Database Users

[REQUEST] 36 dpi navbar with stock battery

I just could find 36 dpi navbar with other battery mods, but I just want to change the navbar and maintain the battery icon as stock. Also when I flash 1 of this mods with battery mods and then flash the stock battery, the "back" button goes bigger than the home and the other button.
If some1 can share a flashable zip with the 36 dpi navbar with no other mod will be appreciated.

No1 can help?
Enviado desde mi Nexus 4 usando Tapatalk 2

Zetok said:
No1 can help?
Enviado desde mi Nexus 4 usando Tapatalk 2
Click to expand...
Click to collapse
What ROM are you running. framework-res.apk's can vary from ROM to ROM, so the correct one would have to be modified accordingly. Better yet, upload your current /system/framework/framework-res.apk, and the odds of someone assisting would greatly increase

If you use AOKP you can adjust the size of the Nav bar

graffixnyc said:
If you use AOKP you can adjust the size of the Nav bar
Click to expand...
Click to collapse
Hopefully, we can give the OP the benefit of the doubt that if he were running AOKP, he'd know that :silly:

JsChiSurf said:
Hopefully, we can give the OP the benefit of the doubt that if he were running AOKP, he'd know that :silly:
Click to expand...
Click to collapse
Well, I didn't mean if he currently was. I meant if he does run AOKP he can change it. I think a few other ROMs allow you to change the size of the nav bar as well

graffixnyc said:
Well, I didn't mean if he currently was. I meant if he does run AOKP he can change it. I think a few other ROMs allow you to change the size of the nav bar as well
Click to expand...
Click to collapse
Ah, gotcha. My best guess is CM, since they're vehemently opposed to building that option in

Thx for replies. Im using Factory 4.2.1 unlocked and rooted
Enviado desde mi Nexus 4

I know I had tried to decompile the framework when 4.2.1 was first released but apktool wasn't working for 4.2.1 yet. I haven't checked if it's been updated to work with 4.2.1. since. If so I can make the change in literally 2 seconds. I have to hunt down the new version of apktool if it's around for my own stuff as well

I've already got it done for the custom 4.2.1 I'm running of CM. 4.2.1 decompiles w/o issue with the latest apktool.
I'd have to download the whole stock ROM to grab the framework-res so if the OP can upload, it would make life much easier for whomever wants to do it.

So I downloaded a stock 4.2.1 ROM (brain fart by the way, it's framework-res, not SystemUI), and quickly tweaked the nav bar height for you to be 36 dpi in both portrait and landscape.
Attached is the APK, that you can reboot into recovery, mount system, and push to your /system/framework folder (adb push framework-res.apk /system/app/)
I didn't have a chance to make a flashable zip, but can later if someone doesn't do so. Headed out now.
Nandroid first (untested, but minor change).
https://dl.dropbox.com/u/14593842/New folder/framework-res.apk

JsChiSurf said:
I've already got it done for the custom 4.2.1 I'm running of CM. 4.2.1 decompiles w/o issue with the latest apktool.
I'd have to download the whole stock ROM to grab the framework-res so if the OP can upload, it would make life much easier for whomever wants to do it.
Click to expand...
Click to collapse
Nice, do you happen to have a link to the latest apktool? If not no biggie, I'll search for it when I get home
Sent from my Nexus 4 using Tapatalk 2

graffixnyc said:
Nice, do you happen to have a link to the latest apktool? If not no biggie, I'll search for it when I get home
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Here's a link to the latest compatible with 4.2.1:
http://android-apktool.googlecode.com/files/apktool1.5.2.tar.bz2

JsChiSurf said:
Here's a link to the latest compatible with 4.2.1:
http://android-apktool.googlecode.com/files/apktool1.5.2.tar.bz2
Click to expand...
Click to collapse
Thank you kindly sir

graffixnyc said:
Thank you kindly sir
Click to expand...
Click to collapse
No problem.
BTW, just got home, so figured I'd drop this into a flashable zip.
Can't stress enough that each ROMs framework-res can be unique based on what is compiled in, etc, and should not be cross pollinated.
As such, I am "assuming" this should work on a stock / unmodified ROM, as I downloaded a ROM from the ROM section that claimed to be stock. Without working from the file directly from your phone, there's no guarantees, so make a nandroid first.
Here's a link to the 36dpi navbar for stock rom 4.2.1:
https://dl.dropbox.com/u/14593842/jb/36dpiNavBar_signed.zip
Lastly, after doing this, I see there is another thread where some similar work has been done, but it looks like that also includes changes to SystemUI that may affect other things. This is just a framework-res tweak for the nav bar height only, and nothing else.
Hope that helps.

