Related
I bought a Cingular 8125 from a seller on another forum and it arrived with a broken LCD. Also, the battery is dead and can't be charged. (Not to mention the missing stylus and lots of scratches on the case... all for a "like new" phone... but I digress.)
I was able to borrow a battery from a coworker with the same phone, and it does power on. The screen is all white with multicolored splotched around the cracks in the LCD. I was also able to hook it up via USB and browse it through Activesync, so I'm guessing the phone is running.
Is there any other way I can test that it's going to work before I invest in a new LCD/digitizer? Another coworker mentioned there might be an emulator I could run on my PC to control the device and place calls with it, does such a thing exist?
Finally, does anyone have experience with a particular ebay sell of LCDs that they could recommend? I've seen a bunch listed in the $50-$60 range, including shipping. Does anyone have any suggestions on a source for replacement LCDs other than ebay?
Thanks,
-Brett.
your not sol yet.
Well to answer your questions in order;
Yes there is something that will let you control and make calls useing your computer, its called SOTI Pocket Controller, look for it.
I bought a mda with a broken lcd on purpose cause after looking into it i found that replacing the lcd isn't so hard. i bought my lcd from ebay and my phone is running great ever since the repair. your going to need to get the service manual and a new lcd ofc, also a torx #5 (type of screw driver) and a #0 phillips head.
good luck with your phone
-capn
capncucci said:
Well to answer your questions in order;
Yes there is something that will let you control and make calls useing your computer, its called SOTI Pocket Controller, look for it.
I bought a mda with a broken lcd on purpose cause after looking into it i found that replacing the lcd isn't so hard. i bought my lcd from ebay and my phone is running great ever since the repair. your going to need to get the service manual and a new lcd ofc, also a torx #5 (type of screw driver) and a #0 phillips head.
good luck with your phone
-capn
Click to expand...
Click to collapse
I'll look for a copy of the SOTI Pocket Controller, that's exactly what I was looking for.
I've already downloaded the service manual, I've got the screwdriver, I can pick up a torx.... but what did you mean when you said "and a new lcd ofc"? Is that "a new lcd of course"?
Also, do you remember who you bought the LCD from since you seemed to have a good experience?
Thanks!
-Brett.
!
Glad I could help, yea I meant of course, sorry lol. im 1337.
i cant remeber but it was some random company that sold refurbished lcd's, just pick one that has a good rating and a decent price and hope for the best, sorry its all the advice i can give=/.
good luck!
-capn
Hi pal, try this software, this software allows you to control your phone from pc with mouse and many other things. It is called my mobiler and i use it very often.
1) Connect your phone through AS
2) Let my mobiler install cabinet on your phone
3) Run it an click on the system tray where is the symbol of the phone and cable and select open mobiler, this will show you your screen.
zzoinks said:
I bought a Cingular 8125 from a seller on another forum and it arrived with a broken LCD. Also, the battery is dead and can't be charged. (Not to mention the missing stylus and lots of scratches on the case... all for a "like new" phone... but I digress.)
I was able to borrow a battery from a coworker with the same phone, and it does power on. The screen is all white with multicolored splotched around the cracks in the LCD. I was also able to hook it up via USB and browse it through Activesync, so I'm guessing the phone is running.
Is there any other way I can test that it's going to work before I invest in a new LCD/digitizer? Another coworker mentioned there might be an emulator I could run on my PC to control the device and place calls with it, does such a thing exist?
Finally, does anyone have experience with a particular ebay sell of LCDs that they could recommend? I've seen a bunch listed in the $50-$60 range, including shipping. Does anyone have any suggestions on a source for replacement LCDs other than ebay?
Thanks,
-Brett.
Click to expand...
