Please help me...
1. I wanted flash the new CM 10.2 on my LG G2 D802, I downloaded the mod, google apps and copied them to the internal memory of the phone, 2. then I booted into the recovery mod by the automated method(twrp), wiped the data and reset my device and when I tried to flash the rom and google apps, I couldn't find them.
3. I repeated step 1 and this time I didn't reset or wipe the data because I thought I might lose the files again. Then I queued up the rom and apps and flashed them and I rebooted the device.
5. But what I see is a round loading thing inside which CyanogenMod is written for about an hour now.
I am relatively new to these things, please help me.
What should I do now???
now when I try to turn the phone off, it starts automatically and I see the Cyanogenmod loading screen again.
Please Help
follow the flash directions to the letter in cm thread
Sent from my LG-D802
I have one question,
bachera said:
follow the flash directions to the letter in cm thread
Sent from my LG-D802
Click to expand...
Click to collapse
The thing I did two times is that I didn't wipe and factory reset in the recovery mod and then the CM rom would stay in loading. If I would wipe the phone, the CyanogenMod would also get deleted.
So how do I wipe and reset the phone and at the same time also keep the ROM file. I see many others installing and I wonder how they do it. I have been searching on the internet for the last two days for this, please help me:crying:
Put them to phone internal storage (sdcard) and then on recoveru wipe, advanced wipe, tick alk except internal storage and efs and recovery. Then ur good to go for clean install.
Sent from my LG-D802 using Tapatalk 2
And make sure your recovery is new(ish). You need version 2.6.3.2, if you are using an old version of TWRP that could be giving you problems
There no option of advanced wipe option in CWM recovery
moonjak said:
Put them to phone internal storage (sdcard) and then on recoveru wipe, advanced wipe, tick alk except internal storage and efs and recovery. Then ur good to go for clean install.
Sent from my LG-D802 using Tapatalk 2
Click to expand...
Click to collapse
There is no option of advanced wipe Clockwork Recovery v6.0.4.4, please guide me elaborately as I am flashing for the first time
Please help me brother...
Haseeb123 said:
There is no option of advanced wipe Clockwork Recovery v6.0.4.4, please guide me elaborately as I am flashing for the first time
Please help me brother...
Click to expand...
Click to collapse
Use the twrp. Not clockwork. There is a link for twrp in the cm thread. It's easy flashing it with flashify
Couldn't find TWRP for international D802
EniGmA1987 said:
And make sure your recovery is new(ish). You need version 2.6.3.2, if you are using an old version of TWRP that could be giving you problems
Click to expand...
Click to collapse
I couldn't find a TWRP image for the international G2, I am using Clockwork 6.0.4.4 and I don't find any advanced wiping options. If you know of any TWRP for my phone please let me know or help me clockwork recovery please
No twrp for international G2
offenberg said:
Use the twrp.
Click to expand...
Click to collapse
I couldn't find a twrp image for the international G2 on their website and anywhere else. Please send me the link of a twrp image which is compatible with the international G2. If not, please help me in any other way you can. I bricked my phone and reinstalled the LG software twice and have been working on this for two days, please help me.
http://forum.xda-developers.com/showthread.php?t=2472223
Haseeb123 said:
I couldn't find a twrp image for the international G2 on their website and anywhere else. Please send me the link of a twrp image which is compatible with the international G2. If not, please help me in any other way you can. I bricked my phone and reinstalled the LG software twice and have been working on this for two days, please help me.
Click to expand...
Click to collapse
You just had to go in the android dev. Forum, the one just under q&a...
I found it in 15sec.
http://forum.xda-developers.com/showthread.php?t=2469995
I know you are new to flashing and stuff.
But you should browse the forums a little bit more before asking for help.
Good luck getting it work tho !
One more thing bro
offenberg said:
http://forum.xda-developers.com/showthread.php?t=2472223
Click to expand...
Click to collapse
So now I have to copy CM 10.2 to the root of my device memory, then use flashify app to boot into twrp, and wipe every folder except efs, recovery and internal storage and flash CM. Did I get it correctly, if not, please correct me as I am about to flash CyanogenMod.
Thanks in advance
I love good people!
You should be running CM in no time. good luck. Remember to backup stock rom. Much more convenient if you want to go back.
Edit: I have my knowledge from reading this forum. I haven't done this myself yet. Planning on testing CM tomorrow.
