Related
I've never done this and couldn't find anything up to date online :/ I'm rooted and adb is working - I just need to know where to put the contents of update-wipeall.zip: 'META-INF' 'system' and 'boot.img' - also, I'm pretty sure I use TWRP to flash ROMs, please include how to open it in your answer
Thanks - you guys are so helpful!
This was 2 posts below yours are you blind?
http://forum.xda-developers.com/showthread.php?t=1410766
Thanks!! No lol im not blind I just didn't know that would tell me how to install cm7 by the title.
Edit: Those instructions only tell me to copy the update.zip to sd card - what do I do with the 2 folders that came with the latest cm7?
Sent from my Kindle Fire using XDA Premium App
You have to flash Fire Fire Fire and TWRP. The easiest way to install is using Kindle Fire Utility from developtment section: http://forum.xda-developers.com/showthread.php?t=1399889
When you flashed it you see a yellow tiangle when you boot your Kindle Fire. Press the Power button until Power LED turns orange. Now the Kindle Fire boots into TWRP and you can flash CM7.
I used kindle fire utility to install twrp already - I think it installed FireFireFire too since I've seen the yellow triangle screen already.. if I'm wrong let me know. If I'm right - how do I get back to the FireFireFire screen to do it?
Sent from my Kindle Fire using XDA Premium App
Fire Fire Fire is a bootloader you can "see" it everytime you boot your Kindle Fire.
Ok I just rebooted my kf and I do have FireFireFire installed - i know update.zip goes in sdcard but what do I do with the two folders that came with cm7
Sent from my Kindle Fire using XDA Premium App
may i ask did you install fire fire and twrp since on a kindle you rooted with burrito root?
MDG420 said:
Ok I just rebooted my kf and I do have FireFireFire installed - i know update.zip goes in sdcard but what do I do with the two folders that came with cm7
Sent from my Kindle Fire using XDA Premium App
Click to expand...
Click to collapse
what folders?
you don't extract update-wipeall.zip at all, leave it as it is, just copy it in your sdcard.
When KF boots up keep power button pressed till TWRP shows up. Perform a backup if you want, so you can revert to Stock. Otherwise click Install and locate update-wipeall.zip on your sdcard, click it and then click Flash.
Don't worry about those errors, just click Reboot system when everything finishes.
Don't keep the power button pressed, let it boot by itself.
Enjoy CM7!
I used kindle fire utility .9 to permanent root (which installed burritoroot) then used it to install TWRP which I'm guessing installed FireFireFire as well since I see the triangle when I boot. Thanks for the info I didn't know I wasn't supposed to unzip it - I'm about to try now, thanks!
Sent from my Kindle Fire using XDA Premium App
Oh my my my, we have a newbie here. Yikes!!!!!! Read the TUTS. Also if you don't even know not to unzip the rom, you shouldn't being doing this kind of stuff. You might end up making a 200 dollar paper weight.
This is how we learn!
Sent from my SGH-T989 using xda premium
Does CM7 supports flash on browser?
Im not a complete noob lol this is just my first android device - ive got cm7 running and everything is going great so far - does anyone know the name of the tweak that lets you change the volume by sliding up or down on the side of the screen? I saw someone with it in a youtube video but they forgot what ot was called lol
MDG420 said:
Im not a complete noob lol this is just my first android device - ive got cm7 running and everything is going great so far - does anyone know the name of the tweak that lets you change the volume by sliding up or down on the side of the screen? I saw someone with it in a youtube video but they forgot what ot was called lol
Click to expand...
Click to collapse
That volume control app is available in the market. Look for "Volume Control" by RubberBigPepper.
$25.00 Reward through pay-pal to someone that can temviewer into my laptop and help me get this damn thing rooted properly.
Tried everything under the sun
just not working for me period
please if you decide to help know what you are doing
im having trouble getting adb to recognize the kindle in any way shape or form.
If i cant root it ill sell it. And get a Samsung,im not a noob but this is getting under my skin
reply to [email protected]
and i will respond quickly or respond with a pm
Have you tried kindle fire utility?
sent from the greezal's fire
Cant get the kindle recognized by kfu or adb
Sent from my SPH-D710 using Tapatalk 2
humdrum2009 said:
Cant get the kindle recognized by kfu or adb
Click to expand...