Click to collapse
Hey Brett, I've got some info you need to look into when buying a replacement lcd, there are two types that i know of, their distinct differences are the fact that one has a black flex cable, and the other has a gold one(One is the first generation lcd, and the other is the second generation). I made the mistake of not opening my 8125 after i bought it the same way you bought yours, with a broken screen... I bought an lcd with a gold ribbon cable(back when they were $90+) and it <i>worked</i> with my 8125 except the colors were mixed a.k.a. not as they should be. I bought another lcd(yes, another $90+ since the seller didn't offer a return policy) which <u>matched</u> the color of the old cracked lcd that came in my 8125(the ribbon/flex cable was black). And all was perfect!
So if you haven't yet, take your 8125 apart and make sure you know what lcd it has. Ebay listing for these lcds are pretty definitive on whether they use an lcd with a black or gold ribbon cable. Good luck!
Thanks for the tip! I was checking them out on ebay and I did notice that some sellers made it clear there was a difference.
I bought a T5 torx driver this weekend and managed to get the back of the phone off, exposing the main board.... but didn't get any further than that. I'll have to check the color of the ribbon before I order.
Do you remember if yours was a refub LCD or not? I've seen all but one seller (who was located in Hong Kong) are selling refub units. I'd prefer a new one, but I also don't want to wait 2 weeks to get something form Hong Kong. Any problems with a refurb?
Thanks,
-Brett.
I'd like to know myself the difference between a refurb unit and a new unit. Maybe they replace the digitizer of faulty lcds and then resell the "fixed" units, or maybe there is some other thing about the lcds that make them impossible to sell as new~
Btw my lcd (as it was claimed by the seller) was new. I got it in the mail from Hong Kong inside of bubble wrap and Hong Kong Newspaper post. I looked at the lcd and it sure <i>looked</i> brand new, new enough to immediately apply a screen protector before i installed it into my pda(so that the screen protector covers ALL of the screen and doesn't miss the corners or the sides, it's the best way to apply a screensaver if you ask me).
Bolik said:
Hi pal, try this software, this software allows you to control your phone from pc with mouse and many other things. It is called my mobiler and i use it very often.
1) Connect your phone through AS
2) Let my mobiler install cabinet on your phone
3) Run it an click on the system tray where is the symbol of the phone and cable and select open mobiler, this will show you your screen.
Click to expand...
Click to collapse
how do I align the screen with this program?
boi said:
how do I align the screen with this program?
Click to expand...
Click to collapse
Download and try this :-
zabardast_1 said:
Download and try this :-
Click to expand...
Click to collapse
Thank you very much!!!
I will try this as soon as I get home.
Boi
zabardast_1 said:
Download and try this :-
Click to expand...
Click to collapse
Thanks for the download
ewww...vista.
i dont even think microsoft really supports vista the way you would like for using your MDA. Best way to do anything to your phone (and what most of these roms seem to require) is Win XP.
For some reason microsoft wanted to change the way things were handled and I for one am not really happy with it.
Figured this might be the best place as ever. Before I part my Wizard and pay some large fee for a 8525.
Has anyone seen problems with the screen flickering and going mostly white/gray (with lines).
I had dropped my phone a few weeks back - I bought a replacement screen on Ebay and swapped it out - worked great for two weeks. All of a sudden, on Saturday night it went from working to just flickering. Could the new LCD's cable have gone bad? Anyone seen this?
KyleK29 said:
Figured this might be the best place as ever. Before I part my Wizard and pay some large fee for a 8525.
Has anyone seen problems with the screen flickering and going mostly white/gray (with lines).
I had dropped my phone a few weeks back - I bought a replacement screen on Ebay and swapped it out - worked great for two weeks. All of a sudden, on Saturday night it went from working to just flickering. Could the new LCD's cable have gone bad? Anyone seen this?
Click to expand...
Click to collapse
I had problems the first time I replaced my screen where I turned it on and it was completely white. Turns out I didn't have the connector properly seated. I took everything apart and made sure to fully seat the cable into the connector close the little clamp securely. After that it worked fine.
It might be worthwhile to take the phone apart again and make sure the ribbon cable connector hasn't come unseated.
Good luck!
-Brett.
zzoinks said:
I had problems the first time I replaced my screen where I turned it on and it was completely white. Turns out I didn't have the connector properly seated. I took everything apart and made sure to fully seat the cable into the connector close the little clamp securely. After that it worked fine.
