Good afternoon,
I was installing a ROM on my girlfriend's cellphone (LG P700), and hit the "format / system" unintentionally and now the phone will not turn on and does not go further in recovery mode.
What can I do? URGENT!! :crying::crying::crying::crying::crying:
I thank you. Excuse my english, I'm Brazilian.
KevinSousa said:
Good afternoon,
I was installing a ROM on my girlfriend's cellphone (LG P700), and hit the "format / system" unintentionally and now the phone will not turn on and does not go further in recovery mode.
What can I do? URGENT!! :crying::crying::crying::crying::crying:
I thank you. Excuse my english, I'm Brazilian.
Click to expand...
Click to collapse
try holding both, vol+ and vol- keys, while presing home, and power button, when the phone vibrates, release power button, but keep holding vol+, vol- and home button for about 2 seconds, then release everything....
phone should boot into recovery now...
http://forum.xda-developers.com/showpost.php?p=31828740&postcount=1191
there you'll find instructions to flash again original rom.
hi !
no worries !
you just have to reflash the same rom you had..... without wipe data/factory ! try ...
Related
Hello guys, first, sorry for my bad english.
I'm having some problems with my defy, I was using the CM7 for months but now it start to stuck on Motorola's logo and when I tried to access the stock recovery, by pressing Power + volume down, anything happened, I only can access the bootloader by pressing Power + volume up.
So I tried to flash a old SBF that I have here, but, when the device will start again, it stuck on Motorola's logo again.
Then I downloaded a SBF that seems to be the "original of my phone version" and flashed it, but the device stills stucking at the Motorola's logo.
I think that I need to wipe data/cache, but how?!?
Any advices??
I need my phoneee!!
again flash with nodric ram
moji7 said:
again flash with nodric ram
Click to expand...
Click to collapse
Sorry, I don`t understand
He is saying you should start over and flash the Nordic SBF again.
But it would be helpful to know which SBF's you've tried which didn't work. What RSD lite version you are using? I'm using RSD Lite 5.3.1 and the 5.1.0 motorola driver and never had issues.
Don't forget to "wipe data/factory reset" and "wipe cache" in Stock Recovery (power + vol down) before flashing.
Also, what did you do before CM7 stopped working. It doesn't break for no reason.
twa_priv said:
He is saying you should start over and flash the Nordic SBF again.
But it would be helpful to know which SBF's you've tried which didn't work. What RSD lite version you are using? I'm using RSD Lite 5.3.1 and the 5.1.0 motorola driver and never had issues.
Don't forget to "wipe data/factory reset" and "wipe cache" in Stock Recovery (power + vol down) before flashing.
Also, what did you do before CM7 stopped working. It doesn't break for no reason.
Click to expand...
Click to collapse
Im using RSD lite 4.9 and I don't know the version of the drivers...
And I could not wipe data/cache because I could not access the stock recovery
when I tried to access the stock recovery, by pressing Power + volume down, anything happened, I only can access the bootloader by pressing Power + volume up.
Click to expand...
Click to collapse
To enter stock recovery: Power up phone and press the vol down button. When you see the android icon push volume up and down at the same time.
twa_priv said:
To enter stock recovery: Power up phone and press the vol down button. When you see the android icon push volume up and down at the same time.
Click to expand...
Click to collapse
I already tried it, but i can't acces the stock recovery!
pituca292 said:
Hello guys, first, sorry for my bad english.
I'm having some problems with my defy, I was using the CM7 for months but now it start to stuck on Motorola's logo and when I tried to access the stock recovery, by pressing Power + volume down, anything happened, I only can access the bootloader by pressing Power + volume up.
So I tried to flash a old SBF that I have here, but, when the device will start again, it stuck on Motorola's logo again.
Then I downloaded a SBF that seems to be the "original of my phone version" and flashed it, but the device stills stucking at the Motorola's logo.
I think that I need to wipe data/cache, but how?!?
Any advices??
I need my phoneee!!
Click to expand...
Click to collapse
Sorry, missed that part.
Well ... I don't recall reading about such behaviour before - unless the battery is dead.
But then you wouldn't be able to get the bootloader either.
I would try again to get into recovery and make sure you press the power + vol up buttons for a few seconds before releasing.
