[Q] Really need help. - Galaxy S 4 Q&A, Help & Troubleshooting

Evening all, really looking for advice here. Lets start of with some that will probably anger the majority of you, I am a Newbie.
I have a Samsung S4 GT-I9505 on Vodaphone.
A few days ago after days of ready I decided to root the phone and install PhilZ Recovery. That all went well
I then decided to install the Omega V13 Rom and this is where the issues start.
For those over in the Development thread that I can not access yet will off seen many people saying all is good and others saying all is bad. Well I have issues, I have eventually got the Wifi sorking but I have no sound at all. Everytime I try to watch a video it errors out and restarts.
When I try to make a call it goes to the dialer, I enter the number and press call and the screen goes black however the outgoing call connects. I cant end the call as the screen is black, however if I keep pressing the home button I eventually get to the main screen.
The same happens on incoming calls, the screen just goes black and the phone vibrates due to not producing any sound.
This is what I currently have
Model Number
GT-I9505
Android Version
4.3
Baseband Version
I9505XXUEMJ5
Kernel Version
3.4.67-Google-Edition-v-10
[email protected] #1
Build Number
Omega v13.1 - XXUEMJ5
SELinux Status
Permissive
Secure Boot Status
Type : Samsung

This is what I read in the Omega thread
OisteinR said:
Regarding flashing modems with Odin.
Use the file 'GSM_Modem_XXUEMJ5_and_LTE_Modem_XXUBMH1.tar'
1. Open Odin (3.04 or 3.07)
2. Untick 'Auto Reboot'
3. Select the .tar-file in PHONE
4. Shut down phone
5. Start phone in Download mode (Power + Vol down)
6. Connect phone
7. Press Start in Odin
8. When flashing ends, wait until the message box changes from RESET!(Blue) to PASS!(Green) This takes about 2 minutes.
If you don't wait for this, the result is more random....​​9. Unplug your phone and restart
10. Enjoy Omega 13.1
This works every time for me...
Click to expand...
Click to collapse

thanks for the comments, however I have tried that loads of times.
I really need access to that development forum, if any mods are present please wave your magic wand.:angel:

Here's how others have fixed the issue. I still am unable to find a good solution in the development thread.
talexop said:
Sorry I just download this file.... This file needs to be installed from odin just by selecting the tar as PHONE,, and it installs both modems..
But you can try the following files as seperate files...
Modem MJ5
http://www.androidfilehost.com/?fid=23156208500212197
Wifi Fix MH1
http://d-h.st/f99
I have tried and it works... But I have the old bootloader...
If you have the new bootloader you might want to try this...(I have not tried it) Be aware that of course you will set knox to 1... BUT ONLY IF YOU HAVE ALREADY THE NEW BOOTLOADER..
Omega ROM does not include the new bootloader!
Install MJ5 modem from ODIN
http://www.androidfilehost.com/?fid=23156208500212197
Install wifi fix MJ5 from ODIN
http://d-h.st/oGp
AND!!!!
install stock kernel from CWM
http://d-h.st/83M
Click to expand...
Click to collapse
---------- Post added at 12:09 AM ---------- Previous post was at 12:08 AM ----------
Here's someone else solution.
cdyna said:
I had the no sound issue, too. Tried every method of flashig the different modems but to no avail.
What I did to fix it was flashing Mega pre-rooted Stock Rom through Odin from this thread: http://forum.xda-developers.com/showthread.php?t=2250824
I then re-installed CWM and installed Omega 13.1 without installing any of the modems and everything seems to be working now. I don't use LTE though, so don't know if that works.
Just be aware of the KNOX problems. Mine was showing warranty void already anyway, so I didn't care. Figured it's better to lose warranty than sound...
Click to expand...
Click to collapse