It might be worthwhile to take the phone apart again and make sure the ribbon cable connector hasn't come unseated.
Good luck!
-Brett.
Click to expand...
Click to collapse
Yeah, I have the phone in pieces right now. I've tried blowing out the connector/etc. Going to try to clean it.
Btw, sorry about the thread hijack. I meant to post this in another thread for Wizard repairs, somehow got sidetracked and dropped it here.
zabardast_1 said:
Download and try this :-
Click to expand...
Click to collapse
Thank you for your help. I have now replaced the LCD from China but the expansion slot would not recognise any card. Did I do something wrong? Thanks in advance.
hello
my nexus 7's screen cracked after just 4 days of light use .. and now I have a triangular area in the top right of my screen that's not responding to the touch so that now I can't get to the right notification area unless rotate the screen or use a mouse . so I was thinking of replacing it.
since I live in Egypt and I had the tablet shipped to me from the US my only option is getting a screen shipped from ebay and installing it myself. so I was wondering what kind of screen should I get to get the whole touch screen working again.
i've been looking on ebay and was wondering if something like this might work?
http://item.mobileweb.ebay.com/view...1082526272&index=1&nav=SEARCH&nid=34354766081
I am not a very technical person so I am sure what the digitizer is.but I am guessing it's the part that broke to make the screen unresponsive.
so . should I get this one? if not what should I get?
I am looking for something cheap since the shipping cost is a lot.
thanks in advance
just upping the thread. I need the answer desperately
Sent from my Nexus 7 using Tapatalk 2
With screen + shipping + labour charge (to change screen).. Isn't it better if you get a new set and sell off the broken one on eBay? At least it's a new set and problem free.
a new replacement screen costs as much as a new Nexus 7. I cracked mine in January. The only way to use it is to connect a mouse which is pretty lame. Waiting for the newer Nexus 7.
since I live in Egypt. I can't really sell stuff on eBay. and my nexus 7 is the 3G version so I can't afford getting a new one.
I am really confused about the concept of a touch screen, a digitizer and an LCD. what is the differences between them and what do I really need?
if you can help me with eBay links I would much appreciate it.
thanks in advance
There is a guide here on how to change the screen (ok it seems I can't post the link because don't have enough posts. If you go to ifixit and search for nexus 7, there is a guide there)
The touchscreen part (digitizer) is the outer glass.
The LCD is bonded to the glass.
I've only ever seen the lcd and digitizer sold together. It is a lot easier to change them as one unit instead of trying to remove the broken digitizer from the lcd.
As people have said the price of the part outweighs the cost of fixing it, but if you really wanted to do it you should find all the information above.
Lim Wee Huat said:
With screen + shipping + labour charge (to change screen).. Isn't it better if you get a new set and sell off the broken one on eBay? At least it's a new set and problem free.
Click to expand...
Click to collapse
I agree a second hand one though would be a lot more economical
Sent From My Nexus 7 MIUI Warlord
And The Unbeatable [email protected] in Pool Break Pro
Hey everyone,
So I've gotten a smashed up Nexus 7 tablet from a friend, who said I get to keep it since she already got a Dell Venue 7 as a replacement tablet. I was looking up for a replacement screen and found out that the LCD panel is bonded to the glass using a super adhesive which meant that it's nearly impossible to remove without damaging the LCD unit itself. So I was looking for a replacement unit with an LCD display attached, what I found was that a majority of the display units are manufactured by CHUNGHWA which was not the original display manufacturer for this tablet. So my question is, since CHUNGHWA seems to be popular and cheaper than getting the original HYDIS panels:
How is the quality of these CHUNGHWA panels? Are the colours good and the viewing angles comparable with the HYDIS panels?
As long as they're comparable, I don't mind getting a CHUNGHWA replacement panel.
Please let me know if you guys have experiences with these panels as I haven't been able to find opinions on these panels on the Internet other than people are selling these panels as replacement panels.
