Hey everyone my Nexus 4 was getting a never ending amount of app force close so I restarted my phone and it just stayed at the CyanogenMod boot animation. I tried booting into ClockworkMod to wipe factory reset and got a list of E: mount fails, I assume something to do with the storage?
I decided to revert to stock by using this method: http://forum.xda-developers.com/showthread.php?t=2347060
Nothing happens though, the device restarts in bootloader mode and nothing, the message I get in the program is posted as an attachment.
Is my Nexus 4 fried?
Only flash factory image with adb!
Sent from my Nexus 4 using xda app-developers app
Wtf did you do that for? You should have flashed the stock Google image with fastboot.
Sent from my Nexus 4 using Tapatalk 2
madd0g said:
Wtf did you do that for? You should have flashed the stock Google image with fastboot.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
It seemed like it would fix it, but it actually didn't change anything. I searched Google and XDA, that thread would show up as a top result. If someone could point me in the right direction?
Use http://forum.xda-developers.com/showthread.php?t=2015469
[Toolkit] Wug's Nexus Root Toolkit v1.7.2 [Updated 08/26/13]: Nexus 4
Used the flash stock while bricked option.
Sent from my Nexus 4 Running Vanir ROM by MBQ
Download the stock image from Google and flash with fastboot. Make sure you flash the latest bootloader and radio
Sent from my Nexus 4
TreatnHerRight said:
Use http://forum.xda-developers.com/showthread.php?t=2015469
[Toolkit] Wug's Nexus Root Toolkit v1.7.2 [Updated 08/26/13]: Nexus 4
Used the flash stock while bricked option.
Sent from my Nexus 4 Running Vanir ROM by MBQ
Click to expand...
Click to collapse
This is what I used, had some trouble with it and ended up being because I had the USB cable plugged into the front of my case instead of directly to the motherboard.
TreatnHerRight said:
Use http://forum.xda-developers.com/showthread.php?t=2015469
[Toolkit] Wug's Nexus Root Toolkit v1.7.2 [Updated 08/26/13]: Nexus 4
Used the flash stock while bricked option.
Sent from my Nexus 4 Running Vanir ROM by MBQ
Click to expand...
Click to collapse
That was the first method I tried, nothing happened. Latest attempt was: http://forum.xda-developers.com/showthread.php?t=2010312
However, at each step in command prompt I would get messages like:
failed: (remote: flash write failure)
clozecall said:
That was the first method I tried, nothing happened. Latest attempt was: http://forum.xda-developers.com/showthread.php?t=2010312
However, at each step in command prompt I would get messages like:
failed: (remote: flash write failure)
Click to expand...
Click to collapse
Wish I could help then, I've successfully used it. Your problem may be different.
Sent from my Nexus 4 Running Vanir ROM by MBQ
Have you tried this method?
http://forum.xda-developers.com/showthread.php?p=43164157
Sent from my Nexus 4 using xda app-developers app
aanonymoushuman said:
Have you tried this method?
http://forum.xda-developers.com/showthread.php?p=43164157
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Yeah, was mentioned above, nothing happened.
bump
download sdk pack on PC, download the latest 4.3 zip from google, add it to sdk/platform tools and run flash_all. bat. that should bring your phone to the factory state. hope it helps
Sent from my Nexus 4 using XDA Premium 4 mobile app
floxrin said:
download sdk pack on PC, download the latest 4.3 zip from google, add it to sdk/platform tools and run flash_all. bat. that should bring your phone to the factory state. hope it helps
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Could you elaborate more on this SDK pack. Where we can download the sdk?
BalaSingam said:
Could you elaborate more on this SDK pack. Where we can download the sdk?
Click to expand...
Click to collapse
1. download the pack here: http://developer.android.com/sdk/index.html put it in an easy to remember location, like on your C: drive on the PC
2. download the factory image from google here: https://developers.google.com/android/nexus/images#occam
u´ll probably want the 4.3 (JWR66Y) - the latest
3. unzip the google image in <your location>\adt-bundle-windows-x86_64-20130729\sdk\platform-tools
4. have your phone in bootloader mode (press power+volume down)
5. run flash-all.bat
hope it helps you...
