[DEVELEOPMENT][DISCUSSION]HTC Wildfire Buzz - Wildfire General

As we discussed much in my CM10.1 thread I thought to make a discussion thread for further development.I hope this is not against forum rules and if please tell me and I'll change/delete it.
Rules:
-Don't ask noob question like: "How to root,...!"
-Don's spam this thread
-Only use this for development purpose
Now feel free to post everything about development for our HTC Buzz!

for cyanogenmod 10+ look at this ----> http://review.cyanogenmod.org/#/c/12089/2/services/surfaceflinger/SurfaceFlinger.cpp
This is the commit that fixed screenshot, task previews and other openGL es related stuff in ICS

Just found out my cpu is 64-bit, so im installing ubuntu 13.10 64-bit and then syncing up CM10.1 to fix errors with you sasa

Thanks for the link and all the best while fixing bugs.Anyways yesterday my hard disk got broken so all my data is lost so my source is lost!
I need to sync it again now!
I will also begin now and then try to fix the bugs too!

Yeah this thread should be not deleted at all
Also I'm going to install ubuntu for my new laptop, now that I've got my own i can start developing even further more
And I'm going to start helping fixing bugs in cm9
Also i'll try make a new kernal for HTC buzz cm9

Stone. Cold said:
Yeah this thread should be not deleted at all
Also I'm going to install ubuntu for my new laptop, now that I've got my own i can start developing even further more
And I'm going to start helping fixing bugs in cm9
Also i'll try make a new kernal for HTC buzz cm9
Click to expand...
Click to collapse
Kernel development is harder than you think... ive been trying this past week to update the kernel, no lck, i cant find the right sources to base the kernel on:/

faZevoLv said:
Kernel development is harder than you think... ive been trying this past week to update the kernel, no lck, i cant find the right sources to base the kernel on:/
Click to expand...
Click to collapse
How hard exactly? Then in that case, i'll still try. If no luck then

Yes, Kernel Development is harder than compiling ROMs.The first build is a pain.If it boots up it's pretty good.Then only adding the features is over.But if you don't have proper source like for the Buzz(We don't have 3.x Source), you have to search for alternate source.Like me I found a source from LG Optimus Me!
It has same Chipset as our Buzz and is also ARM-V6.So when we use our config of Buzz it should compile and boot up!

found a good kernel source as mentioned by you sasa ----> https://github.com/PecanCM/lge-kernel-pecan/tree/android-msm-3.0-jb
Ill try it after building PAC cm10

faZevoLv said:
found a good kernel source as mentioned by you sasa ----> https://github.com/PecanCM/lge-kernel-pecan/tree/android-msm-3.0-jb
Ill try it after building PAC cm10
Click to expand...
Click to collapse
Thanks!

faZevoLv said:
found a good kernel source as mentioned by you sasa ----> https://github.com/PecanCM/lge-kernel-pecan/tree/android-msm-3.0-jb
Ill try it after building PAC cm10
Click to expand...
Click to collapse
Yes this one I meant.Sorry for not giving the link but thanks that you mentioned.

Building PAC cm10 now!!!!

faZevoLv said:
Building PAC cm10 now!!!!
Click to expand...
Click to collapse
All the best, friend!
Waiting for it.But the name isn't PAC CM10, it's only PAC Jelly Bean

SasaKovacic said:
All the best, friend!
Waiting for it.But the name isn't PAC CM10, it's only PAC Jelly Bean
Click to expand...
Click to collapse
I know, but its based on CM10, that's why I said it
Oh and I used a CM9 patch to fix task previews and other stuff, probably some speedup too!

faZevoLv said:
I know, but its based on CM10, that's why I said it
Oh and I used a CM9 patch to fix task previews and other stuff, probably some speedup too!
Click to expand...
Click to collapse
That's good to know, also all is well and going good?

