Just seen its possible to root note 3 with out triping the Knox counter,how do I find my firmware so I down load the correct files?
Sent from my iPad using Tapatalk HD
paul01609 said:
Just seen its possible to root note 3 with out triping the Knox counter,how do I find my firmware so I down load the correct files?
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
Go into Settings -> General -> About Device -> Model Number
If you have the SM-N900W8 or the SM-N9005, you should be fine, continue.
Now on your dialer screen, type *#1234# and check your AP/CP values, if they are N900W8VLUBMI5 or N9005XXUBMJ1, continue.
Go to this forum by designgears, pick the one that matches your device, and then follow the steps.
http://forum.xda-developers.com/showpost.php?p=46389503&postcount=2
Many thanks mate
Sent from my iPad using Tapatalk HD
Related
Hello everyone, to know whether any of you know how about changing the CSC, with the old procedure of galaxy note does not work. Thank you very much
How do you mean old procedure? Just get CSC changer from the market.
Sent from my GT-N7100 using Tapatalk 2
RavenY2K3 said:
How do you mean old procedure? Just get CSC changer from the market.
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
He means in dialer *#272 etc etc.
OP do what RavenY2K3 told you
Hi
Is there any root method for the note 3 already?
Will it set the Knox flag to 1?
Sent from my SCH-I605 using Tapatalk 2
Snake-Plissken said:
Hi
Is there any root method for the note 3 already?
Will it set the Knox flag to 1?
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
for KNOX read this
http://forum.xda-developers.com/showthread.php?t=2447832
rzr86 said:
for KNOX read this
http://forum.xda-developers.com/showthread.php?t=2447832
Click to expand...
Click to collapse
Thanks.I was checking this thread already but didn't find any answer if just rooting well set the flag to 1.
Or is the only method to root so far by flashing a unrooted stock Rom?
Sent from my SCH-I605 using Tapatalk 2
Snake-Plissken said:
Thanks.I was checking this thread already but didn't find any answer if just rooting well set the flag to 1.
Or is the only method to root so far by flashing a unrooted stock Rom?
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
i don't much about samsung devices but what i understand from this thread
if you change the firmware the knox can't be reset and it will be at 0x1(if i am not wrong)
about root method i haven't seen any so far
You can root, look in the Android Development section of this forum.
Sent from my SM-N9005 using xda app-developers app
I have a SM N900 international version but I don't know my 3 letter region code. How to check this?
Thanks.
Sent from my SM-N900 using XDA Premium 4 mobile app
motumbo said:
I have a SM N900 international version but I don't know my 3 letter region code. How to check this?
Thanks.
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Just looked for this myself, you must be looking at the same thread as me!
Take a look at "Samsung Galaxy S / S2 / S3 CSC"
https://play.google.com/store/apps/details?id=com.manniakk.cscselector
Tick the 'root' box, Then 'Change CSC'. Dont worry, it wont change your CSC. it will show your region code, then close the app.
I'm not rooted so I couldn't check this. Anyway I'm gonna sell this piece of crap as soon as I can. I'm using a G zone commando as my daily driver for now, I know it is just a dual core, small screen but i could do whatever I want with it. Why don't we just call this iNote 3?
Sent from my SM-N900 using XDA Premium 4 mobile app
Dial --> *#1234#
Then you can see the CSC code. For example, N9005DBTMDK2, "DBT" is the regional code which means Germany.
Hi,
I can't seem to root my new galaxy note 3. I am using an international device with 4.4.2 KitKat. During the cache.img process Odin gives an error and softbricks my device. What am I doing wrong here?
(SM-N9000Q
Baseband: N9000QJVUDNB1)
Thanks
*Edit: Sorry about the typo, it's 4.4.2 not 4.2.2
Sent from my SM-N9000Q using Tapatalk
What rooting method did you use?
Why nobody has time to state relevant info when asking for help
I don't know, maybe the same reason why people have attitude when they clearly offer no help at all.
Anyhow, I did not specify it because I did not know there were several methods. I used Odin and CF-Auto for n900 devices. Is there a more reliable way to root Kitkat devices?
Sent from my SM-N9000Q using Tapatalk
Deleted
I'm sorry, everyone.
4.4.2*
Sent from my SM-N9000Q using Tapatalk
Murtilicious said:
I'm sorry, everyone.
4.4.2*
Sent from my SM-N9000Q using Tapatalk
Click to expand...
