Related
I'm not responsible for what might happen on your phone if you choose to dial any of these!
These are the codes that work on the standard phone dialler app on the Orange San Francisco, but I'm pretty sure they'll be almost identical on other models that we collectively know as "ZTE Blade". Known small differences (in texts) are down to whether the firmware expects to be running on an OLED or TFT display, and whether you've deleted seemingly unused apps like ChiperTest.apk, fcctest.apk and QcNvTest.apk. Most are prefixed with "*983*", which is "*ZTE*" in phone letters -- I've added a mnemonic for the other part where I think it's obvious (feel free to suggest better ones!).
"Automatic Inspection" runs through the basic tests automatically (usually you need press a button to move on to the next bit -- don't get thrown by any blank colour test screens!). There are a number of interesting items for developers, with hardware info and other goodies. If any of the descriptions don't make the function obvious then it's either poorly written or I don't know exactly what it does (I'll happily update this if others can explain better).
If the code has been recognised by the dialler then it will react immediately when you enter the final "#". If nothing happens when you've done that, don't press Dial!
Edit: on the ROMs based on the Japanese 2.2 you need to put the phone into "Engineering Mode" first, by dialling *ZTE*OPENEM# (*983*673636#) -- this action will be confirmed by a quick pop-up. To close this mode, dial *ZTE*CLOSEEM# (*983*2567336#) -- this then prompts whether you want to do a Factory Reset, which you do not have to do (you can simply Back away from this screen).
Dial Mnemonic Operation
*983*0# Menu (20:Battery/OLED/Back Light/Vibrator/Ringer/LED/Key/OLED off/SD/BT address/Radio Info/Memory/TouchPaint Test/Audio Loop/FM/Camera/GPS Test/IMEI/IMSI)
*983*3640*01# IMSI
*983*25# Battery Info[/COLOR]
*983*31# OLED Test
*983*26# Backlight Test
*983*850# Radio Test 0
*983*86# Vibrator & LED Test
*983*84# Ringer Test
*983*07*01# Headset Test
*983*07*02# Key Test
*983*3470# LCD Test
*983*81# SD Test
*983*890# -
*983*26*# Radio Test 1
*#06# IMEI
*983*27274# CRASH Reboot
*#08# Test Flag [Note: requires QcNvTest.apk in /system/app]
*#09***# BT Test
*983*1275# _ASK Dev Info
*983*7# Menu (4:Version/IMEI/IMSI/BT address)
*983*3640# DOH+ Phone Info (inc ping test, radio on/off)
*983*636# MEM Memory Test
*983*28# BT Emode BT Test
*983*477# GPS GPS Test
*983*21# Audio Loop Test
*983*70# Automatic Inspection
*#18# LED Test
*#19# TouchPaint Test
*983*36# FM FM Test
*983*57# Factory Reset
*983*473# Camera
*#23# Video Camera
*983*10# Delete (Touchscreeen) Calibration File
*#25# FM Test
*983*2726# SIM Contacts Op 1
*983*37# SIM Contacts Op 2
*983*6726# SIM Contacts Op 3
*983*154# "test" Menu (12:Self-starting/Software
Version/Hardware Version/PSN/Test Flag/[Completed]/Board Serial/Bluetooth
Address/SMS security/SMS Registration Status/Flash Type/PRL Version/Serial Configuration)
*983*07# Menu (9LED/Ringer/Vibrator/Key Test/Audio Loop/Headset Test/FM/Camera/SD)
*983*5182# Dev Info
*983*7469# SHOW Automatic Inspection
*#26***# Sensor Test
*983*7936# QXDM Save Qxdm in log system
*987*0# Menu (4roduce Information[->"test" Menu]/Automatic Inspection/Factory data reset/Battery information)
*#27***# Compass Test
*983*87274# USBSI USB Switch Test
*983*06# BT Test
*983*564738# LOGSET LOG Set (inc sys_rw)
*983*93# FCC Test [Note: requires fcctest.apk in /system/app]
*983*2377# CFQP Call Forwarding Query with PowerOn
*983*24474636# CHIPINFO Chiper Test (chip info) [Note: requires
ChiperTest.apk in /system/app]
*983*29873283# AXUPDATE Touchscreen Updater
*983*73564# SDLOG SD Log
Note: the above are for the standard ROM (well, apps) running 2.1. The current Froyo ROM (with standard dialler, etc.) does not have the Touchscreen Updater, but adds:
Dial Operation
*987*123456# DM Test
IN modaco
Hello, what code shude I use to know if my SF is TFT or Amoled?
Regards!
Check the build number in Settings>About Phone. AMOLED ends in 05, LCD ends in 08. IIRC all white SF models are 08 and most grey are 05 (unless its a newer unit which will likely be 08).
Thank´s man.
Mine is 01. What that means?
Looking at the screen characteristics it seems like LCD.
Thanks man. great post
Really nice. Works on Boost Mobile Warp Sync N9515.
Would you happen to have a code that forces prompt for unlock? (Changing sim cards doesn't trigger anything)
same here... up for this....
No Boost Mobile ZTE Warp Sync N9515 Unlock Screen
chinnyss said:
same here... up for this....
Click to expand...
Click to collapse
I think unlocking the Boost Mobile is a lost cause. I've tried several other sims and the only codes I've found to show the unlock menu don't work:
1) Alright then please remove the SIM card and try this code ###825*09#,
2) Got the prompt for code? Please enter the code you received,
3) Failed above, try *983*8284# to access the Unlock Menu,
4) Failed above, finally try *983*865625# to access the Unlock Menu.
zte warp elite n9518 rooted but still i can't use MSL reader or alogcat it says in root checker verify root congrats and after rebooting i got to root again please help just need to get SPC and or MSL code
You the MAN! THA KS.
kelvinpacquette said:
zte warp elite n9518 rooted but still i can't use MSL reader or alogcat it says in root checker verify root congrats and after rebooting i got to root again please help just need to get SPC and or MSL code
Click to expand...
