stuck at bootloop, odin failing to flash stock firmware - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

Hey all, after being on cm for a while I returned to stock using odin. After I rooted using motochopper and installed cwm. I then attempted to updated using OTA. It seemed to go well, but I got the message the the stock recovery could be flashed and I said no the fix and then said no to fix root. The phone is now stuck on bootloop and get the message below when trying to flash stock firmware(MDB or MDL) using ODIN. When I did try and boot the phone gave me a message about some file being in use. I have no idea where to go from here and any tips would be greatly appreciated.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!

You returned to stock, put a custom recovery on and then you decided to take the mf3 firmware update? Your recovery is now borked. Check out the best buy fix.

jd1639 said:
You returned to stock, put a custom recovery on and then you decided to take the mf3 firmware update? Your recovery is now borked. Check out the best buy fix.
Click to expand...
Click to collapse
Alright, thanks.

http://forum.xda-developers.com/showthread.php?p=45359306
Ah, the old ninja edit. Lol

Related

[Q] HELP...I stuck on yellow sprint screen after restoring from a nandroid backup

Yesterday I had just rooted my Sprint Galaxy S4 on 4.3 and tried flashing Sac's 4.3 Rom and it 1st left me at some shinig small android logo so i decided it would've been a better idea to restore back to stock ( with the back up i made in TWRP ) and after i restored the back up, the phone's screen was stuck on the yellow sprint boot screen. After that i've tried using Odin mutiple times as seen a solution in other posts to completely put the phone back to stock/unroot it and i get the following error from Odin: *Note I've tried using 2 different versions of odin and 2 different laptops.*
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Someone please help me out here
jaden7201 said:
Yesterday I had just rooted my Sprint Galaxy S4 on 4.3 and tried flashing Sac's 4.3 Rom and it 1st left me at some shinig small android logo so i decided it would've been a better idea to restore back to stock ( with the back up i made in TWRP ) and after i restored the back up, the phone's screen was stuck on the yellow sprint boot screen. After that i've tried using Odin mutiple times as seen a solution in other posts to completely put the phone back to stock/unroot it and i get the following error from Odin: *Note I've tried using 2 different versions of odin and 2 different laptops.*
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Someone please help me out here
Click to expand...
Click to collapse
Grab this tar (it's zipped, so unzip and use tar.md5..) and try it in Odin. It's the full MJA.
Also make sure to run Odin 'As administrator'
Thanks leadbuilder! I managed to reflash a stock 4.3 mja.tar from that exact link about an hour ago i right before i read your reply.
Thank you for repsponding though!
Thanks for the reply!
It's always good to know what happened. That way maybe others can benefit too.
If you hang around and read all the way through some of the posts you will quickly get a really good education on how this device works and have a blast with this phone. There are some really good devs and contributors here.
Good luck.

[Q] Could Not Do Normal Boot *Odin Mode* (ATT I337)

Hoping that someone can tell me what steps I've missed. Had previously attempted to root and then got several errors which then got me to the
*Odin Could Not Boot Normal*
Having done that I attempted to do a wipe. Here is what I did.
Downloaded firmware from Sammobile (MDL) is the baseband.
Went into download mode and attempted reload firmware.
Getting the following error from Odin when I try to load the firmware.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At a lost. How do I resolve/fix this *Could not do normal boot*? Please help someone.
Are you sure you're phone is on mdl firmware? I'm guessing that's the problem.
I guess you flashed mdl on mf3 or later version. Or if your phone was already on mdl, you used the wrong Odin.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

[Q] Unknown Problem

Hello I have an Att Samsung Galaxy s4 SGH-I337 running 4.3 Jellybean. I have had it rooted but something went wrong when trying to flash a custom rom. I got it stuck in download mode and it took me a while to get it out. I had to do several battery pulls when it finally booted I unrooted the phone and it works normal. Except when trying to install a new update it tries to reboot but goes into download mode. So i try to boot into recovery and can only get it into recovery mode. I have no idea what I have done and I have tried to use kies and odin to no success odin just gives me an error. thank you for your help
What error do you see with Odin? What file are you trying to flash?
I try to flash back to original firmware using sammobile.com/firmwares/1/ and when I try to use odin it says
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thank you for your help
mm99baller said:
I try to flash back to original firmware using sammobile.com/firmwares/1/ and when I try to use odin it says
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thank you for your help
Click to expand...
Click to collapse
It appears that you are flashing the MDL firmware. I took is as your phone has MDL firmware.
I used to have MDL phone and it went to boot-loop due to my error in flashing a custom rom.
I used that MDL firmware to flash but it failed. So I used MDB files to flash and it went through. My phone booted as MDB phone. That was my experience with that MDL file.
thank you for your reply I had the MDB file as well and just tried again. It gave me the same error as before.
mm99baller said:
thank you for your reply I had the MDB file as well and just tried again. It gave me the same error as before.
Click to expand...
Click to collapse
You started from 4.3 so you need to flash the same version. Use the MK2 ODIN files.
Sent from my SGH-I337 running GPE

