Hello all,
I'm having a weird problem today my radio isn't working with PA, I factory reset my phone and the radio works, but once I flash PA I breaks, I tried re flashing the radio without success my current radio is .84.
Any ideas ?
Thanks
Adriem said:
Hello all,
I'm having a weird problem today my radio isn't working with PA, I factory reset my phone and the radio works, but once I flash PA I breaks, I tried re flashing the radio without success my current radio is .84.
Any ideas ?
Thanks
Click to expand...
Click to collapse
What do you mean it breaks? What happens?
Sorry.
I mean no baseband, no imei, no Sim card detected.
Adriem said:
Sorry.
I mean no baseband, no imei, no Sim card detected.
Click to expand...
Click to collapse
Hi, I'm also having the same issue and would love to see a fix!
If I return the Nexus 4 to stock, I get a signal and everything works. As soon as I flash PA it takes longer than usual to boot and I have no signal and get Baseband Unavailable.
Does anybody know what the issue could be?
Thanks in advance
Hello,
First thanks, I feel better now that I know somebody has the same problem
Here is what I have done :
- I wanted to downgrade from 3.99 RC2 to 3.99 because of stability issues
- No baseband in 3.99
- After an error of me : bootloop
- Factory Reset : Baseband
- Update to 3.99 (Normal, RC1 or RC2): No baseband
The fact that the rom affects the baseband really blows my mind, I'm going to try downgrade my baseband later today and see the results, I might also try other roms.
I hope you will post your solutions If you find some, I'll do my best researching.
Cya.
Are you trying to flash PA with CWM recovery or TWRP? There is a known issue with CWM that it could break your baseband.
CWM ... Dang if it is it, you will be my god, and I will never use it again, I caused me such a headache ...
Try flashing with TWRP, i never had such problems with it.
I'm definitely gonna try.
What makes me doubt though is that I also tried to flash cm and no baseband problems at all ...
EDIT : After flashing PA 3.99 (Non RC) with TWRP, it worked.
CWM was definitely the problem. Thank you guys for your help Have a nice day.
Related
okay i dont know what happened. i am just flashing through v20a then changed back to cm. but when i came back to cm i figured out that my phone couldnt detect my network so i checked my about phone and i think heres the problem:
baseband version: RRO
IMEI : unknown
IMEI SV: unknown
im currently using cm10 mar.24 build though i tried flashing to and older build of mar.06 but still the same. i tried restoring my backup of stockrom though the baseband version looks normal still it couldnt detect my network. anybody who has the same problem and solved? :S
Going back to V10 or CM after flashing V20
.buko said:
okay i dont know what happened. i am just flashing through v20a then changed back to cm. but when i came back to cm i figured out that my phone couldnt detect my network so i checked my about phone and i think heres the problem:
baseband version: RRO
IMEI : unknown
IMEI SV: unknown
im currently using cm10 mar.24 build though i tried flashing to and older build of mar.06 but still the same. i tried restoring my backup of stockrom though the baseband version looks normal still it couldnt detect my network. anybody who has the same problem and solved? :S
Click to expand...
Click to collapse
hey there, unfortunately i had the exact same problem u have. the solution comes from Flashing special kdz. u´ll find it on "[L7]Discussion thread for Official CM10 Nightlies" post "#333" (pag 34) ...
ps: thats my very first post, so i figured i wouldnt be able to post direct links. hope it helps you.
So, here I am trying to upgrade my phone to 4.3 and I installed Slimbean, CM 10.2 (or something along those lines) and AvatarROM and every single ROM based on CM (or maybe 4.3 in general) has an issue related to the touchscreen. The touch is basically not working. I've tried a lot of KDZs and none of them seems to do the trick. I've tried Slimbean and the touch isn't working, only the physical keys. I've noticed that if I flash to v10 baseband, I can get the touch to work, but it seems that I cannot use my SIM card. I saw that a lonely few other users cannot get this to work, but this is a problem with the ROM or version in general, it is very common.
So guys, can anyone help me? I've seem to have gotten this modding thing down in general, but this is the first time I'm having issues. I am prepared to give all the nececery data in order for this to be fixed, but that is all I know for now.
TL;DR Newest 4.3 CyanogenMod based ROMs touch not working with v20 baseband, only with v10 baseband. On the other hand with v10 baseband, the SIM isn't working and I don't want to use my phone as a tablet.
Thanks in advance, guys.
EDIT: THE ANSWER IS THAT V10/V20 baseband thing! I can feel it!
Do you flash it with a SIM in it? And with a microSD inserted too?
And first startup with thosse too
yes, indeed I did.
EDIT: One more question that I need answered. Do I need v10 or v20 in order for me to have Slimbean or CM 10.2?
soMVD said:
EDIT: One more question that I need answered. Do I need v10 or v20 in order for me to have Slimbean or CM 10.2?
Click to expand...
