So, you may have made a bad flash, having trouble to S-OFF or just want to go back to 100% stock ROM and recovery. In that case, the easiest solution is to run your RUU (ROM Update Utility). But unlike the conventional method, this guide is about extracting the rom.zip from your RUU for a faster and more comprehensive installation. The extracted rom.zip will also allow the possibility to decrypt the RUU in order to get access to all the individual files inside the encrypted archive. So, if you want to flash, for example, only the stock recovery, you can do it without having to flash the entire RUU ROM, which will restore the phone's entire software.
Note: Your HTC One can be either S-ON or S-OFF in order to successfully flash RUU rom.zip. But if your device is S-OFF, you do not need to re/lock your bootloader.
Follow the instructions in the given order to avoid any hiccups or possible bricking of your device:
1. You will need to know your HTC One's MID and CID. These codes will allow you to find the required RUU for your phone.
You need adb and fastboot. Go to your Bootloader. Select Fastboot. Connect your HTC One with its original USB cable to your PC. Do:
Code:
fastboot getvar all
and you should see a list of important information about your device. In particular, note the modelid (MID) and cidnum (CID). If you get nothing, there is an issue with the USB connection between your phone and PC.
2. Find the correct RUU. Here's a thread: http://forum.xda-developers.com/showthread.php?t=2428276 to find the correct RUU from the filename but more importantly, make sure that both the MID and CID match exactly with your device. You also need to pay attention if you need the M7 UL or M7 U version, which is in the filename of the RUU. If you can't find your RUU from that site, just google or search on XDA. However, not all HTC One variants have RUUs. But if you are already S-OFF, you can change your MID and CID, which will allow you to use any RUU: http://forum.xda-developers.com/showthread.php?t=2322820
3. Extract the RUU and grab the rom.zip file. This is the most important file you need from the RUU and afterwards you can delete the RUU exe if you want. To get the rom.zip from your RUU exe file, you just need to run the RUU exe file once, and then when the window is ready and waiting for you to press on the "Next" button, just leave it open and go to your temp folder. I'm using Windows XP SP3 32-bit and my temp folder is located at this path: C:\Documents and Settings\Administrator\Local Settings\Temp
Now, you will see several files and folders. Sort everything in that temp folder based on "Date Modified" with the most recent folder showing up above all other folders. This is the folder you want. The folder name will be bunch of letters and numbers. Inside that folder you will find several files, but what you need is rom.zip and android-info.txt. Copy both these files and paste them somewhere safe on your hard drive. The android-info.txt contains crucial information about the compatibility of that RUU for your phone. Here's the android-info.txt extracted from my RUU exe:
Code:
modelid: PN0711000
cidnum: HTC__001
cidnum: HTC__J15
cidnum: HTC__A48
cidnum: HTC__M27
mainver: 1.29.401.2
btype:1
aareport:1
DelCache:1
hbootpreupdate:3
You can then verify that you have the correct RUU if the modelid matches that of your phone and if you can see your cidnum in that list. If either (or both) of the modelid or cidnum does not match that of your phone, the RUU process will fail. The mainver is the firmware that is going to be flashed onto your phone.
For easy reference, create a new folder and name it exactly like the RUU exe file and put the rom.zip and android-info.txt in there so you won't have trouble identifying that rom.zip file later if you need to flash it again. Now, you can close the RUU installation window and all the files in that temp folder containing rom.zip will be instantly erased. Note that if you open the rom.zip with Winzip/Winrar, you will see a list of all the files but if you try to extract or double-click to open any of these files, you will get an error saying that the file is corrupt. This warning is only due to the files being encrypted by HTC, since the RUU is an official release and is digitally signed. To access those encrypted files, you will need to decrypt them on Linux.
4. Go to your bootloader. Do:
Code:
fastboot oem rebootRUU
This will reboot your HTC One and you will see a black screen with a silver HTC logo.
Now, you will need to access the rom.zip file and flash it. I have copied my rom.zip to my adb folder located at: C:/mini-sdk/rom.zip
So, i type:
Code:
fastboot flash zip C:/mini-sdk/rom.zip
Don't touch anything during the flash process. It will start and after some time, you will see FAILED error. Don't worry, it's the file preparation process if you have firmware higher than that of the RUU. Just do the same command again and the flash process will complete successfully this time. Look at the Command Prompt to know when the flash is complete. At the same time if you look at your phone, you will notice a green progress bar. When the flashing is complete on the Command Prompt, you will notice that the green bar is stuck at about 95%. This is normal. It's just a bug in the progress bar - what matters is the output from the Command Prompt window.
5. Then, you reboot. Do:
Code:
fastboot reboot
This will restart your phone. Let it boot up. It might take a little longer for the first boot up sequence. You will then have completely stock software (firmware & ROM). Go to your bootloader and check. Your S-ON/OFF and Bootloader lock/unlock are unchanged from before the RUU rom.zip flashing procedure. You can now also receive OTA updates.
I hope this has been helpful. Just press the THANKS button! :good:
If you're S-OFF you do NOT need to relock the bootloader to flash an RUU - just putting that out there
Opening android-Info.txt
Hey man,
as first thanks a lot, i got it all thanks to you but i'm still having trouble finding the right RUU.
I know you said that opening android-info.txt would help, and that it wont work with WinRar.. which i can see.
I have downloaded the .zip RUU, so.. my question is how do i open this txt file if not without WinRar.
Thanks again
emir1396 said:
Hey man,
as first thanks a lot, i got it all thanks to you but i'm still having trouble finding the right RUU.
I know you said that opening android-info.txt would help, and that it wont work with WinRar.. which i can see.
I have downloaded the .zip RUU, so.. my question is how do i open this txt file if not without WinRar.
Thanks again
Click to expand...
Click to collapse
You don't know how to open a .txt extension file? :cyclops:
Just use any text viewer/editor. I use Notepad++ and you can download it here: http://notepad-plus-plus.org/
Hi I need help!
i do all the steps and i have this massage:" failed remote:24 persing android info fail"
---------- Post added at 08:00 PM ---------- Previous post was at 08:00 PM ----------
Hi I need help!
i do all the steps and i have this massage:" failed remote:24 persing android info fail"
italgal said:
Hi I need help!
i do all the steps and i have this massage:" failed remote:24 persing android info fail"
Click to expand...
Click to collapse
Where do you get this error? At which step? Please provide more information to help resolve your problem.
i try to install many ruu i need ruu 4A.17.3250.14
thanks I will try this method in future.:good::good::good:
i have those
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.9
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA38XW900273
(bootloader) imei: 354435053862991
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__K18
(bootloader) battery-status: good
(bootloader) battery-voltage: 4192mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.046s
italgal said:
i have those
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.9
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA38XW900273
(bootloader) imei: 354435053862991
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__K18
(bootloader) battery-status: good
(bootloader) battery-voltage: 4192mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.046s
Click to expand...
Click to collapse
4A.17.3250.14 is baseband version
you need to search for an RUU based on cidnum and model id
judging from your cid .. "HTC_K18" ..its kinda rare .. i think your cid belongs to Israel and to my knowledge there is no RUU for your model
Please Help
Hello dear friend, i am so confused, i changed from apple devices to android, and i still don`t know many things.....
I just need some help, i try to do everything as you wrote and explained but when i get to the
flash zip
Click to expand...
Click to collapse
i get some errors
This is the error:
target reported max download size of 1526722560 bytes
sending 'zip' (671277 KB)...