And out of curiosity: what exactly did you do when CM7 stopped working. It doesn't break for no reason.
twa_priv said:
Sorry, missed that part.
Well ... I don't recall reading about such behaviour before - unless the battery is dead.
But then you wouldn't be able to get the bootloader either.
I would try again to get into recovery and make sure you press the power + vol up buttons for a few seconds before releasing.
And out of curiosity: what exactly did you do when CM7 stopped working. It doesn't break for no reason.
Click to expand...
Click to collapse
I tried to enter in the recovery mode a lot of times and nothing!
I didn't done anything diferent that could make CM7 stop, it stopped by itself!
Guys, I'm thinking in send it to a techinical support, of Motorola.
What do you think?
twa_priv said:
To enter stock recovery: Power up phone and press the vol down button. When you see the android icon push volume up and down at the same time.
Click to expand...
Click to collapse
You are a life saver!
-----------
I got a similar situation as our friend here. Today I had shutdown my Defy (rooted + stock 2.2.1) when i tried to turn It on again It got stuck at the operator logo forever!
I did the clear data from recovery and I got my cellphone back to live. Thanks!
Im Stuck too...
I have a problem with my Defy MB525, This morning I woke up and found the cell with the Android Logo with Exclamation, it was really hot so I turn off pulling the battery.
Then I tried to power ON but still stuck on Motorola's logo, in trying to enter the recovery (Pressing vol+ and Power but nothing, same pressing vol-).
the strangest of all is that my Defy don't display the white led, so it's not charging?
As far as I was to the symbol of android with red exclamation, I tried pressing the volume buttons but none served.
I was looking in other threads but nothing helps me, can you help me please? thanks.
Hey guyz,
Could you help me please? I have ZTE Blade TFT phone with 2 gen ROM.
Unfortunatly hardware buttons are not working and can't be repaired. After flashing new ROM my phone is stuck on Android logo.
I have CWM installed, but unfortunatly I can't perform hard reset due the broken buttons.
I can't reflash it via other method as well, cause factory recovery is replaced by CWM.
I can't use a TPT method as menu button is not working as well.
Could you please recommend me any method to recover my phone?
Any feedback is welcome!
Kostiantyn
Lightingrain said:
Hey guyz,
Could you help me please? I have ZTE Blade TFT phone with 2 gen ROM.
Unfortunatly hardware buttons are not working and can't be repaired. After flashing new ROM my phone is stuck on Android logo.
I have CWM installed, but unfortunatly I can't perform hard reset due the broken buttons.
I can't reflash it via other method as well, cause factory recovery is replaced by CWM.
I can't use a TPT method as menu button is not working as well.
Could you please recommend me any method to recover my phone?
Any feedback is welcome!
Kostiantyn
Click to expand...
Click to collapse
Okay dude keep calm maybe your phone is still alive.
Check:
-Do you can enter FTM Mode?
-When you put the device @ charging , does it show a charging animation?
If so or not , pull out battery out of device for 4-5 hours (!) , then put battery back in and try to go in recovery! Maybe then it will go ... If you need to put another ROM to device , just 'Mount and Storage" -> "Mount USB Storage" -> connect phone via USB to Computer and you are able to put another ROM to sdcard.
When you install new ROM
-2x Wipe Data&Factory Reset
-2x Wipe Cache
-2x Wipe Dalvik (under 'Advanced')
-Not needed but you can Wipe Battery Stats
-Install .zip from sdcard
-choose .zip from sdcard
-choose ROM , install and reboot.
I hope it helped!
UnlimitedRom said:
Okay dude keep calm maybe your phone is still alive.
Check:
-Do you can enter FTM Mode?
-When you put the device @ charging , does it show a charging animation?
If so or not , pull out battery out of device for 4-5 hours (!) , then put battery back in and try to go in recovery! Maybe then it will go ... If you need to put another ROM to device , just 'Mount and Storage" -> "Mount USB Storage" -> connect phone via USB to Computer and you are able to put another ROM to sdcard.
When you install new ROM
-2x Wipe Data&Factory Reset
-2x Wipe Cache
-2x Wipe Dalvik (under 'Advanced')
-Not needed but you can Wipe Battery Stats
-Install .zip from sdcard
-choose .zip from sdcard
-choose ROM , install and reboot.
