Related
Overclocking, underclocking, managing performance, tempoerature, speed, and battery life - for any Droid X phones with gingerbread - and special thanks to all those who are mentioned below and created the programs below as well as links with explanations - and anyone have any corrections and/or other ideas?
The below document has four sections:
A. Simplified - overall concept on the biggest speed bosster - steps A1-A9
B. Simplified "Details" with links to deeper information - the above steps in "A" restated (as B1-B9) how to actually do those steps with links to full details and where to get the files required for each step.
C. Pieces of "must have" software
D. Additional Tips for further porformance increases - some of these make a BIG difference!
- - - -
A. Simplified - overall concept (steps A1-A9):
A1. If you have not yet upgraded your phone, then do so Over The Air (OTA) from your carrier so the carrier has you listed in their records as you having upgraded to the latest ROM (otherwise they may send you reminders or try to upgrade your phone in the background, etc.)
A2. Gingerbread (2.3.3) CANNOT be rooted, you have to root Froyo (2.2.1) so you need to downgrade your phone to that version of the stock ROM FIRST.
A3. Then reboot - and to be able to make phone calls you will be walked through one simple phone call by an automated system from your phone carrier to re-enable your phone to make phone calls with your account. Completely automated by the phone company, no live person on the other end.
A4. Gain superuser (unfettered) access to your phone. "Root" it.
A5. Take steps and install software to set up your phone to be able to upgrade to the newest android "gingerbread" version WITHOUT loosing the root - just doing a plain upgrade you will lose the root.
A6. Then upgrade from rooted Froyo (2.2.1) to Gingerbread (2.3.3) as in B6 below. Note, you can ONLY overclock your phone (using easily found and easily useable software on the market) if you are using a stock ROM that is overclocked - that specific kernel is required besause the overclocking software changes values at specific addresses in the kernel's memory (custom ROMs often have different memory addresses for the overclock settings so the software for overclocking would not work).
A7. The Droid X stock Kernel is designed to only run at 4 specific speeds, but you can set what they are (and the voltages for each) with another piece of software. I use "Android Overclocker" for this. Details below under B7.
A8. Software which allows you to manage what speed is used and when is different from the software that assigned the 4 levels of CPU speed set in the previous step. You want to be able to to set which CPU speeds (frequencies) are used and under which circumstances (CPU load, whether the screen is off, whether or not the phone is above a certain temperature, etc.). My opinion is that SetCPU is the best software for this. Details are below under B8.
- - - -
B. Simplified "Details" with links to deeper information - the above steps restated but how to actually do it with links to full details and the files required for each step:
B1. (as in A1 above): Self Explanatory.
B2. (as in A2 above): Gingerbread (2.3.3) CANNOT be rooted, you have to root Froyo (2.2.1 is used here with the above files), so you have to SBF back to Froyo and root THAT first. So to downgrade from Gingerbread (version 2.3.3 - either rooted with leaked ROM or not, it does not matter) to Froyo (2.2.1) as instructed in this link, http://www.lancelhoff.com/downgrade-gingerbread-to-froyo/). I had to do this using RSDLite - and maybe you should too - the other way is to create a Linux Disc - I built my PC on my own and the Linux disc could not deal with the custom PC components (for instance it would not recognize my PCI cards, and came up with other weird error messages, etc.). When using RSDLite there is a bug in that program mentioned as specified in the link above. (Note: to get around that bug, after you try to load the ROM file and it does not load as specified in the log file as mentioned in the above link - leave the RSDListe program running on your PC when you look at the log - just make a copy of the ROM file as specified in the detailed instructions WHILE RSDLITE IS RUNNING) - and switch the program to using the renamed ROM file - and it will then work like a charm). This link should help as well: "http://www.droidxforums.com/forum/droid-x-sbf/23638-linux-solution-your-windows-rsd-lite-problems.html".
B3. (as in A3 above): Self Explanatory - HOWEVER - DO NOT, DO NOT, put your google userid and password into the phone when it first boots up because automatic upgdates which are totally unecessary will take place with your phone (your contact data from the cloud, etc) which will complicate and slow down the process) and are totally unecessary at this point.
B4. (as in A4 above): You need to allow unfettered superuser access to your phone. To do this, use the files from "http://www.lancelhoff.com/how-to-root-droid-x/" for detailed guidance, root your phone as instructed (using z4root v.1.3.0) as it is now the Froyo (2.2.1 version) and can be rooted.
B5. (as in A5 above): To allow a rooted upgrade of your phone to a newer ROM to Gingerbread (2.3.3) that remains rooted - special steps need to be taken (using any stock ROM with the regular method will 'unroot' your phone so you lose the root). You must us a stock ROM or you will not be able to overlcok your phone. Use the files from this link (http://www.droid-life.com/2011/05/28/download-official-droidx-gingerbread-4-5-596-for-rooted-users/) - and only pay attention to the section entitled "Instructions (running Froyo):". For detailed guidance, bootstrap your phone using "droid 2 bootstrap" (dropid2bootstrap.apk) - notice, DO NOT use any "droid x bootstrap" (droid x bootstrap even for droid x phones often does NOT work with the newer Gingerbread ROM). Also, when moving the two zip files onto your sdcard, rename "Blur_Version.2.3.340.MB810.US-Part1.zip" to "1Blur_Version.2.3.340.MB810.US-Part1.zip" and rename "Blur_Version.2.3.340.MB810.US-Part2.zip" to "2Blur_Version.2.3.340.MB810.US-Part2.zip" (putting the 1 and 2 in front of each file name) or else you will not be able to tell which is which when you are installing them - the screen on the handheld does not show the entire file name - (and they have to be installed in the proper order).
B6. (as in A6 above): Upgrade from rooted Froyo (2.2.1) to Gingerbread (2.3.3) using the files and instructions as shown in this youtube video: "http://youtu.be/bedGIM6pL0E" For more details on all the steps shown in B2-B5 and A2-A5 here is a link showing the earlier parts of the process. Pay special attention to the section where the DROID2BOOTSTRAP program is run, which is what you are doing here for step B6.
B7. (as in A7 above): Android Overclock - to set the speeds allowed for the CPU to run at... The lowest speed that can be set is 300MHZm but the sky is the limit for the highest speed (typically alot of phones become unstable if you set the highest speed to anything above 1250MHZ (1.25GHZ). (The CPU in the Droid X has a normal max of 1000MHZ (1GHZ).) Software I have checked out for this is "Milestone Overclock" which is updated regularly (but did not have the user-friendly level of functionality granularity that I wanted - you could only set the Max level unless you wanted to do some low-level hacking which is a pain).). Another one was "D2 / DX Overclocker" which has more functionality but had not been updated for a long time so users are complaining of support issues. The third and last (which I use) is called "Android Overclocker" which allows you to set the MHZ and voltage for each of the four "slots" (speeds) used by the Kernel for the overclocking. I set up my speeds as 300000 with the voltage - "vsel" value set to 33, then 600000 with vsel of 56, then 9000000 with vsel of 66, and 12500000 with vsel of 80.