Related

[Q] Help reverting to stock... usual steps not working

Goal:
Latest firmware info from SamMobile
GT-I9505 Galaxy S 4 LTE
PDA: I9505XXUBMGA
CSC: I9505OXXBMG3
MODEM: I9505XXUBMGA
Previous set up:
Custom Recovery. Philz Touch
ROM http://forum.xda-developers.com/showthread.php?t=2352258
I has also attempted to update the base band when on this rom to MGA to the About device Baseband version stayed at XXUBMEA
Situation: I was getting lots of force closureswouldn'tentually it just wouldnt reboot, thenre-flashedvery failed. I reflashed the recovery and restored from wouldn'thowever it still wouldnt boot. (About 90% of the way through the bSamsungmation the audio samsung logo sound died. The Samsunghen went to the "samsung" static image with the blue LED light on and just stayed there... for about 30 mins before I force shutdown the phone.
I the attempted to flash stock ROM (listed in Goal above) downloaded from SamMobile. The same thing happened again. Boot gets stuck. I got into stock recovery and wre-flashedactory reset and reflashed. The ROM installed but I had no wifi. I then flashed the I9505XXUBMGA modem. Reboot and I had wifi. However About device still shows XXUBMEA baseband.
I wanted to see if I was able to get OTA updates from Samsung however Samsung update app is saying that the device is modified... so something isnt quite right yet. Im guessing it might be to do with the modem / baseband but to be honest I am a bit lost.
Screen shot of my current About Device Information. Also Device Status is showing as custom..
Thinking outloud here... would a Root->TriangleAway->reset counter etc->flash philz touch->full wipe for new ROM->boot to download->Odin flash stock fix it? Or could that do any further damage?
First install chainfires triangle away to reset your flash counter. For this you need root.
Then do a factory reset in recovery and flash stock with odin.
You wont get ota when flash counter >0 so give it a try.
Hopefully this helps
EDIT: If the new modem wont appear after a odin flash then uncheck the auto reboot option in odin and flash the modem twice, that helped for me.
Device Status is showing as custom, because you had flashed non-stock rom...
so the wifi not working, but can you make call??
The first time I flashed OMEGA ROM, wifi did not work, but flashed Adam kernel fixing the issue.
Look at his attachment, mobile connection seems working
@polcup please report back if it worked.
cellegg said:
Device Status is showing as custom, because you had flashed non-stock rom...
so the wifi not working, but can you make call??
The first time I flashed OMEGA ROM, wifi did not work, but flashed Adam kernel fixing the issue.
Click to expand...
Click to collapse
Wifi is now working after I flashedlashed the I9505XXUBMGA modem. Rebooted and I had wifi. However About device still shows XXUBMEA baseband.
Calls and mobile date is fine.
_sebha said:
Look at his attachment, mobile connection seems working
@polcup please report back if it worked.
Click to expand...
Click to collapse
Yep, I will try that over lunch and see if it works. Not sure that will get me to the XXUBMGA modem though but its certainly a step in the right direction.
I really appreciate both your replys. Thanks.
Look at my edit in first post.
Uncheck auto reboot in odin and flash only the modem twice (manual reboot to download mode after first flash) after second flash reboot device.
That worked for me
_sebha said:
Look at my edit in first post.
Uncheck auto reboot in odin and flash only the modem twice (manual reboot to download mode after first flash) after second flash reboot device.
That worked for me
Click to expand...
Click to collapse
Superb! I will try that as well. Thanks!!
Update
I was unable to root I9505XXUBMGA. CF-Autoroot didnt stick. I tried a couple of installs. One through Odin and one through CWM. Neither took.
I flashed an older pre-rooted stock rom I had XXUBMEA and then ran Triangle away. It returned the counter to '0' and brought the status back to official.
So now im back to stock MEA and to be honest I am happy to stay here for a bit. I will maybe move up to MGA if I find a pre-rooted version.
Thanks for your help.
Sorted!