Stone. Cold said:
That's good to know, also all is well and going good?
Click to expand...
Click to collapse
Yep nearly finished compiling Jellybean 4.1.2 should be ~3 times faster with my patch

faZevoLv said:
Yep nearly finished compiling Jellybean 4.1.2 should be ~3 times faster with my patch
Click to expand...
Click to collapse
Awesome!
Glad to know, also it will be the first ever PAC MAN rom
Thanks jord, everyone must appreciate your work

faZevoLv said:
Building PAC cm10 now!!!!
Click to expand...
Click to collapse
Is not better to make a port ? Is easier no ?
Sent from my HTC Wildfire using xda premium

Pator57 said:
Is not better to make a port ? Is easier no ?
Sent from my HTC Wildfire using xda premium
Click to expand...
Click to collapse
Porting jelly bean roms is much much much harder than ICS or GB!! They always reboot and bootloop with many errors:/

I built PAC and it boots!!!!!
but paranoid preferences don't work:/ I know how to fix it but ill have to recompile which will take another day:/

Related

DREAMteam Froyo source code

Hi there,
I'm trying to build some froyo rom for g1 from source. The problem is that lot of stuff lying here is old, unusable slow or hopelessly broken. The only rom that seems to work is hxxp://forum.xda-developers.com/showthread.php?t=1273549
[Rom][2.2.3 AOSP] DREAMteam Froyo v2.0.0 [9/3/2012]
The kernel source can be easy found by Ezterry
hxxps://github.com/ezterry/kernel-biff-testing/tree/ezgb-2636-v1.5.2-20111106
but I can't find any (git) repo or hint how the "DREAMteam" guys built it. :crying:
Thanks in advance for any hints,
ptau
pm the devs
Sent from my HTC Vision using xda premium
All you need for building the kernel is here at this url:
https://github.com/ezterry/manifest-gingerbread-DS/blob/gingerbread/README.mkdn
It used to be on the ezgingerbread rom thread but seems he has a link to the guide which is now on github ^_^
Sent from my GT-I9300 using xda app-developers app
xillius200 said:
All you need for building the kernel is here at this url:
https://github.com/ezterry/manifest-gingerbread-DS/blob/gingerbread/README.mkdn
It used to be on the ezgingerbread rom thread but seems he has a link to the guide which is now on github ^_^
Click to expand...
Click to collapse
Building the kernel for froyo or building the ezgingerbread rom is no problem:
http://forum.xda-developers.com/showthread.php?t=882356
Unfortunately (Ez)gingerbread is an overkill for the tiny G1
My problem is to find out how to build a froyo rom that is not
broken (e.g. cm6). The DREAMteam's
http://forum.xda-developers.com/showthread.php?t=1273549
rom seems to have the most bugs fixed, but again I don't know
how to build it. I need the right android manifest, git repo, etc.
The DREAMteam changelog is astonishingly sparse:
V2.0.0 - 2012-03-09
Update to android 2.2.3. Some changes from 1.9.2 included.
Thanks ptau
ptau said:
Building the kernel for froyo or building the ezgingerbread rom is no problem:
http://forum.xda-developers.com/showthread.php?t=882356
Unfortunately (Ez)gingerbread is an overkill for the tiny G1
My problem is to find out how to build a froyo rom that is not
broken (e.g. cm6). The DREAMteam's
http://forum.xda-developers.com/showthread.php?t=1273549
rom seems to have the most bugs fixed, but again I don't know
how to build it. I need the right android manifest, git repo, etc.
The DREAMteam changelog is astonishingly sparse:
V2.0.0 - 2012-03-09
Update to android 2.2.3. Some changes from 1.9.2 included.
Thanks ptau
Click to expand...
Click to collapse
Well I got in touch with tval aint spoke to him for a while. He said a repo was never made for DREAMteam froyo and the way in which it was created some by pushing files not everything was coding, there was not much point in a repo and he has not got around to it lol and I totally agree with him. So best thing would be to compile a rom from plain AOSP and begin to modify it yourself, this way you learn and better understand rom creation. Plus doing it straight from AOSP will give you the updates you want and in most ways will actually be better ^^ If you want any help I could always introduce you to a few devs see if they would be willing to help ^^
PS: From how you worded your first post it sounded like you were trying to compile just the ezterry kernel xD so I apologise that I misunderstood ^^
99%
xillius200 said:
As far as I remember when it was first started they never had a repository and unless it has changed they still do not lol ill email tvall later lol seems Ldrifta is gone.... :'( if not you can always just compile a normal aosp and then customize it to your liking and speed helps you learn on how to speed up roms that way unlike having an already fast rom of which you learn less from.
Click to expand...
Click to collapse
Thanks. After I looked in the zip, I thought something like that.
Seriously, you don't need speed with this hardware.
Think of cheap, stable, not battery eating
and hackable ARM11 development platform
After that incident with kernel.org they removed all the old android repos
so I have hard times to find the G1 pieces again. ezterry rocks. The kernel
changes are in his git, I could tweak+build the kernel with all the
modules I needed.
Let's see how to get the aosp together ...
(any hints greatly appreciated
PS: From how you worded your first post it sounded like you were trying to compile just the ezterry kernel xD so I apologise that I misunderstood ^^
Click to expand...
Click to collapse
I know, but my German is much better, I swear :angel:
Well.. I'd be happy to help rebuild my rom. Been wanting to set up a repo, but I'm lazy..
tvall said:
Well.. I'd be happy to help rebuild my rom. Been wanting to set up a repo, but I'm lazy..
Click to expand...
Click to collapse
Thanks for the email with tips.
I try to document the building process here:
hxxps://sites.google.com/site/aospdream/
As always, any hints or help from anybody are greatly appreciated ...
Thanks,
ptau