Click to collapse
Can u tell me rhat what do i need to enable usb debigging or adb mode ?? I have to connect my zte z982 device to miracle sodtware, but unable to connect because frp lock.
I cant enable usb debugfing
techeligible3322 said:
Can u tell me rhat what do i need to enable usb debigging or adb mode ?? I have to connect my zte z982 device to miracle sodtware, but unable to connect because frp lock.
I cant enable usb debugfing
Click to expand...
Click to collapse
Edit: on the ROMs based on the Japanese 2.2 you need to put the phone into "Engineering Mode" first, by dialling *ZTE*OPENEM# (*983*673636#) -- this action will be confirmed by a quick pop-up. To close this mode, dial *ZTE*CLOSEEM# (*983*2567336#) -- this then prompts whether you want to do a Factory Reset, which you do not have to do (you can simply Back away from this screen).
Dialing the first set of numbers made it possible for me to turn on abd....
Sent from my SM-G550T using Tapatalk
Alright
paigesdavis1996 said:
Edit: on the ROMs based on the Japanese 2.2 you need to put the phone into "Engineering Mode" first, by dialling *ZTE*OPENEM# (*983*673636#) -- this action will be confirmed by a quick pop-up. To close this mode, dial *ZTE*CLOSEEM# (*983*2567336#) -- this then prompts whether you want to do a Factory Reset, which you do not have to do (you can simply Back away from this screen).
Dialing the first set of numbers made it possible for me to turn on abd....
Sent from my SM-G550T using Tapatalk
Click to expand...
Click to collapse
Thank you for your reply
How did you enter / enable adb? I have a 971 and the 2nd code from your site doesn't work, I am able to enable eng. mode
I also tried the connect to computer in control panel and that doesn't do anything either.
Frp locked
Trick
techeligible3322 said:
Thank you for your reply
Click to expand...
Click to collapse
This worked for me and I have the ZTE z blade max thank you
Has this been proven to root the phone yet ? Please leave feedback .
Good News
#Starlord37# said:
This worked for me and I have the ZTE z blade max thank you
Click to expand...
Click to collapse
That's very good to know you are welcome
I haven't had a chance to try it fully yet as I have been trying to root my girlfriends Moto e4 with magisk which I will probably have done by the end of the night and then I plan to tackle my z982 will keep you posted though
Hi,
Got this spaking i9505 s4, but it seems the *#197328640# service mode is missing, im using this mode to select wcdma band, In my S2 it is there.
Did samsung removed : *#197328640#, if yes how do we access wcdma select band?
Also *#2263# is not working
Thanks,
Roy
Same problem here!
Service mode:
*#0011#
Options*--> back
Options -->key input -->1
Black screen with number 1 up on the left
buy samsung service mode apk
buy samsung service mode apk from the play store
bernny26 said:
buy samsung service mode apk from the play store
Click to expand...
Click to collapse
Service mode is not working, I can get in to what says service mode but then back does not work abd it stuck in some sort active data mode.
docurley said:
Service mode is not working, I can get in to what says service mode but then back does not work abd it stuck in some sort active data mode.
Click to expand...
Click to collapse
I did read that its modem related?
this post says so?
http://forum.xda-developers.com/showpost.php?p=42550422&postcount=3539
rodnah said:
I did read that its modem related?
this post says so?
http://forum.xda-developers.com/showpost.php?p=42550422&postcount=3539
Click to expand...
Click to collapse
Well I tried the modem reflash and still no Service mode just the same old screen shot each time.
docurley said:
Well I tried the modem reflash and still no Service mode just the same old screen shot each time.
Click to expand...
Click to collapse
Did you manage to solve this? I'm stuck at the same point. Menu -> back doesn't do anything at all.
TY
squaredd said:
Did you manage to solve this? I'm stuck at the same point. Menu -> back doesn't do anything at all.
TY
Click to expand...
Click to collapse
No I did not I ended up selling the phone as I wanted to change networks but I could not unlock the pjone.
Ei.. any fix for this?
i BELIEVE this is part of Samsung's "business strategy".. i was resolve this using the Samsung Service Mode apk (which I cracked and patched :highfive, however i have another issue related to this (see attached pic)!
In this case...may i ask if anyone from XDA knows the secret code for the UMTS Menu for me to access the Network Unlock menu???
RESOLVED thru SERENDIPITY!
mrryanangeles16 said:
i BELIEVE this is part of Samsung's "business strategy".. i was resolve this using the Samsung Service Mode apk (which I cracked and patched :highfive, however i have another issue related to this (see attached pic)!
In this case...may i ask if anyone from XDA knows the secret code for the UMTS Menu for me to access the Network Unlock menu???
Click to expand...
Click to collapse
Hi XDA Peeps!
I was able to unlock my i9505!
I just did the following steps:
1. Dial *#0011# via Phone Utility apk [Phone Connectivity Status will appear (via Service Mode)];
2. Tap on the left soft key (LSK) and select Key Input > Enter 1 > Hit OK;
3. Tap on the LSK and select BACK [You're now just a few steps away!];
4. Tap on the LSK and select Key Input > Enter 1 > Hit OK [Your screen shall have a different output now (i.e., a single digit "1" on line 1)];
5. WAIT for 5 seconds until the UMTS MAIN MENU appears > Select Debug Screen > Select Phone Control > Select Network Lock;
6. Next, tap on: [3] PERSO SHA256 OFF;
7. From here, go back to the UMTS MAIN MENU by tapping on Menu (left soft key on SGS4) and selecting Back from the options;
8. Once you are in the UMTS menu, tap on: [6]COMMON;
9. There, select: [6]NV REBUILD;
10. Now in the NV Rebuild menu, tap on: [4] Restore Back-up;
11. Samsung Galaxy S4 will now go into a temporary freezing state. After a while you’ll see some activities. The screen will be black and the LED will turn Blue. The Menu and Back key button on phone will also light;
12. Lastly, your Samsung Galaxy S4 will reboot automatically and will take a minute or two in booting up (depending on your ROM's Boot Animation);
BOOM! Your Galaxy S4 GT i9505 is now SIM-unlocked! Try a SIM card from another carrier to confirm the process and do not forget to share this to your friends too!