OKAY [35.288s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 93.188s
This is my information : version: 0.5
version-bootloader: 1.55.0000
version-baseband: 4A.21.3263.04
version-cpld: None
version-microp: None
version-main: 3.62.401.1
version-misc: PVT SHIP S-ON
serialno: FA36RW901770
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__032
battery-status: good
battery-voltage: 3812mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-bb768ae1
hbootpreupdate: 11
gencheckpt: 0
This is the RUU i use : ota_m7_ul_jb43_sense55_mr_htc_europe_3-62-401-1-2-24-401-8_release_338160gxmo5sd9337kadux
Please help, if you cane xplain me what to do....I implore you i wan`t my HTC back to normal
---------- Post added at 10:29 PM ---------- Previous post was at 10:17 PM ----------
Hello dear friend, i am so confused, i changed from apple devices to android, and i still don`t know many things.....
I just need some help, i try to do everything as you wrote and explained but when i get to the
Quote:
flash zip
i get some errors
This is the error:
target reported max download size of 1526722560 bytes
sending 'zip' (671277 KB)...
OKAY [35.288s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 93.188s
This is my information : version: 0.5
version-bootloader: 1.55.0000
version-baseband: 4A.21.3263.04
version-cpld: None
version-microp: None
version-main: 3.62.401.1
version-misc: PVT SHIP S-ON
serialno: FA36RW901770
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__032
battery-status: good
battery-voltage: 3812mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-bb768ae1
hbootpreupdate: 11
gencheckpt: 0
This is the RUU i use : ota_m7_ul_jb43_sense55_mr_htc_europe_3-62-401-1-2-24-401-8_release_338160gxmo5sd9337kadux
Please help, if you cane xplain me what to do....I implore you i wan`t my HTC back to normal
DrDrake23 said:
Hello dear friend, i am so confused, i changed from apple devices to android, and i still don`t know many things.....
I just need some help, i try to do everything as you wrote and explained but when i get to the i get some errors
This is the error:
target reported max download size of 1526722560 bytes
sending 'zip' (671277 KB)...
OKAY [35.288s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 93.188s
This is my information : version: 0.5
version-bootloader: 1.55.0000
version-baseband: 4A.21.3263.04
version-cpld: None
version-microp: None
version-main: 3.62.401.1
version-misc: PVT SHIP S-ON
serialno: FA36RW901770
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__032
battery-status: good
battery-voltage: 3812mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-bb768ae1
hbootpreupdate: 11
gencheckpt: 0
This is the RUU i use : ota_m7_ul_jb43_sense55_mr_htc_europe_3-62-401-1-2-24-401-8_release_338160gxmo5sd9337kadux
Please help, if you cane xplain me what to do....I implore you i wan`t my HTC back to normal
---------- Post added at 10:29 PM ---------- Previous post was at 10:17 PM ----------
Hello dear friend, i am so confused, i changed from apple devices to android, and i still don`t know many things.....
I just need some help, i try to do everything as you wrote and explained but when i get to the
Quote:
flash zip
i get some errors
This is the error:
target reported max download size of 1526722560 bytes
sending 'zip' (671277 KB)...
OKAY [35.288s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 93.188s
This is my information : version: 0.5
version-bootloader: 1.55.0000
version-baseband: 4A.21.3263.04
version-cpld: None
version-microp: None
version-main: 3.62.401.1
version-misc: PVT SHIP S-ON
serialno: FA36RW901770
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__032
battery-status: good
battery-voltage: 3812mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-bb768ae1
hbootpreupdate: 11
gencheckpt: 0
This is the RUU i use : ota_m7_ul_jb43_sense55_mr_htc_europe_3-62-401-1-2-24-401-8_release_338160gxmo5sd9337kadux
Please help, if you cane xplain me what to do....I implore you i wan`t my HTC back to normal
Click to expand...
Click to collapse
When you get the failed message, run the flash zip command again.
Sent from my Nexus 4 using Tapatalk 2
fridgeman said:
When you get the failed message, run the flash zip command again.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Lol that's not what that error is. That's a signature verify fail and I'm pretty sure that means they're trying to flash an unsigned file or a file for another CID on a phone with security on.
Didn`t work
fridgeman said:
When you get the failed message, run the flash zip command again.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
I did it still the same thing
---------- Post added at 03:33 PM ---------- Previous post was at 03:18 PM ----------
xcesivemastub8ah said:
Lol that's not what that error is. That's a signature verify fail and I'm pretty sure that means they're trying to flash an unsigned file or a file for another CID on a phone with security on.
Click to expand...
Click to collapse
Yes i got S-ON please help me what can i do to make it work
Iam using mac, can i use this steps or not? I have sucseed to unlock my htc one S-on but when i try to do recovery the mobile stucks every time ,
@DrDrake23
To find the correct RUU compatible with your HTC One, you need to look at these information:
modelid: PN0710000
cidnum: HTC__032
Then search for the RUU. I was able to find 2 versions at this location: http://www.htc1guru.com/downloads/ruu-file-downloads/
Also, according to this list: http://forum.xda-developers.com/showthread.php?t=2445289 your CID matches the region HTC-EastEurope HTC__032
These 2 RUU's should work for your device. You need to use only one of these.
RUU M7 UL JB 50 HTC Europe 1.20.401.1 Radio 4A.13.3227.06 10.27.1127.01 Release 308001 Signed 2 4
or
RUU M7 UL JB 50 HTC Europe 1.28.401.7 Radio 4A.13.3231.27 10.31.1131.05 Release 310878 Signed
It is usually recommended to use the most recent RUU. In this case, you should first try the 1.28.401.7 RUU.
However, read the description in the comment section on the site for each of these RUU's.
From your phone information:
version-main: 3.62.401.1
This means that you will need to S-OFF first before you are able to run the RUU since your main version is higher than both of these RUU's.
On another note, you should always read up and do enough research before attempting to modify your phone. Do you really need to go back to 100% stock? You could simply flash a stock ROM or even better, a custom ROM. But if you believe you need to return your device to 100% stock condition, start here: http://forum.xda-developers.com/showthread.php?t=2488772 and then you can flash hboot 1.44 and finally run the RUU.
marjanna said:
Iam using mac, can i use this steps or not? I have sucseed to unlock my htc one S-on but when i try to do recovery the mobile stucks every time ,
Click to expand...
Click to collapse
I tested the entire procedure successfully on my Windows XP SP3 32-bit. So, i cannot say if this would work on another OS or if the commands would be the same for that matter. Maybe someone with a Mac can confirm and help you out.
electronical said:
I tested the entire procedure successfully on my Windows XP SP3 32-bit. So, i cannot say if this would work on another OS or if the commands would be the same for that matter. Maybe someone with a Mac can confirm and help you out.
Click to expand...
Click to collapse
Ok i see. It seems that most use pc:s , i have tryied and still trying to find a Mac user , but no luck so far,
I got a 4.2.2 HTC One
HTC Sense Version 5.0
S-On
Unlocked
Tampered
I have heard that its better and safer to change the S-On to S-Off but no luck yet. this guide looks great but i might wait to be secure so i dont brick the phone trying to.
Take care and thanks for replying ..
:laugh::good::laugh::good::laugh:
This process saved me.
I had a bad flash and could not get adb to recognize my device.
Just a quick note, bootlocker must be re-locked if you on S-on.
Thanks for the help man!
DrDrake23 said:
I did it still the same thing
Yes i got S-ON please help me what can i do to make it work
Click to expand...
Click to collapse
If u are s-on you have to re-lock the bootloader...
Related
Hi all,
I've created a simple guide to restore your HTC One M8 back to stock firmware while still being on S-ON.
This guide will provide you with all the files required to restore your EUROPEAN device back to stock.