Some folders which I don't want to wipe don't appear in advanced wipe
offenberg said:
You should be running CM in no time. good luck. Remember to backup stock rom. Much more convenient if you want to go back.
Edit: I have my knowledge from reading this forum. I haven't done this myself yet. Planning on testing CM tomorrow.
Click to expand...
Click to collapse
Some folders which I don't want to wipe don't appear in advanced wipe. The folders which I see in the advanced wiping menu are as follows: dalvic cache, system, data, internal storage, cache.
Please tell me what to do now
Wipe dalvik, system, data and cache.
Bigbigthanks!
offenberg said:
You should be running CM in no time. good luck. Remember to backup stock rom. Much more convenient if you want to go back.
Edit: I have my knowledge from reading this forum. I haven't done this myself yet. Planning on testing CM tomorrow.
Click to expand...
Click to collapse
May God bless you, you're my Android hero! I am now running CyanogenMod!:good:
Haseeb123 said:
May God bless you, you're my Android hero! I am now running CyanogenMod!:good:
Click to expand...
Click to collapse
Im no hero. Just helping a friend in need. now, go enjoy CM. The best of android.
Last Question!
offenberg said:
Im no hero. Just helping a friend in need. now, go enjoy CM. The best of android.
Click to expand...
Click to collapse
I had forgotten Google apps, so this is the way I'll do it and correct me if I'm wrong: Download Gapps from goo.im and use flashify to boot into twrp and install google apps without wiping anything.
Thanks again. Please help
Haseeb123 said:
I had forgotten Google apps, so this is the way I'll do it and correct me if I'm wrong: Download Gapps from goo.im and use flashify to boot into twrp and install google apps without wiping anything.
Thanks again. Please help
Click to expand...
Click to collapse
Same as before. Reboot into recovery. Wipe - flash cm - flash gapps- reboot
Edit. I'm tired. Of course just flash gapps. No need to wipe
Related
So, I got jealous of my brother... I too wanted a custom rom for my GT-i9500... I downloaded "pac_jfltexx-Black-Power-Edition_20140106"....
Downloaded Gapps.. After I did all the steps, which were:
1. Wipe cache
2. Wipe Data/factory reset
3. Wipe dalvik cache
4. Format /system
Then I selected, install zip from external SD card... I saw that, it said during installition, "Installing for i9505", and I was like whaa!?!? Afterwards, I did a search on the internet that what happens when we format system, it said that you ought to install a ROM because the system is without an OS..
After realizing my mistake, I STILL went ahead and installed it like a retard xD..
And now again I did all the above steps, somehow I have the CWM 6.0.3.3 still installed and opened right here... I am not able to do anything on my phone... Please tell me how to overcome this situation...
I searched on the internet, I found out that I can still install any ROM. I'm downloading KingCobra ROM build 5...
Now what do I do?
P.S.- I have a nandroid backup, but its not on my phone's sd card or the ext sd card, its on my computer, can I do anything with that backup and use odin to flash the backup?
- Download one firmware of Sammobile good for ur i9500
- Full wipe(data,system, cache and dalvick cache) in Recovery
- Go to Download Mode
- Flash the new firmware with Odin
- Enjoy it
Joku1981 said:
- Download one firmware of Sammobile good for ur i9500
- Full wipe(data,system, cache and dalvick cache) in Recovery
- Go to Download Mode
- Flash the new firmware with Odin
- Enjoy it
Click to expand...
Click to collapse
Thanks, but I'm already downloading KingCobra ROM... I can flash that too right?
Hey, but the new ROM is in .zip format. Odin doesn't read it. WHAT TO DO?! PLEASE HELP!
TheSinister said:
Hey, but the new ROM is in .zip format. Odin doesn't read it. WHAT TO DO?! PLEASE HELP!
Click to expand...
Click to collapse
Flash it in CUSTOM RECOVERY
Joku1981 said:
Flash it in CUSTOM RECOVERY
Click to expand...
Click to collapse
But, I don't know how to put it there...My computer is not showing my device in My Computer..?
I have an idea.. I am going to put the downloaded ROM on the extSDcard via a Card Reader, and then maybe I can flash it? Or I can put my nandroid backup there?
Will this work?
Alright, so I put the KingCobra on the extSDcard via card reader, and I flashed it after wiping cache, data/facotory reset, system /format, and wipe dalvik cache....
I flashed it. But I didn't flash the Gaaps since it wasn't written there...
