I tried 5 different roms paranoid android,everlov,pacman etc they all have the same result with every rom when it boots I get the acore process error but if I try going into settings open any apps the screen turns black all except for paranoid kingdroid. With this rom the screen doesn't turn black but it lags from the acore.process error and the sound/mic does not work.
I tried flashing these roms over and over reformating the system and tried them both with two iffernt kernels uber 2.0 and hot-kernelz I honestly don't know what else to do nothing is working for me
*clearing contacts does not work
Related
Hi Guys
When I turn my phone on, after the Galaxy S first screen, the screen is multi-colored for about 1 second before going to the boot animation. Once the boot animation appears the screen is fine.
That's not a problem. What is a problem is booting into recovery, the top of the screen has a few blue lines. It still operates as if it is in recovery, as if I press the power button it reboots - but if I press down once, then power, it's not rebooting. So it looks like it's just the screen can't display what's being sent to it. So I can't do anything in Recovery like installing the auto-phone record, screen capture service or extended power menu. It will also be a problem if I come to install another ROM.
Does anyone know why? It started happening after I flashed a new ROM - I flashed the new ROM because the phone was constantly freezing when running certain apps (and needed the battery removed to restart the phone) - it's no longer freezing.
thanks
I'm not sure but,i think it because you don't have the good bootloader.For example,if you flash a rom from Froyo to gingerbread,you need to choose a rom with the gingerbread sbl(bootloader) include.
So to avoid this problem,just re-flash the entire rom with boot loader included.
Just go there http://forum.xda-developers.com/showthread.php?t=1102881
thanks I'll try that
Recently my HD2 has been acting up a little, it's running android (I've basically followed and installed everything on htchd2android.com/how-to/how-to-install-android-on-htc-hd2-android-4-0-4/), and yesterday would just show the green HTC logo for a second before turning off whenever I tried to boot it up.
I tried taking out the battery and sd card, put it back in to boot up, but this time the screen flashed yellow and white and went all glitchy for a few seconds, and ever since when I try to boot it it shows a glitched HTC logo and stays like that indefinitely.
(You can see what the screen looks like currently at i.imgur.com/42kYqkl.jpg)
I've tried reinstalling the custom rom, everything bar a factory reset (which will be my last resort), but really I just want to know what's caused or causing the problem.
Any advice appreciated!
Had the same problem yestrdy and i flash the rom again now its working fine.. but you wait for someone's solution i suggest if ur data is important
Sent from my NexusHD2 using xda app-developers app
Hello, please i really need help
so tried good lock (Samsung systemUI), after that, the phone become unstable... I uninstalled it and the phone had a lot of fc of systemUI and other apps and random reboots, and sometimes it boot into recovery on its own sometimes into download mode, so i flashed another official firmware and did a factory reset , but no luck , then i flashed a ported Rom (Dr.ketan Rom) now my phone don't do a lot of fc and don't reboot into recovery and download mode on its own , but still having a lote of random reboots and a lot of freezes, any ideas guys? i looked everywhere but nothing
Same problem as you, but it's worst : I tried latest Good Lock 24.0.10 and after uninstalling it, I got a popup saying "SystemUI has stopped working", with black screen and can't do anything else than accessing menu with Lock Key (with reboot, shutdown buttons, etc.) :/
Tried to reflash ROM with ALEXNDR ROM for Note4 but same problem. Any solution ? I'm trying to restore Good Lock latest apk through flashable .zip to see if I can re-use my phone.
Good morning, I need help
I install the rom stock J500FNXXS1BQG1_J500FNITV1BPL1_ITV and on reboot gives me DRK error. To skip the problem I install the Twrp-3.2.1-1-j5nlte and on reboot after 10 minutes the phone only starts working that this rom weighs down the phone of useless applications.
I tried to flash several rom downloaded from your page but on reboot the phone display turns green and does not start and goes in loop. Only ROM that does not give me this problem and the MIUI-8-MM-8.5.5-J5xx but has a bug that you do not hear loudspeaker. How can I resolve to put a cyanogem miui or other type of rom?
Hello today a screen replacement i ordered in aliexpress arrived and i did change it carefully (i did this process 2 times 1 in my phone and another in a cousin mi a1. No problems).
The thing is... after this i turn on the phone and the screen turns on but only until rom starts to load and then it comes black as if it wasn't turn on. The screen turns on also in fastboot mode but instantly shutdown when entering to recovery mode or normal boot as i said. The phone is working properly the rom loads and there is notification sounds and touch is working too.
If anyone can help me please. The only thing i can thing of is that the screen came with some strange malfunction.
EDIT: I flashed stock rom with flash_all and got the screen and everything working fine. I then tried again to flash a custom rom as i had before and screen failed to turn on again. Then i flashed stock kernel just to try if was it the cause and after this screen worked fine again but i lost wifi and probably there is other issues because of the stock kernel on a custom rom. I don't know if it may be because a different display driver or a kernel setting that may cause this malfunction. Hope someone can help me to solve this as i really want to use a custom rom.