The Unofficial CyanogenMod Series - added aokp-jellybean test build

Hi all I will be working this a little. But don't expect anything to great. I don't have a whole lot of time to work on this. I bricked my phone and not having much luck getting it replaced. So I won't be working on this to much until I can get a new phone as I will be spending all my time working.
Most stuff posted here is probably gonna be untested.
I will be posting cm7, cm9, and cm10 builds here.
Idk if any of these work.
Don't get mad at me if they brick your device. Infact treat them with a high chance of brickage, unless otherwise noted.
CyanogenMod 7:
Code:
[CENTER]
[B][U][COLOR="Blue"][SIZE="2"]Download:[/SIZE][/COLOR][/U][/B]
[URL="https://www.dropbox.com/s/1ct15i6fxbprpjj/cm-7-20120720-UNOFFICIAL-captivatemtd.zip"]cm-7-20120720-UNOFFICIAL-captivatemtd.zip[/URL]
[B][U][SIZE="2"][COLOR="Blue"]Google Apps for Gingerbread:[/COLOR][/SIZE][/U][/B]
[URL="http://goo.im/gapps/gapps-gb-20110828-signed.zip"]gapps-gb-20110828-signed.zip[/URL][/CENTER]
CyanogenMod 9:
Code:
[CENTER][B][U][COLOR="Blue"][SIZE="2"]Downloads:[/SIZE][/COLOR][/U][/B]
[URL="https://www.dropbox.com/s/p0n6myyedm7pyx4/cm-9-20120720-UNOFFICIAL-captivatemtd.zip"]cm-9-20120720-UNOFFICIAL-captivatemtd.zip[/URL]
[B][U][SIZE="2"][COLOR="Blue"]Google Apps for ICS:[/COLOR][/SIZE][/U][/B]
[URL="http://goo.im/gapps/gapps-ics-20120429-signed.zip"]gapps-ics-20120429-signed.zip[/URL][/CENTER]
CyanogenMod 10:
Code:
[CENTER][B][U][COLOR="Blue"][SIZE="2"]Download:[/SIZE][/COLOR][/U][/B]
[URL="http://www.mediafire.com/?ndt440n4ux0ctaz"]cm-10-20120727-UNOFFICIAL-captivatemtd.zip[/URL]
[B][U][COLOR="Blue"][SIZE="2"]Old builds:[/SIZE][/COLOR][/U][/B]
[URL="http://www.mediafire.com/?2n75vev3qvcl417"]cm-10-20120723-UNOFFICIAL-captivatemtd.zip[/URL]
[URL="http://www.mediafire.com/?d89z35acc2cpaxr"]cm-10-FIXED_RECOVERY-captivatemtd.zip[/URL]
[SIZE="2"][B][U][COLOR="Blue"]Google Apps for JellyBean:[/COLOR][/U][/B][/SIZE]
[URL="http://goo.im/gapps/gapps-jb-20120726-signed.zip"]gapps-jb-20120726-signed.zip[/URL]
[URL="http://www.mediafire.com/?xje9p4hl1qv56qz"]inverted_gapps2-jb-20120715.zip[/URL]
[/CENTER]
Recovery:
Code:
[CENTER][B][U][SIZE="2"][COLOR="Blue"]Fake Flashes:[/COLOR][/SIZE][/U][/B]
Touch recovery 6 Fake flash: [URL="http://www.mediafire.com/?k240g28o332apgy"]touch_recovery_fake_flash.zip[/URL]
This is a preview most ways to navigate doesn't work. Normal recovery functions work though
Thanks to:
[URL="http://forum.xda-developers.com/member.php?u=2492461"]sk8erwitskil[/URL] for the source
[/CENTER]
Install instructions:
Code:
[CENTER]Make a backup......
Factory reset........
Mounts and storage > format system.......
Advanced > Wipe Dalvik Cache.......
Install Rom......
Install gapps.....
Reboot......
Go to Rom Manager and fix permissions......
Reboot......
Your all set.........[/CENTER]
Upgrading From a Previous Version:
Code:
[CENTER]Reboot to Recovery
Go to mounts and storage and format system...
Flash latest rom....
If coming from a different build like from cm9 to cm10
then follow the install instructions
When going from cm10 to cm10 flash latest cm10 zip
When going from cm9 to cm9 flash latest cm9 zip[/CENTER]
AOKP- JellyBean test build
Code:
[CENTER][SIZE="3"][B][U]Download:[/U][/B][/SIZE] [URL="http://www.mediafire.com/?9eud3x8c4pq4atd"]
AOKP-JB-captivate-b1.zip[/URL]
[SIZE="3"][B][U]Doesn't work:[/U][/B][/SIZE]
Rom Control force closes Settings
Messaging force closes
Still being tested. Please provide feedback[/CENTER]
cm7 builds:
cm-7-20120720-UNOFFICIAL-captivatemtd.zip
gapps-gb-20110828-signed.zip
Click to expand...
Click to collapse
what's different from Official version this unofficial version?
p.s: sorry for my english
Someone please confirm but I thought releases weren't supposed to be put on xda without the op having a device to test it on? Just curious...
Sent from my SGH-I897 using xda premium
I have this device. I bricked my skyrocket
Sent from my SGH-I897 using Tapatalk 2
levanr said:
what's different from Official version this unofficial version?
p.s: sorry for my english
Click to expand...
Click to collapse
I'm not sure. I just like making my own builds and I figured I'd post them.
Sent from my SGH-I897 using Tapatalk 2
levanr said:
what's different from Official version this unofficial version?