If you have an device from another region, you'll need to find the RUU & recovery image yourself. (see below)
Prerequisites:
- HTC Drivers (just install HTC Sync and the included drivers, then remove HTC Sync)
- Fastboot package
- Stock recovery.img (you'll need the recovery.img with the same fw version as the RUU you're going to flash) (Link to 4.16.401.10 recovery.img for European non-carier devices)
- The RUU for your region/carrier. (Link to 4.16.401.10 for European non-carier devices)
If you have an USA /USA carrier device, go here for the RUU files
If you have an device from another region than Europe or USA, good luck finding the correct RUU
Look here to find recovery.img files for all regions (thanks to @exocetdj)
Because this guide is intended for S-ON, only the RUU for your region/carrier will work.
If you don't have an RUU or cannot find one for your region/carrier, S-OFF your device and follow this guide to restore your HTC One M8 back to stock. (thanks to @EddyOS)
After you've gone trough all steps;
- The red text during boot will be gone
- You'll have the stock firmware, system, recovery and boot.img
- Your bootloader will say "Relocked"
- Your bootloader will say "Software status: Official"
Let's start:
Step 1:
Start the RUU exe by double clicking on it, it will take a few seconds before it starts. After it has started, do not continue but go to your temp folder (type %TEMP% in your address bar)
Find the folder with the temporary files from the RUU (mine was called: {C48DBAA3-1CC0-4DF6-B069-B9CCB27F93C9})
Inside this folder there should be a few files and another folder with a long code as name (mine was called: {50F2F878-636A-496F-A7CB-544C067E0C4B})
Inside this folder, scroll down until you find rom.zip, open this file
Extract boot_signed.img and place it in a folder with the downloaded stock recovery and the fastboot.exe file
Now close the RUU installation wizard
Step 2:
Turn off your device
Hold VOL-Down + Power, after a few seconds you'll be in the bootloader. Now release the buttons
Navigate with the volume buttons to fastboot and confirm with the power button.
Step 3:
You should now have a folder with the following files:
- fastboot.exe
- AdbWinApi.dll
- AdbWinUsbApi.dll
- boot.img (extracted from the rom.zip)
- recovery.img (see prerequisites)
Inside the folder while holding shift, click right mouse and choose Open command window here
Before starting, it's recommended to rename the recovery file to recovery.img and the kernel to boot.img
Type the following commands in order (make sure to check the output and see if every command is successful before executing the next command)
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot oem lock
This will push the stock kernel & recovery and relock your device.
Step 4:
Open the RUU installation wizard again and follow the instructions.
It will start flashing the RUU on your device.
After 8-12 minutes, the installation will be complete and your device will boot into system.
Step 5: (optional)
Power off your device
Hold VOL-Down + Power, after a few seconds you'll be in the bootloader. Now release the buttons
Verify that your bootloader says "Relocked" & "Software status: Official"
Congratulations, your device is back to stock again. After it's finished booting and optimizing 261(!) pre installed apps, you'll be greeted by the setup wizard on your phone.
If you have any questions, let me know.
Common problems:
Fastboot cannot find my device?
- try reinstalling the HTC drivers included with HTC Sync, and make sure to remove HTC Sync afterwards but leaving the drivers installed
I've got error 155 when trying to flash the RUU
- make sure your bootloader is locked. This tool only works when you have stock kernel, recovery and your bootloader is locked or relocked.
Reserved
TAMPERED
UNLOCK
M8_UL PVT SHIP S-ON
HBOOT- 3.16.0.0000
RADIO-1.16.2133156.UA15g
OpenDSP-v38.2.2-00542-m8974.0311
OS-1.54.401.10
eMMC-boot 2048MB
ــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
This is my phone , should i do any thing more or just the steps u mentioned???
I was told that i must upgrade my firmware, must i ??
Thanks
This is a great guide for those that just want to return to stock for their own purposes. However, this will not be enough for sending the phone into warranty, for that you'll need to take a few more steps with S-Off to get that RELOCKED flag to say LOCKED.
dima470 said:
This is a great guide for those that just want to return to stock for their own purposes. However, this will not be enough for sending the phone into warranty, for that you'll need to take a few more steps with S-Off to get that RELOCKED flag to say LOCKED.
Click to expand...
Click to collapse
From my experience with HTC warranty repairs, they don't really care about the bootloader being 'relocked', S-Off is a more common cause for them to not repair the device.
But, above differs per repair center / per country
al_wizard said:
TAMPERED
UNLOCK
M8_UL PVT SHIP S-ON
HBOOT- 3.16.0.0000
RADIO-1.16.2133156.UA15g
OpenDSP-v38.2.2-00542-m8974.0311
OS-1.54.401.10
eMMC-boot 2048MB
ــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
This is my phone , should i do any thing more or just the steps u mentioned???
I was told that i must upgrade my firmware, must i ??
Thanks
Click to expand...
Click to collapse
Where did you bought your device?
al_wizard said:
TAMPERED
UNLOCK
M8_UL PVT SHIP S-ON
HBOOT- 3.16.0.0000
RADIO-1.16.2133156.UA15g
OpenDSP-v38.2.2-00542-m8974.0311
OS-1.54.401.10
eMMC-boot 2048MB
ــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
This is my phone , should i do any thing more or just the steps u mentioned???
I was told that i must upgrade my firmware, must i ??
Thanks
Click to expand...
Click to collapse
You are S-ON so you need to relock the bootloader and run the ruu.
If you want to give all info to work with you need to post the outcome of :
Fastboot getvar all
Delete the serial and imei and post the list here.
Or check the firmware & nand backup thread here in the general section. Restore the stock rom and recovery and perform ota updates which also will upgrade the firmware
---------- Post added at 07:45 PM ---------- Previous post was at 07:43 PM ----------
Joery360 said:
From my experience with HTC warranty repairs, they don't really care about the bootloader being 'relocked', S-Off is a more common cause for them to not repair the device.
But, above differs per repair center / per country
Where did you bought your device?
Click to expand...
Click to collapse
Has nothing to do with where he bought it from, it is depending on the phones hardware & software, for all we know its imported.
The specs are important not where he got it from. And you can't tie it down on how repair centers handle the phones....that's a matter of good luck !
Joery360 said:
Where did you bought your device?
Click to expand...
Click to collapse
I bought it second-hand from Qatar if you mean country.
Hi. I tried to use this guide but it I couldn't follow it through. I have relocked, tempered, S-ON, CID : TMOB102 phone. It is stuck in the HTC logo after a full wipe from twrp. I don't have OS, and the main version is empty. So far I have tried all the European RUU which gave CID error and 2 T-Mobile RUU's with MID error both. Can anyone give me a suggestion?
Problem extracting boot_signed.img
When I try to extract the boot_signed.img akk I get from Winzip is "cant find central directory"
Any ideas??
This is a great guide for those that just want to return to stock for their own purposes.
Hi,
I just needs to get OTA on my phone and i dont mind it being tampered or unlocked.
Will this method work on my phone ?
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.2133156.UA15G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH495WM01309
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 098a72e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
:/
I tried to flash the boot.img but I get this error:
C:\Users\Ali\Desktop\Fastboot>fastboot boot boot.img
creating boot image...
creating boot image - 8994816 bytes
downloading 'boot.img'...
OKAY [ 0.894s]
booting...
FAILED (remote: not allowed)
finished. total time: 0.895s
I have no OS now if I try to reboot I get stuck on boot logo. What can I do to get back to stock with OTA and everything?