You guys make my day. I dodnt try it yet cause I dont now how to use the adb push . if you have time and can upload a fladhable zip, I will test it without a doubt. Also I think theres a lot of people who wants this mod.
Enviado desde mi Nexus 4

Zetok said:
You guys make my day. I dodnt try it yet cause I dont now how to use the adb push . if you have time and can upload a fladhable zip, I will test it without a doubt. Also I think theres a lot of people who wants this mod.
Enviado desde mi Nexus 4
Click to expand...
Click to collapse
See post above yours :laugh:.
Nandroid and give it a shot. If no luck, grabbing your existing framework-res file will help immensely.

Relly thx. I ready trst it but the back button is showimg bigger than the other 2. Look at the pic
Enviado desde mi Nexus 4

Zetok said:
Relly thx. I ready trst it but the back button is showimg bigger than the other 2. Look at the pic
Click to expand...
Click to collapse
This tweak flashes a modified framework-res. The actual buttons (image icons) for the navbar are provided in SystemUI.apk, so what you flashed does not touch that aspect.
It would seem to me, therefore, that you've flashed other mods that have modified your SystemUI.apk and the corresponding button images (best guess).

Can you share the flashable stock system ui? If not I will reflash the stock rom and then the 36 dpi mod
Enviado desde mi Nexus 4

[MOD][PORT] Ink effect

Hi guys! I sucessfully port the Ink effect for our phone, so enjoy
What is Ink effect??
Check this out
Requirements:
*A SGSA ¡I9070! :silly:
*With Jelly Bean
*And with the rom deodexed
Got it? Cool :highfive:
How I can install this? :silly:
-Download the link that you want and the end of the post
-Put in your sd card
-Turn off your phone and go to recovery (CWM)
-And flash it
Links:
Ink effect (for stock roms)
http://d-h.st/i2v (Added hungarian, italian and spanish languages) Thanks to jkristoph
Ink effect (for rom JellyMOD 4.0)
http://d-h.st/jDB
DON'T FORGET TO HIT THANKS BUTTON IF YOU LIKE THIS

Hello, can you help me port this to Ace II? I plan on using it for my ROM. You and your work will be acknowledged. Thanks

Dr01nE said:
Hello, can you help me port this to Ace II? I plan on using it for my ROM. You and your work will be acknowledged. Thanks
Click to expand...
Click to collapse
Currently I can't help you because i'm very busy with my exams and all that stuff... but if you like you can port it by yourself, following this guide
http://forum.xda-developers.com/showthread.php?t=2034565 it's pretty easy ... Ans sorry but I can't help you

Nice port. Nice that you've even added the AOSP lockscreen. But just one question. Why have you used the SecSettings.apk from XXLPY firmware and framework-res.apk from XXLQ4 firmware?? (Not criticising or anything, just asking)
And I found a bug. When I click save while selecting the ink colour, the window doesn't automatically close!
Sent from my GT-I9070 using xda premium

Abhinandh Ajay said:
Nice port. Nice that you've even added the AOSP lockscreen. But just one question. Why have you used the SecSettings.apk from XXLPY firmware and framework-res.apk from XXLQ4 firmware?? (Not criticising or anything, just asking)
And I found a bug. When I click save while selecting the ink colour, the window doesn't automatically close!
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
-Because I want to use those
-And that it's not a bug it's a freaking small glitch..

after I flashed the ink effect for Jelly Mod, I lost some of the design changes of the ROM (like the blue switch button on Settings) and even the popup backgrounds (see below what I am talking about)
Don't mind the statusbar changes, that was me (the thing is, it was not like that after I changed the SystemUI)

oluccas said:
after I flashed the ink effect for Jelly Mod, I lost some of the design changes of the ROM (like the blue switch button on Settings) and even the popup backgrounds (see below what I am talking about)
Don't mind the statusbar changes, that was me (the thing is, it was not like that after I changed the SystemUI)
Click to expand...
Click to collapse
Wich file you download? wich rom are you using?

