Overview
Codename Lungo is a customized, aftermarket firmware distribution for several Android devices. Based on CyanogenMod, Codename Lungo is designed to increase battery life and size over Android-based ROMs released by vendors and carriers.
Features
Great Base
Lightweight & Fast
No Bloatware!
Longer Battery Life
Custom Launcher
Add-ons
Community Driven
And so much more...
Screenshots
Changelog
Credits and Acknowledgments
check the Codename Lungo website
Links & Other info
Kernel: Stock CyanogenMod
Documentation & F.A.Q
Add-ons
Facebook & Google+!
Codename Lungo is a Community driven ROM! So we now have a Facebook Group and a Google+ Page & Community
Here you can post mods, new ideas or just chat about the ROM!
Enjoy and JOIN! Facebook Page | Google+
Download ROM!
@ Codename Lungo Website
XDA:DevDB Information
Codename Lungo, ROM for the Oppo Find 5
Contributors
TimV_
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Stable Version: PA 4.6
Stable Release Date: 2015-01-15
Current Beta Version: CM11
Beta Release Date: 2014-11-17
Created 2014-03-09
Last Updated 2015-01-15
It's nice to see more and more ROMS coming out for this device.
Now, if only there is a overclockable kernel for cm 10.1... Hmmm..
anybody, anyone had tested this yet??
Regards...
ajestapaknaga said:
anybody, anyone had tested this yet??
Regards...
Click to expand...
Click to collapse
Sorry, I don't have the device but there should be no reason to not work.. Please feel fry to try. Report back any errors so they can be fixed
Which modem lungo uses 4.1 or 4.2?
Sent from my Oppo Find 5 using Tapatalk
dfvt said:
Which modem lungo uses 4.1 or 4.2?
Sent from my Oppo Find 5 using Tapatalk
Click to expand...
Click to collapse
Same as the original CM11
Tried this ROM out, but couldn't get passed the Welcome screen, kept crashing.
Sent from my Find 5 using Tapatalk
es10n said:
Tried this ROM out, but couldn't get passed the Welcome screen, kept crashing.
Sent from my Find 5 using Tapatalk
Click to expand...
Click to collapse
I had the same problem. Flash the zip after a clean install. Let it boot up properly, then restart it to recovery and flash gapps separately. Now you don't have to go through the welcome screen and it all works out nicely.
---------- Post added at 02:59 PM ---------- Previous post was at 02:53 PM ----------
I do really like this rom, light weight, low ram usage and the battery life is amazing. I havent tested the battery full yet but for 7 hours today it went down from 23% to 20% and this was playing music for 30min+ and sending a couple texts.
I would really like to see one improvement and, thats the new lockscreen notifications. The ones which come up on the right side of the lock screen. If this was present it would make the rom perfect for me.
Romaan said:
I had the same problem. Flash the zip after a clean install. Let it boot up properly, then restart it to recovery and flash gapps separately. Now you don't have to go through the welcome screen and it all works out nicely.
---------- Post added at 02:59 PM ---------- Previous post was at 02:53 PM ----------
I do really like this rom, light weight, low ram usage and the battery life is amazing. I havent tested the battery full yet but for 7 hours today it went down from 23% to 20% and this was playing music for 30min+ and sending a couple texts.
I would really like to see one improvement and, thats the new lockscreen notifications. The ones which come up on the right side of the lock screen. If this was present it would make the rom perfect for me.
Click to expand...
Click to collapse
Is this on the stock CM???? you can try this: http://www.androidbeat.com/2014/01/get-notifications-lock-screen-android-device-like-ios/
TimV_ said:
Is this on the stock CM???? you can try this: http://www.androidbeat.com/2014/01/get-notifications-lock-screen-android-device-like-ios/
Click to expand...
Click to collapse
Ye I am using this but I still prefer the notifications present on the PacMan Rom, but as a substitute this is very good, thanks
Can I use faux kernel (find5-kk-kernel-006u.zip) in this rom? the kernel is supposed to be compatible with CM11.
me0wth said:
Can I use faux kernel (find5-kk-kernel-006u.zip) in this rom? the kernel is supposed to be compatible with CM11.
Click to expand...
Click to collapse
YES
Cool! Thanks!
The other thing is that I tried to flash add-ons (Sound recorder, CM file manager and Tourch) but they have not been installed at all, there were no shortcuts in app menu nor they could be found in /system/app folder although installation process completed successfully.
So I simply unziped them and copied apk to /system/app then rebooted the phone and they seem to be installed properly after that...except torch. File manager and sound recorder works fine, but torch did not activate the flash LED and crashed with some error.
I used latest version of TWRP, could that be the case? However I used it to flash the ROM and gapps as well, no problem there at all.
me0wth said:
Cool! Thanks!
The other thing is that I tried to flash add-ons (Sound recorder, CM file manager and Tourch) but they have not been installed at all, there were no shortcuts in app menu nor they could be found in /system/app folder although installation process completed successfully.
So I simply unziped them and copied apk to /system/app then rebooted the phone and they seem to be installed properly after that...except torch. File manager and sound recorder works fine, but torch did not activate the flash LED and crashed with some error.
I used latest version of TWRP, could that be the case? However I used it to flash the ROM and gapps as well, no problem there at all.