Click to collapse
You need v20
Do a boot without flashing gapps... Test and then flash gapps ....
Also did you try lock phone and unlock to test touch?
Sent from my LG-E610 using Tapatalk
I did try without gapps and it didn't help. The touch is still not working. Only the physical buttons are working (volume+, -, power and home). I tried a bunch of different solutions, but none of them seems to work. I have V20 on my phone (updated with the KDZ tool).
After I install the rom, I install v20 baseband and I get the SIM thing to enter the PIN but the touch ain't working. If I flash the V10 baseband after the ROM installation I get the touch working, but I can't use my SIM card and I don't want to use my phone as a tablet.
What is the exact model of yours?
How did you unlock bootloader / install cwm? Did you check that is for YOUR version?
raul338 said:
What is the exact model of yours?
How did you unlock bootloader / install cwm? Did you check that is for YOUR version?
Click to expand...
Click to collapse
on the back of mt phone it says E610/E612F
So, yes. It is for my version.
Hello everybody,
i just put the a custom rom for the first time and i am actually really happy with this rom.
My friend called me 1h ago, so i noticed that i am hearing my friend fine, but the problem is that he cant hear me.
I tested it with the audio capture and it just sound messy.
Here are all the information:
Omega v33 - XXUGNF1
Android Version 4.4.2
Modellnummer: GT-19505 Black Edition
Basisbandversion I9505XXUGNF1
Kernel:3.4.0-talexop-2+-gb4fe160-dirty
[email protected]#4
I just tried it with the 3.4.0-Adam-2.3, but it is not working, too.
Did i install something wrong?
So which kernel is the right one for me to get the sound problem fixed?
varity said:
Hello everybody,
i just put the a custom rom for the first time and i am actually really happy with this rom.
My friend called me 1h ago, so i noticed that i am hearing my friend fine, but the problem is that he cant hear me.
I tested it with the audio capture and it just sound messy.
Here are all the information:
Omega v33 - XXUGNF1
Android Version 4.4.2
Modellnummer: GT-19505 Black Edition
Basisbandversion I9505XXUGNF1
Kernel:3.4.0-talexop-2+-gb4fe160-dirty
[email protected]#4
I just tried it with the 3.4.0-Adam-2.3, but it is not working, too.
Did i install something wrong?
So which kernel is the right one for me to get the sound problem fixed?
Click to expand...
Click to collapse
Hi ,
That problem most of the times is modem related , go Omega files /modem flash the same one again or upgrade it to the newest , follow instructions to do it
As shown in OP of Omega V33
Installation:
1. Backup your device (nadroid backup, titanium backup, efs backup ... etc) and save the backup to a safe place.
2. Flash the new bootloder and modems with odin
Bootloader -> BL_I9505XXUFNAD_481100_REV06_user_low_ship_MULTI_C ERT.tar.md5
If you already have the new Kit Kat bootloader there is no need to flash it again.
Modems XXUFNC9 -> I9505XXUFNC9_GSM_LTE_Modems.tar
Power off device completely, then boot to download mode and flash bootloader (if needed) and modems with odin
Then boot to android and check if the new modem XXUFNC9 flashed ok (if wifi is not working is normal)
3. Boot to Recovery --recommended TWRP, get the latest version from here -> http://teamw.in/project/twrp2/182--
and flash Omega and then boot to android.
You can flash without full wipe if you are coming from a previous Omega Kit Kat version, if not then flash with full wipe
PLEASE FOLLOW THE EASY INSTALLATION INSTRUCTIONS ELSE YOU WILL HAVE VARIOUS ISSUES!
BACKUP FIRST !!
I flashed the LTE_Modem_I9595XXUGNF1 again, but it is still the same problem.
Can i test an older one without any problems, or do you know anything else to solve my problem?
varity said:
I flashed the LTE_Modem_I9595XXUGNF1 again, but it is still the same problem.
Can i test an older one without any problems, or do you know anything else to solve my problem?
Click to expand...
Click to collapse
Mate ,
You have a I9505 or a I9595??
MAX 404 said:
Mate ,
You have a I9505 or a I9595??
Click to expand...
Click to collapse
pardon mistyped. I9505 is the right one.
varity said:
pardon mistyped. I9505 is the right one.
Click to expand...
Click to collapse
You can try with an older one if you wish and see if it helps , did you flash the GSM modem also?
MAX 404 said:
You can try with an older one if you wish and see if it helps , did you flash the GSM modem also?
Click to expand...
Click to collapse
Yes i installed both. I will try some of the LTE/GSM modems now.
I still have the microphone issue.
I Updated the baseband (GSM+LTE) to the newest I9505XXUGNF1, but i cant fix this microphone problem. It sounds like it is raining or something like the television where u cant get a programm.
I searched now about 5hours, but this is something i cant get fixed.
Please anyone here who can help with this issue?