Help (Bootloop SM-N910K)

Hello,
Can somebody help me with my SM-910K, i tried to root it using cf-auto-root but it didnt work. After that the phone reboot but it is only showing Note 4 logo and Olleg G. I tried to clear cache and wipe partition but still no luck. Can anyone please help? Thanks in advance
Go here http://galaxynote4root.com/note-4-stock-firmwares/ download the correct rom for your phone and reflash buddy. Reflash using Odin (I can provide this if its not included within the rom package)
fannyman said:
Hello,
Can somebody help me with my SM-910K, i tried to root it using cf-auto-root but it didnt work. After that the phone reboot but it is only showing Note 4 logo and Olleg G. I tried to clear cache and wipe partition but still no luck. Can anyone please help? Thanks in advance
Click to expand...
Click to collapse
just flash the latest rom at Sammobile via Odin and that will be fine..we have same model
luii03 said:
just flash the latest rom at Sammobile via Odin and that will be fine..we have same model
Click to expand...
Click to collapse
I tried flashing 4.4.4 but still no luck.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910KKTU1ANJ1_N910KKTC1ANJ1_N910KKTU0ANJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
ill try to download 5.1.1 later
speedyjay said:
Go here http://galaxynote4root.com/note-4-stock-firmwares/ download the correct rom for your phone and reflash buddy. Reflash using Odin (I can provide this if its not included within the rom package)
Click to expand...
Click to collapse
I tried flashing 4.4.4 but still no luck.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910KKTU1ANJ1_N910KKTC1ANJ1_N910KKTU0ANJ1_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)

Can't boot, can't enter recovery mode and can't flash stock ROM with Odin

Hi,
OK guys, I'm really stuck here so any help would be very much appreciated.
I have Galaxy S5 SM-G900F phone.
My current status is pretty much described in the title...
Trying to boot puts me in a boot loop with Warranty Bit: kernel or Warranty bit: recovery (depends if the last thing I flashed was root or recovery - both succeed with Odin)
Trying to enter recovery mode I get Warranty Bit: recovery.
When I try Odin to flash a stock ROM get this:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1BOI4_G900FOJK1BOI1_G900FXXU1BOI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At this stage I'm pretty desperate. I don't care which ROM or if I'm rooted or nor. Just need something working on my phone.
Help!!
Thanks.
basgruv said:
Hi,
OK guys, I'm really stuck here so any help would be very much appreciated.
I have Galaxy S5 SM-G900F phone.
My current status is pretty much described in the title...
Trying to boot puts me in a boot loop with Warranty Bit: kernel or Warranty bit: recovery (depends if the last thing I flashed was root or recovery - both succeed with Odin)
Trying to enter recovery mode I get Warranty Bit: recovery.
When I try Odin to flash a stock ROM get this:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1BOI4_G900FOJK1BOI1_G900FXXU1BOI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At this stage I'm pretty desperate. I don't care which ROM or if I'm rooted or nor. Just need something working on my phone.
Help!!
Thanks.
Click to expand...
Click to collapse
Thanks for using XDA Assist.Thread will be moved to Galaxy S 5 Q&A, Help & Troubleshooting.You'll get better support there
__
v7
XDA Assist
You can flash just the recovery using odin and see if it works out
basgruv said:
Hi,
OK guys, I'm really stuck here so any help would be very much appreciated.
I have Galaxy S5 SM-G900F phone.
My current status is pretty much described in the title...
Trying to boot puts me in a boot loop with Warranty Bit: kernel or Warranty bit: recovery (depends if the last thing I flashed was root or recovery - both succeed with Odin)
Trying to enter recovery mode I get Warranty Bit: recovery.
When I try Odin to flash a stock ROM get this:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1BOI4_G900FOJK1BOI1_G900FXXU1BOI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At this stage I'm pretty desperate. I don't care which ROM or if I'm rooted or nor. Just need something working on my phone.
Help!!
Thanks.
Click to expand...
Click to collapse
androidtweaker1 said:
You can flash just the recovery using odin and see if it works out
Click to expand...
Click to collapse
Tried it. didn't change a thing.
But it doesn't matter because i was wrong about the model (came in a 900F box but was actually a 9006V).
Once I tried flashing to correct ROM for my version everything was OK.
Thanks everyone...

Categories

Resources