not sure what is going on but i have twrp recovery and running the triforce rom at the moment. though every rom has done same thing that i have tried. i swap batteries alot rather then charge the phone so this is a pain since the only fix i have found is reboot to recovery which also sometimes freezes on the twrp logo and do complete wipe. then it will boot up fine. but of course everything is gone.
excessive81 said:
not sure what is going on but i have twrp recovery and running the triforce rom at the moment. though every rom has done same thing that i have tried. i swap batteries alot rather then charge the phone so this is a pain since the only fix i have found is reboot to recovery which also sometimes freezes on the twrp logo and do complete wipe. then it will boot up fine. but of course everything is gone.
Click to expand...
Click to collapse
Which twrp recovery you using?
Sent from my SPH-L720 using xda app-developers app
openrecovery-twrp-2.6.0.0-jfltespr
excessive81 said:
openrecovery-twrp-2.6.0.0-jfltespr
Click to expand...
Click to collapse
Twrp version 2.6.0.0 seems to be buggy either try 2.5.0.2 or 2.6.0.3 they seem to be working for people the most
Sent from my SPH-L720 using xda app-developers app
excessive81 said:
not sure what is going on but i have twrp recovery and running the triforce rom at the moment. though every rom has done same thing that i have tried. i swap batteries alot rather then charge the phone so this is a pain since the only fix i have found is reboot to recovery which also sometimes freezes on the twrp logo and do complete wipe. then it will boot up fine. but of course everything is gone.
Click to expand...
Click to collapse
This has been a problem for me as well. I've used TWRP 2.5.0.2 and the 2.6.x.x versions with the same issue. Typically only happens after flashing an AOSP based ROM then restoring a TW nandroid. For me, one of the partitions gets corrupted, I've had /data and /system both get borked. Formatting in TWRP and CWM does nothing to fix the problem. My only solution so far has been to ODIN crawjs rooted stock MF9 .tar and factory reset in stock recovery. This seems to restore the partition. After that, reboot into download again and flash TWRP 2.5.0.2 .tar. Only then can I successfully restore a previous Nandroid.
It's weird, the first boot always works. Haven't heard a definitive answer to why this happens. I may experiment flashing an AOSP with CWM and see if the same issue persists.
smizak said:
This has been a problem for me as well. I've used TWRP 2.5.0.2 and the 2.6.x.x versions with the same issue. Typically only happens after flashing an AOSP based ROM then restoring a TW nandroid. For me, one of the partitions gets corrupted, I've had /data and /system both get borked. Formatting in TWRP and CWM does nothing to fix the problem. My only solution so far has been to ODIN crawjs rooted stock MF9 .tar and factory reset in stock recovery. This seems to restore the partition. After that, reboot into download again and flash TWRP 2.5.0.2 .tar. Only then can I successfully restore a previous Nandroid.
It's weird, the first boot always works. Haven't heard a definitive answer to why this happens. I may experiment flashing an AOSP with CWM and see if the same issue persists.
Click to expand...
Click to collapse
the 2.6.3 worked thanks
excessive81 said:
the 2.6.3 worked thanks
Click to expand...
Click to collapse
That one still gets stuck on team win curtain,,, This one has been the best yet and I've flashed a ton with it :beer::thumbup:
http://www.androidfilehost.com/?fid=23159073880933366
Sent from my SPH-L720 using xda app-developers app
ParkerParker said:
That one still gets stuck on team win curtain,,, This one has been the best yet and I've flashed a ton with it :beer::thumbup:
http://www.androidfilehost.com/?fid=23159073880933366
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
that file for 2.6.3.1 is not a tar file how do you flash it?
also i dont have freezing issues anymore but now after rebooting sd card no seen/working. it is there you can see it in settings menu which says it is mounted but the apps i moved to it dont work and the music is gone. if i unmount the card i can not remount it.
excessive81 said:
that file for 2.6.3.1 is not a tar file how do you flash it?
also i dont have freezing issues anymore but now after rebooting sd card no seen/working. it is there you can see it in settings menu which says it is mounted but the apps i moved to it dont work and the music is gone. if i unmount the card i can not remount it.
Click to expand...
Click to collapse
stock recovery, factory reset. trust me.
excessive81 said:
that file for 2.6.3.1 is not a tar file how do you flash it?
also i dont have freezing issues anymore
Just give it some time you will have curtain hangs... If you flash a lot.. But onto the zip, just flash in recovery, done
Heres the twrp thread if you feel like a read, http://forum.xda-developers.com/showthread.php?t=2262999
Click to expand...
