Hi, is there any chance to add Volume - and + beside the home buttons?
Sorry but i cant post external links to show yous exactly what im looking for.
Every android pc have volume control in menu bar and i will like to have it in my Tab 2.
My rom is: Android 4.2.2 - CyanogenMod 10.1.3
Related
Disclaimer: I am not responsible for what YOU do to your tablet...
You assume all responsibility and risk associated with flashing any ROM. Make a backup!!!
ICS 4.0.3 for our xPAD-70 (Type 1 iDx7) and xTAB-70 (Type 2 iDx7).
I must say, that these roms very fast and stable.
What's Working:
camera
touchscreen
physical buttons
wifi
audio, ringtones, notifications, alarms
microphone
root
adb
sdcard
sensors
usb host
everything
Install instruction/download links:
1. Connect the home charger to the Tablet PC. Charge the battery.
2. Download the compressed file to your PC/Laptop.
3. Create an empty folder on your desktop PC / laptop. Extract the downloaded .zip file into this empty folder.
4. Copy the four extracted files ("update.zip", "uImage_recovery", "uImage", "u-boot-512M-UartB.bin","factory_update_param.aml") to the root folder of an empty microSD card (2GB or higher). I you want to wipe and install manually, just delete the factory_update_param.aml file and boot into recovery without that.
5. Safely remove (disconnect) the microSD card.
6. Turn off the Tablet PC, but keep the home charger connected to it.
7. Insert the microSD card into the Tablet PC. After this step, don't pull out the microSD card.
8. Press and hold down the "volume up" button.
9. While holding down the "volume up" button , press and hold down the "power on" button for 6-9 seconds, and release the buttons after the last "upgrading... please wait" like messages.
Navigation inside the menu:
- Volume up and down buttons can be used to select a menu item.
- The "back" button (which is between the "home" and "menu" buttons) will activate a menu item.
10. Dont forget to hit the thanks button
Downloads:
==============
xPAD-70 (Type 1 iDx7) ICS 4.0.3 :
==============
ROM:http://www.mediafire.com/?1iqt5f1uamtrw2f
==============
xTAB-70 (Type 2 iDx7) ICS 4.0.3 :
==============
ROM: http://www.mediafire.com/?gtlqgdk33bhhtj2
===============================
ROOT packcage for ICS roms, xPAD/xTAB(apply after installig the upgrade) :http://www.mediafire.com/download.php?pfrrx7ja502qz2j
===============================
Older ROMs:
soon...
The language could be hungarian, but you can change to english with these settings:
1. Beállítások (its the hungarian word for Settings. Its in the menu) 2. Nyelv és billentyűzet (means Language and keyboard) 3. Nyelv kiválaszása (Select language) 4. Chose the English languge from that list. Thats all.
Copyright:
=========================================
[email protected]___________________
=========================================
2 links for xPAD-70 ?
murigny64 said:
2 links for xPAD-70 ?
Click to expand...
Click to collapse
Sry, i corrected, the second is the xTAB-70 ICS 4.0.3
I can't get BBC I player or Netflix to run with this rom. I get sound but no picture. Does anyone know why. Avi files run fine. Otherwise the from is very good. Been following this on the Hungarian forum but relying on google translate. Only other issue is the inertia scrolling.
Cheers carrotts
Sent from my xPAD-70 using xda premium
I have no idea about Netflix. Is seems to be working with CM nightlies. There is a XDA thread about netfix. I hope there is a solution for this.
This is the link: http://forum.xda-developers.com/showthread.php?t=1076150
The inertia scrolling fix appears in the next rom update. I hope.
cant use boot menu
Hi when i restart in boot menu i cant navigate it
When i press any button it reboots,
Anyone know if a setting needs adjusted?
As really needs updated
I got a question too....
I copied the files on SD Card but when i Press "volume Up" and "Power" Butten i get the upgrade Message and after the secon one he starts flashing but he doesnt start. i only get the waycom logo and the he reboots ....
Can someone help me?
Hello,
Do you have copy of ROM for similar device xTAB-70i ?
I am looking for Wayteq_xTAB_70i_20120620.zip.
I found some bugs in Trebuchet. If you move a widget to cancel button , you will find the widget is still at the homescreen in a wrong position. Also in cm 10.1.2, If you set up a folder at homescreen , and open it ,then you will find your home button can' t get back to the default screen any more.
(I am sorry . I am just a Chinese student ,so my English is poor.)
Hi,
I search the internet for the notification "unsent messages" but I is not successful. I can not find the "badgeprovider" in running applications and "do not keep activities" in the development options. When I clear the notification it disappears "unsent messages", but when I return to the menu SMS / MMS it reappears and I can not get rid of it .. If someone has a real solution please. For even *#272#IMEI# does not work, I get a message marked with "UNKNOW APPLICATION". And by the way I also have another problem, I do not know if its just the ROM or another, but by the time the two touch buttons at the bottom of the phone no longer works, I have to press the "Home" button and keys working again again.