XDA_AndioAngeles
FB: facebook.com/rmasr.angeles
Does not work on samsung secure boot devices
mrryanangeles16 said:
Hi XDA Peeps!
I was able to unlock my i9505!
I just did the following steps:
1. Dial *#0011# via Phone Utility apk [Phone Connectivity Status will appear (via Service Mode)];
2. Tap on the left soft key (LSK) and select Key Input > Enter 1 > Hit OK;
3. Tap on the LSK and select BACK [You're now just a few steps away!];
4. Tap on the LSK and select Key Input > Enter 1 > Hit OK [Your screen shall have a different output now (i.e., a single digit "1" on line 1)];
5. WAIT for 5 seconds until the UMTS MAIN MENU appears > Select Debug Screen > Select Phone Control > Select Network Lock;
6. Next, tap on: [3] PERSO SHA256 OFF;
7. From here, go back to the UMTS MAIN MENU by tapping on Menu (left soft key on SGS4) and selecting Back from the options;
8. Once you are in the UMTS menu, tap on: [6]COMMON;
9. There, select: [6]NV REBUILD;
10. Now in the NV Rebuild menu, tap on: [4] Restore Back-up;
11. Samsung Galaxy S4 will now go into a temporary freezing state. After a while you’ll see some activities. The screen will be black and the LED will turn Blue. The Menu and Back key button on phone will also light;
12. Lastly, your Samsung Galaxy S4 will reboot automatically and will take a minute or two in booting up (depending on your ROM's Boot Animation);
BOOM! Your Galaxy S4 GT i9505 is now SIM-unlocked! Try a SIM card from another carrier to confirm the process and do not forget to share this to your friends too!
XDA_AndioAngeles
FB: facebook.com/rmasr.angeles
Click to expand...
Click to collapse
This method does not work if your base band has been upgraded to I9505XXUBMG7 wish i had know what samsung was planning i would of done the unlock before upgrading. oh well the power of hind sight i suppose :crying:
I tried this...but when I put in the (star) #0011# the next screen says
"No Service"...what does that mean?
dorian2kx said:
I tried this...but when I put in the (star) #0011# the next screen says
"No Service"...what does that mean?
Click to expand...
Click to collapse
Same problem. Did you manage to sort this?
bump
any resolution? I get {connection problem or code MMI not valid}
UMTS Never appears for me unless I do this on my i545
Enter Phone Menu ..
* # 27663368378 #
[1] UMTS
[2] DEBUG
[6] PHONE CONTROL
[6] NETWORK LOCK
[3] PERSOSHA256 OFF
On this step off #3 is not a choice for me
MENU> BACK 3 TIMES .. [UMTS MAIN MENU]
[6] COMMON
[6] NV REBUILD
If it says GOLDEN-BACKUP exists ..
[4] RESTORE BACK-UP
any assistance is greatly appreciated
i545
Enter Phone Menu ..
* # 0011 #
press [menu]
press back
press [menu]
press key input
press Q
press [menu]
press 0000
wait for 30 seconde
winny57 said:
Enter Phone Menu ..
* # 0011 #
press [menu]
press back
press [menu]
press key input
press Q
press [menu]
press 0000
wait for 30 seconde
Click to expand...
Click to collapse
Improved your post. Worked for me, thanks!
*#0011#
Press [MENU]
press [Back]
press [MENU]
Press [Key Input]
Input [Q]
press [MENU]
Press [Key Input]
Input [0000]
Wait 30 Seconds.
If you get "0", exit the ServiceMode and restart.
no probleme
Still nothing on i545
The magic *#197328640# does not have "phone control" menu ary more...
*#9090# works.
Sent from my SAMSUNG-SGH-I337 using xda premium
Phoneguy589 said:
*#9090# works.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Where should I go in this menu? Selected the first [1] menu, now the phone starts "Blocking mode" what's this???
First hit menu then back. Then I hit menu-select-4 and and then hit menu then back and it gives me a list of options. Never messed around in there but I just looked around to see what was there. I tried 1,2,3 and phone just rebooted but nothing really happened.
Sent from my SAMSUNG-SGH-I337 using xda premium
Hm...
I do *#9090# and see:
DIAG CONFIG
[1]DM/DUM over HS-USB[]
[2]DM/DUM over HSIC[]
[3]DM/DUN/RmNET over HSUSB[]
[4]DM over UART(*)
[5]DBG MSG ON(*)
[6]DBG MSG OFF(*)
Could someone check what the defaults are?
Ok did the sequence and found it
What is "blocking mode enabled"? Did I push something wrong?
These are what I see
Sent from my SAMSUNG-SGH-I337 using xda premium
Phoneguy589 said:
These are what I see
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Thanks I got it!
I need to see the very first screen:
DIAG CONFIG
Ok for everyone here is the FULL SEQUENCE:
*#9090#->MENU->Back-> [4]DM over UART()->MENU->Back->[1]UMTS->[1]DEBUG SCREEN->[6]PHONE CONTROL->[6]NETWORK LOCK->[3]PERSO SHA256 OFF->MENU->END
Is access to this useful at all?