Click to expand...
Click to collapse
There are coming new add-ons en RO<S as soon I am Done moving
Sweet! I really like this ROM, literally have no bug at all on my phone comparable to Omni and Color OS 1.0.9 I've tried before plus it gives me better battery life!
Related
Warning! Before installation please read Installation method from downside. To install any custom ROM 4.1+ you need official JB from Samsung before and make CWM Recovery. If you have already custom ROM, just read installation process.
Member, i dont have this phone so, ROM may have some little bugs
LiquidSmooth 4.3.1 moved from GT-I8160. All credits goes to shine911, TeamCanjica and
New Macław.
Bugs founded:
- none
Changelog [21/01/2014]:
- much more stable and smoothly like never before, must try
- updated RIL class path for stable network signal without any toggles (2G/3G/2G+3G) problems, thanks to New Macław
- more accurated auto brightness
- all Reboots ways working correctly
- reverted better Gallery/Camera app from 4.2
Screenshots, looks the same here
http://forum.xda-developers.com/showthread.php?t=2319409
Extra info:
• Gapps in slim version here
Gapps in full version here
Click to expand...
Click to collapse
Installation method:
• download ROM and save on your external/internal SD
• go to Recovery and make Backup of current ROM in Backup and Restore option
• if you move up from:
a) previous version of this ROM do Wipe cache and Dalvik-cache
b) others 4.3 do the same, but if you see any bugs after boot, do Wipe data
c) any others android version do Wipe data
• choose install zip from and select ROM, wait for completed installation
• you can flash now Gapps package
• now set reboot system now option and wait to system boot up
• done
Click to expand...
Click to collapse
Download ROM:
https://docs.google.com/file/d/0B7hlS8uionOjN1Zackhua3FjeGM/edit?usp=docslist_api
MD5 (check original package size)
41e6bb2c8a3bb02bc26d6934ac24af8f
Click to expand...
Click to collapse
Addons*:
*Always flash it via install zip from sdcard in Recovery
Click to expand...
Click to collapse
• force disable softkeys backlights and BLN
Wylaczenie_podswietlenia
Credits to:
shine911 | TeamCanjica | Android Does | New Macław | LiquidSmooth Team | Cyanogen | Google | jihaad
Review
So firstly thank you @PolishVodka for your efforts for our phone.
My phone: Samsung Galaxy S Advance i9070, LiquidSmooth 4.3.1
This is my first review:
Good:
Very smooth, fast and stable
Camera is working fine
Features of Liquid Smooth are awesome
WiFi working, Data working, Bluetooth working
No income call bug
Free ram is ok
With Poweramp music player no problem with bypassed music
Not so good:
Mobil Data live Tile isn't working
I will test the battery life more but it's not the best.
Battery: (testing)
Is this rom based on CM10.2?
dimitris99 said:
Is this rom based on CM10.2?
Click to expand...
Click to collapse
Yes..
@PolishVodka Thanks for port !
will try it tomorrow
Will try it tommorow :3
Thanks a lot, I've been waiting for so long for this rom!
Anyway, where do I check this MD5,
MD5 (check original package size)
83767464644cfe2da4daf1102e14fce6
?
Download the ROM. Get a MD5 checker, and run the rom file through the MD5 checker. If the file downloaded is not corrupt, then its MD5 sum should match the one provided by the dev.
juanchotazo99 said:
Download the ROM. Get a MD5 checker, and run the rom file through the MD5 checker. If the file downloaded is not corrupt, then its MD5 sum should match the one provided by the dev.
Click to expand...
Click to collapse
if u flashing it over CM 11 it wont flash .
u need to install stock by odin thin flash this
Irrelevant. Post above mine was asking about how to check the MD5 sum in the first post.
This rom is sources built right?what about the kernel compilation? Using gcc or linaro?
Sent from my GT-I9070 using xda premium
Did anyone tried this? Is it really faster than CM10.2?
regisknechtel said:
Did anyone tried this? Is it really faster than CM10.2?
Click to expand...
Click to collapse
I tried it..
Its great..
Found no major bugs.
Just a bug that active display was not working, thats it!!
@PolishVodka correct me if I'm wrong, but are publishing "WinZip ROM" in original android development?!?! Or are they source built?
Sent from Italy using Tapatalk
Now this device have great future with all these great developers
Thanx for this ROM
But want cm11 based ROM will you carrybit?
Sent from my GT-I9070 using xda premium
I saw a video on YouTube: Liquid Smooth ROM Running on the Salmsung Galaxy S4.. It looked really awesome..
Downloading it for our device now.. Thanks a lot man!
Downloading now.. Will review today and post tomorrow..
BTW thank you for another two 4.3 ROM's from you
:good::good::good:
---------- Post added at 10:41 AM ---------- Previous post was at 09:53 AM ----------
Just now installed the ROM...
Its really amazing ROM.. This kind of ROM I was looking for.. Thank you very much @PolishVodka for this ROM
ROM is super smooth,
Bugs: Not find any bug as of now.. If I find any bugs I will post
Nice features and ROM is fast and flying
:victory::victory::victory::good::good::good::good:
---------- Post added at 11:16 AM ---------- Previous post was at 10:41 AM ----------
dagger said:
I tried it..
Its great..