Related
Hi all,
I'm freaking out here. I was trying to install a kernel on my N4 using the Toolkit and somehow it said it was done successfully but then my phone got stuck on the Google screen and was never able to start up again.
I do have a Nandroid back up but unfortunately it's on my computer and not on my phone.
I tried using the toolkit AND adb to push the files to my phone but I get the same message: "failed to copy to sdcard: No such file or directory".
I'm completely stuck now and am panicking. Somebody please help!
And this is why we don't use toolkits.
Read up on how to use fastboot and how to boot into fastboot.
Then read up on where to find stock images and how to flash them in fastboot. Then do it.
Sent from my Nexus 4 using Tapatalk 2
Why would you use a toolkit to flash a kernel ...just download zip go to recovery cwm or twrp and flash...
Can you get into fast boot ??
Sent from my Nexus 4 using xda app-developers app
Might also be helpful if you specified which kernel you flashed. As long as you didn't flash a kernel for a different device (e.g. nexus 7) you can definitely recover. To reiterate what others have mentioned, fastboot is your friend. There are numerous tutorials on his to install and use it. Check the stickies.
Crisisx1 said:
Why would you use a toolkit to flash a kernel ...just download zip go to recovery cwm or twrp and flash...
Can you get into fast boot ??
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Yeah I can get into fast boot and even into CWM. I tried factory resetting in CWM but it still gets stuck on the Google screen.
The reason I used the toolkit and not CWM to flash the kernel is because CWM kept failing to flash the kernel, giving me some error and "(bad)" message. It is the kernel to improve Nexus 4 sensitivity directly from another thread.
Can someone please provide me with specific links or detailed instructions?
Crisisx1 said:
Why would you use a toolkit to flash a kernel ...just download zip go to recovery cwm or twrp and flash...
Can you get into fast boot ??
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
My main problem is I need to get my Nandroid backup onto my phone. For some reason, because it's stuck on the Google screen, it's not able to write to the sdcard. Can someone please help me get my files from my computer to my phone?
Flash stock first.
Follow Efrants guides.
http://forum.xda-developers.com/showthread.php?p=34552123
Sent from my Nexus 4 using xda premium
Unjustable said:
Flash stock first.
Follow Efrants guides.
http://forum.xda-developers.com/showthread.php?p=34552123
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Thanks for your help. I've successfully follows the instructions and got back to Android 4.2.2.
I still want to restore my previous Nandroid though. Although I have placed it in the Clockworkmod backup folder, it's not being seen by CWM recovery. I tried backing up a new nandroid just to test and CWM sees the one it backs up.
Anyone know how I can get CWM to recognize the Nandroid which was done through the toolkit?
Thanks!
darkwolf1789 said:
Yeah I can get into fast boot and even into CWM. I tried factory resetting in CWM but it still gets stuck on the Google screen.
The reason I used the toolkit and not CWM to flash the kernel is because CWM kept failing to flash the kernel, giving me some error and "(bad)" message. It is the kernel to improve Nexus 4 sensitivity directly from another thread.
Can someone please provide me with specific links or detailed instructions?
Click to expand...
Click to collapse
If the kernel wasn't installing in the first place you probably shouldn't of flashed it via toolkit
Sent from my Nexus 4 using xda app-developers app
Crisisx1 said:
If the kernel wasn't installing in the first place you probably shouldn't of flashed it via toolkit
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Yeah I realize that now. But any idea how to get CWM to recognize my Nandroid that I did with the toolkit? Anyone?
joshnichols189 said:
And this is why we don't use toolkits.
Read up on how to use fastboot and how to boot into fastboot.
Then read up on where to find stock images and how to flash them in fastboot. Then do it.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
There isn't really anything wrong with a toolkit for certain things, I just think it's a bit strange he tried to use it for something as trivial as this.
skezza said:
There isn't really anything wrong with a toolkit for certain things, I just think it's a bit strange he tried to use it for something as trivial as this.