My phone proceeded the display "Samsung GT-i9500", then the music played of Samsung, and right now it's just there, the LED giving off blue light, getting dim and bright, I am just there for the last 5 minutes..
P.S.- The zip of KingCobra was of 1.4 GB...I downloaded the build 5 from here
http://forum.xda-developers.com/showthread.php?t=2497087
It's still stuck, what to do? Or just sit back since it's a big ROM?
Finlyno Had
Okay, I read on the KingCobra forum place on XDA. It said, that I'll have to flash a pit file. And many other instructions which I didn't understand. The startup sucked my whole phone's battery, and the only change was that the LED started to blink in Green color as well as Blue... Right now, my phone is just lying, I'm charging the battery, and it's playing the Red LED.
Please help, I don't know what to do.
need sacteh
I had a nandroid backup. I restored my phone. But now stuck at the samsung boot logo... Please help.. :crying:
I did a factory rest, flashed the restore, wiped cache, wiped dalvik cache, now stuck at samsung logo again :crying: :crying: :crying:
Pretty sure you were told in the first reply you got to go get a stock rom from Samfirmware & flash it with Odin to get a 'clean slate' & to then either re-root your phone and try flashing the custom rom again (and maybe read the flashing instructions for the rom in question this time) or restore a backup.
Oh...Look...That's exactly what you were told (and you haven't done it)
You clearly have no idea what you're doing (how to recover in particular, and obviously how to flash the rom in question as well), I strongly suggest you do what was suggested (flash a stock rom) if you want your phone working again anytime soon.
If you have philz recovery, then you can attach a memory stick with an usb otg cable, and make a restore from there, or install a new rom
Enviado desde mi SGH-I337M mediante Tapatalk
MistahBungle said:
Pretty sure you were told in the first reply you got to go get a stock rom from Samfirmware & flash it with Odin to get a 'clean slate' & to then either re-root your phone and try flashing the custom rom again (and maybe read the flashing instructions for the rom in question this time) or restore a backup.
Oh...Look...That's exactly what you were told (and you haven't done it)
You clearly have no idea what you're doing (how to recover in particular, and obviously how to flash the rom in question as well), I strongly suggest you do what was suggested (flash a stock rom) if you want your phone working again anytime soon.
Click to expand...
Click to collapse
I tried downloading the ROM from there, but it's giving an error, I tried from my friend's home, still the same error, so I'm pretty sure that it's the site's problem. Right now I'm following these particular instructions...
http://forum.xda-developers.com/showthread.php?t=2265477
If I encounter a problem, I'll surely ask before doing anything reckless...
vashminted said:
If you have philz recovery, then you can attach a memory stick with an usb otg cable, and make a restore from there, or install a new rom
Enviado desde mi SGH-I337M mediante Tapatalk
Click to expand...
Click to collapse
No, I don't, I have CWM recovery 6.0.3.3.
TheSinister said:
I tried downloading the ROM from there, but it's giving an error, I tried from my friend's home, still the same error, so I'm pretty sure that it's the site's problem. Right now I'm following these particular instructions...
http://forum.xda-developers.com/showthread.php?t=2265477
If I encounter a problem, I'll surely ask before doing anything reckless...
Click to expand...
Click to collapse
If your having a problem with downloading the rom from samsung. Give me the exact link and ill be happy to make a mirror for you in MEGA. Have a nice day.
Sent from Hell ?
Repulsa said:
If your having a problem with downloading the rom from samsung. Give me the exact link and ill be happy to make a mirror for you in MEGA. Have a nice day.
Sent from Hell ?
Click to expand...
Click to collapse
Okay people, everyone, thanks for your help,
I followed this guide:
http://forum.xda-developers.com/showthread.php?t=2265477
And my phone works fine now!
I don't care about the applications.. XD
So i finally rooted and went into twrp. This is the first rom im installing. Ive done this whole root thing for a little over 4 years now.
I went to do a wipe, system, cache, dav....and its been stuck on "factory reset" for 10 mins now what do i do. did i do something wrong?
formatting cache using make_ext4s function" is what its saying
the phone shut of and i thought it was done for. It did reboot but nothing was wiped. am i doing something wrong here?
normally you just go into the twrp, slide to wipe everything, install rom, gapps, wipe cache and dav and reboot.
xzero425x said:
So i finally rooted and went into twrp. This is the first rom im installing. Ive done this whole root thing for a little over 4 years now.