Found no major bugs.
Just a bug that active display was not working, thats it!!
Click to expand...
Click to collapse
Active display is also working..
:good:
Mankala said:
Active display is also working..
:good:
Click to expand...
Click to collapse
Really!!!
Strange, dosn't works for me..
i will try again..
The rom is really awesome, it's super duper smooth and everything(I'm almost in love with it ). Only one bug I have found, tell me if you also are heading this problem guyz. I can't turn on auto screen brighteness, I have to set it manually always?
i have a bug , its not major but important to me ,
BBM Notafication sound not working , its annoying really annoying
its a bug on most CM 10.2 Based roms , if not all of it
Logcat attached
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
-----------------------------------------------------------------------------------------------------------------
This project no longer updated because I sold this device. Thanks for following my projects :good:
-----------------------------------------------------------------------------------------------------------------
Introduction
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
NOTE: This is a cooked ROM.
Click to expand...
Click to collapse
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Click to expand...
Click to collapse
Features
It's a standard CyanogenMod 12.1 porting plus this:
New and better kernel by Bule (really thanks for this).
Viper4 preinstalled.
Better modem for battery save.
Other small features not need to be listed.
GoogleApps preinstalled.
One Plus Camera app with slowmotion.
Sony music effects and music app.
Kernel is underclocked as default.
.
Click to expand...
Click to collapse
Installation instructions
Download the ROM into internal/external SD.
Create a backup with TWRP if need.
Factory Reset via TWRP.
Flash it via TWRP.
If you receive the error in the TWRP "mount: failed to mount /dev/block/platform/mtk-msdc.0/..." flash the rom again.
Wipe dalvik-cache and cache via TWRP.
Reboot and waiting to complete the ROM installation.
Click to expand...
Click to collapse
Update instructions
Download the ROM into internal/external SD.
Create a backup with TWRP for security.
Flash it via TWRP.
If you receive the error in the TWRP "mount: failed to mount /dev/block/platform/mtk-msdc.0/..." flash the rom again.
Wipe dalvik-cache and cache via TWRP.
Reboot and waiting to complete the ROM update.
Click to expand...
Click to collapse
Xposed installation
For Xposed installation follow this thread and install the arm64-sdk22 version.
Click to expand...
Click to collapse
Know bugs
Notifications LED: working fine with some colors, red | green | cyano | pink | orange | white but the cm color selection go crazy sometimes, we working to fix this, but the notifications now working fine.
Engineering mode not working (in this moment into no one CM working).
FM Radio module not working.
Click to expand...
Click to collapse
Change log
Code:
Build 1.3 - 2016/01/07
[changed] Open camera instead of the boring camera m Thanks to @coremania for the info of this wonderful app
[new] New CM build
[fixed] New safety patch Thanks to @coremania for the info
[changed] Kernel is underclocked by default
[new] Multi-Sim Toggle app added for battery saving if you only use one sim. It also fixes Skype from crashing. Thanks to xenon92 (xda) for this app!
[fixed] New dialer cause (Next dialer) Its easier for future updates of CM builds
[fixed] Some more updates of CM apps
Code:
Build 1.2 - 2016/01/06
[new] One Plus Camera app with slowmotion support
[new] Modded Qickpick Gallery app
[new] Sony music effects and music app ported to this ROM. (Viper4Android R.I.P)
[changed] Kernel is underclocked as default
[changed] Multi-Sim Toggle app added for battery saving if you only use one sim
[fixed] Call rec function fix thanks to @Sprusmus
Code:
Build 1.1 2016/01/04
[changed] New libs
[changed] faster and more fluid system handling
Code:
Build 1.0
[changed] New kernel and framework Thanks to Bule :)
[changed] Latest modem
[new] New CM Build 2016/01/03
[fixed] Multi-Sim Toggle app added for battery saving if you only use one sim.
[new] Gapps pre installed
Code:
Build 99 - 2016/01/01
[changed] Revert to old camera app.
[changed] New and better camera libs.
[new] Multi-Sim Toggle app added for battery saving if you only use one sim.
[fixed] USB to PC MAC fix.
Code:
Build 98 - 2015.12.31
[fixed] Audio recording fix.
Code:
Build 95 - 2015.12.30
[new] Gapps removed for follow the CM standard.
[changed] Phone led fix (we need some testing).
[fixed] Screencast fix.
Code:
Build 45 - 2015.12.28
[changed] Gapps updated.
[new] Next Camera added (Dont push the effect button).
[fixed] Google Now mic now working.
[note] Some cleanups in the ROM.
Code:
Build 20 - 2015.12.24
[fixed] Viper4 Android fix.
[fixed] Write to External SD fix.
[changed] ROM Updated to latest build 2015/12/24.
[new] New and better kernel!! Thanks to Bule fore his kernel.
[note] Battery friendly and snappier UI.
[changed] Best Modem for battery saving.
[new] Viper4 android pre installed.
[changed] Small Gapps pre installed Fixed in build 15.
[changed] Xposed frame work deleted.
[changed] Xperia keyboard deleted.
[new] New Framework.
Click to expand...
Click to collapse
Downloads
External Download (sorry but I can't upload every build): http://www.needrom.com/download/cyanogenmod-3/
Click to expand...