Click to collapse
Bad drivers.
http://forum.xda-developers.com/showthread.php?t=1552547
Go to device manager on your PC and find any drivers named kindle, or android, and uninstall them (you might have to show hidden drivers for them to show) and install the ones that came with kfu. Then reboot your PC and plug your fire in to the USB. And it should recognize your device
Sent from my LG-VM670 using Tapatalk
Thanks ill try that never had this much trouble rooting.
Sent from my SPH-D710 using Tapatalk 2
If you still need help I can get on team viewer tonight or tomorrow and help you
Sent from my LG-VM670 using Tapatalk
Thanks im gonna get some rest tonight and ill try tomorrow again.
Sent from my SPH-D710 using Tapatalk 2
I see you mentioned Samsung and root in the same sentence. Perhaps you already installed Samsung drivers? I had the same problem rooting my KF and this is what finally solved it for me: (quoted from android.stackexchange.com/questions/17625/where-is-debugging-mode-on-kindle-fire )
"You simply need to add the Fire's device ID to your android_usb.ini file so that the Google ADB drivers will find it. You can do this from the command line very easily with:
echo 0x1949 >> "%USERPROFILE%\.android\adb_usb.ini
Then restart adb
adb kill-server
adb start-server
"
Did you get it rooted?
Sent from my DROID2 GLOBAL using XDA
Not yet but i made a mistake and hit 1 on kfu stuck at fire screen.
. Waiting on it to charge back up to attempt booting tonormal mode.
It still wasnt seen by windows though.
Sent from my SPH-D710 using Tapatalk 2
Ok
Sent from my DROID2 GLOBAL using XDA
If kfu read it, windows recognizes it, I'm on team viewer now if you are ready
sent from my Nokia 5110
urns out I was trying to rooting and installing on my kindle fire android 7 inch HD achieves root but when you try to install the apk TweezerMod gave me run and put the Kindle screen in red and there does not pass that I can do I have only my tablet 15 days ago help!!
This mod appears to be for the kf2 not the kfhd,
It sounds like you flashed an improper image of some sort, and your lucky you still get some life out of your kindle...
I would wager at this point you need a fastboot cable and to reflash your kindle, after you make a fast boot cable look at the restore tool thread in the android dev section for the kfhd 7
Sent from my GT-P3110 using xda app-developers app
I wonder why we are so impetuous and threw ourselves(I included), without reading other's experiences, to do things that can potentially break our beloved devices?
One sees that adventure is adventure, but as well that with only a bit of patience reading the archive almost all the "casualties" could have been avoided....
My kfhd is on. because when I press the power button and turn on the device is displayed kfhd logo in orange and immediately placed the red screen and my pc does not detect when connected by USB cable manufactures. What I can do? Help me
That's the point, calm down and read this thread:
http://forum.xda-developers.com/showthread.php?t=1951254
Start with the basics before doing something worse. Read from the beginning to the last (83th) commentary. Is the correct form of doing things.
But first of all, the necessary cable is not that of the Kindle, is a especially modified one named "factory"that has 5 volt on the middle contact(5 pins) of the micro-usb, unused in your "manufacturer" cable.
You can find that special cable here: http://forum.xda-developers.com/showthread.php?p=20380015#post20380015
kindle fire hd 8.9 v8.3.1 help
i recently bought a kindle fire hd 8.9 v8.3.1, which i rooted and install go launcher ex successfully. after reading up on cm10.1 i went in pursuit of this mod. using KF first aide v4.1.87-beta i backed up my device then proceeded to installing the 2-bootloader and twrp 2.4.4.0 for KFHD 8.9. upon completion of the installation when my kindle rebooted there was no kindle fire logo in blue, only the normal logo boot up and then my screen turn red. i cant perform any function except to power on/off the device. when the device is off and pulled into my computer device manger displays my kindle till the screen turns red then it disappears. can any one help me with this problem as to reset or restore my kindle fire hd to default or factory settings this would be greatly appreciated .. thank you very much!
You did not reflash the boot loader, buy a fast boot cable, and restore the original os...this is now your only option...after doing that re read hash codes thread on cm10 especially taking note of the step 4.5
Sent from my GT-P3110 using xda app-developers app
mrkhigh said:
You did not reflash the boot loader, buy a fast boot cable, and restore the original os...this is now your only option...after doing that re read hash codes thread on cm10 especially taking note of the step 4.5
Sent from my GT-P3110 using xda app-developers app
Click to expand...
Click to collapse
Fast boot cables do NOT work on the Kindle Fire HD 8.9 nor are they needed.
