Hi,
I just wanted to install a new ROM but I ended without any Bootloader and System.
What I did:
- Wiped everything
- Forgot to copy the .zip files - so thats the point where everything went wrong
- Tried to upload it via adb push - failed when I wanted to install the zip
- Startet the flash-all.sh to install the factory image - went wrong -> no system.ing etc found
So what can I do now?
Its a Nexus Wifi (2012).
Thanks!
hd21337 said:
Hi,
I just wanted to install a new ROM but I ended without any Bootloader and System.
What I did:
Wiped everything
forgot to copy the .zip files - so thats the point where everything went wrong
tried to upload it via adb push - failed when I wanted to install the zip
startet the flash-all.sh to install the factory image - went wrong -> no system.ing etc found
So what can I do now?
Its a Nexus Wifi (2012).
Thanks!
Click to expand...
Click to collapse
Hi, hd21337...
What happens when you (from a fully shut down state) press VOL-DOWN, hold.. whilst holding, press POWER-ON?
What do you see when you plug the Nexus 7 into the wall charger? Do you see the WHITE-ON-BLACK battery charging animation?
Have you tried pressing, and holding for 30 seconds, the POWER ON button? (Your tablet could just be stuck in APX mode).
Rgrds,
Ged.
hd21337 said:
Hi,
I just wanted to install a new ROM but I ended without any Bootloader and System.
What I did:
Wiped everything
forgot to copy the .zip files - so thats the point where everything went wrong
tried to upload it via adb push - failed when I wanted to install the zip
startet the flash-all.sh to install the factory image - went wrong -> no system.ing etc found
So what can I do now?
Its a Nexus Wifi (2012).
Thanks!
Click to expand...
Click to collapse
Blessed are the backup makers, for they hath made Nandroids.
Exasperations, 3:16
I didn't know you could wipe out the bootloader. You should still be able to push recovery from PC via adb - fastboot. Then if pc recognizes the device transfer the zips from the pc.
Other than that, just don't know atp.
Someone more knowledgeable than I will need to chime in.
Sent from my Hyperdriven Dev Edition Vzw SCH-I545 with KT kernel using Tapatalk 4
GedBlake said:
Hi, hd21337...
What happens when you (from a fully shut down state) press VOL-DOWN, hold.. whilst holding, press POWER-ON?
What do you see when you plug the Nexus 7 into the wall charger? Do you see the WHITE-ON-BLACK battery charging animation?
Have you tried pressing, and holding for 30 seconds, the POWER ON button? (Your tablet could just be stuck in APX mode).
Rgrds,
Ged.
Click to expand...
Click to collapse
VOL-DOWN + Power On = Bootload appears but when I click on "Recovery mode" I see the Google logo with a notification in the top (Booting failed) in red. The same notification appears when I click on "Start".
I see the charging animation and holding the power button for 30 second didnt help.
wtherrell said:
Blessed are the backup makers, for they hath made Nandroids.
Exasperations, 3:16
I didn't know you could wipe out the bootloader. You should still be able to push recovery from PC via adb - fastboot. Then if pc recognizes the device transfer the zips from the pc.
Other than that, just don't know atp.
Someone more knowledgeable than I will need to chime in.
Sent from my Hyperdriven Dev Edition Vzw SCH-I545 with KT kernel using Tapatalk 4
Click to expand...
Click to collapse
Nah I think that i corrupted/deleted it with the factory image script from google!
And when I enter the bootloader, I dont see my device via "adb devices" :>
Downloads/nakasi-jwr66y » sudo ./flash-all.sh
Password:
...
(bootloader) Bootloader is already unlocked
OKAY [ 0.020s]
finished. total time: 0.020s
erasing 'boot'...
OKAY [ 0.577s]
finished. total time: 0.577s
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [ 1.026s]
finished. total time: 1.026s
erasing 'recovery'...
OKAY [ 0.852s]
finished. total time: 0.852s
******** Did you mean to fastboot format this partition?
erasing 'system'...
OKAY [ 0.488s]
finished. total time: 0.488s
******** Did you mean to fastboot format this partition?
erasing 'userdata'...
OKAY [ 6.493s]
finished. total time: 6.493s
sending 'bootloader' (2100 KB)...
OKAY [ 0.271s]
writing 'bootloader'...
FAILED (remote: (InvalidState))
finished. total time: 0.412s
rebooting into bootloader...
OKAY [ 0.019s]
finished. total time: 0.020s
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
archive does not contain 'system.sig'
--------------------------------------------
Bootloader Version...: 4.18
Baseband Version.....: N/A
Serial Number........: XXXXXXXXXXXXXXXX
--------------------------------------------
checking product...
OKAY [ 0.030s]
checking version-bootloader...
FAILED
Device version-bootloader is '4.18'.
Update requires '4.23'.
finished. total time: 0.139s
Click to expand...
Click to collapse
hd21337 said:
Nah I think that i corrupted/deleted it with the factory image script from google!
And when I enter the bootloader, I dont see my device via "adb devices" :>
Click to expand...
