{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PACman FAQ
PIE FAQ
Q. What is PIE?
A.. PIE is a new way to interact with your notifications. It provides easy gesture based interaction with all your system information without taking up valuable screen space. Click here for more info.
Q. How do I access Pie?
A. Swipe your finger from the pie gravity edge (default is the bottom) toward the center of your screen. While keeping your finger on the screen, drag your finger to the desired button and release to click.
Q. My PIE doesn't look like the ones in the screenshots. I don't see the Clock or notifications.
A. Notifications work either through the status bar or PIE. If the status bar is enabled, PIE reverts to just the softkeys. To enable the full PIE experience, enable Expanded Desktop by going to Settings -> System -> Power Menu -> Expanded Desktop (Status bar hidden). Access the power menu and turn Expanded Desktop on.
Q. How do I change PIE colors?
A. Go to Settings -> Hybrid Properties -> Interface and change the Navigation bar color.
Q. Buttons or keyboard rows near the edge of my screen are nonresponsive.
A. PIE's trigger area overlay is covering the edge of your screen. Change either the Trigger Area or Pie Gravity in Settings -> System -> PIE Settings.
Q. I don't like PIE, how do I turn it off?
A. To disable PIE set Trigger Area to None in Settings -> System -> Pie Settings. Remember to disable Expanded Desktop to turn status bar on again.
ROM FAQ
Q. Do I need to do a full wipe before installing this ROM?
A. Unless coming from a previous version of PACman it is highly recommended to do a full wipe before installing. This includes coming from ParanoidAndroid ROMs.
Q. What do the settings in Hybrid Properties do?
A. ParanoidAndroid has an extensive guide to the settings at this thread: [GUIDE][PARANOIDANDROID] A Complete Compendium on ParanoidPreferences [PA-Settings] Please do not post questions related to PA Settings in this thread, they are not ROM specific and all we'll do is point you to that thread.
Q. How do I turn on the Navigation Bar?
A. To enable the NavBar open Hybrid Properties, swipe the screen to the right to peek through to the menu.
Select Interface, now set your desired NavBar size with the slider.
Q. Something isn't working. What do I do?
A. First, make sure you are running the latest stable version. Try a backup data using Titanium and do a full wipe reinstall. If the problem persists, report what it is and what triggers it so the dev can duplicate it.
Q. Can we flash this on Locked Bootloader?
A. No, This requires custom kernel and can never be flashed on locked bootloaders.
Feature FAQ
Q. How do I use the other features that are included with PAC?
A. Click on each features to get more info.
Active Display.
Wakelock Blocker.
Ribbons.
Signal.
Weather.
Suspend Actions.
Gesture Anywhere.
Hardware Acceleration.
Gesture Navigation.
Init.d
Buttons
L.E.D
Sound
Vibrations
Notification Drawer.
Toggles.
Battery.
Clock.
Miscellaneous.
do you maybe know of something like PIE also as an App to be installed to a different rom? thanks!!
22anl said:
do you maybe know of something like PIE also as an App to be installed to a different rom? thanks!!
Click to expand...
Click to collapse
It is part of the ROM at this stage, no seperate apk. This is the case for all ROMs that have PIE
Thanks
Nick, I'm glad I found you, been lookin all over for you..
I HAVE SOME VERY STRANGE ISSUES..
The nav bar at the bottom overlaps about halfway above of the dock of next launcher which makes the dock unusable and ugly.. the same problem persist in 50% of the other apps notably go sms, quick pic, go launchers and many others.. I mean the nav bar is somehow conflicting/interfering with certain UI parts of some apps.. I have tried the milestone releases and a few latest nightlies but its still not fixed..
Its hard to believe there are many discussions of issues about pac rom going on but I didn't find this preety obvious and significant one anywhere..
I have waited like 3 months since I started with pac, updated about 5 nightlies hoping it will be fixed but no luck everytime..
This one is a serious one.. It has forced me not to use some of my fav apps and use pie navigation at times..
No problem with all the minor bugs but this one is frustrating..
ANY IDEA??
PS. pac ver 4.3.1 on sg tab p3100 and sgs3
Sent from my GT-P3100 using XDA Premium 4 mobile app
Galaxy S4
I'll be running the Milestone 1 on my SG4 tonight. Is anyone having any significant issues with the newest nightly?
Upon further inspection is the Milestone not on 4.3? I suppose I'll flash the most current nightly. Any help would be appreciated.
Prodiggy said:
Nick, I'm glad I found you, been lookin all over for you..
I HAVE SOME VERY STRANGE ISSUES..
The nav bar at the bottom overlaps about halfway above of the dock of next launcher which makes the dock unusable and ugly.. the same problem persist in 50% of the other apps notably go sms, quick pic, go launchers and many others.. I mean the nav bar is somehow conflicting/interfering with certain UI parts of some apps.. I have tried the milestone releases and a few latest nightlies but its still not fixed..
Its hard to believe there are many discussions of issues about pac rom going on but I didn't find this preety obvious and significant one anywhere..
I have waited like 3 months since I started with pac, updated about 5 nightlies hoping it will be fixed but no luck everytime..
This one is a serious one.. It has forced me not to use some of my fav apps and use pie navigation at times..
No problem with all the minor bugs but this one is frustrating..
ANY IDEA??
PS. pac ver 4.3.1 on sg tab p3100 and sgs3
Sent from my GT-P3100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Did you try using another UI layout? Some users on the p31xx thread switched to a different UI and that kinda fixed the problem for them.
Dalisword said:
I'll be running the Milestone 1 on my SG4 tonight. Is anyone having any significant issues with the newest nightly?
Upon further inspection is the Milestone not on 4.3? I suppose I'll flash the most current nightly. Any help would be appreciated.
Click to expand...
Click to collapse
I'm running the latest nightlies on my S4 and I'm not getting any problems yet. *knock on wood*.
And also we'll release the Milestone for 4.3 soon.
Sent from my SGH-I337M using Tapatalk
Nick0703 said:
I'm running the latest nightlies on my S4 and I'm not getting any problems yet. *knock on wood*.
And also we'll release the Milestone for 4.3 soon.
Sent from my SGH-I337M using Tapatalk
Click to expand...
Click to collapse
I flashed the newest nightly. I'm impressed, battery life is impressive and the settings are outstanding. I've had a few bugs, somebody really doesn't like this Tyler guy.
Yeah.. I hav tried the diff PA UI, its still the same when I switch to phone/phablet UI which I like.. dont prefer the tablet UI at all so havnt tried that..
Sent from my GT-P3100 using XDA Premium 4 mobile app
Swype
so i accidentally delete swype while troubleshooting bcuz it kept crashing. How do i restore it?
---------- Post added at 04:40 PM ---------- Previous post was at 03:56 PM ----------
Tank87 said:
so i accidentally delete swype while troubleshooting bcuz it kept crashing. How do i restore it?
Click to expand...
Click to collapse
nevermind. i figured it out. i used es file explorer to search for the original file and re-installed.
How do I take a screenshot with the new Rom?
[ROM][OFFICIAL][KitKat 4.4.2][Hercules] PAC-man Alpha 1 [AOSP]
slippy3002 said:
How do I take a screenshot with the new Rom?
[ROM][OFFICIAL][KitKat 4.4.2][Hercules] PAC-man Alpha 1 [AOSP]
Click to expand...
Click to collapse
Usually power+vol up
Not sure for your device though
Langes said:
Usually power+vol up
Not sure for your device though
Click to expand...
Click to collapse
I tried that. T-Mobile Samsung galaxy s2
Sent from ®[email protected]!
slippy3002 said:
I tried that. T-Mobile Samsung galaxy s2
Sent from ®[email protected]!
Click to expand...