Click to expand...
Click to collapse
Ok well to solve the problem I did download the stock images and flash them according to Effrants guide:
http://forum.xda-developers.com/show...php?p=34552123
Then the reason that CWM wasn't recognizing my Nandroids was because I had them in /sdcard/clockworkmod/backups, but they should be in /data/media/clockworkmod/backup.
I recovered everything and I'm back! Thanks for your help everyone.
I was on stock 4.2.2 with TWRP installed and I took the OTA to 4.3. Now whenever I try and access my recovery it dispays the Android mascot lying on its back, chest open with a red triangle with an exclamation mark above. I tried flashing TWRP 2.6 via fastboot twice but I still get the same error. How can I fix this? Thank you!
What Fastboot command did you do?, toolkits can't help on 4.3.
The android getting operated on is a security feature so criminals cannot get your data, it is Volume up and power to access the stock recovery on that screen.
Sent from my Nexus 4 using Tapatalk 4
Same exact situation. Stock 4.2.2 with TWRP installed (version 2.6) and then did the OTA. Losing TWRP and root in this situation is normal. I also could not reinstall TWRP the normal fastboot way, and then I saw the following on several forums, and it installed jut fine:
fastboot-windows -c "lge.kcal=0|0|0|x" flash recovery recovery.img
pjc123 said:
Same exact situation. Stock 4.2.2 with TWRP installed (version 2.6) and then did the OTA. Losing TWRP and root in this situation is normal. I also could not reinstall TWRP the normal fastboot way, and then I saw the following on several forums, and it installed jut fine:
fastboot-windows -c "lge.kcal=0|0|0|x" flash recovery recovery.img
Click to expand...
Click to collapse
I managed to fix this after trying a variety of things. All I had to do was rename the downloaded TWRP file and flash using "fastboot flash recovery twrp.img" and it worked flawlessly.
andyabc said:
What Fastboot command did you do?, toolkits can't help on 4.3.
The android getting operated on is a security feature so criminals cannot get your data, it is Volume up and power to access the stock recovery on that screen.
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
What do you mean by toolkits cant help?!
I still can root my 4.3 JB via toolkits like wugfresh etc?! Right?!
And i too got the same problem couple of days back while rooting manually, so finally had to flash stock.
Sent from my Nexus 4 using xda premium
ssbnasa said:
What do you mean by toolkits cant help?!
I still can root my 4.3 JB via toolkits like wugfresh etc?! Right?!
And i too got the same problem couple of days back while rooting manually, so finally had to flash stock.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Rooting your device running 4.3 by booting a unsecure 4.2.2 kernel?, not really what I had in mind and not really recommended what so ever...
Sent from my Nexus 4 using Tapatalk 4
andyabc said:
Rooting your device running 4.3 by booting a unsecure 4.2.2 kernel?, not really what I had in mind and not really recommended what so ever...
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
No not about booting an unsecure kernel, i'm talking about using toolkits for rooting 4.3 via toolkit :|
They're goog to go right?!
Sent from my Nexus 4 using xda premium
ssbnasa said:
No not about booting an unsecure kernel, i'm talking about using toolkits for rooting 4.3 via toolkit :|
They're goog to go right?!
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Well the kernel may contain something which allows support and causes no damage so yes.
Sent from my Nexus 4 using Tapatalk 4
Hi there, I'm currently rooted with 4.2.2 and I want to upgrade to the latest which I believe is 4.4.2, after a brief check I don't see the toolkits supporting this so can someone give me a clue on what to do? Is it upgrade to 4.3 then 4.4 and finally 4.4.2 or can I just jump from my current to 4.4.2?
Sent from my Nexus 10 using xda app-developers app
TomAshcroft said:
Hi there, I'm currently rooted with 4.2.2 and I want to upgrade to the latest which I believe is 4.4.2, after a brief check I don't see the toolkits supporting this so can someone give me a clue on what to do? Is it upgrade to 4.3 then 4.4 and finally 4.4.2 or can I just jump from my current to 4.4.2?