I hope it helped!
Click to expand...
Click to collapse
Hi,
Thanks for assistance! Recovery is already installed. I'm not able to wipe data and cache due broken hardware buttons. Still don't have solution.
Flash this via Fastboot
This recovery is CWM touch recovery for Zte Blade. Name it 'recovery.img' and fastboot it.
UnlimitedRom said:
Flash this via Fastboot[/URL]
This recovery is CWM touch recovery for Zte Blade. Name it 'recovery.img' and fastboot it.
Click to expand...
Click to collapse
Thanks for advice.
This methods doesn't work for me as well. It progresses beyond the green android and load ROM logo.
Turn on your phone with volume up held and connect it to your computer. It should not progress beyond the green android. Sometimes you have to wait a few minutes for
Click to expand...
Click to collapse
Lightingrain said:
Thanks for advice.
This methods doesn't work for me as well. It progresses beyond the green android and load ROM logo.
Click to expand...
Click to collapse
To get in fastboot you have to hold the vol up key for around second and then press power on while holding vol up. I mean you shouldn't hold the two buttons at same time to power up.
1. Hold Vol Up key
2.While holding vol up , wait 3 seconds
3 While holding vol up , press power on now. At least you hold two buttons.
4.You should now be in fastboot mode.
.
UnlimitedRom said:
To get in fastboot you have to hold the vol up key for around second and then press power on while holding vol up. I mean you shouldn't hold the two buttons at same time to power up.
1. Hold Vol Up key
2.While holding vol up , wait 3 seconds
3 While holding vol up , press power on now. At least you hold two buttons.
4.You should now be in fastboot mode.
Click to expand...
Click to collapse
It doesn't work for me. I tried several times. ROM logo appeared after android one
Lightingrain said:
It doesn't work for me. I tried several times. ROM logo appeared after android one
Click to expand...
Click to collapse
Do you can enter bootloader mode?
kevinrus123 said:
Do you can enter bootloader mode?
Click to expand...
Click to collapse
Unfortunately, I can't.
I can access only CWM mode
Hi guys, i'm from brazil, and i'm having a problem.
I don't what happened, but I took my SIM to test in another galaxy and worked. I was showing that the advice was working. Than i put the SIM back in the S4 GT 9505, and my phone didn't call anymore. My internet is working. When i try call to anyone, the phone just make the end call. Someone could help me? Sorry for my bad english.
Thanks
Try clearing cache.
-Power off your phone
-Enter recovery (volume up+home button+powerbutton)
-As soon as you see the S4 screen release all the buttons and in a jiffy press volume up+home button
-Youre in recovery mode now.
-See for the option wipe cache
-Scroll down using the volume buttons
-press yes with the power button
-Cache is wiped
Now test.
"If someone helps, never forget to hit thanks ? "
DeepankarS said:
Try clearing cache.
-Power off your phone
-Enter recovery (volume up+home button+powerbutton)
-As soon as you see the S4 screen release all the buttons and in a jiffy press volume up+home button
-Youre in recovery mode now.
-See for the option wipe cache
-Scroll down using the volume buttons
-press yes with the power button
-Cache is wiped
Now test.
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
I made this before but didn't work.
What I saw, is that is working only one carrier. Now i'm thinking that my phone blocked. I don't know what happened.
But thanks to try to help me.
Hey guys.. Yesterday i downloaded autorec and installed TWRP.. Today i wanted to install a custom rom.. so i read some posts and i thought that i should wipe Everything.. So i wiped even my internal storage where i had my rom .img.. then i searched on the internet and i read to shut down my phone and reboot to recovery mode.. When i did that my phone stuck in bootloop and when i try to power it down it turns itself back on.. I cant enter recovery and download mode.. PLEASE HELP FAST.. my phone is LG G2 D802
Past98 said:
Hey guys.. Yesterday i downloaded autorec and installed TWRP.. Today i wanted to install a custom rom.. so i read some posts and i thought that i should wipe Everything.. So i wiped even my internal storage where i had my rom .img.. then i searched on the internet and i read to shut down my phone and reboot to recovery mode.. When i did that my phone stuck in bootloop and when i try to power it down it turns itself back on.. I cant enter recovery and download mode.. PLEASE HELP FAST.. my phone is LG G2 D802
Click to expand...