I went to do a wipe, system, cache, dav....and its been stuck on "factory reset" for 10 mins now what do i do. did i do something wrong?
formatting cache using make_ext4s function" is what its saying
the phone shut of and i thought it was done for. It did reboot but nothing was wiped. am i doing something wrong here?
normally you just go into the twrp, slide to wipe everything, install rom, gapps, wipe cache and dav and reboot.
Click to expand...
Click to collapse
Which twrp are you using? 2.6.3.2 has slow wipes...really slow..... But you should wipe cache,davlik,system, and data then flash ROM and gapps if needed then wipe cache and davlik again then reboot!
RubbleTea said:
Which twrp are you using? 2.6.3.2 has slow wipes...really slow..... But you should wipe cache,davlik,system, and data then flash ROM and gapps if needed then wipe cache and davlik again then reboot!
Click to expand...
Click to collapse
thats the one im using!! is there a newer one around? ill give it another shot.
EDIT: I did them separate, and tried installing a 4.4.2 rom and it keeps failing, hmm
xzero425x said:
thats the one im using!! is there a newer one around? ill give it another shot.
Click to expand...
Click to collapse
Which build do you have? I'll post the link if you want?
RubbleTea said:
Which twrp are you using? 2.6.3.2 has slow wipes...really slow..... But you should wipe cache,davlik,system, and data then flash ROM and gapps if needed then wipe cache and davlik again then reboot!
Click to expand...
Click to collapse
RubbleTea said:
Which build do you have? I'll post the link if you want?
Click to expand...
Click to collapse
tmobile, now i tried to reboot and it just keeps taking me right back to twrp
http://www.teamw.in/project/twrp2/197
Here's the link just click on which build....if you have tmobile ...there's a unofficial 2.6.3.3 I think and 2.6.3.4 or try philz cwm recovery here;
http://forum.xda-developers.com/showthread.php?t=2554053
RubbleTea said:
http://www.teamw.in/project/twrp2/197
Here's the link just click on which build....if you have tmobile ...there's a unofficial 2.6.3.3 I think and 2.6.3.4 or try philz cwm recovery here;
http://forum.xda-developers.com/showthread.php?t=2554053
Click to expand...
Click to collapse
My computer for some reason isnt recognizing the phone, so i cant put any files on it. when i hit reboot, it just goes back to twrp....
should i do a recovery of my backup?
xzero425x said:
My computer for some reason isnt recognizing the phone, so i cant put any files on it. when i hit reboot, it just goes back to twrp....
should i do a recovery of my backup?
Click to expand...
Click to collapse
Did you flash a ROM? After wiping....you could use koush universal drivers and sideload a ROM if your stuck in recovery.....sounds like you Dont have a rom
RubbleTea said:
Did you flash a ROM? After wiping....you could use koush universal drivers and sideload a ROM if your stuck in recovery.....sounds like you Dont have a rom
Click to expand...
Click to collapse
i tried flashing gummy 4.4.2 and it keeps failing, no idea why. maybe the older twrp.
xzero425x said:
i tried flashing gummy 4.4.2 and it keeps failing, no idea why. maybe the older twrp.
Click to expand...
Click to collapse
OK do you have signature check off? Do you have gapps too?
RubbleTea said:
OK do you have signature check off? Do you have gapps too?
Click to expand...
Click to collapse
yes and yes
the error it gets is - error executing updater binary in zip (where my file is)
:good:
xzero425x said:
yes and yes
Click to expand...
Click to collapse
Ah....2.6.3.2 doesn't support 4.4 Roms man try philz recovery
RubbleTea said:
:good:
Ah....2.6.3.2 doesn't support 4.4 Roms man try philz recovery
Click to expand...
Click to collapse
Derp. Alright well. whats my best bet from here? My computer isnt seeing the device atm and i dont have a rom?
Recover my old image and see if that works or something else?
xzero425x said:
Derp. Alright well. whats my best bet from here? My computer isnt seeing the device atm and i dont have a rom?
Recover my old image and see if that works or something else?
Click to expand...
Click to collapse
Crap guessing you don't have a backup......try using koush universal drivers to get your phone recognized...and use adb to sideload a ROM or use adb to push the philz cwm recovery zip to your recovery
---------- Post added at 05:09 PM ---------- Previous post was at 05:05 PM ----------
If you want to sideload a ROM its easy and I'll guide you through or you can push a zip with adb to your recovery
RubbleTea said:
Crap guessing you don't have a backup......try using koush universal drivers to get your phone recognized...and use adb to sideload a ROM or use adb to push the philz cwm recovery zip to your recovery
Click to expand...