C:\Users\Ali\Desktop\Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.61.9
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: ORANG001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 4c3fbd70
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.020s
thanks this helped me revive my m8
Pc can't identify my device. phone gets htc logo then it turns black and disconnects from pc. RUU wiz error (170) usb connection error.
royalkalana said:
Hi,
I just needs to get OTA on my phone and i dont mind it being tampered or unlocked.
Will this method work on my phone ?.....
Click to expand...
Click to collapse
Yes
gorner92 said:
I tried to flash the boot.img but I get this error:
C:\Users\Ali\Desktop\Fastboot>fastboot boot boot.img
creating boot image...
creating boot image - 8994816 bytes
downloading 'boot.img'...
OKAY [ 0.894s]
booting..
Click to expand...
Click to collapse
Please check if your device is unlocked. You can't flash boot.img's while on a locked bootloader.
Cpre said:
Pc can't identify my device. phone gets htc logo then it turns black and disconnects from pc. RUU wiz error (170) usb connection error.
Click to expand...
Click to collapse
Reinstall the HTC drivers.
gorner92 said:
I tried to flash the boot.img but I get this error:
C:\Users\Ali\Desktop\Fastboot>fastboot boot boot.img
creating boot image...
creating boot image - 8994816 bytes
downloading 'boot.img'...
OKAY [ 0.894s]
booting...
FAILED (remote: not allowed)
finished. total time: 0.895s
I have no OS now if I try to reboot I get stuck on boot logo. What can I do to get back to stock with OTA and everything?
C:\Users\Ali\Desktop\Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.61.9
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: ORANG001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 4c3fbd70
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.020s
Click to expand...
Click to collapse
You are using the wrong command ! It's :
Fastboot flash boot boot.img
NOT
Fastboot boot boot.img ! That's why you got stuck. And indeed make sure the bootloader is UNLOCKED before you flash !
While i don't even know flashing the boot.img and recovery seperatly first is actually needed because all that's needed is to relock the bootloader and run the ruu.exe or the temp rom.zip via sd card.
afaik the ruu method takes care of the boot.img and recovery on its own.
Got a problem with 3rd command (locking oem) in step 3. It goes like this:
C:\adb>fastboot flash boot boot.img
target reported max download size of 1826021376 bytes
sending 'boot' (8780 KB)...
OKAY [ 1.001s]
writing 'boot'...
OKAY [ 0.464s]
finished. total time: 1.465s
C:\adb>fastboot flash recovery recovery.img
target reported max download size of 1826021376 bytes
sending 'recovery' (16044 KB)...
OKAY [ 1.710s]
writing 'recovery'...
OKAY [ 0.646s]
finished. total time: 2.357s
C:\adb>fastboot oem lock
...
(bootloader) [PGFS] partition_update_pgfs: pg1fs_security
(bootloader) TZ_HTC_SVC_ENC ret = 0
(bootloader) [PGFS] partition_update_pgfs: pg2fs_sec_recovery
(bootloader) Lock successfully...
(bootloader) deinit_lcd
(bootloader) mipi display off
(bootloader) mdp_clock_off
(bootloader) turn off fd8c2308 failed 1 times. Try again...
(bootloader) disable_mmss_clk done
(bootloader) pll1_disable done
(bootloader) TZ_HTC_SVC_DISABLE ret = -1610744452 (0x9FFDFD7C)
(bootloader) [CRITICAL] SPMI write command failure: cmd_id = 0, error
(bootloader) = 4
(bootloader) [CRITICAL] SPMI write command failure: cmd_id = 0, error
(bootloader) = 4
(bootloader) [INFO] Rebooting device
FAILED (status read failed (Too many links))
finished. total time: 1.194s
My getvar all before flashing:
version: 0.5
version-bootloader: 3.19.0.0000
version-baseband: 1.22.21331147A1.29G
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
meid: 0000000000000000
product: m8_ul
platform: hTCBmsm8974
modelid: 0P6B10000
cindum: HTC__032
Now my phone is stuck on my ROM's boot logo and now I can't access bootloader.
EDIT:
I've managed to access bootloader by holding power + volup and then holding vol down. After that installing via RUU went smooth.
Hi, I followed your instructions, but before I could start with 4th device booted up and i accidentaly accepted upgrade. It rebooted and upgraded the device, and then stuck on boot screen. Now I try to update it through RUU but it says image version 4.16.401.13, and I can't find RUU for that version. Any ideas? Can I somehow reinstall twrp and restore nandroid backup?
P.S. in bootloader it still says software status: modified :/
P.P.S. I still managed to make RUU go through all the steps, from a billionth time. It would usually stuck on steps 0, step 1, or step 3. Now it seems like it's booting fine... Time to shower away all the cold sweat from my body.
Hi Guys,
I have windows 8.1 and can't open rom.zip file. I have an error : The compressed Folder is invalid. Installed winzip, 7-zip - can't go ahead.
If you are having trouble sending the ruu and you are stuck at sending 0/7 or 1/8 and only htc logo. then just delete htc sync manager from your pc!!!
Probably not all have noticed the last Marshmallow 6.0 update 6.12.401.4 for the HTC M8 European edition. Greets to the uploader.
Here it is:
http://forum.xda-developers.com/htc-one-m8/development/progress-fuu-m8-t2813792
To be clear, this is just (leaked) firmware.zip, not the ROM.
Folks seem trigger-happy to make threads about the 401 update, when there isn't one yet?
---------- Post added at 12:31 PM ---------- Previous post was at 11:32 AM ----------
Stock flashable ROM is here: http://forum.xda-developers.com/htc-one-m8/development/rom-sense-6-12-401-4-mra58k-stock-t3296066
There is also apparently a (leaked?) RUU around somewhere?
Is this the RUU?
0P6BIMG_M8_UL_M60_SENSE70_MR_HTC_Europe_6.12.401.4_Radio_1.29.214500021.12G_20.72.4196t.01_release_464360_signed.zip
https://www.androidfilehost.com/?fid=24369303960687057
David_UK said:
Is this the RUU?
0P6BIMG_M8_UL_M60_SENSE70_MR_HTC_Europe_6.12.401.4_Radio_1.29.214500021.12G_20.72.4196t.01_release_464360_signed.zip
https://www.androidfilehost.com/?fid=24369303960687057
Click to expand...
Click to collapse
looks like it. flashing in 5, 4, 3,...
kukubau said:
looks like it. flashing in 5, 4, 3,...
Click to expand...
Click to collapse
How to flash? Rename to 0P6BIMG.zip and flashing with hboot?
forgiveMySin said:
How to flash? Rename to 0P6BIMG.zip and flashing with hboot?
Click to expand...
Click to collapse
I don't know if you need to rename it to 0P6BIMG.zip. I have S-OFF and the bootloader unlocked and I hadn't to.
Download htc_fastboot.exe from somewhere or get it from inside any RUU exe after the files were unpacked and the wizard has started.
1. Boot into bootloader
2. type with the phone connected at your computer:
Code:
fastboot oem rebootRUU
3.
Code:
htc_fastboot flash zip <path to the rom.zip file>/rom.zip
, named accordingly
wait...
done
David_UK said:
Is this the RUU?
0P6BIMG_M8_UL_M60_SENSE70_MR_HTC_Europe_6.12.401.4_Radio_1.29.214500021.12G_20.72.4196t.01_release_464360_signed.zip
https://www.androidfilehost.com/?fid=24369303960687057
Click to expand...
Click to collapse
Flashed, it works great. Thanks!