Click to collapse
Related
Hey all,
I RSD'd the other day and then re-rooted and re-unlocked the bootloader (yes, I now know it stays unlocked) and flashed CWM v6.0.1.4 recovery.
Now none of the custom ROMs will boot, though they install correctly in recovery. From CyanogenMod to Carbon to AOSP, it just sits on the boot animation... I've let it sit for up to half an hour.
I'm wiping data and cache, though CWM says E:Can't mount /cache/recovery/pretty-much every subfolder, but that doesn't seem like a big deal...
So what am I doing wrong, here, any ideas? It doesn't matter if I install the ROMs and GAPPS from external SD, right?
I RSD'd to 96.15.66, the one where I can unlock the bootloader, and the only ROM I can get to boot is Clean Rom (basically stock with tweaks of course).
jimmyco2008 said:
Hey all,
I RSD'd the other day and then re-rooted and re-unlocked the bootloader (yes, I now know it stays unlocked) and flashed CWM v6.0.1.4 recovery.
Now none of the custom ROMs will boot, though they install correctly in recovery. From CyanogenMod to Carbon to AOSP, it just sits on the boot animation... I've let it sit for up to half an hour.
I'm wiping data and cache, though CWM says E:Can't mount /cache/recovery/pretty-much every subfolder, but that doesn't seem like a big deal...
So what am I doing wrong, here, any ideas? It doesn't matter if I install the ROMs and GAPPS from external SD, right?
I RSD'd to 96.15.66, the one where I can unlock the bootloader, and the only ROM I can get to boot is Clean Rom (basically stock with tweaks of course).
Click to expand...
Click to collapse
are you mounting system first? never used CWM on this device, but in TWRP, they install just fine. I believe that most devs use TWRP (although, it should not make a difference).
Thanks for the reply, actually I have two cwm recovery images, and after the RSD I flashed the "wrong" one... After flashing the other, I was able to flash and boot just fine.
jimmyco2008 said:
Thanks for the reply, actually I have two cwm recovery images, and after the RSD I flashed the "wrong" one... After flashing the other, I was able to flash and boot just fine.
Click to expand...
Click to collapse
Hi Im not sure if Im having this exact issue but I have been having problem since I used Utility 1.20 and re-rooted and re-unlocked my phone. Every ROM I have tried has random reboot issue. Can you tell me exactly how you did it correctly?
Also I didnt understand the two recovery image concept. I was having safe strap before and had issue with stock partition and was using slot1 partition as daily rom. And I couldnt flash any other ROM. So I had to go back to stock with Utility 1.2 and start over. Right now Im having liquidsmooth ROM with CWM recovery. Still having those reboots.
jcxmej said:
Hi Im not sure if Im having this exact issue but I have been having problem since I used Utility 1.20 and re-rooted and re-unlocked my phone. Every ROM I have tried has random reboot issue. Can you tell me exactly how you did it correctly?
Also I didnt understand the two recovery image concept. I was having safe strap before and had issue with stock partition and was using slot1 partition as daily rom. And I couldnt flash any other ROM. So I had to go back to stock with Utility 1.2 and start over. Right now Im having liquidsmooth ROM with CWM recovery. Still having those reboots.
Click to expand...
Click to collapse
are you sure you uninstalled SS via the app (and not via the android system)?
jco23 said:
are you sure you uninstalled SS via the app (and not via the android system)?
Click to expand...
Click to collapse
I dont think I have uninstalled safestrap with an app. I followed the instruction in this thread.
http://forum.xda-developers.com/showthread.php?t=2238341
This thread was started by me when I had problem with flashing ROMs in the stock slot using safestrap. Rikrong suggested I use Utility so that I go back to stock and start all over again. So I did. I guess thats how it should have been done?
jcxmej said:
I dont think I have uninstalled safestrap with an app. I followed the instruction in this thread.
http://forum.xda-developers.com/showthread.php?t=2238341
This thread was started by me when I had problem with flashing ROMs in the stock slot using safestrap. Rikrong suggested I use Utility so that I go back to stock and start all over again. So I did. I guess thats how it should have been done?
Click to expand...
