Database Users

[OFFICIAL] [CUSTOM] Android 4.0.1 by Samsung for SGS2

DOWNLOAD: http://hotfile.com/dl/137476445/51a9d34/I9100XXKP1_SamMobile.com_Android_4.0.1_CUSTOM.rar.html
Password: samfirmware.com
After a long wait Samsung has finally started testing Android 4.0.
Last week our “insider” presented us with XXKP1.
The Android version of this ROM is Android 4.0.1.
The build date is 7 december 2011.
As you may know of us we often get these leaks prior to release.
After we did some checks on it we can confirm that we’re dealing with a “CUSTOM” Samsung build.
We strongly advise people who only flash stock ROMs to not flash this.
As you all may know we only offer stock ROMs so you will not find this firmware on our usual firmware page.
We at Sammobile offcourse have tested this ROM in all curiousity.
Samsung uses Android 4.0 with their own TW-Launcher and Android 4.0 tweaks.
Below you will find a video review of this ROM.
http://www.youtube.com/watch?v=ISAI6qbQm6U&list=UUzQl4TBDKoGyVhpL2ykCJgw&feature=plcp
What works in I9100XXKP1?
All the Basics work like calling , sms , internet and more.
Some applications havent been worked out correct so they will force cose on stress.
Because we are dealing with a “CUSTOM” ROM here it can occur that the phone will react very slow from time to time.
There is also the chance of some “RANDOM REBOOTS”
We at Sammobile advise people to not use thhis ROM for daily usage.
If you want to download this firmware then you can do so via the provided link below.
Again if you only flash STOCK ROMs then dont flash this.
Because you flash this rom with “unsecure” kernel the phone thinks its “CUSTOM” and will start counting on your custom counter.
You will loose your warranty bercause of this.
Click to expand...
Click to collapse
Source: http://www.sammobile.com/2011/12/14/exclsuive-android-4-0-1-by-samsung-for-sgs2-custom/

Downloading now and will get a mirror up ASAP

hehe ^^ hotfile
where is multiupload like he said ?
Thanks we have wait a lot

Appreciate the share, hope we can see much improved customs based on this.

I may be wrong but i cant see a difference between this rom and checkrom with 1.6 ics theme?
Not ttrying to be rude or anything
Sent from my GT-I9100 using xda premium

Please continue discussion of this ROM here in our General section
Thread closed.

[p1010] Compatiable Custom Rom for p1010

Hi Guys,
Can somebody point out what are the compatiable Custom ROM for p1010...
I am looking for best custom ROMS ..
Cheers!!!!!

Well, just the CleamROM,
Motafoca said that will port cyanogenmod 9, but this will take a time.

samcortez said:
Well, just the CleamROM,
Motafoca said that will port cyanogenmod 9, but this will take a time.
Click to expand...
Click to collapse
This is correct. CleanROM is the only "non-stock" ROM available for the 1010 and technically is not a "Custom" ROM. It is based upon a "Stock" Gingerbread firmware with some "bloat" removed and some theme's added. Also, Scott from Scottroms (the developer of CleanRom) I believe has sold his Galaxy Tab and will not be providing future updates.
Motafoca is indeed working on a CyanogenMod (CM) build for the P1010 but to my knowledge he is the ONLY developer doing so. Let's all wish him luck and support him in his journey because once he is successful it will open the door to other developers.
FYI, I have created an in-depth thread specifically for the GT-P1010 that can be viewed HERE.
I will be updating that thread and adding the details above to it. My hope is that we can all discuss our "forgotten" P1010's in that thread so as to be able to find all the information more easily.

I'm one of the testers of motafoca. And well, actually, we are trying to ort cyanogenmod 7.2, but the zip doesnt works, p1010 is a little complicate. And motafoca is working on 4 devices at same time. Soo its hard. I think that in march we finish with cyanogenmod 7.2 (note: the biggest problem is do a flashable rom of cyanogenmod, after that, is just pick the drivers of gingerbread from the source)

Thanks Guys for that information...