When I tried to flash it says:
Target reported max download size of 1826152448 bytes
Error: cannot load c:\adb\0P6BIMG.zip
I have tried to download again, but it stil gives me the same error.
target reported max download size of 1826418688 bytes
sending 'zip' (1687272 KB)...
OKAY [ 64.343s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 126.091s
OTA over wifi failed. This one also (maybe because of relocked bootloader?)
No I get FAILED (remote: 32 header error)
kukubau said:
I don't know if you need to rename it to 0P6BIMG.zip. I have S-OFF and the bootloader unlocked and I hadn't to.
Download htc_fastboot.exe from somewhere or get it from inside any RUU exe after the files were unpacked and the wizard has started.
1. Boot into bootloader
2. type with the phone connected at your computer:
Code:
fastboot oem rebootRUU
3.
Code:
htc_fastboot flash zip <path to the rom.zip file>/rom.zip
, named accordingly
wait...
done
Click to expand...
Click to collapse
so, if i have an unlocked bootloader and s-off can i follow your procedure ?
Here it is ...
All official ...
Majland said:
When I tried to flash it says:
Target reported max download size of 1826152448 bytes
Error: cannot load c:\adb\0P6BIMG.zip
I have tried to download again, but it stil gives me the same error.
Click to expand...
Click to collapse
I downloaded 3 times and still get corrupt file.... MD5 is ok though...
Now Im trying to restore to go via OTA....
David_UK said:
Is this the RUU?
0P6BIMG_M8_UL_M60_SENSE70_MR_HTC_Europe_6.12.401.4_Radio_1.29.214500021.12G_20.72.4196t.01_release_464360_signed.zip
https://www.androidfilehost.com/?fid=24369303960687057
Click to expand...
Click to collapse
Thank you very mych for the link!!!
HTC OTA update fu*k up my phone (my phone is untouched - not rooted moded and so - unlocked version). Update process stop unexpectedly (not able to mount SDCARD or something like that ) and my phone was unusable - unable to start android and goes automatically to recovery. I had to preform manual upgrade with RUU from the link. The only drawback is that the update wipe all my phone including internal memory and I lost all my pictures (not big deal of price of bricked phone). The HTC backup restore almost everything and now phone working like charm.
I cant find any normal, human language tutorial, to fix this **** up without s-off. My htc was rooted, I flashed su... Now I'm on stock recovery. Only this is my prob:
fakitol said:
target reported max download size of 1826418688 bytes
sending 'zip' (1687272 KB)...
OKAY [ 64.343s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 126.091s
OTA over wifi failed. This one also (maybe because of relocked bootloader?)
No I get FAILED (remote: 32 header error)
Click to expand...
Click to collapse
I have exactly the same problem
I downloaded the file:
0P6BIMG_M8_UL_M60_SENSE70_MR_HTC_Europe_6.12.401.4_Radio_1.29.214500021.12G_20.72.4196t.01_release_464360_signed.zip
from:
androidfilehost fid=24369303960686952 (I can't post the link because I'm a forum baby...)
md5 compare downloaded file and website is same (good download) - 469c3b8504ce2a2c8aae0fde17bfe028
Did anyone have success with the above file?
C:\adb>fastboot flash zip 0P6BIMG.zip
target reported max download size of 1826418688 bytes
sending 'zip' (1687272 KB)...
OKAY [ 65.280s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 126.942s
---------- Post added at 04:22 PM ---------- Previous post was at 04:13 PM ----------
Pepaaa said:
I have exactly the same problem
I downloaded the file:
0P6BIMG_M8_UL_M60_SENSE70_MR_HTC_Europe_6.12.401.4_Radio_1.29.214500021.12G_20.72.4196t.01_release_464360_signed.zip
from:
androidfilehost fid=24369303960686952 (I can't post the link because I'm a forum baby...)
md5 compare downloaded file and website is same (good download) - 469c3b8504ce2a2c8aae0fde17bfe028
Did anyone have success with the above file?
C:\adb>fastboot flash zip 0P6BIMG.zip
target reported max download size of 1826418688 bytes
sending 'zip' (1687272 KB)...
OKAY [ 65.280s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 126.942s
Click to expand...
Click to collapse
Just found that this ZIP method will most likely not work if your phone is S-ON
Then my phone can't be revived without the original RUU.EXE or "unmodified" RUU.ZIP method.
Any ideas? Please share...
When I read my phone info, I get this:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA45*********
(bootloader) imei: <hidden>
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Pepaaa said:
I have exactly the same problem
I downloaded the file:
0P6BIMG_M8_UL_M60_SENSE70_MR_HTC_Europe_6.12.401.4_Radio_1.29.214500021.12G_20.72.4196t.01_release_464360_signed.zip
from:
androidfilehost fid=24369303960686952 (I can't post the link because I'm a forum baby...)
md5 compare downloaded file and website is same (good download) - 469c3b8504ce2a2c8aae0fde17bfe028
Did anyone have success with the above file?
C:\adb>fastboot flash zip 0P6BIMG.zip
target reported max download size of 1826418688 bytes
sending 'zip' (1687272 KB)...
OKAY [ 65.280s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 126.942s
---------- Post added at 04:22 PM ---------- Previous post was at 04:13 PM ----------
Just found that this ZIP method will most likely not work if your phone is S-ON
Then my phone can't be revived without the original RUU.EXE or "unmodified" RUU.ZIP method.
Any ideas? Please share...
When I read my phone info, I get this:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA45*********
(bootloader) imei: <hidden>
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
error 12 is when bootloader is locked.
Pepaaa said:
I have exactly the same problem
I downloaded the file:
0P6BIMG_M8_UL_M60_SENSE70_MR_HTC_Europe_6.12.401.4_Radio_1.29.214500021.12G_20.72.4196t.01_release_464360_signed.zip
from:
androidfilehost fid=24369303960686952 (I can't post the link because I'm a forum baby...)
md5 compare downloaded file and website is same (good download) - 469c3b8504ce2a2c8aae0fde17bfe028
Did anyone have success with the above file?
C:\adb>fastboot flash zip 0P6BIMG.zip
target reported max download size of 1826418688 bytes
sending 'zip' (1687272 KB)...
OKAY [ 65.280s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 126.942s
Click to expand...
Click to collapse
You don't read properly what is written on post #6
You need htc_fastboot.exe to flash the RUU zip. Normal/google fastboot.exe won't work.
Also S-On device must relock bootloader.
htc_fastboot.exe - https://drive.google.com/file/d/0B8L4pkbzdlR3eTlJSjdKVEdHX1U/view
For S-On
fastboot oem lock (to relock bootloader)
fastboot reboot-bootloader (reboot to bootloader after relock)
fastboot oem rebootRUU (put the device in RUU mode)
htc_fastboot flash zip RUU.zip (to install RUU)
For S-Off
fastboot oem rebootRUU (put the device in RUU mode)
htc_fastboot flash zip RUU.zip (to install RUU)
---------- Post added at 03:58 PM ---------- Previous post was at 03:35 PM ----------
fakitol said:
I cant find any normal, human language tutorial, to fix this **** up without s-off. My htc was rooted, I flashed su... Now I'm on stock recovery. Only this is my prob:
Click to expand...
Click to collapse
You can't OTA on a rooted device.
You can get the non-rooted 4.16.401.13 backup from my thread linked in my signature
then try restore system partition only then redo OTA process again and see how it goes.
restore system partition only will keep your data intact.
If this fails, then you need to restore all boot, data, system.
ckpv5 said:
You don't read properly what is written on post #6
You need htc_fastboot.exe to flash the RUU zip. Normal/google fastboot.exe won't work.