I've been using cyanogen 11 nightly. I need my GPS for work.It will never lock, tried some quick GPS fixes, no avail. Tried to downkick to CM 10.2, either fail flash or loads forever, so can't downgrade. Anyways tried some 4.4 ROMs all have GPS bugs so I figure it is my modem just wanted some advice before upgrade, don't want brick my network.
I have
VS98012B M8974A-AAAANAZM-1.0.190050
Will upgrade to
VS98024A M8974A-AAAANAZM-2.0.20046
Will this fix my problem? And are these the correct files?
forum.xda-developers.com/showthread.php?t=2451426
Thanks for your time.
Xaeias said:
I've been using cyanogen 11 nightly. I need my GPS for work.It will never lock, tried some quick GPS fixes, no avail. Tried to downkick to CM 10.2, either fail flash or loads forever, so can't downgrade. Anyways tried some 4.4 ROMs all have GPS bugs so I figure it is my modem just wanted some advice before upgrade, don't want brick my network.
I have
VS98012B M8974A-AAAANAZM-1.0.190050
Will upgrade to
VS98024A M8974A-AAAANAZM-2.0.20046
Will this fix my problem? And are these the correct files?
forum.xda-developers.com/showthread.php?t=2451426
Thanks for your time.
Click to expand...
Click to collapse
Nobody can answer whether will it fix your problem or not, but it won't break your phone. I think you should go for it.
Hello there everyone,
I'm new here (mainly registered just to ask since no-one could help) and in need of some help.
I have a samsung galaxy GT-I9500 and I cannot upgrade above 4.4.2.
When flashing an AOSP roms or roms above 4.4.2 (eg. 4.4.4) my device seem to lose it signal in for of:
Baseband Unknown and Null IMEI.
I have tried flashing different modems and kernels with no effect, The only thing that seem to work is flashing stock 4.4.2.
Currently i'm on stock:
PDA: I9500XXUGNH4
CSC: I9500OJKGNI1
MODEM: I9500JKUGNH1
*I think the problem might be a the EFS partition formatting getting wrong partitioning (Again I have no technical idea what-so-ever)
Any help will be appreciated :^)
Thanks in advance,
Old Geezer
Old_Geezer said:
Hello there everyone,
I'm new here (mainly registered just to ask since no-one could help) and in need of some help.
I have a samsung galaxy GT-I9500 and I cannot upgrade above 4.4.2.
When flashing an AOSP roms or roms above 4.4.2 (eg. 4.4.4) my device seem to lose it signal in for of:
Baseband Unknown and Null IMEI.
I have tried flashing different modems and kernels with no effect, The only thing that seem to work is flashing stock 4.4.2.
Currently i'm on stock:
PDA: I9500XXUGNH4
CSC: I9500OJKGNI1
MODEM: I9500JKUGNH1
*I think the problem might be a the EFS partition formatting getting wrong partitioning (Again I have no technical idea what-so-ever)
Any help will be appreciated :^)
Thanks in advance,
Old Geezer
Click to expand...
Click to collapse
Maybe this problem is caused by an old recovery? How are you installing custom ROMs? Throug recovery? And if yes, which one are you using?
Tkkg1994 said:
Maybe this problem is caused by an old recovery? How are you installing custom ROMs? Throug recovery? And if yes, which one are you using?
Click to expand...
Click to collapse
I install roms thrugh Philz touch recovery and I make sure to erase everything (eg. cache system data etc.)
When checking my efs folder though I got bunch of files no Idea if they need to be there or not lol...
If on stock rom it works, then your partition is fine. Stay away from the /efs folder.
Try a different recovery / update your recovery. Try changing the modem.
If it still doesn't work then it's probably a bug in the rom.
Lennyz1988 said:
If on stock rom it works, then your partition is fine. Stay away from the /efs folder.
Try a different recovery / update your recovery. Try changing the modem.
If it still doesn't work then it's probably a bug in the rom.
Click to expand...
Click to collapse
I can't flash ANY 4.4.4 roms I don't talk about specific one, and as I mentioned I tried changing to all available modems.
As for recovery I use the latest philz touch and in TWRP it won't work either.
So it not the recovery fault.
Old_Geezer said:
I can't flash ANY 4.4.4 roms I don't talk about specific one, and as I mentioned I tried changing to all available modems.
As for recovery I use the latest philz touch and in TWRP it won't work either.
So it not the recovery fault.
Click to expand...
Click to collapse
That's because ANY 4.4.4 is based on CM. So if it's a bug in CM, then ANY 4.4.4 will have that bug.
You could try some older builds from CM and see if they work.
Lennyz1988 said:
That's because ANY 4.4.4 is based on CM. So if it's a bug in CM, then ANY 4.4.4 will have that bug.
You could try some older builds from CM and see if they work.
Click to expand...
Click to collapse
I saw other people with I9500 being able to flash those roms just fine, could it be MY phone have the problem in particular and if so what might it be..?