Sent from my SAMSUNG-SGH-I337 using xda premium
Yes got it unlocked! Thanks a bunch.
Sweet! Is there a way to verify if it is unlocked now? NM, I was thinking of bootloader unlock...doh.
Sent from my SAMSUNG-SGH-I337 using xda premium
Tried it and it didn't work after put in my tmobile sim.
Tried it and verified that Perso SSH 256 was off and when i popped another carrier sim, it still said sim locked. Caved in and purchased the unlock code form cellunlocker.
p.S: Don't forget to switch Perso SSH 256 back to ON if you want to unlock it via cellunlocker code
Tried it as well and didn't work. So used unlock code.
Thanks @mikron15 for letting me know to turn SSH 256 back on as I was getting unlock unsuccessful.
tried it as well with no success... any other suggestions?
Phoneguy589 said:
Sweet! Is there a way to verify if it is unlocked now? NM, I was thinking of bootloader unlock...doh.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Stick in the T-Mobile SIM card
When I try to turn SSH back on it automtically reboots afer I press the button initial option 4 on the service menu. I cant get back to switch to on. What qm I doing wrong?
Thanks!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
here is a sim unlock that might work for us becuase it works on the T-Mobile S4.
How to SIM unlock Samsung Galaxy S4 SGH-M919 (tested - works)
Hi Everyone,
I'm a long time lurker and benefited greatly from the postings here at xda.
So I'd like to contribute something back.
After trying many methods and reading all the posts in the various S4 forums, I finally found a way for SIM unlock that works for me.
I have tested it, and it works on my T-Mobile S4.
Credit to these posts:
KaneHusky's post for the dialer code
This thread on how to unlock
chavxxx's post pointing to the right final step
Here are the steps:
Goto phone dailer, and enter *#27663368378# for the debug service menu.
In "ServiceMode", select [1] UMTS
In "UMTS MAIN MENU", select [1] DEBUG SCREEN
In "DEBUG SCREEN", select [6] PHONE CONTROL
In "PHONE CONTROL", select [6] NETWORK LOCK
In "NETWORK LOCK", select [3] PERSO SHA256 OFF
It should show:
SHA256_ENABLED_FLAG[1]
SHA256_OFF => SHA256_ON
Now touch the first line SHA256_ENABLED_FLAG[1]
It should show:
MENU NOT EXIST
PRESS BACK KEY
Current Command is 116631
Now press the menu button and select "Back"
It should show:
SHA256_ENABLED_FLAG[0]
SHA256_OFF => Not Change
Again, press the menu button and select "Back", and you're back in the "NETWORK LOCK" screen
Press the menu button and select "Back", and you're in the "PHONE CONTROL" screen
Press the menu button and select "Back", and you're in the "DEBUG SCREEN" screen
Finally, press the menu button and select "Back", and you're back in the "UMTS MAIN MENU" screen
Select [6] COMMON
In "COMMON" screen, select [6] NV REBUILD
Now you are in the "NV REBUILD" screen, you should see the following text:
------------------------------
Golden-Backup exist
You can Restore Cal/NV
------------------------------
Now for the final step.
In "NV REBUILD" screen, select [4] Restore Back-up
The button lights for menu and back should come on, and the phone will auto reboot in a few seconds.
Note: chavxxx's post of selecting "[1] Load default NV" DID NOT work for me.
Congratulations, your phone is now unlocked.
Stick in a sim card from a different carrier and try it out.
Please post followups of your experience with this unlock method.
Thanks, and good luck!
her is a link to kaleido How to SIM unlock Samsung Galaxy S4 SGH-M919 (tested - works)
http://forum.xda-developers.com/showthread.php?t=2283068
killer5000 said:
here is a sim unlock that might work for us becuase it works on the T-Mobile S4.
How to SIM unlock Samsung Galaxy S4 SGH-M919 (tested - works)
Hi Everyone,
I'm a long time lurker and benefited greatly from the postings here at xda.
So I'd like to contribute something back.
After trying many methods and reading all the posts in the various S4 forums, I finally found a way for SIM unlock that works for me.
I have tested it, and it works on my T-Mobile S4.
Credit to these posts:
KaneHusky's post for the dialer code
This thread on how to unlock
chavxxx's post pointing to the right final step
Here are the steps:
Goto phone dailer, and enter *#27663368378# for the debug service menu.
In "ServiceMode", select [1] UMTS
In "UMTS MAIN MENU", select [1] DEBUG SCREEN
In "DEBUG SCREEN", select [6] PHONE CONTROL
In "PHONE CONTROL", select [6] NETWORK LOCK
In "NETWORK LOCK", select [3] PERSO SHA256 OFF
It should show:
SHA256_ENABLED_FLAG[1]
SHA256_OFF => SHA256_ON
Now touch the first line SHA256_ENABLED_FLAG[1]
It should show:
MENU NOT EXIST
PRESS BACK KEY
Current Command is 116631
Now press the menu button and select "Back"
It should show:
SHA256_ENABLED_FLAG[0]
SHA256_OFF => Not Change
Again, press the menu button and select "Back", and you're back in the "NETWORK LOCK" screen
Press the menu button and select "Back", and you're in the "PHONE CONTROL" screen
Press the menu button and select "Back", and you're in the "DEBUG SCREEN" screen
Finally, press the menu button and select "Back", and you're back in the "UMTS MAIN MENU" screen
Select [6] COMMON
In "COMMON" screen, select [6] NV REBUILD
Now you are in the "NV REBUILD" screen, you should see the following text:
------------------------------
Golden-Backup exist
You can Restore Cal/NV
------------------------------
Now for the final step.