ROM: CM 10.2 Nightly
Kernel: KT-SGS4
Launcher: Nova
Widgets; ZooperWidget
Recovery: CWM Touch 6.0.3.6
Model: GT-I9505 16Go (Intl - jfltexx).
Sorry for my bad English, i'm French and i use Google Translation .
Attachement Image.
Here is the logcat, I do not know if this will help you :/.
Hey guys,
There have been a ton of people asking how to activate onscreen buttons and disable the capacitive buttons since CM12 builds have started rolling out. Obviously, at some point, these features will be rolled into the ROM, but until then, I figured it would be a good idea to simply present a step-by-step thread on the issue. There have been answers all over the place button nothing dedicated and centralized, so I figured I would help some guys out.
Things needed:
CM12 Build on any variety (currently K900 and bpear have "nightlies" available in development. Check em out.
Root access. Just flash SuperSU 2.16 (http://download.chainfire.eu/589/SuperSU/UPDATE-SuperSU-v2.16.zip) if you don't have it. Root is necessary.
Zip to turn of the backlights: http://www.mediafire.com/download/p385se5ia28cqab/noSoftkeyBacklight.zip (thanks @Moody for this)
1.) Activate On-Screen buttons
- Use a program such as BuildProp Editor (look it up on the Play Store) to create a new build.prop entry. Call it qemu.hw.mainkeys, and set it's value to 0. If you are doing this manually, just add the line "qemu.hw.mainkeys=0"
- Reboot.
2.) Deactivate Capacitive buttons
- Download Root Explorer or some other program that allows editing of system level files.
- Mount your system as R/W. In root explorer at least, when you get into the system, there is a button up top to do so.
- Navigate to /system/usr/keylayout. Open Generic.kl in with a text editor.
- Comment out the follow lines by inserting a pound sign (#) in front of the line:
key 158 BACK
key 172 HOME
key 139 MENU
After this, they will read:
# key 158 BACK
# key 172 HOME
# key 139 MENU
Therse are numerically ordered, shouldn't be hard to find within the document.
- Remount your system as R/O.
3.) Turn off the capacitve back lights
- Reboot into custom recovery and flash noSoftKey.zip file you downloaded earlier.
- Reboot.
That should do it! You should now have software buttons and your hardware buttons should seemingly not exist!
Any questions or comments, please leave them here.
Anyone know how to enable hardware home long press to get to Google now?
TjPhysicist said:
Anyone know how to enable hardware home long press to get to Google now?
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.phoenixstudios.aiogestures&hl=en
Added to OnePlus One index thread:
[INDEX] OnePlus One Resources Compilation Roll-Up
Transmitted via Bacon
Hi there, first of all, thanks. I am having a problem where after I disabled the capacitive buttons (Step 2) the power and volume buttons are not working. Thanks in advance.
You know how to enable menu key also?
Verstuurd vanaf mijn Nexus 7 met Tapatalk
Yes any chance of getting home button long press as search? Default is the menu button doing this.
Its not working bro
Tried and followed your steps , disabling capacitive keys works but enabling on screen keys not working even after changing build.prop , also i read in some post that enabling on screen key mod will not work in cm roms is that true can any one confirm me?
i am using following rom its CM12
http://forum.xda-developers.com/oneplus-one/development/devrom-cm12-scheduled-builds-t2938372
its very stable didnt experience any glitch till now , multi user and guest account works , all the other features are working too, try it out friends.
Pure awesomeness, many thanks for this guide. I'm back to my comfort zone, onscreen for me is just more intuitive.?
BTW, how to bring back the capacitive lights? I tried to remove the script at /etc/init.d and it only bootloops after reboot.
Edit: Nvm, found it, re-flashing the ROM brings back all to the default behavior including the capacitive backlights.
kmakiki said:
3.) Turn off the capacitve back lights
- Reboot into custom recovery and flash noSoftKey.zip file you downloaded earlier.
- Reboot.
That should do it! You should now have software buttons and your hardware buttons should seemingly not exist!
Any questions or comments, please leave them here.
Click to expand...
Click to collapse
For some reason this step isn't working for me. I tried wiping cache/dalvik and it didn't fix anything
Can anyone give a screenshot of the on-screen buttons?
Is this possible to do in hydrogen OS? I love that rom, but i switch back since there is no option to turn off hardwer keys and enable software key in system?
Sent from my A0001 using Tapatalk
How to add volume button onscreen by editing buid.prop
Hey!
I have searched for these features without success not even for KK.
I try to find out how i can add move text cursor with volume buttons and adjust brightness with the notification bar as CM has but i want it on lollipop? Is it to early?
I know these features exist in gravitybox but it isn't sure if xposed will be released to ART/lollipop.
I loaded factory image and rooted, but don't want to flash CM12 just to get these two features.
Now for the question, is there any way to flash these features in recovery or do they need to be compiled within the rom?
Thanks in advance!
Still no change to this as it seems.
My Omni ROM doesn't support the Volume/curosr feature either.
GravityBox for LP does exist, although Xposed is still an alpha.
http://repo.xposed.info/module/com.ceco.lollipop.gravitybox
My new app Cursor Control lets you use the volume keys to easily move the cursor in text fields and works without Root.