B8. (as in A8 above): SetCPU - only used for managing the speeds already available, not specifying what they are. For SetCPU to understand what the four speeds are for that CPU, put a file called SetCPU.txt in the root directory of your sdcard as specified in the instructions for the SetCPU application. The full text of this file is one line with nothing but:
300000,6000000,9000000,1250000
Note, this tool is great for stopping my phone from overheating and to manage the speed properly. With no specific profiles I noticed my phone was ready to melt when it was busy, so I got involved with the profiles. I have only one profile which seems to make everything run really well - it handles the following (read the directions within the application for more details and instructions):
* When screen is off, set speed to min of 300MHZ and max of 300MHZ.
* When battery is less than 3% remaining, min speed of 300 and max speed of 600.
* When temperature is > 52 degress centigrade, min speed = 300 and max speed = 900
* When temperature is > 60 degress centigrade, min speed = 300 and max speed = 600
* When charging, min = 300 and max = 1250 (may be unecessary as that is already my 'default')
- - - -
C. Pieces of "must have" software for your phone with regards to carefully monitoring the temperature and maximizing the performance as well as battery life -
"Temp Monitor" - shows temperature on top barets alarms for temperature warnings.
"Juice Defender" - outstanding software for maximizing your battery.
"AutoKiller Memory Optimizer" - software which is outstanding for managing your memory.
"AnTuTu Benchmark" - for benchmarking your phone
"Root Explorer" - for navigating ALL directories on your phone (and creating/editing text files, etc.)
"SuperBox Pro" - for moving as many applications as possible to you SDcard to save memory - and a toolbox of other good apps.
"Eray" - for deep analysis of your phone's processes, etc. Also has a great widget to put a huge number of switches (wifi, etc) into ne widget on one screen.
"SeePU++" - for showing CPU load and RAM usage realtime in the top bar.
"WidgetLocker" - for replacing the login screen on your phone - and also to alloow you to use the follwogin program to put your name and home phone number on your main lock screen (in case your phone is lost):
"Banner" (see widgetlocker above)
"Widgetsoid" - very granular control over setting up your own widgets, also allows you to put a bunch of switches accessable from your drop-down menu - so you don't have to go away from other programs to for example, turn on your wifi, etc.
"Folder Organizer" - lets you assign one or more custom categories to apps and then you can put shortcuts on your screens to those categories to get a popup window of icons for all the associate apps. As you uninstall and install different apps this will allow yo0u to automatically keep the links on your screens to those apps up to date without going out of your mind.
"Launcher Pro" - Seems to be the quickest and most stable launcher / home screen replacement with extended functionality. "SPB Shell 3D" has the slickes interface I have ever seen for this - but it is at the expense of being a resource and CPU hog and slowing your phone down. "ADW Launcher" I tried also but that seemed to crash pretty often - and also was slower than "Launcher Pro". (NOTE THE SECOND TIP BELOW IN SECTION D.)
"Pulse" - for news - also there a a million of those news apps, CNN, etc. (I noticed CNN launches backfround processes without telling me which I do not like though).
"Fancy Widgets" - Outstanding clock/weather widget for main home screen.
I could go on and on... !
- - -
D. Additional Tips for further porformance increases - some of these make a BIG difference!
Use the "SetCPU" widget instead of the "Android Overclocker" widget in my opinion - uses less screen real estate (both verify your overclocking/underclocking is running as expected)).
When installing a launcher over your generic android home screen setup, first DELETE all the widgets on the default home screen before installing the launcher. I was not originally aware of this but those widgets on the old generic android screens are all running in the background although you have them all vovered up by your own different launcher. Even before I did any overclocking I noticed a very big difference in performance when I got rid of all those hidden unused running widgets.
Go into the Amazon Marketplace and start using it. They have a free (different) application every day (which are normally paid applications but you can get them free!). I look at this every day and sometimes do not install the application of the day but often do. If there is an app there you want but you don't want to install it, Install it anyway and then uninstall it. Then you could install it later for free when you are ready (instead of paying for it then).
There also is an Amazon MP3 store which has a free song of the day as well (although I have not used that very much - it seems the soongs are never hits that I like).
Thanks for istening to my diatribe - and anyone have any corrections/additions/suggestions? DeOdexed - ? Any other ideas?
Update to Gingerbread (to fix gingerbread bugs) pushed from Verizon...
Starting today there are messages on my phone with a countdown timer asking for permission to give me an update to gingerbread. If I do not respond, it installs anyway.
My research Finds it does fix some bugs but also removes the rooting, disables google maps, and may put other software and restrictions on your phone that you do not want.
However, I think I found a work around. There is news that a clockwork mod does not have this issue - but I had no backup so I bought titanium backup plus. in titanium backup just go and the application called updater 2.3.3 and 'freeze' it. Fortunately that did not stop updates from the marketplace from google and amazon for applications.
I have not received any more software update requests but it has only been a couple hours and time will tell. Thoughts on any of this from anyone?
Sent from my DROIDX using XDA Premium App
Chainfire, can be a nice help. At least for my X it is.
Sent from my DROIDX using XDA Premium App
Chainfire... also SD Speed
Chainfire is a good idea, I have to check that out. I also updated my SD card cache from the measly 128K to 2048K, which seems to help further...
Hi,
recently i came upon a thread with someone asking :
how to optimize the archos to be quicker ?
As this is propably a question many people might ask (even I still do ) I thought about creating a thread about. This is not just to answer his question but also for all u nerds out there to corrent me - as I might be wrong in some points AND to gather new options to speed up the device. This is what i have learned yet...
Anyway all of the things I list here require root as far as I know. So get your device rooted or abandon the Thread
ALL THINGS IN THIS THREAD ARE WITHOUT WARRENTY - SO IF YOUR DEVICE STARTS MUTATING INTO A DOG HUNTING YOUR ASS FOR NEW FLESH - BE WARNED
Memory Management:
Introduction: HAVING FREE UNUSED MEMORY ON ANDROID HAS (nearly) NO ADVANTAGE (exception having 0 memory also fu**s up the device -> 1. )
All of those methods wont make your device faster in the meaning of really getting faster in speed... as android already has a quite good memory management.
BUT if u get more space in memory your device can keep more of the apps U LIKE in memory (being inactive according to app lifecycle). This will make them get called faster next time u use them and your device will "feel" faster and more responsive.
1. What should work on all roms are the "minfree" settings -> meaning when android really kills apps - depending on free memory (if u don't know what is mean by - search for the "App Lifecycle" of android)
You can try setting those to the values mentioned by sibere (scroll down) or try finding your own settings. There for u can use any app like "AutoKiller Memory Optimizer" just serach "memory optimizer" in the market.
KEEP IN MIND - you may play a bit with those settings - BUT still u should know what u are doing if u use it!
LOW: If u set the values to low the device will kill apps very late keeping much of them in memory this might make you device get slow. If there is too less Memor fo a "new" app or another process just need more memory while running it has to close down other processes before memory can be allocated.
HIGH: If u set em too high u kill most apps instantly - and your device will get problems and might get unstable as far as i understood.
2. Try gettign more "free" memory by disabeling services - as those got the highest priority they wont get killed that fast by the memory management. For checking u might get an app like "TaskManager" wich lists all running processes.
Just check out what takes your memory and disable those u dont need.U can disaable them by using "Titanium Backup" disable app / uninstall em / or just uncheck their autorun by using a programm like "Autorun Manager". Remember if u just disable the autorun they might (re)start later still.
