Database Users

[XOOM2/XYBOARD][HOW TO] Motorola Xoom 2/Xyboard Everything Root and more!

XOOM2/Xyboard Everything root and more!
From 26/03/2014, I will no longer be updating this post as I no longer have the device and Motorola won't be upgrading the device further. Please instead of sending me PMs, go to the Q&A board or post your comment on this thread.
Note: This method will not work on Windows 8. Only Windows XP, Vista, 7, Linux and Mac OS X is supported.
Root Method - Honeycomb
1. Download the Windows version here, or the Linux/OSX version here.
2. Your Computer must have Motorola Drivers installed before rooting and connect your device with debugging on to your computer via USB. (Mac Users don't need drivers)
3. Extract the zip file from the download link, and run “run.bat” (on Windows) or “run.sh” from a terminal (on Linux/OSX)
4. Your device should reboot a few times during the process, don't worry.
5. Then you should see a finished message on the Root Method Window. At this point your device is safe to be removed from the computer.
7. As you are running Honeycomb if you are reading this then you should be receiving the ICS OTA soon. So lets backup your root so you can restore everything root after the upgrade (saves time). Download OTA Rootkeeper and backup root.
6. Well Done! You have root. Enjoy root and be safe.
Blog Post: Here
Root Method - Ice Cream Sandwich
1. Connect your Xoom2/Xyboard via USB to your Windows PC. Install Motorola Drivers from here.
2. Under Settings > Developer Options > Hit the "Enable USB Debugging" selection.
3. Download the Root Installer from here. (Says for Droid RAZR but also works on Xyboard and Xoom 2]
4. Unzip the download.
Bootstrap/Safestrap[Custom Recovery]
Waring: DO NOT proceed if you are inexperienced. bootstrap is messy and is only needed once we have ROMs cooking. All questions about the recovery ask in the developer thread.
1. Install the Bootstrap APK file.
2. Allow Superuser Powers.
3. Read the instructions which is displayed on the user interface.
5. You will now see a splashscreen after you reboot (before boot animation), here you can decide if you want to enter recovery or continue with boot.
-Method Under Constuction-
Unroot or temporary unroot
Temp Unroot - If you need to unroot for any reason and come back at any time, then install OTA Rootkeeper and then select the option "temp unroot). This will remove root without restarting and you can restore by a touch of a button.
Full remove of Root - If you want to complety remove root all together, if you need to send in your device for repair or trading your device. Install Ginger Unroot and continue with the onscreen instructions. This application has confirmed to work on the Xoom2/Xyboard.​

Doing it right now

Linux version has a wrong link or not uploaded yet

mdcykkk9 said:
Linux version has a wrong link or not uploaded yet
Click to expand...
Click to collapse
Should be working now.

Thx is working now . i just made a donation to his paypal account. i hope for future support for the tablet .

Thanks, is good news. Now we just need that we have updates to fix bugs, and if it can be ics ...
This is worth a donation to continue the work.

édit : error, sorry, it's ok

Working well ! Thank you.
I rooted my Xoom 2 ME bought in France.
But I cannot update to 3.2.2 ???
My build 1.6.0_218.3-MZ607 ,current version 3.2

Would this work for Xoom 1 wi-fi version ?

ouatitw said:
Would this work for Xoom 1 wi-fi version ?
Click to expand...
Click to collapse
This root method should work on all Motorola Devices running honeycomb or gingerbread. Try it out and see if it does
Sent from my Motorola Xoom 2

I did the US ICS update on My UK Xoom so im on 4.03 at the moment - i believe Motorola added some file which prevents me so far from rooting with the current one click programs ? so would it be safe to try this ?

ouatitw said:
I did the US ICS update on My UK Xoom so im on 4.03 at the moment - i believe Motorola added some file which prevents me so far from rooting with the current one click programs ? so would it be safe to try this ?
Click to expand...
Click to collapse
The method is safe to try but Email Dan if you have any issues when rooting.

Thanks a lot Dan Rosenberg,
Suppose i root my device and if i need to use my warranty at later point of time.
Is there is anyway that i can hide Motorola that i have rooted my device.

luke.arran said:
The method is safe to try but Email Dan if you have any issues when rooting.
Click to expand...
Click to collapse
I wouldn't email Dan, I'd post it here... Dan probably has more than enough things going on than to answer all rooting questions on here...
This root method very well may work on the Xoom with ICS, never hurts to try it. I don't see how you can't root with an existing method though, with the Xoom being fully unlockable and all...

