Related
is it supposed to be fast when it starts the animated portion, or sluggish. Mines is like choppy at isnt it suppose to be smooth to show off the processor speed?
Also how do i get the landscape view on my phone, i seen some screen shots, and it was landscape, but i turn my phone and nothing.
Also i noticed this just right now, i used the bar code scanner to scan some ****, and i heard a weird noise come from the phone. Like a rattle or something loose, but i shake the phone and nothing. Is that the camera just working?
na_rsx said:
Also i noticed this just right now, i used the bar code scanner to scan some ****, and i heard a weird noise come from the phone. Like a rattle or something loose, but i shake the phone and nothing. Is that the camera just working?
Click to expand...
Click to collapse
The rattle noise is the autofocus of the camera. IT IS NORMAL when you are using a camera application.
The start up animation is pretty choppy (it was fast on first boot) its pretty normal because the CPU is working to load the Android OS. As for landscape, it doesnt rotate on the home screen. It should however rotate everywhere else, but only if you turn it to the left (volume buttons facing downwards). If that doesnt work you have a problem. Try restarting the phone if that doesnt work you probably should call HTC.
My start up logo is choppy at first then it gets smooth.
Make sure also you have auto-rotate turned on in Settings>Sound and Display>Orientation
Sometimes, and I notice it mostly after unlocking it, the screen orientation is off (I'll be holding it "in portrait", but the screen is in landscape mode). Instead of switching immediately to portrait, or even after a couple seconds, I have to hold it in landscape then back to portrait for it to switch.
I only started noticing it after installing 2.2 last week, and it doesn't happen all the time. Has anyone else seen this behavior? I haven't calibrated the compass since 2.2, and after 2 minutes of rotating the phone around on 2.1, on at least two different occasions, I said screw it and stopped (before the calibration finished). Could that by why?
Also, maybe it's the launcher (ADW), but sometimes click-holding a widget/app shortcut on one of the screens is "wonky". Sometime I can click-hold it and the phone will vibrate and I can drag it to the trash or move it around no problem. But then sometimes it just won't activate. I just tried to delete a widget around 20 times. I click-held for anywhere from 1-3 seconds, and no vibrate. However, after I let go, it activated the program. WTF? Eventually it worked, but it really shouldn't take that many attempts.
Same issue. I have LP+. I disabled auto-rotation in settings\display as a temporary fix.
Sent from my DROIDX using Tapatalk
I have the same issue after unlock too. I've noticed that I have to hold it in portrait for a few seconds and tap the top to get it rotated. Quite annoying since it happens all day long. You're right, this didn't happen before froyo.
Anyone have skills with re-mapping buttons? I would love a dedicated button to rotate screen. I wouldn't mind the camera button remapped for that. Full Press=Rotates screen/Half Press=Locks screen in that rotation.
thats odd im on rooted 2.2 and dont have that problem with adw installed on it. it could be the accelerometer. i notice it other times not after unlock. usually i do have to wait a second and tapping it does help which leads me to belive its the accelerometer. however if this is a really big issue for alot of people then a button to auto rotate the screen would be very helpful.
Did anyone try calibrating their compass after moving to 2.2 and see if that fixes the screen orientation issues?
Sapo, I have. After doing that it wasn't happening for a little while (maybe a day or so), but it's back now for the last week, and it's happening more often. And I tried what someone else suggested, tapping on the top of my phone with a finger, and that flips it around to normal every time.
happens a lot with mine too, unrooted, still running moto blur...several apps open that way, email, messaging....not always though, so it's a bit puzzling.
I would try using the Stock Blur Home to see if its just ADW
see the post above yours
Ubermicro13 said:
I would try using the Stock Blur Home to see if its just ADW
Click to expand...
Click to collapse
see the post above yours
As everyone know WP7 has a feature which rotate screen as phone is rotated. In my phone it always work, almost 90% of time it is in "vertical" mode, when I rotate phone it switches to "horizontal", but I have seen issues few times:
1. when phone lays steady on flat surface (like table), when I unlock phone it is sometime switched to "horizontal", even when it was in "vertical" when I had put it on table,
2. when I am talking to sb with this phone, and phone is hold vertical, when I want to end call, the "end call" button is vertical, but options below changed to horizontal.
Of course every time phone switches back to vertical mode after 3-5s but it looks strange and annoying.
Has anyone else this problem?