3. Use a low sceen count in your launcher and keep the widget count low. This is related to 2.) as most widgets run a "background service" to update itself / pulling information (e.g. a waether widget getting latest conditions, a calendar widget keeping connection to your calendar app,...) - each widget took at least 8MB memory when i checked with TaskManager - "greater" widgets like "Fancy Widget (sense like clock and weather widget)" sometimes take up to 25MB
4. DONT USE A LIVE WALLPAPER (live wallpapers use MUCH memory most 20MB-40MB - either they get closed down all the time - or they just reside in memory taking the memory u wanted to use for keeping other apps active)
I also noticed that the App Drawer got "much/noticeable" slower in every Laucher I tested while a live wallpaper was active
5. DO NOT USE A TASK KILLER (remeber the introduction!!! - and think about it yourself - if at least 20 ppl ask why - i write this down here )
6. SWAP / COMPCACHE (can be activated through UD config) - this is a really hard question - those methods extend your memory but the memory u gain is MUCH slower then the internal memory. So again u have to decide and try out if it helps u or it doesn't (I used em long time but never realy felt a big advantage of. Compcache even made my device feel slower and i got more FC's most time - also I tried to figure out how the memory management uses this "memory". But i din't find a clear answer yet - as some ppl mentioned that "inactve apps" wont get swapped - need some clear source... Anway in general those 2 should increase Multitasking capability at cost of speed.
7. FUDGESWAP
- noting yet - its GINGERBREAD only - so we have to wait...
FINALY: u have to decide on your own what u really NEED to run "simultaniously" (I personaly rather have less widgets and run background services like growl, eventghost, tasker) but u can count it yourself by checking back with taskmanager and having in mind your archos (GEN8) just has 256MB of internal memory.
CPU Manaagement:
8. (UD) If u got Urukdroid u can try setting your CPU Governor to another value like:
"Interactive" is more reactive than "on demand" (-> SIBERE)
9. Try an OC (OverClocked) Kernel -> get it in the Urukdroid Dev Thread (I wont link any here as u should know what u do and wich u choose!)
BEWARE not all devices can use an OC Kernel (sadly mine can't) but try it out...
10. Try overclocking your device with the Milestone Overclock Utility. This overclock method is based on a module insert. Again this just works with root.
OVERCLOCKING:
Each CPU is different -> each device is different and can handle different maximum speeds - this is related to the former position of the CPU on its waver while production...
So u have to try out what your CPU can handle safely - so it might happen your device will refuse to boot after u flashed a kernel or set some permanen OC values. Keep a BACKUP or reflash old kernel...
In general u normaly can't brick your device by overclocking as the CPU overheats -> safety function of the CPU stops it -> the device resets itself before the CPU get "burned" (hope this also aplies to ARM processors )
Other:
11. The Launcher: I tested out much lauchers already: ADW, ADW EX, VTL, Laucher PRO, Zeam Laucher, GO Laucher - most of them seem to be eaqual in speed and more differ in features (event Laucher PRO is still the fastest on my Wildfire [but development stopped some time ago], GO seemed to be a bit slower imho) - take any of those but avoid taking some over exagerated 3D'ish laucher like Regina, SPB Shell, Claystone...
12. Apps like "AutoKiller Memory Optimizer" have additionaly features to "optimise" the speed,... u might test those out but I didnt notice a difference most time. Still keep in mind - u should know what u are doing
13. Ok - u may want to hit me for that:
It's more a cosmetic thing - but I recently used UOT Kitchen for theming my framework and used the fly-in animations - and they feel much faster then the default animations just try it out... keep a backup of your original framework for reverting.
All the following Tweaks are mentioned by sibere (credits go to him and propably some other people)
echo "1536,2048,4096,6144,8192,10240" > /sys/module/lowmemorykiller/parameters/minfree
(this is related to 1. ; 1MB = 256 => valueas above are 6MB, 8MB, 16MB, 24MB, 32MB, 40MB)
to enable cgroups cpuacct:
mkdir /acct
mount -t cgroups -o cpuacct none /acct
mkdir /acct/uid
to change ioscheduler:
cd /sys/block/mmcblk1/queue
echo "deadline" > scheduler
cd iosched
echo 1 > fifo_batch
These are lost on reboot so if you wanna keep them, add a script to /etc/init.d
Finaly I also have patched the sqlite library. If you want the file, let me know. It boost a lot SQL database writings. See this thread http://forum.xda-developers.com/showthread.php?t=903507
Click to expand...
Click to collapse
Will ask him to comment on "cgroups, ioscheduler, and sqlite" as im not sure if they work with all rom versions / neither how they work exactly.
THANKS Sibere
EDIT:
aditional threads with tweaks
- Supercharger
- http://forum.xda-developers.com/showthread.php?t=1227269
BEWARE I HAVEN'T HAD THE TIME TO CHECK THEM OUT YET AND DIDN'T TEST THEM
SOME OF THEM MIGHT NOT WORK AND PEOPLEARGUE ABOUT THEM (e.g. the "debug.sf.hw =1" is heavily discussed)
IF ANYONE KNOWS MORE ABOUT THOSE OR CAN HELP TESTING IM HAPPY TO LEARN MORE ABOUT
Hi.
For a full reference to cgroups, you may read the cgroups documentation from the kernel.
Basically, it provides process aggregations in the Linux kernel, mainly for resource tracking purposes.
deadline IO scheduler has been used a lot for SSDs and proven to be quite adapted to flash memory.
The minfree settings set here are pretty much optimised by me for the archos. It gives you a good balance between available cache and free ram . Android starts to complain when the free ram drops below 32Mb. with these settings, the OOM task killer will try to maintain a free ram level above 32Mb. You DON'T need a task killer. It will just use precious ram resources and will mess up with the android integrated task killer.
Those settings are reset on boot, so you may add them in a script added to /etc/init.d/ directory.
SQlite optimisation is of great help and I already posted a lot of information about it when I posted the tweaked file. Please refer to this post. (You'll have to look for it, it's somewhere in the dev thread )
Enjoy your optimised archos!
Thanks guys, learning new tips.
Nice! Good tips. Thanks.
Very usefull reading, thanks!
thanks for the tips ! cheers!
Hello, I am JustLoveJoy, I am an up and coming developer, although I work very hard on my phone right now, my gf has gotten an Archos 8 G2 4GB tablet and I have it rooted but it constantly gives me some issues. Finding this thread, I have to ask, can these or any tweaks be applied to her tablet? is there any source code on github or somewhere else? I mainly wish to get her to be able to do her Farmville on it. I'd like to get on to the development boards with a custom rom for it but I need someone with a little experience to point me in the right direction for that. Thanks So much for starting this thread!
hi i just want to try to root my arnova 7g2 bit i don't find a straight 3d on xda. you clan indicate the right street
Inviato dal mio GT-N7000 con Tapatalk 2
did you notice that crow (CM7) for Gen8 was released ?
still nothing for developing for the Archos 8 G2 4GB? If I can get adb shell I would be happy!
Thanks
thinks man
:good:
Thanks for the great post! I still have one of these!