Click to collapse
Did you root your device as discribed here http://www.androidegis.com/how-to/root-samsung-galaxy-note-3-sm-n900-cf-auto-root-method/.
gee2012 said:
Did you root your device as discribed here http://www.androidegis.com/how-to/root-samsung-galaxy-note-3-sm-n900-cf-auto-root-method/.
Click to expand...
Click to collapse
I did exactly that with two different Odin versions. The installation got stuck at "cache.img" and failed both times. I used to have an SIII and I thought I knew my way around android and rooting, but apparently not. I'm completely lost here.
Sent from my SM-N9000Q using Tapatalk
Murtilicious said:
I did exactly that with two different Odin versions. The installation got stuck at "cache.img" and failed both times. I used to have an SIII and I thought I knew my way around android and rooting, but apparently not. I'm completely lost here.
Sent from my SM-N9000Q using Tapatalk
Click to expand...
Click to collapse
You could flash a custom recovery with Odin and then flash superSU.zip in that recovery, that would get you rooted too Link cwm recovery http://forum.xda-developers.com/showthread.php?t=2454079.
gee2012 said:
You could flash a custom recovery with Odin and then flash superSU.zip in that recovery, that would get you rooted too Link cwm recovery http://forum.xda-developers.com/showthread.php?t=2454079.
Click to expand...
Click to collapse
Thank you, sir. I'll do it as soon as I'm home and post the result.
Sent from my SM-N9000Q using Tapatalk
Murtilicious said:
Thank you, sir. I'll do it as soon as I'm home and post the result.
Sent from my SM-N9000Q using Tapatalk
Click to expand...
Click to collapse
Better check the CWM site i gave you before you start flashing if the N900Q is supported, i don`t see that specific model listed in there as it is listed for Turkey only. I see support for the N900S,T,W but not Q!
gee2012 said:
Better check the CWM site i gave you before you start flashing if the N900Q is supported, i don`t see that specific model listed in there as it is listed for Turkey only. I see support for the N900S,T,W but not Q!
Click to expand...
Click to collapse
They did not respond. This is frustrating. :/
Sent from my SM-N9000Q using Tapatalk
Hi All
I have rooted my note 3 with odin successfully, I was looking to install CWM but couldn't find the exact TAR file for the n9005 on lollipop 5.0.
I installed ROM manager which suggests there inst currently a compatible CWM I can use, the only device showing is hlte?
Does anyone have a link if one exists..
Thanks in advance.
viperuk said:
Hi All
I have rooted my note 3 with odin successfully, I was looking to install CWM but couldn't find the exact TAR file for the n9005 on lollipop 5.0.
I installed ROM manager which suggests there inst currently a compatible CWM I can use, the only device showing is hlte?
Does anyone have a link if one exists..
Thanks in advance.
Click to expand...
Click to collapse
Hlte is sm-n9005
Sent from my SM-N920C
Rosli59564 said:
Hlte is sm-n9005
Sent from my SM-N920C
Click to expand...
Click to collapse
Thank you !
Rosli59564 said:
Hlte is sm-n9005
Sent from my SM-N920C
Click to expand...
Click to collapse
Pretty sure hlte is supposed to work with N9005, N900A, N900T and N900P as well as N900W8. I think its unified for all snapdragon note 3s
I think your bootloader needs to be unlocked
Sent from my SAMSUNG-SM-N900A using Tapatalk
ahex1231 said:
I think your bootloader needs to be unlocked
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
You cannot / don't have to unlock a Samsung bootloader on SM-N9005. You use ODIN to flash the recovery and you are set. I would suggest this one btw. https://idlekernel.com/twrp/v6.6.5_2016_01_03/
That is incorrect it will fail when attempted
Sent from my SAMSUNG-SM-N900A using Tapatalk
It's absolutely correct and the way I did it! SM-N9005 is NO US Verizon crap phone, it's OPEN for ANY modification and just causes KNOX 0x1! IF it's no N9005, then you are absolutley right, there are some variants from ATT and Verizon which are locked and you have to verify that.
ahex1231 said:
That is incorrect it will fail when attempted
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
I am speaking from an n900a standpoint so I have to work around more...
Sent from my SAMSUNG-SM-N900A using Tapatalk
ahex1231 said:
I am speaking from an n900a standpoint so I have to work around more...
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
Yeah, thats why I corrected you, I saw your Tapatalk sig ^^ OK, things settled, back to topic ^^