I have check sensor calibration in MFG menu and it looks ok, at every flat surface I got reading 0 at both axis with small random noise (below 1).
Elektryk I've got the same problem but I don't care about it
same problem here... really annoying :S
I'm not sure if I'm describing this correctly in the title so let me try and elaborate -
I've used probably 10-15 different ROMs for my Nexus 10 and lately every single one I try, I have the same issue when I have the screen titled down horizontally towards me while reading in bed ( think holding it up while lying on my back, angled down at me so I can read ), where the screen blacks out/goes to sleep.
Then I have to tilt it back so it's vertical again and sometimes it puts me at the lock screen but more often I have to hit the power button to get the lock screen back, infuriatingly I then sometimes get stuck in a loop of hitting power to get to lock screen as it's going back to lock screen so then it kills the display again so then I have to hit power again etc etc. Once the screen is back and displaying everything is fine until some random amount of time ( between 5 seconds & 5 minutes ) when the screen just goes black again - presumably when I move/adjust my position or the angle of the screen.
Anyway - I believe this is version independent, I don't think it's the ROMs, it's like it's something built-in to the OS.
The only thing I can figure is it's either related to the accelerometer detecting that I'm tilting the tablet horizontally so the screen is facing down and thus it is killing the display, OR it's the light sensor detecting a darkening of the light since I would be angling the screen away from a direct light source and so it kills the screen thinking I'm placing it face down on a table.
Possibly related - I've also noticed since 4.2.2 ( maybe coincidence ) that I can't rotate my screen 180 degrees and be able to unlock the device. No matter what, if I flip that sucker around it instantly kills the display and locks the screen. I've got auto-rotate on, so I know that's not the issue, and if I hit the power button to get the lock screen up, then unlock it INSTANTLY locks again and kills the screen. It's like there's a setting now that says I CAN rotate if I want to but there's no point because I can't actually unlock the screen to do anything. Keep in mind this ONLY happens when flipping it 180 - if it do it 90 or 270 and have it vertical there is no issue, it is literally only when it is flipped 180 that this occurs.
Am I over thinking this or is there something really, really obvious I'm missing? I've gone over every setting I can think of and the only thing remotely screen related is the sleep timer but it doesn't matter how long I make it or if I even turn it off entirely - every time I get into bed to read I have to mash the power button to get the screen going again. It's minor in the grand scheme of things but it is incredibly frustrating when all I want to do is read before going to sleep, just stay open damn it !
I hate to shameless bump this but does anyone know what I'm talking about? If I tilt my N10 past a certain degree ( I want to say it's around 30 degrees or so ) the screen just goes to sleep, how do I stop this? I've used a ton of different ROMs so it seems to be something consistent and/or a fundamental "feature" of JellyBean and/or Android in general.
Astriaal said:
I hate to shameless bump this but does anyone know what I'm talking about? If I tilt my N10 past a certain degree ( I want to say it's around 30 degrees or so ) the screen just goes to sleep, how do I stop this? I've used a ton of different ROMs so it seems to be something consistent and/or a fundamental "feature" of JellyBean and/or Android in general.
Click to expand...
Click to collapse
If nothing else, I would say it rather "seems" to be a hardware issue, because I've never seen this behavior on my own device. That said, I can't say I've heard of many people talking about this either.
Rirere said:
If nothing else, I would say it rather "seems" to be a hardware issue, because I've never seen this behavior on my own device. That said, I can't say I've heard of many people talking about this either.
Click to expand...
Click to collapse
Thanks for replying! Good point - I've just assumed it wasn't something specific to MY N10 because I can't imagine why it would happen from a hardware perspective since it's never been damaged ( dropped, scuffed ) in any way. Unless I just got a bad egg with a faulty accelerometer or light sensor or something, which is also possible.
I suppose if no one else is experiencing this and it's isolated to me and is ROM independent than it must be hardware. Either that or when I'm laying in bed I generate large bursts of electromagnetic activity that cause it to think I've closed the "smart" cover. :cyclops:
Screen Timeout
I don't know if any of this matters, but I am just curious.
What is your Screen Timeout setting? Have you tried increasing this? Do you have it set to lock screen upon pressing the power button? Have you tried changing it? Do you use a pattern lock, pin code, other?
SmokinCharger said:
I don't know if any of this matters, but I am just curious.