Click to collapse
no no! i do have a backup! Thats what i meant from restoring my old image. Ill recover my back up now, then hopefully put the newer twrp on it, then flash the 4.4 rom. hopefully
xzero425x said:
no no! i do have a backup! Thats what i meant from restoring my old image. Ill recover my back up now, then hopefully put the newer twrp on it, then flash the 4.4 rom. hopefully
Click to expand...
Click to collapse
Yah try the backup...the newer twrps for tmo aren't official either so you'll have to find
RubbleTea said:
Yah try the backup...the newer twrps for tmo aren't official either so you'll have to find
Click to expand...
Click to collapse
the backup is restoring now, taking a bit
xzero425x said:
the backup is restoring now, and i cant even find the new twrp in that list, sadly bc i cant figure out the name for the tmobile lgg2. like my old nexus was "toro" but im not sure what this is "called"
Click to expand...
Click to collapse
If you want to flash 4.4. Try the philz cwm recovery link...its a zip so just flash and reboot recovery....there's a unofficial 2.6.3.4 in android development section but no longer supported......I would choose philz over 2.6.3.4 IMO only....and thanks for all the thanks!!!! Just saw them
RubbleTea said:
If you want to flash 4.4. Try the philz cwm recovery link...its a zip so just flash and reboot recovery....there's a unofficial 2.6.3.4 in android development section but no longer supported......I would choose philz over 2.6.3.4 IMO only....and thanks for all the thanks!!!! Just saw them
Click to expand...
Click to collapse
haha thank you! Alright, my phone is alive, im downloaded the philz recovery. going to flash it and try the 4.4..again, haha here we go
I wanted to update my note 1 to 4.4.1 kitkat but unfortunately it did not happen.
first i rooted my phone installed cwm with 6.0.3.2v and then when i flashed 6.0.4.2v rom but after that my phone it not able to boot after after samsung.
pls help me
and i am sorry for my english
Rohangarg4388 said:
I wanted to update my note 1 to 4.4.1 kitkat but unfortunately it did not happen.
first i rooted my phone installed cwm with 6.0.3.2v and then when i flashed 6.0.4.2v rom but after that my phone it not able to boot after after samsung.
pls help me
and i am sorry for my english
Click to expand...
Click to collapse
im having the same problem But with ANY aosp rom after samsung logo it bootloops and doesnt do anything else. so it just wont boot
Rohangarg4388 said:
I wanted to update my note 1 to 4.4.1 kitkat but unfortunately it did not happen.
first i rooted my phone installed cwm with 6.0.3.2v and then when i flashed 6.0.4.2v rom but after that my phone it not able to boot after after samsung.
pls help me
and i am sorry for my english
Click to expand...
Click to collapse
4.4.1? why are you flashing incredibly old nightlies?
Also it sounds like you flashed from a very old CWM build which likely didn't set selinux contexts properly. The included Omni kernel has a recent TWRP, reflash omni and wipe using that.
Entropy512 said:
4.4.1? why are you flashing incredibly old nightlies?
Also it sounds like you flashed from a very old CWM build which likely didn't set selinux contexts properly. The included Omni kernel has a recent TWRP, reflash omni and wipe using that.
Click to expand...
Click to collapse
how should just start my phone because i ried to install a new firmware through recovery mode it says some error.
so how should start up my phone
PLS DO HELP FAST
Rohangarg4388 said:
how should just start my phone because i ried to install a new firmware through recovery mode it says some error.
so how should start up my phone
PLS DO HELP FAST
Click to expand...
Click to collapse
Flash this file in recovery:
http://ge.tt/7mJqhvw/v/0?c
Then, reboot to recovery again and perform a full wipe (factory reset/data wipe, wipe cache, wipe dalvik cache, wipe system, wipe preload). You'll find those options in various places there, so dig around. Once that is done you can flash OmniROM and Gapps
and @zachdees - you most probably didn't do a full wipe, so do those steps above and it will work for you too
can you send the omni rom file
Rohangarg4388 said:
can you send the omni rom file
Click to expand...
Click to collapse
you should find your rom version here if it's officially supported: http://dl.omnirom.org/
If not..find it via the search function in the forum.
If i just want to install stockrom instead of omni rom , can you pls tell me how to do it.
pls tell me each thing step by step
http://forum.xda-developers.com/showthread.php?t=1424997
How to flash official ROM through recovery. Particularly 4.0.4 .