Click to collapse
Maybe not... the v4.23 bootloader from Jellybean 4.3 build JWR66Y is known to cause issues when fastboot flashing back to factory stock. For this reason, it is recommended you replace that version of the bootloader with the one from build JWR66V. It's still, ostensibly, the same bootloader, but seems to fastboot flash OK.
As build JWR66V is now no longer available on the Google Developers website, somebody has extracted and uploaded the old bootloader from build JWR66V here. (You might have to scroll down a little for the link).
Oh.... and ADB devices doesn't work when you're in the bootloader... it requires a fully booted Android OS to work.
The command I think you're looking for is fastboot devices
Rgrds,
Ged.
hd21337 said:
VOL-DOWN + Power On = Bootload appears but when I click on "Recovery mode" I see the Google logo with a notification in the top (Booting failed) in red. The same notification appears when I click on "Start".
Click to expand...
Click to collapse
You are in bootloader (fastboot ) mode so when you wiped everything except bootloader it is normal state. Now check if computer know your nexus (if not install driver ) and run from factory image flash-all.bat and wait for restart. That's all. Adb and fastboot are two different things...
jkkk88 said:
You are in bootloader (fastboot ) mode so when you wiped everything except bootloader it is normal state. Now check if computer know your nexus (if not install driver ) and run from factory image flash-all.bat and wait for restart. That's all. Adb and fastboot are two different things...
Click to expand...
Click to collapse
Erm... yeah... I think the OP has probably done this already.
It was his fastboot output...
writing bootloader...
FAILED (remote: (InvalidState))
finished. total time: 0.412s
rebooting into bootloader...
...that suggested to me, the known issue with the bootloader from build JWR66Y as detailed here (in red letters, at the very top of the first post in the thread), and discussed here... as being the likely cause of the problem.
So, to reiterate @hd21337... fastboot flash the bootloader from build JWR66V, instead of the one from build JWR66Y... and it just might get your Nexus 7 back up and running again.
Good luck.
Rgrds,
Ged.
GedBlake said:
Erm... yeah... I think the OP has probably done this already.
It was his fastboot output...
writing bootloader...
FAILED (remote: (InvalidState))
finished. total time: 0.412s
rebooting into bootloader...
...
So, to reiterate @hd21337... fastboot flash the bootloader from build JWR66V, instead of the one from build JWR66Y... and it just might get your Nexus 7 back up and running again.
Click to expand...
Click to collapse
My concern was that OP could not start (deleted ) recovery from bootloader menu. He should look into stickies. Nexus is still alive and should get new bootloader as you recommended from another build.
Hi guys (@GedBlake and @jkkk88),
sorry for the late answer.
I just tried to run the flash-all.sh with the other bootloader image... but its worse than before.
(bootloader) Bootloader is already unlocked
OKAY [ 0.020s]
finished. total time: 0.020s
erasing 'boot'...
OKAY [ 0.580s]
finished. total time: 0.580s
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [ 0.769s]
finished. total time: 0.769s
erasing 'recovery'...
OKAY [ 0.854s]
finished. total time: 0.854s
******** Did you mean to fastboot format this partition?
erasing 'system'...
OKAY [ 0.489s]
finished. total time: 0.489s
******** Did you mean to fastboot format this partition?
erasing 'userdata'...
OKAY [ 6.494s]
finished. total time: 6.495s
sending 'bootloader' (2100 KB)...
OKAY [ 0.267s]
writing 'bootloader'...
OKAY [ 9.376s]
finished. total time: 9.643s
rebooting into bootloader...
OKAY [ 0.020s]
finished. total time: 0.020s
< waiting for device >
Click to expand...
Click to collapse
So and at this point, he stuck for about 20 minutes - I aborted it because he didnt move on. And now the N7 is dead. No power charging icon and animation and I cant turn it on (30 seconds holding power button etc.).
So I think I just killed it
Any ideas if there is an another reset trick etc.?
Thanks!
Related
Hi guys,
I need your help.
I rooted and unlocked my device using wug fresh toolkit 1.5.3.
After that I installed TWRP trough adb.
Next, I flashed Paranoid Android and everything was working fine.
By some stupid ideea that i had, because there was no space on my device
due to leftovers from the apps I had before, I tought I should go in TWRP and wipe everything,
than flash the Rom again.
I wiped cache, dalvik, restore factory settings and than I wiped sd card both internal and external.
Right now I cant flash the Rom again or restore a nandroid, because there is nothing on device.
Connecting to computer will not recognize it.
All I can do is, while conected to computer, use buttons and get into bootloader and from there on TWRP recovery.
Please help me with some instructions on how to make my Nexus 7 work again.
Thank you.
You can manually push ROM/Kernel/Gapps files to /sdcard using adb push from Android SDK.
I can't exactly recall if you can push the files from bootloader, or recovery, or both, but a push command would look like:
Code:
adb push FILE.zip /sdcard
adb push being the ADB command to push files from the computer to the device
FILE.zip being the name of the file you want to send to the device (for example, EOS-grouper-20120908-27.zip)
/sdcard being the place on the device you want the file to be placed in
In some cases, /sdcard may not work, but /data/media should work.