Also S-On device must relock bootloader.
htc_fastboot.exe -
For S-On
fastboot oem lock (to relock bootloader)
fastboot reboot-bootloader (reboot to bootloader after relock)
fastboot oem rebootRUU (put the device in RUU mode)
htc_fastboot flash zip RUU.zip (to install RUU)
For S-Off
fastboot oem rebootRUU (put the device in RUU mode)
htc_fastboot flash zip RUU.zip (to install RUU)
Click to expand...
Click to collapse
You rock! RUU has started now using htc_fastboot and I have some progress
It says it's completed successfully:
"OKAY
Flash Zip Complete
Execution time is 349(s)"
And I/m back on the command line.
Now I have black screen with silver htc logo and full green progress bar (indicating 100% - but not percentage is shown, just full)
Do I need to reboot the phone manually or just wait?
Pepaaa said:
You rock! RUU has started now using htc_fastboot and I have some progress
It says it's completed successfully:
"OKAY
Flash Zip Complete
Execution time is 349(s)"
And I/m back on the command line.
Now I have black screen with silver htc logo and full green progress bar (indicating 100% - but not percentage is shown, just full)
Do I need to reboot the phone manually or just wait?
Click to expand...
Click to collapse
Once it is completed, you run fastboot reboot-bootloader and check your bootloader is correct with new info then you can reboot for the rest of the process. (or you can simply reboot - fastboot reboot)
lorezz said:
so, if i have an unlocked bootloader and s-off can i follow your procedure ?
Click to expand...
Click to collapse
yes.
hey guys i have a htc one m9+
cid:htc__038
i accidentally deleted my os and i have twrp running in it.
i tried returning to stock buy download the RUU from the method stated below but could not succeed can anyone please help cause i have invested a lot and bought this phone.....
0PK7IMG_HIAU_ML_TUHL_L50_SENSE70_HTCCN_CHS_2_1.08. 1405.5_Radio_1.1506V24P14.1605.0421_HT[W.T]_release_430624_signed.zip
1.79 GB https://mega.nz/#!MEVWDS6a!K_LTgIXX4...oJVJo2hwju71SI
0PK7IMG_HIAU_ML_TUHL_L50_SENSE70_hTC_Asia_WWE_1.08 .707.4_Radio_1.1506V24P14.1605.0421_HT[W.T]_release_430419_signed.zip
2.10 GB https://mega.nz/#!FFslyDzD!8INOzNsGk...q0z93JP_GNTBqU
0PK7IMG_HIAU_ML_TUHL_L50_SENSE70_hTC_Asia_TW_1.08. 709.4_Radio_1.1506V24P14.1605.0421_HT[W.T]_release_430417_signed.zip
2.25 GB https://mega.nz/#!xNN1nTiS!yS6U9RQOk...VsDp23NwfUWzQ8
0PK7IMG_HIAU_ML_TUHL_L50_SENSE70_HTC_Europe_1.08.4 01.6_Radio_1.1506V24P14.1605.0421_HT[W.T]_release_431201_signed.zip
2.09 GB https://mega.nz/#!IRtz1A6b!EFsQgQyZ8...8K-pI2grk8hrwg
MD5s:
7a2e7e2e973f3209eaeff1db96bed859 *0PK7IMG_HIAU_ML_TUHL_L50_SENSE70_hTC_Asia_TW_1.08 .709.4_Radio_1.1506V24P14.1605.0421_HT[W.T]_release_430417_signed.zip
e28e0736489da46fee6e0ae72aff8471 *0PK7IMG_HIAU_ML_TUHL_L50_SENSE70_HTCCN_CHS_2_1.08 .1405.5_Radio_1.1506V24P14.1605.0421_HT[W.T]_release_430624_signed.zip
ed8436646f3dc4542f3b2036300d6e2d *0PK7IMG_HIAU_ML_TUHL_L50_SENSE70_hTC_Asia_WWE_1.0 8.707.4_Radio_1.1506V24P14.1605.0421_HT[W.T]_release_430419_signed.zip
8fa1b59afcd28f2e229728306aba3c6a *0PK7IMG_HIAU_ML_TUHL_L50_SENSE70_HTC_Europe_1.08. 401.6_Radio_1.1506V24P14.1605.0421_HT[W.T]_release_431201_signed.zip
To flash this on S-On, you must have your device Relocked (on S-Off you don't need to relock) and then in fastboot mode:
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip
fastboot reboot
Please be aware that you'll lose all data doing this.
If you're S-On you can only flash the zip that is for you CarrierID (CID). With superCID or modified CID value through S-OFF you can try to flash other regions RUUs.
DISCLAIMER:
All responsibility and risk you take on yourself downloading and using these in any way. Be sure to know what you do!
Read about similar topic here: http://forum.xda-developers.com/show....php?t=2251800
Which version of your M9+?
cid:htc__038 --> Indian version ,you should download *hTC_Asia_WWE_1.08 .707.4* ...
In download mode, check your version first.
> fastboot getvar all
If you are s-off,you could flash the ROM.zip.
But if you are S-ON, your version should not be newer than 1.08.707.* .
Can u help me i need step by step tutorial for returning to stock so that i can update to MM rom.
now i am on Clean Slate 1.2.3
my status.
software status Modified
Unlocked
HTC HIAU ML 128 SHIP S-ON
CID-HTC 031
LK-1.01.0000 68332ab2
OS-1.90.401.3
Thanks
Sent from my HTC One M9PLUS using Tapatalk
Since your M9+ is s-on,download the RUU you need.
https://forum.xda-developers.com/one-m9/one-m9-general/europe-1-90-403-1-ruu-t3478310
Here is the step by step tutorial.
https://forum.xda-developers.com/showpost.php?p=61801034&postcount=8
So I have to relock it , put zip on SD card , get to download mode and flash @yvtc75
Sent from my HTC One M9PLUS using Tapatalk
vipi77 said:
So I have to relock it , put zip on SD card , get to download mode and flash @yvtc75
Click to expand...
Click to collapse
Relocked your bootloader. Put the ROM.zip on the same fastboot/ADB directory in your local PC. Connect your device to PC by usb cable and execute these command to flash it.
Ok thanks. does it matter that the phone was Factory unlocked?
Sent from my HTC One M9PLUS using Tapatalk
Please Help Me
My Current VER is As Following(HTC One M9+) On MM
--------------------------------------------------------------------------------------------
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_hiau_ml_tuhl
(bootloader) version: 1.0
(bootloader) imei: ******************
(bootloader) version-main: 2.30.707.1
(bootloader) boot-mode: download
(bootloader) version-baseband: READ version-baseband ERROR
(bootloader) version-bootloader: 1.01.0000
(bootloader) mid: 0PK711000
(bootloader) cid: HTC__038
all:
finished. total time: 0.004s
----------------------------------------------------------------------------------------------------------
If i Flash Following Rom
0PK7IMG_HIAU_ML_TUHL_L50_SENSE70_hTC_Asia_WWE_1.08.707.4_Radio_1.1506V24P14.1605.0421_HT[W.T]_release_430419_signed
Which Contains My CID_038
I wants revert toStock Rom For Some Touch Related Issue
Also In Future I wants to Upgrade To Next Android Os
So Please Tell me is it Ok Or i am Wrong ?