[samsung i857(doubletime)]ROM devlopers and users of this phone

HI all , i lunched this thread after weeks of googling and usless search for a new stock or custom rom to update my phone (samsung sgh-i857 doubletime) it's a dual screen phone with querty built-in keyboard it's from at&t and it is stuck on android 2.2.2, i'm very sad that they and after years from lunching it didn't back it up with a single soft update -_- ... and i know that there are users who bought this phone like me and seek help.. i know that it's not this easy but if you are a devloper help us by creating a custom rom for it ....if you are a user of this phone please support this thread by commenting so we can get an update for it :good: ps: i attached informations for it's cpu

Hello good sir, I like you am a noobish Doubletime user who is struggling to update it to Gingerbread. So far I have been somewhat able to use the Cyanogenmod source code and I have built a CWM Recovery for the device but that seems to have hard bricked it... I ordered a new one off ebay for $15 and I'm ready to start cooking. You have my support!

Just an update.
I have a plan I have on how to get this runnin.
1. Port CWM to the DoubleTime through Cyanogemod 6.
2. Get a working version of Cyanogenmod 6 working on the DoubleTime to hopefully free up some space.
3. Find if Gingerbread can run on Froyos kernel.
From there I'll either be building a GingerBread compatable kernel or Cyanogenmod 7 depending on compatability. Any advice or help would be very appreciated.

Being new to ROM building I'm a little lost and hesitant on flashing things but here's what I know so far.
The DoubleTime uses a Qualcomm MSM7230 same as the HTC Vision. I forked it's Github respiratory and I'll be using it as a base as recommended by the Cyanogenmod porting guide.
The partitions sizes (as a accurately as I can estimate them) are:
/cache=21.05MB
/data=176.65MB
/system=194.38MB
I may need to know the recovery partition size but I'm not sure how to find that out.
I have the recovery.img and the boot.img as well as the zImage. So as soon as the repo sync is done I'll be on my way.

I'm back again today with somewhat mixed news, I can find most of the partitions and their names (I've learned a lot today) but I can not seem to find the boot, recovery or ramdisk partitions. I'm already boggled by the what seems to be unconventional naming setup for partitions. Put all of my "notes" in a text docement in the attachments section. Any help with this is very appertiated. I can type and post anything into the ADB shell you need me too.
I'm beginning to feel like I'm talking to myself, I probably am...

Upon reading forum rules and such it has come to my attension that this is the wrong forum for this kind of thread, So I have made a new thread in the Miscellaneous Android Developement Forum that will hopefully be more useful at getting more proffesional and opinionated help.
http://forum.xda-developers.com/showthread.php?t=2651728

[DISCUSSION][I9300][Touchwiz][Android 4.4.4] -->back-to-n00t by arter97<--

Since Samsung stopped supporting the international galaxy S3 model (aka GT-I9300) claiming that the culprit is that it only has 1 GB RAM, so system apps cannot be run correctly, XDA Developers refused to settle down releasing the first milestone named ArchiPort, and here comes the other BIG EVENT.... :victory:
This is a discussion thread for the "back-to-n00t" project by @arter97, where latest Touchwiz Android 4.4.4 ported to the I9300 from the Korean version SHV-E210S, to keep the origional development thread clean and only development-related ...
before getting started, you must remember the what-so-called a disclaimer:
Your Warranty is now voided!
neither @arter97 nor me nor anybody is responsible for bricked devices, dead SD cards, exploded phones.
It's your choice to flash this ROM, not anybody else. If you don't know what you are doing, then i strongly advice you to do some research, or leave it until it is complete.
Also Mind that this is still Work-in-Progress
-->Features<--
**Stock Touchwiz Android 4.4.4**
**Heavily De-bloated**
**Deodexed, zipaligned, uncompressed**
**De-KNOXed**
What you need to know:
-->This ROM file contains kernel modified specifically for this ROM.
-->This ROM is heavily debloated, so it is very likely to find some system apps missing
-->This ROM does not supports any other custom kernels including arter97 kernel.
-->This is based on Korean firmware, some stuffs may remain in Korean(e.g. Dialer).
-->BusyBox or Superuser is not included!
For more info head to the origional development thread
Download:
V1
V2
please do not make mirrors unless you have asked @arter97

-->Changelog<--
V1:
initial release to XDA-Developers...
V2:
RIL fixed (SMS and signal strength now fully functional)
Fixed Call logs being empty
Camera shutter sound control enabled
More de-bloated
Added missing /preload apps
T Roaming settings removed
Lockscreen shortcut settings added

Known issues:
Signal strength not presented properly
Sending SMS is broken. Receiving SMS works well
Notice that it was reported that using third-party apps solve the problem, please try it out.
USSD not working, keeps loading endlessly
PC cannot detect the device when connected via USB for some users (for me i have no problems!)
rare graphical glitches "graphics stuttering for 0.1 seconds."
RAM Management Problems
Bluetooth connecting issues with some devices/car kits when calling.
Call Log is always empty

ROM overview on videos
you can enjoy some videos concerning this awesome ROM here
Enjoy

Reserved
Reserved 2

sms working
as i said in the other thread, sms is working if you use a third party app from playstore...hope it helps

Richardvinyard said:
as i said in the other thread, sms is working if you use a third party app from playstore...hope it helps
Click to expand...
Click to collapse
Can you recommend one, for instance the one you are using??