p.s: sorry for my english
Click to expand...
Click to collapse
"unofficial" is beta version that has some problem, "official" is perfect version that has no problem.
gmillz said:
Hi all I will be working this a little. But don't expect anything to great. I don't have a whole lot of time to work on this. I bricked my phone and not having much luck getting it replaced. So I won't be working on this to much until I can get a new phone as I will be spending all my time working.
Most stuff posted here is probably gonna be untested.
I will be posting cm7, cm9, and cm10 builds here.
Idk if any of these work.
Don't get mad at me if they brick your device. Infact treat them with a high chance of brickage, unless otherwise noted.
Click to expand...
Click to collapse
-Downloading
If they wont work... you need a logcat or something .. am I right ?
How to install: ?
Features: ?
Sent from my GT-I9000 using xda premium
Are these the same available on get.cm?
unnecessary (sorry)
Sent from my GT-I9000 using Tapatalk 2
Gore785 said:
How to install: ?
Features: ?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
if you dont understand how to install please leave the area lol
What's the point of this thread?
CheesyNutz said:
if you dont understand how to install please leave the area lol
Click to expand...
Click to collapse
I've honestly lost count of all your posts that offer absolutely nothing helpful or relevant to the discussion.
I understand theres not much of a point to this. The main reason for this thread is cm10 as all the other cm10 roms don't have the stock cm kernel. But since I build the other ones anyways i figured I'd post them. And I'll post install instructions.
kevinnol said:
-Downloading
If they wont work... you need a logcat or something .. am I right ?
Click to expand...
Click to collapse
Definitely. Logcats would be great
CheesyNutz said:
if you dont understand how to install please leave the area lol
Click to expand...
Click to collapse
Meant that as in anything we should do in specific before, during, or after install Like fix permissions?
Sent from my GT-I9000 using xda premium
johnnyrichter said:
What's the point of this thread?
I've honestly lost count of all your posts that offer absolutely nothing helpful or relevant to the discussion.
Click to expand...
Click to collapse
gmillz said:
I understand theres not much of a point to this. The main reason for this thread is cm10 as all the other cm10 roms don't have the stock cm kernel. But since I build the other ones anyways i figured I'd post them. And I'll post install instructions.
Click to expand...
Click to collapse
So...if you understand there's not much of a point, why post at all? Also, FYI, in regard to your OP: "to" is not the same as "too", and "infact" is not a word. Just sayin'.
adzidek said:
So...if you understand there's not much of a point, why post at all? Also, FYI, in regard to your OP: "to" is not the same as "too", and "infact" is not a word. Just sayin'.
Click to expand...
Click to collapse
Because this is the only cm10 rom with the stock cm kernel. I meant there was not much reason to post any of the other builds
gmillz said:
Because this is the only cm10 rom with the stock cm kernel. I meant there was not much reason to post any of the other builds
Click to expand...
Click to collapse
You'll likely receive a lot of flak over re-hosting/posting stuff as you've seen thus far, but if you're offering something you've re-worked in any way(which is what I understand you're doing) then I'd stick with just that and link to other threads in your OP if necessary.
If you compiled from CM10 source here we have CM10 kernel for Captivate (no datadata partition).
This is very interesting.
Thank you very much: if compiling went well this is really an important step for JB on Cappy and now we can run also official Pawitp builds.
Monfro said:
If you compiled from CM10 source here we have CM10 kernel for Captivate (no datadata partition).
This is very interesting.
Thank you very much: if compiling went well this is really an important step for JB on Cappy and now we can run also official Pawitp builds.
Click to expand...
Click to collapse
Yes this is compiled from source specifically for the captivate.
And compiles with no errors