Click to collapse
Home-power
أرسلت من softwin بإستخدام تاباتلك
Any update to alpha 2 ?? My mobile Samsung galaxy s plus
Sent from my GT-I9001 using Tapatalk
Hey Nick,
Can you tell me what version of Pac rom you used on your s4 i337m? I would like to give it a try.
Thanks in advance.
/
Never mind, I tried jlte version and its working just fine.
Sent from my SGH-I337M using XDA Free mobile app
compatibility
i have a doubt...
how many devices are compatible with this?
i wanted to know whether it would work on my karbonn titanium s5 plus... ( coolpad 7295mi01 or 7295c )....
if it is compatible then i will flash it onto my phone...
i dont want to have any issues while flashing, that's why...
rjt.rockx said:
i have a doubt...
how many devices are compatible with this?
i wanted to know whether it would work on my karbonn titanium s5 plus... ( coolpad 7295mi01 or 7295c )....
if it is compatible then i will flash it onto my phone...
i dont want to have any issues while flashing, that's why...
Click to expand...
Click to collapse
Here is the list of officially supported devices
Can I get the rom for Samsung galaxy grand quattro i8552
Sent from my GT-I8552 using XDA Free mobile app
can I set chrome in full screen?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do not report ANYTHING or as moles and D4rkn3sSyS says, I will hunt you
JellyBean Beta
CWM: Wipe Cache / Factory Reset IF you're on any ROM other than AOSP JB (May work without fullwipe from older PA versions if your /data folder is not full of things)
CWM: Install Zip: Rom: Download
CWM: Install Zip: Gapps: Download
CWM: Wipe Cache Partition
CWM: Advanced/Wipe Dalvik Cache
Reboot
Click to expand...
Click to collapse
ICS Stable
Install Rom: http://d-h.st/upW (md5: 57ff719ed60ffb8cb1262966b0f6ed35)
Install HYBRID Gapps: http://4ndr01d.com/drcmda/common/ (mirror: click here if needed)
Wipe caches, factory reset is a must if you're coming from another rom than CM9
Click to expand...
Click to collapse
Our webpage: http://betadan.com/paranoid/
You want to port PA? Take a look here: http://forum.xda-developers.com/showthread.php?p=27558806
Themes and other goodies you can find here: http://forum.xda-developers.com/showthread.php?t=1646034
Go to Settings, System, Font size, set it to NORMAL
Check "Auto Hide" in Settings, System, Statusbar, to finally get Fullscreen
Trebuchet Settings: margins:SMALL, show permanent searchbar:YES, Grid: 4x4, resize all widgets:YES, Wallpaper scrolling: OFF
Click to expand...
Click to collapse
If you have an issue and you want to call our attention, here's what you do:
1. Try everything you can, find solutions for yourself. Wipe caches, revert all your settings you have made, go back to your stock Kernel, factory reset if you have to or reflash the rom. Assume that the issue is on your side and try your best to isolate it.
2. Search this thread and Cyanogenmods aswell (its our base) for possible reoccurences of your issue and hopefully solutions that may have come up.
3. If you think the issue is important enough that we should cease our work and look into it, post your issue, BUT ...
... stay friendly, do not demand anything, do not threaten
... explain your issue as precise as you can, name the exact apps and conditions that cause trouble, help us to replicate the issue right away. If we can't there's no way we can fix it and your post will simply clutter the thread
... collect evidence, keep in mind this is a developer thread so even if you are not one, do us the favor and research how to record logcat. logcat is the single most important help you can give us to resolve your issue.
Click to expand...
Click to collapse
Tina: http://krebsmilk.de/
Cyanogenmod Team
Pawitp
TeamHackSung
ParanoidAndroid Team
DaXmax
Click to expand...
Click to collapse
ParanoidAndroid JellyBean - v1.9.2
v1.9.2
Softkeys toggle
Merged CM's theme engine
Fixed a few unclean sources
HDPI adjustments
Fixed Wifi Supplicant
v1.9.1
Hybrid bugfix, finally keyboard/facebook scaling works on JB again without sideeffects
Layout fix for notificationcenter gap in tabUI
Layout fix for recents in phabUI
Speed prefs ask for reboot
New bootani thx to nasaorc
CM10 patches
Code:
[B]20120719v1.8alpha[/B]
Bluetooth was not working in 1.6, now it does
Selection in landscape was botched, now it isn't
Hide statusbar/navbar is back
A whole bunch of CM features and powermenu options
Corrected the way JB displays sw720 TabUI apps (it wasted almost 40% of the screen with margins)
Dreadful CM-default ringtones are out
Some other stuff i cant remember right now
[B]20120717v1.7alpha[/B]
SysUI bugfixes, all three modes work by simply dropping it into a mode, no more navbar height issues
Recents/menu merge
ParanoidPreferences panel, barebones stripped down version, no bug reports please, we know its not stable yet
new bootanimation, thx nasaorc
[B]v1.6[/B]
Built from source - 10/7/2012 - 00:27:58
OTA app changed (This trashes OTA update, please download manually this version). More responsive methods
Merged latest CM changes, including a lot of fixes and improvements for device tree
Improvements on frameworks, fixed for once and finally all DPI related crashes
SystemUI mode can be configured now
Cleanup and speedup of hybrid code via native libs (I'd say 25%)
A [B]lot[/B] more of changes, you can check them here: [url]https://github.com/ParanoidAndroid[/url]
[B]v1.5[/B]
Built from source - 25/6/2012 - 11:3:12
Updated CM9 Kernel to 3.0.36
Improvements on OTA app, scheduled checkups
Improvements on Backup app, now it automatically launches on startup after you install a newer (or older) version
Hybrid speedup, less lag, considerably faster list scrolling when pad/pal is in action
Keyboard scaling, an androids first
PAD/PAL bugfixes for apps that still crop images in lower dpis
Settings revamp, speed preferences to switch between modes without having to set up anything, less clutter
Trebuchet extras: 3x4 widgets, speed dial menu button, ... and some weird rocket button which im sure will be very useful to most of you
Pad.prop revamp, new preferences that should pretty much nail it. Im sorry but this trashes your old settings again, do not attempt to restore them unless you do it in a text editor
v1.4
Built from source, 3:03pm COT. Synced with latest Paranoid sources
Fixed most of the issues with pad & pal, now facebook, whatsapp, keyboards, etc will be shown just fine
PAD/PAL work in phonemode 100%, no weird toggles and stuff like that. you get full tablet apps without caveats
Settings cleanup, most of the garbage dpi options are gone, should be more intuitive - i ask you to not bring your old pad.props though some things changed. if you know what you do take a look and edit by hand
Trashed our LatinIME repo - not needed anymore
Fixed OTA 100%, now it should never hang on 99%
Navbar editor is now hidden on tablet mode ... ups missed that one.
ParanoidAndroid Alpha Livewallpaper
Issue
-Wifi Tethering doesnt works, but USB/Bluetooth works fine
[B]v1.2[/B]
Built from source, 04:27 CEST.
Updated kernel to latest CM Kernel
Patched linaro spare parts
Fixed Tethering
First unified release, compiled from our git
New panel (You already know it if you used betas)
Added ParanoidBackup app
Fixed bugs on beta releases (Battery swapping, overlaps, ui bugs etc)
Recent apps improvement on tab mode (bigger preview)
Error where app shows up in the wrong UI will be fixed
Scaling lockscreen dialogs and so on
Removed hardcoded framework values (yay! )
Removed "Global density", if you STILL want to mess with this one with v1.2, you've not even tested a 50% of what this ROM can do.
Fixed a lot of other things on pad & pal, cleaned up sources
Fixed themes crash on tab mode, still crashes sometimes on phone mode. [Seems this one is totally fixed now. Need to test a bit more]
A HUGE amount of fixes, improvements and so, this version should be rockstable.