Click to collapse
Important notes
This ROM is based on Bule Version with plus features get from other CyanogenMod available for our device. The most important in this ROM is stability with velocity. If you wanna try this ROM remember this is a testing ROM and all times we working for give the best experience with this ROM and device. If you have a problem you can write here or into the official site (I suggest to talking here because into XDA we have the best developers in the android ecosystem).
Click to expand...
Click to collapse
XDA:DevDB Information
[ROM][BUILD 1.3 - 2016/01/07] CyanogenMod 12.1 - Daniel101 MOD, ROM for the Redmi Note 2
Contributors
Namaless, daniel101
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: No Longer Updated
Current Stable Version: Build 1.3
Stable Release Date: 2016-01-07
Created 2015-12-28
Last Updated 2016-02-01
Reserved
Downloading thanks. Pretty nice to see cm builds coming up.
Sent from my Redmi Note 2 using Tapatalk
Please upload somewhere we don't have to register or login
syl0n said:
Please upload somewhere we don't have to register or login
Click to expand...
Click to collapse
I can ask to the developer, give me time to get an answer
Thanks, does 4G works on both SIM's?
Hi there, just a small issue with the rom is that the notification light customisation doesnt work. Is this happening to anyone else.
Any info about new bule's kernel?
~ Xiaomi Redmi Note 2 Prime ~
thehobit said:
Thanks, does 4G works on both SIM's?
Click to expand...
Click to collapse
I don't know because i don't have any 4g SIM.
r.king35 said:
Hi there, just a small issue with the rom is that the notification light customisation doesnt work. Is this happening to anyone else.
Click to expand...
Click to collapse
What problemi you have? Forma me the only issue is blues led color missing.
SkiFire13 said:
Any info about new bule's kernel?
~ Xiaomi Redmi Note 2 Prime ~
Click to expand...
Click to collapse
Forma a moment i don't have any news.
Any solution for mtk engineering mode? not working on this build.
Sent from my Redmi Note 2 using Tapatalk
I installed this rom and Skype crashes each time i try to make a video call.
Any solution?
Is this another bule's rom based with a few modifications or mods installed right?
(just for whether installing or not because it might behave very similar to bule's 11 build which is my rom at this moment xD)
Sent from my Redmi Note 2 using Tapatalk
ozkaya84 said:
Any solution for mtk engineering mode? not working on this build.
Sent from my Redmi Note 2 using Tapatalk
Click to expand...
Click to collapse
For a moment we don't have any solution (every cm don't working engi app).
giorgoslouk said:
I installed this rom and Skype crashes each time i try to make a video call.
Any solution?
Click to expand...
Click to collapse
Tomorrow install skype and testing, thanks for report the bug
Javi22 said:
Is this another bule's rom based with a few modifications or mods installed right?
(just for whether installing or not because it might behave very similar to bule's 11 build which is my rom at this moment xD)
Sent from my Redmi Note 2 using Tapatalk
Click to expand...
Click to collapse
No, It's a compiled version, we use only the bule's kernel. You can easy backup your phone and try this, btw if you want you can waiting, we working on build 50 with small fixes, I have over 10 backups with all roms available in this moment for this phone xD
P.S. I talking with daniel and with the build 50 releasing we upload directly here on xda for leave the ppl to register on the download site, sorry for inconvenience..
Namaless said:
I don't know because i don't have any 4g SIM.
What problemi you have? Forma me the only issue is blues led color missing.
Forma a moment i don't have any news.
Click to expand...
Click to collapse
Yes i have the issue with blue light as well it doesnt work please could you find fix and update rom accordingly.
thanks
r.king35 said:
Yes i have the issue with blue light as well it doesnt work please could you find fix and update rom accordingly.
thanks
Click to expand...
Click to collapse
I working on it, I checked the lights source and I think is correct, I need to debug much more.
hello guys, glad you have created a thread on xda .
Needrom is not so popular.
Has this Rom FM Radio or can we use Spirit FM?
Gesendet von meinem Redmi Note 2 mit Tapatalk
tau.gi.mo said:
Has this Rom FM Radio or can we use Spirit FM?
Gesendet von meinem Redmi Note 2 mit Tapatalk
Click to expand...
Click to collapse
I have tried now with Sprint2 FM OpenSource version and the API can't connect with the kernel, so this not working.
We need to working aswell to this, but for a moment we use our time to other fixes.
Btw thanks for send this issue, I posted on my todolist
What is engi? Engineering mode?
It does work on aosp mode by vova.
https://yadi.sk/d/_WxM8YOCmC2jd
Does alarm clock works while phone is off?
Recommending 48th modem.
Regards.
Sent from my Redmi Note 2
cukierkas said:
What is engi? Engineering mode?
It does work on aosp mode by vova.
https://yadi.sk/d/_WxM8YOCmC2jd
Does alarm clock works while phone is off?
Recommending 48th modem.
Regards.
Sent from my Redmi Note 2
Click to expand...
Click to collapse
I talking with Daniel101 and him not compiled from sources but it's a cooked rom, so I will try to compile from sources after cm repo is downloaded (i think tomorrow).
For the modem you can link the version and/or where I can found? Please link in pm or here the post for this aosp rom
The alarm when the phone is off I not tried, I can try now, give few minutes and reply here
NeedROM ppl found a problem with whatapp voice message, I added for now here.
cukierkas said:
hello guys, glad you have created a thread on xda .