[Q] AOSP Rom

Is it possible to compile an AOSP Rom for our Galaxy Y.
If so can any developer compile and post it.
Unknown X said:
Is it possible to compile an AOSP Rom for our Galaxy Y.
If so can any developer compile and post it.
Click to expand...
Click to collapse
Maybe not
Sent from my GT-S5360 using Xparent ICS Tapatalk 2
hmahadi98 said:
Maybe not
Sent from my GT-S5360 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
Why not?
Unknown X said:
Why not?
Click to expand...
Click to collapse
As we don't have the source of broadcom.. after broadcom release their source we will be able to port all type rom including cm.
hmahadi98 said:
As we don't have the source of broadcom.. after broadcom release their source we will be able to port all type rom including cm.
Click to expand...
Click to collapse
Even then i think AOSP won't be possible for SGY. Hardware Limitations.
anasdcool71 said:
Even then i think AOSP won't be possible for SGY. Hardware Limitations.
Click to expand...
Click to collapse
I think someone could compile AOKP/AOSP. For HTC Explorer (in my opinion has a hadware with similar limitations) there are four major Roms so far: CM9, CM10, AOKP and Pacman.
CM9 has known bugs and AOKP either, so we will wait to have Broadcom drivers and we'll see! Until then wait ...
anasdcool71 said:
Even then i think AOSP won't be possible for SGY. Hardware Limitations.
Click to expand...
Click to collapse
I see a aosp or aokp rom on galaxy ace.. but the hardware of ace is almost same as y.
nothing is impossible,
before even users said "SGMini can't handle ICS" but on febuary (correct me if im wrong) 2012 they released a developed Stock ICS for mini,
nothing is impossible,
the question lies on how do we get there and what steps we need to follow,
I have worked on alot of phones like htc explorer,ace,mini and my beloved Y and I know that we can run AOSP easily!
I hope you guys know that cm is BASED ON AOSP!!
Even if we dont have sources to compile, we can port the aosp roms from other phones and make them work easily!
hell_lock said:
I have worked on alot of phones like htc explorer,ace,mini and my beloved Y and I know that we can run AOSP easily!
I hope you guys know that cm is BASED ON AOSP!!
Even if we dont have sources to compile, we can port the aosp roms from other phones and make them work easily!
Click to expand...
Click to collapse
we can do it now but we can't have a stable version yet though,
pretty soon we'll have the driver sources and kickstart on major developments
wow you guys give us a lot of hope xD the sad thing all i can do sit and watch for am a noob
nikufellow said:
wow you guys give us a lot of hope xD the sad thing all i can do sit and watch for am a noob
Click to expand...
Click to collapse
Everyone of devs were there once .. don't use noob word please.. read my 2nd post in guide to know y..
If you sit and watch.. you will be there only.. read guides.. learn.. and before you know it.. you will know a lot.. telling from experience mate.. I have read every thread I have subscribed and every posts of that threads.. I have 250+ threads subscribed.. so read to learn
You will be the one to develop aosp then!!
Sent from the MUST have app!

[Discussion Thread] About CM10.1 - CM10.2 for the Xperia Play!