Stock rom fails in Odin

I have tried out several roms, I have tripped knox and I am on new bootloader.
I am wondering what I can/should do to get a working stock phone again.
I can do:
Install Omega Rom V19. Installs and runs with no sound.
Install Omega RomV21. Fails during install. At the very end.
Install I9505XXUEML6-PRE-ROOTED-Odex-KNOXFree-CWM. Fails during the end of install.
Install I9505_-_Official_Google_Edition_4.4.2_by_Jamal2367_Final-R1.1.Installs and works, but no sound.
I have downloaded the newest firmware for my carrier: I9505XXUEML6_I9505TENEML1_TEN through Odin, but ut fails. I have tried both 3.04 and 3.09.
On the phone below the knox-line it says this is download mode:
SW REV. CHECK FAIL : fused 4. Binary : 3
Can anyone make anything of this? Is my original firmware too old? Do I have to try another rom? Is there one to try? As far as I know the new bootloader will not accept downgrades. True? The firmare I have tried is dated January 19th 2014.
I am at a totall loss here
jadajada said:
I have tried out several roms, I have tripped knox and I am on new bootloader.
I am wondering what I can/should do to get a working stock phone again.
I can do:
Install Omega Rom V19. Installs and runs with no sound.
Install Omega RomV21. Fails during install. At the very end.
Install I9505XXUEML6-PRE-ROOTED-Odex-KNOXFree-CWM. Fails during the end of install.
Install I9505_-_Official_Google_Edition_4.4.2_by_Jamal2367_Final-R1.1.Installs and works, but no sound.
I have downloaded the newest firmware for my carrier: I9505XXUEML6_I9505TENEML1_TEN through Odin, but ut fails. I have tried both 3.04 and 3.09.
On the phone below the knox-line it says this is download mode:
SW REV. CHECK FAIL : fused 4. Binary : 3
Can anyone make anything of this? Is my original firmware too old? Do I have to try another rom? Is there one to try? As far as I know the new bootloader will not accept downgrades. True? The firmare I have tried is dated January 19th 2014.
I am at a totall loss here
Click to expand...
Click to collapse
Did you get anywhere with this? I've got a similar issue after trying to flash a kitkat rom, the correct bootloader and modem combo and I have no sound/cant make calls. DSP manager always FC's and if I try and make a call, it goes to a blank screen until the call is hung up (someone said his phone rings but cant hear anything - cant hear sound on my end either.)
Other thing is that in download mode I cant see anything to do with knox - there is no entry for knox at all.
One thing suggested is to download Samsung stock rom and flashing that, then try something else.
Any help appreciated.
FelixCited said:
Did you get anywhere with this? I've got a similar issue after trying to flash a kitkat rom, the correct bootloader and modem combo and I have no sound/cant make calls. DSP manager always FC's and if I try and make a call, it goes to a blank screen until the call is hung up (someone said his phone rings but cant hear anything - cant hear sound on my end either.)
Other thing is that in download mode I cant see anything to do with knox - there is no entry for knox at all.
One thing suggested is to download Samsung stock rom and flashing that, then try something else.
Any help appreciated.
Click to expand...
Click to collapse
fLash wanam lite rom based on 4.4.2 and bl and modem from his links..see if it works..u have to flash modem twice or thrice by unchecking auto reboot in odin.
jadajada said:
I have tried out several roms, I have tripped knox and I am on new bootloader.
I am wondering what I can/should do to get a working stock phone again.
Click to expand...
Click to collapse
Did you get your phone working again?? And how?
FelixCited said:
Did you get your phone working again?? And how?
Click to expand...
Click to collapse
Yes, by flashing the leaked 4.4.2 rom through Odin.
When you start flashing in Odin, make sure you get the Green Pass Message by waiting 2 or more minutes.
Don't restart or unplug your phone during the yellow or blue Message.
Samsung galaxy s4 sound failure
I also encountered a sound problem with my s4 gt-i9500 and when i flashed using odin with the .bin files i cannot select both files and even when selecting separately the modem one and continue until the 2minute notfication pops up and failes....please help