Needrom is not so popular.
Click to expand...
Click to collapse
I don't understand the problem for other ppl to use xda for development our roms.. I like this place, I shared all times my knowedge here and supported sometimes, btw Ill continue with my project and I leave all cooked roms and working with a compiled version, stay tuned (I think to collaborate if him want with loki, it's a good basework and him share the source code aswell).
Just another CyanogenMod rom – but odexed
This build of CM 13 for the OnePlus 3 is made with the sources of CyanogenMod
Special Features are:
Odexed
Navigation Bar always enabled like on Nexus devices
Home button enabled as well
Faster GPS fix
Changelog
Check on https://www.cmxlog.com/13/oneplus3/ for the latest changes
Installation instructions:
Download the latest build
https://www.androidfilehost.com/?w=files&flid=86101
Download Gapps
Take a nandroid backup
Recommended - Full wipe and factory reset
Flash ROM using latest Recovery
Flash Gapps
Reboot.
Enjoy!
* Note:
Don’t reboot in between flashing rom and Gapps
SuperSu is supported as well but is not needed
All credits belong to
CyanogenMod team
@Grarak, @dianlujitao
XDAevDB Information
CyanogenMod OnePlus 3, ROM for the OnePlus 3, Odexed
Sources
https://github.com/CyanogenMod
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: Unlocked bootloader, custom recovery
Version Information
Status: Nightly
Created 2016-07-28
Last Updated 2016-07-28
First of all, I’m not a developer and cannot really fix things. My work depends on the real CyanogenMod developers. I run builds on my build host because I like to have Android being Odexed like all stock roms are.
If we’re talking about the odex files, here are its advantages when compared to the deodex files.
• In case of odex files, apps start a lot faster since the preloading information is separately available to load directly to the Dalvik virtual machine. Where as in deodexed files, the boot times are significantly longer as the DVM has to decompile APKs at boot time to get the necessary information.
• The odexed APKs occupy less space when compared to the deodexed APKs, so they occupy less room in the system folder.
These builds will not be on a daily schedule but a few times a week. If you like my work please press thanks on the button beneath.
Latest build of today
cm-13.0-20160730-UNOFFICIAL-oneplus3.zip
From now on the files can be downloaded on Androidfilehost
https://www.androidfilehost.com/?w=files&flid=86101
Have fun
is it still possible to disable navbar? thanks
nadejo said:
is it still possible to disable navbar? thanks
Click to expand...
Click to collapse
That is possible, but you have to do that in the build.prop and the synaptics.kl files if necessary.
Thanks @Planet X good work!
Todays nightly is up on Androidfilehost.
https://www.androidfilehost.com/?fid=24591000424950852
There has been a lot of changes like DASH charging has been added and also the camera should work better now. You will find all the changes here https://www.cmxlog.com/13/oneplus3/
Let's find it out?
Thats what I have found so far:
DASH working !
DASH is working perfectly except for those of us who would like that "DASH charging" text and blue notification light.
- Gallery crash couple seconds after viewing recently taken image. Crashes hard triggering automatic reboot of the device.
- Cannot transfer files from/to PC through USB
Fix is:
Edit build.prop and remove ro.sdcardfs.enabled=true
Everything will work as usual.
New Build is up!
cm-13.0-20160730-UNOFFICIAL-oneplus3.zip
https://www.androidfilehost.com/?fid=24659325368664127
This includes the fix for File transfer to PC and tweaks for the camera.
Have fun
Which camera tweaks?
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Steve has unmerged changes on Gerrit. I have merged that.
New Build is up!
cm-13.0-20160730-UNOFFICIAL-oneplus3.zip
https://www.androidfilehost.com/?fid=24659351692116054
It has the same date. I have deleted the earlier build.
There has been a lot of changes to the camera in the meanwhile today. My first experience is that even Snap is a good camera now. The flash works finally as it should and also noise seems to be reduced. After all, I 'm finally convinced that cm13 is capable of taking pictures in house and can be used for daily shots on my upcoming vacation too.
Enjoy the new build. Have fun
New Build is up!
cm-13.0-20160731-UNOFFICIAL-oneplus3.zip
https://www.androidfilehost.com/?fid=24659325368664296
Again with changes to the camera. Enjoy the new build
P.S: I was to early to submit. The upload took longer than expected.
Planet X said:
New Build is up!
cm-13.0-20160731-UNOFFICIAL-oneplus3.zip
Again with changes to the camera. Enjoy the new build
Click to expand...
Click to collapse
Hi Mister, link is missing for the other people
New Build is up!
cm-13.0-20160801-UNOFFICIAL-oneplus3.zip
https://www.androidfilehost.com/?fid=24659325368664383
Again camera fixes and outdoor overlay fixes.
Have fun
New Build is up!
cm-13.0-20160802-UNOFFICIAL-oneplus3.zip
https://www.androidfilehost.com/?fid=24659325368664512
With all the changes up to 18:00 CEST.
Have fun
I'm a bit concerned about the added feature blur on the lockscreen. Personally I like it more the way we had it before. What do you think about it? Should I remove it in my builds?