Friend Might be a little more specific
mrkhigh said:
This mod appears to be for the kf2 not the kfhd,
It sounds like you flashed an improper image of some sort, and your lucky you still get some life out of your kindle...
I would wager at this point you need a fastboot cable and to reflash your kindle, after you make a fast boot cable look at the restore tool thread in the android dev section for the kfhd 7
Sent from my GT-P3110 using xda app-developers app
Click to expand...
Click to collapse
I spend something like and I want my tablet fastboot cable. if not too much trouble could you detail the steps to reflash my kindle
translated by google translator
HIO17 said:
I spend something like and I want my tablet fastboot cable. if not too much trouble could you detail the steps to reflash my kindle
translated by google translator
Click to expand...
Click to collapse
If you have a factory cable which you can buy from SkOrPn, then you can use KFHD First Aide to recover your kindle. Just follow the steps, it's easy as 1,2,3. http://forum.xda-developers.com/showthread.php?t=2096888
Hello,
i got my new Kindle Fire HD 7 with Firmware Version 7.4.7.
I can´t find any threeds about this FW-Version.
Is it possible to root this with "Root_with_Restore_by_Bin4ry_v31" ?
Thx for help.
Deepsmile
Deepsmile said:
Hello,
i got my new Kindle Fire HD 7 with Firmware Version 7.4.7.
I can´t find any threeds about this FW-Version.
Is it possible to root this with "Root_with_Restore_by_Bin4ry_v31" ?
Thx for help.
Deepsmile
Click to expand...
Click to collapse
Proceeding at all with 7.4.7 is at own risk. I have a used tablet coming in the mail and will be here Tuesday. I will restore and test out rooting with binary and try some KFFA things with 7.4.7. I won't know anything until late Tuesday evening. Maybe someone will come along with some information before then. If not, I will let you know then.
Edit - Because this is possibly new hardwareI have edit my response to say just don't try it until you here from those who made the scripts give the all clear. I thought this was just an update to the 2012 Kindle Fire HD and the new Kindle Fire HD. This may not be the case. Until it gets sorted out, probably best to wait for the devs to sound off.
Deepsmile said:
i got my new Kindle Fire HD 7 with Firmware Version 7.4.7.
Click to expand...
Click to collapse
Amazon just doesn't give up, do they?
Ph0enix_216 said:
Amazon just doesn't give up, do they?
Click to expand...
Click to collapse
nope
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
LinearEquation said:
nope
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
Click to expand...
Click to collapse
Maybe this is why we can't have nice things.
Kindle Fire HD 7" with FW 7.4.7
LinearEquation said:
Proceeding at all with 7.4.7 is at own risk. I have a used tablet coming in the mail and will be here Tuesday. I will restore and test out rooting with binary and try some KFFA things with 7.4.7. I won't know anything until late Tuesday evening. Maybe someone will come along with some information before then. If not, I will let you know then.
Edit - Because this is possibly new hardwareI have edit my response to say just don't try it until you here from those who made the scripts give the all clear. I thought this was just an update to the 2012 Kindle Fire HD and the new Kindle Fire HD. This may not be the case. Until it gets sorted out, probably best to wait for the devs to sound off.
Click to expand...
Click to collapse
I think my tablet is a normal Kindle Fire HD 7".
Why do you think it couldt be " probaply new hardware"?
Is anybody outthere with FW 7.4.7 ?
Deepsmile for you
Deepsmile said:
I think my tablet is a normal Kindle Fire HD 7".
Why do you think it couldt be " probaply new hardware"?
Is anybody outthere with FW 7.4.7 ?
Deepsmile for you
Click to expand...
Click to collapse
Yesterday I got a Kindle Fire HD 7" with Firmware Version 7.4.7. I tried to root this device, but I was not successful.
Is there anybody who was successful t root this device with version 7.4.7
If you have a factory cable you can downgrade and then root it? I'm running a custom ROM on my kfhd so can't help much for 7.4.7 sorry
Sent from my TF300T on CyanogenMod 10.2 using Tapatalk 4
I'm getting my Kindle Fire 7 HD tomorrow. So, it's not possible to root 7.4.7?
---------- Post added at 07:06 AM ---------- Previous post was at 06:58 AM ----------
hstinux said:
Yesterday I got a Kindle Fire HD 7" with Firmware Version 7.4.7. I tried to root this device, but I was not successful.
Is there anybody who was successful t root this device with version 7.4.7
Click to expand...