Problems going back to stock

Hi,
Was running CM11 on my GS4. I want to go completely back to stock however I'm hitting issues with it.
Downloaded the 02UK firmware file from Samware, flashed it in Odin, did a wipe before and after. Takes a while to boot in each time, sometimes needs a battery pull etc.
Now, I can load up fine - however no matter what I try, wifi won't turn on, a lot of the time signal will drop/ turn off when I lock the screen. Have tried flashing 4.2.2 as well, exactly the same and on the latest flash noticed as issue with the recovery, won't allow a data wipe/ partition in recovery, just flashes something red and then reboots.
I know this has probably been asked a milion times before. But hoping someone can help me get back to stock without the issues!
Thanks in advance.
aholloway21 said:
Hi,
Was running CM11 on my GS4. I want to go completely back to stock however I'm hitting issues with it.
Downloaded the 02UK firmware file from Samware, flashed it in Odin, did a wipe before and after. Takes a while to boot in each time, sometimes needs a battery pull etc.
Now, I can load up fine - however no matter what I try, wifi won't turn on, a lot of the time signal will drop/ turn off when I lock the screen. Have tried flashing 4.2.2 as well, exactly the same and on the latest flash noticed as issue with the recovery, won't allow a data wipe/ partition in recovery, just flashes something red and then reboots.
I know this has probably been asked a milion times before. But hoping someone can help me get back to stock without the issues!
Thanks in advance.
Click to expand...
Click to collapse
Mind giving as More information about this Phone? Such as Model,baseband,Stock roms your were trying to flash and Etc . Cuz we cannot help you If you were like " Help my Phone got No wifi etc." LOL If your asking for help atleast Provide us more Information and such . thank you.
Repulsa said:
Mind giving as More information about this Phone? Such as Model,baseband,Stock roms your were trying to flash and Etc . Cuz we cannot help you If you were like " Help my Phone got No wifi etc." LOL If your asking for help atleast Provide us more Information and such . thank you.
Click to expand...
Click to collapse
Yep - it's the i9505, baseband is 19505XXUBMEA and build number is JDQ39.I9505XXUBMF8.
Hope that helps, let me know if I have missed anything.
Thanks
aholloway21 said:
Yep - it's the i9505, baseband is 19505XXUBMEA and build number is JDQ39.I9505XXUBMF8.
Hope that helps, let me know if I have missed anything.
Thanks
Click to expand...
Click to collapse
Your having a signal issue because you need to flash a diffetent modem mate. And that should fix ur problem on signal issue . Do you mind booting into download mode and check if iy say the entry knox warranty void. Thanks
Sent from Hell ?
Currently 4.2.2 as I read the 4.3 update had caused some of these issues (although I want to be on stock 4.3.
I did notice after I posted that the baseband was for German phones (no idea how that got on there). So I flashed the a new modem and baseband is now at I9505XXUEMK8 which is supposed to be the correct one (if not please advise!?). However Wifi still not working. Tried the wifi fix file for the baseband, didn't work, also tried the root /data/misc/wifi/wpa_supplicant rename fix. Didn't work.
Are you able to tell me which Stock Rom/ Modem etc to flash or anything else to try??
Thanks in advance!
aholloway21 said:
Currently 4.2.2 as I read the 4.3 update had caused some of these issues (although I want to be on stock 4.3.
I did notice after I posted that the baseband was for German phones (no idea how that got on there). So I flashed the a new modem and baseband is now at I9505XXUEMK8 which is supposed to be the correct one (if not please advise!?). However Wifi still not working. Tried the wifi fix file for the baseband, didn't work, also tried the root /data/misc/wifi/wpa_supplicant rename fix. Didn't work.
Are you able to tell me which Stock Rom/ Modem etc to flash or anything else to try??