Elysian893 said:
I don't see how you can't root with an existing method though, with the Xoom being fully unlockable and all...
Click to expand...
Click to collapse
the thing is that maybe you can, but you might not want to Unlocking wipes all your data, apps, etc and also permanently sets a variable stating that your warranty is gone.
It might, for example, be desireable to create a backup of all your apps and data using titanium backup, which requires root, before unlocking your xoom.

Does this mean that more knowledgeable folks can create custom ROMs now, or does that still require an unlocked bootloader?

Trackz said:
Does this mean that more knowledgeable folks can create custom ROMs now, or does that still require an unlocked bootloader?
Click to expand...
Click to collapse
No, we need to figure out a bootstrap for custom roms. No custom kernels.
Also, the method to fix adb remount is reset every other boot by the kernel, init.rc rebuilds local.prop on reboot as a failsafe and can't be changed without a custom kernel...

Response to luke.arran
luke.arran said:
This root method should work on all Motorola Devices running honeycomb or gingerbread. Try it out and see if it does
Click to expand...
Click to collapse
Just to let you know this does not work on all Xoom models like you say. Here is my thread with my specs in it. I have tried it three times following the directions to a T and it never gets past;
"[*] Initiating Phase 1...
[*] This may take a few minutes, don't mind the buzzing."
I have now let it run for over an hour each time and it never goes any further and my Xoom is still not rooted. It did not even ever reboot on its own. Does anyone have any suggestions? If not I'll just use some threads 1 & 2, I got from a friend.
Thanks, InfiniteImmortal

llama-power said:
Unlocking wipes all your data, apps, etc
Click to expand...
Click to collapse
Not this method. It is supposed to unlock and root motorola devices in 10 minutes without deleting any files. When I read about this on android police I was very excited as I never rooted because I only needed Superuser for my Xoom (never was interested in ROMs) and could never justify scraping everything just for this.
I tested the files here on a windows 7 machine... if I run from command at step 2. I get su permission denied. If I run the batch file I get "failed backup" loop after the device has been detected
tried the portable one click .exe found in "Motofail: Universal Motorola Android Root Tool (Portable)" works perfect on my bionic
obviously fails to remount as it does not include local.prop from step 5. so it's not working on xoom
This is the most awesome root utility I ever came along. It took something like 6 mins to root my phone without losing any files, if I can get it to run on my Xoom this will be just a dream come true!

Update: This root method does not support the Original Xoom. Confirmed by Dan.

How to Root with Minimum Impact

Hi,
I'm expecting my Nexus 4 some time this week and I'd like a little help.
I have a htc one x at the moment. A while after I got it, I decided to unlock it and use custom rom etc.
With the nexus 4, I just want to root it without disrupting anything if possible. The one thing I don't want to mess up is getting the Ota updates as I couldn't get that to work again on my one x.
So to summarise, I want to root my Nexus 4 whilst retaining the ability to get Ota updates and full functionality as normal. Can anyone help?

You'll need adb/fastboot + the appropriate drivers.
-unlock BL via fastboot,
-flash recovery via fastboot,
-flash SU zip via recovery,
-leave BL unlocked, no reason to relock it.
That's it. Don't remove, or rename any system apps if you want the OTA to apply. You can even flash OTA's via a custom recovery, this will likely be available here prior to you getting a notification.
Good info here: http://forum.xda-developers.com/showthread.php?t=2010312

So there is no way to root the device without unlocking the bootloader and flashing the custom recovery?
I'm basically in the same boat. I'm developing android apps and want to use log reading apps but I don't want to have any custom rom/recovery on the phone.

mseebass said:
So there is no way to root the device without unlocking the bootloader and flashing the custom recovery?
I'm basically in the same boat. I'm developing android apps and want to use log reading apps but I don't want to have any custom rom/recovery on the phone.
Click to expand...
Click to collapse
You know when you are on other phones, you are actually unlocking the bootloader via a exploit or through the manufacturers developer center.
You need a custom recovery in order to obtain root. It is a must need, without it you cannot be rooted.
Only way to change your recovery is to unlock the bootloader. Having a locked bootloader locks it so your recovery can't be changed. So.... You get the idea
Sent from my Nexus 4 using xda premium

mseebass said:
So there is no way to root the device without unlocking the bootloader and flashing the custom recovery?
I'm basically in the same boat. I'm developing android apps and want to use log reading apps but I don't want to have any custom rom/recovery on the phone.
Click to expand...
Click to collapse
You can do it via adb with an insecure boot image, outlined here below the CWM method: http://forum.xda-developers.com/showthread.php?t=1993331&highlight=insecure
If you do it the CWM, or TWRP way you can flash the stock recovery again. You absolutely have to unlock the bootloader however, no way around that.
CF Root is another option: http://forum.xda-developers.com/showthread.php?t=2025274

i just want to make sure you know that if by some circumstance you lose ota that you can always just download the zip of the update here and flash in recovery. there really is no reason for ota that i can see on a nexus device. its here as soon as its released pretty much.