Discussions for CM10.1 and CM10.2 for the Xperia Play. If something new is coming. All discussion goes here.
im really for your project.
i hope you fix everything
_____________
a little quastion about bbqlinux
does it have all we need for compiling kernel and cm10(or other cm's) ?
and which version should i download for core i7 ivy brige (64bit) ?
pedyvirus said:
a little quastion about bbqlinux
does it have all we need for compiling kernel and cm10(or other cm's) ?
and which version should i download for core i7 ivy brige (64bit) ?
Click to expand...
Click to collapse
I think you should stick with Ubuntu 13.04 or else Linux Mint 15
Because bbqlinux its hard to install some updates. Compiling gives alot of errors. I'm switching my OS on Ubuntu 13.04 by this friday
Hurreyyy
[email protected] very happy to hear from u about this great news.so many contributors and members felt shocked of removing ur previous post.but
TAHNKS TO U FROM ME AND FROM ALL OUR XPLAY MEMBERS.WE RESPECT U
So because of viper cmx do u need a new bootlogo from me?
Sent from my SXP [R800i]
CyberScopes said:
So because of viper cmx do u need a new bootlogo from me?
Sent from my SXP [R800i]
Click to expand...
Click to collapse
Later bro. Let me settle up some things first
Sent from my GT-I9100G using xda premium
So hashy are you continuing your old ROM and kernel or are you starting from scratch?
sent from my Sony Ericsson xperia play ™ (r800x) using Tapatalk 4
crazymonkey05 said:
So hashy are you continuing your old ROM and kernel or are you starting from scratch?
sent from my Sony Ericsson xperia play ™ (r800x) using Tapatalk 4
Click to expand...
Click to collapse
Yup. If can i will start from scratch
@Hashy what happened to your old Kernel and ROM that you would start from scratch ?? I mean any reason for that ?? y not continue dev. cuz that would be easier and faster isn't it.. did the old ROM boot ? did you boot into 4.3 yet I mean through any means ?
saqibkhan said:
@Hashy what happened to your old Kernel and ROM that you would start from scratch ?? I mean any reason for that ?? y not continue dev. cuz that would be easier and faster isn't it.. did the old ROM boot ? did you boot into 4.3 yet I mean through any means ?
Click to expand...
Click to collapse
Because i was using Some of Legacy Xperia commits for my kernel. And the dev don't allow anyone to copy his work
I will start my work by this friday and lets see how it goes.
Hashy said:
Because i was using Some of Legacy Xperia commits for my kernel. And the dev don't allow anyone to copy his work
I will start my work by this friday and lets see how it goes.
Click to expand...
Click to collapse
I think that you can not compete . You should create together---> it is better---> Have a good rom with kernel than 2 ragged rom with 2 kernel. But mike can work on rom and you can work on kernel This is just my opinion sorry for bad english!
Sent from my R800i using xda app-developers app
Hashy said:
Because i was using Some of Legacy Xperia commits for my kernel. And the dev don't allow anyone to copy his work
Click to expand...
Click to collapse
And that's the reason why we don't have 3.4 kernel and 4.3 ROM yet. It's because nobody wants to share work with others or work together on one kernel and one ROM. Anyway i wish you all luck.
hmmm.. unity is strength.. Xperia play is no more about Cosmic Dans Turbo Kernel.. or Lupus's Kernel.. or AOKP or CyanagenMod.. (I mean all this in a good way) we need a "ROM" 4.2/4.3 for Xperia Play and a "Kernel" for Xperia Play.. the brand, the dev, no matters no more.. and the way things are,, I really think dev's should team up to make one Good Rom.. and One Good Kernel.. cuz I don't think Xperia Play would last till Android 6.0 .. so just this device one good last push.. and see how things work out. Split work will only increase/duplicate work.. delay the ROM/Kernel and maybe the ROM would never get rid of bugs.