Many thanks,
deltatux
This is not what you'd call rapid reply, but maybe someone still has this question.
I cracked my original N7 screen (Hydis) after couple weeks of usage. Bought Chunghwa replacement as it was the only available at the moment. And today it finally died after a year of agony. Basically, Chunghwa was much worse:
It was blinking. It seemed like from time to time (not always) it could not decide between two neighbour levels of auto brightness so started to switch between them like 5 times a sepond. Very annying.
Two white pixels occured in a month
It liked to touch itself, yeah. Sometimes it would start random touches until I switch the device off and back on.
Yesterday it started to report multiple touches along a vertical center line of display. Switching off/on didn't help any more. I disassembled the tablet hoping this is a bad contact and I can fix it just disconnecting/connecting the ribbons and after that digitizer died completely.
You better look for Hydis.
well I just got a replacement screen for mine... got the chumbawumba as well. hoping it works out for me. but hey, I only spent 20 for the smashed tablet and then 35 for the replacement screen/digitizer/bezel combo.
schollianmj said:
well I just got a replacement screen for mine... got the chumbawumba as well. hoping it works out for me. but hey, I only spent 20 for the smashed tablet and then 35 for the replacement screen/digitizer/bezel combo.
Click to expand...
Click to collapse
@schollianmj
What was your outcome?
At the moment I am debating on getting a chumbawumba one or buying a second hand screen (both touch and LCD have gone in mine)
cchaos said:
@schollianmj
What was your outcome?
At the moment I am debating on getting a chumbawumba one or buying a second hand screen (both touch and LCD have gone in mine)
Click to expand...
Click to collapse
Mine came out fine. been using it in my car a lot latley and no issues other than the screw issues. just be prepared for them to fight you and get a real screwdriver. I put screws in all 4 corners and I believe a couple down the sides. got maybe 2/3ds the screws in but you couldnt tell with the back cover snapped on.
Honestly I wasnt to worrried about getting the chumbawumba screen despite a few neg reviews because my tablet was bought for cheap with a smashed screen. I figured if it worked good then great for me. if it flaked out after a few months I would just get a new tablet.
schollianmj said:
Mine came out fine. been using it in my car a lot latley and no issues other than the screw issues. just be prepared for them to fight you and get a real screwdriver. I put screws in all 4 corners and I believe a couple down the sides. got maybe 2/3ds the screws in but you couldnt tell with the back cover snapped on.
Honestly I wasnt to worrried about getting the chumbawumba screen despite a few neg reviews because my tablet was bought for cheap with a smashed screen. I figured if it worked good then great for me. if it flaked out after a few months I would just get a new tablet.
Click to expand...
Click to collapse
@schollianmj
Thanks for replying. I brought mine cheap too. Hadn't thought about it in that way so might just take your thing and risk it.
Having said this, I have just found a "dead" nexus 7 on eBay that's cheap too....
The glass on my nexus 4 has cracked couple months ago after falling 1-2 feet from my table. Only recently I decided to replace it with the Display + Frame kit in order to avoid all the mess with the heat gun. Replacement was a piece of cake, very easy phone to work with. Sadly, there are bad news. The touch screen is ghosting and being erratic. I bought the replacement from ebay, linked below, and have messaged seller about replacement.
I tried to save couple bucks, but now I will have to ship it back for RMA and have to deal with down time. The unit does not look like a cheaply made clone, but the labeling is pretty much copy and paste with weird font, suggesting that the item might be clone. Now take a look at replacement from repairuniverse website. The touch screen controller has a version number on it, which is 1.1 The original screen on my N4 is version 1.0 (1238). If I am not mistaken, the new touch screen fixes the issue of random minor-ghosting which I did have form factory.
I will try the RMA replacement, but if that does not work, where can I buy the quality touch screen with frame? Is the one sold by repairuniverse as good as it gets?
http://www.ebay.com/itm/181205852580?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
http://www.repairsuniverse.com/lg-nexus-4-e960-lcd-touch-screen-digitizer-frame-replacement.html
My sister smashed up her phone a few months back (Nexus 4), and then a few weeks later my girlfriend did the same thing to her Nexus 5. I ordered both replacement screens from ETradeSupply (here's the N4 one: http://www.etradesupply.com/oem-lg-...nd-digitizer-assembly-with-front-housing.html) and while they are definitely pricey they have been working so far without issue.