Click to collapse
what I would suggest doing is going into SS via the app (not via recovery once the phone boots up) and click the uninstall button.
then, return to stock as rik suggested.... then root, then install TWRP, then you'll be able to slap on whatever ROM you like.
jco23 said:
what I would suggest doing is going into SS via the app (not via recovery once the phone boots up) and click the uninstall button.
then, return to stock as rik suggested.... then root, then install TWRP, then you'll be able to slap on whatever ROM you like.
Click to expand...
Click to collapse
Actually I did all that already just not by uninstalling SS. Now Im on CWM recovery. I was on SS one week back and then i followed the instructions by rik. I m having reboots ever since.
jcxmej said:
Actually I did all that already just not by uninstalling SS. Now Im on CWM recovery. I was on SS one week back and then i followed the instructions by rik. I m having reboots ever since.
Click to expand...
Click to collapse
I'm thinking the combination of SS and CWM could be the issue.... try to get a clean fresh start would be best....
jco23 said:
I'm thinking the combination of SS and CWM could be the issue.... try to get a clean fresh start would be best....
Click to expand...
Click to collapse
Thats interesting. I dont see safe strap or the rom i was using with SS (energy rom). So then how can i erase SS and get a fresh start? I was assuming Matts Utility already did that for me and I was on a fresh start.
jcxmej said:
Thats interesting. I dont see safe strap or the rom i was using with SS (energy rom). So then how can i erase SS and get a fresh start? I was assuming Matts Utility already did that for me and I was on a fresh start.
Click to expand...
Click to collapse
safestrap could still be there if uninstalled incorrectly. trying re-installing it, then uninstall it within its own app. this worked for me.
jco23 said:
safestrap could still be there if uninstalled incorrectly. trying re-installing it, then uninstall it within its own app. this worked for me.
Click to expand...
Click to collapse
Just installed SS and unnistalled it thru the app. I ll wait for any reboots before I reflash the ROM. Hope this works. (finger crossed)
This isn't my very first time with flashing/rooting/etc. but I'm not that adept with it.
Got my S4 2 days ago but managed to get time today to work on it. I rooted successfully and everything was running perfect. I flashed over the newest Beanstalk ROM w/ gapps and it ran fine the first time it ran.
I can't get passed the Samsung Galaxy S4 boot logo every time I try to reboot the phone though...
If I wipe the cache/dalvik and reflash it still doesn't boot passed logo.
If I wipe the cache/dalvik and then wipe data (including the internal SD card, completely wiping it clean), flashing the ROM will work the first time it runs; once I reboot or just power it off then power it back on, stuck at Galaxy S4 logo... I let the ROM run first time through, input only what is needed to get to the home screen (google account/wifi setup/phone name/etc.), then I've tried rebooting it, shutting it down and powering it back up, letting everything update and waiting half an hour and restarting it... all have the same result, stuck at boot logo
I'm using TWRP, I have a recovery for stock but I don't want to use stock.
If anyone can help me out I'd appreciate it.
Try flashing a different compatible kernel.
ObrienDave said:
Try flashing a different compatible kernel.
Click to expand...
Click to collapse
This is EXACTLY what I was about to try... I'm literally reflashing the ROM fresh right now, going to put the kernel on the SD card, then reboot into recovery and wiping cache then flashing the kernel.
Will using a recovery that was made on a different kernel have any effect if I decide to use the recovery? I've heard bad things about flashing the wrong kernel (even though I know the one I'm about to use is the correct one) and really screwing stuff up if not done properly. I just want to make sure I don't screw anything up permanently.
Thanks.
Spazzzin said:
This is EXACTLY what I was about to try... I'm literally reflashing the ROM fresh right now, going to put the kernel on the SD card, then reboot into recovery and wiping cache then flashing the kernel.
Will using a recovery that was made on a different kernel have any effect if I decide to use the recovery? I've heard bad things about flashing the wrong kernel (even though I know the one I'm about to use is the correct one) and really screwing stuff up if not done properly. I just want to make sure I don't screw anything up permanently.
Thanks.
Click to expand...
Click to collapse
Use twrp 2.5.0.2 because if your using 2.6 its bringing problems. Also report this to their thread for better help
Sent from my SPH-L720 using xda app-developers app
Since there are no recovery categories according to this page,
http://forum.xda-developers.com/showthread.php?t=2303917
I don't see where it would matter. No guarantees though.
I do know it is ESSENTIAL to match the type (TW or AOSP) ROM and kernel to avoid major problems.