Guys I don't think teaming up is going to happen, the old thread got deleted so I can't show you any of the stuff that happened. But it got pretty nasty so lets not bring working together up and just focus on getting a stable 4.3 build for our Xperia Play's
^I'm_With_Stupid said:
Guys I don't think teaming up is going to happen, the old thread got deleted so I can't show you any of the stuff that happened. But it got pretty nasty so lets not bring working together up and just focus on getting a stable 4.3 build for our Xperia Play's
Click to expand...
Click to collapse
I agree...hashy I'm sorry I can't really assist you as my play is my daily driver so all my stuff is on it.....but I'm rooting for you!!!
sent from my Sony Ericsson xperia play ™ (r800x) using Tapatalk 4
What about we try CM10.1 first Maybe we can fix those bugs. I think CM10.2 wont be stable enough for our device yet we dont have any stable CM10.1. If you guys still need CM10.2. I'll try my best
Hashy said:
What about we try CM10.1 first Maybe we can fix those bugs. I think CM10.2 wont be stable enough for our device yet we dont have any stable CM10.1. If you guys still need CM10.2. I'll try my best
Click to expand...
Click to collapse
Actually yes that seems like a good idea, as 4.3 is only a minor update of 4.2 and people have had success on the play before building 4.2 (without wifi though). But my main concern is being ready for 4.4, which if it is as ram light as everyone says and runs just as fast as gingerbread as everyone is saying, would be perfect for our Xperia Play's. But beggars can't be choosers as I always say
Hashy said:
What about we try CM10.1 first Maybe we can fix those bugs. I think CM10.2 wont be stable enough for our device yet we dont have any stable CM10.1. If you guys still need CM10.2. I'll try my best
Click to expand...
Click to collapse
Gee sounds like something I posted before on y don't we get cm10.1 stable on our before we jump 4.3 it made no sense to me but hey what ever works I guess
Sent from my R800x using xda premium
Hashy said:
Because i was using Some of Legacy Xperia commits for my kernel. And the dev don't allow anyone to copy his work
I will start my work by this friday and lets see how it goes.
Click to expand...
Click to collapse
Probably you haven't understand the problem: the problem wasn't you using some of the lxp's commits, the problem was you not asking permissions like everyone else; now probably mike want let you use his work as a base, but it isn't because he is selfish and didn't allow the other people to use his work, it is because you go against the common rule
Sent from my Nexus 7 using Tapatalk 4
^I'm_With_Stupid said:
Actually yes that seems like a good idea, as 4.3 is only a minor update of 4.2 and people have had success on the play before building 4.2 (without wifi though). But my main concern is being ready for 4.4, which if it is as ram light as everyone says and runs just as fast as gingerbread as everyone is saying, would be perfect for our Xperia Play's. But beggars can't be choosers as I always say
Click to expand...
Click to collapse
Let's see then
darkharbinger81 said:
Gee sounds like something I posted before on y don't we get cm10.1 stable on our before we jump 4.3 it made no sense to me but hey what ever works I guess
Sent from my R800x using xda premium
Click to expand...
Click to collapse
That what i was thinking just now. But nevermind.
[email protected] said:
Probably you haven't understand the problem: the problem wasn't you using some of the lxp's commits, the problem was you not asking permissions like everyone else; now probably mike want let you use his work as a base, but it isn't because he is selfish and didn't allow the other people to use his work, it is because you go against the common rule
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Against rule? Bro, Let it be now. I'll work on my way. I don't need any-one permission from now on

