Database Users

help needed with odin to flash the stock rom

can someone show which files to use with odin to flash this rom pls?
http://forum.xda-developers.com/showthread.php?t=1310513
just give me the file names which should be with odin options
pit:
bootloader:
pda:
phone:
csc:
I'm totaly lost i can't figure out the right file for each option

Look at s2 forum thread at how to guide.
http://forum.xda-developers.com/showthread.php?t=1125282

these are the files that come with this rom
-CODE_N7000XXKJ1_CL627135_REV02_user_low_ship.tar.m d5
-GT-N7000-MULTI-CSC-OXAKJ1.tar.md5
-KERNEL_N7000XXKJ1_CL627135_REV02_eng_mid_ship.tar. md5
-MODEM_N7000XXKJ1_REV_05_CL1067428.tar.md5
-Q1_20110914_16GB.pit
I'm tring to flash back to the stock rom because I'm stuck at samsung logo after I tried to flash netchip new rom

any success ?
same problems here.

guys i need this file Q1_20110914_16GB.pit

haam1978 said:
...because I'm stuck at samsung logo after I tried to flash netchip new rom
Click to expand...
Click to collapse
No access to the recovery? Provided the flash was successful, wiping cache should usually do, thats my experience anyway. If the flash was crap, simply reflash the rom. If the downloadbwas crap, redownloadban push the file ontobthe phone again via usb mode or adb.
Flashing stock would be my last approach, but thats just me and my 2¢...
Sent from my GT-N7000

[Q] s5360 S5360DDMD1_S5360ODDMD1_INU.zip

Hi brother ..I just download firmware ..S5360DDMD1_S5360ODDMD1_INU.zip .. http :// samsung-updates. com/ device/?id=GT-S5360 (India)
But inside the file not include pit file boot loader csc etc ...
I just just fund 2 file 1 is S5360DDMD1_S5360ODDMD1_S5360DDMD1_HOME.tar.md5
2nd file SS_DL.dll
so my question how I update firmware through odin ...
caused don't have .. pit file boot loader csc etc ..
Need ur help/
ty .

never flash the boot loader or pit file through odin unless it is actually needed (most the time it isnt) - if you do it wrong your phone will be dead
all you need is phone modem and csc
firmware from sammobile must be split into phone modem and csc in order to flash it via odin as galaxy y doesnt support single file flashing
you have two choice
1 - goto my firmware thread as iv already done ddmd1
http://forum.xda-developers.com/showthread.php?t=2568853
2- split firmware yourself using my guide
http://forum.xda-developers.com/showthread.php?p=49543982

with odin 3.07 its no problem to flash single ones

marcussmith2626 said:
never flash the boot loader or pit file through odin unless it is actually needed (most the time it isnt) - if you do it wrong your phone will be dead
all you need is phone modem and csc
firmware from sammobile must be split into phone modem and csc in order to flash it via odin as galaxy y doesnt support single file flashing
you have two choice
1 - goto my firmware thread as iv already done ddmd1
http://forum.xda-developers.com/showthread.php?t=2568853
2- split firmware yourself using my guide
http://forum.xda-developers.com/showthread.php?p=49543982
Click to expand...
Click to collapse
thx my problem solved ..

Help me please! I think I have made a mess!!!

Hello to everybody, guys I have a problem!
I bought a samsung galaxy tab 4 SM-T530 with rom 4.4.2 (i live in EUROPE) and I used it with two different google profiles.
I don't know why but despite the amount of ram and the 4 core cpu, the tablet become useless, event the web surfing is a pain!!!
So I've decided to enter into the modding world and take away all that services that I don't need, installing a rom already cooked and I choose this:
[TW][5.02][SM-T53X]T530 ,T530NU LP deodex 4pda teamwork
First of all I have saved my personal data and started in this order:
1) Downloaded ODIN
2) Downloaded CF-Auto-Root from https://autoroot.chainfire.eu/
I putted the device in download mode and after that I found the superSU app in the tablet
So i downloaded the AD Setup 1.4.2 to install the TWRP --> THE ONE MENTIONED IN THE ROM LINK ABOVE
But the command fastboot didn't recognize the device...
so i found a play store app: FLASHIFY
I putted the TWRP img files on the sd and I flashed the recovery.
After that I putted on the external SD the file .zip of the deodexed rom above but after flashing the tablet stuck on the SAMSUNG GALAXY TAB 4 screen and doing nothing.
So I decided to open odin, choose the original .md5 file 4.4.2 for my device using the AP option and started the transfer.
It succedeed and I went back to 4.4.2, but how can I install the rom above?
What can I do?
I did all the steps well?
Help Me please!!!!

You have to use Odin to install an official lollipop firmware before you can install any custom roms

thisisapoorusernamechoice said:
You have to use Odin to install an official lollipop firmware before you can install any custom roms
Click to expand...
Click to collapse
Thanks man... I apologize to have open a thread for such a stupid thing...
Thank you again..