No...as i said use the search function and look in your device specific forum. The probability is high that your questions have already been answered. As well as sources which have already been linked. You might want to have a read of the forum rules as well as general guidelines before posting.
Sent from my Find 5 using XDA Premium 4 mobile app
Hey guys, i'm kinda new to rooting(had iphone previously) and i'm having some trouble. The phone is rooted already(4.4.2), i installed ROM manager and now i dont know how to boot it to cwm recovery, every tutorial i follow it goes to stock recovery. I tried installing cwm with odin but it doesn't get through setup connection, or it does but it fails. I wanted to get the google edition ROM. Thanks in advance
Hetfield88 said:
Hey guys, i'm kinda new to rooting(had iphone previously) and i'm having some trouble. The phone is rooted already(4.4.2), i installed ROM manager and now i dont know how to boot it to cwm recovery, every tutorial i follow it goes to stock recovery. I tried installing cwm with odin but it doesn't get through setup connection, or it does but it fails. I wanted to get the google edition ROM. Thanks in advance
Click to expand...
Click to collapse
Have you tried the below app? Supposed to be good for flashing things.
https://play.google.com/store/apps/details?id=neldar.sgs.kernel.flasher
Sent from my GT-I9505 using Tapatalk
what is exactly flashing kernel? is it the same as flashing cwm recovery? so confused atm
Hetfield88 said:
what is exactly flashing kernel? is it the same as flashing cwm recovery? so confused atm
Click to expand...
Click to collapse
You don't need flash any kernel for have a custom recovery. Take a look:
~ For i9500: HERE
~ For i9505: HERE
Joku1981 said:
You don't need flash any kernel for have a custom recovery. Take a look:
Click to expand...
Click to collapse
Thanks a lot man!
Edit:ahem i think i messed up, i got the custom recovery to work, then i did a wipe to install the google rom, but it failed for some reason, what do i do now?
You sound like you really don't know what you're mate.
I think the best advice anyone can give you is to put your phone down and read some more.
If you have successfully flashed CWM then all you need to do is flash a ROM of your choice then wipe data / factory reset.
Also before you even think about flashing anything to your phone you NEED to back up your EFS partition.
Sent from my GT-I9505 using XDA Premium HD app
Obagleyfreer said:
You sound like you really don't know what you're mate.
I think the best advice anyone can give you is to put your phone down and read some more.
If you have successfully flashed CWM then all you need to do is flash a ROM of your choice then wipe data / factory reset.
Also before you even think about flashing anything to your phone you NEED to back up your EFS partition.
Sent from my GT-I9505 using XDA Premium HD app
Click to expand...
Click to collapse
you're right but now, since it's in recovery mode i have to fix this asap. i entered the recovery and did wipe data/factory reset like the tutorial said, then proceeded to install zip(the ROM) but it fails E/... status 7 installation aborted.
and i did backup data and sd card but the backups are in my pc and i cant get to them in recovery mode :/
Hetfield88 said:
you're right but now, since it's in recovery mode i have to fix this asap. i entered the recovery and did wipe data/factory reset like the tutorial said, then proceeded to install zip(the ROM) but it fails E/... status 7 installation aborted.
and i did backup data and sd card but the backups are in my pc and i cant get to them in recovery mode :/
Click to expand...
Click to collapse
Don't panic bad it's just down to the version of recovery ?
Just go back into recovery & try flashing again once you get status 7 go back & second line from bottom where you chose zip you will see "allow update old binary" tick the box if not ticked or until if it's selected then select zip to flash & it'll go straight through
Hello,
I was modifying build.prop, had made a backup and saved it in another folder in my phone, after modifying, I think it's because I've forgotten to set permissions or something, now I'm unable to bootup after rebooting.
Any idea how do I solve this? I've read online something about adp or something, but I've totally no clue about these.
Is there anyone who has a solution to this?
With sincerity
Xituc
If you did a backup and have TWRP, just delete the old build.prop in /system, move the backup there and set permissions. ;
This_Guyse said:
If you did a backup and have TWRP, just delete the old build.prop in /system, move the backup there and set permissions. ;
Click to expand...
Click to collapse
I don't have it anymore I think, went to recovery mode, thought I could solve it by resetting by clearing data etc
How do I solve it now?
Xituc said:
I don't have it anymore I think, went to recovery mode, thought I could solve it by resetting by clearing data etc
How do I solve it now?