Another option is to restock using a factory image from Google and then start over with flashing CWM, and then copying over your ROM/Kernel/Gapps files.
adb push
espionage724 said:
You can manually push ROM/Kernel/Gapps files to /sdcard using adb push from Android SDK.
I can't exactly recall if you can push the files from bootloader, or recovery, or both, but a push command would look like:
Code:
adb push FILE.zip /sdcard
adb push being the ADB command to push files from the computer to the device
FILE.zip being the name of the file you want to send to the device (for example, EOS-grouper-20120908-27.zip)
/sdcard being the place on the device you want the file to be placed in
In some cases, /sdcard may not work, but /data/media should work.
Another option is to restock using a factory image from Google and then start over with flashing CWM, and then copying over your ROM/Kernel/Gapps files.
Click to expand...
Click to collapse
I cannot push as it says "device not found".
Ok, I had to restock and unroot. Now is working fine. I used also wug fresh toolkit.
Will have to root again and so on...
Thanks!
same as above
hey guys my nexus 2012 wifi running 4.3 rooted has TWERP and installed CM 10.1.3 for some dumb reason as the above mentioned i too wiped dalvik cache and sd via TWERP. Now im stuck on google logo with an unlock padlock logo I can still go to fastboot but cant open recovery when I open it I only get the green robot with red warning sign. Im desperate I used wugfresh toolkit 1.7.5 and use the FlashStock+Unroot everything is ok on the script exept for bootloader failed my device got 4.18 while it says the toolkit needs 4.2+ i dont remember anymore. now im still stuck on google logo with an unlock padlock logo. Hope you guys can help me its my daughter's tablet she'll be sad without it..:crying: well be very thankful for any help thank in advance.
heres the code
Flash Stock + Unroot...
------------------------------------------------------------------
erasing 'boot'...
OKAY [ 0.020s]
finished. total time: 0.023s
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [ 0.039s]
finished. total time: 0.039s
erasing 'recovery'...
OKAY [ 0.020s]
finished. total time: 0.020s
******** Did you mean to fastboot format this partition?
erasing 'system'...
OKAY [ 0.044s]
finished. total time: 0.045s
******** Did you mean to fastboot format this partition?
erasing 'userdata'...
OKAY [ 0.977s]
finished. total time: 0.977s
sending 'bootloader' (2100 KB)...
OKAY [ 0.258s]
writing 'bootloader'...
OKAY [ 0.709s]
finished. total time: 0.968s
rebooting into bootloader...
OKAY [ 0.020s]
finished. total time: 0.020s
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
archive does not contain 'system.sig'
--------------------------------------------
Bootloader Version...: 4.23
Baseband Version.....: N/A
Serial Number........: 015d257818580418
--------------------------------------------
checking product...
OKAY [ 0.030s]
checking version-bootloader...
OKAY [ 0.022s]
sending 'boot' (4896 KB)...
OKAY [ 0.584s]
writing 'boot'...
OKAY [ 0.179s]
sending 'recovery' (5432 KB)...
OKAY [ 0.653s]
writing 'recovery'...
OKAY [ 0.186s]
erasing 'system'...
OKAY [ 0.057s]
sending 'system' (529061 KB)...
FAILED (remote: (Nv3pBadReceiveLength))
finished. total time: 4.274s
Booting up your freshly flashed stock device...
------------------------------------------------------------------
Wait for your device to finish booting up...
- It may appear to be boot looping; just wait...
- It could take 5-10 minutes; please be patient...
When its finally booted back up, please remember
to re-enable USB debugging if you plan on using
the toolkit to perform other operations.
NOTE: If this process was too quick and your device
is still in bootloader mode, then flashing stock may
have failed or been incomplete. Simply check the
log above: if you notice it skipped steps because it
didn't meet certain requirements, like the bootloader
or baseband version, then consider enabling 'Force Flash'
mode in the toolkits options menu and trying the
'Flash Stock + Unroot' processs again. Cheers.
Press any key to exit...
I am trying to flash my Nexus 7 entirely back to stock 4.3. I was following the guide that is sticky'd in this thread to flash the Google image. This is these are the errors I get:
Code:
C:\android-sdk\platform-tools>fastboot erase boot
erasing 'boot'...
OKAY [ 2.532s]
finished. total time: 2.535s
C:\android-sdk\platform-tools>fastboot erase cache
erasing 'cache'...
OKAY [ 0.032s]
finished. total time: 0.033s
C:\android-sdk\platform-tools>fastboot erase recovery
erasing 'recovery'...
OKAY [ 0.021s]
finished. total time: 0.022s
C:\android-sdk\platform-tools>fastboot erase system
erasing 'system'...
OKAY [ 0.021s]
finished. total time: 0.022s
C:\android-sdk\platform-tools>fastboot erase userdata
erasing 'userdata'...
OKAY [ 0.021s]
finished. total time: 0.022s
C:\android-sdk\platform-tools>fastboot flash bootloader bootloader-grouper-4.23.
img
sending 'bootloader' (2100 KB)...
OKAY [ 0.266s]
writing 'bootloader'...