What is your Screen Timeout setting? Have you tried increasing this? Do you have it set to lock screen upon pressing the power button? Have you tried changing it? Do you use a pattern lock, pin code, other?
Click to expand...
Click to collapse
My screen timeout is set to 10 minutes, though it doesn't seem to matter what I set it to - I just set it to 30 and the same thing happens after a second of tilting it.
I have screen lock via slide, but while I do lock/kill the screen via pressing the power button I just realized I've never actually set it to do this. I guess I thought it was a built-in feature - I've just gone through all the settings I have ( currently using FlamingMonkey AOSP ROM for reference ) and I don't see any option anywhere to enable/disable this feature. :S
Maybe there is an issue with my power button and when I tilt the tablet it jiggles it enough that it "presses" down and locks?
Use ultimate rotation control from store and force the lockscreen to landscape at all times.
Astriaal said:
My screen timeout is set to 10 minutes, though it doesn't seem to matter what I set it to - I just set it to 30 and the same thing ould be there for your ROM too. happens after a second of tilting it.
I have screen lock via slide, but while I do lock/kill the screen via pressing the power button I just realized I've never actually set it to do this. I guess I thought it was a built-in feature - I've just gone through all the settings I have ( currently using FlamingMonkey AOSP ROM for reference ) and I don't see any option anywhere to enable/disable this feature. :S
Maybe there is an issue with my power button and when I tilt the tablet it jiggles it enough that it "presses" down and locks?
Click to expand...
Click to collapse
I think that you are on the right track. The option to lock the screen on hitting the power button is under the Security settings for stock android. It should be there for your ROM too.
I constantly hit my power button when sitting it down or picking it up. That is why I disable the instant lock option.
Hello all!
My Razer Phone 2 stopped charging. This is how my Razer Phone 1 also died, basically the charging port went bad, then worse, then died completely.
Anyway I got the Nothing instead, since price and specs fit me pretty fine.
However I want to change a few things. I might be blind in the settings menu, but I'm hoping you'll still help me!
I got a few points I'd like changed, and no amount of googling helped me here:
1. The phone turns on the screen when I pick it up. But there are often mistakes, and the screen just turns on by itself when I'm walking with it in my hand, or in my pocket. It has happened already a few times, after having for phone for 48 hours, that I have dismissed some notifications because of this. Can I stop this function all together?
2. I can also press the screen once and the screen will turn on. This is also a problem when the phone is in my pocket. On my Razer I had to double tap and it still turned on sometimes in my pocket. I ran the Razer phone with Nova Launcher, maybe I have to change to this launcher from the Nothing one to get this double tap feature?
3. I can turn off the screen by double tapping on the home screen. That is a feature I always use and appreciate. I never put the phone screen down so the lights on the backside won't get used. I always double tap to turn on the screen, check for notifications, and double tap to turn the screen off should there be no notifications. Nothing phone won't turn off the screen with a double tap unless I actually unlock it, so I can't do a quick check for notifications by double tapping and double tapping again. It won't matter if the phone is on a table, but I frequently check notifications and put the phone back to my pocket, and having to go for the screen button is not exactly for me. Do I need Nova Launcher here?
4. I NEVER use sounds on my phone, except for the alarms. When someone calls me while the screen is turned off, the screen turns off and I get vibration. If the screen is on I won't get any vibration from it, only a visual notification which is easy to overlook if I let it sit with the screen on but locked if I just checked notifications. Also I like the feedback in my hands in case I am doing something on the phone. I already missed some calls because of this. Can it be changed?
5. Is it possible to manipulate the glyph on the backside? I found a "secret" setting which makes them light up to the music playing, but that became pretty annoying just after 5 seconds. Are there some basic things you can do with the light? Like making a custom event and then specify how the light should react? Could be something simple like when a call is active the lights come on very dim? Maybe a 3rd party app someone did?
6. The Razer Phone 2 (and 1) has HUGE speakers in the top and bottom, so I have been living with pretty big bezels. The Nothing has the same size but the phone is almost 100% screen. If I need to go to the bottom and press a back button or something, I cannot reach anymore like on the Razer. Is there a way to add some virtual bezels on Android?
7. I really hate this "notch" or "camera bump". It is a bit of the same as number 6, but can I remove it completely, so the top of the screen where the camera is won't be used at all? The whole line, effectively adding more bezel here too.