[TEST IT]Builiding ChaOS rom

hello fellas i am trying to build ChaOS rom for dhd and if anyone of you here can test the rom if it boots up and give me logcat that would be very helpful
http://d-h.st/Hbm
cyb3r.pr3dat0r said:
hello fellas i am trying to build ChaOS rom for dhd and if anyone of you here can test the rom if it boots up and give me logcat that would be very helpful
http://d-h.st/Hbm
Click to expand...
Click to collapse
illl try to flash this..
Will try and flash this
Sent from my HTC Desire HD using xda premium
xdagee said:
Will try and flash this
Sent from my HTC Desire HD using xda premium
Click to expand...
Click to collapse
does not boot. stucked in the boot logo.
how to get a logcat?
No info on the rom, developer approached me with a pm message, doesn't work as other say, it's not in the proper place just in general not to mention the nickname of the "developer"
..I wouldn't test it, something smells fishy
evronetwork said:
No info on the rom, developer approached me with a pm message, doesn't work as other say, it's not in the proper place just in general not to mention the nickname of the "developer"
..I wouldn't test it, something smells fishy
Click to expand...
Click to collapse
Lol lol dont be afraid of me, if you searched about ChaOS then you would have known what i am talking about
http://www.chameleonos.org/
And what have i builded here and if you looked inside Zip you could have seen that its a ROM , and I pm'ed you because i saw you were testing Roms all over dhd section
Leozaors said:
does not boot. stucked in the boot logo.
how to get a logcat?
Click to expand...
Click to collapse
Check if adb working then try logcat using adb
Sent from my HTC M7 using Tapatalk
cyb3r.pr3dat0r said:
Lol lol dont be afraid of me, if you searched about ChaOS then you would have known what i am talking about
http://www.chameleonos.org/
And what have i builded here and if you looked inside Zip you could have seen that its a ROM , and I pm'ed you because i saw you were testing Roms all over dhd section
Check if adb working then try logcat using adb
Sent from my HTC M7 using Tapatalk
Click to expand...
Click to collapse
i will try this http://forum.xda-developers.com/showthread.php?t=2324411
Leozaors said:
i will try this http://forum.xda-developers.com/showthread.php?t=2324411
Click to expand...
Click to collapse
Lets make this rom alive for DHD
Sent from my HTC M7 using Tapatalk
Leozaors said:
i will try this http://forum.xda-developers.com/showthread.php?t=2324411
Click to expand...
Click to collapse
adb not working on chameleon logo..
recovey recongnizes this rom as mokee cedartics port
Hey guys took a look at the thread I love the community trying to make ChaOS a reality... The ROM show's up like that because the dev is probably using my ROM as a base... although my ROM isn't the best base for an unofficial port. Better use randomblame's it's cleaner . Now about the not booting up. I am guessing it is failing to intialize the framework due to a kernel issue. I can fix and make a ChaOS compatible kernel... I will try to do it by tomorrow. Dev please PM me to tell me what development procedures have gone on. Also ChaOS uses the MIUI theming engine so I am guessing some special libs and other stuff must be transplanted into the base. I can also take a look into it if the dev gives me the point of starting Hope you all have a good day
CedArctic said:
Hey guys took a look at the thread I love the community trying to make ChaOS a reality... The ROM show's up like that because the dev is probably using my ROM as a base... although my ROM isn't the best base for an unofficial port. Better use randomblame's it's cleaner . Now about the not booting up. I am guessing it is failing to intialize the framework due to a kernel issue. I can fix and make a ChaOS compatible kernel... I will try to do it by tomorrow. Dev please PM me to tell me what development procedures have gone on. Also ChaOS uses the MIUI theming engine so I am guessing some special libs and other stuff must be transplanted into the base. I can also take a look into it if the dev gives me the point of starting Hope you all have a good day
Click to expand...
Click to collapse
we love mokee , okay will rebase on rb's cm 10.1 and reupload , what mod does kernel needs for Chaos?
Sent from my HTC M7 using Tapatalk
I'd recommend firstly this topic to be moved to DHD Development, and secondly the first post is for introducing the rom
This seems a bit off as it is right now
..Just my advice
CedArctic said:
Hey guys took a look at the thread I love the community trying to make ChaOS a reality... The ROM show's up like that because the dev is probably using my ROM as a base... although my ROM isn't the best base for an unofficial port. Better use randomblame's it's cleaner . Now about the not booting up. I am guessing it is failing to intialize the framework due to a kernel issue. I can fix and make a ChaOS compatible kernel... I will try to do it by tomorrow. Dev please PM me to tell me what development procedures have gone on. Also ChaOS uses the MIUI theming engine so I am guessing some special libs and other stuff must be transplanted into the base. I can also take a look into it if the dev gives me the point of starting Hope you all have a good day
Click to expand...
Click to collapse
based on Random Blame's CM10.1
http://www.uploadzeal.com/sgcmw5te7snc
Leozaors said:
does not boot. stucked in the boot logo.
how to get a logcat?
Click to expand...
Click to collapse
see if this one is working
cyb3r.pr3dat0r said:
see if this one is working
Click to expand...
Click to collapse
Can't test at the moment. Where are you porting from btw so I can mod the kernel appropriatelly.
downloading now..
same error.
stucked on bootlogo..
CedArctic said:
Can't test at the moment. Where are you porting from btw so I can mod the kernel appropriatelly.
Click to expand...
Click to collapse
Htc ville
Sent from my HTC M7 using Tapatalk
Leozaors said:
downloading now..
Click to expand...
Click to collapse
And if it gets bootlooped please try logcat
Sent from my HTC M7 using Tapatalk
same error
Leozaors said:
same error
Click to expand...
Click to collapse
CedArctic said:
Can't test at the moment. Where are you porting from btw so I can mod the kernel appropriatelly.
Click to expand...
Click to collapse
So its framework causing problem can you build modded kerner? I m using cos-0.6 from One S(ville)

Categories

Resources