This is all guide with bug fixing on minicm7 2.1.X
Screen Cut:
Only in CWM/CWR
NMEAListener:
I think NMEAListener is GPS
I found that gps.conf is europe settings
since that i have no problem with it
for non-europe residence Here Patch
Compass:
Wait till nAa fix
Video Recording Lag:
did you experience this
use this file Download
Auto Brightness:
use this tutorial
Code:
1. disable auto brightness first in display
2. go to cm settings --> display --> automatic backlight --> choose use custom and allow light decrease
3. tick edit other level
4. set number of levels to 13
5. look at this pic [URL="http://attachments.xda-developers.com/attachment.php?attachmentid=874309&stc=1&d=1327627892"]Here[/URL] And [URL="http://attachments.xda-developers.com/attachment.php?attachmentid=874311&stc=1&d=1327627892"]Here[/URL]
6. enable auto brightness in settings (not cm)
7. restart
8. enjoy
Android market app won't show up:
clear data on app settings
Just use recommended tweak:
Non-Recommended tweak make ur phone less stable
Recommended:
SuperCharger
Ram Manager / PRO
Juwe Ram's script
Etc...
Non-Recommended
Build.prop tweak
init.d tweak
IPV4/IPV6
Etc...
End of first post continued in 2nd post
Guide for Minicm7
Notice ADW launcher Lag use this settings:
Code:
1) Screen Preferences - Desktop scrolling speed - set to something low-ish like 150-200, default settings are just plain moronic here. Desktop overshoot should be fine at 30 or 40.
2) Drawer Settings - Horizontal Drawer definite on (this is far superior to the scrolling drawer if you have more than a few apps, and feels much smoother).
3) Drawer Settings - Zoom effect speed - 400 is a decent setting, default was way too high.
4) Drawer Settings - Columns/Rows - 4x4 is a nice setting for portrait, if you don't like a crammed screen.
5) System Preferences - Wallpaper Hack - check this. If you have issues, change wallpapers to something of a sane size.
6) System Preferences - Use Screen Cache - check this.
7) System Preferences - Scrollable Widget support - you should start with this unchecked. Only check it if you have issues with some
Make ur phone fast without tweaks?
here my perfomance settings
Go to CyanogenMod Settings --> perfomance settings
Code:
1.) Set compcache ram usage to 18%
2.) Enable use jit
3.) Disable Surface Dithering (optional)
4.) Enable 16bit transparency
5.) Enable Allow purging of assets
6.) VM heap size 48mb
7.)
SDcard cache size 1024kb Class 1,2
SDcard cache size 2048kb Class 3,4
SDcard cache size 3072kb Class 4,5,6,7,8
SDcard cache size 4096kb Class 9,10
Go to CyanogenMod Settings --> perfomance settings --> cpu settings
Code:
1.) Available gorvernor set to smartassV2
2.) Min Cpu frequency 245mhz
3.) Max Cpu frequency 691mhz+ (optional)
4.) Set on Boot
Make minicm7 more battery save?
here my battery save settings
Note: this settings overwrite "Make ur phone fast without tweaks"
Go to CyanogenMod Settings --> perfomance settings --> cpu settings
Code:
1.) Available gorvernor set to smartassV2
2.) Min Cpu frequency 19mhz
3.) Undervolt
4.) Set on Boot
final step: Delete Unused App
Extra Section
Coming Soon
End Of My Post
LtHuNTer_StepheN said:
Don't use any tweaks:
tweaks make your phone fast but less stable
and don't use xloud and mobile bravia
they are fake
Click to expand...
Click to collapse
+1 10char..
I agree with other settings, but would you mind explaining why VM heap size is 48? I've read that 32 is better in the FAQ thread of minicm7, and 2048 sd cache cause hiccups while playing music in lower class sd cards, if you can, try to edit some things for lower class cards and higher class cards, for lower class cards 128 sd cache is better and doesnt cause hiccups, just a suggestion . On the other hand, I will try your CPU settings, the smartass v2 settings with min 248mhz and 691mhz, 691mhz is indeed the most stable for nAa kernel. BTW I use tweaks without any stability issues, supercharger v8 and sometimes ram manager pro.
This is the thread that I have read:
forum.xda-developers.com/showthread.php?p=17648469
hixvolnutt said:
I agree with other settings, but would you mind explaining why VM heap size is 48? I've read that 32 is better in the FAQ thread of minicm7, and 2048 sd cache cause hiccups while playing music in lower class sd cards, if you can, try to edit some things for lower class cards and higher class cards, for lower class cards 128 sd cache is better and doesnt cause hiccups, just a suggestion . On the other hand, I will try your CPU settings, the smartass v2 settings with min 248mhz and 691mhz, 691mhz is indeed the most stable for nAa kernel. BTW I use tweaks without any stability issues, supercharger v8 and sometimes ram manager pro.
This is the thread that I have read:
forum.xda-developers.com/showthread.php?p=17648469
Click to expand...
Click to collapse
For Perfomance it's better set 48mb
this help app memory management
this heap size is usefull for HD games
Oh i forgot
i will edit it
for that tweak is already tested
what i say is
Code:
build.prop tweak
mobile bravia engine
and useless tweak
for that tweak it may increase stability
i will edit so people understand
Post Updated
Thanks
Is there any way to fix compass?the compass is somehow inverse
for auto brightness setting, how many level are you using? Ultra brightness enable or not?
Sorry, but screen cutting still exist even with bootanim enabled..especialy when in recovery..
Btw nice thread...^^v
Sent from my E15i using Tapatalk
Post Updated
LtHuNTer_StepheN said:
Post Updated
Click to expand...
Click to collapse
Oops, i'm still using nAa 08...maybe because of that...0_x
Sent from my E15i using Tapatalk
bayumahendra24 said:
Sorry, but screen cutting still exist even with bootanim enabled..especialy when in recovery..
Btw nice thread...^^v
Sent from my E15i using Tapatalk
Click to expand...
Click to collapse
i think screen cut happen with smartass v2
D E V I L said:
i think screen cut happen with smartass v2
Click to expand...
Click to collapse
Flash the new nAa-08b kerner. This fix the problem
Hi!! I have just one question. The tethering wifi always disconnects when screen turns off. I tried wi-fi settings, advanced, never sleep but does not work. Do you have other solutions? Thanks
still score highly!!!
plus avent updated kernel and rarely get screen cuts!!
so id say great rom plus kernel!!
flegga92 said:
Flash the new nAa-08b kerner. This fix the problem
Click to expand...
Click to collapse
Still using nAa 08 (havent change kernel because what i see on the changelog, the difference between nAa 08 and 08b only the screen cuts fix) with:
- Cpu freq 19-600mhz
- smartassv2 on
- undervolt on
- bootanimation enabled
No more screen cuts since my prev post.
Screen cuts SOMETIMES only appear when i'm in cwm req...thats good enough for me..
For the video lag fix,does it work with other rom which have the same problem?flash with xrec or cwm?
Hello to everyone and excuse me if my question is probably going to be dumb (for sure it's an OT so please forgive me about that) but I'm quite clueless about the issue I'm experiencing and I hope to find an advice here.
I own and X10 mini with MiniCM 2.1.6 and 2.6.29.6-nAa-08 kernel. Everyhing's fine, really a great piece of work that has put new life into my beloved X10 Mini but I'm experiencing the 'screen cut' issue that's discussed here too: it happens only with some apps (Labyrinth for example) but it happens and I'd like to get rid of this.
I don't know if it could be an issue related to the apps not being designed for Gingerbread but I don't think so because I expect something different should this be the case.