Thanks in advance!
Click to expand...
Click to collapse
Try to find the right Stock rom from here that base in your country mate and flash it via odin . Like i told you if you boot into download mode and check if there is knox void warranty? If you dont have that flash inly 4.2.2 stock rom but if you see that then feel free to flash a stock 4.3
Ok - So I have flashed the UK 4.3 BTU rom (Jss15J.I9505XXUEMKF) and have a baseband of I9505XXUEMK8 (which was the O2 one). Signal is fine no issues etc.
Still Wifi won't turn on though.
What do I need to do for this bit??
EDIT: As per your last post, I have no idea about Knox? I didn't see anything show up on download mode.
It also doesn't seem to be working now. The rom crashes when calls are received and wont dial etc. Ok - so should I go back and install the earliest 4.2.2 Rom version for 02 as the phone came with? Then update through OTA?
aholloway21 said:
Ok - So I have flashed the UK 4.3 BTU rom (Jss15J.I9505XXUEMKF) and have a baseband of I9505XXUEMK8 (which was the O2 one). Signal is fine no issues etc.
Still Wifi won't turn on though.
What do I need to do for this bit??
EDIT: As per your last post, I have no idea about Knox? I didn't see anything show up on download mode.
It also doesn't seem to be working now. The rom crashes when calls are received and wont dial etc. Ok - so should I go back and install the earliest 4.2.2 Rom version for 02 as the phone came with? Then update through OTA?
Click to expand...
Click to collapse
Well I told you if you dont have an Entry of Knox Warranty Void when you boot into download mode then flash the 4.2.2 Stock rom :S But you already flashed the 4.3 so you can no longer downgrade to 4.2.2 ... Can you please Dial *#1234# and write it down somewhere . and then Download this Wifi Fix and flash it Via odin and After reboot still did not work then Try to download and extract this file and Flash the .tar Via odin by selecting Phone/CP And if this file did not work after flashing then please feel free to play one of the wifi fix from Here Start's from MK9 until MKE might fix your issue.
Thanks for the help Repulsa. Will try that shortly and let you know the results!
EDIT - What about the Rom issues itself? I haven't had a chance to test everything, but I can't make calls. It calls the person but the screen freezes blank and then flickers. Should I reinstall the rom first or use another?
aholloway21 said:
Thanks for the help Repulsa. Will try that shortly and let you know the results!
EDIT - What about the Rom issues itself? I haven't had a chance to test everything, but I can't make calls. It calls the person but the screen freezes blank and then flickers. Should I reinstall the rom first or use another?
Click to expand...
Click to collapse
Do you mind dial *#06# if you have the right imei (dnt type ur imei here) and dial *#1234# and write it down here pls . And try to do a factory reset and wipe cache in rexovery before you flash anything.
Sent from Hell ?
Repulsa said:
Do you mind dial *#06# if you have the right imei (dnt type ur imei here) and dial *#1234# and write it down here pls . And try to do a factory reset and wipe cache in rexovery before you flash anything.
Sent from Hell ?
Click to expand...
Click to collapse
IMEI is the same, except for an extra /1 on the end?? Rest as follows;
AP I905XXUEMKF
CP I9505XXUEMK8
CSC I9505BTUEMK5
Tried everything from you earlier post except going through the final wifi fix versions. Nothing has worked so far though....
I'm in pretty much the boat.... I was using Omega ROM 4.3 but wanted to go back to Stock unrooted firmware.
I flashed Stock 4.3 (XXUEMKF to be precise - both Baseband and Build) using Odin 3.04
Now I cant turn wifi on
When I go into Download mode I dont have any KNOX lines and my Binary is Custom not stock!!!
Don't want to mess things up anymore than I already have by trying to flash everything under the sun!!!!
Back to using my faithful Note 2 for the time being then I guess!!!
Sent from my GT-N7100 using xda app-developers app