I feel they are overpriced though and there might be a cheaper and just as reliable solution.
ggmask said:
My sister smashed up her phone a few months back (Nexus 4), and then a few weeks later my girlfriend did the same thing to her Nexus 5. I ordered both replacement screens from ETradeSupply (here's the N4 one: http://www.etradesupply.com/oem-lg-...nd-digitizer-assembly-with-front-housing.html) and while they are definitely pricey they have been working so far without issue.
I feel they are overpriced though and there might be a cheaper and just as reliable solution.
Click to expand...
Click to collapse
Would you say that those were original parts or counterfeit? Judging by the pictures, they look like original, but then on ebay the seller put up pictures of original replacement and sold counterfeit. The biggest giveaway is probably labels of ribbon cables.
P1X3 said:
Would you say that those were original parts or counterfeit? Judging by the pictures, they look like original, but then on ebay the seller put up pictures of original replacement and sold counterfeit. The biggest giveaway is probably labels of ribbon cables.
Click to expand...
Click to collapse
I am not sure, their site says OEM but I do remember there being some strange gold stickers on them that weren't on the busted screens. A few of the sticky tabs (like the one that sits under the camera, and the one under the micro USB port) also did not look the same. Everything else did though, like the radio cables etc., were all the same color. Honestly I don't know for sure.
You should go with spareslg.com. They are the only site I know that appears to sell brand new service packs. Bear in mind you should replace the battery as well, it is impossible for the average person to reuse the battery after a screen replacement.
DrFredPhD said:
You should go with spareslg.com. They are the only site I know that appears to sell brand new service packs. Bear in mind you should replace the battery as well, it is impossible for the average person to reuse the battery after a screen replacement.
Click to expand...
Click to collapse
I will keep spareslg.com in my although they are outside of my region.
Why would the battery need to be replaced? Because of possible damage when taking it out?
I found it easier to take everything out first, and battery last. It is easier to pry the battery on the side where antenna cable is taped.
You can try reuse it. I've seen cases where people have done that and then 2 weeks later it has swollen so much it cracks the back of the phone. LG would replace your battery if they fixed the screen.
Nothing is impossible with right tools and patience I have changed lcd and back glass few months ago and still using old battery without any problems ...
P1X3 said:
I will keep spareslg.com in my although they are outside of my region.
Why would the battery need to be replaced? Because of possible damage when taking it out?
I found it easier to take everything out first, and battery last. It is easier to pry the battery on the side where antenna cable is taped.
Click to expand...
Click to collapse
Did you get your N4 fixed? Where did you end up getting a screen? I just broke mine yesterday and need to buy a good replacement.
Thanks,
Tommy
Sent from my MacBook Pro using Chrome
Phone: Nexus 4 + Purity + HellsCore b46-t4
tnp9008 said:
Did you get your N4 fixed? Where did you end up getting a screen? I just broke mine yesterday and need to buy a good replacement.
Thanks,
Tommy
Sent from my MacBook Pro using Chrome
Phone: Nexus 4 + Purity + HellsCore b46-t4
Click to expand...
Click to collapse
Sadly, I have not fixed my N4 yet. All the sellers I contacted claimed that there is no sellers that seels OEM parts, only OEM compliant.
I just might part my nexus and buy something else.
P1X3 said:
Sadly, I have not fixed my N4 yet. All the sellers I contacted claimed that there is no sellers that seels OEM parts, only OEM compliant.
I just might part my nexus and buy something else.
Click to expand...
Click to collapse
Ok. I ordered a screen from eBay yesterday. I'll post on here how it goes.