Click to collapse
first of all - never, but never delete/wipe your internal storage...
second - and i've wrote this many times already:
to turn the device completely off
- your usb cable must be disconnected
- have the device charged for more than 50%
- press pwr button for more than 10 seconds
- at some point, LG logo will show - DO NOT LET THE PWR BUTTON OFF - KEEP IT PRESSED
- only then the device will be powered off completely with the black screen
THANK YOU!! you are awesome.. I misunderstood and i thought that i should wipe everything.. What do it do now?
Past98 said:
THANK YOU!! you are awesome.. I misunderstood and i thought that i should wipe everything.. What do it do now?
Click to expand...
Click to collapse
now you find the thread on how to transfer a rom to a device directly from twrp or adb... or how to flash KDZ stock (then reroot and go from scratch)
i've never done it because i've never messed up anything on my device (my luck) - so i don't know in details - but there are threads on this subjects...
btw one more thing i've noticed in your 1st post - you had an .img rom file
you can't flash .img in twrp - you'll need the rom .zip file...
how do i access TWRP?
search on which button combination to press to enter twrp... (but before you try the key combinations - have the device powered off completely as described above)
on my device and 20h bootloader its
- press and hold pwr button + volume down
- lg logo shows (let the buttons go for a second or less)
- quickly press and hold pwr button + volume up
that works on my device...
you probably have older bootloader (20a) so you can try
- press and hold pwr button + volume down
- lg logo shows (let the buttons go for a second or less)
- quickly press and hold pwr button + volume down again
now - if you have TWRP installed - it will show you a white screen (factory reset) with yes/or no buttons - just answer YES to all and it will boot to TWRP (you answer with volume up/down keys for selection and pwr button to confirm)
if nothing of that works - try searching for other key combos... but afaik those are the only two that exist - depending on bootloader...
I was using CM 13, and flashed "twrp-0.8.9.5-d802-bump-blastagator-signed.zip" over 2.8.7.3 for my LG G2 D802, then I rebooted into recovery, got new theme and all those stuff as 0.8.9.5 should have. Everything was OK, but right after flashed "bootstack-d802-LP_30d-Bump-signed" for install Cloudy G3 3.3, my phone turns off, so i decided to enter in recovery mode again. Got this: "Permanently Erase User Data & Reset Settings? Press Power key to confirm, and any other key to cancel". So I pressed power button and this message came "Are you sure you want to continue with erase? Press Power key to confirm, and any other key to cancel". Pressed power again and "Facory reset processing..." message appears for a second, then my screen turned black (not off, just black). Now i can't boot into recovery, just download mode, but can't install firmware via kdz because flash tool stuck at 2%. What should I do to fix this? Please help!
PS: Sorry for my bad english.
Edit: When I try to enter in recovery mode (failing into that black screen) and connects phone to my pc through usb, pops up multiple windows asking to format all my "corrupted mobile partitions" (screenshot: i.imgur.com/gMX2f7u.png).
7Potters said:
I was using CM 13, and flashed "twrp-0.8.9.5-d802-bump-blastagator-signed.zip" over 2.8.7.3 for my LG G2 D802, then I rebooted into recovery, got new theme and all those stuff as 0.8.9.5 should have. Everything was OK, but right after flashed "bootstack-d802-LP_30d-Bump-signed" for install Cloudy G3 3.3, my phone turns off, so i decided to enter in recovery mode again. Got this: "Permanently Erase User Data & Reset Settings? Press Power key to confirm, and any other key to cancel". So I pressed power button and this message came "Are you sure you want to continue with erase? Press Power key to confirm, and any other key to cancel". Pressed power again and "Facory reset processing..." message appears for a second, then my screen turned black (not off, just black). Now i can't boot into recovery, just download mode, but can't install firmware via kdz because flash tool stuck at 2%. What should I do to fix this? Please help!
PS: Sorry for my bad english.
Edit: When I try to enter in recovery mode (failing into that black screen) and connects phone to my pc through usb, pops up multiple windows asking to format all my "corrupted mobile partitions" (screenshot: i.imgur.com/gMX2f7u.png).
Click to expand...
Click to collapse
try SKRTOOLS click on my signature and go into tools sections .