HELP my N9005 bugs after I flash stock firmware

DAY 1: My phone bootloops when i flashed a modem. So I flashed a firmware base on my country (Philippines N9005XXUEND6). I used odin 3.09 for flashing, did check the FRESET TIME, AUTOREBOOT, AP BOX and BOOTLOADER UPDATE.. It was successful but on the homescreen, "setup wizard has stopped" flashes on screen so I factory reset via stock recovery, then it runs ok.. Set up is done,. But another problems are:
1. entering camera, it shows black screen then says "warning: camera failed".
2. entering the phone dialler it takes seconds to respond
3. music is freezes
4. unlocking the phone it takes seconds to open
5.wakelock takes seconds also to respond
6. no sound
N9005XXUEND6 is the firmware I flashed.
DAY 2: I flashed a different firmwares XXUEND5, XXUENB4, but i notice that i after flashing, no setup wizard in the homescreen. It is the same settings,wallpaper and i have the messages and conversations in my inbox. It looks like the firmware didnt update but i look up in the baseband and build version it does change.. A friend of mind says that after flashing a firmware setup wizard must pop on the screen but mine doesnt.HELP ME MASTERS.. Im losing hope..
I cant figure out the problem, my drivers is installed, i have the firmwares, odin 3.09, and all required tools for flashing
please help me masters.. I did trying reflash the firware and do the reset, the problem persist.. thanks in advance
I have a similar problem, but I think yours is much more simpler hopefully
You find the data unchanged because you didn't do a factory reset
To do so, turn off your phone then open recovery mode by pressing VOLUME+, HOME & POWER buttons together until it opens
Choose Wipe Data/ Factory Reset --> Yes
then reboot your phone
My phone turned out to have a RAM problem and still haven't fixed it, it will cost me a lot especially that I voided my warranty because I rooted the phone
The same problem exactly!!! And I do all reset severel times! Help us!!!
Garri1980 said:
The same problem exactly!!! And I do all reset severel times! Help us!!!
Click to expand...
Click to collapse
If you could fix it don't forget to tell us about it
BTW I found a post online that says the problem could be due to separated camera from the motherboard
So if you don't have warranty as myself you should get it to maintenance service and tell them to check the camera
moustafaatchy said:
I have a similar problem, but I think yours is much more simpler hopefully
You find the data unchanged because you didn't do a factory reset
To do so, turn off your phone then open recovery mode by pressing VOLUME+, HOME & POWER buttons together until it opens
Choose Wipe Data/ Factory Reset --> Yes
then reboot your phone
My phone turned out to have a RAM problem and still haven't fixed it, it will cost me a lot especially that I voided my warranty because I rooted the phone
Click to expand...
Click to collapse
-i did that also sir but the problem persist..
moustafaatchy said:
If you could fix it don't forget to tell us about it
BTW I found a post online that says the problem could be due to separated camera from the motherboard
So if you don't have warranty as myself you should get it to maintenance service and tell them to check the camera
Click to expand...
Click to collapse
- Sir before i flash the modem, the phone works flawlessly but when it bootloops and i flash a stock firmware the other day the problem began to appear..
ian_drimworld73 said:
- Sir before i flash the modem, the phone works flawlessly but when it bootloops and i flash a stock firmware the other day the problem began to appear..
Click to expand...
Click to collapse
What is your Knox Warranty Void status ?
if it's still 0x0, you should send it to Samsung service
moustafaatchy said:
What is your Knox Warranty Void status ?
if it's still 0x0, you should send it to Samsung service
Click to expand...
Click to collapse
-0x1
ian_drimworld73 said:
-0x1
Click to expand...
Click to collapse
Then I guess your problem is like mine .. it could be hardware related :\
After I installed this ROM I found the camera working but not video camera and still can't play videos but there are no hangs
It still has problems but it sort of confirmed that I have a hardware problem
You need to be rooted
It's an AOSP ROM without Samsung Touchwiz ..
http://downloadandroidrom.com/file/...esurrection_Remix_KK_v5.0.9-20140416-hlte.zip
http://mirror41.downloadandroidrom....ock-4.4.2-20140207-signed.zip?token=866958839
Boot into Recovery .. Do a Factory Reset .. then flash the ROM then the gapps
moustafaatchy said:
Then I guess your problem is like mine .. it could be hardware related :\
After I installed this ROM I found the camera working but not video camera and still can't play videos but there are no hangs
It still has problems but it sort of confirmed that I have a hardware problem
You need to be rooted
It's an AOSP ROM without Samsung Touchwiz ..
http://downloadandroidrom.com/file/...esurrection_Remix_KK_v5.0.9-20140416-hlte.zip
http://mirror41.downloadandroidrom....ock-4.4.2-20140207-signed.zip?token=866958839
Boot into Recovery .. Do a Factory Reset .. then flash the ROM then the gapps
Click to expand...
Click to collapse
-thanks for the info sir.. but i guess its not hardware because i handle the phone carefully and it does not drop on the floor. I will thanks
-go to recovery, wipe data
- go to download mode, reflash via odin
reboot
arinsms said:
-go to recovery, wipe data
- go to download mode, reflash via odin
reboot
Click to expand...
Click to collapse
-I did that several times sir. still no luck
Hey, did you burn plywood the correct version of rum for your device? Moreover, you must make fool wipe, what version you had before making the root? That if there is a 4.3 to try to go back to 4.4.2
Sorry for bed English
Sent from my SM-N900 using XDA Free mobile app
ian_drimworld73 said:
-thanks for the info sir.. but i guess its not hardware because i handle the phone carefully and it does not drop on the floor. I will thanks