I've read that the kernel nAa-08b is intended to solve this issue but it seems (maybe I'm wrong) that it isn't suitable for my X10 mini (I've made some digging around and the latest kernel version for my mini seems the one that I've already installed while the 08b seems to be intended for the X8). I'm sure that the reply is already around here but I couldn't succeed in finding it though I've read a lot (really a lot!) of posts here and there, especially on the official thread:
http://forum.xda-developers.com/showthread.php?t=1068553
where unfortunately I couldn't post because I'm a new member with less than ten posts. Some advices? Thanks anyway!
very good guide
thanks you very mach!
post updated
sorry im busy lately
Hi everybody!
As i am pretty mad about the slow responsiveness of my i9000, i would like to have everybody to tell the world some tips to help each other in making this phone faster.
My tips:
Use KitKat, Slimrom if possible (SlimKat weekly)
Install mackay kernel, or his bigmem libs.
Use ES Task Manager to remove autorunning apps.
Even like this, i get slowness after a couple of days of use.
What are your tips ? Is it responsive ?
Cheerios!
Ok right now working faster with slimkat latest versión with semaphore Ruth live OC 104% and sd card read ahead at 1024.
Waaay smoother.
I hope it keeps like this a couple of days
Enviado desde mi GameBoy Color
nice to know that :laugh:
Interesting topic :good:
Here's my tips:
ROM: Gamerzrom 4.0, altough I think "Mackay ICS 2014" it's the faster but it lacks some features as quick sms;
Kernel: "Devil4.3_galaxysmtd_20131022" with the following settings: Scheduler: SIO; dynamic fsync: off; governor: ondemand; min freq: 400MHz and max freq: 1000MHz; no OC; deep idle: off; smooth ui: on; sampling rate: 30000; up threshold: 50%; sampling down factor: 4step; eraly demand: off; RAM: 395mb; no zRAM; no swap; no KSM; (most of this settings are the default from gamerzrom)
Other settings: 16bit transparency: on; dithering: color band fix only;
Apps that help: "seeder 2.0" (rng service performance profile: light) and "greenify" (hibernate all apps except launcher and seeder);
Frozed apps with titanium backup: DSPmanager; ES file explorer; videoeditor; terminal emulator; trebuchet;
Launcher: Apex;
Ill try those settings and report back!
Enviado desde mi GameBoy Color
well my phone is lagging as hell too.Maybe ICS is the only solution to our problems?!?
I ve tried many 4.2 ,4.3 and 4.4 roms but after a month of use they all end up lagging even without any extra apps installed.
Can i install ics on top of kitkat or do i need to install gb stock first with odin?
Installing ICS on top of KK will cause bootloop. I think you need to flash GB with Odin (XWJVZ i.e.) then root it with Semaphore or CF-Root kernel. Then finally you can flash any higher Android builds by CWM. I prefer Mackay ICS 1.7. IMO the ROM with best performance. Good luck.
Wysłane z mojego GT-I9000
I don't know what's wrong with either of you people, but my i9000 is on KK 4.4.2 OmniROM Nightlies running alongside Semaphore 3.4.3s with Bigmem enabled (396 MB off and 408 MB on). Everything else is in my signature tab. Also, I've got 42 user apps in my phone (120 odd in total) but still smooth as butter.
Also, in Antutu I score 5400 without OC and 5900 at 110% Live OC.
For Smooth Kitkat on Galaxy i9000. Includes some basics as well.
1. Install Slimkat Weekly
2. Install Minimal Gapps (if required)
3. Remove Unnecessary System Apps with Slimsizer
Browser.apk and Chromebookmarksyncadapter.apk --> replace with lightweight browser eg. Lightning, Puffin or Naked browser
Gmail.apk, Email.apk and Exchange.apk --> Replace with K9Mail (OR keep just Gmail and forward everything from your Exchange Email)
Gallery.apk --> replace with lightweight gallery e.g. Quickpic (Camera still works fine)
Hangouts.apk --> Use normal messaging app
LatinIME.apk and UserDictionaryProvider.apk --> Replace with Swiftkey or Swype
NovaLauncher.apk --> replace with lightweight launcher e.g. Smart Launcher 2 (AND remove all animations from Launcher Settings)
Livewallpaperspicker.apk, phasebeam.apk, phototable.apk, visualizationwallpapers.apk --> Don't need fancy live wallpapers, otherwise get new phone
OTHERS that are safe to delete and you probably don't need (e.g. BasicDreams.apk, CloudPrint2.apk, Dashclock.apk, DSPManager.apk, HTMLViewer.apk, Music.apk, SlimIRC.apk, SoundRecorder.apk)
4. Get rid of animations. Go to Settings --> Developer Options and set 'Window Animation Scale' and 'Transition Animation Scale' to OFF. And set 'Animator Duration Scale' to 0.25x (to prevent the dialer keypad glitch).
5. Install Semaphore Manager from Playstore, then ensure LiveOC is 105%, Ondemand governor, Minimum 105Mhz, Maximum 1050Mhz, NOOP scheduler, and Bigmem is ticked (before reboot you must go to camera and ensure video is on 480p else it will force close on 720p)
6. Install Xposed Installer --> Add Bootmanager (highlight anything that don't have widgets or u don't need notifications from), and Greenify (hibernate anything that don't have widgets and u don't need notifications rom. Also, do not hibernate keyboard)
7. Wifi Advanced Settings --> Untick Scanning Always Available. Also ensure Location is on Battery Saving. Switch OFF Wifi, Bluetooth, and Location when you dont need it.
8. Settings --> Sound --> Untick Vibration on Touch and Touch Sounds (Also do this in your Keyboard Settings)
9. Accounts --> Untick syncing of items you dont need (e.g. Only tick contacts and gmail)
10. Settings --> Advanced Options --> MediaScanner behavior on boot --> Do Not Scan Media
11. Only install/restore apps you use frequently. Other Backup-Uninstall with Titanium Backup and Restore when required.
12. Keep widgets to a minimum
13. Restart your phone daily
Currently put CyanAOSP on an i9000 and it's running great. Overclocking to 1200Mhz seems to cause crashes though.
Switch kernel perhaps?
Currently on CM11 M5 snapshot with Semaphore 3.4.3 kernel, and its buttery smooth so far. M6 snapshot is giving UI crashes
OC Min @ 240 MHz and Max @ 1200 MHz, no crashes. SmartassV2 Governor, Smooth UI on, NOOP Scheduler, bigmems off, Deep Idle off, Touch wake on 30 sec
i ve just formated my phone back to stock 2.3.6 jw7 and root it with cf-root.I just cant believe how much smoother and faster gb is!
You guys should try the OmniROM+Neo Kernel Combination. You'll love it
PFFFFFFFFFFFFFFFFTTT, sent from my i9000
I prefer ICS, too, although it has more bugs than JB or KK...
It is not perfect, but in general useable!
Do not use the phone's features for performance. I think it's entirely relevant to the developer. With the rest of the kernel can handle.
Sorry bad English.
Up! Has anyone still use this phone and with a ROM? So yeah, how is it? Is there any tutorial of it?
My "Perfect" Build v1.0 - Guide (Custom Kernel, tune, zips, apks, libs, sound, vids)
Below you will find a detailed plan on how to get the absolute most out of your Moto G 2015. I've spent countless hours testing and tuning -- coming up with the setup shown here. Its unbelievably fast and effective, with top tier battery life, and an amazing and unmatched sound system.