Planet X said:
I'm a bit concerned about the added feature blur on the lockscreen. Personally I like it more the way we had it before. What do you think about it? Should I remove it in my builds?
Click to expand...
Click to collapse
Personally, I like that feature
Sent from my ONEPLUS A3000 using Tapatalk
g_Four said:
Personally, I like that feature
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
Than I leave it as it is for now.
New build is up again.
cm-13.0-20160803-UNOFFICIAL-oneplus3.zip
https://www.androidfilehost.com/?fid=24665539028713513
This time with a lot of fixes and changes. Mainly the Them engine has been updated and we are updated to Android 6.0.1 Release 61 (MOB30Z).
It's a clean build again.
Have fun
Planet X said:
Than I leave it as it is for now.
New build is up again.
cm-13.0-20160803-UNOFFICIAL-oneplus3.zip
https://www.androidfilehost.com/?fid=24665539028713513
This time with a lot of fixes and changes. Mainly the Them engine has been updated and we are updated to Android 6.0.1 Release 61 (MOB30Z).
It's a clean build again.
Have fun
Click to expand...
Click to collapse
Thanks for update..
How about bug in gallery?
Sent from my ONEPLUS A3000 using Tapatalk
g_Four said:
Thanks for update..
How about bug in gallery?
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
As I use from time to time MTP for filetransfer between PC and Phone I have decided to disable sdcardfs in the sources until everything is fixed.
So we don't have that bug. You could still enable it in build.prop file if you like that.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 7.0 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
CREDITS to OPO devs " Wu Lin " , this is a first build of Cm14
Version Information
Status: Beta
new link - 15-9-16..
https://drive.google.com/file/d/0B5pZx0fwHoYFUmdUbmR5R3c5WlE/view
How to Flash :-
* Download this Rom
* Boot Into recovery (TWRP recommended)
* Wipe ur system, cache, dalvik cache and User Data.
* Just flash This Rom & Gapps...
* Reboot into system..!
* Profit.. Enjoy..!
Original link -
https://pan.baidu.com/wap/link?uk=1.../第三方ROM/OnePlus One/CM14.0-OnePlus-One&page=1
System Tunner for 5-9-16 build....
https://drive.google.com/file/d/0B0xYAxRQ4baja2xEdXBTV0NMUWM/view?usp=drivesdk
Give please new link for download build.
Thank you in advance!
Says file doesn't exist
Sent from my A0001 using XDA-Developers mobile app
what is different to the experimental N build?
Any new settings?
https://drive.google.com/file/d/0B7NbysAHu42ZTnNGRlFlaU1HVWc/view
I tried a dirty flash it, GApps and supersu 2.77 systemless on experimental AOSP 0906 and has boot, unfortunately soon after son went to work so I could not test anything ...
In the details of the files on Google Drive is listed as owner a Russian name ... Other indications do not know to ...
surferbyter said:
https://drive.google.com/file/d/0B7NbysAHu42ZTnNGRlFlaU1HVWc/view
I tried a dirty flash it, GApps and supersu 2.77 systemless on experimental AOSP 0906 and has boot, unfortunately soon after son went to work so I could not test anything ...
In the details of the files on Google Drive is listed as owner a Russian name ... Other indications do not know to ...
Click to expand...
Click to collapse
don't dirty flash on aosp 7.. install clean os..
okay so i just booted it and heres the changes from AOSP build
Gello
AudioFX
File explorer
Screen Recorder
Sound recorder are included
The webview starter and ancient search app are removed.
There are a lot of place holders for things that one work
(IE gestures that aren't Double tap 2 wake, theres an O click option which i've never seen)
theres an additional buttons option too that doesn't do anything
root is built in developer settings
Screen is calibrated a little more pink than AOSP
Permissions seem to be fixed
-Google play services isn't crashing
-contacts and calendar sync without issue
sorry if this is a bit ranty, i'm just sifting through everything now
A$h!$h said:
don't dirty flash on aosp 7.. install clean os..
Click to expand...
Click to collapse
It is my intention to do so as soon as I have a bit 'of time ... The Dirty flash was only a first quick test ...
Thanks for sharing
thoughtlesskyle said:
okay so i just booted it and heres the changes from AOSP build
Gello
AudioFX
File explorer
Screen Recorder
Sound recorder are included
The webview starter and ancient search app are removed.
There are a lot of place holders for things that one work
(IE gestures that aren't Double tap 2 wake, theres an O click option which i've never seen)
theres an additional buttons option too that doesn't do anything
root is built in developer settings
Screen is calibrated a little more pink than AOSP
Permissions seem to be fixed
-Google play services isn't crashing
-contacts and calendar sync without issue
sorry if this is a bit ranty, i'm just sifting through everything now
Click to expand...
Click to collapse
I tried a build this morning from another place I can't remember and I couldn't change the pinkish look
Sent from my A0001 using XDA-Developers mobile app
suaverc118 said:
I tried a build this morning from another place I can't remember and I couldn't change the pinkish look
Sent from my A0001 using XDA-Developers mobile app
Click to expand...
Click to collapse
I didn't find a way to do so either
Sent from my Nexus 6P using Tapatalk
First impression
Hello guys, I installed the rom tonight (clean). No "pinkish look" for me.
I tested it now abut two hours and I´m surprised how stable the rom actually is!