Congrats!
I want to congratulate to @arter97 for his work, I'll being paying attention until stable ROM release to try it :fingers-crossedOnly one device to use, I can't permit me to lose connection :crying.
Question: I'm from chile... If I install this ROM, need to install local modem to avoid "no network" issue? (Obviously making backup of EFS before flashing).
Thanks!
Note: I can't see screenshots in official post "[I9300] [Touchwiz Android 4.4.4] back-to-n00t; Bring the LTE fun back to 3G". Please, upload more to another site!!!
Note 2: I think is the link in post that no allow me see the pictures.... No!! It's @arter97's website, error 404.

Wyneg said:
I want to congratulate to @arter97 for his work, I'll being paying attention until stable ROM release to try it :fingers-crossedOnly one device to use, I can't permit me to lose connection :crying.
Question: I'm from chile... If I install this ROM, need to install local modem to avoid "no network" issue? (Obviously making backup of EFS before flashing).
Thanks!
Note: I can't see screenshots in official post "[I9300] [Touchwiz Android 4.4.4] back-to-n00t; Bring the LTE fun back to 3G". Please, upload more to another site!!!
Note 2: I think is the link in post that no allow me see the pictures.... No!! It's @arter97's website, error 404.
Click to expand...
Click to collapse
Concerning the modem question i also have the same question asked in the development thread.
Screenshots and downloads question: i think arter's site is down for a while may be...
I am also having the same issue here when trying to download
We have to wait for arter's website to get back so i can download it and post screenshots

FYI
Mostafa Wael said:
Congratulations !!!
Hope the SMS error is fixed soon, that is a deal breaker for me sadly...
I will open a general thread for this project so we keep that thread only for development, of course if you wish
Click to expand...
Click to collapse
arter97 said:
No I think this will be enough.
Developers can contact via PM
Click to expand...
Click to collapse
belmethos said:
Lol he said no need
Click to expand...
Click to collapse

Yeah, that's my fear... I love custom ROMs, but my first experience was awful, I lost connection to network and sim was asking for PIN number... I had to send to repair my S3, only with 2 weeks of usage!!! (that occured 3 months ago) :crying:
Now, I'm using S5 Sensation ROM and I think is great, but I want to try others available developments
Greetings!

T0nyCr said:
FYI
Click to expand...
Click to collapse
Yeah i noticed now
So you advice that thread should be closed?
But I think there will be so much fuss about it later, for example after it was discovered that SMS seems to be fixed with third-party apps.
And when the KK kernel source for the korean model is released, it will be more stable... So
May be @arter97 says something about this thread. If he wants that this thread must be closed then i have no problems... I just wanted to help
I am having connection problems here so i didn't see a lot of replies in the development thread. Thanks for letting me know..

I ask all of you to donate to the developers ..
They work every day to give us a free firmware kitkat stable ...
In a few hours have succeeded with hard work to give us a firmware almost totally stable ... finally soon we will have a stable firmware "semi-official"! :laugh::highfive::good:
Sorry for english!

why can not install ?

You need to download the ROM first

yes i now but instalation aborted why?

Spluwicho said:
yes i now but instalation aborted why?
Click to expand...
Click to collapse
-Corrupted file
-Wrong or old recovery

Delete

Is this ROM Sudden Death fix patched??