FAILED (remote: (Unknown error code))
finished. total time: 0.415s
Also the bootloader keeps freezing on me after I attempt this. I also am unable to restart bootloader by command or the selection, it just goes to a black screen and "fastboot devices" gives me ????????????? instead of my device ID. I can fix this by turning it off and booting back into the bootloader and it will properly display my device ID.
It is unlocked and on 4.23 that's listed there. What else can I do?
engagedtosmile - You should post this question in comminus' stickied thread. I read all 54 pages of it and he's very good at diagnosing the problem and helping to get it resolved.
engagedtosmile said:
I am trying to flash my Nexus 7 entirely back to stock 4.3. I was following the guide that is sticky'd in this thread to flash the Google image. This is these are the errors I get:
Code:
C:\android-sdk\platform-tools>fastboot erase boot
erasing 'boot'...
OKAY [ 2.532s]
finished. total time: 2.535s
C:\android-sdk\platform-tools>fastboot erase cache
erasing 'cache'...
OKAY [ 0.032s]
finished. total time: 0.033s
C:\android-sdk\platform-tools>fastboot erase recovery
erasing 'recovery'...
OKAY [ 0.021s]
finished. total time: 0.022s
C:\android-sdk\platform-tools>fastboot erase system
erasing 'system'...
OKAY [ 0.021s]
finished. total time: 0.022s
C:\android-sdk\platform-tools>fastboot erase userdata
erasing 'userdata'...
OKAY [ 0.021s]
finished. total time: 0.022s
C:\android-sdk\platform-tools>fastboot flash bootloader bootloader-grouper-4.23.
img
sending 'bootloader' (2100 KB)...
OKAY [ 0.266s]
writing 'bootloader'...
FAILED (remote: (Unknown error code))
finished. total time: 0.415s
Also the bootloader keeps freezing on me after I attempt this. I also am unable to restart bootloader by command or the selection, it just goes to a black screen and "fastboot devices" gives me ????????????? instead of my device ID. I can fix this by turning it off and booting back into the bootloader and it will properly display my device ID.
It is unlocked and on 4.23 that's listed there. What else can I do?
Click to expand...
Click to collapse
Hi, engagedtosmile...
Yeah.. there is a known issue with the v4.23 bootloader.
Your problem could be the bootloader v4.23 from build JWR66Y.... try flashing the bootloader v4.23 from build JWR66V.
See this thread for details (a couple of people have uploaded the bootloader v4.23 from build JWR66V, for both 'grouper' and 'tilapia' Nexus 7's on this thread - when I find the time, I'm going to upload them myself... so I don't have to keep hunting out the link).
Hope this helps.
Rgrds,
Ged.
GedBlake said:
Hi, engagedtosmile...
Yeah.. there is a known issue with the v4.23 bootloader.
Your problem could be the bootloader v4.23 from build JWR66Y.... try flashing the bootloader v4.23 from build JWR66V.
See this thread for details (a couple of people have uploaded the bootloader v4.23 from build JWR66V, for both 'grouper' and 'tilapia' Nexus 7's on this thread - when I find the time, I'm going to upload them myself... so I don't have to keep hunting out the link).
Hope this helps.
Rgrds,
Ged.
Click to expand...
Click to collapse
Thanks but I have done that as instructed in the sticky post (I ran into the error before but was able to flash it fine). I thought I would try to Lock the bootloader and unlock it again, it locked fine but now errors out when unlocking.
I am back to step 1 it seems.:crying:
engagedtosmile said:
Thanks but I have done that as instructed in the sticky post (I ran into the error before but was able to flash it fine). I thought I would try to Lock the bootloader and unlock it again, it locked fine but now errors out when unlocking.
I am back to step 1 it seems.:crying:
Click to expand...
Click to collapse
Have you tried changing to a different USB port on your PC... or a different USB cable, or even a different PC.
I know I've had difficulties, when trying to send/write to 'system', and changing to a different USB port usually resolves the problem... so it might be worth a shot.
Gotta be really careful when flashing bootloaders, as one false move can cause hardbrick, which is pretty grim.
Rgrds,
Ged.
GedBlake said:
Have you tried changing to a different USB port on your PC... or a different USB cable, or even a different PC.
I know I've had difficulties, when trying to send/write to 'system', and changing to a different USB port usually resolves the problem... so it might be worth a shot.
Gotta be really careful when flashing bootloaders, as one false move can cause hardbrick, which is pretty grim.
Rgrds,
Ged.
Click to expand...
Click to collapse
I will have to try it on my home PC later. I have tried different cables and ports on my work PC to no avail. It just won't unlock at all now.
My N7 "2012" kept freezing, so I put it in bootloader and tried to do a recovery mode reset to stock. It froze during the process.
Now, the only thing I can do is get it into bootloader mode manually by holding the buttons. It frezes if I choose any of the options from the bootloader screen including restarting the bootloader from the bootloader screen without holding power and volume.
I have tried the Nexus Root Toolkit a bunch of times with the "flash stock + unroot (soft bricked)" feature, testing different factory builds and the best results are below:
Flash Stock + Unroot...
------------------------------------------------------------------
erasing 'boot'...
OKAY [ 2.526s]
finished. total time: 2.526s
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [ 0.200s]
finished. total time: 0.200s
erasing 'recovery'...