In "NV REBUILD" screen, select [4] Restore Back-up
The button lights for menu and back should come on, and the phone will auto reboot in a few seconds.
Note: chavxxx's post of selecting "[1] Load default NV" DID NOT work for me.
Congratulations, your phone is now unlocked.
Stick in a sim card from a different carrier and try it out.
Please post followups of your experience with this unlock method.
Thanks, and good luck!
her is a link to kaleido How to SIM unlock Samsung Galaxy S4 SGH-M919 (tested - works)
http://forum.xda-developers.com/showthread.php?t=2283068
Click to expand...
Click to collapse
Can't verify with the SIM card yet but the sequenses worked for S4.
What are the additional steps for S3?
I can't test because I got my sim unlock all ready by paying 25 for it when the phone came out
Sent from my SAMSUNG-SGH-I337 using xda premium
I followed the SIM unlock method, and it worked for my Bell S4.
Made a Mistake with Service Mode, LTE 4G is Down : I tried some option in Service Mode, and now i lost my LTE 4G Connexion…:crying:
The Problem Origin :
https://goo.gl/VdePqr
Problem Solved by crackerhk ! Many Thanks :laugh::good: Another Power Force of XDADev !:fingers-crossed:
crackerhk said:
Hello, I just got the same problem with you which enable the xxxx ing Band 4 LTE and loss the 4G signal, just find out the following solutions and you will get back the 4G signal again:
The first step in dial-up interface,
enter * # 0011 # into the Service Mode,
then menu key and click Back,
then click on the Menu key, KeyInput uppercase Q,
then the Menu key KeyInput enter 0000,
And wait a few seconds to enter the MAIN MENU
screen Select (1) UMTS
then select (6) COMMON
then select NV REBUILD
then select (1) NV REBUILD
then select (1) SYSTEM STATIC ONLY,
then restart the phone,
-----------------------------STEP 2---------
restart the complete re-entered the mobile phone MAIN MENU screen (you can repeat the above steps),
select (1) UMTS
Select (1) DEBUG SCREEN
Select (8) PHONE CONTROL
Select (7) NETWORK CONTROL
Select (2) BAND SELECTION
Select (1) Automatic (*)
Click to expand...
Click to collapse
An Idea ?
Have you tried a factory reset or Reflashing the firmware over the current one?
Sent From My Samsung Galaxy Note 3 N9005 Using Tapatalk
No, I wait if another way can be founded
If not, I begin saving process and take time for re flash & root and long reinstall reconfig
I reflash official rom and anything chage, i'm affraid
anyone can help me ?
Is your IMEI correct ??
JJEgan said:
Is your IMEI correct ??
Click to expand...
Click to collapse
Any change, the same on the Phone buy box...
And all other band functionning... 3G H+ Edge ...
Always blocked, I try lot of things... (Update Pics on first post)
may b nv problem
Did u try a nv data restore or you can unlock frequency bands with qpst.
Hello, I just got the same problem with you which enable the xxxx ing Band 4 LTE and loss the 4G signal, just find out the following solutions and you will get back the 4G signal again:
The first step in dial-up interface, enter * # 0011 # into the Service Mode, then menu key and click Back; then click on the Menu key KeyInput input uppercase Q, then the Menu key KeyInput enter 0000, and wait a few seconds to enter the MAIN MENU screen Select (1) UMTS then select (6) COMMON then select NV REBUILD then select (1) NV REBUILD then select (1) SYSTEM STATIC ONLY, then restart the phone, restart the complete re-entered the mobile phone MAIN MENU screen (you can repeat the above steps), select (1) UMTS Select (1) DEBUG SCREEN selection (8) PHONE CONTROL and select (7) NETWORK CONTROL select (2) BAND SELECTION Select (1) Automatic (*)
crackerhk said:
Hello, I just got the same problem with you which enable the xxxx ing Band 4 LTE and loss the 4G signal, just find out the following solutions and you will get back the 4G signal again:
The first step in dial-up interface, enter * # 0011 # into the Service Mode, then menu key and click Back; then click on the Menu key KeyInput input uppercase Q, then the Menu key KeyInput enter 0000, and wait a few seconds to enter the MAIN MENU screen Select (1) UMTS then select (6) COMMON then select NV REBUILD then select (1) NV REBUILD then select (1) SYSTEM STATIC ONLY, then restart the phone, restart the complete re-entered the mobile phone MAIN MENU screen (you can repeat the above steps), select (1) UMTS Select (1) DEBUG SCREEN selection (8) PHONE CONTROL and select (7) NETWORK CONTROL select (2) BAND SELECTION Select (1) Automatic (*)
Click to expand...
Click to collapse
Thanks for your MP & Post:good::good::good:, I send my device at repair service, after 5 sending and 4 months to support service, and mother board changed, the problem was sold !
But this method can early solve the problem :highfive:
Thanks
crackerhk said:
Hello, I just got the same problem with you which enable the xxxx ing Band 4 LTE and loss the 4G signal, just find out the following solutions and you will get back the 4G signal again:
The first step in dial-up interface, enter * # 0011 # into the Service Mode, then menu key and click Back; then click on the Menu key KeyInput input uppercase Q, then the Menu key KeyInput enter 0000, and wait a few seconds to enter the MAIN MENU screen Select (1) UMTS then select (6) COMMON then select NV REBUILD then select (1) NV REBUILD then select (1) SYSTEM STATIC ONLY, then restart the phone, restart the complete re-entered the mobile phone MAIN MENU screen (you can repeat the above steps), select (1) UMTS Select (1) DEBUG SCREEN selection (8) PHONE CONTROL and select (7) NETWORK CONTROL select (2) BAND SELECTION Select (1) Automatic (*)
Click to expand...