phermey said:
i just want to make sure you know that if by some circumstance you lose ota that you can always just download the zip of the update here and flash in recovery. there really is no reason for ota that i can see on a nexus device. its here as soon as its released pretty much.
Click to expand...
Click to collapse
Convenience? With CWM it even patches on first boot so you don't lose root or anything so I like being able to do OTA (well the one update so far) vs. having to connect to my desktop.

threeclaws said:
Convenience? With CWM it even patches on first boot so you don't lose root or anything so I like being able to do OTA (well the one update so far) vs. having to connect to my desktop.
Click to expand...
Click to collapse
no reason to connect to desktop if you have recovery. you can come here on your phone or 'chrome to phone' it over. find the thread. click the download link. then reboot in recovery and flash.

phermey said:
no reason to connect to desktop if you have recovery. you can come here on your phone or 'chrome to phone' it over. find the thread. click the download link. then reboot in recovery and flash.
Click to expand...
Click to collapse
I also could drop it into dropbox but that is all more work than just hitting "install" on my phone, it isn't like updates are released with enough frequency that the amount of work matters but like I said OTA is more convenient for me and CWM made it even more convenient. The OP may have completely different reasons for wanting OTA.

phermey said:
i just want to make sure you know that if by some circumstance you lose ota that you can always just download the zip of the update here and flash in recovery. there really is no reason for ota that i can see on a nexus device. its here as soon as its released pretty much.
Click to expand...
Click to collapse
i think you must have missed that part in bold. no reason to be a smart a$$ either when you are the one who didnt know there is no reason to connect to desktop.
remember... the whole reason for this thread in the first place is because the op lost ota on his last phone by rooting it. all i did was try to let him feel at ease.

ORStoner said:
Hi,
I'm expecting my Nexus 4 some time this week and I'd like a little help.
I have a htc one x at the moment. A while after I got it, I decided to unlock it and use custom rom etc.
With the nexus 4, I just want to root it without disrupting anything if possible. The one thing I don't want to mess up is getting the Ota updates as I couldn't get that to work again on my one x.
So to summarise, I want to root my Nexus 4 whilst retaining the ability to get Ota updates and full functionality as normal. Can anyone help?
Click to expand...
Click to collapse
Just use the nexus 4 toolkit, follow it's directions/steps - Can't get any easier or less impact than that. Install Drivers, unlock bootloader and root. Done. OTA still work, install busybox from the play store if needed.
http://forum.xda-developers.com/showthread.php?t=1995688

phermey said:
i think you must have missed that part in bold. no reason to be a smart a$$ either when you are the one who didnt know there is no reason to connect to desktop.
remember... the whole reason for this thread in the first place is because the op lost ota on his last phone by rooting it. all i did was try to let him feel at ease.
Click to expand...
Click to collapse
I wasn't being a smart ass nor was I unaware of other ways to get an OTA update, you said there was no reason for OTA on a nexus device and I responded why someone would want it.

clockcycle said:
Just use the nexus 4 toolkit, follow it's directions/steps - Can't get any easier or less impact than that. Install Drivers, unlock bootloader and root. Done. OTA still work, install busybox from the play store if needed.
http://forum.xda-developers.com/showthread.php?t=1995688
Click to expand...
Click to collapse
Don't use toolkits take the time and learn how to do it yourself so if you get into situations where you messed something up you know how to fix it as you know how adb and fast boot will work.
Toolkits are not worth the short cut
Sent from my Nexus 4 using xda premium

Can I just unlock the bootloader, fastboot boot not flash cwn and install root from there.
Also, how does unlocking bootloader affect warranty?
Sent from my HTC One X using xda premium

ORStoner said:
Can I just unlock the bootloader, fastboot boot not flash cwn and install root from there.
Also, how does unlocking bootloader affect warranty?
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
This is the best way to do it. Yes you can fastboot boot cwm so it'll be temp and just install supersu zip. Regarding warranty for bootloader, it originally came locked so should you need to return it, warranty will be voided if you unlock it. However, it would really be just fastboot oem lock if you need to relock it. The state won't show relocked if you do it. It'll be plain locked
Sent from my Nexus 7 using Tapatalk 2

