??

Reboot in fastboot mode (power + vol up, after ~2 secs keep pressing vol-down repeadetly, until Fastboot appears; confirm selection with vol-up) and flash stock via fastboot
Code:
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
You may re-unlock your XOOM after successful update, re-root it, etc.

After the first line of code all I get is (cannot load 'system.img'). I really appreciate the help that I have gotten so far!
I now have managed to get it into CWM recovery... I am going to flash the rest of the steps in the universal root method.

Thanks again! I ended up reflashing the rom from CWM recovery and now I am rooted and back running! !!!

Im glad you were able to fix it.

Xoom wifi rooted but OEM locked again without any img files copied
I unlocked using fastboot oem unlock. But was trying to copy CM zip file using adb push. But I was getting stuck at fastboot screen where it says "starting fasboot protocol support" and nothing happens.
So I wiped /data and /cache
it did not help.
so I locked back again (fastboot oem lock). Now I am stuck with the message
Failed to boot LNX 0x0004
starting RSD mode 2
OneWire: Charger is connected....
Battery charge level: 92% (last two lines are irrelevant anyway)
SO I assume now that I dont have any image it wont boot normal. And since its locked I am not even able to get into fastboor or recovery which were installed correctly before.
help pls.
_TB_TB_ said:
Reboot in fastboot mode (power + vol up, after ~2 secs keep pressing vol-down repeadetly, until Fastboot appears; confirm selection with vol-up) and flash stock via fastboot
Code:
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
You may re-unlock your XOOM after successful update, re-root it, etc.
Click to expand...
Click to collapse
---------- Post added at 06:19 PM ---------- Previous post was at 05:54 PM ----------
I ca run fastboot command. fastboot reboot command does reboot the device. But then it comes back to the screen like this:
--> Fastboot
Starting Fastboot protocol support.
with the Red M in middle.
So I cam not able to run adb but can run fastboot commands. Due to this I can not copy the CM and flash using recovery.
I am able to get to recovery screen too by pressing volume down while rebooting.
But when I try adb push to copy the CM zip, it says error: device not found
Pl help. How do I get the CM zip to the device and run it using recovery (using clockwork).
sashykanth said:
I unlocked using fastboot oem unlock. But was trying to copy CM zip file using adb push. But I was getting stuck at fastboot screen where it says "starting fasboot protocol support" and nothing happens.
So I wiped /data and /cache
it did not help.
so I locked back again (fastboot oem lock). Now I am stuck with the message
Failed to boot LNX 0x0004
starting RSD mode 2
OneWire: Charger is connected....
Battery charge level: 92% (last two lines are irrelevant anyway)
SO I assume now that I dont have any image it wont boot normal. And since its locked I am not even able to get into fastboor or recovery which were installed correctly before.
help pls.
Click to expand...
Click to collapse
---------- Post added at 07:13 PM ---------- Previous post was at 06:19 PM ----------
Problem was I was using the wrong recovery image. Did not realize latest one does not work with xoom. Thanks. found the xoom recovery version in this forum.
sashykanth said:
I unlocked using fastboot oem unlock. But was trying to copy CM zip file using adb push. But I was getting stuck at fastboot screen where it says "starting fasboot protocol support" and nothing happens.
So I wiped /data and /cache
it did not help.
so I locked back again (fastboot oem lock). Now I am stuck with the message
Failed to boot LNX 0x0004
starting RSD mode 2
OneWire: Charger is connected....
Battery charge level: 92% (last two lines are irrelevant anyway)
SO I assume now that I dont have any image it wont boot normal. And since its locked I am not even able to get into fastboor or recovery which were installed correctly before.
help pls.
---------- Post added at 06:19 PM ---------- Previous post was at 05:54 PM ----------
I ca run fastboot command. fastboot reboot command does reboot the device. But then it comes back to the screen like this:
--> Fastboot
Starting Fastboot protocol support.
with the Red M in middle.
So I cam not able to run adb but can run fastboot commands. Due to this I can not copy the CM and flash using recovery.
I am able to get to recovery screen too by pressing volume down while rebooting.
But when I try adb push to copy the CM zip, it says error: device not found
Pl help. How do I get the CM zip to the device and run it using recovery (using clockwork).
Click to expand...
Click to collapse

pro3 727 version get bricked.