OKAY [ 0.016s]
finished. total time: 0.016s
******** Did you mean to fastboot format this partition?
erasing 'system'...
OKAY [ 0.015s]
finished. total time: 0.015s
******** Did you mean to fastboot format this partition?
erasing 'userdata'...
OKAY [ 0.015s]
finished. total time: 0.015s
sending 'bootloader' (2100 KB)...
OKAY [ 0.264s]
writing 'bootloader'...
FAILED (remote: (Unknown error code))
finished. total time: 0.402s
rebooting into bootloader...
OKAY [ 0.020s]
finished. total time: 0.021s
< waiting for device >
PLEASE HELP! Keep in mind that I am a newb to messing with this stuff.
I have read forums and tried things that people suggested to others in similar situations, but I am pretty lost at this point. Keep in mind that my device is almost certainly wiped and definitely will not boot the OS.
Is your N7 the Wi-Fi or the 3G variant?
What was the name of the factory image you were trying to flash?
brad3626 said:
My N7 "2012" kept freezing, so I put it in bootloader and tried to do a recovery mode reset to stock. It froze during the process.
Now, the only thing I can do is get it into bootloader mode manually by holding the buttons. It frezes if I choose any of the options from the bootloader screen including restarting the bootloader from the bootloader screen without holding power and volume.
I have tried the Nexus Root Toolkit a bunch of times with the "flash stock + unroot (soft bricked)" feature, testing different factory builds and the best results are below:
PLEASE HELP! Keep in mind that I am a newb to messing with this stuff.
I have read forums and tried things that people suggested to others in similar situations, but I am pretty lost at this point. Keep in mind that my device is almost certainly wiped and definitely will not boot the OS.
Click to expand...
Click to collapse
After doing a bit of research, I've found out that there is a BAD version of the N7 2012 bootloader 4.23 floating around. The unsettling thing is that it's being supplied with a couple of the factory images that come straight from from the Google android devolpers page online. Anyway to make a long story short, I would try flashing the working version of the bootloader first off, then go from there with a factory reset. You can download the the working bootloader (bootloader-grouper-4.23.img) HERE --> h t t p : / / g o o . g l / q A D S A z (sorry about the spaces in the url, I'm new to the forum and can't post links yet, just delete the spaces)
BTW, its the same bootloader for N7 wifi OR 3G. md5 = df53028033c9eccf4fe5ba7bc198ce24
Here's how to install using fastboot:
1. Reboot To Your Bootloader On You Nexus 7 (Power off power button and volume down until you see bootloader screen)
2. Connect Your Nexus 7 To Your Computer
3. Open Up Command Prompt or terminal window (not sure if you are using windows/mac/linux)
4. CD to where you downloaded bootloader-grouper-4.23.img
5. Then type:
fastboot devices (to see if your N7 is connected correctly)
fastboot flash bootloader bootloader-grouper-4.23.img
fastboot reboot-bootloader
Then try the factory reset again.
If you don't have fastboot installed your computer you need it. Makes flashing your N7 a breeze... lock/unlock, custom recovery installs, going back to factory stock, all much more easy with fastboot.
You can get it from the android devolper site, h t t p : / / g o o . g l / 2 q p r for windows/mac/linux. All you need is the SDK tools, not the ADT bundle.
adomol said:
After doing a bit of research, I've found out that there is a BAD version of the N7 2012 bootloader 4.23 floating around. The unsettling thing is that it's being supplied with a couple of the factory images that come straight from from the Google android devolpers page online. Anyway to make a long story short, I would try flashing the working version of the bootloader first off, then go from there with a factory reset. You can download the the working bootloader (bootloader-grouper-4.23.img) HERE --> h t t p : / / g o o . g l / q A D S A z (sorry about the spaces in the url, I'm new to the forum and can't post links yet, just delete the spaces)
BTW, its the same bootloader for N7 wifi OR 3G. md5 = df53028033c9eccf4fe5ba7bc198ce24
Here's how to install using fastboot:
1. Reboot To Your Bootloader On You Nexus 7 (Power off power button and volume down until you see bootloader screen)
2. Connect Your Nexus 7 To Your Computer
3. Open Up Command Prompt or terminal window (not sure if you are using windows/mac/linux)
4. CD to where you downloaded bootloader-grouper-4.23.img
5. Then type:
fastboot devices (to see if your N7 is connected correctly)
fastboot flash bootloader bootloader-grouper-4.23.img
fastboot reboot-bootloader
Then try the factory reset again.
If you don't have fastboot installed your computer you need it. Makes flashing your N7 a breeze... lock/unlock, custom recovery installs, going back to factory stock, all much more easy with fastboot.
You can get it from the android devolper site, h t t p : / / g o o . g l / 2 q p r for windows/mac/linux. All you need is the SDK tools, not the ADT bundle.
Click to expand...
Click to collapse
Thank you for the help, unfortunately, it did not work.
I followed the instructions above, but the Nexus displayed "neither up nor cac partitions found" over and over
While cmd displayed:
C:\Users\Brad>fastboot devices
XXX fastboot
C:\Users\Brad>fastboot flash bootloader bootloader-grouper-4.23.img
sending 'bootloader' (2100 KB)...