[B]v1.1[/B]
Kanged from source, 9:26am COT. All features included (even the ones that are on CM9 changelog but not on latest nightly)
Updated kernel to latest Pete's kernel
Fixed Bigmemory problems
Fixed Bluetooth?
Fixed navbar on phone mode, and now doesn't removes statusbar transparency
Fixed Utils.isScreenLarge() method, now it checks for LCD Density, wich reduces % of error to 0
Improved panel a LOT, including a cool action bar for saving or discarding changes
.force pad feature implemented, now you can resize widgets
Added more descriptive strings to panel
Added customizable toggles for tablet mode. You can choose now between 9 toggles, and a max of 6 of them. You can also reorganize or remove all the toggles.
Removed some battery styles, and HC lockscreen, searching for a common base
Translated a lot of things in spanish XML's :p ([url]http://review.cyanogenmod.com/#/c/16596/[/url])
[B]v1.0[/B]
Kanged from source, 1:04pm COT. All features included (even the ones that are on CM9 changelog but not on latest nightly)
Improvements on OTA app
First time in Android history that Per-App-Layout has been realized
Comes with a better panel
Fixed pin screen hot reboot
[B]v0.6[/B]
Kanged from source, 2:52pm COT.
Updated kernel to latest siyahKernel
Fixed tablet mode swapping not overriding sense recent apps option
Automatically disable all the DPI options if PAD is not enabled
General fixes. We're now stable. This version is not a beta but a RC
Fixed reset button on PAD panel
Fixed tablet mode keyboard popup (Is little but there it is, not cutted anymore)
Force to hide statusbar (Global menu option)... finally fullscreen gaming!
New PAD code. No lags at all, rotation is smoooth.
[B]v0.5[/B]
Kanged from source, 11:10am COT. All features included
Updated kernel to latest siyahKernel
CherryPicked a few CM things that I'm sure they will merge soon (and what if they dont :p)
Home button long press on tablet mode now handles recent apps (just like on phone mode)
New PAD panel. Moles didn't sleep today
Fixed most of the crashes (99%, maybe I missed something)
Fixed lockscreen music transport overlay
Fixed Can't install apps to external sd, installing them causes acore fc
Tablet mode onScreen buttons toggle
Instant changes, SoftKeys (Not even on AOKP :p)
First
Sent from my SGH-I897 using xda premium
Downloading Now .. report in 24 hours unless otherwise needed....
Nice work!
Good im gonna try right now!
installed & running smoothly. no hiccups yet.
some features missing but i guess u still working on those. good work tho
:good:
So trying it now Thanks loved the last ROM bet I do on this one 2
Decraptivated Samsung
forcex10 said:
installed & running smoothly. no hiccups yet.
some features missing but i guess u still working on those. good work tho
:good:
Click to expand...
Click to collapse
The devs are working hard and have pumped out the last updates quickly, and its still in alpha so more is still to come
What kernel does this include?
Maybe I am missing something but where are the soft keys
Sent from my SGH-I897 using Tapatalk 2
shaker2k said:
Maybe I am missing something but where are the soft keys
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
Under paranoid settings
nygfan760 said:
Under paranoid settings
Click to expand...
Click to collapse
I'm not seeing it
Found it
Sent from my SGH-I897 using Tapatalk 2
shaker2k said:
I'm not seeing it
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
Go through the settings, I had them enabled when I tested this earlier, make sure you enable tablet mode and click navbar controls or w/e
btw this is running extremely smooth, like smoother than any other JB build I have flashed.
Keeping an eye on this one, just got stable with v9 but I will weaken eventually. Great job devs!
Sent from my SGH-I897 using xda app-developers app
Great port Supr. Working fantastically
Sent from my SGH-I897 using xda premium
I'm liking the couple of new interface modes. So far, haven't really had any problems. Previous jellybean ports have had notification issues, sound bugs, music not playing, etc.. but this is working fine aside from a little bit of lag once in a while.
Nice work!
nygfan760 said:
What kernel does this include?
Click to expand...
Click to collapse
Devil 1.0.4
will Glitch v14 B6 work with this?
redkenji said:
will Glitch v14 B6 work with this?
Click to expand...
Click to collapse
??
Sent from my SGH-I897 using xda app-developers app
redkenji said:
will Glitch v14 B6 work with this?
Click to expand...
Click to collapse
That's an ICS kernel, so no.
Sent from my I897 using Tapatalk 2
[MODS][CM9]Optimus 4X LockScreen, Recent Apps, Softkeys & Battery on Status Bar, etc.
Ok, so here is the deal, I have been looking for stuff to mod the last Hehappy ROM (Lastkiss) and found all of these things working for our phone (They SHOULD work on Neko's IcySnap ROM as well), everyone of them has been tested by me on the LG Optimus One P500:
NOTE ABOUT THIS ONE (LG Optimus 4x Lock Screen) :
It does unlock the screen but you have to tap in the center of the screen and SLOWLY (as in very careful and slowly) drag your finger all the way to your upper right corner. (not really worth it)
[MOD] [CM9] LG Optimus 4x Lock Screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Working on CM9 only!
Without transparent!
Installation:
Flash *.zip from recovery
Wipe dalvik
Reboot
Tested and working on:
Quote:
Sony Xperia P
Sony Xperia U
Sony Xperia Go (Need testing)
Sony Xperia Sola (Need testing)
__________________________________________________________________________________________________________
[MOD][CM9] Soft Keys and Battery Line
there is no option to enable / disable buttons or the battery line, they are on by default and can not be configured
make sure you back up your SystemUI so you can go back to the original if you don't like this one
Click to expand...
Click to collapse
Soft Keys ONLY
__________________________________________________________________________________________________________
[mod][cm9 ivendor rc5][update] jelly bean status bar
because I have problems with the Jelly Bean status bars, I've created my own.
this only works with CM9 Ivendor rc 5 other roms have not been tested.
this is my first mod and not stone me if something does not work
Installation:
- Make a Backup of your rom
- Flash this zip with cwm
- go to advanced/ fix permisions
- Reboot and have fun
Click to expand...
Click to collapse
__________________________________________________________________________________________________________
Note about this one:
It also changes the DPI of the NAVIGATION BAR, you can see it on the screenshoot I took on my phone.
WINDOWS TASK SWITCHER MOD FOR CM-9 ICS
Hey guys..
As the name of the thread reads, I have modded the recent's task switcher in ICS/CM9 to be a look-alike of Windows UI
FEATURES
1. Swipe to kill by flinging your finger up
2. Swipe to kill by flinging you finger down
3. Horizontal task switching
4. And of-course a cool new interface
CREDITS
EvilSto
Jellaxy Team
Yackovsy
XDA
Samsung
Google
and ME
Click to expand...
Click to collapse
__________________________________________________________________________________________________________
[MODS][CM9 RC2] Windows style task switcher+Center Lockscreen clock+smoothscroll mod
Thanks to wayland for his CM9 RC2.
Thanks to evilisto for his guide of windows style task switcher
Thanks to AndroidON for his guide of smoothscroll mod
Thanks to King ACE,Ace king 34,and -RDR- for testing.
Feel free to notify in case I forgot to add your name here
users please report bugs if any
If you like my work then take a potato and worship it
Click to expand...
Click to collapse
__________________________________________________________________________________________________________
[MOD] CM9 Increased System Volumes
I just flashed CM9 Alpha 11 by dhiru1602 and noticed that the Touch Sound, Lock Sound and Unlock Sound was too quiet and not noticeable. So I have increased their volume and is available for anyone to try!
Downloads :
Effect_Tick.ogg
Lock.ogg
Unlock.ogg
If you want to flash this MOD from CWM, download this zip file:
Increase Volume (Credits: frapeti)
NOTE:
Take a backup of the files you are going to replace before continuing. If you don't like the new modded audio files, you can always revert back to the original one's!