I am probably picky, but I have used my phone in a specific way for my whole life, and I am not really good with changes. Also I think a phone should adapt to my needs, and I shouldn't adapt to it.
Thanks for reading and hopefully helping
To be honest, sounds like the Nothing Phone isn't the right device for you.
I like to know the answer to question 1 too.
Jelle99 said:
Hello all!
My Razer Phone 2 stopped charging. This is how my Razer Phone 1 also died, basically the charging port went bad, then worse, then died completely.
Anyway I got the Nothing instead, since price and specs fit me pretty fine.
However I want to change a few things. I might be blind in the settings menu, but I'm hoping you'll still help me!
I got a few points I'd like changed, and no amount of googling helped me here:
1. The phone turns on the screen when I pick it up. But there are often mistakes, and the screen just turns on by itself when I'm walking with it in my hand, or in my pocket. It has happened already a few times, after having for phone for 48 hours, that I have dismissed some notifications because of this. Can I stop this function all together?
2. I can also press the screen once and the screen will turn on. This is also a problem when the phone is in my pocket. On my Razer I had to double tap and it still turned on sometimes in my pocket. I ran the Razer phone with Nova Launcher, maybe I have to change to this launcher from the Nothing one to get this double tap feature?
3. I can turn off the screen by double tapping on the home screen. That is a feature I always use and appreciate. I never put the phone screen down so the lights on the backside won't get used. I always double tap to turn on the screen, check for notifications, and double tap to turn the screen off should there be no notifications. Nothing phone won't turn off the screen with a double tap unless I actually unlock it, so I can't do a quick check for notifications by double tapping and double tapping again. It won't matter if the phone is on a table, but I frequently check notifications and put the phone back to my pocket, and having to go for the screen button is not exactly for me. Do I need Nova Launcher here?
4. I NEVER use sounds on my phone, except for the alarms. When someone calls me while the screen is turned off, the screen turns off and I get vibration. If the screen is on I won't get any vibration from it, only a visual notification which is easy to overlook if I let it sit with the screen on but locked if I just checked notifications. Also I like the feedback in my hands in case I am doing something on the phone. I already missed some calls because of this. Can it be changed?
5. Is it possible to manipulate the glyph on the backside? I found a "secret" setting which makes them light up to the music playing, but that became pretty annoying just after 5 seconds. Are there some basic things you can do with the light? Like making a custom event and then specify how the light should react? Could be something simple like when a call is active the lights come on very dim? Maybe a 3rd party app someone did?
6. The Razer Phone 2 (and 1) has HUGE speakers in the top and bottom, so I have been living with pretty big bezels. The Nothing has the same size but the phone is almost 100% screen. If I need to go to the bottom and press a back button or something, I cannot reach anymore like on the Razer. Is there a way to add some virtual bezels on Android?
7. I really hate this "notch" or "camera bump". It is a bit of the same as number 6, but can I remove it completely, so the top of the screen where the camera is won't be used at all? The whole line, effectively adding more bezel here too.
I am probably picky, but I have used my phone in a specific way for my whole life, and I am not really good with changes. Also I think a phone should adapt to my needs, and I shouldn't adapt to it.
Thanks for reading and hopefully helping
Click to expand...
Click to collapse
1. There is an option to turn this feature off under Display->Lock Screen called Lift to show lock screen.
2. Don't know, but you should try using the Nova Launcher.
3. Don't know, but you should try using the Nova Launcher.
4. Very niche use case, you can try to search some root methods.
5. There is root app which can control the light you can try that.
6. and 7. There should be some root apps or magisk modules which allows to do that.
To 2: (I dont know if this works on NothingOS since im on Paranoid Android. But both are very near to stock, maybe it works for you or for others.) I disabled that tap to activate setting and am using fingerprint while screen is off. This can also act as a quick look for notifications, for that i tap where the fingerprint reader is really short so it fails to unlock. This way only the always on display shows up for 3-4 seconds.
Nova wont change anything lockscreen related.
To 5: If you have root, time and like playing around with commands and apps, you can try tasker. Since im on Paranoid Android and the glyphs arent really implemented yet, i made a task that fits my needs perfect.
To your other problems: i think too, the phone should adapt to the user. So i suggest you to wait, i guess there will come roms that are way more customizable.
And maybe a pixel would fit your needings better than this phone because there is a big custom rom scene around.