I try to twrp a rom in the forum,
1, I did set up "oem unlock" in the developer's menu. ( sorry I dont remember the extactly name , it's android settings by press 7 times of build number)
2, fastboot, do "fastboot oem lock-go"
3, fastboot boot recovery.img
4, format data, and cache, and flash one of rom.
and then when reboot, the logo does show. , then it goes to blank.
after I tried, it can enter fastboot & stock recovery mode, but cannot run twrp agian, because it tell me . that
"FAILED (remote: unlock device to use this command)"
and then I check the unlock information, it's locked again.
I need help :
1, how to back to stock version.
2, or how to enter twrp again..
thank you

qingcai said:
I try to twrp a rom in the forum,
1, I did set up "oem unlock" in the developer's menu. ( sorry I dont remember the extactly name , it's android settings by press 7 times of build number)
2, fastboot, do "fastboot oem lock-go"
3, fastboot boot recovery.img
4, format data, and cache, and flash one of rom.
and then when reboot, the logo does show. , then it goes to blank.
after I tried, it can enter fastboot & stock recovery mode, but cannot run twrp agian, because it tell me . that
"FAILED (remote: unlock device to use this command)"
and then I check the unlock information, it's locked again.
I need help :
1, how to back to stock version.
2, or how to enter twrp again..
thank you
Click to expand...
Click to collapse
Can't you download and install an official stock rom through stock recovery then try again?
---------- Post added at 09:35 PM ---------- Previous post was at 09:31 PM ----------
go here: http://forum.xda-developers.com/le-pro3/help/bricked-leeco-pro-3-installing-cm13-t3512999

After you boot to TWRP step did you flash the unlock file? Looks like you missed that.
http://forum.xda-developers.com/le-pro3/development/x727-model-persistent-bootloader-unlock-t3500388
"Now press "Install", select the x727-5.8.019s_bootloader-unlock.zip file and flash it."

1. Download the stock CN rom here.
http://g3.letv.cn/234/34/11/letv-hd...1S-5.8.018S.zip?b=123456&platid=5&splatid=500
2. Rename it to update.zip
3. Put it on a USB drive and hook it to the phone using an OTG adapter.
4. Boot to stock recovery and flash the ROM.

I think i miss it.
Tikerz said:
After you boot to TWRP step did you flash the unlock file? Looks like you missed that.
http://forum.xda-developers.com/le-pro3/development/x727-model-persistent-bootloader-unlock-t3500388
"Now press "Install", select the x727-5.8.019s_bootloader-unlock.zip file and flash it."
Click to expand...
Click to collapse

thanks all for helping,
I did download http://forum.xda-developers.com/le-pro3/development/x727-model-persistent-bootloader-unlock-t3500388, extract, and do below in fastboot mode:
fastboot flash xbl xbl.elf
fastboot flash aboot emmc_appsboot.mbn
then reboot into fastboot mode. it's unlocked. and can twrp or back to stock.
thanks

qingcai said:
thanks all for helping,
I did download http://forum.xda-developers.com/le-pro3/development/x727-model-persistent-bootloader-unlock-t3500388, extract, and do below in fastboot mode:
fastboot flash xbl xbl.elf
fastboot flash aboot emmc_appsboot.mbn
then reboot into fastboot mode. it's unlocked. and can twrp or back to stock.
thanks
Click to expand...
Click to collapse
Good job!
Sent from my LEX727 using Tapatalk

P9 hard bricked

This is my first time posting on XDA, so sorry if the formatting is bad.
I've tried to root my P9 lite installing TWRP and Magisk, everything went fine, until the last reboot that caused a bootloop.
Trying to fix this I mistakenly wiped the System partition (instead of Data), reading online people adviced to flash the update.zip, when i tried it I had "unable to mount /vendor" and "unable to mount /product".
I tried the update.app method and the eRecovery tool, but still nothing.
I read that the problem was probably caused by en error in boot.img or recovery.img, so i extracted those files from the firmware and flashed them using TWRP. By doing so i deleted TWRP itself leaving me unable to flash system.img.
I tried to flash it using fastboot, but every time i try to write a command regarding flashing i get a FAILED (remote: command not allowed).
Now i have a bricked phone, i can access fastboot but it doesnt seem to be working. I cant access adb since i can't access the recovery (at least i dont know how to ).
Any advices?

Do you have bootloader unlock code?

Dino_S said:
Do you have bootloader unlock code?
Click to expand...
Click to collapse
Yes I do.