I also recommend TWRP 2.5.0.2
D/L TWRP from here:
http://techerrata.com/browse/twrp2/jfltespr
ObrienDave said:
Since there are no recovery categories according to this page,
http://forum.xda-developers.com/showthread.php?t=2303917
I don't see where it would matter. No guarantees though.
I do know it is ESSENTIAL to match the type (TW or AOSP) ROM and kernel to avoid major problems.
I also recommend TWRP 2.5.0.2
D/L TWRP from here:
http://techerrata.com/browse/twrp2/jfltespr
Click to expand...
Click to collapse
How do you go about installing TWRP? I used Goomanager and installed it from there when I was following the rooting guide
Spazzzin said:
How do you go about installing TWRP? I used Goomanager and installed it from there when I was following the rooting guide
Click to expand...
Click to collapse
Flashing a different kernel didn't do anything, I still keep getting stuck at the boot logo :/
Spazzzin said:
How do you go about installing TWRP? I used Goomanager and installed it from there when I was following the rooting guide
Click to expand...
Click to collapse
Just flash it by odin by the link provided above. Make sure to use the tar file v 2.5.0.2
Sent from my SPH-L720 using xda app-developers app
---------- Post added at 09:22 PM ---------- Previous post was at 09:19 PM ----------
Spazzzin said:
Flashing a different kernel didn't do anything, I still keep getting stuck at the boot logo :/
Click to expand...
Click to collapse
By the way can you provide the steps and which files you flashing. Also redownload everything could be a bad download. Make sure to download them in computer and transfer them to your sd card
Sent from my SPH-L720 using xda app-developers app
I did a fresh install of the LiquidSmooth ROM and it's not hanging at boot logo whenever I reboot, and everything is working well. I suppose I'll stick with this for a while.
For my steps trying Beanstalk:
Boot into recovery (TWRP 2.6.0.0)
Factory reset;wipe cache/dalvik
Format Data
Factory reset;wipe cache/dalvik
Install ROM + Gapps
Wipe cache/dalvik
Reboot
I then tried doing that exact process, after letting it boot once I rebooted into recovery and flashed KT Kernel and wiped then rebooted and it hung at boot logo.
I did it again but I installed ROM + Gapps + Kernel then wiped then rebooted and it still hung at boot logo.
I'll download and prepare a new install of Beanstalk and give it another try tomorrow. I'll make sure to backup Liquid in case I want to switch back.
Thanks again for the help!
Glad it's working out for you.
If I may ask here; how do I know if a certain kernel is compatible with a ROM? I know to match the version (4.2, 4.3. etc,) and base (AOSP/ TW) but is there anything else specific that I need to watch out for that could cause problems with flashing a kernel on a ROM?
Spazzzin said:
If I may ask here; how do I know if a certain kernel is compatible with a ROM? I know to match the version (4.2, 4.3. etc,) and base (AOSP/ TW) but is there anything else specific that I need to watch out for that could cause problems with flashing a kernel on a ROM?
Click to expand...
Click to collapse
Not really unless the rom dev for some reason doesn't recommend using a certain one. Kernels will act differently for everyone even on the same device with the same rom. Just need to flash them and find out which one works the best for you (battery life, overheating, smoothness, etc).
Always have a backup handy just in case something doesn't work right.
Alright so here's what I did, and how I got to my current situation and what the situation is.
What I did:
Had CM10.2 working fine on my rom. Recovery was TWRP (latest). Decided to flash PAC 4.3 cause I really like that rom. Flashed PAC 4.3. Worked fine, decided I wanted to restore titanium backups. Read in a few places that I needed to flash the SuperSU zip from chainfire. Downloaded the latest version from him and flashed in TWRP. TWRP took a -really- long time to flash the zip. After it finished I restarted the phone Wouldn't get past the samsung screen. Uhhh okay no problem.
I still have access to TWRP right? Yup, Still do. Do a full wipe and flash PAC 4.3 and Gapps. Flash is taking forever again. PAC gives no information at all (none of the usual ASCII artwork or anything). GApps loads the installer script but I get a can not mount /data and can not mount /system error.... Oh ****. Now I'm worried.
Download the PDA file from the sticky in the general section. (I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5) Pop the phone into download mode, and flash the PDA file via odin. Great, everything's going well. It flashes System, Flashes recovery, and everything else. Get a message saying All threads completed, Succeeded 1/failed 0. Awesome Right? No....