Sent from my Nexus 10 using xda app-developers app
Click to expand...
Click to collapse
If your on stock ROM and kernel and recovery just check for updates under about tablet system updates. If your running a custom ROM or kernel then you'll want to get to stock first. Also you can just download the factory image and adb flash it. Just search how to install 4.4,2 factory image with adb on nexus 10. There's plenty of guides.
Sent from my white LG Nexus 5
abdel12345 said:
If your on stock ROM and kernel and recovery just check for updates under about tablet system updates. If your running a custom ROM or kernel then you'll want to get to stock first. Also you can just download the factory image and adb flash it. Just search how to install 4.4,2 factory image with adb on nexus 10. There's plenty of guides.
Sent from my white LG Nexus 5
Click to expand...
Click to collapse
Adb? I think you mean fastboot ?
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
Adb? I think you mean fastboot ?
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
Yes fastboot my bad. I meant use adb commands to flash like fastboot flash ...
My brain was dead from stuyding lol
Sent from my white LG Nexus 5
I want to remain rooted though, also I'm trying to use the system update but it says restarting in 10, counts down then doesn't restart.
Since I want to remain rooted but just upgrade to 4.4.2 what can I do? I can't find an appropriate video.
Sent from my Nexus 10 using xda app-developers app
Well attaining root again only takes about 1 minute....
Sent from my Nexus 10 using XDA Premium 4 mobile app
TomAshcroft said:
I want to remain rooted though, also I'm trying to use the system update but it says restarting in 10, counts down then doesn't restart.
Since I want to remain rooted but just upgrade to 4.4.2 what can I do? I can't find an appropriate video.
Sent from my Nexus 10 using xda app-developers app
Click to expand...
Click to collapse
Just update and root again. It takes a minute using one of the toolkits. Or you can just flash the super su zip which is even quicker if you have a custom recovery. Either way it's easy and quick
Sent from my white LG Nexus 5
I can't use system updates, it won't restart after counting down from 10 it just hangs there. I also don't think the toolkits have 4.4.2, I'm pretty sure I downloaded the right files, I just don't know the commands to use in CMD.
Sent from my Nexus 10 using xda app-developers app
TomAshcroft said:
I can't use system updates, it won't restart after counting down from 10 it just hangs there. I also don't think the toolkits have 4.4.2, I'm pretty sure I downloaded the right files, I just don't know the commands to use in CMD.
Sent from my Nexus 10 using xda app-developers app
Click to expand...
Click to collapse
Wugs toolkit has it.
Extract it and put it in the correct folder with Fastboot capabilities and use the commands
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img (this'll give you stock recovery)
fastboot flash userdata userdata.img (only do this one if you want to completely reset and delete everything on your internal SD card. Don't do this step of you want to keep your files like pictures and music on SD card)
Sent from my white LG Nexus 5
Okay, going to try Wugs. Ah, I'm mistaken then, I just have the factory image and update superSU zip files.
See this is what I don't get, it asks me my build, which is 4.2.2. And then asks to download the image, but I want 4.4.2 so do o just change it to that?
Sent from my Nexus 10 using xda app-developers app
TomAshcroft said:
Okay, going to try Wugs. Ah, I'm mistaken then, I just have the factory image and update superSU zip files.
See this is what I don't get, it asks me my build, which is 4.2.2. And then asks to download the image, but I want 4.4.2 so do o just change it to that?
Sent from my Nexus 10 using xda app-developers app
Click to expand...
Click to collapse
Yeah. Choose 4.4.2. Asking your build is just so when you flash kernnel and recoveries it flashes a compatible one. But since your just flashing stock images. Just do that. But again remember it'll wipe everything so backup your SD card to a computer first
Sent from my white LG Nexus 5
Okay trying this now, which option would I choose as my boot loader is already unlocked and I'm already rooted
Sent from my Nexus 10 using xda app-developers app
I managed to get to the point where it boots TWRP and then just had "waiting for device"
Edit: got to this same point 3 times now, tried rebooting but I'm still on 4.2.2, could you tell me what files I need to go ahead and flash it using cmd?