Click to collapse
How did you tried? Did it root? Did you have a factory cable?
Try this...
Get Bin4ry's root and extract the 'fakebackup.ab'. Get ADB set up and working and enter the following:
Code:
adb restore fakebackup.ab
If the restore screen pops up, where it says "restore my data" at the bottom (don't press on it though), then there's a good chance they didn't patch the exploit. If the ADB restore hasn't been disabled, I would say go ahead and try to root it. It probably wouldn't hurt to make sure the factory cable still works though.
Confirmed as working
soupmagnet said:
Try this...
Get Bin4ry's root and extract the 'fakebackup.ab'. Get ADB set up and working and enter the following:
Code:
adb restore fakebackup.ab
If the restore screen pops up, where it says "restore my data" at the bottom (don't press on it though), then there's a good chance they didn't patch the exploit. If the ADB restore hasn't been disabled, I would say go ahead and try to root it. It probably wouldn't hurt to make sure the factory cable still works though.
Click to expand...
Click to collapse
Deepsmile said:
Hello,
i got my new Kindle Fire HD 7 with Firmware Version 7.4.7.
I can´t find any threeds about this FW-Version.
Is it possible to root this with "Root_with_Restore_by_Bin4ry_v31" ?
Thx for help.
Deepsmile
Click to expand...
Click to collapse
I Have successfully rooted my kindle fire HD 7 - 7.4.7
With the Root_with_Restore_by_Bin4ry_v31
1) WHILE KINDLE IS UNPLUGGED Uninstall all kindle Drivers:
Download The adb drivers from the post
2) Go to settings on Kindle Enable ADB
3) Plug kindle in,
When the device is recognized you can now root.
4) Open the tool, Select option one, and read the instructions on the tool.
Enjoy!
isaiahmontero said:
I Have successfully rooted my kindle fire HD 7 - 7.4.7
With the Root_with_Restore_by_Bin4ry_v31
1) WHILE KINDLE IS UNPLUGGED Uninstall all kindle Drivers:
Download The adb drivers from the post
2) Go to settings on Kindle Enable ADB
3) Plug kindle in,
When the device is recognized you can now root.
4) Open the tool, Select option one, and read the instructions on the tool.
Enjoy!
Click to expand...
Click to collapse
Good stuff...
Sent from my Kindle Fire HD 7 running 4.3 Paranoid Android using xda app-developers app
Hi Guys,
Just to confirm I have also successfully rooted my new kindle fire 7.4.7 with the Root_with_Restore_by_Bin4ry_v31 Method.
gingebot said:
Hi Guys,
Just to confirm I have also successfully rooted my new kindle fire 7.4.7 with the Root_with_Restore_by_Bin4ry_v31 Method.
Click to expand...
Click to collapse
I'm getting error that C:/.../ric couldn't be found
have you any ideas?
root checker says device is rooted but still can't run apex or set a wallpaper etc.
yanogore said:
I'm getting error that C:/.../ric couldn't be found
have you any ideas?
root checker says device is rooted but still can't run apex or set a wallpaper etc.
Click to expand...
Click to collapse
You can try again. One will install some launchers with it too. Be careful though. Using this tool on the 4th generations is not widely tested. Not that I know of anyway.
Sent from my Amazon Kindle Fire HD running Paranoid Android using xda app-developers
LinearEquation said:
You can try again. One will install some launchers with it too. Be careful though. Using this tool on the 4th generations is not widely tested. Not that I know of anyway.
Sent from my Amazon Kindle Fire HD running Paranoid Android using xda app-developers
Click to expand...
Click to collapse
Hi, My kindle is not the newest one, so I assume it's normal Kindle fire HD 7'', I tried to run it another few times with different setups on my pc etc. same error every time. It's weird that it says it's rooted but I can't get most of the thing working, perhaps I should try to put in recovery, alt boot loader and install some different rom. But because I'm not confident about my root I rather use amazon-handicapped device than get a brick.
I would not proceed until your root is working properly. Sometimes the rooting process has to be repeated. You will want to get a fastboot cord just in case if you try to install ROM.
Just the other day I had to run root and restore 4 times before it took. Ended up I got the one that installs Apex launchers as well and just installed that afterward.
Sent from my Amazon Kindle Fire HD running Paranoid Android using xda app-developers
---------- Post added at 07:48 PM ---------- Previous post was at 07:47 PM ----------
I just uninstalled the added launchers afterward that is.