Instructions
Manually Replacing:
1. Using Root Explorer, go into System/Media/Audio/UI and take a backup of the original audio files you want to replace.
2. Replace the original file with the downloaded one.
3. Change the permission to "RW-R--R--".
Flashing Through CWM:
1. Go into recovery mode.
2. Select "Install zip from sdcard"
3. Navigate to the folder where you saved the flashable .zip file and select it.
4. Flash it!
Reboot your phone and the volume will be increased!
Click to expand...
Click to collapse
__________________________________________________________________________________________________________
Default [MOD][CM9]Multitasking mod / app switcher for cm9 Pico mdpi
Thanks to evilisto, I was able to mod and compile a multitasking/app switcher mod for cm9 HTC Explorer/pico (mdpi) that looks a lot more pretty. (see attachment)
v1 Features:
Dark grey backgroud.
Horizontal navigation between apps.
Swipe up or down to kill app.
Large, beautiful looking thumbnail.
v1a Features:
Same as v1 but changed background to give windows mobile look (looks much prettier).
v2 Features (Sense 4 Multitasking - what's different):
Added code to generate gradient in background.
Added title Recent Apps.
Added thumbnail Reflection.
Added display of icons above the app title.
Added tilt/rotate to thumbnail.
Note: Some people have asked me how to enable landscape view. Landscape view will work only if you are already in an app which is in landscape mode when launching app switcher or if in landscape mode in your launcher (if enabled). This will work for v1, v1a and v2 and all future versions as well.
Click to expand...
Click to collapse
__________________________________________________________________________________________________________
I also uploaded TWO uninstallers, one for hehappy's ROM and one for neko95 ROM, the uninstallers include the original "systemui.apk", "framework-res.apk", "framework.jar", "services.jar", "lock.ogg", "unlock.ogg" and "Effect_Tick.ogg" from each ROM and it will revert every mod you have flashed involving the above files. (Use in case of bootloop or in case you want to use a different mod)
How to install the mods? Download file, boot into recovery, flash the file, wipe dalvik-cache and reboot.
How can I find time to search, test and make dumb threads like this one? I'm unemployed! ._. !!
Have fun.
Click to expand...
Click to collapse
Goodies! Too bad I am on AOKP so the lockscreen I have been waiting for is not supported on this ROM.
--
P>
Sent from my LG-P500 using xda app-developers app
don´t work on oxygen ics rom
Nope, IIRC Oxygen ROM isn't compiled from the same sources as Hehappy's.
These mods should work on:
Hehappy's Lastkiss CM9
Neko's IcySnap CM9
JedduRocks WhiteHawk CM9 (It's hehappy's ROM with some scripts inside)
Xperia ICS V2 CM9 (It's a themed hehappy's ROM)
zeratos said:
Nope, IIRC Oxygen ROM isn't compiled from the same sources as Hehappy's.
These mods should work on:
Hehappy's Lastkiss CM9
Neko's IcySnap CM9
JedduRocks WhiteHawk CM9 (It's hehappy's ROM with some scripts inside)
Xperia ICS V2 CM9 (It's a themed hehappy's ROM)
Click to expand...
Click to collapse
Right, but it may brake the icysnap theme
Sent from my LG-P500 using xda premium
FPChaim said:
Right, but it may brake the icysnap theme
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Well, you could always try and let us know, the original files for IcySnap latest update are on the IcySnap uninstaller if you face any problem.
Note: I didn't faced any theme related problems while I tested all the mods, no problem at all to be honest.
zeratos said:
Well, you could always try and let us know, the original files for IcySnap latest update are on the IcySnap uninstaller if you face any problem.
Note: I didn't faced any theme related problems while I tested all the mods, no problem at all to be honest.
Click to expand...
Click to collapse
Well, I'm on cyan mobile righ now, I'm just saying that because this happened to my mod and I had to do one separated version for gingersnap
Sent from my LG-P500 using xda premium
zeratos said:
Well, you could always try and let us know, the original files for IcySnap latest update are on the IcySnap uninstaller if you face any problem.
Note: I didn't faced any theme related problems while I tested all the mods, no problem at all to be honest.
Click to expand...
Click to collapse
Wow soft keys in statusbar, it is tempting enough for me to switch to CM9 and test, great work, thanks!
Sent from my LG-P500 using xda premium
could the people who downloaded the 4x lock screen report back so people can know if it is working fine? D:
zeratos said:
could the people who downloaded the 4x lock screen report back so people can know if it is working fine? D:
Click to expand...
Click to collapse
Tested it, i can't unlock the phone
hrm... that sucks, maybe someone can send it to neko95, he wanted to port it or something IIRC ._.
zeratos said:
hrm... that sucks, maybe someone can send it to neko95, he wanted to port it or something IIRC ._.
Click to expand...
Click to collapse
Looks like he already has:
http://forum.xda-developers.com/showpost.php?p=34296746&postcount=5342
zeratos said:
hrm... that sucks, maybe someone can send it to neko95, he wanted to port it or something IIRC ._.
Click to expand...
Click to collapse
> Already did
Ah, that's awesome , are you going to add the blackberry unlock too? Or just that one?
Btw, I was messing with the lock screen and IT DOES UNLOCK THE SCREEN you just have to slowly drag it to your upper right corner.
zeratos said:
Ah, that's awesome , are you going to add the blackberry unlock too? Or just that one?
Btw, I was messing with the lock screen and IT DOES UNLOCK THE SCREEN you just have to slowly drag it to your upper right corner.
Click to expand...
Click to collapse
Can you do softkeys only without battery line as in original thread? It would be nice.
I tried lg 4x lock screen but it's not optimized for our screen size this is the reason why it doesn't work now
Sent from my LG-P500 using Tapatalk 2
myawan said:
Can you do softkeys only without battery line as in original thread? It would be nice.
Click to expand...
Click to collapse
Already did, the link is on the main post.
zeratos said:
Already did, the link is on the main post.
Click to expand...
Click to collapse
Thanks, is it working with GenetICS? Can we have home key instead of menu?
Sent from my LG-P500 using xda premium
myawan said:
Thanks, is it working with GenetICS? Can we have home key instead of menu?
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
No, none of these mods work on hehappy's last update (GenetICS).
Unless the developer of the mod shares the method to implement the keys it can't be done, sorry.
tapatalk said:
:thumbup::thumbup:
:beer::beer:
Sent from my GT-P3110 using Tapatalk HD
Click to expand...
Click to collapse
What? D:
I things its working just try.make backup first.
This issue has been important for me since I purchased my Verizon Droid Razr HD Maxx (consumer edition). I wanted to be able to remove the navbar on the bottom of the screen and take advantage of the full screen. Apparently AOKP roms have this capability and you can toggle via power button menu, but there is no AOKP version available for Razr HD. I tried all the mods I could find in the forums (generally written for Nexus phones/tablets). These are the following:
1. Adding the following line to build.prop: "qemu.hw.mainkeys=1" (without quotes). I tried this on the rooted stock JB rom and on Batakang rom. In both cases, the mod causes both navigation bar (bottom of screen) and status bar (top of screen) to disappear, with frequent UI crash messages.
2. Editing the framework-res\res\values\bools.xml and changing the value of ”config_showNavigationBar” from "true" to "false". This is discussed in detail in the following link: http://www.androidincanada.ca/news/make-your-galaxy-nexus-full-screen/ I did not try this mod on rooted stock JB (since I made a flashable zip out of my new framework-res.apk and safestrap won't allow zip installation in the stock slot). I tried this mod only on the Batakang rom. The mod causes both navigation bar (bottom of screen) and status bar (top of screen) to disappear, with frequent UI crash messages, similar to previous mod.