Galaxy S7 soft bricked

I have a Galaxy S7 SM-G935FD International Edition which, thru a long sequence of missteps, I have gotten to the point where I can only get to the Samsung Logo Screen or the ODIN download mode (ie. no boot). I flashed TWRP 3.0.2-0-herolte, apparently successfully, by converting the zipped file I found to a .tar and using ODIN 3.10.7 on a Win10PC. But I am unable using any key sequence to get into any TWRP recovery mode - only the two modes above. I tried to convert the Superman rom on this forum to a tar also, but flashing stopped after Aroma at starting NAND write. In my many missteps, what I was trying to accomplish is to debloat and root the phone, at least to gain root access using Android adb. I was able to do this on my previous S6 Edge, but Samsung's vast security barriers have defeated me.
Steps to recover from this mess greatly appreciated ...... hopefully steps I can complete using ODIN ............ thx, Gus

gus_zernial said:
I have a Galaxy S7 SM-G935FD International Edition which, thru a long sequence of missteps, I have gotten to the point where I can only get to the Samsung Logo Screen or the ODIN download mode (ie. no boot). I flashed TWRP 3.0.2-0-herolte, apparently successfully, by converting the zipped file I found to a .tar and using ODIN 3.10.7 on a Win10PC. But I am unable using any key sequence to get into any TWRP recovery mode - only the two modes above. I tried to convert the Superman rom on this forum to a tar also, but flashing stopped after Aroma at starting NAND write. In my many missteps, what I was trying to accomplish is to debloat and root the phone, at least to gain root access using Android adb. I was able to do this on my previous S6 Edge, but Samsung's vast security barriers have defeated me.
Steps to recover from this mess greatly appreciated ...... hopefully steps I can complete using ODIN ............ thx, Gus
Click to expand...
Click to collapse
Flash Stock Rom via ODIN.

Joku1981 said:
Flash Stock Rom via ODIN.
Click to expand...
Click to collapse
I was unable to find a stock rom for the international. I found a zipped UK no carrier stock rom. Since ODIN doesn't flash zipped files, I unzipped and saved to a tar file using 7-Zip on Win10. Attempts to flash the tar file using ODIN crashed ODIN on the PC. I'm not sure what's wrong, as I used the same method to flash the zipped TWRP file, and finished with a "success"
I note that I have a message saying kernel is not seandroid enforcing. Somehow I think using ODIN to flash a stock rom is being blocked by some Samsung secutity feature I cannot identify and haven't overcome. Gus

Check this thread http://forum.xda-developers.com/showthread.php?t=3335065 I don't know if you have experience with Odin process. Google it preferably look at YouTube video, if you feel shaky on Odin concepts.
Sent from my SM-G935F using Tapatalk

gus_zernial said:
I was unable to find a stock rom for the international. I found a zipped UK no carrier stock rom. Since ODIN doesn't flash zipped files, I unzipped and saved to a tar file using 7-Zip on Win10. Attempts to flash the tar file using ODIN crashed ODIN on the PC. I'm not sure what's wrong, as I used the same method to flash the zipped TWRP file, and finished with a "success"
I note that I have a message saying kernel is not seandroid enforcing. Somehow I think using ODIN to flash a stock rom is being blocked by some Samsung secutity feature I cannot identify and haven't overcome. Gus
Click to expand...
Click to collapse
1. "I flashed TWRP 3.0.2-0-herolte, apparently successfully, by converting the zipped file I found to a .tar and using ODIN 3.10.7 on a Win10PC." Reflash this FILE via ODIN coz you flashed wrong one and boot in it. Go to next step if doesn't work.
2. Flash Stock ROM via ODIN. SM-G935FD use the same firmwares that SM-G935F.

Careful with ODIN. Make sure you are running on the latest version, as I myself has problems using it for the Galaxy S7 Edge on an offer version
Sent from my SM-G935F using Tapatalk

maybe my question will be weird lol...how can i sofbrick a s7 g930p to be exact and then i can just unbrick flashing the U firmware? thanks.

Galaxy S3 Neo GT-19300i

My S3 Neo(GT-19300i) interrupted while updating and then it shows connect through kies recovery with yellow exclamation mark.
Then I searched web and find out it can be solved by firmware update via Odin.
I downloaded indian firmware and updated then phone is completely dead.
These are the firmwares i tried :-
1. I9300IDDUBQE2_I9300IODDBPF1_I9300IXXUBOJ1_HOME.tar.md5
2. AP_I9300IDDUBQE2_CL11438539_QB13612042_REV04_user_low_ship_MULTI_CERT.tar.md5
BL_I9300IDDUBQE2_CL11438539_QB13612042_REV04_user_low_ship_MULTI_CERT.tar.md5
CP_I9300IXXUBOJ1_REV00_CL_2015890.tar.md5
CSC_ODD_I9300IODDBPF1_CL8507635_QB10148873_REV04_user_low_ship_MULTI_CERT.tar.md5
3. AP_I9300IDDUBOI1_CL5896057_QB6452774_REV04_user_low_ship_MULTI_CERT.tar.md5
BL_I9300IDDUBOI1_CL5896057_QB6452774_REV04_user_low_ship_MULTI_CERT.tar.md5
CP_I9300IXXUBOI1_REV00_CL_1909238.tar.md5
CSC_ODD_I9300IODDBOI1_CL5896057_QB6452776_REV04_eng_mid_noship_MULTI_CERT.tar.md5
i dont have links for these firmwares so i copy pasted the file names for understanding. All these 3 indian firmware flashing suceeded via Odin but phone is dead.
Again I searched XDA and find out it's problem with indian firmware and it can be solved by debrick image in sd card to get download mode (and it's working I checked).
Link for debrick-https://forum.xda-developers.com/galaxy-s3-neo/general/how-to-unbrick-t2911301
Now the problem is I don't know which firmware was in my phone before and which firmware should I download to make it work. Should I download any other region firmware and use . Anybody help me to find correct firmware for my phone.