Thanks In Advance...
rKsREDMI1s said:
Please Help Me
My Current VER is As Following(HTC One M9+) On MM
--------------------------------------------------------------------------------------------
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_hiau_ml_tuhl
(bootloader) version: 1.0
(bootloader) imei: ******************
(bootloader) version-main: 2.30.707.1
(bootloader) boot-mode: download
(bootloader) version-baseband: READ version-baseband ERROR
(bootloader) version-bootloader: 1.01.0000
(bootloader) mid: 0PK711000
(bootloader) cid: HTC__038
all:
finished. total time: 0.004s
----------------------------------------------------------------------------------------------------------
If i Flash Following Rom
0PK7IMG_HIAU_ML_TUHL_L50_SENSE70_hTC_Asia_WWE_1.08.707.4_Radio_1.1506V24P14.1605.0421_HT[W.T]_release_430419_signed
Which Contains My CID_038
I wants revert toStock Rom For Some Touch Related Issue
Also In Future I wants to Upgrade To Next Android Os
So Please Tell me is it Ok Or i am Wrong ?
Thanks In Advance...
Click to expand...
Click to collapse
U need s-off for flashing ruu older than ur device's vers
yvtc75 said:
Relocked your bootloader. Put the ROM.zip on the same fastboot/ADB directory in your local PC. Connect your device to PC by usb cable and execute these command to flash it.
Click to expand...
Click to collapse
i can not relock bootloader from fastboot. stuck again
FAILED unkonwn command
what*s next?
T3snake said:
U need s-off for flashing ruu older than ur device's vers
Click to expand...
Click to collapse
Thanks
-----------------------------------------------
There is One Available here
https://forum.xda-developers.com/one-m9/one-m9-general/ruu-m9-hiauml-ruu-collection-t3547166
(Asia WWE:
0PK711000 / HTC__044, HTC__038
0PK7IMG_HIAU_ML_TUHL_M60_SENSE70_MR_hTC_Asia_WWE_2 .30.707.1_Radio_1.1550V70.2501.0304_HT[W.T]_release_487633_signed_2_4.zip)
Can You Please Tell Me
Is this RUU i can apply when My Phone is S On ?
Thanks
rKsREDMI1s said:
Thanks
-----------------------------------------------
There is One Available here
https://forum.xda-developers.com/one-m9/one-m9-general/ruu-m9-hiauml-ruu-collection-t3547166
(Asia WWE:
0PK711000 / HTC__044, HTC__038
0PK7IMG_HIAU_ML_TUHL_M60_SENSE70_MR_hTC_Asia_WWE_2 .30.707.1_Radio_1.1550V70.2501.0304_HT[W.T]_release_487633_signed_2_4.zip)
Can You Please Tell Me
Is this RUU i can apply when My Phone is S On ?
Thanks
Click to expand...
Click to collapse
Damn if i knew earlier i wouldn't have to do s off but i guess nougat will be easy to update since i have soff
Anyway the one you mentioned will work on s-on u just need to relock bootloader to flash it
Thanks...
Now Downloading ....
Will Give Results After flashing .....
failed
target reported max download size of 800000000 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 2481537560 is not a multiple of the block size 4096
sending sparse 'zip' 1/1 (0 KB)...
error: write_sparse_skip_chunk: don't care size 2481537560 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 2481537560 is not a multiple of the block size 4096
OKAY [ 1.016s]
writing 'zip' 1/1...
(bootloader) HOSD CL#821792
(bootloader) ERR lzipv1_init : Cannot read header len bytes
(bootloader) ERR lzipv2_init : Cannot open file /dev/fastboot_download_E
(bootloader) 9E6Cl
FAILED (remote: 99 RU_UNKNOWN_FAIL terrible mishap )
finished. total time: 3.094s
yvtc75 said:
Which version of your M9+?
cid:htc__038 --> Indian version ,you should download *hTC_Asia_WWE_1.08 .707.4* ...
In download mode, check your version first.
> fastboot getvar all
If you are s-off,you could flash the ROM.zip.
But if you are S-ON, your version should not be newer than 1.08.707.* .
Click to expand...
Click to collapse
HI there,finally someone wrote something about the Indian version .I own an HTC One m9plus prime camera edition phone which is the Indian version of m9+.I want to root it but haven't been sure of it since I haven't been able to find the stock ROM for if.it's still on lollipop.and there are some bloatware I want to remove .if I could just find I right and safe way to root it. And also probably upgrade to atleast marshmallow.
Hello,
my M9+ is stuck in a bootloop after i followed this guide to root the device.
I succesfully flashed the "recovery-twrp-2.8.7.0-htc_m9pw-english.img" . After i installed the "BETA-SuperSU-v2.48.zip" from recovery, my phone is stuck in bootloop. Phone model is htc_hiau_ml_tuhl XC S-ON, version 2.30.707.1. Any ideas?
try the new,stable version of supersu.
yvtc75 said:
try the new,stable version of supersu.
Click to expand...
Click to collapse
Thanks for the reply. I managed to make my htc one m9+ working again. Installing the newest SuperSU (2.82) in via TWRP seems to work without errors, but when i power on and check root, it says there is no root and there is nor SuperSU App.
My recovery: recovery-twrp-2.8.7.0-htc_m9pw-english
My software: 2.27.401.1
S-OFF Bootloader unlocked.
(bootloader) kernel: lk
(bootloader) product: htc_hiau_ml_tuhl
(bootloader) version: 1.0
(bootloader) imei: 3574***********
(bootloader) version-main: 2.27.401.1
(bootloader) boot-mode: download
(bootloader) version-baseband: READ version-baseband ERROR
(bootloader) version-bootloader: 1.01.0000
(bootloader) mid: 0PK711000
(bootloader) cid: 11111111
Click to expand...
Click to collapse
Any ideas?
can u mail me recovery. i cant download in site .. plzz . ima stuck at rooting my phone thankyou.
Jaysompura said:
can u mail me recovery. i cant download in site .. plzz . ima stuck at rooting my phone thankyou.
Click to expand...
Click to collapse
Here you go.
DarthLuda said:
Hello,
my M9+ is stuck in a bootloop after i followed this guide to root the device.
I succesfully flashed the "recovery-twrp-2.8.7.0-htc_m9pw-english.img" . After i installed the "BETA-SuperSU-v2.48.zip" from recovery, my phone is stuck in bootloop. Phone model is htc_hiau_ml_tuhl XC S-ON, version 2.30.707.1. Any ideas?
Click to expand...
Click to collapse
DarthLuda said:
Thanks for the reply. I managed to make my htc one m9+ working again. Installing the newest SuperSU (2.82) in via TWRP seems to work without errors, but when i power on and check root, it says there is no root and there is nor SuperSU App.
My recovery: recovery-twrp-2.8.7.0-htc_m9pw-english
My software: 2.27.401.1
S-OFF Bootloader unlocked.
(bootloader) kernel: lk
(bootloader) product: htc_hiau_ml_tuhl
(bootloader) version: 1.0
(bootloader) imei: 3574***********
(bootloader) version-main: 2.27.401.1
(bootloader) boot-mode: download
(bootloader) version-baseband: READ version-baseband ERROR
(bootloader) version-bootloader: 1.01.0000
(bootloader) mid: 0PK711000
(bootloader) cid: 11111111
Any ideas?
Click to expand...
Click to collapse
Since you have s-offed,I would recommend you settle the software and firmware on the same version.
About root issue, flash back stock boot image and re-root it.
yvtc75 said:
Since you have s-offed,I would recommend you settle the software and firmware on the same version.
About root issue, flash back stock boot image and re-root it.
Click to expand...
Click to collapse
Thanks for the hint, didn't think of that. Do you know where i can get a RUU or backup for the 2.30.707.1 version?
htc_hiau_ml_tuhl XC. What varian is it? Asia WWE? Asia TW? Asia HK? Europe? Please answer. I might find proper RUU for you in case you want to back to official ROM
antonmandara said:
htc_hiau_ml_tuhl XC. What varian is it? Asia WWE? Asia TW? Asia HK? Europe? Please answer. I might find proper RUU for you in case you want to back to official ROM
Click to expand...