Unlock bootloader again and in fastboot flash system.img and boot from firmware,I used b370
---------- Post added at 12:46 AM ---------- Previous post was at 12:38 AM ----------
Extract from update.zip file update.app and use huawei update extractor and extract files from that system.img and boot.img and put in fastboot folder and flash it

Dino_S said:
Unlock bootloader again and in fastboot flash system.img and boot from firmware,I used b370
---------- Post added at 12:46 AM ---------- Previous post was at 12:38 AM ----------
Extract from update.zip file update.app and use huawei update extractor and extract files from that system.img and boot.img and put in fastboot folder and flash it
Click to expand...
Click to collapse
I can't, whenever I try using a fastboot command I get "FAILED (remote: command not allowed)

How much is internal data memory in twrp

Dino_S said:
How much is internal data memory in twrp
Click to expand...
Click to collapse
Around 10 gb, by the way I can't access twrp anymore, since I flashed recovery.img

TinkyWinkyJr said:
Around 10 gb, by the way I can't access twrp anymore, since I flashed recovery.img
Click to expand...
Click to collapse
It is showing in fastboot mode unlocked both

Dino_S said:
It is showing in fastboot mode unlocked both
Click to expand...
Click to collapse
Bootloader unlocked and FPR locked (or is it FRP?)

I have same prob yesterday,and showing me same thing,but i flashed twrp again and format data and system to ext4,and from fastboot flash system and boot img and it booted,it is confusing to undestand yours problem
---------- Post added at 01:15 AM ---------- Previous post was at 01:14 AM ----------
TinkyWinkyJr said:
Bootloader unlocked and FPR locked (or is it FRP?)
Click to expand...
Click to collapse
Mine showing FRP unlocked

hey guys
i have the same problem, had rr marshmallow on my p9 lite and tried to flash the new recovery for nougat by old droid. since then i cant enter nowhere without fastboot. phone unlocked and frp unlocked. does anybody have another idea. flashing stock recovery did not work, flashing twrp did also not work. need more ideas, erecovery and dload method do not work, i have acces to fastboot

Try to flash the correct oem.info.I've had the same problem with my P9(EVA-L09).

Huawei p8 lite stuck in rescue mode

Hi i have the problem, yesterday i tried to root the phone. I unlocked bootloader succefully but after root i got bootloop so i tried to wipe the data and reinstall stock ROM. And i think this is where i messed something up. After this my telefon just go to rescue mode with errors Func NO: 10 boot image and Error NO: 2 load image. But when i try to go to the recovery i have Func NO : 11 recovery image. Help me i am very sad. :C

halk15 said:
Hi i have the problem, yesterday i tried to root the phone. I unlocked bootloader succefully but after root i got bootloop so i tried to wipe the data and reinstall stock ROM. And i think this is where i messed something up. After this my telefon just go to rescue mode with errors Func NO: 10 boot image and Error NO: 2 load image. But when i try to go to the recovery i have Func NO : 11 recovery image. Help me i am very sad. :C
Click to expand...
Click to collapse
Try flashing stock ROM using fastboot
use Huawei update extractor select boot ,system,cust,recovery ,extract them and flash them with fastboot like this
fastboot flash system system.img
fastboot flash boot boot.img etc....
just make sure that you place those img files in same folder as adb is.
---------- Post added at 06:50 PM ---------- Previous post was at 06:46 PM ----------
halk15 said:
Hi i have the problem, yesterday i tried to root the phone. I unlocked bootloader succefully but after root i got bootloop so i tried to wipe the data and reinstall stock ROM. And i think this is where i messed something up. After this my telefon just go to rescue mode with errors Func NO: 10 boot image and Error NO: 2 load image. But when i try to go to the recovery i have Func NO : 11 recovery image. Help me i am very sad. :C
Click to expand...
Click to collapse
https://forum.xda-developers.com/showthread.php?t=2277112 check this if you dont know how to setup fastboot

Nikola6511 said:
Try flashing stock ROM using fastboot
use Huawei update extractor select boot ,system,cust,recovery ,extract them and flash them with fastboot like this
fastboot flash system system.img
fastboot flash boot boot.img etc....
just make sure that you place those img files in same folder as adb is.
---------- Post added at 06:50 PM ---------- Previous post was at 06:46 PM ----------
https://forum.xda-developers.com/showthread.php?t=2277112 check this if you dont know how to setup fastboot
Click to expand...
Click to collapse
Well, if i only could go into fastboot mode. I have only rescue mode (no fastboot and rescue). ADB don't see the phone.

halk15 said:
Well, if i only could go into fastboot mode. I have only rescue mode (no fastboot and rescue). ADB don't see the phone.
Click to expand...
Click to collapse
Seems like your boot image is damaged but check this thread maybe it helps https://forum.xda-developers.com/p8lite/help/stuck-rescue-mode-screen-please-help-t3244872

usually you should always get into fastboot mode. Turn off your phone, connect it to PC, press power and volume down, after screen turns on release the PowerButton and keep holding VolumeDown, until you are in fastboot mode. Then use fastboot to flash a new boot, recovery and system