3. In retrospect, I wonder what would have happened if I tried both mods listed above at the same time. It may have worked. I may try this later. But then I installed CM10 beta rom by dhacker and tried the FullScreenToggleV2.apk mod provided in this link: http://forum.xda-developers.com/showthread.php?t=1497558 This worked like a charm, without any crashes or any disruption of the status bar. This apk inserts the "qemu.hw.mainkeys=1" line in your build.prop (the same as mod #1 listed above) but it's easier since you don't have to manually edit your build.prop. I tried this mod on rooted stock JB rom and Batakang rom, but it had the same (failed) results as in mod #1 above. So it only works for CM10 rom by dhacker on my XT926. I suspect it will also work in CM10 on XT925 (by epinter) but I don't have one to try.
Ideally there would be a mod that would work on the rooted stock JB rom. But short of that, at least it's reassuring that the Razr HD navbar can be removed in the CM10 rom. One could hope it may even be added as a CM10 feature later on
*** Important Note: if you attempt this, obviously you would need another way to navigate through your screens. I use LMT listed under mod #3 link above. There are other options available also. Just make sure to install some app that provides an alternative method of navigation before you try the mod.
Good luck!
Very interesting! Worth looking at this
ajal said:
This issue has been important for me since I purchased my Verizon Droid Razr HD Maxx (consumer edition). I wanted to be able to remove the navbar on the bottom of the screen and take advantage of the full screen. Apparently AOKP roms have this capability and you can toggle via power button menu, but there is no AOKP version available for Razr HD. I tried all the mods I could find in the forums (generally written for Nexus phones/tablets).
Ideally there would be a mod that would work on the rooted stock JB rom. But short of that, at least it's reassuring that the navbar can be removed in the CM10 rom. One could hope it may even be added as a CM10 feature later on
*** Important Note: if you attempt this, obviously you would need another way to navigate through your screens. I use LMT listed under mod #2 above. There are other options available also. Just make sure to install some app that provides an alternative method of navigation before you try the mod.
Good luck!
Click to expand...
Click to collapse
Hello, thank you very much for this. I've been looking for something like this. I guess my search ways are not the best.
About LMT, what devise did you choose? I chose Droid Razr, but I can't get the swipe gestures to work.
But I'm using swipepad for navigation, so no problem going from one app to the other. The problem I still need to solve is the menu key to show.
Anyway, thank you very much.
I use the PIE feature in LMT and don't pick any device (I guess it just goes with default). It just works. Haven't tried gestures since it typically needs two handed phone operation. Not sure what your menu button problem is but the PIE feature has a menu button as well.
Thank you for your answer. I will use Pie then.
I was using the Tablet UI, just so I can have more screen space, but as a result, most of my fonts were really small. Now I can go back to 320 dpi.
Thank you again.
Is it easy to disable as well?. Like if i tried it on cm10 and i wasn't liking it can i just uninstall it or factory reset or flash cm10 over again?
Sent from my DROID RAZR HD using Tapatalk 2
Yes. It's very easy to bring the navbar back. You don't need to factory reset or flash CM10 over again. If you use the app in mod#3 above, the app has a button to re-enable the navbar (remember, don't uninstall the app, just run it again and choose the other button). Or you could edit your build.prop and remove the "qemu.hw.mainkeys=1" line (reverse of mod #1 above, as mod #1 should work in CM10, and the app seems to do the same thing as mod #1). I think it also works if you change the value of "qemu.hw.mainkeys" to 0 instead of 1. You just have to reboot every time to see the changes.
did anyone get this to work on another rom i tried the build.prop edit but did the same as what OP said
I use the LMT and the Full screen toggle with Cm 10.1 with great success. No problem so far. Just be careful to have access to LMT all the time.
estuardo4 said:
I use the LMT and the Full screen toggle with Cm 10.1 with great success. No problem so far. Just be careful to have access to LMT all the time.
Click to expand...
Click to collapse
can you tell me where the full screen toggle is?? I've been hunting for it forever. CM10.1 beta here also
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enviado desde mi Motorola RAZR HD usando Tapatalk 2
I'm having system ui crash constantly on stock. Anybody found a way that works on stock?
@Pzyduck : how'd you do that
Sent from my XT925
My system UI on stock crashed as well, but my CM 10 works great. Bump for a rooted stock solution if available. But until then it's awesome that there is at least one working navbar mod out there
Sent from my DROID RAZR HD using xda app-developers app
rockstarr001 said:
can you tell me where the full screen toggle is?? I've been hunting for it forever. CM10.1 beta here also
Click to expand...
Click to collapse
It's an app
FullscreenToggle
Sent from my MotoAHD Maxx
Hopefully stock solution is found.
Remove NavBar But use Task Bar with no FC or issues.
ajal said:
This issue has been important for me since I purchased my Verizon Droid Razr HD Maxx (consumer edition). I wanted to be able to remove the navbar on the bottom of the screen and take advantage of the full screen. Apparently AOKP roms have this capability and you can toggle via power button menu, but there is no AOKP version available for Razr HD. I tried all the mods I could find in the forums (generally written for Nexus phones/tablets). These are the following:
1. Adding the following line to build.prop: "qemu.hw.mainkeys=1" (without quotes). I tried this on the rooted stock JB rom and on Batakang rom. In both cases, the mod causes both navigation bar (bottom of screen) and status bar (top of screen) to disappear, with frequent UI crash messages.
2. Editing the framework-res\res\values\bools.xml and changing the value of ”config_showNavigationBar” from "true" to "false". This is discussed in detail in the following link: http://www.androidincanada.ca/news/make-your-galaxy-nexus-full-screen/ I did not try this mod on rooted stock JB (since I made a flashable zip out of my new framework-res.apk and safestrap won't allow zip installation in the stock slot). I tried this mod only on the Batakang rom. The mod causes both navigation bar (bottom of screen) and status bar (top of screen) to disappear, with frequent UI crash messages, similar to previous mod.
3. In retrospect, I wonder what would have happened if I tried both mods listed above at the same time. It may have worked. I may try this later. But then I installed CM10 beta rom by dhacker and tried the FullScreenToggleV2.apk mod provided in this link: http://forum.xda-developers.com/showthread.php?t=1497558 This worked like a charm, without any crashes or any disruption of the status bar. This apk inserts the "qemu.hw.mainkeys=1" line in your build.prop (the same as mod #1 listed above) but it's easier since you don't have to manually edit your build.prop. I tried this mod on rooted stock JB rom and Batakang rom, but it had the same (failed) results as in mod #1 above. So it only works for CM10 rom by dhacker on my XT926. I suspect it will also work in CM10 on XT925 (by epinter) but I don't have one to try.
Ideally there would be a mod that would work on the rooted stock JB rom. But short of that, at least it's reassuring that the Razr HD navbar can be removed in the CM10 rom. One could hope it may even be added as a CM10 feature later on
*** Important Note: if you attempt this, obviously you would need another way to navigate through your screens. I use LMT listed under mod #3 link above. There are other options available also. Just make sure to install some app that provides an alternative method of navigation before you try the mod.
Good luck!
Click to expand...
Click to collapse
Upgrade to JB there are option in the forum if not available with your carrier and use Option 1, Ready it works OK, I use Gmd Gesture Control Instead of NavBar; Enjoy!!
BTW I use the FW from Canada and files to use it with telcel in Mexico, it works great, well menu appears and hide in some apps and you must try again but its usable.
Calvinx1 said:
Upgrade to JB there are option in the forum if not available with your carrier and use Option 1, Ready it works OK, I use Gmd Gesture Control Instead of NavBar; Enjoy!!
Click to expand...
Click to collapse
So on stock JB the build.prop edit works?
Sent from my XT925
saloums7 said:
So on stock JB the build.prop edit works?
Sent from my XT925
Click to expand...