I'm using JellyMod 4.0 and downloaded the ink effect for this ROM. But I thought I had flashed JellyMod on XXLQ4, now I realized I installed XXLQB and forgot to go back to XXLQ4 before flashing JellyMod. Do you think that could be the problem? (remembering that the AOSP was perfect with JellyMod before flashing the Ink Effect) (maybe it is because of the android.policy or something)
@Edit:
I guess the problem is not here, but on the framework-res.apk you provided (on Ink effect for JellyMOD 4.0.zip). I downloaded the .zip, copied framework-res.apk to my apk multi-tool folder, decompiled it and realized that some pictures in drawable-hdpi folder are not the ones used on JellyMOD 4.0. For example, the tw_switch_thumb_activated_holo_dark.png is green, and not blue. Please, fix it

martin_carpio17 said:
Currently I can't help you because i'm very busy with my exams and all that stuff... but if you like you can port it by yourself, following this guide
http://forum.xda-developers.com/showthread.php?t=2034565 it's pretty easy ... Ans sorry but I can't help you
Click to expand...
Click to collapse
I didn't really need "actual" help. They guide would suffice.Thanks

If i'm using Chucky's rom which one of your mods will work?

Im on LQB and after flashing this ink effect zip file, its not coming in lockscreen settings.
Sent from my GT-I9070 using xda app-developers app

can I use it whit only cocore E 5 installed ?

migaia said:
can I use it whit only cocore E 5 installed ?
Click to expand...
Click to collapse
It has nothing to do with the kernel.. So yes you can use it.
Sent from my GT-I9070 using xda premium

sameer4344 said:
It has nothing to do with the kernel.. So yes you can use it.
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
ok but I've stock rom not deodexed. can I flash the first link for stock rom ???

Not working for me in jellymod 4, lq4 with cocore e 5.0...flash using cwm..
Sent from my GT-I9070 using xda premium

migaia said:
ok but I've stock rom not deodexed. can I flash the first link for stock rom ???
Click to expand...
Click to collapse
I've not tried it on a deodexed rom.. But it should work.
Sent from my GT-I9070 using xda premium

R: [MOD][PORT] Ink effect
I flashed the zip for stock rom and now I' ve ripple effect but not ink effect !
Inviato dal mio GT-I9070 con Tapatalk 2

Thanks a lot ! :good:

Not working..flashed the zip file but nothing came..im on LQB.
Sent from my GT-I9070 using xda app-developers app

Ink
I just installed this mod and it still fails with the effect "ink" only got the normal effect of water

[noob][guide][friendly] double tap to wake up your screen

HERE THE GUIDE TO WAKE UP YOUR SCREEN ON DOUBLE TAP
NEEDED REQUIREMENTS
1. ROOTED
2. TWRP RECOVERY
3. KERNEL
4. TRICKSTER MOD
FIRST DOWNLOAD THE KERNEL FROM HERE http://http://forum.xda-developers.com/moto-e/orig-development/kernel-motorola-moto-e-t2872619 I AM USING THIS FOR ALMOST 3 DAYS DIDN'T GET ANY LAG :good: THANKS TO DEVELOPER
DOWNLOAD THE TRICKSTER MOD APPLICATION HERE http://https://play.google.com/store/apps/details?id=com.bigeyes0x0.trickstermod&hl=en
HOPE YOU ROOTED YOUR DEVICE AND INSTALLED TWRP RECOVERY . IF NOT FOLLOW THIS GUIDE http://forum.xda-developers.com/showthread.php?t=2755336
PROCEDURE
1. PLACE THE DOWNLOADED KERNEL INTO YOUR INTERNAL STORAGE
2. ENTER INTO YOUR TWRP RECOVERY *FLASH YOUR KERNEL*
3. INSTALL THE TRICKSTER MOD APPLICATION
(OPEN THE TRICKSTER MOD AND ENTER INTO "SPECIFIC" > SCREEN WAKE CONTROL > DOUBLE TAP2WAKE " CHANGE THE VALUE 0 TO 1)
ADDED SCREEN SHOT TO SOME QUERIES
HOPE THIS MAY HELP YOU
EASIEST WAY TO DO THAT
(IF ANYTHING HAPPEN TO YOUR DEVICE WE ARE NOT RESPONSIBLE)
(IF ANY BUG YOU NOTICE IN THE KERNEL PLEASE KINDLY SHARE INTO THE KERNEL PAGE)
*IF YOU LIKE THIS GUIDE PLEASE HIT THE THANKS BUTTON AND ALSO IF YOU LIKE THE KERNEL SHARE YOUR FEEDBACKS ON KERNEL PAGE*
THANKS IN ADVANCE