Sent from my Nexus 10 using xda app-developers app
If you use Wigs toolkit you can flash the new update if you do a complete restore with in root. Then you can re root. Just go to flash stock + unroot then click the images drop down down box. Pick the mantaray-manta : android 4.4.4- build KOT49H then click the button that shows automatically download. After install re root and restore. Backup everything first it makes a quicker restore.
Sent from my Nexus 10 using xda app-developers app
TomAshcroft said:
I managed to get to the point where it boots TWRP and then just had "waiting for device"
Edit: got to this same point 3 times now, tried rebooting but I'm still on 4.2.2, could you tell me what files I need to go ahead and flash it using cmd?
Sent from my Nexus 10 using xda app-developers app
Click to expand...
Click to collapse
Gimme a sec ill type this up for ya, I just want to make sure its good and detailed.
Sent from my Nexus 10 using XDA Premium 4 mobile app
---------- Post added at 06:33 AM ---------- Previous post was at 05:43 AM ----------
First, go download the image:
https://developers.google.com/android/nexus/images
While that is downloading, make a new folder on the desktop and name it FLASH, also for extracting the file once it is downloaded I reccomend total commander:
http://www.ghisler.com/download.htm
Also head over to here to download adb and fastboot without the android sdk:
https://docs.google.com/file/d/0B1MWexkzYR_bV2VlaF9UcHVBU00/edit?usp=docslist_api
Once the zip file with adb and fastboot is downloaded extract the files into the FLASH folder. Now that we've done all this the image should be downloaded, extract the contents to the FLASH folder. Now open up command prompt. In command prompt type the following(excluding the quotation marks):
"cd C:\Users\*username*\Desktop\FLASH"
*username* Is the name of the user. Now turn off your device then boot your device into fastboot mode(hold the power+volume up+volume down buttons) once your device is in fastboot mode connect it to your computer. In command prompt type(again excluding quotations):
"fastboot devices"
After that you should see your nexus device in fastboot mode, if you have no important data and don't care about losing everything(me) you can just type this in command prompt(no quotations):
"flash-all"
But if that does not work or you do have important things, type:
"fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img”
Sent from my Nexus 10 using XDA Premium 4 mobile app
Hi guys thanks for all the help, I decided to go with Wugs toolkit, unrooted, then re rooted with 4.4.2. All worked fine just need to restore my data now
Sent from my Nexus 10 using xda app-developers app
Hi, I booted into TWRP recovery mode to attempt updating my rooted Nexus 7 from 4.2.2 to 4.3. I wiped system, dalvik cache and cache. I also (stupidly) wiped data and internal storage too. Now I cannot turn on my Nexus 7 fully, it only shows the Google insignia with the unlocked boot loader icon below it.
I can boot into recovery mode and I can USB host, I tried copying a zip of the stock 4.2.2 ROM for Nexus 7 wifi onto my flash drive and tried flashing under the "install" section on TWRP but it always fails (I do not know why).
I cannot connect my Nexus 7 to the computer. Can anyone help me out, please?
Use adb side load in advanced settings
adb sideload nameofrom.zip
adb sideload gapps.zip
Reboot
Profit
Sent from my Nexus 4 using XDA Premium 4 mobile app
Either flash a custom ROM from recovery or use the Wugfresh toolkit to flash a stock ROM.
Sent from my IdeaTab A3000-F using xda app-developers app
dimbo33 said:
Either flash a custom ROM from recovery or use the Wugfresh toolkit to flash a stock ROM.
Sent from my IdeaTab A3000-F using xda app-developers app
Click to expand...
Click to collapse
Agreed, the toolkit works like a charm.
I had also deleted the whole Os and fixed it with the help of the toolkit.
Not sure why folks keep telling you to flash a custom rom when you ha e clearly stated that it fails. So, heres my two cents......