Click to collapse
Thanks thanks a lot
I have had this problem since 2 years and can't solve it, also all Technical Engineers in my city can't. after that I gave up and use H+ until today I found your post that help me to solve this problem
I am so happy
I have signed up today to Thank you.
thanks again
MMS1912001 said:
Thanks thanks a lot
I have had this problem since 2 years and can't solve it, also all Technical Engineers in my city can't. after that I gave up and use H+ until today I found your post that help me to solve this problem
I am so happy
I have signed up today to Thank you.
thanks again
Click to expand...
Click to collapse
Wonderfull ! this forum is awesome for found solution in very big problems since so many years !
Hello everyone. It's been heavily requested that I create a guide on how to program the values I provided in one of the posts on my previous boot image thread into the Boost Desire 626S modem so I decided to take the job into my own hands for your convenience.
First you will need QPST, QXDM, and the modem diag usb driver if it is not already installed on your computer. Here are the links:
QPST:
https://www.sendspace.com/filegroup/XynIcslf8H6Qm2TsJ5z4ZEocT85CdvbS
QXDM:
https://www.sendspace.com/filegroup/XynIcslf8H6Qm2TsJ5z4ZEocT85CdvbS
DIAG DRIVER:
https://www.sendspace.com/filegroup/XynIcslf8H6Qm2TsJ5z4ZEocT85CdvbS
1 --- INSTALLING SOFTWARE / DRIVERS
Run QPST.2.7.425 from the QPST folder in the QPST.zip archive and install it by clicking next through the dialog box at each step.
Run QXDMInstaller from the QXDM folder in the QXDM.zip archive and install it by clicking next at each step as well.
Run HTC CDMA LTE DIAG Modem Driver v3.0.2.0 from the inside the DIAGDRIVER.zip archive and you've got everything you need to now program the Boost Desire 626S modem.
2 --- SETTING UP USB DEBUGGING
---First you will need to enable usb debugging.
---Connect your Desire 626S to a usb port on your computer.
---Open the settings app and scroll to about and select it.
---Next, select software information then select more and tap on build number 7 times.
---This will enable access to Developer Options in the settings app.
---Tap back three times and you will now see developers options as selectable in the settings app.
---Tap on developer options and scroll down a bit to USB debugging option.
---Make sure it has a blue checkmark next to it so it is enabled.
3 --- SETTING UP DIAG USB ACCESS
---Now we will enable usb diag access to allow communications with QPST/QXDM.
---On your computer with the phone still connected, open a command prompt as administrator and type adb shell then hit enter.
---Or if you are using minimal adb and fastboot installation, open the shortcut for it as administrator and type adb shell then hit enter.
---On your phone, tick the box next to always allow and tap ok.
---You might have to type in adb shell again and hit enter.
---Do so and you will see [email protected]_a32ewhl:/ $ at the prompt which means you have shell access.
---Now we need root shell access.
---With the shell access, type in su and hit enter.
---Allow the root access for adb shell in the supersu prompt that pops up on your phone.
---You will now see [email protected]_a32ewhl:/ # in the command prompt window.
---Congrats you now have root access.
---With root shell access type this in and hit enter in the command prompt window:
echo 1 > /sys/devices/virtual/android_usb/android0/f_diag/func_en
---You might hear a ding and you have now enabled diag access to use QPST/QXDM in order to program the modem.
4 --- SETTING UP MODEM DIAG COMMUNICATION
---To open QXDM, click the orb in the bottom left hand corner to open the start menu and then click all programs.
---Scroll to QXDM Professional and click it and then click the next QXDM Professional shortcut under it.
---QXDM will now open so now it's time to access the diag port to the modem.
---Click on options in the bar towards the top of the window and then click on communications.
---Under target port, click on the box that says disconnect and click on the available COM port whether it might be COM1-5 then click ok.
5 --- PROGRAMMING MODEM NV ITEM VALUES
---Now we are down to the nitty gritty, actually programming the values for the bands in the modem. It is actually quite easy to do if you figure out what needs to be done.
---Click on the box next to view on the second bar down and click on the NV browser option to open it.
---In the NV browser window you will see some of the first typical NV items that might be included in a modem firmware but we are looking for the certain ones we want to edit to change bands and functionality.
---Left click the up and down arrows on the scroll bar and hold the left mouse button to slowly scroll from item value to item value if you need to, and slowly drag the knob on the scroll bar up and down if you require quicker navigation through the NV items.
---Once you reach an NV item you want to change, for instance, item 1877, click it and in the box under fields section you will see the input field used to change the following value field are both 0, followed by the respective nv items true name.
---To retrieve the content of each field for item 1877 or any nv item, click the read button in the bottom right hand side of the nv browser window, and you will be presented with the fields contents.
---For example NV item 1877 has a default value field content of 78135687 on my Boost Desire 626S so input field is also the same but this input field is what we change.
---Click the value under input once to select it then click it again and it will be editable with the caret blinking and 78135687 highlighted.
---Type in or copy and paste the value you wish to use for the value field in this input field once it is highlighted then hit enter on the keyboard and click write in the bottom right hand side of the window to make the new value stick.
---Congrats you have changed the value for an NV item.
---After writing new values, click offline in the bottom right hand side of the nv browser and wait 5 seconds.
---You will see the signal bar on your phone go blank.
---Click reset and the signal on your phone will be restored.
---Follow these last few steps when writing new values to ensure they stick.
---Reboot your phone and the values will stick.
6 --- GETTING MSL/SPC CODE FOR YOUR PHONE
---Scroll to item ID 00085 with description security code and click it to select it then click read in the bottom right hand side of the NV browser window
---In the input and value fields you will be presented with the MSL/SPC for your phone.
---Use this MSL/SPC code to program/edit the modem nv item values in EPST menus accessed by using ##3282# in the dialer.