work in cm11?
Sorry my bad english im from Brasil
Sent from my Moto E XT1025

DAVI FELICIANO said:
work in cm11?
Sorry my bad english im from Brasil
Sent from my Moto E XT1025
Click to expand...
Click to collapse
yes it works with cm11 use aosp ver of the kernel

AshuGite said:
yes it works with cm11 use aosp ver of the kernel
Click to expand...
Click to collapse
thanks im using now
Sorry my bad english im from Brasil
Sent from my Moto E XT1025

Delete
Sent from my XT1022 using xda premium

Thanks for this awesome guide :thumbup:

welcome
:good:
Kalim Siddiqui said:
Thanks for this awesome guide :thumbup:
Click to expand...
Click to collapse

What about PA? Does the kernel work on PA too?
Sent from my XT1022 using XDA Free mobile app

Thanks

woks
Prashanth Meesara: said:
What about PA? Does the kernel work on PA too?
Sent from my XT1022 using XDA Free mobile app
Click to expand...
Click to collapse
it works well on PA too

Million Thanks
Awesome !!!
Since last 3-4 Months after updating my Moto E to 4.4.4
Whenever I need my mobile the most it restarts sometimes 10-12 times a day
As others I tried each and every ROM and tricks available in internet
but after using your tips its working smooth
No Random Restart since 55 Hours.
:laugh: :laugh: :laugh: :laugh: :laugh:
A Million Thanks Again

Work with CM recovery?
Work with CM recovery? reply please :v

Welcome
thegoldendart said:
Awesome !!!
Since last 3-4 Months after updating my Moto E to 4.4.4
Whenever I need my mobile the most it restarts sometimes 10-12 times a day
As others I tried each and every ROM and tricks available in internet
but after using your tips its working smooth
No Random Restart since 55 Hours.
:laugh: :laugh: :laugh: :laugh: :laugh:
A Million Thanks Again
Click to expand...
Click to collapse
It's my pleasure to help you guy

How to flash kernel?
Sent from my XT1022 using XDA Premium 4 mobile app

stock
is this work stock rom?

dharsayantan said:
is this work stock rom?
Click to expand...
Click to collapse
Yes:thumbup::thumbup:

AshuGite said:
yes it works with cm11 use aosp ver of the kernel
Click to expand...
Click to collapse
does it Work on cm I2 ??

Saraf Vikyath said:
does it Work on cm I2 ??
Click to expand...
Click to collapse
nop.. its for kitkat only...

thanks bro this helped me out alot

Any way to make this work in lollipop?

(Closed) How to install Pa Gapps in 5.1 roms and stock (Pa as released Gapps 5.1)

PA as released PA Gapps 5.1 03/25/15

I see the script for "before" and "after" is the same except the "after" doesn't have a build.prop. can you explain. Thanks.

dEris said:
I see the script for "before" and "after" is the same except the "after" doesn't have a build.prop. can you explain. Thanks.
Click to expand...
Click to collapse
They are not the same thing, "before" makes a backup of your build and replaces it with a build cm 5.0.2. The "after" restores its original build.prop.
Enviado de meu Nexus 5 usando Tapatalk

davidsonsjesus said:
They are not the same thing, "before" makes a backup of your build and replaces it with a build cm 5.0.2. The "after" restores its original build.prop.
Enviado de meu Nexus 5 usando Tapatalk
Click to expand...
Click to collapse
Gotcha. But good news, this worked.