Requirements (all downloads listed here are found on XDA, along with their threads for support and security verification)
*Flashables* (All found on XDA)
-CM13 Based Rom (I prefer crDroid, but also CM13 Official Nightly, and Temeseks CM13)
-G-Apps Pico 6.0 (latest version. you can install higher levels of gapps if you so desire, but pico will work just fine)
-Inazuma R3 Kernel
-Optimus R6 Kernel
-PDB-ABS Tweaks v5.0 (init.d Scripts, build props, etc)
-Project Skynet Genesys TX6
-PMB SQlite3 Engine Database v5.1
-FeraDroid Engine v0.20 Beta 3 (*optional)
-Xtreme Music v7.03
-Divine Beats Dolby Atmos v5.0
-Bravia v4 and X-Reality Engine 13-16mp
*APKS* (All found either XDA or Play)
-Selinux Mode Changer (on XDA)
-Kernel Aduitor - Modded Version (on XDA - Formerly known as Singularity)
-Busy Box Pro 1.24.1-Stericson (on XDA)
-System App Remover (Google Play)
-Terminal Emulator (Google Play)
Click to expand...
Click to collapse
I would recommend that you start entirely fresh -- full wipe, then clean install the rom/kernel/and zips.
...Lets Begin!!
Initial Setup:
-Download all the required apk programs and flashable zips, as well as the latest versions of a CM13 stable ROM (I prefer CrDroid for all out speed and stability)
-Wipe (or factory reset), then clean install in this order:
a)xxxxx CM13 Stable Rom
b)Open gApps 6.0 Pico
c)Inazuma R3 Kernel
d)Optimus R6 (NOT R7!!)
e)Project Skynet Genesys TX6
f)FeraDroid Engine v0.20 Beta 3
g)PMB SQlite3 Engine Database v5.1
h)PDB-ABS Tweaks v5.0
i)Xtreme Music v7.03
j)Divine Beats Dolby Atmos v5.0
*THERE IS A MAX of 10 ZIPS in the QUEUE. After you flash the initial 10, you can flash this next one.*
k)Bravia Engine v4 and X-Reality Engine Port
It will take about 5 minutes to flash all the zips listed above, but trust me... its worth it!
-Once all zips are flashed, wipe cache/davlik, then reboot.
-Run through setup, unchecking every single option along the way.
-Once loaded to the home screen, be sure to make your SD Card portable or permanent. (I prefer portable)
Initial Tweaks/Settings
-Enable Developer Options
1)2d gpu rendering
2)animation scaled down to lowest setting
3)advanced reboot menu
4)root enable and adb
-"MORE" (below wifi and data)
6)Emergency Broadcasts ALL OFF
-Sound
1)Vibrate on Touch OFF
2)Intensity 0%
-Display
1)low brightness level
2)adaptive OFF
3)Ambient OFF
4)Live Display OFF
5)Double Tap ON
6)Sleep 30 seconds
7)Wake up on plug OFF
8)Daydream OFF
9)Battery Light OFF
-Security
1)Unknown Sources
-System Profiles OFF
-Privacy
1)Block private
2)Block unknown calls/messages
-Location
1)OFF
2)Scanning OFF
Click to expand...
Click to collapse
Install all APKs from the download list:
-Fully Install BusyBox Pro 1.24.1 from within the program.
-System App Remover (all of these are optional, but here is my personal list. 50mb, and increased battery/performance)
**audio fx, basic daydreams, black hole, bluetooth extensions, BT midi service, browser, bubbles, calculator, calendar and storage, call log backup, cLock, CM wallpapers, CM Actions, android backupconfirm, android shared storage backup, android wallpaper cropper, email, exchange services, fm radio, google backup transport, google calendar sync, holo spiral, html viewer, live lock screen service, live wallpaper picker, location services, market feedback agent, omni switch, phase beam, photo screen savers, photophase, print spooler, proxy handler, screencast, setup wizard, terminal, themes, themes provider, user dictionary, vpn dialogs.**
-Selinux Mode Changer: Set to Permissive
-Kernel Aduitor - Modded
Click to expand...
Click to collapse
After installing Kernel Aduitor, here are the settings that will provide you with the perfect balance of battery life and performance.
Again.... (Very Important Settings)
-CPU:
-1401/200mhz MaxMin
-Conservative Governor (50 Down, 85 up, 15 feq step, everything else untouched)
-Schedule Work Queues on Awake CPU's - ON
-CPU Boost 0ms
-Sync Threshold Disabled
-Input interval 0ms
-Disable ALL core's input touch boost
-HotPlug:
-Intelliplug ON
-Conservative Profile (May use Balanced as an alternative)
-Touch Boost OFF
-Hysteresis 8-10 (May use 14-16 when used with Balanced Profile)
-Threshold Value 1000
-CPU Off-Screen Max - 400 (if unused while screen off.), otherwise, use 533-800mhz if you plan on listening to music while the screen off. 400mhz will cause skipping and major lag for this purpose.
-Thermal:
-Core Control ON
-VDD OFF
-Temp Throttle OFF
-GPU:
-465/200mhz if gaming. Otherwise 310/100.
-MSM Adreno Governor
-Adreno Idler ON
--60, 10, 10 for battery favoring
--35, 20, 5 for balanced
--25, 25, 3 for performance
-Screen:
-Color Profile CUSTOM
-Red 235, Green 240, Blue 255
-Min RGB 35
-Sat Intensity 80
-Hue 0
-Screen Value 130
-Contrast - 120
-Automatic High Brightness OFF
-High brightness OFF
-Battery:
-Power Suspend Mode HYBRID (Userspace for extreme battery)
-Suspend State 0 (When using Userspace, try 1 or 2 depending on your need for battery life)
-IO Scheduler:
-Internal- 2048kb read ahead
-Option 1 and 2 (*sioplus or deadline*)
-scheduler tunables (option 1-sioplus, for super fast reads and single task use): asycn read 400, write 4000, fifo batch 32, sync read 200, write 2000, writes starved 2 (option 2-deadline, for benchmarking performance (read 200, write 2000, fifo 32, front merge 1, read 300, write 6000, starved 2
-Option 3 and 4 (tripndroid and bfq) -- for everyday, well rounded performance. Excellent playback of HD videos, extremely fast USB transfer, very effective multitasker.
-External: 512kb read ahead
--TripnDroid or BFQ
-Rotational Storage ON
-Random Entropy ON from rotational storage
-I/O Stats OFF
-RQ Affinity 1 (You may try 2 if you aren't multitasking, 1 is more balanced between performance and multitasking, while 0 is for when performance is less needed, but effeciency and error free work is required)
LMK:
-Adaptive LMK ON
-15, 20, 35, 60, 95, 140mb
Virtual Memory (VERY IMPORTANT for performance, hence I will give ranges instead of exact figures. Depending on what you use your phone for, these settings can be drastically different. The ones I use are for all out performance, low lag, and moderate multitasking)
-Dirty Ratio: 75-95
-Dirty Background: 40-60
-Dirty Expire 500-750cs
-Dirty Writeback 5000-7500cs
-OverCommit 80-100%
-Swappiness 5-25
-VFS Pressure - 20-40
-Laptop Mode ON
-Min Free 4096
-Extra Free 8192
-zRam 300-350 (Stock is 510mb. I feel that a small ramdisk is just as effecient, while freeing up a few hundred mb for more traditional purposes.)