Sent from my Amazon Kindle Fire HD running Paranoid Android using xda app-developers
Hi, guys I got my kindle fire hd 7.4.7 rooted ok now i wanted to install twrp and a custom rom but kkfirsaide can't downgrade it, It runs all the way down ok and then after reboot I'm still on the 7.4.7, have you any solution for me?
yanogore said:
Hi, guys I got my kindle fire hd 7.4.7 rooted ok now i wanted to install twrp and a custom rom but kkfirsaide can't downgrade it, It runs all the way down ok and then after reboot I'm still on the 7.4.7, have you any solution for me?
Click to expand...
Click to collapse
You need a factory fastboot cord first. Use this tutorial to get TWRP/2nd bootloader installed http://forum.xda-developers.com/showthread.php?t=2128848
LinearEquation said:
You need a factory fastboot cord first. Use this tutorial to get TWRP/2nd bootloader installed http://forum.xda-developers.com/showthread.php?t=2128848
Click to expand...
Click to collapse
Hi, to install 2nd bootloader and twrp and then cm11 factory cable isn't needed. Kffa want downloading files to downgrade to7.2.3 so I got it manually inhaled then twrp and cm11 no problem. But then cm11 started crashing so I rebooted kindle butit dinner start, in twrp it reported that storage can't be mounted, I have pushed Rom using adb but it wouldn't install due to storage issue soI used that tool to recover kindle but after successful installation I got into a reboot loop. Factory reset cable is already ordered. After cm 11 issues I don't know if I'll try it again.
I was bored and decided to try to build a rom and see what happens, i don't know any c coding so its a bit of it it compiles and works great, if it doesnt work then i'll need a c compiler and both my friends that know c coding dont get online often.
Anyways about the details, i have sucessfully built a 7" and 8.9" Kindle Fire HD version of the rom, soupmaget is going to test the 8.9" rom, but i need a 7" tester prefereably with a fastboot cable incase things go south like the first time where it deleted the second bootloader from the system partition, though i think i fixed that. Anyways if you are interested in testing this pre-alpha build of the rom, plz reply back and il send you a link in a private message to the rom. On another note te tester should also be prepared to do a full backup of their sdcard of their device including the sdcard because i have not ever used this os so i have no idea how it handles the sdcard data, while it shouldnt wipe it i just think it would be a good idea in general.
I can test it.
I have a fastboot cable and the only files that I have are books anyway.
OK sweet I'll pm you the link with instructions.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
I'm your Huckleberry.
---------- Post added at 04:58 PM ---------- Previous post was at 04:54 PM ----------
stunts513 said:
i need a 7" tester
Click to expand...
Click to collapse
I messed up the quote last time. Anywho, link me if you want.
Sweet I'll pm u too.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Sweet I'll pm u too.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
First test:
Downloaded and flashed just fine. After wiping Dalvik/CACHE and rebooting into system it did show the Kindle Fire Animation followed by the TWRP animation and then displayed fastboot. Holding the power button down for 20 seconds powered it off and access to TWRP was still possible. Flashed a nandroid and all is fine. Let me know when the next update is available.
LinearEquation said:
First test:
Downloaded and flashed just fine. After wiping Dalvik/CACHE and rebooting into system it did show the Kindle Fire Animation followed by the TWRP animation and then displayed fastboot. Holding the power button down for 20 seconds powered it off and access to TWRP was still possible. Flashed a nandroid and all is fine. Let me know when the next update is available.
Click to expand...
Click to collapse
So ok im confused it just went into fastboot after trying to boot or something? If thats the case there must be something very wrong with the kernel i think.
stunts513 said:
So ok im confused it just went into fastboot after trying to boot or something? If thats the case there must be something very wrong with the kernel i think.
Click to expand...
Click to collapse
Correct. The flash was successful (in other words it did not fail.) I click reboot into system from TWRP. I saw the Kindle Fire animation followed by the TWRP animation and then, then stead of the ROM animation, it went strait to fastboot. Then I force powered it down, was able to access TWRP, wiped and then flashed my backup nandroid and the Kindle booted with no permanent issues. But yes, something is not right there.
Basically, rather than booting into the system, it booted into the bootloader.
LinearEquation said:
Correct. The flash was successful (in other words it did not fail.) I click reboot into system from TWRP. I saw the Kindle Fire animation followed by the TWRP animation and then, then stead of the ROM animation, it went strait to fastboot. Then I force powered it down, was able to access TWRP, wiped and then flashed my backup nandroid and the Kindle booted with no permanent issues. But yes, something is not right there.