Sorry to ask, but what are the advantages of flashing PA GApps to stock rom?
Regards, Zagor

zagorteney said:
Sorry to ask, but what are the advantages of flashing PA GApps to stock rom?
Regards, Zagor
Click to expand...
Click to collapse
Keep updated on google apps on /system since the PA gapps always installs the apps on the root. even if you install the stock now she will already be outdated and will occupy your precious mbs installing new versions of the apps on the /data.
Enviado de meu Nexus 5 usando Tapatalk

New versions of the scripts (the names are unchanged).
before (corrected dpi from 420 to 480 cm in build.prop)
after (remove backup build.prop after restoration)

davidsonsjesus said:
Keep updated on google apps on /system since the PA gapps always installs the apps on the root. even if you install the stock now she will already be outdated and will occupy your precious mbs installing new versions of the apps on the /data.
Enviado de meu Nexus 5 usando Tapatalk
Click to expand...
Click to collapse
Sorry, but I'm from the Earth.

zagorteney said:
Sorry, but I'm from the Earth.
Click to expand...
Click to collapse
Be happy!
Enviado de meu Nexus 5 usando Tapatalk

davidsonsjesus said:
Be happy!
Enviado de meu Nexus 5 usando Tapatalk
Click to expand...
Click to collapse
I'm not. I just wan't to say, that I didn't get it.
So you actually figure it out, how to integrate an updates of system apps into rom. I've allready make a thread about this, but for now we still didn't resolve this problem. It is impossible to just move updates from /data/app to /system/app or /system/priv-app.
May it be just of build.prop?
Regards, Zagor

Xperia Z3 [D6603] 23.5.A.1.291 DEODEXED Stock ROM (Kernel and Baseband Included)

Edit 2018: Mediafire removed the file due to it being "a virus". In reality they attempted to get me to purchase a bitdefender subscription from them to "fix" the viruses on my PC. They targeted random files as some versions of Fragment ROM which is based on THIS ROM were left up (where is the virus??).
Sorry guys I don't have a copy so it's up to someone else to host if they have a copy and feel like it.
The page now stands for reference:
Xperia Z3 Deodexed Stock 23.5.A.1.291 GLOBAL
Model: D6603
(The obvious disclaimer: I am not responsible for anything that goes wrong with your device if you flash this. I have taken as many steps possible to ensure top quality and am running this myself, but you have been warned!!)
Not much to say really. Latest Sony release ready to be flashed or used as ROM base. RXSMB members (you know who you are) don't need any permission to use this, others please send a quick PM I'm pretty good at responding quickly. I know how much of a pain choosing your base can be.
All stock as it was when Sony released it. Only been deodexed by myself.
Can be flashed on Locked Bootloader and will give you root and recovery (TWRP 3.0.2 and SuperSU 2.76). Includes the latest kernel and baseband 61 from the ftf, but that is all. No FOTA etc.
V2 Changelog: SuperUserMOD integrated. No need to flash the patch.
Removed Chrome, Browser and Drive from system. Download from Play if you need.
Deodexed the two apks in system/vendor/apps that I missed
The APN downloader (ie Download Internet Settings) is fixed - Special Thanks to @Rajeev for this
MediaFire link: Removed due to their racketeering. Flagged file as virus trying to make me purchase bitdefender from them. lol.
MD5: de083b0d5818f364aee6fc60c695bc5f
Patch V1 to V2: Removed for same reason as ROM
(You still need to manually delete from /system/app - Browser, Chrome, and Drive folders --- If it still doesn't work just install the main V2. Dirty flash will be fine)
For all versions there is a Chrome issue. To FIX navigate with a root browser to system/vendor/apps and delete the ChromeCustomizations folder and the ims folder. Reboot and Chrome from Play Store will work now.
Install Instructions:
(Best results will come from installing over Marshmallow)
Boot into TWRP Recovery
Clean install recommended (wipe only data), but not entirely necessary unless you have issues. Do not wipe System as this is done by scripts.
Flash the ROM
Wipe dalvik and cache
Count to three
Reboot
Any issues let me know ASAP in comments.
Additionally people seem to be having issues with the Stock Browser and Google Drive. It is best to delete them with a root browser from /system/app and then install them from Play Store.
ADDONS:
SuperUserMod made by editing the services.jar. Flashable zip for recovery. It will overwrite the services.jar in framework. Please make a backup before flash (just in case).
Removed for same reason as ROM
Huge thanks to all of RXSMB Team for guidance on getting this together and also to @Bloodlvst and @kansasboy001 for helping with the baseband stuff and @Pandemic for some of the installer. Biggest thanks to @Wolfbreak for Root and Recovery and making it possible on MM.
ENJOY!!!
(If I need to adjust this thread, the ROM, my attitude etc please PM me straight away to work things out. First proper ROM post even though it's stock so I can still get stuff wrong and I know that)

