FAIL - Galaxy S 4 Q&A, Help & Troubleshooting

The following error occurs while I try to root my Galaxy S4 GT-I9505 android 4.22
with Odin
<ID:0/016> Added!!
<ID:0/016> Removed!!
<ID:0/016> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> recovery.img
<ID:0/016> NAND Write Start!!
<ID:0/016>
<ID:0/016> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and the first button is Red - FAILED
PLEASE REPLY ASAP!

Deleted

Adnan.A said:
Wrong file You Root file not for I9505
Click to expand...
Click to collapse
Huh?

Deleted

Adnan.A said:
CF-Auto-Root-jflte-jfltexx-gti9505.zip for Galaxy S4 I9505
http://forum.xda-developers.com/showthread.php?t=2219803
Click to expand...
Click to collapse
I used that and Fail still comes up. Keep in mind that I already have superuser installed but it is not working.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Added!!
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> recovery.img
<ID:0/017> NAND Write Start!!
<ID:0/017> cache.img.ext4
<ID:0/017> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/017> Removed!!
<ID:0/017> Added!!

Deleted

Related

[Q] How do I install Stock Rom on Galaxy S4

Hello,
I'm trying to flash stock rom for my Galaxy S4 through Odin v3.07, but whenever I try to flash it I get the following error:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl2.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Can anybody help me or tell me what I'm doing wrong.
Thanks in advance!

Help soft bricked my wives phone. Odin fails

I originally put on Cyanogenmod but tried to change it back to stock. I tried up use Odin to put stock on but i think i may have put on a wrong version.
I am from the UK and have the 505 version. I9505XXUFNC4.
Odin now says.
<ID:0/016> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9505OXAHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/016> Odin engine v(ID:3.1005)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> SingleDownload.
<ID:0/016> aboot.mbn
<ID:0/016> NAND Write Start!!
<ID:0/016> sbl1.mbn
<ID:0/016> sbl2.mbn
<ID:0/016> sbl3.mbn
<ID:0/016> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/016> Removed!!
<ID:0/016> Added!!
This is the log from a new PDA file
<ID:0/016> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_I535VRUCML1_I535VZWCML1_2198062_REV09_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> sbl1.mbn
<ID:0/016> NAND Write Start!!
<ID:0/016> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_I535VRUCNC1_I535VZWCNC1_2198062_REV09_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/016> Removed!!
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> sbl1.mbn
<ID:0/016> NAND Write Start!!
<ID:0/016> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/016> Removed!!
<ID:0/016> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUHOB7_I9505BTUHOB4_I9505XXUHOB7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> sbl1.mbn
<ID:0/016> NAND Write Start!!
<ID:0/016> sbl2.mbn
<ID:0/016> sbl3.mbn
<ID:0/016> rpm.mbn
<ID:0/016> aboot.mbn
<ID:0/016> tz.mbn
<ID:0/016> boot.img
<ID:0/016> recovery.img
<ID:0/016> system.img.ext4
<ID:0/016> modem.bin
<ID:0/016> NON-HLOS.bin
<ID:0/016> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/016> Removed!!
<ID:0/016> Added!!
Went further but still failed.
I changed the usb hub and the file went through but the screen is black with only a wifi symbol and the battery logo.
applelolk said:
I changed the usb hub and the file went through but the screen is black with only a wifi symbol and the battery logo.
Click to expand...
Click to collapse
You flashed a wrong firmware version for your device.
1. You have to flash this firmware now: HERE via ODIN but unmarking "Auto Reboot".
2. Let the process finish and pull off the battery.
3. Pull it in again, boot in Stock Recovery and Wipe data/Factory reset.
4. Reboot your device normally.

Problem returning from 5.1.1 to 4.4.4 N910c

good morning I have a problem when you want to return install the Android 5.1.1 rom N910CXXU2COJ5_N910CUUB2COJ2_N910CXXU1COJ5_HOME.tar and now I can not go back to 4.4.4 .
Odin says:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910CXXU1ANK5_N910CUUB1ANL1_N910CXXU1ANL4_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
and the cell appears a legend
SW REV. CHECK FAIL DEVICE:2, BINARY:1
I have the version COJ5
Thank you
After you install COJ5, you are stuck to it. There is no easy way to downgrade it as now.

when i try to flash my s5 i get this error <ID:0/017> Added!! <OSM> Enter CS for MD5.

when i try to flash my s5 i get this error <ID:0/017> Added!! <OSM> Enter CS for MD5.
when i try to flash my s5 g900f i get this error through odin... please help... i am from ghana
<ID:0/017> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1ANE3_G900FOXX1AND3_G900FXXU1ANE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> sbl1.mbn
<ID:0/017> NAND Write Start!!
<ID:0/017> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/017> Removed!!

Need Some help Unbricking a Soft-Bricked Tab SW-337A

Here's the odin message,
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T337AUCU1ANF4_T337AATT1ANF4_T337AUCU1ANF4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Help Would be much appreciated!
SpiffyM said:
Here's the odin message,
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T337AUCU1ANF4_T337AATT1ANF4_T337AUCU1ANF4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Help Would be much appreciated!
Click to expand...
Click to collapse
Download and use this instead of the NF4 file, should work like a charm. https://mega.nz/#!0Q4AXQgZ!Df-pTUo6eA80kGTrzpYCAJ0ilGbUzMYCE4nRtvume6s
CocaFoca said:
Download and use this instead of the NF4 file, should work like a charm.
Would this go in place of the current T337 file in the PDA section of ODIN?
Click to expand...
Click to collapse
CocaFoca said:
Download and use this instead of the NF4 file, should work like a charm.
It did not work. Here's the odin error.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> T337AUCU2BOH4_T337AATT2BOH4_HOME.tar.md5 is invalid.
<OSM> End...
Click to expand...
Click to collapse
CocaFoca said:
Download and use this instead of the NF4 file, should work like a charm.
After all the previous items, I found a previous valid file for the PDA section, here's odins message.
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse

Categories

Resources