Click to collapse
Yeah. That's what the full screen toggle app is doing. Just writes to the build.prop
Youngunn2008 said:
Yeah. That's what the full screen toggle app is doing. Just writes to the build.prop
Click to expand...
Click to collapse
I know I'd just rather do it myself and on ICS SystemUI crashes constantly after adding the line. Is that still happening on JB or does it hide it properly?
saloums7 said:
I know I'd just rather do it myself and on ICS SystemUI crashes constantly after adding the line. Is that still happening on JB or does it hide it properly?
Click to expand...
Click to collapse
I'm using the fullscreen toggle right now and no force closes
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This thread has been created strictly for
Questions & Troubleshooting
Specific to
The GNOME Project
This thread has been created for people to share issues, question and help
while using this version of The GNOME Project
DEVELOPMENT THREAD
Video Review of this ROM
Please do not clutter the Development thread with non development-related chatter
Frequently asked Questions
Frequently asked Questions
Q: What is Xposed?
A: http://forum.xda-developers.com/showthread.php?t=1574401
Q: Is this ROM rooted
A: Yes
Q: What Modules can I put here?
A: http://forum.xda-developers.com/showthread.php?t=2327541"
Q: Do you have any plans to add some customizations here in the future?
A: Speed Enhancements YES, Customizations, I leave them up to you, use Xposed.
Q: Can I flash kernel X, Y Z?
A: Yes as long your flashing the correct one. (JSS for JLS, JWR for JWR)
For Bug reporting please post it in the DEV THREAD all non related development topics you can post it here. Need to follow XDA Rules now. Thanks and God Speed!
CUSTOMIZE that stock ROM!!
-=The Gn0m3 Project tips and tricks=-
How to make this ROM look and act like any other ROM you want.
PA:
***Download App Settings from settings - xposed framework - download
***Install it and activate the module
***Reboot
***Open the app and search for Settings
***Click on it and flick the switch
***Change its settings accordingly to make it look like a tablet version of the settings app (you can change the res to do so) Some text may be ended with the three dots "..." so lower it's dpi too.
***Make some modifications to any app you want, and you juat got a PA ROM.
Click to expand...
Click to collapse
HALO:
***Download two apps: floating notifications app from the playstore, and xhalofloatingwindow module.
***Activate the module and reboot
***Go to Floating Notifications, then to App Notifications and enable all of them
***From there you have activated "HALO" and you can customize it from the Floating Notifications app. As foe the actual window, go to XHaloFloatingWindow and you can customize that one too.
Click to expand...
Click to collapse
CM:
***Download GravityBox from settings - xposed framework - download
***Install it and activate the module
***Reboot
***Open it, go to statusbar tweaks - pie controls and enable it
***Go back to statusbar tweaks then click QuickSettings management
***Make changes accordingly
***Go back to the first screen of the app, then click Display tweaks
***Expanded desktop mode should be set to hide navbar (at least)
***Reboot, and enjoy pie with custom QuickSettings panel... a CM ROM.
Click to expand...
Click to collapse
AOKP:
uhh... i've never tried AOKP, what are its specialties? lol
Click to expand...
Click to collapse
How to make use of all your 2GB of RAM:
Use V6 Supercharger with the ultimate jar tool to patch your minfrees, bulletproof your launcher, and make your phone a multitasking BEAST.
Link to the V6 thread: http://forum.xda-developers.com/showthread.php?t=991276
Click to expand...
Click to collapse
Volume Wake:
***Download MoDaCo Toolkit
***Scroll down to htc one, click enable volume wake.
***Do any kind of reboot (normal or soft)
Click to expand...
Click to collapse
what i got from gnome:
-custom launcher (nova)
-HALO (gravitybox)
-PIE (gravitybox)
-custom quick settings (gravitybox)
-custom theme (XThemeEngine)
-some changed dpi (AppSettings)
-custom navbar theme and a persistent menu button (Xblast Tools)
-custom lockscreen (XlockY)
can't seem to find in gravitybox nav bar height and volume wake or another module to do this modifications...if you can help pls
vraciu4you said:
can't seem to find in gravitybox nav bar height and volume wake or another module to do this modifications...if you can help pls
Click to expand...
Click to collapse
gravitybox - navigation bar tweaks, you can customize navnar height there.
as for volume wake, i don't have a module currently installed that has that.
Sent from my Mako
So the first release is the only release so far? Because in the original development forum in the op under expected features says more butter and speed. Eagerly awaiting this butter/speed update
Sent from my Nexus 4 using Tapatalk 4
TheNerd:] said:
So the first release is the only release so far? Because in the original development forum in the op under expected features says more butter and speed. Eagerly awaiting this butter/speed update
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
Yeah once I see a new changes or tweaks in Skia and Bionic I'll definitely update it, but the ROM is currently fast and stable so try it out.
So I really like this ROM thanks for it..
Only issue I been having is that google wallet doesn't work. I have no option to tap and pay, I finally was able to restore an old version of google wallet and its giving me this error: Google wallet is not yet available for your device or mobile network..
I am thinking maybe its a build.prop issue?
ogrillion said:
So I really like this ROM thanks for it..
Only issue I been having is that google wallet doesn't work. I have no option to tap and pay, I finally was able to restore an old version of google wallet and its giving me this error: Google wallet is not yet available for your device or mobile network..
I am thinking maybe its a build.prop issue?
Click to expand...
Click to collapse
I'll look that up. Thanks for the heads up!
Gn0m3 said:
I'll look that up. Thanks for the heads up!
Click to expand...
Click to collapse
Ok so I think I fixed it.. I just had to change a few values in the build.prop.. heres what I changed.
ro.product.model = Nexus 4 (changed from Mako)
ro.product.brand = google (changed from Android)
ro.product.name = occam (changed from full_mako)
Seemed to have fixed it
I can't seem to find out which module made the report button say "reboot" instead of "report"... very weird thing, but it's not that big of a deal.
Sent from my Mako
Another question, its not a huge deal and it might just be a module I have enabled..
But sometimes I get stuck in a weird loop.. like I am in a app hit the recent app menu, go into another app and then if I hit back key it goes back to the recent menu, then if I hit back again goes back to the app, hit back again it goes back to recent apps. etc etc
I don't think stock ever did that.. Its not a huge deal just odd?
*edit* I can't duplicate it but it happens..
ogrillion said:
Another question, its not a huge deal and it might just be a module I have enabled..
But sometimes I get stuck in a weird loop.. like I am in a app hit the recent app menu, go into another app and then if I hit back key it goes back to the recent menu, then if I hit back again goes back to the app, hit back again it goes back to recent apps. etc etc
I don't think stock ever did that.. Its not a huge deal just odd?
*edit* I can't duplicate it but it happens..
Click to expand...
Click to collapse
It might be the modules, This is pure Stock unless you enabled some modules into it.
ogrillion said:
Ok so I think I fixed it.. I just had to change a few values in the build.prop.. heres what I changed.
ro.product.model = Nexus 4 (changed from Mako)
ro.product.brand = google (changed from Android)
ro.product.name = occam (changed from full_mako)
Seemed to have fixed it
Click to expand...
Click to collapse
Yeah, forgot that since it's AOSP. Lol! I'll fix it on the next release.
Gn0m3 said:
Yeah, forgot that since it's AOSP. Lol! I'll fix it on the next release.
Click to expand...
Click to collapse
Np! Thank you again for a great rom.. Really loving it..
Question, if its too much trouble don't worry about replying.. But I been wanting to someday build my own ROMs from source, now I googled and found some easy enough guides about making a build enviroment and building from source etc.. But what I was curious about is building with different toolsets (like saber) and also what is involved in cherry picking from other roms.
Any good noob guides that you have used / know of that could help me learn?
Again thank you so much for a great rom
I'll guide you when you're available. Just PM me.