Basically, rather than booting into the system, it booted into the bootloader.
Click to expand...
Click to collapse
*facepalm* i'm going to have to check the kernel image, this whole setup i used is kinda rigged because this os was designed to work with a specific version of jb aosp, and cm 10.2 is close to that revision but not exact so i used aosp as my source and had to modify some of hashcodes file sto get it to compile, but it finally did compile, seeing as there were problems here and there i'm going to take a wild guess the boot.img is using the standard header and not amazons, and thats just a wild guess at best, i don't know what a normal header would do on a kindle, but i will try to decompile the boot.img and see if it errors out like a usual kindle boot.img would if you dont shave off the header with dd.
Man i hate double posting but i thought i'd mention i think what i guessed at was right because it split immediately upon running the splitting script... so now i guess i need to ask hashcode wtf is going on and how to fix it since it's not compiling the boot.img with the correct header.
Sounds like a plan.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
Well I talked to hashcode, I'm trying to get it fixed, but I'm a bit confused, makefile coding isn't my specialty, I am going to ask other RC's and see what I can dig up.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
hi!!
stunts513 said:
I was bored and decided to try to build a rom and see what happens, i don't know any c coding so its a bit of it it compiles and works great, if it doesnt work then i'll need a c compiler and both my friends that know c coding dont get online often.
Anyways about the details, i have sucessfully built a 7" and 8.9" Kindle Fire HD version of the rom, soupmaget is going to test the 8.9" rom, but i need a 7" tester prefereably with a fastboot cable incase things go south like the first time where it deleted the second bootloader from the system partition, though i think i fixed that. Anyways if you are interested in testing this pre-alpha build of the rom, plz reply back and il send you a link in a private message to the rom. On another note te tester should also be prepared to do a full backup of their sdcard of their device including the sdcard because i have not ever used this os so i have no idea how it handles the sdcard data, while it shouldnt wipe it i just think it would be a good idea in general.
Click to expand...
Click to collapse
send me instructions for the test
I will next time I make a build after fixing this boot.IMG issue I have, I haven't seen hashcode in the IRC since Wednesday and I haven't been able to fix the makefile issue yet, I have to transfer some of the code from cm's /build/core/Makefile to mine, specifically the parts that let's board_custom_booting_mk work to generate the booting correctly. You would think there would be a patch for aosp that does this, but I guess most devices don't need a custom bootimg?
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Test
stunts513 said:
I will next time I make a build after fixing this boot.IMG issue I have, I haven't seen hashcode in the IRC since Wednesday and I haven't been able to fix the makefile issue yet, I have to transfer some of the code from cm's /build/core/Makefile to mine, specifically the parts that let's board_custom_booting_mk work to generate the booting correctly. You would think there would be a patch for aosp that does this, but I guess most devices don't need a custom bootimg?
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
I have understood that the boot.img should go hand in hand with the system you build,
so a custom boot.img should be mandatory
excuse my bad English, I use google translator
Any chance of a build compatible with the kf2?
I'm too broke to buy the newest fire hdx that's on sale for $180 today,so I'm holding on to my 2012 non-hd fire.
Sent from my Amazon Kindle Fire2 using XDA Premium HD app
agentfusion said:
Any chance of a build compatible with the kf2?
I'm too broke to buy the newest fire hdx that's on sale for $180 today,so I'm holding on to my 2012 non-hd fire.
Sent from my Amazon Kindle Fire2 using XDA Premium HD app
Click to expand...
Click to collapse
Keep an eye on Swappa. People are dumping their older models for cash for the newer models.
Sent from my Amazon Kindle Fire HD running CM 11 KitKat 4.4 using xda app-developers
I plan on building it for all supported kf's, right now I'm working out the build kinks and seeing if it will even boot. Just fixed the makefile issue but I may have introduced another issue by using a certain patch to disable recovery a while back, so I may need to grab a fresh copy of the make file and repatch it, I'll pm when it's more ready to test which will be soon.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Send me a PM once you get the boot.img thing fixed. I have a fastboot cable, too.
Sent from my Amazon Kindle Fire HD using xda app-developers app
Hi,
Just for understanding right. Is this for the Kindle Fire HD KFSOWI (3rd gen)?
If yes then I absolutely want to try your Rom.
Thanks in advance.