Hello all,
I have a similar problem on my old P8 lite phone, but I can enter into fastboot mode. No idea how it turned out like this... I bought a P20 lite and stoped using P8 lite for several months. Some days ago, tried to use the phona and it was unresponsive. Wiped data and some more options, and the phone got stuck on rescue mode.
I've read this and other threads and tried to use fastboot to flash stock ROM again. I downloaded update file, extracted boot.img, system.img, cust.img and recovery.img but when I try, to start flashing boot.img I get:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash boot BOOT.IMG
target reported max download size of 471859200 bytes
sending 'boot' (22688 KB)...
OKAY ( 0.588s)
writing 'boot'...
FAILED (remote: Command not allowed)
finished. total time: 0.592s
When I enter fastboot & rescue mode I get the messagem "PHONE Locked" (green letters). What can I do to recover the phone?
TIA for your help.

Skw-a0 bricked

hi guys can some one help me to recover the device, phone stuck at logo i can acces fastboot but i cant acces recovery mode. I flashed a fastbootm rom i found on the web, now the phone is bricked

Black Shark QNA
Hi, @damond share your mobile device model (is it shark 2 pro or shark) also let me know if these commands are working in your fastboot mode, fastboot devices
fastboot reboot bootloader
fastboot reboot recovery (this will lead you to phone recovery mode try formatting through this, it works always) if it doesn't, confirm.
Also, share the your device origin (like it was on global rom or CN rom) and if bootloader is unlocked or not.
If required, will create a fastboot rom for your device.
Thanks
---------- Post added at 10:07 AM ---------- Previous post was at 09:55 AM ----------
damond said:
hi guys can some one help me to recover the device, phone stuck at logo i can acces fastboot but i cant acces recovery mode. I flashed a fastbootm rom i found on the web, now the phone is bricked
Click to expand...
Click to collapse
Hi, @damond share your mobile device model (is it shark 2 pro or shark) also let me know if these commands are working in your fastboot mode, fastboot devices
fastboot reboot bootloader
fastboot reboot recovery (this will lead you to phone recovery mode try formatting through this, it works always) if it doesn't, confirm.
Also, share the your device origin (like it was on global rom or CN rom) and if bootloader is unlocked or not.
If required, will create a fastboot rom for your device.
Thanks

Shubhendu Shubham Sharma said:
Hi, @damond share your mobile device model (is it shark 2 pro or shark) also let me know if these commands are working in your fastboot mode, fastboot devices
fastboot reboot bootloader
fastboot reboot recovery (this will lead you to phone recovery mode try formatting through this, it works always) if it doesn't, confirm.
Also, share the your device origin (like it was on global rom or CN rom) and if bootloader is unlocked or not.
If required, will create a fastboot rom for your device.
Thanks
---------- Post added at 10:07 AM ---------- Previous post was at 09:55 AM ----------
Hi, @damond share your mobile device model (is it shark 2 pro or shark) also let me know if these commands are working in your fastboot mode, fastboot devices
fastboot reboot bootloader
fastboot reboot recovery (this will lead you to phone recovery mode try formatting through this, it works always) if it doesn't, confirm.
Also, share the your device origin (like it was on global rom or CN rom) and if bootloader is unlocked or not.
If required, will create a fastboot rom for your device.
Thanks
Click to expand...
Click to collapse
hi thanks for answering the model is black shark 2, skw-a0, i dont know if its posiblle to flash a global rom. Thanks in advance.

damond said:
hi thanks for answering the model is black shark 2, skw-a0, i dont know if its posiblle to flash a global rom. Thanks in advance.
Click to expand...
Click to collapse
Have you tried running fastboot commands( just copy paste the commands as it is in fast boot mode one by one
1. Fastboot reboot bootloader
2. Fastboot reboot recovery (use it to format your phone)
3. Fastboot erase userdata

Shubhendu Shubham Sharma said:
Have you tried running fastboot commands( just copy paste the commands as it is in fast boot mode one by one
1. Fastboot reboot bootloader
2. Fastboot reboot recovery (use it to format your phone)
3. Fastboot erase userdata
Click to expand...
Click to collapse
no i have not tried those commands, but i will as soon as a i get back home.