Phone restarts, goes into the stock recovery screen while something happens and restarts again. Now the phone's stuck on the samsung screen again. I can still access download mode and still access recovery (stock). When I access stock recovery it says "failed to mount /data (stale NFS file handle).... can't mount /data (stale NFS file handle)... E: failed to mount /data (stale NFS file handle).
Now what?... What can I do to fix this?
**EDIT**: Just did format on /data on stock recovery and it seems to have booted... False alert guys. Soft bricked, but nothing else.
Did you try a factory reset in stock recovery?
Sent from my SGH-M919G using XDA Premium 4 mobile app
Blaze9 said:
Alright so here's what I did, and how I got to my current situation and what the situation is.
What I did:
Had CM10.2 working fine on my rom. Recovery was TWRP (latest). Decided to flash PAC 4.3 cause I really like that rom. Flashed PAC 4.3. Worked fine, decided I wanted to restore titanium backups. Read in a few places that I needed to flash the SuperSU zip from chainfire. Downloaded the latest version from him and flashed in TWRP. TWRP took a -really- long time to flash the zip. After it finished I restarted the phone Wouldn't get past the samsung screen. Uhhh okay no problem.
I still have access to TWRP right? Yup, Still do. Do a full wipe and flash PAC 4.3 and Gapps. Flash is taking forever again. PAC gives no information at all (none of the usual ASCII artwork or anything). GApps loads the installer script but I get a can not mount /data and can not mount /system error.... Oh ****. Now I'm worried.
Download the PDA file from the sticky in the general section. (I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5) Pop the phone into download mode, and flash the PDA file via odin. Great, everything's going well. It flashes System, Flashes recovery, and everything else. Get a message saying All threads completed, Succeeded 1/failed 0. Awesome Right? No....
Phone restarts, goes into the stock recovery screen while something happens and restarts again. Now the phone's stuck on the samsung screen again. I can still access download mode and still access recovery (stock). When I access stock recovery it says "failed to mount /data (stale NFS file handle).... can't mount /data (stale NFS file handle)... E: failed to mount /data (stale NFS file handle).
Now what?... What can I do to fix this?
Click to expand...
Click to collapse
Did you try factory restore / reset in recovery?
Sorry, I forgot to update. The second I posted this I tried to go into the recovery and do a stock wipe. it worked. Thanks for the tip regardless!
I wonder why stock recovery was able to fix it, but TWRP wasn't? I did /data wipes on both recoveries...
goobieracing said:
Did you try a factory reset in stock recovery? Or maybe try odining the pit file also that somewhere on the forum. Maybe your partitions got corrupt flashing some how.
Sent from my SGH-M919G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Odining the PIT file is a bad idea. At best, it will not work, at worst, it will cause a hard brick
A. Regardless of what anyone has said or what ODIN reports, there is no evidence that the PIT files that are pulled from AT&T phones work on any other device than the one it was originally pulled from. Signing issues are to blame.
and
B. Messing with PIT files can hard brick a phone that was only soft bricked. PIT files (when they work) must be accompanied by a firmware files or else no data will be on the phone.
---------- Post added at 02:52 AM ---------- Previous post was at 02:50 AM ----------
Blaze9 said:
Sorry, I forgot to update. The second I posted this I tried to go into the recovery and do a stock wipe. it worked. Thanks for the tip regardless!
I wonder why stock recovery was able to fix it, but TWRP wasn't? I did /data wipes on both recoveries...
Click to expand...
Click to collapse
It sounds like to me you need to do a lot more reading and learning before you do anything else. It has been a well known fact, and widely discussed in the AT&T S4 forums that a factory reset needs to be done after flashing firmware in ODIN in order for the previous data to be wiped from the phone and for it to boot up again.
goobieracing said:
Did you try a factory reset in stock recovery?
Sent from my SGH-M919G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
scott14719 said:
Did you try factory restore / reset in recovery?
Click to expand...
Click to collapse
scott14719 said:
Odining the PIT file is a bad idea. At best, it will not work, at worst, it will cause a hard brick
A. Regardless of what anyone has said or what ODIN reports, there is no evidence that the PIT files that are pulled from AT&T phones work on any other device than the one it was originally pulled from. Signing issues are to blame.
and
B. Messing with PIT files can hard brick a phone that was only soft bricked. PIT files (when they work) must be accompanied by a firmware files or else no data will be on the phone.
---------- Post added at 02:52 AM ---------- Previous post was at 02:50 AM ----------
It sounds like to me you need to do a lot more reading and learning before you do anything else. It has been a well known fact, and widely discussed in the AT&T S4 forums that a factory reset needs to be done after flashing firmware in ODIN in order for the previous data to be wiped from the phone and for it to boot up again.