---Also type in spc ****** in the text field in the command bar below the view bar in the QXDM window and hit enter, the six stars being the six digits of your MSL/SPC.
---Enter the MSL/SPC in the latter manner before writing new values to the modem for safe measure to ensure they stick.
---Quick note, enter *#*#4636#*#* in the dialer to open the testing menu, and tap phone information then scroll down to set preferred network type, and tap the down arrow to the right then scroll to and tap the network type you would like to use.
7 --- HERE ARE SOME RELEVANT NV ITEMS AND THE VALUES TO WRITE TO THEM....
----------------
Items 6828 and 6829
35184372088830
all lte
----------------
Item 65633
0x00001FFFFFFFFFFE
all LTE Bands
----------------
Item 441
32767
all 3G
----------------
Item 946
65535
all 3G
----------------
Item 1878
32
max HW band
----------------
Item 2954
4294967295
all 3G
----------------
Item 1877
18446744073709551615
all 3G
----------------
Item 4548
18446744073709551615
all 3G
----------------
Item 11
B only
Channel 384 and 777
----------------
Item 12
B only
Channel 384 and 777
----------------
Item 441
0x2
Channel B
----------------
Item 442
0xFFFF
All Roam
----------------
Item 10
LTE Only
Band Pref
----------------
Item 5
0x0
Slot Cycle Index
-------------------
Item 4
0x9A
Station Class Mark
----------------
Item 179
0
Voice Privacy
----------------
What next?
---------- Post added at 11:36 AM ---------- Previous post was at 11:19 AM ----------
I meant how do I use d softwares to edit LTE bands
Thanks a lot man. I've successfully programmed the values and although I have a Sprint version and the LTE bands are different in my country, I was able to get the values from NV calculator on play store. I've not had time to check if they work albeit I programmed 3g bands a while back and band 2100 which works in my country failed to work, I hope the LTE works. Thanks once again
You're Welcome
doyin116 said:
Thanks a lot man. I've successfully programmed the values and although I have a Sprint version and the LTE bands are different in my country, I was able to get the values from NV calculator on play store. I've not had time to check if they work albeit I programmed 3g bands a while back and band 2100 which works in my country failed to work, I hope the LTE works. Thanks once again
Click to expand...
Click to collapse
You're Welcome. Glad it worked for you.
@anthonykb
---With root shell access type this in and hit enter in the command prompt window:
echo 1 > /sys/devices/virtual/android_usb/android0/f_diag/func_en
---You might hear a ding and you have now enabled diag access to use QPST/QXDM in order to program the modem.
Click to expand...
Click to collapse
Great work !!
Do you have any reference to other commands for switching the download / service modes?
To flash boot-loaders and such !!
I have the board support package for the msm8909 chipset and I am working on building the required programmers.
Just need to write my partition.xml ( I have the GPT info. )
My plan is to make a Qfil flashable Service Rom.
Update: Bands were successfully programmed as I stated earlier but sadly, they don't work. I just hope and pray someone somewhere is making a from scratch custom kernel for this device
@doyin116
Did that for Lollipop ( Completed ) For Marshmallow they didn't release the source yet.
I don't think it will be a problem to use the CAF source. ( Will Find out soon. )
Here is my kernel.
http://forum.xda-developers.com/desire-626/development/kernel-wip-port-lollipop-5-1-source-t3470476
Here's my source.
https://github.com/Bigcountry907/kernel_htc_a32eul
I just synced the CAF Android 7.0 source.
It's gonna be a wile cause I been developing this by my self but it is in the works.
I have built the UBERTC cortex a9 toolchains and compiled the kernel inline with the recovery both in omnirom 6.0 and omnirom7.0.
Omnirom 7.0 uses Ninja for building. https://ninja-build.org/
I didn't know if this would cause a problem but it didn't. None I couldn't fix anyway.
So I have used the 5.1 kernel source and built it successfully in newer android versions.
It could be the combination of ninja and the UBERTC toolchain that make it work. IDK.
What do you need in the kernel? I might have it built.
BigCountry907 said:
@doyin116
Did that for Lollipop ( Completed ) For Marshmallow they didn't release the source yet.
I don't think it will be a problem to use the CAF source. ( Will Find out soon. )
Here is my kernel.
http://forum.xda-developers.com/desire-626/development/kernel-wip-port-lollipop-5-1-source-t3470476
Here's my source.
https://github.com/Bigcountry907/kernel_htc_a32eul
I just synced the CAF Android 7.0 source.
It's gonna be a wile cause I been developing this by my self but it is in the works.
I have built the UBERTC cortex a9 toolchains and compiled the kernel inline with the recovery both in omnirom 6.0 and omnirom7.0.
Omnirom 7.0 uses Ninja for building. https://ninja-build.org/
I didn't know if this would cause a problem but it didn't. None I couldn't fix anyway.
So I have used the 5.1 kernel source and built it successfully in newer android versions.
It could be the combination of ninja and the UBERTC toolchain that make it work. IDK.
What do you need in the kernel? I might have it built.[/QUOTE
Came across your kernel but from my understanding, it was meant for the METRO PCs version of 626s while mine is the Sprint version. I also tried to downgrade from marshmallow to lollipop but wasn't successful because it seemed the tutorial again was for METRO PCs. As to what I need in the kernel, I heard Qualcomm has an anti-tamper settings or so that prevents flashed bands from working but can be by passed by a built from scratch kernel.
My questions now are: can I flash your kernel on my 626s albeit the Sprint version and if yes, how do I downgrade to 5.1 on my Sprint version. If no, could you please create a custom kernel for the Sprint version? Thanks
Click to expand...
Click to collapse
Maybe I can get you a ruu of lolipop.
Let me go see.
Most likly I need to build you a kernel.