Click to expand...
Click to collapse
You said you tried updating the firmware of your region and the problem persists .. You should let someone flash the software using a BOX (not just using odin) (preferably go to Samsung)
if it's not solved then it's most probably a hardware problem .. I didn't drop my phone either but that's not necessary
Same problems with my n9005
ian_drimworld73 said:
DAY 1: My phone bootloops when i flashed a modem. So I flashed a firmware base on my country (Philippines N9005XXUEND6). I used odin 3.09 for flashing, did check the FRESET TIME, AUTOREBOOT, AP BOX and BOOTLOADER UPDATE.. It was successful but on the homescreen, "setup wizard has stopped" flashes on screen so I factory reset via stock recovery, then it runs ok.. Set up is done,. But another problems are:
1. entering camera, it shows black screen then says "warning: camera failed".
2. entering the phone dialler it takes seconds to respond
3. music is freezes
4. unlocking the phone it takes seconds to open
5.wakelock takes seconds also to respond
6. no sound
N9005XXUEND6 is the firmware I flashed.
DAY 2: I flashed a different firmwares XXUEND5, XXUENB4, but i notice that i after flashing, no setup wizard in the homescreen. It is the same settings,wallpaper and i have the messages and conversations in my inbox. It looks like the firmware didnt update but i look up in the baseband and build version it does change.. A friend of mind says that after flashing a firmware setup wizard must pop on the screen but mine doesnt.HELP ME MASTERS.. Im losing hope..
I cant figure out the problem, my drivers is installed, i have the firmwares, odin 3.09, and all required tools for flashing
please help me masters.. I did trying reflash the firware and do the reset, the problem persist.. thanks in advance
Click to expand...
Click to collapse
Hello guys what is described up is happening same to me ... tryied to update firmware from sammobile with a stock firmware Vodafone Romania and Odin show me some new lines when it updates like NON NHUL and a TGZ ZT etc ... suddenly failed to update .. and the phone freezed ... messagge was FAILED to update .. I did a restart and the two comps showed and the text : failed to upgrade firmware etc etc ... try use emergency firmware update trough kies ... restarted V Down +home +power : ) tryied to reinstal my fisrt NC2 Poland firmware succeded but
1. no sound
no camera
no music I guess That is a problem with the new Firmware ?Q? Probably we can ask MR. Chainfire or someone hwo knows ? I tryied all things ... but nothing happened even to restore data from kies /backup/trough Odin reflash old backup with TRP/CWM.
ANY ADVISE ? Never download even from sammobile or sammupdate if they say is ok if you never saw someone hwo succes
NEWS : I've noticed that suddenly when try to update again my Note3 shows only one language Chinese , probably becouse this new update NF at the end is for chinese exinos ????
1.Tryied to install CM last nightlies ...now the device work lmost 90%.
Bugs : No sound yet ...but i can acces settings sounds
E-mail has stoped
When i receive a call the phone shows answer/reject mode ..when i answer the phone become black screen amd keep vibrate.
Trying to call ...the phone call wizard has stoped wait/stop.
Things solved : Again can send and receive sms/mms
Camera works again and flashes
Sec android wizard works ...
Pit file euro open worked. I'm still having problems .
I checked. Again to see ...i tryied to install a singapore firmware nf6 I guess that was the problem.
solved mine
pisicutumic said:
Hello guys what is described up is happening same to me ... tryied to update firmware from sammobile with a stock firmware Vodafone Romania and Odin show me some new lines when it updates like NON NHUL and a TGZ ZT etc ... suddenly failed to update .. and the phone freezed ... messagge was FAILED to update .. I did a restart and the two comps showed and the text : failed to upgrade firmware etc etc ... try use emergency firmware update trough kies ... restarted V Down +home +power : ) tryied to reinstal my fisrt NC2 Poland firmware succeded but
1. no sound
no camera
no music I guess That is a problem with the new Firmware ?Q? Probably we can ask MR. Chainfire or someone hwo knows ? I tryied all things ... but nothing happened even to restore data from kies /backup/trough Odin reflash old backup with TRP/CWM.
ANY ADVISE ? Never download even from sammobile or sammupdate if they say is ok if you never saw someone hwo succes
NEWS : I've noticed that suddenly when try to update again my Note3 shows only one language Chinese , probably becouse this new update NF at the end is for chinese exinos ????
1.Tryied to install CM last nightlies ...now the device work lmost 90%.
Bugs : No sound yet ...but i can acces settings sounds
E-mail has stoped
When i receive a call the phone shows answer/reject mode ..when i answer the phone become black screen amd keep vibrate.
Trying to call ...the phone call wizard has stoped wait/stop.
Things solved : Again can send and receive sms/mms
Camera works again and flashes
Sec android wizard works ...
Pit file euro open worked. I'm still having problems .
I checked. Again to see ...i tryied to install a singapore firmware nf6 I guess that was the problem.
Click to expand...
Click to collapse
-bro my note3 is back.. just flash the singapore latest firmware at flash it via odin your problem will be solved! Godbless
NEWS
ian_drimworld73 said:
-bro my note3 is back.. just flash the singapore latest firmware at flash it via odin your problem will be solved! Godbless
Click to expand...
Click to collapse
I saw now the CSC is XSP this is the only prb but also is csc free no bloatware.also you can root back again and you can restore your old settings except :
1. CSC settings and APP settings that camed with your original firmware
2. when insert your sim back you will be notified to update internet settings to your provider ( for me Vodafone RO) , you can change them back to google.com . is ok THX for your apreciation.