Click to expand...
Click to collapse
Ah, I never had to use ODIN on the S4 before. Didn't know that. On my S2 I didn't have to wipe after flashing via ODIN.
Good to know, anyway. Thanks.
Blaze9 said:
Sorry, I forgot to update. The second I posted this I tried to go into the recovery and do a stock wipe. it worked. Thanks for the tip regardless!
I wonder why stock recovery was able to fix it, but TWRP wasn't? I did /data wipes on both recoveries...
Click to expand...
Click to collapse
I had to do a stock reset recovery the other day for something like this. Probably just left over files from previous stopping it from booting.
scott14719 said:
Odining the PIT file is a bad idea. At best, it will not work, at worst, it will cause a hard brick
A. Regardless of what anyone has said or what ODIN reports, there is no evidence that the PIT files that are pulled from AT&T phones work on any other device than the one it was originally pulled from. Signing issues are to blame.
and
B. Messing with PIT files can hard brick a phone that was only soft bricked. PIT files (when they work) must be accompanied by a firmware files or else no data will be on the phone.
Click to expand...
Click to collapse
Sorry I learned something new today. Back in the infuse 4g days whenever I'd odined back to stock I always used the pit. I was under the influence that set everything up the way it came stock. Hope to see some of your work coming to sthe s4. Maybe you help the sense port going on in the international thread lol. Not trying to add work to ur day but I OK know if u, jt, and entropy can bring ICS to a out dated phone u might have the skills to ad your 2 cent.
Sent from my SGH-M919G using XDA Premium 4 mobile app
---------- Post added at 02:18 AM ---------- Previous post was at 02:01 AM ----------
Blaze9 said:
Ah, I never had to use ODIN on the S4 before. Didn't know that. On my S2 I didn't have to wipe after flashing via ODIN.
Good to know, anyway. Thanks.
Click to expand...
Click to collapse
I had to Odin to stock the first time two days agao but mine booted and I only had stock recovery. When it started up the ROM everything was crashing and that's what fixed it. Glad you fixed it though.
Sent from my SGH-M919G using XDA Premium 4 mobile app
Pretty much got the same problem. Seems that somehow my device encrypted itself and since I didn't know...I don't have a password to give it. So I got a encrypted device that can't be decrypted, thus, I can't format, install, wipe, etc. Not sure if you got the same, but mine is about the same symptoms.
But is it ok to flash "I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5" on mine? Kinda confused with all this MDL, MDB, and MF3 stuff. Mine was an MDL. So is flashing MDB stock ok anyway? Or should I find the stock for MDL?
EDIT: Just flashed MDL stock anyway. Worked fine and now I'm starting from scratch. No more problems so far. I might stay away from TWRP for a bit now though. Surprised there isn't a guide or warning for this problem though.
gerard0986 said:
Pretty much got the same problem. Seems that somehow my device encrypted itself and since I didn't know...I don't have a password to give it. So I got a encrypted device that can't be decrypted, thus, I can't format, install, wipe, etc. Not sure if you got the same, but mine is about the same symptoms.
But is it ok to flash "I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5" on mine? Kinda confused with all this MDL, MDB, and MF3 stuff. Mine was an MDL. So is flashing MDB stock ok anyway? Or should I find the stock for MDL?
EDIT: Just flashed MDL stock anyway. Worked fine and now I'm starting from scratch. No more problems so far. I might stay away from TWRP for a bit now though. Surprised there isn't a guide or warning for this problem though.
Click to expand...
Click to collapse
The PW TWRP asks for? IT's just TWRP, if I remember correctly.
Hey guys, I am not new to this scene and have been running, flashing, roms since the S2. Today I ran into a major problem I cant seem to fix. I am running TWRP 2.5.0.2, always have for about 4 months with no issues. Today I did a complete Titanium Backup + recovery backup of my rom. After that I wiped for a fresh new rom install and noticed the rom I placed onto my internal storage is not there (it was def there in its own folder but through TWRP its not there). No biggie right? Just mount USB storage and put it somewhere else that TWRP can get to, but then USB wont mount on Windows now. No biggie right? Ill just restore the rom, put it in another directory, then wipe and reflash. However none of my backups are showing up when I hit restore, I had like 3 backups and everything is gone.