As kernel indicates the battery capacity in milliamp Android system , eg have a battery of 3500mAh and 2100mAh system warns all application says that the kernel is providing this information , but the forums only talk about percentage . excuse the word as it is not my native language.
Sent from my GT-I9300 using xda premium

Development of Android 8 ROM

Hey all you Sharp 306sh users!
I love this phone and decided to start a ROM port to Oreo 8.0.0!
To date here's what i got
1. Device tree built
2. ASOP stock rom built successfully
Here's what I need to get done next
1. Access bootloader to flash images
2. Test for vendor blobs needed so I can make the vendor tree (if required)
Your help on this would be greatly appreciated as I am just getting my feet we in this process, this is a great phone and I would love to see it updated.
Please let me know if you are interested in helping with this project!
Edit 8/6/2018: Device tree is on Github,
https://github.com/RobertCC18/sharp-306sh-rom
More to come once kernel is built!
Edit 10/12/2018:
I am uploading the first test build so I can get some help with the debug. THIS ROM IS GETS STUCK AT THE SHARP BOOT LOGO AND IS NOT READY FOR PRODUCTION DEVICES!!!!
That being said, any help and logs that you can send are greatly appreciated.
This zip can be flashed through TWRP, check the downloads section
XDA:DevDB Information
Android 8 Rom [stock], ROM for the Sharp Aquos Crystal
Contributors
RobbotCC
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
Based On: AOSP
Version Information
Status: Testing
Created 2018-07-15
Last Updated 2018-10-12

Great! I´ve got a 306SH model, i can be a tester... waiting for your first zip :highfive:

Awesome.
I tried this exact same thing before, but gave up soon after I couldn't diagnose what stopped my device from booting with my custom ROMs, as I could never find the logs.
It looks like you're making more headway than me, so I'd love to test it, or even just help out.
Keep on going! A GitHub would be great progress.

Update 7-4-18
Update - 7/24/2018
Recompiling Kernel with debug drivers included - current compiled kernel missing RAM Console support
Github repo coming soon!

Great! Always wanted a custom room on this phone. I can test it and try it out too

Good progress.
Make sure to keep us updated, once you have a GitHub repo, development should speed up.
I'm sure there are a few techies with this phone that would love to contribute to your ROM, myself included.
By the way, you said ASOP instead of AOSP in the original post.

Rhioun said:
Make sure to keep us updated, once you have a GitHub repo, development should speed up.
I'm sure there are a few techies with this phone that would love to contribute to your ROM, myself included.
By the way, you said ASOP instead of AOSP in the original post.
Click to expand...
Click to collapse
Thanks, whoops on the typo!
Been busy with work but hoping to upload device tree, kernel base and current build, waiting for kernel to finish building with RAM console drivers.

Update 8/6/2018
Github Created
https://github.com/RobertCC18/sharp-306sh-rom
Device tree is added, kernel coming soon!

About accessing the bootloader to flash images, I believe we've done this before.
Tewilove, the man behind rooting the 306SH managed to access it, and made a custom one to flash, if I do remember correctly.
https://forum.xda-developers.com/aquos-crystal/general/temp-root-306sh-t3129456
Worth a look.

No development in a while. We all hope you're still there.
I visited the Github and just found it to be text files and folders. Could you possibly post the WIP kernel or other vendor blobs on there,
so we have at least a basis to begin work on?
Thanks,

This is an amazing idea. My 306SH is rooted and ready for action.

Rhioun said:
No development in a while. We all hope you're still there.
I visited the Github and just found it to be text files and folders. Could you possibly post the WIP kernel or other vendor blobs on there,
so we have at least a basis to begin work on?
Thanks,
Click to expand...
Click to collapse
Yes I am still here and working on this, just haven't had much time lately. I will try to get the kernel and vendor blobs up within the next few days

Been waiting for a custom ROM for this phone. I'm ready to test it

Any update on the development of the ROM??????

Any progress?

Status Update
dzvxo said:
Any progress?
Click to expand...
Click to collapse
Hey everyone,
Sorry for the delay in development but I hit a major snag with the kernel build and am still working on overcoming it. The needed defconfig is missing so I found one that should get us close, at the very least it should allow us to see the RAM debug messages on boot failure.
Also, my internet has been to slow to upload the kernel to github but I have an upgrade and should be able to get it uploaded within the next couple days.
Please share any information that you find regarding this phone here on XDA and beyond, any info you can provide will help me get this up and running faster!

Hey, how's everything going? Any luck?

What's up with it?

Hey All,
Sorry for the delayed responses, this phone seems to be a lost cause. But I am not a quitter lol!
I am hopeing to get back into the swing if things here in the next few weeks and will post more updates and files here shortly
Current problems:
No debugging enabled
Kernel needs patched to support Android 6+

We wish you the best of luck!