-WakeLocks:
-wlan_rx, wlan_cntrl, and wlan OFF
-Entropy:
-64 (128 optional) Read
-128 (256 optional) Write
-Misc:
-SELinux Permissive
-TCP Algorithm CUBIC
-Vib Strength 0%
-Logging OFF
-Dynamic F-Sync ON
-OTHER:
-Check "APPLY DURING BOOT" to every section of Kernel Aduitor's App
Click to expand...
Click to collapse
Next:
-Install Terminal Emulator, and open it.
-type "su" at the command prompt, then enter
-type "ABS" (all capital!) then enter.
-You will now see a basic text menu.
-Select #1. This will check your system to make sure its ready to move forward with the tweaks.
-Back on the main menu, select option 2
-Run the following scripts: (Run individually, then return to previous menu)
--#2PDB-Booster,
--#3 PDB Junk Cleaner
--#5 PDB-BuildProp Tweaks, then run each of the following tweaks:
2- Image quality
3- GPU Rendering
5- Increase Scrolling Speed
7- Touch Smoothness
9- Internet Speed Extender
11- Fix App FC's
13- Faster boot
14- Signal Strength Extender
15- HPSA Internet Tweaks
16- Flag Tuner
17- Voice Quality Extender
19- Faster Streaming
20- Liquid Smooth UI
21- 60 Frames Per Second Enable
-Next, return to main menu, and choose #6 PDB-Profiler
-Select your primary need. I use multitasking.
-#7 Ad Blocker Enable
-#8 Internet Speed Tweaker
-#11 SqLite Optimizer
-#12 and #13 should already be activated, but if not, do so now.
-#14 SD Card Speed Tweaker
-Return to Main Menu once again and choose #4
--REBOOT DEVICE--
Click to expand...
Click to collapse
After reboot, enter the Terminal Emulator once again:
Type "su" then enter
Then type "menu" (all lower case) and enter,
After the menu appears, perform command #1 - Checks. It should return all Ok's. If not, please visit the Skynet Genesys Thread for help.
Next, run command #3, and set the mode to balanced for everyday use, battery for low performance/good battery backup, and gaming for extreme performance with less regard for battery life. After completing this step, run command #4.
On this menu, run the following commands:
#1 Xtreme Renices (Places urgent priority on principle processes)****optional*** some ROMs have difficulty with this. Heating issues possible.
#3 Scaling + (lower power use and performance during deepsleep)
#4 WiFi Sleep (allows quicker dormancy of the wifi during inactivity)
#6 KSM (Memory Mergining, Same Page Merging of data used by multiple processes)
**#7 Google Killer (*OPTIONAL* Kills Google appls for battery life extension)
#8 Touch Screen Tweak (Improves responsiveness and reactivity of the touch screen. *OPTIONAL* If the earlier ABS build prop tweak did the trick, then you can skip this one. However, if it didn't give you the results you were looking for, I'd recommend trying this one.)
#9 Netboost - Some additional internet boosting tweaks
#10 Assertive Display - An advanced display manager for Qualcomm Hardware. Its a night/day difference for those who haven't used it before. It takes ambient and live display to a whole new level. Giving you clarity and depth in practically ANY light conditions.
Click to expand...
Click to collapse
With that all said and done.
Its been a pleasure, researching all of the tweaks and tunes available. I'm sure that those who are more experienced than me have came up with better ideas, but for this hillbilly from kentucky... its the best I can do! I love this phone, and the performance it offers for budget pricing!
Sorry its so long, and probably difficult to understand. But I hope you appreciate the work I put into it. There's a few revisions I plan on making to increase battery life, with the help of xposed, greenify, amplify, wakelock tuning, etc. And I didn't really get around to talking about the sound lib and progs we installed. I can assure you, there's nothing placebo about viper4android 2.4.01, dolby atmos, xtreme music, and about a dozen or so libraries that are log proveable as working. The bravia v4 Xreality engine.... I just started using it, and haven't had time to really test it out... but it *should* give us an increase in graphic quality, especially in regards to pictures and videos. In the coming days I'll be adding a new section to further increase audio, productivity, graphics, and battery life. But for now..... this is what ya get! REMEMBER THOUGH..... SELinux MUST BE SET TO PERMISSIVE for Xtreme Music Libs to work correctly. You'll be grateful that you did!
Thank you for reading, and I hope you get as much out of it all as I did.
Have a great weekend guys! and gals!
Feel free to cherry pick, add, remove, tweak, etc. No negative talk. If you don't like my work, do your own build. But if you have something constructive to say, questions to ask, or thoughts to add.... I'd be super grateful, and pleased to read them! My goal is to get the smoothest, fastest, and longest lasting battery as possible... . blended into one neat package.
I'll have to try this when I have time. Thanks for the extensive list of tweaks and addons!
@bubbyj
Thanks mate, looks good.
Would be good that you add the links for each item we have to download.
CPU frequency doesn't go down stays at 1,4 GHz heats up my phone..
Do we have to install Inazuma AND Optimus kernels or choose one?
HelpMeruth said:
CPU frequency doesn't go down stays at 1,4 GHz heats up my phone..
Click to expand...
Click to collapse
I put the wrong entropy levels in. It should be 64-128 read and 128-256 write. That cleared it up on my end. Otherwise check your CPU settings. Down threshold 50-60, up 80-85, step 12-16, conservative gov, conservative hotplug profile, intelliplug active, touch disabled in all locations. Sync disabled. Boost 0ms. If this fails, post screenshots of kernel auditor, each section. We will correct the problem for you.
-------
Yes, the inazuma provides a few options that optimus r6 and r7 don't. And vice versa. And because optimys uses any kernel, it simply overlays its settings on top of the existing one.
R7 has 1401 oc, but loses the intelliplug hotplug. It also loses adreno idler. And has a r6 few unique features added compared to inazuma r3. So by installing r3, then dirty flashing optimus r6, you get a hybrid kernel that offers the best of both. You get all freqs from 200 to 1401, with an added 300mhz state. You get intelliplug hotplugging. You get GPU oc and under clock of 100mhz for extreme battery savings and retain the adreno idler. You get all of optimus optimizations and updates, as well as all the governors and schedulers combined. Its really an awesome kernel that results in crossbreeding the two.
Edited the original post. Made extreme renices optional, fixed entropy causing CPU loading (now 64/128 or 128/256, whichever works best for your usage). Also removed battery optimize from ABS tweaks. It works well, but may cause lags.
It works fine without skynet and abs but the moment i flash any of those two the cpu jumps ans stays at 1,4 ghz
Where do you get R6? I can't find a link only for r7
Envoyé de mon MotoG3 en utilisant Tapatalk
vinz244 said:
Where do you get R6? I can't find a link only for r7
Envoyé de mon MotoG3 en utilisant Tapatalk
Click to expand...
Click to collapse
https://basketbuild.com/filedl/devs?dev=Flashhhh&dl=Flashhhh/Optimus/Optimus-R6-Osprey.zip
here
U can use ApkPure no need gapps anymore
Any update on the kernel setup?