Shubhendu Shubham Sharma said:
Have you tried running fastboot commands( just copy paste the commands as it is in fast boot mode one by one
1. Fastboot reboot bootloader
2. Fastboot reboot recovery (use it to format your phone)
3. Fastboot erase userdata
Click to expand...
Click to collapse
Fastboot reboot bootloader, Fastboot erase userdata was succesfully, but Fastboot erase userdata gives error. And it still stuck at logo

damond said:
Fastboot reboot bootloader, Fastboot erase userdata was succesfully, but Fastboot erase userdata gives error. And it still stuck at logo
Click to expand...
Click to collapse
You ran twice same commands. One time it was successful and the other time it failed can you share the error.
Also, try this command (just copy paste it)
Fastboot devices
Fastboot reboot recovery.
Then try wiping out the phone.

C:\adb>Fastboot reboot recovery.
fastboot: usage: unknown reboot target recovery.
C:\adb>Fastboot reboot recovery
Rebooting into recovery OKAY [ 0.000s]
Finished. Total time: 0.000s
C:\adb>
But the phone does not enter recovery mode, it goes black and then black shark logo, it looks like there is no recovery partition.

Cool, give me a day or two, will create and share the fastboot rom to flash.

thanks ill be wating

MP6_Pie-ROM_Black_Shark_2_Pro
damond said:
thanks ill be wating
Click to expand...
Click to collapse
Hi, steps to flash this rom.
1. Download files from the Link (cannot post the link due to XDA Restriction)
2. Once download is completed, extract the zip file.
3. Run the Flash_All as administrator.
4. Allow the process to complete.
Once done, enjoy your phone
If this works do give me a thumbs up. If you face any issue let me know.
Share an email id of place where I can share the link.
Thanks.

hi bro i send you a pm with email

h, can you send me the link please?

Update On Issue
damond said:
h, can you send me the link please?
Click to expand...
Click to collapse
As per our discussion over the email. I hope your issue is resolved. If not let me know.
Thanks

Shubhendu Shubham Sharma said:
Bro plz help me.
I've flashed cn beta on global bs2 and now i can't receive ota.
I want joy ui cn with working ota on my device.
*Sry 4 my bad English.
Click to expand...
Click to collapse

Mohit 22 said:
Shubhendu Shubham Sharma said:
Bro plz help me.
I've flashed cn beta on global bs2 and now i can't receive ota.
I want joy ui cn with working ota on my device.
*Sry 4 my bad English.
Click to expand...
Click to collapse
Hi Mohit, is your bootloader still unlocked. Confirm
Click to expand...
Click to collapse

Shubhendu Shubham Sharma said:
Hi, @damond share your mobile device model (is it shark 2 pro or shark) also let me know if these commands are working in your fastboot mode, fastboot devices
fastboot reboot bootloader
fastboot reboot recovery (this will lead you to phone recovery mode try formatting through this, it works always) if it doesn't, confirm.
Also, share the your device origin (like it was on global rom or CN rom) and if bootloader is unlocked or not.
If required, will create a fastboot rom for your device.
Thanks
---------- Post added at 10:07 AM ---------- Previous post was at 09:55 AM ----------
Hi, @damond share your mobile device model (is it shark 2 pro or shark) also let me know if these commands are working in your fastboot mode, fastboot devices
fastboot reboot bootloader
fastboot reboot recovery (this will lead you to phone recovery mode try formatting through this, it works always) if it doesn't, confirm.
Also, share the your device origin (like it was on global rom or CN rom) and if bootloader is unlocked or not.
If required, will create a fastboot rom for your device.
Thanks
Click to expand...
Click to collapse
Sorrys I work for 16h. My model is BS2, no PRO.
now I am going to test the commands that you have recommended me to use. Thanks, when I try them I comment on the result ^^
sorry i got confused from post.
yesterday I started a topic with a similar problem and I thought it was my post. I think some moderator deleted it because I can't find it. I just created another post with my case

Dude what issue you are facing please explain in detail. I am here to help .

damond said:
C:\adb>Fastboot reboot recovery.
fastboot: usage: unknown reboot target recovery.
C:\adb>Fastboot reboot recovery
Rebooting into recovery OKAY [ 0.000s]
Finished. Total time: 0.000s
C:\adb>
But the phone does not enter recovery mode, it goes black and then black shark logo, it looks like there is no recovery partition.
Click to expand...
Click to collapse
it happens the same to me. it does not restart me in recoveri mode.
Yesterday I don't remember how, but I managed to get into recovery mode. I only had 3 options. I remember making wipes and deleting the data but the mobile remained the same

Deke79 said:
it happens the same to me. it does not restart me in recoveri mode.
Yesterday I don't remember how, but I managed to get into recovery mode. I only had 3 options. I remember making wipes and deleting the data but the mobile remained the same
Click to expand...
Click to collapse
Hi deke what issue are you facing. Please help me with that, will try to resolve.