At this point what do I do? I tried everything to mount usb from recovery but windows wont take it (win 7). Any help would be appreciated, thanks.
doesntmatterx said:
Hey guys, I am not new to this scene and have been running, flashing, roms since the S2. Today I ran into a major problem I cant seem to fix. I am running TWRP 2.5.0.2, always have for about 4 months with no issues. Today I did a complete Titanium Backup + recovery backup of my rom. After that I wiped for a fresh new rom install and noticed the rom I placed onto my internal storage is not there (it was def there in its own folder but through TWRP its not there). No biggie right? Just mount USB storage and put it somewhere else that TWRP can get to, but then USB wont mount on Windows now. No biggie right? Ill just restore the rom, put it in another directory, then wipe and reflash. However none of my backups are showing up when I hit restore, I had like 3 backups and everything is gone.
At this point what do I do? I tried everything to mount usb from recovery but windows wont take it (win 7). Any help would be appreciated, thanks.
Click to expand...
Click to collapse
Nevermind guys I was able to get around it by putting the SD card from my S4 into the S2 and putting the rom files into another location. Once that was done placed it back into the S4, booted into recovery and flashed it. (phew!)
doesntmatterx said:
Nevermind guys I was able to get around it by putting the SD card from my S4 into the S2 and putting the rom files into another location. Once that was done placed it back into the S4, booted into recovery and flashed it. (phew!)
Click to expand...
Click to collapse
:good:
xBeerdroiDx said:
:good:
Click to expand...
Click to collapse
I take it back, stuck in a boot loop even after 2 fresh ODIN unroot tasks. Nothing I do gets me out of this, been a long day getting longer now
Can anyone help? Been at it for hours, I have tried everything, phone still reboots at the Samsung logo (the bluish one )
Unrooted 3 times
Launched stock recovery, wiped factory reset
wiped partition cache
removed battery
Cannot connect to Kies for Emergency restore.
Did you do an internal 'sd card'/media data wipe?
Best bet would be to Odin back to stock and start from scratch:
http://forum.xda-developers.com/showthread.php?t=2261573
Then from there just use casual to root and install TWRP in one easy step and you're back:
http://forum.xda-developers.com/showthread.php?t=2297900
seanpr123 said:
Did you do an internal 'sd card'/media data wipe?
Best bet would be to Odin back to stock and start from scratch:
http://forum.xda-developers.com/showthread.php?t=2261573
Then from there just use casual to root and install TWRP in one easy step and you're back:
http://forum.xda-developers.com/showthread.php?t=2297900
Click to expand...
Click to collapse
I know what I did, I was using Touchwiz and instead of doing a regular wipe I did a format and input "YES". I heard TW has major issues with this and thus screwed me up completely.
To add to my list above I tried this method and also did not work. http://androidfannetwork.com/2013/05/02/fix-your-soft-bricked-att-samsung-galaxy-s4/
Sean, I flashed from Odin like 3 times, how can I install TWRP if I cant get the phone to load up (boot loop)- Ill read up on casual. Thanks.
doesntmatterx said:
I know what I did, I was using Touchwiz and instead of doing a regular wipe I did a format and input "YES". I heard TW has major issues with this and thus screwed me up completely.
To add to my list above I tried this method and also did not work. http://androidfannetwork.com/2013/05/02/fix-your-soft-bricked-att-samsung-galaxy-s4/
Sean, I flashed from Odin like 3 times, how can I install TWRP if I cant get the phone to load up (boot loop)- Ill read up on casual. Thanks.
Click to expand...
Click to collapse
Did you do a factory reset in the stock recovery after Odin? That'll usually get you past the boot loop.
Should I ODIN with the RE-Partition Option?
Just Odined again and no dice. I booted into stock recovery and noticed after wiping factory I get "Can't open /efs/log/boot_cause" which pointed me to this fix someone on the Galaxy note forum said they did and it worked but I dont understand the steps, need some elaboration.
http://forum.xda-developers.com/showpost.php?p=39523753&postcount=4
jd1639 said:
Did you do a factory reset in the stock recovery after Odin? That'll usually get you past the boot loop.
Click to expand...
Click to collapse
Yep did that mulitple times, also did wipe cache partition in the same stock recovery. I get to the Samsung logo where the blue halo spins around the name, then it freezes there and reboots.
Hmm, never had to mess with EFS stuff on our phones before.
Did you make a backup ever in TWRP by chance?