Click to collapse
It is Asia WWE.
DarthLuda said:
It is Asia WWE.
Click to expand...
Click to collapse
.........................................
-------------------
Many thanks for providing the download link. However, putting it on a micro sd (fat32) and renaming it to 0PK7IMG.zip didn't work. it just skips installation with "EXIT".
Which recovery do i need for flashing this?
Do i need S-OFF to flash?
Is relocking the bootloader required?
I am currently using CleanSlate Asia ver. with Android 5 with root since it is the only rom that can be flashed over TWRP.
M9+ pw ruu
Hi antonmandara. do you have european ruu for htc m9+ pw?
marashmallow ruu?
..
__
Crazypit23 said:
Hi antonmandara. do you have european ruu for htc m9+ pw?
marashmallow ruu?
Click to expand...
Click to collapse
Is this what you need?
https://drive.google.com/file/d/0B6l0uYJfNaAlOXRwbUR3LUE3dFU/view?usp=sharing
(0PK7IMG_HIAU_ML_TUHL_M60_SENSE70_MR_HTC_Europe_2.30.401.1_Radio_1.1550V70.2501.0304_HT[W.T]_release_490382_combined_signed)
The download link will active for one week only. Goodluck.
DarthLuda said:
Many thanks for providing the download link. However, putting it on a micro sd (fat32) and renaming it to 0PK7IMG.zip didn't work. it just skips installation with "EXIT".
Which recovery do i need for flashing this?
Do i need S-OFF to flash?
Is relocking the bootloader required?
I am currently using CleanSlate Asia ver. with Android 5 with root since it is the only rom that can be flashed over TWRP.
Click to expand...
Click to collapse
Yes, I think so. You need to relock bootloader. S-On is just fine, just have to relock.
The zip file of the rom has to be by 3 orders in fastboot:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
Now if you can do the zip with that order i'll be happy.
if you cant then let me do it and explain to me how to convert to
three images of boot.img recovery.img and system.img. it has to be this way inside the zip file.
many thanks. :good:
I have same problem. Sucessfuly instal TWRP, reboot ok, instal BETA-SuperSU-v2.48 and bootloop ))
(bootloader) kernel: lk
(bootloader) product: htc_hiau_ml_tuhl
(bootloader) version: 1.0
(bootloader) imei: xxxxxxxxxxxx
(bootloader) version-main: 2.30.401.1
(bootloader) boot-mode: download
(bootloader) version-baseband: READ version-baseband ERROR
(bootloader) version-bootloader: 1.01.0000
(bootloader) mid: 0PK711000
(bootloader) cid: HTC__A07
How to extract system.img ?
zip_1.zip and so on. Archivers issue an error
help please
---------- Post added at 06:10 AM ---------- Previous post was at 05:38 AM ----------
zip is downloaded above 0PK7IMG_HIAU_ML_TUHL_M60_SENSE70_MR_HTC_Europe_2.30.401.1_Radio_1.1550V70.2501.0304_HT[W.T]_release_490382_combined_signed.zip and renamed to 0PK711000.zip
c:\adb>fastboot flash zip 0PK711000.zip
target reported max download size of 800000000 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 2488462141 is not a multiple of
the block size 4096
sending sparse 'zip' 1/1 (0 KB)...
error: write_sparse_skip_chunk: don't care size 2488462141 is not a multiple of
the block size 4096
error: write_sparse_skip_chunk: don't care size 2488462141 is not a multiple of
the block size 4096
OKAY [ 1.014s]
writing 'zip' 1/1...
(bootloader) HOSD CL#821792
(bootloader) ERR lzipv1_init : Cannot read header len bytes
(bootloader) ERR lzipv2_init : Cannot open file /dev/fastboot_download_i
(bootloader) sSvfy
FAILED (remote: 99 RU_UNKNOWN_FAIL terrible mishap )
finished. total time: 13.135s
sm_vl said:
I have same problem. Sucessfuly instal TWRP, reboot ok, instal BETA-SuperSU-v2.48 and bootloop ))
(bootloader) kernel: lk
(bootloader) product: htc_hiau_ml_tuhl
(bootloader) version: 1.0
(bootloader) imei: xxxxxxxxxxxx
(bootloader) version-main: 2.30.401.1
(bootloader) boot-mode: download
(bootloader) version-baseband: READ version-baseband ERROR
(bootloader) version-bootloader: 1.01.0000
(bootloader) mid: 0PK711000
(bootloader) cid: HTC__A07
How to extract system.img ?
zip_1.zip and so on. Archivers issue an error
help please
---------- Post added at 06:10 AM ---------- Previous post was at 05:38 AM ----------
zip is downloaded above 0PK7IMG_HIAU_ML_TUHL_M60_SENSE70_MR_HTC_Europe_2.30.401.1_Radio_1.1550V70.2501.0304_HT[W.T]_release_490382_combined_signed.zip and renamed to 0PK711000.zip
c:\adb>fastboot flash zip 0PK711000.zip
target reported max download size of 800000000 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 2488462141 is not a multiple of
the block size 4096
sending sparse 'zip' 1/1 (0 KB)...
error: write_sparse_skip_chunk: don't care size 2488462141 is not a multiple of
the block size 4096
error: write_sparse_skip_chunk: don't care size 2488462141 is not a multiple of
the block size 4096
OKAY [ 1.014s]
writing 'zip' 1/1...
(bootloader) HOSD CL#821792
(bootloader) ERR lzipv1_init : Cannot read header len bytes
(bootloader) ERR lzipv2_init : Cannot open file /dev/fastboot_download_i
(bootloader) sSvfy
FAILED (remote: 99 RU_UNKNOWN_FAIL terrible mishap )
finished. total time: 13.135s
Click to expand...
Click to collapse
Was having the same issue with fastboot methode. Then I used SD card method, after having reinstall stock recovery and relock the bootloader (S-On). Now I live with stock ROM.
Bootloop Sollution : from ext SD via TWRP I install SU v 2.78 (befor was installed v2.48 = bootloop)
After that the phone start normally ))
Through the Play Market updated the #SU to 2.82, everything is fine
Messed up few things and now need to revert back to stock. Looked through HTC dev site and cant' find any. Thanks.
PS C:\adb> fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_ocedugl
(bootloader) version: 1.0
(bootloader) max-download-size: 1579200000
(bootloader) serialno:
(bootloader) slot-count: 0
(bootloader) current-slot:
(bootloader) imei:
(bootloader) version-main: 1.64.709.12
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PZF20000
(bootloader) cid: HTC__621
all:
finished. total time: 0.016s
Found it. Region is Taiwan. Download link: https://androidfilehost.com/?fid=962021903579498682
what a waste of a download that was thanks wasnt even an ruu just full of zip's and cant be extracted into a bigger file
You don't need to extract the zip. Rename zip to 2PZFIMG & copy to root of SD Card (2nd sim slot). Turn off the phone and enter download mode. Phone will detect the RUU file & confirm the flash.
starfarer said:
You don't need to extract the zip. Rename zip to 2PZFIMG & copy to root of SD Card (2nd sim slot). Turn off the phone and enter download mode. Phone will detect the RUU file & confirm the flash.
Click to expand...
Click to collapse
i realized it in the end and managed to successfully get my phone working again and running oreo, so thanks and apologies for the tone it was because i was pi**ed at HTC for soft bricking my ultra!!