Riro Zizo said:
gravitybox - navigation bar tweaks, you can customize navnar height there.
as for volume wake, i don't have a module currently installed that has that.
Sent from my Mako
Click to expand...
Click to collapse
Found volume wake option in modaco toolkit under htc one options(after enable it you must do a soft reboot to make it work), for those that like this option on their rom :d
Sent from my Mako using Tapatalk 4
Guys, I'm sorry my laptop decided to go haywire again, but don't worry I was able to fix this before and I know I'll be able to fix this again. I'll keep ya'll updated.
vraciu4you said:
Found volume wake option in modaco toolkit under htc one options(after enable it you must do a soft reboot to make it work), for those that like this option on their rom :d
Sent from my Mako using Tapatalk 4
Click to expand...
Click to collapse
added to the third post, thank you very much.
Sent from my Mako
Ah bummer about the laptop.
Looks like what I got to do with my wife's laptop, her DC jack needs to be replaced and I keep putting it off.
Sent from my Mako using xda app-developers app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So...what does the "S" in our device name stand for u ask? Well...on your planet many may say it means "SUPER" or "SAMSUNG" or even "SKYHIGH" (lol...soon hopefully ). Just to be clear i am NOT a dev by any means...only another enthusiastic user looking to make a few improvements to his device so i & others may enjoy it more. I guess i should start out by saying that i created this rom for personal use simply so i wouldnt have to individually reapply every mod after a fresh firmware flash...my main motivation in doing so is to add back functions that samsung saw fit to remove from our tab such as the lockscreen widgets & quadview. So, while i will be open to suggestions to make this a better rom, i'm not actually interested in making it "pretty" with cosmetic changes since my first focus will be function over form...however anyone with expertise in theming is more than welcome to create flashable packages if u would like to. The only thing that has been removed is knox but i'm sure u can find a list of apks that are safe to eliminate elsewhere on xda (u can delete the files directly from the zip or uninstall after u flash)...with this being the first version please dont expect anything too fancy so for now just consider this a "stock plus stuff" WIP & with that being said i will now release for the rest of my fellow TAB S owners SuperSamsung V2!
ROM FEATURES! (see screenshots in second post...basic instructions located below photos)
1. Rooted
2. Deodexed
3. BusyBox
4. Init.d
5. Zip-Aligned
6. No Knox (this is the only thing that has been removed...anything else will need to be deleted from the zip or uninstalled after flash)
7. QuadView! (4-way multiwindow found in 12.2 note pro....thx @xperiacle)
8. Lock Screen Widgets! (FINALLY figured out how to re-enable these...thx @Goldie for the info)
9. Assistive Light Widget (adds led flashlight widget...other apps unnecessary)
10. SDfix (apps can now write to external memory...no need for playstore fix)
11. Floating Multiwindow (mysteriously missing along with the ability to rename shortcuts...both have been added back)
12. Stock Widgets in ANY Launcher! (now use the stock samsung magazine widgets in your favorite launcher or on the lockscreen...see pics in post #2 below)
13. Screen Mirror Fix! (no more broken wifi display with custom kernel/recovery...once again thx goes to @esgie)
14. AC3 Sound (can now play movies with ac3 in any video player...thx to @bodivas)
14. MultiWindow Mods (added the ability to use MOST apps in floating mode as well as more than one copy at the same time WITHOUT needing another app...also automatically adds all apps on your device to the availability list)
INSTALL INSTRUCTIONS!
1. Copy rom to device
2. Boot into download mode, flash custom recovery then IMMEDIATELY hold power, volume up & home to boot into cwm/twrp
3. install zip & wipe both caches
4. Open Supersu & when asked to update "su" binay choose "cwm/twrp" method...device will reboot with full root
5. I suggest installing nova launcher & even completely deleting all touchwiz/magazine apks for smoothness/memory purposes...this step is optional
6. If u need 4 way reboot, call & screen recording, volume key music control, or want to add more apps to multiwindow plus a bunch of other stuff then i HIGHLY recommend wanam xposed module...of course this is optional as well
KNOWN ISSUES!
1. lockscreen widgets can only be deleted in portrait orientation
2. music widget has no buttons & gallery widget is blank when used with other launchers
3. wifi passwords may be forgotten upon reboot...please flash the skyhigh kernel by @UpInTheAir for a fast fix (recommended anyway)
DOWNLOAD SuperSamsung V2 ROM!
https://www.androidfilehost.com/?fid=23622183712463223
^TAB S 8.4 WiFi/LTE V2
https://www.androidfilehost.com/?fid=23622183712463291
^TAB S 10.5 WiFi/LTE V2
Old V1 links
http://www.androidfilehost.com/?fid=23610159112655049
^TAB S 8.4 WiFi/LTE
http://www.androidfilehost.com/?fid=23610159112655062
^TAB S 10.5 WiFi/LTE
@UpInTheAir Whats been going on bro...dont know if u remember me but i was the one who ported multiwindow to the tab plus/7.7. Just wanted to touch bases & make this a formal request to include your kernel when u complete it...also i have one feature request if u can find time. Didnt want to pm u because im sure other users have been blowing your inbox up so feel free to send me a message or reply here...whatever is more convienient for u
@edan1979 i remember u being one of the original testers of my multiwindow mod on the P6800 so i just wanted to say thx...i hope that i'm not stepping on any toes by creating another t705 rom but i knew i had one killer feature which users would want (lockscreen widgets) plus a few missing multiwindow extras so i felt the need. So to both u & upintheair i just wanna say....i'm glad we are all on the same device now & look forward to making the most of this tab together :highfive:
here u go guys...a few photos along with basic instructions
LOCKSCREEN WIDGETS
View attachment 2896482
this is "hd widgets" being shown on the lockscreen...to add more widgets simply swipe right on your clock & u will see the "plus" icon which brings up the list
FLOATING MULTIWINDOWS
View attachment 2896490
not sure how no one noticed this was missing but here goes the floating mode...just "tap" the icon in the multiwindow launcher instead of dragging it to create a new movable/resizable app window (please note that not all apps support pop-up/floating view...however this has been modded in V2 so no extra apps are necessary to enable this feature)
QUADVIEW
View attachment 2896528
this is the 4-way multiwindow mode also known as "quadview" which was present on the 12.2 inch pro tabs...to set this up just drag 2 apps to split screen as u usually would then drag 2 more to any corner and they will highlight/snap in place. Also...for users who didnt know u can save a shortcut with up to 4 apps by touching the 2 lines at the bottom of the multiwindow bar, pressing create, then naming the combination whatever u would like to call it which will then be located at the top of the launcher when u open it
STOCK WIDGETS IN ANY LAUNCHER
although this screenshot APPEARS to be a regular magazine home page in the touch wiz launcher if u look a lil closer then you will notice the dock with the app icons...now all of your stock samsung widgets can be used used in the your favorite launcher such nova or apex as well as om the lockscreen
MULTI INSTANCE
ok i know what you're thinking...either "exactly how many browser windows do u need" or "how confused are u with all of that contradictory news" :laugh: As u have guessed...V2 now includes the ability to have more than one copy of the same app open at the same time
i wonder when will you pop up in this section... ^_^ with your custom...
@THEDEVIOUS1
no worry... the more the merrier... ^_^ i just release my normal build since no one does... kind of basic and nothing much.
Hi, I've just tried this rom, I'm still new and how to make the floating windows?
ayenzel said:
Hi, I've just tried this rom, I'm still new and how to make the floating windows?
Click to expand...
Click to collapse
This, plus how do I add lock screen widgets. I'm not seeing it in settings.
Edit: Never mind. Figured out the lock screen.
Edit 2: Just saw the directions in post #1 for floating windows. Everything seems to be working fine. Thanks.
Sent from my NCC-1701 using Tapatalk.