Sent from my cousin's iPhone using Tapatalk while I fix my N4
replaced screen
bought one from ebay
http://www.ebay.ca/itm/OEM-LG-Googl...e_Replacement_Parts_Tools&hash=item2ec84d8e0f
working fine. for some reason the price for this changes lots i got it for 78 but it shows now for 73.00 plus ship and import, I have seen him list it for 300.00 don't know whats up with that. note proximity sensor is very finicky when changing screens. In my case turning the rubber seal around fixed it on 2 screens.
P1X3 said:
Sadly, I have not fixed my N4 yet. All the sellers I contacted claimed that there is no sellers that seels OEM parts, only OEM compliant.
I just might part my nexus and buy something else.
Click to expand...
Click to collapse
You can check the lg website for Portugal. They will link to spareslg.com for OFFICIAL parts. So there are some global websites that will sell you OEM spare part. They are in my region but for what I see they ship worldwide.
On ebay you get some good deals and others not so good
Enviado do meu LG-V500 através de Tapatalk
So here is another update. I have put away my broken N4 and used HTC Amaze 4G for quite a while. Recently Amaze began to have issues with touch screen until part of it stopped working all together.
Figured I would give ebay another try. Seller is wholesalegadgetfix, item number 151206512431. Item is listed as OEM, but when I asked the seller they weren't sure. Whatever, placed an ordered and received it today.
First of all, the unit looked OEM-ish. Synaptics MC was clearly labeled and its ribbon cable was stamped with few numbers and Rev 1.1 Display ribbon cable had markings with numbers that are similar to updated actual OEM item.
Overall, markings look OEM, but not necesarly in right place. Frame itself is OEM. Tried to test the unit before assembly but it was almost impossible, therefore, I proceeded with the install.
Right off the bad, no issues with touchscreen like previous ebay unit had, at least not yet *fingers crossed*. Display quality looks good, although I don't remember what original looked like.
One bad thing about it. There is slight light-bleeding at the bottom left where back button is. It's not terrible, but I imagine it won't be a big issues with translucent bar. After-all, this is my best phone option as of now.
Sorry for bumping an old thread.
Dropped the phone, boohoo, glass shattered. lcd works fine and so do all touch areas. But the home button and back button do not work along the bottom. My overview/panels button still works.
So what do I need to replace? Will a simple glass replacement/Digitizer on eBay for about $10 restore function to the home and back button?
(as a side note - I think I can root the device + install permanent on screen action buttons right? The free stuff from Google play isn't cutting it)
happened to me a few months ago, I bought full lcd + digitizer from alliexpress. I believe it woul be very hard to separte the display from the screen/digitizer
Good to know they're available. I somehow got a tiny corner chip on mine (no idea how). Thankfully it's small and low enough that it doesn't affect buttons or screen.
Would this basically be it?:
Seems pretty simple as long as I can get my hand on a heating gun.
there is an error on the video
TheDethEgineer said:
there is an error on the video
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=MRr3x3xuMxc&t=231s
Well, I watched it again, and it does look like the lcd was replaced as well. Doh!
As far as the relacement - does this seem about right? - https://www.aliexpress.com/item/100-new-LCD-screen-display-Touch-digitizer-For-Letv-LeEco-Le-Pro-3-X720-gold-color/32756701256.html?spm=2114.01020208.3.187.B9SO3H&ws_ab_test=searchweb0_0,searchweb201602_5_10065_10130_10068_10136_10137_10138_10060_10062_10141_10056_10055_10054_10059_10099_129_10103_10102_10096_10148_10147_10052_10053_10050_10107_10142_10051_10143_10084_10083_10080_10082_10081_10110_10111_10112_10113_10114_10078_10079_10073_10070_10123_10124-10102,searchweb201603_6,afswitch_1,ppcSwitch_2_ppcChannel&btsid=93cb0b62-e89a-46e2-9448-1f84f8956bad&algo_expid=e9efba97-fe51-4502-b6de-1af06e738566-0&algo_pvid=e9efba97-fe51-4502-b6de-1af06e738566
stevedawg85 said:
https://www.youtube.com/watch?v=MRr3x3xuMxc&t=231s
Well, I watched it again, and it does look like the lcd was replaced as well. Doh!