Can someone just send me direct links to the correct version of each flashable files I need to download? I've tried doing this myself multiple times, but once it flashes the "audio enhancer" files it starts to say "unable to mount /data" and "unable to mount /storage" in the TWRP log, and when I reboot into the device, it takes a few minutes to "optimze apps" then it just sends me to the Cyanogenmod boot screen and it stays there. I really shouldn't be asking you guys for something like this but I've had to, multiple times, wipe my data and I'm just getting a bit frustrated since I really want to try this build. Thanks in advance.
OMG man, you give me another mobile with this tutorial, thank you very much mate!!!
Jushten said:
Can someone just send me direct links to the correct version of each flashable files I need to download? I've tried doing this myself multiple times, but once it flashes the "audio enhancer" files it starts to say "unable to mount /data" and "unable to mount /storage" in the TWRP log, and when I reboot into the device, it takes a few minutes to "optimze apps" then it just sends me to the Cyanogenmod boot screen and it stays there. I really shouldn't be asking you guys for something like this but I've had to, multiple times, wipe my data and I'm just getting a bit frustrated since I really want to try this build. Thanks in advance.
Click to expand...
Click to collapse
Same thing here , i still not found any way to get all the files flashed :/
Jushten said:
Can someone just send me direct links to the correct version of each flashable files I need to download? I've tried doing this myself multiple times, but once it flashes the "audio enhancer" files it starts to say "unable to mount /data" and "unable to mount /storage" in the TWRP log, and when I reboot into the device, it takes a few minutes to "optimze apps" then it just sends me to the Cyanogenmod boot screen and it stays there. I really shouldn't be asking you guys for something like this but I've had to, multiple times, wipe my data and I'm just getting a bit frustrated since I really want to try this build. Thanks in advance.
Click to expand...
Click to collapse
Check bellow
---------- Post added at 10:08 PM ---------- Previous post was at 10:08 PM ----------
FrancyelZelling said:
Same thing here , i still not found any way to get all the files flashed :/
Click to expand...
Click to collapse
Here is the list, all of then worker in my phone, but the names that he gaves is a bit different so be careful
NOTE:
I flashed the crDroid (04-22-2016) and it make a bootloop, I tried the AICP too, same problem, the only one which worked was the Nexus Experience 10.2. If you wanna try, the link is below.
Main Post:
*Nexus Experience: http://forum.xda-developers.com/2015-moto-g/development/rom-nxrom-nexus-experience-mm-6-0-1-t3347772
*G-Apps Pico 6.0 :http://opengapps.org/
*Inazuma R3 Kernel: http://forum.xda-developers.com/2015-moto-g/orig-development/kernel-inazuma-t3320323
*Optimus R8 Kernel:http://forum.xda-developers.com/2015-moto-g/orig-development/kernel-optimus-kernel-r1-t3300877
*PDB-ABS Tweaks v5.0 : http://forum.xda-developers.com/android/software-hacking/tweak-arkaynine-boost-script-v3-0-t3120404
*Project Skynet Genesys TX6: http://forum.xda-developers.com/android/software-hacking/android-l-booster-1-soon-t3030796
*PMB SQlite3 Engine Database v5.1: http://forum.xda-developers.com/and...mod-projct-mod-boost-nitro-x-edition-t2809443
*FeraDroid Engine v0.20 Beta 3:http://forum.xda-developers.com/and...beta-feradroid-engine-v0-19-ultimate-t3284421
*Xtreme Music v7.03: http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
*Divine Beats Dolby Atmos v5.0: http://forum.xda-developers.com/android/software/app-divinebeats-sound-master-phone-sony-t3274355
*Bravia v4 and X-Reality Engine 13-16mp: http://forum.xda-developers.com/and...recompeliren-bravia-engine-x-reality-t3141461
Download link:
*Nexus Experience: http://nxrom.us/motog3.html
*G-Apps Pico 6.0 ARM/6.0/PICO)
*Inazuma R3 Kernel: https://www.androidfilehost.com/?fid=24459283995305053
*Optimus R6 Kernel: https://basketbuild.com/filedl/devs?dev=Flashhhh&dl=Flashhhh/Optimus/Optimus-R6-Osprey.zip
*PDB-ABS Tweaks v5.0 :https://www.androidfilehost.com/?fid=24385658843824596
*Project Skynet Genesys TX6: https://www.androidfilehost.com/?fid=24499762635998635
*PMB SQlite3 Engine Database v5.1(will start automatically ):http://forum.xda-developers.com/attachment.php?attachmentid=3440756&d=1439715903
*FeraDroid Engine v0.20 Beta 3(will start automatically ):http://forum.xda-developers.com/attachment.php?attachmentid=3696184&d=1458938908
*Xtreme Music v7.03: https://www.androidfilehost.com/?fid=24499762636007047
*Divine Beats Dolby Atmos v5.0: https://userscloud.com/ppg965q9d4q7
*Bravia v4 and X-Reality Engine 13-16mp(The second Option): https://drive.google.com/folderview...leEc4MUVXWTdwQnFqV2kxRDcyblBpNXhELThEMGdvWmc#
The problem with skynet is the jump in entropy settings to like 2048 or so, that automatically occurs on some phones. This causes the cpu to lock in at 1.4ghz and pretty much stay there, and loading at 60-80%. I'm going to be offering a brand new build based around the AOSP roms that are popping up everywhere. I'm currently testing it thoroughly. Expect a new thread with a smoother, faster, snappier, and cooler running phone based around this new platform -- probably by the end of the week.
It will include an entropy fix with it. My current settings are 1536 and 256 (read-write) and it does great!
And just one more thing --- along with the new build I'll be offering, I'm also working on an intense battery build. I understand fully that not everyone is interested in squeezing out every last bit of performance and instead desire a usable phone that lasts much longer between charges. I've been working on it off and on for about 3-4 weeks now and have found some amazing tweaks and mods that'll accomplish that goal. The hardest part for me, is being an all out performance nut --- I lose interest in increasing battery life once the performance aspect starts to suffer. With that said, I'm going to be putting my wants to the side and focus much more on the community.
MAJOR UPDATE INFO:
It has came to my attention in the last week or so, that the latest builds of MM --- CM13 based --- DO NOT WORK WITH THE INAZUMA R3 and Optimus R6!! It will bootloop indefinetly. Only versions of CM based roms from prior to about 4/10/2016 will work with it. I've read about it on a few other threads, and tested it myself. It DOES NOT work. It appears to be a problem with the Inazuma R3 Kernel (you can view the thread to see a few people saying the kernel bootloops on the latest versions). The developer is apparently aware and is working on a fix.
As far as the 'unable to mount' /data issue, this occurs now and then with flashables. For me, the fix is to reboot twrp back into the recovery. Don't reboot system. Just reboot recovery, then continue to add your selections. The one that does it most often is the PMB SqLite3 database 5.1 --- and thats about 99% of the time. Hence, I install it at the very last.
I want to apologize for the problems that people have been having, many were my fault and I take responsibility for that. Luckily, everything is fixable and you can always return to your previous setup without issue.
AOSP Version 1.0 will be released by Friday evening.
CM13 version 2.0 will be released shortly after, with fixes to all the issues that have been brought up on here. Thank you again for point the problems out, and giving this a try. See you guys soon!
Check this tool >> http://forum.xda-developers.com/moto-g/orig-development/mod-maxopt-battery-saver-tuner-t2955539/ it does miracles to the battery life and multitasking, before flashing put your phone on airplane mode and do a nandroid backup