OKAY [ 0.281s]
writing 'bootloader'...
FAILED (remote: (Unknown error code))
finished. total time: 3.213s
C:\Users\Brad>fastboot devices
XXX fastboot
C:\Users\Brad>fastboot flash bootloader bootloader-grouper-4.23.img
sending 'bootloader' (2100 KB)...
OKAY [ 0.271s]
writing 'bootloader'...
FAILED (remote: (Unknown error code))
finished. total time: 3.205s
Erovia said:
Is your N7 the Wi-Fi or the 3G variant?
What was the name of the factory image you were trying to flash?
Click to expand...
Click to collapse
Wi-Fi
I have tried every one that the NRT offered.
Just read this guide and download the latest factory image from here.
Good luck.
Erovia said:
Just read this guide and download the latest factory image from here.
Good luck.
Click to expand...
Click to collapse
I read that guide.
But that guide seems to be written with the assumption that the device can boot into the OS
No ADB device is found because I can only boot into bootloader.
That part is only for the driver installation. You can skip to the "Extract the Factory Image" part and follow it from there.
Erovia said:
That part is only for the driver installation. You can skip to the "Extract the Factory Image" part and follow it from there.
Click to expand...
Click to collapse
Following from "Extract the Factory Image" part, this is what I am getting:
C:\Users\Brad>cd \Users\brad\AppData\Local\Android\android-sdk\platform-tools
C:\Users\Brad\AppData\Local\Android\android-sdk\platform-tools>fastboot devices
XXX fastboot
C:\Users\Brad\AppData\Local\Android\android-sdk\platform-tools>adb reboot-bootlo
ader
error: device not found
C:\Users\Brad\AppData\Local\Android\android-sdk\platform-tools>fastboot oem unlo
ck
...
FAILED (command write failed (Unknown error))
finished. total time: 0.590s
C:\Users\Brad\AppData\Local\Android\android-sdk\platform-tools>fastboot erase bo
ot
erasing 'boot'...
FAILED (command write failed (Invalid argument))
finished. total time: 0.017s
C:\Users\Brad\AppData\Local\Android\android-sdk\platform-tools>fastboot erase ca
che
erasing 'cache'...
FAILED (command write failed (Invalid argument))
finished. total time: 0.017s
C:\Users\Brad\AppData\Local\Android\android-sdk\platform-tools>fastboot erase re
covery
erasing 'recovery'...
FAILED (command write failed (Invalid argument))
finished. total time: 0.022s
C:\Users\Brad\AppData\Local\Android\android-sdk\platform-tools>fastboot erase sy
stem
erasing 'system'...
FAILED (command write failed (Invalid argument))
finished. total time: 0.017s
C:\Users\Brad\AppData\Local\Android\android-sdk\platform-tools>fastboot erase us
erdata
erasing 'userdata'...
FAILED (command write failed (Invalid argument))
finished. total time: 0.018s
C:\Users\Brad\AppData\Local\Android\android-sdk\platform-tools>fastboot flash bo
otloader bootloader-grouper-4.23.img
error: cannot load 'bootloader-grouper-4.23.img': Invalid argument
On the bootloader screen is your bootloader shown as "locked" or "unlocked" ?
Erovia said:
On the bootloader screen is your bootloader shown as "locked" or "unlocked" ?
Click to expand...
Click to collapse
lock state - unlocked
What's the output of fastboot -w update image-nakasi-kot49h.zip ?
Erovia said:
What's the output of fastboot -w update image-nakasi-kot49h.zip ?
Click to expand...
Click to collapse
C:\Users\Brad\AppData\Local\Android\android-sdk\platform-tools>fastboot -w updat
e image-nakasi-kot49h.zip
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
archive does not contain 'system.sig'
error: out of memory
I have no idea what this "out of memory" error is. If I were you I would restart my computer, run fastboot from a cmd opened as Admin and try out different usb ports.
Erovia said:
I have no idea what this "out of memory" error is. If I were you I would restart my computer, run fastboot from a cmd opened as Admin and try out different usb ports.
Click to expand...
Click to collapse
I restarted, ran cmd as admin and tried every USB port and got this as the result each time:
C:\Users\Brad\AppData\Local\Android\android-sdk\platform-tools>fastboot -w updat
e image-nakasi-kot49h.zip
< waiting for device >
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
archive does not contain 'system.sig'
--------------------------------------------
Bootloader Version...: 4.23
Baseband Version.....: N/A
Serial Number........: XXX
--------------------------------------------
checking product...
OKAY [ 0.031s]
checking version-bootloader...
OKAY [ 0.016s]
sending 'boot' (4992 KB)...
OKAY [ 5.460s]
writing 'boot'...
FAILED (remote: (FileWriteFailed))
finished. total time: 8.518s
The Nexus was frozen at this point and had to be manually forced to restart bootloader.
Do you have a valid warranty for the N7? I'm asking because it seems that your N7's internal memory got corrupted. I might not be right, but that's my best guess.
Erovia said:
Do you have a valid warranty for the N7? I'm asking because it seems that your N7's internal memory got corrupted. I might not be right, but that's my best guess.