As far as the relacement - does this seem about right? - https://www.aliexpress.com/item/100-new-LCD-screen-display-Touch-digitizer-For-Letv-LeEco-Le-Pro-3-X720-gold-color/32756701256.html?spm=2114.01020208.3.187.B9SO3H&ws_ab_test=searchweb0_0,searchweb201602_5_10065_10130_10068_10136_10137_10138_10060_10062_10141_10056_10055_10054_10059_10099_129_10103_10102_10096_10148_10147_10052_10053_10050_10107_10142_10051_10143_10084_10083_10080_10082_10081_10110_10111_10112_10113_10114_10078_10079_10073_10070_10123_10124-10102,searchweb201603_6,afswitch_1,ppcSwitch_2_ppcChannel&btsid=93cb0b62-e89a-46e2-9448-1f84f8956bad&algo_expid=e9efba97-fe51-4502-b6de-1af06e738566-0&algo_pvid=e9efba97-fe51-4502-b6de-1af06e738566
Click to expand...
Click to collapse
Yeah that is the one you need
That same seller sent me a message after I paid for the screen, he told me that there was low stock and it will take them about 6 days to restock, I decided to cancel the order and buy it from another seller but it was the same story, there was no stock and it took them around a week to send the screen.
I placed the order on Jan 03, the screen was shipped on Jan 09, and it was delivered on Jan 16.
My phone on stock rom has an issue where the left edge does not work. LeEco said it was a known issue. I literally cannot seek a YouTube video to time 0:00 because it stops responding at about 0:14.
Do you have any issue with YouTube seeking to the beginning with the new screen?
dweekie said:
My phone on stock rom has an issue where the left edge does not work. LeEco said it was a known issue. I literally cannot seek a YouTube video to time 0:00 because it stops responding at about 0:14.
Do you have any issue with YouTube seeking to the beginning with the new screen?
Click to expand...
Click to collapse
Remove any screen protector
TheDethEgineer said:
Remove any screen protector
Click to expand...
Click to collapse
That has no effect for me.
If it is a hardware issue, I would ask LeEco to exchange it or I'll just replace the screen myself. LeEco tells me it is a known issue that I have. Now I am questioning if others have the same issue as me.
Can I assume nobody else has an issue with the screen/digitizer on the left edge, such as when seeking YouTube videos to the beginning?
replacement experience
Hi all,
For those who have change the display for the x720/x727, Have you found any significant difference from the original display? I need to change mine, and I have seen one on aliexpress. Sorry but I can't post the link because of the 10 post limitation.
It has many reviews, being almost all of them positive. But someone tells that there is no light on the capacitive buttons. I'd want to know if you have experienced this issue. Also, in your opinion, has the replacement the same brightness like the original one? Is as responsive as the original one?
Many thanks.
Kovayashy_Maru said:
Hi all,
For those who have change the display for the x720/x727, Have you found any significant difference from the original display? I need to change mine, and I have seen one on aliexpress. Sorry but I can't post the link because of the 10 post limitation.
It has many reviews, being almost all of them positive. But someone tells that there is no light on the capacitive buttons. I'd want to know if you have experienced this issue. Also, in your opinion, has the replacement the same brightness like the original one? Is as responsive as the original one?
Many thanks.
Click to expand...
Click to collapse
For me the replacement one looks a bit better than the original. Everything works fine.
TheDethEgineer said:
happened to me a few months ago, I bought full lcd + digitizer from alliexpress. I believe it woul be very hard to separte the display from the screen/digitizer
Click to expand...
Click to collapse
Can you give me the link of that seller?
Thanks
RedWine71 said:
Can you give me the link of that seller?
Thanks
Click to expand...
Click to collapse
It seems that the item is no longer available but you can search for "X720 lcd screen" and you can find many options Good luck :good:
Hi, i broke my digitizer on pro 3 Gold. Can i buy only digitizer or i must buy lcd+digitizer?