[Q] Wifi lost; Unique problem maybe.

Anyways as my title says, i don't have wifi. I had first rooted my phone, but then I unrooted my phone by flashing some unrooted os on the samsung which caused two problems. My wifi and mobile data didn't work at all, but after I took it to a repair shop they fixed the mobile data and got it working again and rooted my phone but not the wifi part. According to the person that tried to fix my phone, the current android os, 4.3 - jellybean, that i flashed via odin is preventing the wifi from working. I don't really know whats wrong with the phone but can anyone help me? Also by baseband version is 1337UCUFNJ4 and the build number is JSS15.1337UCUEMK2. Should i try to find a ROM that matches my baseband version and flash it via odin? Thank you in advance!
P.S. This is my first thread, so please tell me if i violated any rules.
aldrichk said:
Anyways as my title says, i don't have wifi. I had first rooted my phone, but then I unrooted my phone by flashing some unrooted os on the samsung which caused two problems. My wifi and mobile data didn't work at all, but after I took it to a repair shop they fixed the mobile data and got it working again and rooted my phone but not the wifi part. According to the person that tried to fix my phone, the current android os, 4.3 - jellybean, that i flashed via odin is preventing the wifi from working. I don't really know whats wrong with the phone but can anyone help me? Also by baseband version is 1337UCUFNJ4 and the build number is JSS15.1337UCUEMK2. Should i try to find a ROM that matches my baseband version and flash it via odin? Thank you in advance!
P.S. This is my first thread, so please tell me if i violated any rules.
Click to expand...
Click to collapse
im having the same problem and i think we both have knox stupid security back on the phone that's blocking the wlan to start from bad permission or encryption
so personally yeah i will install back the original firmware (before 4.3) from factory reset (or via odin if i have to force it) then im gonna re-root the phone
having back permission ill remove knox (probly with titanium) lock and box bs from base firmware and probly remove root right
then im guessing ill have my internet back now will i go full rom again or basic function thats a good question
so many freaking remote exploit lately
ill let you know if that fix it
I also just found this
om22 said:
1. untick "Auto reboot" in odin
2. flash the stock rom again
3. reboot your phone to download mode again (by holding the power and vol down button for 10 sec)
4. flash the stock rom a second time with auto reboot ticked
This will fix your problem.
Click to expand...
Click to collapse
seems that clicking auto reboot might be the cause
so would i install the I337_NJ4_Stock_Kernel.tar.md5 file following that method or would i have to find another firmware/rom/(i don't know what to call this) unrooted
aldrichk said:
so would i install the I337_NJ4_Stock_Kernel.tar.md5 file following that method or would i have to find another firmware/rom/(i don't know what to call this) unrooted
Click to expand...
Click to collapse
official did not work for me
i the flashed / reset to factory for Galaxy S4 SGH-I337M VLUAMDJ
rebooted and prayed but no luck
finally found a solution but that did changed my PDA version to 9505 but got everything working again
so if you dont mind the 9505 change (more rom and solution for 9505) id go with echoes for all in 1 fresh install solution and its a nice rom
Instruction can be found on this thread : http://forum.xda-developers.com/showthread.php?t=2372286
knowing the problem was modem i did also found this solution to re-flash and fix wifi on i337 without changing to 9505
Follow these instruction to stay i337 : http://forum.xda-developers.com/showpost.php?p=46762296&postcount=1
but i have not tested for i337
in the end i got this setup
rom echoes illusion kot 49h
kernel : 3.4.103-aelkernel-v6.2
bootloader and baseband i337mvlufnc1
pda :i9595v jughn2
hardware/ board : qcom/msm8960
platform / chip : msm8960 / apq9064
modem /board : mdm9215m
hope that help
and sorry for bad english http://cdn4.xda-developers.com/images/icons/icon8.gif
EDIT PS: These solution require basic knowledge with odin flash and cwm recovery or twrp recovery

Categories

Resources