Since you already wiped the internal memory and there is no chance of data loss, just download the stock image and fastboot back to a fresh system. And for gods sake, dont use wugs. Just use good ole fastboot. There is a very easy how-to in the stickies of this section. This forum is full of problems arising from toolkits, that could have been easily avoided by fastboot.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Toolkit to Rescue
dimbo33 said:
Either flash a custom ROM from recovery or use the Wugfresh toolkit to flash a stock ROM.
Sent from my IdeaTab A3000-F using xda app-developers app
Click to expand...
Click to collapse
I SECOND that use the toolkit from wugfresh for this.
ADB sideload and Fastboot is a real pain with TWRP don't know why the file does not get pushed at all.
Save yourself time and just use the toolkit if it's a Nexus device if Samsung find a similar toolkit tool
The site for toolkit is wugfresh . com ( no urls so the space )
Hope this helps someone
Good luck
Martin
brenmartin said:
I SECOND that use the toolkit from wugfresh for this.
ADB sideload and Fastboot is a real pain with TWRP don't know why the file does not get pushed at all.
Save yourself time and just use the toolkit if it's a Nexus device if Samsung find a similar toolkit tool
The site for toolkit is wugfresh . com ( no urls so the space )
Hope this helps someone
Good luck
Martin
Click to expand...
Click to collapse
Why are you necro'ing old threads to spam wug's website?
Sent from my Nexus 5
Recently, I have been trying to install 5.0.1 update, as my phone is rooted, but every time I see "adb is out of date... killing...". I have been trying many times to update using nexus root toolkit and manual way but it doesn't work. Everything else work like putting and taking files from my phone. My phone is on LRX21T, rooted and with custom recovery (TWRP). If there is no way to fix the problem, can someone give me LRX22C flashable zip to flash the update using TWRP?
Ali_Mahmoud said:
Recently, I have been trying to install 5.0.1 update, as my phone is rooted, but every time I see "adb is out of date... killing...". I have been trying many times to update using nexus root toolkit and manual way but it doesn't work. Everything else work like putting and taking files from my phone. My phone is on LRX21T, rooted and with custom recovery (TWRP). If there is no way to fix the problem, can someone give me LRX22C flashable zip to flash the update using TWRP?
Click to expand...
Click to collapse
Google 15 second adb xda. That'll set up the latest version of adb and fastboot on your device. There is no flashable 22C twrp flashable zip
Sent from my Nexus 9 using XDA Free mobile app
I used it but still I get that sentence
Ali_Mahmoud said:
I used it but still I get that sentence
Click to expand...
Click to collapse
What are you trying to do?
Sent from my Nexus 9 using XDA Free mobile app
I said I want to update my phone to 5.0.1 but adb is not working so I can't update my phone using Nexus Root Toolkit and I can't update it manually
Sent from my Nexus 4 using XDA Free mobile app
Ali_Mahmoud said:
I said I want to update my phone to 5.0.1 but adb is not working so I can't update my phone using Nexus Root Toolkit and I can't update it manually
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Are you on 5.0?
Sent from my Nexus 9 using XDA Free mobile app
Yeah
Sent from my Nexus 4 using XDA Free mobile app
You'll get rid of the message if you kill "adb.exe" using Task Manager. But to flash the factory images manually you don't really need ADB. Just power it off, boot into fastboot (hold Vol- while starting it) and follow steps C and D from this guide
Ali_Mahmoud said:
Yeah
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Download the factory image from here https://developers.google.com/android/nexus/images. Extract it using 7-zip or winrar. You'll find the radio.img file and a zip file. Extract the zip file too. In there is system and boot images.
Open a command window in the first folder, the one where the radio image files is. Then
fastboot flash radio radio.img. (note user the full name of the radio image file
Then open a command window in the folder the boot and system images are in. Then
fastboot flash boot boot.img
fastboot flash system system.img
You'll be updated to 5.0.1
Sent from my Nexus 9 using XDA Free mobile app
Thank you guys. My phone is now updated to 5.0.1, thanks to you.
Sent from my Nexus 4 using XDA Free mobile app