Click to expand...
Click to collapse
Thanks for your help
I bought it 13 months ago (perfect timing, coincidentally, right?), so if I could find the receipt I would still be screwed.
I would still try to send it to Asus or Google. Maybe they repair it for a reasonable price.
(But if you plan to do that try to relock you bootloader with fastboot oem lock)
Erovia said:
I would still try to send it to Asus or Google. Maybe they repair it for a reasonable price.
(But if you plan to do that try to relock you bootloader with fastboot oem lock)
Click to expand...
Click to collapse
fastboot oem lock
...
(bootloader) Bootloader is locked now.
OKAY [ 36.032s]
finished. total time: 36.032s
But then the N7 freezes and after manually restarting in bootloader it is still unlocked.
Then send is as it is. You can't do any more about it.
Good luck.
Gave my 2012 N7 to my nephew, a month later it's frozen 'Google' in the center and a green arrow / start up top. Using the vol. keys I can cycle between start/reboot bootloader/recovery mode/power off, selecting anything but power off loops.
Also, I had to reinstall the sdk but 'adb devices' shows nothing. Any hope of bringing this back to life?
joe2262 said:
Gave my 2012 N7 to my nephew, a month later it's frozen 'Google' in the center and a green arrow / start up top. Using the vol. keys I can cycle between start/reboot bootloader/recovery mode/power off, selecting anything but power off loops.
Also, I had to reinstall the sdk but 'adb devices' shows nothing. Any hope of bringing this back to life?
Click to expand...
Click to collapse
If you are in fastboot, adb commands will not work, you need to use "fastboot devices" to see if you are connected. If you are flash a recovery from fastboot and you can work fairly easily from there. Is the bootloader locked or unlocked?
EpJoker said:
If you are in fastboot, adb commands will not work, you need to use "fastboot devices" to see if you are connected. If you are flash a recovery from fastboot and you can work fairly easily from there. Is the bootloader locked or unlocked?
Click to expand...
Click to collapse
Yep, agreed...
joe2262 said:
Gave my 2012 N7 to my nephew, a month later it's frozen 'Google' in the center and a green arrow / start up top. Using the vol. keys I can cycle between start/reboot bootloader/recovery mode/power off, selecting anything but power off loops.
Also, I had to reinstall the sdk but 'adb devices' shows nothing. Any hope of bringing this back to life?
Click to expand...
Click to collapse
Hi, joe2262...
'adb devices' will not show anything if the device is booted into fastboot mode.
The command you need is 'fastboot devices'...
This will confirm you have a working FASTBOOT connection... and from which you can run fastboot commands... such as fastboot flashing a Custom Recovery (CWM or TWRP).
Or alternatively, fastboot flashing back to factory stock.
Either way... I suspect your Nexus 7 is likely recoverable.
At worst, it's just 'softbricked'.
Rgrds,
Ged.
Yes, it's unlocked but I want to go to a stock install.
C:\Users\joe\Desktop\android\android-sdk-windows\nakasi-jdq39>flash-all
...
(bootloader) Bootloader is already unlocked
OKAY [ 0.031s]
finished. total time: 0.031s
erasing 'boot'...
OKAY [ 0.016s]
finished. total time: 0.016s
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [ 0.016s]
finished. total time: 0.016s
erasing 'recovery'...
OKAY [ 0.016s]
finished. total time: 0.016s
******** Did you mean to fastboot format this partition?
erasing 'system'...
OKAY [ 0.016s]
finished. total time: 0.016s
******** Did you mean to fastboot format this partition?
erasing 'userdata'...
OKAY [ 0.016s]
finished. total time: 0.016s
sending 'bootloader' (2096 KB)...
OKAY [ 0.281s]
writing 'bootloader'...
FAILED (remote: (FileWriteFailed))
finished. total time: 2.262s
rebooting into bootloader...
FAILED (command write failed (Unknown error))
finished. total time: 0.640s
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
archive does not contain 'system.sig'
error: out of memory
Press any key to exit...
??????????????????????
It worked fine months ago when I went back to stock. Damn kids!
Do I need to format boot, recovery and system, is that the proble,m?
Sent from my SM-T310 using xda premium
Hello people,
I think, I've killed my nexus7 nakasi - 16GB model for ever today. Could you please help me try to resurrect it, or did I really kill him ?
Before, I was using unlocked, SuperSU rooted, KK 4.4.4 with TWRP bootloader and disabled some services (to stop stupid ota notifications coming up).
Today I wanted to try 5.1.1 (LMY47V), so I downloaded the ota, unzipped it, loaded adb, reboot into bootloader and ran flash-all.bat, as usually (I have already done it coulpe times before and never had any problems), until now.
Everything was running fine, until rebooting into bootloader ... ok.. waiting for device. The command line has stuck, so I removed table, terminated job, and tried booting bootloader by volume- & power. Nothing.
Please find my log output below.
Code:
D:\temp\adb>adb reboot bootloader
D:\temp\adb>flash-all.bat
...
(bootloader) Bootloader is already unlocked
OKAY [ 0.022s]
finished. total time: 0.022s
erasing 'boot'...