No reboot, no troubles at all.
Installed all the apps I need, and again no problems. Perfect WiFi, best data connecion and extrem fluid.
If we would get a few features more... would say perfect. M deepest respect to the developers and for this early and quick build :fingers-crossed::fingers-crossed::fingers-crossed:
Greets, reinipic
---------- Post added at 22:59 ---------- Previous post was at 22:55 ----------
iRhyiku said:
what is different to the experimental N build?
Any new settings?
Click to expand...
Click to collapse
Hi, experimental build is AOSP rom, this rom is cyangenmod.
Greets, reinipic
---------- Post added at 23:06 ---------- Previous post was at 22:59 ----------
suaverc118 said:
I tried a build this morning from another place I can't remember and I couldn't change the pinkish look
Sent from my A0001 using XDA-Developers mobile app
Click to expand...
Click to collapse
Hello, when you mean the wallpaper, go to backgrounds and choose no wallpaper. Otherwise install some you want.
It´s too soon to expect everything and a bit more.
Greets, reinipic
reinipic said:
Hello guys, I installed the rom tonight (clean). No "pinkish look" for me.
I tested it now abut two hours and I´m surprised how stable the rom actually is!
No reboot, no troubles at all.
Installed all the apps I need, and again no problems. Perfect WiFi, best data connecion and extrem fluid.
If we would get a few features more... would say perfect. M deepest respect to the developers and for this early and quick build :fingers-crossed::fingers-crossed::fingers-crossed:
Greets, reinipic
---------- Post added at 22:59 ---------- Previous post was at 22:55 ----------
Hi, experimental build is AOSP rom, this rom is cyangenmod.
Greets, reinipic
---------- Post added at 23:06 ---------- Previous post was at 22:59 ----------
Hello, when you mean the wallpaper, go to backgrounds and choose no wallpaper. Otherwise install some you want.
It´s too soon to expect everything and a bit more.
Greets, reinipic
Click to expand...
Click to collapse
My overall white parts of the letters or photos had a pinkish tint... I wonder of it was because I flashed a custom kernel or used a profile from it???
Sent from my A0001 using XDA-Developers mobile app
Hohoho, don't flash a custom kernel at this time. I think it is to soon. In those early state of developement we should use the stock kernel. How I sayd, no such issues after a clean flash.
Greets, reinipic
I too am experiencing the pinkish hue. Also, when I try to activate Now on Tap the system UI crashes. Otherwise, the ROM is very smooth so far. Very impressed with this early build.
Can someone give another link to download. Gdrive link not working
Sent from my A0001 using Tapatalk
bidi1234 said:
Can someone give another link to download. Gdrive link not working
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Here mate : direct download link
suaverc118 said:
My overall white parts of the letters or photos had a pinkish tint... I wonder of it was because I flashed a custom kernel or used a profile from it???
Sent from my A0001 using XDA-Developers mobile app
Click to expand...
Click to collapse
i had the pink tint on stock so no it's the color calibration vs a kernel thing
Been using this build for a few hours. Love how smooth it is and I have experienced very few bugs. I did have an issue with the Bluetooth. Went to connect my jaybird BlueBuds and they connected fine. However, when I attempted to stream through Spotify the audio wouldn't play through the BlueBuds. It came out of the speakers. Has anyone experienced this bug?
So the Pinkish thing is something were working on, at least I'm looking into it tonight as well as some other bugs, now on tao with HW keys will crash sys UI AND hw encoding hasn't worked for me so videos can't really be recorded. The CPU temp is fixed in this build and I'd refrain from Outside kernels for noe because I've experienced some issues. Might be my kernels but I'm not sure. I'm working too see if I can get more settings opened up since most CM settings are greyed out for coding reasons. not done yet, please inform me of any other bugs I will address with the others soon
Sent from my A0001 using Tapatalk
Good evening everyone, I come to share with you this ROM which is still developed for our old but still functional Mi2/s.
I find it indeed surprising that nobody talks about it ... Especially that a version on Android 9 is fully supported.
I installed it for a while and everything works correctly even the GAPPS!
I do not prefer to put links to respect the developers, but if they come forward, it is with pleasure that I would put them following this subject.
So try Mokee!
hi, i tried 10 but didn't try 9.0..
10 has a camera problem; you get images 90 degree rotated.. didn't dig it too much and don't know if there is a solution..
instead installed flyme 6.x based on android 7.
it's flawless and much faster than miui..
but i may try mokee 9 someday soon..
thanks a lot.
endia said:
hi, i tried 10 but didn't try 9.0..
10 has a camera problem; you get images 90 degree rotated.. didn't dig it too much and don't know if there is a solution..
instead installed flyme 6.x based on android 7.
it's flawless and much faster than miui..
but i may try mokee 9 someday soon..
thanks a lot.
Click to expand...
Click to collapse
Yes Mokee 10 is out there is really not a long time and is therefore experimental version for the moment.
But against the latest versions of Final Mokee 9 are really stable and fast.
Keep me posted when you try it on the Flyme 6.x rom
stradfred said:
Yes Mokee 10 is out there is really not a long time and is therefore experimental version for the moment.
But against the latest versions of Final Mokee 9 are really stable and fast.