Sorry if you tried the stock recovery options there's not much more I'm familiar with.
The good news is since you were able to Odin and get 3e back, you are technically warrantied again and could work with AT&T to get a new phone since your phone just stopped working out of the blue one day
seanpr123 said:
Hmm, never had to mess with EFS stuff on our phones before.
Did you make a backup ever in TWRP by chance?
Sorry if you tried the stock recovery options there's not much more I'm familiar with.
The good news is since you were able to Odin and get 3e back, you are technically warrantied again and could work with AT&T to get a new phone since your phone just stopped working out of the blue one day
Click to expand...
Click to collapse
LOL thanks, yes I may have to do that. I had a backup and it was wiped.
Anyone have any suggestions at all? I can't be the only one who has had this boot-loop / partition problem without a fix... or maybe I am lol.
doesntmatterx said:
Anyone have any suggestions at all? I can't be the only one who has had this boot-loop / partition problem without a fix... or maybe I am lol.
Click to expand...
Click to collapse
Try flashing using cwm. It'll probably work fine. Then you can go back to twrp. That's worked on other devices. Seems one you flash it once with cwm then twrp works from that point forward. Idk why
doesntmatterx said:
Anyone have any suggestions at all? I can't be the only one who has had this boot-loop / partition problem without a fix... or maybe I am lol.
Click to expand...
Click to collapse
Did your odin flashes include the pit files ? Have you tried flashing twrp or cwm with odin?
Sent from my SCH-I545 using xda app-developers app
jds3118 said:
Did your odin flashes include the pit files ? Have you tried flashing twrp or cwm with odin?
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
I tried flashing with a PIT file I found online but it fails through ODIN everytime. I tried on multiple versions of ODIN as well. I also cant seem to find readily available PIT files to test as well, (perhaps the one I used does not work). Also I did try to flash a CWM through ODIN but failed, but again there isnt anything that I have read that says "hey you can do this that way and it will work".
From what I understand I need to be rooted to install CWM or TWRP, and since I unrooted to try and fix the problem I cannot root myself through conventional methods. Everything I found online requires the phone to completely start up. (to the menu screen etc)
What stock firmware are you flashing with odin? I get firmware from sammobile.com. since you had a custom recovery I'm guessing you where on mdl firmware to start with.
jd1639 said:
What stock firmware are you flashing with odin? I get firmware from sammobile.com. since you had a custom recovery I'm guessing you where on mdl firmware to start with.
Click to expand...
Click to collapse
I never flashed a custom recovery through Odin < I can try that though, where can I get one? Im assuming this firmware will have root with CWM or TWRP?
Ive only flashed using official Samsung firmware from sammobile.com I tried both that are available for SGH-I337 with the PIT file as well and no dice.
doesntmatterx said:
I never flashed a custom recovery through Odin < I can try that though, where can I get one? Im assuming this firmware will have root with CWM or TWRP?
Ive only flashed using official Samsung firmware from sammobile.com I tried both that are available for SGH-I337 with the PIT file as well and no dice.
Click to expand...
Click to collapse
Do you know what firmware you were on? Was it mdl or mf3?
So yesterday I flashed TWRP instead of CWM and later on I tried to wipe the cache/dalvik but screwed up and accidentally ran a factory reset. No big deal I have a recovery I can use... well... TWRP can't use CWM recoveries. okay... we'll just flash CWM back on.
That's where the problem comes in no matter how many times or how I flash CWM it always goes into TWRP I've flashed using ODIN 3.07, 3.09 and using ROM manager on my phone.
What do I have to do to force CWM to flash?
aphoticinullity said:
So yesterday I flashed TWRP instead of CWM and later on I tried to wipe the cache/dalvik but screwed up and accidentally ran a factory reset. No big deal I have a recovery I can use... well... TWRP can't use CWM recoveries. okay... we'll just flash CWM back on.
That's where the problem comes in no matter how many times or how I flash CWM it always goes into TWRP I've flashed using ODIN 3.07, 3.09 and using ROM manager on my phone.
What do I have to do to force CWM to flash?
Click to expand...
Click to collapse
You might need to find a flashable zip form of it.
Sent from my SGH-I337 running BlackBox 3.0
DeadlySin9 said:
You might need to find a flashable zip form of it.
Sent from my SGH-I337 running BlackBox 3.0
Click to expand...
Click to collapse
thank you! got it!
for future people, here is what I used
http://forum.xda-developers.com/showthread.php?t=2322682