OKAY [ 0.033s]
finished. total time: 0.036s
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [ 0.266s]
finished. total time: 0.270s
erasing 'recovery'...
OKAY [ 0.036s]
finished. total time: 0.039s
******** Did you mean to fastboot format this partition?
erasing 'system'...
OKAY [ 0.319s]
finished. total time: 0.322s
******** Did you mean to fastboot format this partition?
erasing 'userdata'...
OKAY [ 8.775s]
finished. total time: 8.778s
sending 'bootloader' (2100 KB)...
OKAY [ 0.268s]
writing 'bootloader'...
OKAY [ 1.249s]
finished. total time: 1.524s
rebooting into bootloader...
OKAY [ 0.020s]
finished. total time: 0.020s
< waiting for device >
^CTerminate batch job (Y/N)? y
Is there anything I can do to revive him ? Or is he dead now ?
I have tried:
VOL+ VOL- POWER
VOL- POWER
Disconnecting battery + combination of previous before & after battery removal
Connecting power + combination of previous before & after battery removal
When i connect it to my pc now, I can hear sound of new device connected - in APX mode.
Holding POWR VOL+ VOL- for 15 sec, causes tablet to disconnect and connect again in APX, but bootloader won't start.
Plugging it on charger does nothing, battery indicator doesn't show up.
Please help !
remusator said:
Hello people,
I think, I've killed my nexus7 nakasi - 16GB model for ever today. Could you please help me try to resurrect it, or did I really kill him ?
Before, I was using unlocked, SuperSU rooted, KK 4.4.4 with TWRP bootloader and disabled some services (to stop stupid ota notifications coming up).
Today I wanted to try 5.1.1 (LMY47V), so I downloaded the ota, unzipped it, loaded adb, reboot into bootloader and ran flash-all.bat, as usually (I have already done it coulpe times before and never had any problems), until now.
Everything was running fine, until rebooting into bootloader ... ok.. waiting for device. The command line has stuck, so I removed table, terminated job, and tried booting bootloader by volume- & power. Nothing.
Please find my log output below.
Code:
D:\temp\adb>adb reboot bootloader
D:\temp\adb>flash-all.bat
...
(bootloader) Bootloader is already unlocked
OKAY [ 0.022s]
finished. total time: 0.022s
erasing 'boot'...
OKAY [ 0.033s]
finished. total time: 0.036s
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [ 0.266s]
finished. total time: 0.270s
erasing 'recovery'...
OKAY [ 0.036s]
finished. total time: 0.039s
******** Did you mean to fastboot format this partition?
erasing 'system'...
OKAY [ 0.319s]
finished. total time: 0.322s
******** Did you mean to fastboot format this partition?
erasing 'userdata'...
OKAY [ 8.775s]
finished. total time: 8.778s
sending 'bootloader' (2100 KB)...
OKAY [ 0.268s]
writing 'bootloader'...
OKAY [ 1.249s]
finished. total time: 1.524s
rebooting into bootloader...
OKAY [ 0.020s]
finished. total time: 0.020s
< waiting for device >
^CTerminate batch job (Y/N)? y
Is there anything I can do to revive him ? Or is he dead now ?
I have tried:
VOL+ VOL- POWER
VOL- POWER
Disconnecting battery + combination of previous before & after battery removal
Connecting power + combination of previous before & after battery removal
When i connect it to my pc now, I can hear sound of new device connected - in APX mode.
Holding POWR VOL+ VOL- for 15 sec, causes tablet to disconnect and connect again in APX, but bootloader won't start.
Plugging it on charger does nothing, battery indicator doesn't show up.
Please help !
Click to expand...
Click to collapse
Hi, remusator...
Sorry to be the bearer of bad news, but it sounds like your Nexus 7 is hardbricked. Both APX mode and the lack of the battery charging animation are classic hallmarks of a bootloader that may have have become corrupted, erased or accidentally overwritten.
APX mode is the state the N7 defaults to in the absence of a working bootloader, and with the expectation that somebody with the necessary software tools and knowledge will be able to nvFlash a replacement bootloader.
Unfortunately, there is no universal nvFlash tool available for the Nexus 7. The only way of accessing nvFlash on the Nexus 7 is, if you had, at some previous point, created your own unique Nexus 7 device dependant 'wheelie' blobs via the Flatline procedure.
So, without a working bootloader, the Nexus 7 cannot boot, nor can it be reflashed via fastboot commands (since it's the bootloader that 'accepts' those commands).
The only option (other than via nvFlash with previously generated Flatline 'wheelie' blobs, and which I suspect you don't have) is to have the motherboard replaced.
I have read accounts here on XDA of people sourcing Nexus 7 replacement motherboards from various online sources, and performing the replacement themselves. I don't know how easy or difficult it is, or how much it might cost (probably not much), but with a dead bootloader, it's likely the only way of resurrecting your Nexus 7.
Good luck...
Rgrds,
Ged.
Addendum: I assume you've tried all of these (that might be applicable)...
[REF] Nexus 7 Button Combinations
http://forum.xda-developers.com/showthread.php?t=2133986
----