The z3 is on different models, this one which is it? Thanks
Trimis de pe al meu D6603 folosind Tapatalk

valentinrascu said:
The z3 is on different models, this one which is it? Thanks
Trimis de pe al meu D6603 folosind Tapatalk
Click to expand...
Click to collapse
Ah yes sorry important information!!!
D6603
Updating OP

Dobsgw said:
Ah yes sorry important information!!!
D6603
Updating OP
Click to expand...
Click to collapse
Great work brother. I am little late. Already deodexed my stuff. Anyway thanks alot for sharing brother

Thank you so much for your work.
I like that there is no type of change but only Deodexed.
Just one question: icon or 4G LTE?
Thanks anyway friend. :good::good:

xfire said:
Thank you so much for your work.
I like that there is no type of change but only Deodexed.
Just one question: icon or 4G LTE?
Thanks anyway friend. :good::good:
Click to expand...
Click to collapse
Not 100? sure as I use a ported system UI from Xperia X.
I imagine it's just the 4G icon as I used the Global ftf from Sony. If it's not in the system UI then it's definitely the 4G icon as this is what I have.

Great work bro \m/
Sent from MWA Pro-Spect V1.0.0 On My Z5

Nice! Now i only need superuser mod ?

how to deodex sony's rom

krushhh said:
Nice! Now i only need superuser mod
Click to expand...
Click to collapse
If you need SuperUserMod I have just edited the services.jar so it is integrated right into the ROM. Flashable zip so just flash and it should work. Would be nice if you could test for me. Working fine for me

Dobsgw said:
If you need SuperUserMod I have just edited the services.jar so it is integrated right into the ROM. Flashable zip so just flash and it should work. Would be nice if you could test for me. Working fine for me
Click to expand...
Click to collapse
So ur rom (link) from post 1 is already updated?

krushhh said:
So ur rom (link) from post 1 is already updated?
Click to expand...
Click to collapse
No it's an add on.
I edited the services.jar to have SUMod. Just flash in recovery onto the ROM and you'll have SUMod I hope.
Check OP for link.
Working fine for me.

Ok. I'll test it. Thanks man.

krushhh said:
Ok. I'll test it. Thanks man.
Click to expand...
Click to collapse
No worries. I needed to to it for myself anyways

Bro can you just upload the baseband? Would be really cool
Sent from my D6603 using XDA-Developers mobile app

Dobsgw said:
No worries. I needed to to it for myself anyways
Click to expand...
Click to collapse
The zip doesn't format data, right?

krushhh said:
The zip doesn't format data, right?
Click to expand...
Click to collapse
Nope
Sent from my D6603 using XDA-Developers mobile app

krushhh said:
The zip doesn't format data, right?
Click to expand...
Click to collapse
I'd never mess you up like that don't worry. I inflict all this stuff on my own device before anyone else get's it

dontbelive said:
Bro can you just upload the baseband? Would be really cool
Sent from my D6603 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yeah sure give me a minute

dontbelive said:
Bro can you just upload the baseband? Would be really cool
Sent from my D6603 using XDA-Developers mobile app
Click to expand...
Click to collapse
Okay here is just the baseband files. Not flashable or anything so I won't add to OP so less confusion.
That's what you wanted right?