Keep me posted when you try it on the Flyme 6.x rom
Click to expand...
Click to collapse
Mokee 9 is stable and fast but there is battery drain.I've been using 9 a few months and finally i decided to go back to miui pro, a version i found on 4pda.Not so fast and old version of android (5) but at least i don't have to worry about battery.
stradfred said:
Yes Mokee 10 is out there is really not a long time and is therefore experimental version for the moment.
But against the latest versions of Final Mokee 9 are really stable and fast.
Keep me posted when you try it on the Flyme 6.x rom
Click to expand...
Click to collapse
finally tried it for a couple of days:
very smooth and complete rom but somewhat slow comparing to mokee 10 and the other roms..
there is a delay for a moment while opening, closing apps and between screen transltlons.
to be confirm, installed again (unceomplete) mokee 10 and difference is obvious to me on my mi2s..
hope they release a final version for 10 too..
---------- Post added at 07:49 PM ---------- Previous post was at 07:46 PM ----------
T3sla said:
Mokee 9 is stable and fast but there is battery drain.I've been using 9 a few months and finally i decided to go back to miui pro, a version i found on 4pda.Not so fast and old version of android (5) but at least i don't have to worry about battery.
Click to expand...
Click to collapse
i can confirm that battery drain is much faster than miui pro and flyme..
I also just tested the Miui Pro v9.2.3.0 and Flyme 6.8.3.17R ROMs.
Miui Pro:
The applications are launched generally quite quickly and the battery and indeed optimized.
The shortcomings are the absence of languages (no French for my part) and the dated aspect of the UI.
Flyme:
I like the interface of flyme that I know (I have a pro 5), on the other hand with this version, impossible to have the GAPPS of functional (Google install via Meizu AppStore).
Finally, I'm back to Mokee 9 waiting to install Gapps on Mokee 10...
I'm so glad with Mokee 9 also.
On the other hand I don't know how to use root with addonsu-installer-MK90.0-arm-signed.zip, I installed it but I cannot see any change.
aleixsr said:
I'm so glad with Mokee 9 also.
On the other hand I don't know how to use root with addonsu-installer-MK90.0-arm-signed.zip, I installed it but I cannot see any change.
Click to expand...
Click to collapse
Flash Magisk 20.3 with TWRP, is work well
I tried it and I got a boot loop. Is addonsu-installer-MK90.0-arm-signed.zip needed to use Magisk?
aleixsr said:
I tried it and I got a boot loop. Is addonsu-installer-MK90.0-arm-signed.zip needed to use Magisk?
Click to expand...
Click to collapse
Flash Mokee 9 and boot on system, after configure Mokee reboot recovery and Flash Opengapps (if you want google apps) and Magisk, done.
Where can I download the ROM of Android 10?
aleixsr said:
I tried it and I got a boot loop. Is addonsu-installer-MK90.0-arm-signed.zip needed to use Magisk?
Click to expand...
Click to collapse
I have got the link of Mokee! I'll try it.
stradfred said:
I installed it for a while and everything works correctly even the GAPPS!
So try Mokee!
Click to expand...
Click to collapse
How do you got GAPPS working on MK10 ?
King-Ossy said:
How do you got GAPPS working on MK10 ?
Click to expand...
Click to collapse
Not for the moment, this is why I stayed on Mokee 9
Hi all,
I have also just installed HavocOS 3.2 on our Aries device and it works like a charm (Android 10).
Few days ago they also published on sourceforge the official 3.3 , but it crashes to me during first boot.
I had to tweak a bit the gapps-config file to be able to install gapps due to the limited space.
It's indeed awesome that we can still play with such old metal and bleeding edge software! ?
Gollum
Hi Gollum,
Do you have a link for this HavocOS ROM?
Camera, FM is supported?
stradfred said:
Hi Gollum,
Do you have a link for this HavocOS ROM?
Camera, FM is supported?
Click to expand...
Click to collapse
+1
---------- Post added at 10:25 PM ---------- Previous post was at 10:07 PM ----------
found..
https://sourceforge.net/projects/havoc-os/files/aries/
stradfred said:
Hi Gollum,
Do you have a link for this HavocOS ROM?
Camera, FM is supported?
Click to expand...
Click to collapse
Camera works, not sure Radio FM as I haven't tried, but FM app is there. I will try and let you know.
Yes, the link is the one shared in the post before this
https://sourceforge.net/projects/havoc-os/files/aries/
Gollum
gollum82 said:
Camera works, not sure Radio FM as I haven't tried, but FM app is there. I will try and let you know.
Yes, the link is the one shared in the post before this
https://sourceforge.net/projects/havoc-os/files/aries/
Gollum
Click to expand...
Click to collapse
How about battery?On mokee there is battery drain.
gollum82 said:
Few days ago they also published on sourceforge the official 3.3 , but it crashes to me during first boot.
Click to expand...
Click to collapse
Only Havoc-OS-v3.2-20200215-aries-Official.zip work for me
gollum82 said:
I had to tweak a bit the gapps-config file to be able to install gapps due to the limited space.
Click to expand...
Click to collapse
Possible to share your gapps-config file? I tryed this but don't work
GoogleTTS
PackageInstallerGoogle
DialerFramework
SetupWizard
Override
Click to expand...
Click to collapse
Thank you!