Downloading now. So excited to see ROMs showing up for my 8.4"
Sent from my SM-T700 using Tapatalk
Can't wait to check it out! Having trouble downloading it... Is it just me?
Samsung Galaxy SIII / Samsung Galaxy Tab S 8.4
Very nice!!!
Thank you Op for the Rom!
My WiFi won't turn on -did a clean flash, rebooted a couple of times. Any help?
ayenzel said:
Hi, I've just tried this rom, I'm still new and how to make the floating windows?
Click to expand...
Click to collapse
riker147 said:
This, plus how do I add lock screen widgets. I'm not seeing it in settings.
Edit: Never mind. Figured out the lock screen.
Edit 2: Just saw the directions in post #1 for floating windows. Everything seems to be working fine. Thanks.
Sent from my NCC-1701 using Tapatalk.
Click to expand...
Click to collapse
see second post for more info...thx
glensta said:
Thank you Op for the Rom!
My WiFi won't turn on -did a clean flash, rebooted a couple of times. Any help?
Click to expand...
Click to collapse
well...i was waiting on that since i had been having bluetooth/wifi issues which prevented me from releasing the rom earlier. Most important question...which device are u using (size & type)? One quick fix may be to change the "securestorage" setting in the build prop from "false" back to "true"...it may be that your modem/kernel dont match the rest of the rom which would mean u need to flash the NG2 stock odin firmware before u flash SuperSamsung. Also...which recovery are u using just out of curiosity?
THEDEVIOUS1 said:
see second post for more info...thx
well...i was waiting on that since i had been having bluetooth/wifi issues which prevented me from releasing the rom earlier. Most important question...which device are u using (size & type)? One quick fix may be to change the "securestorage" setting in the build prop from "false" back to "true"...it may be that your modem/kernel dont match the rest of the rom which would mean u need to flash the NG2 stock odin firmware before u flash my rom. Also...which recovery are u using just out of curiosity?
Click to expand...
Click to collapse
I'm using the 10.5 variant (SM-T800) and yes I had not odined the newer NG2 firmware. I just odined that now and the WiFi is working so that was probably it. I'll flash your rom in a bit after I'm set up. I was using openrecovery-twrp-2.7.1.1-chagallwifi for my recovery. I'm betting flashing the Odin firmware will do the trick.
Thank you :good:
Good stuff mate. Yes, I remember and thanks again for the work you did for my 7.7 ROM. A lot of users enjoyed it.
Just arrived through the door after being away the last month. Will start to look at the kernel in good time. Family and sleep time first.
There might be some issues with the kernel and newer firmware. Still getting feedback to get things narrowed down. ...
There is a feature request in the kernel thread (Web view). Can't promise much as I'm no Dev, but am going to rebase the kernel from another source and with the ramdisk from the latest firmware. Might start downloading now and setup github.
Will also be looking at 10.5" kernel too, so lots to hopefully look forward to
Will look forward to trying your ROM, but for the moment I use and test on rooted official firmware as I don't want to debug the user's own ROM.
In my kernel, I set secure storage to false in the ramdisk and fixes the wifi issue.
UpInTheAir said:
Good stuff mate. Yes, I remember and thanks again for the work you did for my 7.7 ROM. A lot of users enjoyed it.
Just arrived through the door after being away the last month. Will start to look at the kernel in good time. Family and sleep time first.
There might be some issues with the kernel and newer firmware. Still getting feedback to get things narrowed down. ...
There is a feature request in the kernel thread (Web view). Can't promise much as I'm no Dev, but am going to rebase the kernel from another source and with the ramdisk from the latest firmware. Might start downloading now and setup github.
Will also be looking at 10.5" kernel too, so lots to hopefully look forward to
Will look forward to trying your ROM, but for the moment I use and test on rooted official firmware as I don't want to debug the user's own ROM.
In my kernel, I set secure storage to false in the ramdisk and fixes the wifi issue.
Click to expand...
Click to collapse
no problem at all on the assistance with the rom...looks like it might be my turn to phone in a favor in the near future. yeah...i didnt want to touch the kernel in mine because thats actually what breaks the screen mirroring NOT root. As long as u have a factory recovery & kernel it will work ok...also as u have pointed out in the other thread there is a file that can be hacked to enable it but unfortunately it seems that the location still hasnt been found on 4.4.2 exynos devices & i know from personal experience on my lte tab pro with the snapdragon that it only worked with an altered recovery even with the fix...meaning if the kernel was touched then it would still be broken. The guy who hacked our file (@esgie) came up with a simple build prop edit that is supposed to work around that but i had to file an insurance claim on my pro & ended up replacing it with the tab s so i never got chance to test. Anyway...i said all of that to say that its believed that wireless display runs sum sort of checksum against the key/signature of the boot image or perhaps thats part of the same trustzone/secure storage issue as wifi. Speaking of which...I assumed that too which is why i already altered the build prop to false but before that i was running into a weird camera/bluetooth issue which i tracked to knox traces still left in the zip.
@ anyone with a definite answer...a quick question or 2 that are a bit off topic
has someone been able to confirm that the sixaxis app works with our tab through a bluetooth ONLY connection...in other words WITHOUT needing to be plugged into the tab with an otg cable?
Looking forward to trying this when I get home
So is this for T700 or T705? Wouldn't want to flash the wrong thing and break wifi etc. It's not clear in the thread title.
Does it have 4 way restart menu?
killall said:
So is this for T700 or T705? Wouldn't want to flash the wrong thing and break wifi etc. It's not clear in the thread title.
Click to expand...
Click to collapse
I flashed it on my T700 and have no issues. Working perfectly.
LoVeRice said:
Does it have 4 way restart menu?
Click to expand...
Click to collapse
Does not
killall said:
So is this for T700 or T705? Wouldn't want to flash the wrong thing and break wifi etc. It's not clear in the thread title.
Click to expand...
Click to collapse
I apologize if i didnt make it clear enough but this is for ALL EXYNOS VERSIONS of the TAB S...if u look at the download section of the first post they are labeled with both wifi & lte
LoVeRice said:
Does it have 4 way restart menu?
Click to expand...
Click to collapse
le0.br4zuc4 said:
I flashed it on my T700 and have no issues. Working perfectly.
Does not
Click to expand...
Click to collapse
although its easy enough to add i purposely tried not to include alterations that were already handled by xposed modules....well one being wanam in particular especially when u consider all the work it would take to modify & maintain the code on 4 different devices. it does so much & is so good at it that even though i like my mods built directly in ive gotten used to installing it on every new device i own...so with that said if u need 4 way reboot, call & screen recording, volume key music control, want to add more apps to multiwindow plus a bunch of other stuff then i HIGHLY recommend wanam xposed module. If i find that a lot of users are steering clear of this rom because its missing that one feature then i may put it in an update but to be honest i dont see why they would...u will still need to add extra apps to your device for at least multiwindow so i say why not use xposed
First of all, great ROM! Thank you for your work!
I have a SM-t705 , the 8.4 LTE version.
I flashed STOCK NG2 and then this ROM and it works superb.
Only one issue: CPU Spy reports that Deep Sleep is never achieved. When it is iddle , it stays at 250Mhz.
Anyone else having this problem? Any clues on how to solve it?
Thank you.
glensta said:
I'm using the 10.5 variant (SM-T800) and yes I had not odined the newer NG2 firmware. I just odined that now and the WiFi is working so that was probably it. I'll flash your rom in a bit after I'm set up. I was using openrecovery-twrp-2.7.1.1-chagallwifi for my recovery. I'm betting flashing the Odin firmware will do the trick.
Thank you :good:
Click to expand...
Click to collapse
where did you get the file for NG2 firmware to ODIN it? Thanks!
I also am running SM-T800 ... oh and how did you root this?