BigCountry907 said:
@doyin116
Did that for Lollipop ( Completed ) For Marshmallow they didn't release the source yet.
I don't think it will be a problem to use the CAF source. ( Will Find out soon. )
Here is my kernel.
http://forum.xda-developers.com/desire-626/development/kernel-wip-port-lollipop-5-1-source-t3470476
Here's my source.
https://github.com/Bigcountry907/kernel_htc_a32eul
I just synced the CAF Android 7.0 source.
It's gonna be a wile cause I been developing this by my self but it is in the works.
I have built the UBERTC cortex a9 toolchains and compiled the kernel inline with the recovery both in omnirom 6.0 and omnirom7.0.
Omnirom 7.0 uses Ninja for building. https://ninja-build.org/
I didn't know if this would cause a problem but it didn't. None I couldn't fix anyway.
So I have used the 5.1 kernel source and built it successfully in newer android versions.
It could be the combination of ninja and the UBERTC toolchain that make it work. IDK.
What do you need in the kernel? I might have it built.
Click to expand...
Click to collapse
BigCountry907 said:
Maybe I can get you a ruu of lolipop.
Let me go see.
Most likly I need to build you a kernel.
Click to expand...
Click to collapse
Would really appreciate you building me a kernel. Thanks in advance
@doyin116
I got my hands on a RUU for sprint lolipop.
I will upload when I get a chance.
Right now i'm in kernel mode so you might get lucky.
Hopefully I can add the sprint config to my tree and build it.
I'm trying that with the vzw 526. So if all goes well........
After I make recovery for 526 I will compile you a kernel.
BigCountry907 said:
@doyin116
I got my hands on a RUU for sprint lolipop.
I will upload when I get a chance.
Right now i'm in kernel mode so you might get lucky.
Hopefully I can add the sprint config to my tree and build it.
I'm trying that with the vzw 526. So if all goes well........
After I make recovery for 526 I will compile you a kernel.
Click to expand...
Click to collapse
I'm glad. Is there a time frame for all of this to be done?
I will upload this ruu tonight. Over the weekend I will put together the kernel over the weekend.
You will have to test it. I don't think I can flash sprint to my device. It's metro. But I am s-off.
BigCountry907 said:
@doyin116
I got my hands on a RUU for sprint lolipop.
I will upload when I get a chance.
Right now i'm in kernel mode so you might get lucky.
Hopefully I can add the sprint config to my tree and build it.
I'm trying that with the vzw 526. So if all goes well........
After I make recovery for 526 I will compile you a kernel.
Click to expand...
Click to collapse
BigCountry907 said:
I will upload this ruu tonight. Over the weekend I will put together the kernel over the weekend.
You will have to test it. I don't think I can flash sprint to my device. It's metro. But I am s-off.
Click to expand...
Click to collapse
No problem. I'm up for it
@doyin116n116
Here is the 5.1 ruu for sprint.
https://drive.google.com/open?id=0B8jitdIyh2NtUHQ2YWd5T2RCUFk
Download it and rename the file 0PM9IMG.zip.
See the downgrade post for metro pcs and edit the mainver in the misc partition as shown there.
You can just flash the misc.img that is posted on that thread.
Copy the 0PM9IMG.zip to your sdcard.
Boot the phone into download mode.
It will ask you if you want to install the ruu.
Hit the vol up key to install it.
If it reboots the first time back to download mode then hit vol up again.
It will flash for sure.
And don't worry.....it is easier to go back to MM than it is to go to LP.
BigCountry907 said:
@doyin116n116
Here is the 5.1 ruu for sprint.
https://drive.google.com/open?id=0B8jitdIyh2NtUHQ2YWd5T2RCUFk
Download it and rename the file 0PM9IMG.zip.
See the downgrade post for metro pcs and edit the mainver in the misc partition as shown there.
You can just flash the misc.img that is posted on that thread.
Copy the 0PM9IMG.zip to your sdcard.
Boot the phone into download mode.
It will ask you if you want to install the ruu.
Hit the vol up key to install it.
If it reboots the first time back to download mode then hit vol up again.
It will flash for sure.
And don't worry.....it is easier to go back to MM than it is to go to LP.
Click to expand...
Click to collapse
@BigCountry907 I'm having issues flashing the misc.img. I flashed through adb fastboot flash misc.img and it said unknown partition 'misc.img' error: cannot determine image file name for 'misc.img'. I flashed through twrp and it said could not find meta-inf/com/Google/Android/update-binary in the zip file. Through adb I did adb push misc.img /sdcard/".
"adb shell"
"su"
"dd if=/sdcard/misc.img of=/dev/block/bootdevice/by-name/misc" and it succeeded but when I flashed the 5.1 ruu it said ru_zip_error.
Could it be that the downgrading process is for metro PCs/ do I have to be unrooted or can I get detailed process of flashing it if I did it wrong. Alternatively, is there a tool I can use to access the misc.img partition and edit it myself?
@doyin116
I am creating a new how to thread.
We have got this thread way off topic.
The new thread is here.
http://forum.xda-developers.com/desire-626/general/how-to-downgrade-sprint-desire-626s-to-t3498653
Give me a little wile to write it up.
If a Moderator would like to move post #7 through post #17 to there that would be good.
How do we request a moderator to do that?
Old thread on old phone, I realize... but hoping someone might catch this & assist me. Having issues with gather SPC using QXDM 03.14.594 on 626s 0PM92 - Sprint MM ROM running on I-Wireless [T-Mobile].
While attempting READ on 00085, response is: "No DIAG response received".
Concerned about programming NV values in EPST w/o it. Any thoughts?
Update: After upgrading both qxdm/qpst, I'm getting a return on read from phone. Has it possibly been set as: 000000?