Click to expand...
Click to collapse
System, data, internal sd, cache, what did you wipe? If you:
1. Wiped data/system :- you can only flash a new rom since you don't know ADB. Or flash stock via odin.
2. Internal sd :- that's it, flash stock firmware via odin.
This_Guyse said:
System, data, internal sd, cache, what did you wipe? If you:
1. Wiped data/system :- you can only flash a new rom since you don't know ADB. Or flash stock via odin.
2. Internal sd :- that's it, flash stock firmware via odin.
Click to expand...
Click to collapse
How do I do that? Is there a way I can skype you or something? Sorry, really needed help!
Xituc said:
How do I do that? Is there a way I can skype you or something? Sorry, really needed help!
Click to expand...
Click to collapse
Which options did you wipe in your recovery?
radicalisto said:
Which options did you wipe in your recovery?
Click to expand...
Click to collapse
I just clicked wipe factory reset smth along those lines.
Xituc said:
I just clicked wipe factory reset smth along those lines.
Click to expand...
Click to collapse
Either reflash your custom ROM via TWRP (dirty flash and it'll keep your data etc) or do a stock flash via ODIN and start again. Can't remember if you can use ADB to restore your build.prop been an age since I used an N3.
radicalisto said:
Either reflash your custom ROM via TWRP (dirty flash and it'll keep your data etc) or do a stock flash via ODIN and start again. Can't remember if you can use ADB to restore your build.prop been an age since I used an N3.
Click to expand...
Click to collapse
My computer doesn't have my device in device manager when I've connected it, was unable to try using ADB earlier when I've tried, any idea why?
Anyway, can you direct me to a guide way I can do a stock flash via ODIN? I'm seeing so many threads in this forum but I've no idea which one is suitable for my phone.
Thanks!!
Xituc said:
My computer doesn't have my device in device manager when I've connected it, was unable to try using ADB earlier when I've tried, any idea why?
Anyway, can you direct me to a guide way I can do a stock flash via ODIN? I'm seeing so many threads in this forum but I've no idea which one is suitable for my phone.
Thanks!!
Click to expand...
Click to collapse
If you were using stock then you'll need to have a read around general and learn how to flash with ODIN. It's pretty straight forward, you can grab official ROMs from either here on XDA or Sam mobile/firmware. The link escapes my mind currently.
If you were using a custom ROM, download to your PC and use ADB Side load or download to your External SD Card and flash via recovery.
You can use THIS for ADB drivers, it's 15second ADB install and it should work for you.
radicalisto said:
If you were using stock then you'll need to have a read around general and learn how to flash with ODIN. It's pretty straight forward, you can grab official ROMs from either here on XDA or Sam mobile/firmware. The link escapes my mind currently.
If you were using a custom ROM, download to your PC and use ADB Side load or download to your External SD Card and flash via recovery.
You can use THIS for ADB drivers, it's 15second ADB install and it should work for you.
Click to expand...
Click to collapse
Weird, computer won't have my phone's device show up...
EDIT:
In the development section, I see lots of roms, any idea which one should I download? I just want one which I can flash to and get my phone working again.
Thank you! I'm on SN-N9005 btw!
Can I contact you via skype or something btw?
Xituc said:
Weird, computer won't have my phone's device show up...
EDIT:
In the development section, I see lots of roms, any idea which one should I download? I just want one which I can flash to and get my phone working again.
Thank you! I'm on SN-N9005 btw!
Click to expand...
Click to collapse
For Stock you'll need the ROM for your region, this is quite important otherwise it causes headaches. For custom, it's entirely up to you, you can choose any TouchWiz based (stock look and feel - I personally recommend AllianceROM by @sparky b for TW based) Or AOSP based (Pure Android with no Samsung features - Temasek's ROM is stellar in this department and the new OMNIROM for the Note 3 will be superb once the dev has it sorted 100%, it's still being debugged and beta tested currently and dev tree's etc redone, stop by @jakew02's thread and have a read at where he is up to)
If you have the N9005 you'll be OK to use any custom ROM for that device. Just stay away from the Exynos (N900) ROMs as they won't work and will brick your phone.
I've recommended a couple of ROMs which are both Stable and feature filled plus one which will be great once fully flying. Other ROMs in the development section are just as great, however, I can only comment on the two I used solidly when I had my Note, and the one's I have ran on other devices. But ultimately it's your choice.