VZW Software Update inside

Here is the Droid Razr HD software update. I have not tested it as I use CM 10.1 and have no interest in going back to stock. I found it on www.droidrzr.com in a forum post then shared it on my dropbox account.
I posted it on my Dropbox account so not sure how long it will last until the link is gone:
https://www.dropbox.com/s/d2x9vutel4vnqmm/Blur_Version.9.16.6.XT926.Verizon.en.US.zip
It does "fix" the bootloader unlock exploit though
http://www.droid-life.com/2013/07/1...the-kernel-exploit-for-unlocking-bootloaders/

scoobaspeaz said:
Here is the Droid Razr HD software update. I have not tested it as I use CM 10.1 and have no interest in going back to stock. I found it on www.droidrzr.com in a forum post then shared it on my dropbox account.
I posted it on my Dropbox account so not sure how long it will last until the link is gone:
https://www.dropbox.com/s/d2x9vutel4vnqmm/Blur_Version.9.16.6.XT926.Verizon.en.US.zip
Click to expand...
Click to collapse
So, stock recovery to install this?

I would assume you would need to be 100% stock, including the recovery, to install this.

scoobaspeaz said:
I would assume you would need to be 100% stock, including the recovery, to install this.
Click to expand...
Click to collapse
hmm put it on my internal storage and its not found, I think stock recovery wants to see it on a sdcard.

If your boot loader is unlocked before the update, it should stay unlocked. You just will not be able to unlock with methods out there now.
Sent from my Razr HD using xda app-developers app

I received the OTA today on my Max HD. It was build 9.18.79.
Sent using xda premium

A few questions I haven't been able to find answers to (many threads have been started on this new update topic and I haven't found the answers I'm looking for yet):
1) I've heard that there are two versions of this update, 9.20.xx and 9.18.xx... Anyone know the differences yet? Is one version for phones that have been unlocked and the other for phones that are still locked? Is one version for XT925 and the other for XT926? I received the 9.18 version, I am rooted, unlocked, and have a XT926 phone.
2) Anyone with an already unlocked bootloader try and take the update? Do you remember which version of the update you took? Did it install correctly? Are you still unlocked?
3) Anyone that is rooted and unlocked try to take the update? Did it install correctly? Are you still rooted and unlocked after the update? Did you have to protect the root with either SuperSU or Voodoo OTA Root Keeper? If so, do you mind posting step-by-step instructions for protecting the root so the phone is still rooted after the update?
Thanks to all who can shed light on these questions!

LifeAsADroid said:
A few questions I haven't been able to find answers to (many threads have been started on this new update topic and I haven't found the answers I'm looking for yet):
1) I've heard that there are two versions of this update, 9.20.xx and 9.18.xx... Anyone know the differences yet? Is one version for phones that have been unlocked and the other for phones that are still locked? Is one version for XT925 and the other for XT926? I received the 9.18 version, I am rooted, unlocked, and have a XT926 phone.
2) Anyone with an already unlocked bootloader try and take the update? Do you remember which version of the update you took? Did it install correctly? Are you still unlocked?
3) Anyone that is rooted and unlocked try to take the update? Did it install correctly? Are you still rooted and unlocked after the update? Did you have to protect the root with either SuperSU or Voodoo OTA Root Keeper? If so, do you mind posting step-by-step instructions for protecting the root so the phone is still rooted after the update?
Thanks to all who can shed light on these questions!
Click to expand...
Click to collapse
There are 2 different versions, depends on what System version you have of 4.1.2 on the XT926 only. The 9.18.79 version would indicate that your Systems version is 9.16.6 if this is not correct DO NOT FLASH. I am Rooted/Unlocked, if you take the plunge you must OTA Rootkeeper/SuperSU backup SU, as the update breaks Root> IF there is no backup of SU with the latest binaries. If you lose Root, there are a couple of ways to Downgrade. A common problem for those of us Root/Unlocked the Update FAILs at the end. Most of the Update goes through, however the new Radio does not go through, as of right now if you Update and your Baseband is VANQUISH_BP_100730.081.64.09P then you have the OLD radio, the new Radio is VANQUISH_BP_100730.160.64.15P.
Between the 2 OTA's these should match-up as either 9.16.6 = 9.18.79 or 9.16.9 = 9.20.1

Thanks for the reply! A few more questions if you don't mind (would hate to do something wrong... like I did last time... luckily I was able to revert back to an original version and fix the install... sigh...):
4) With protecting root, I need the SuperSU Pro version, yes? To be able to use the survival mode, yes? Will Voodoo OTA Rootkeeper do the same thing? Is it possible to use both "to be sure"?
5) I have everything backed up with Titanium Backup. Should I bother getting the pro version and backing everything up using the cloud backup and hypershell? Or won't this matter since if root doesn't keep I won't be able to use Titanium Backup?
6) I also have performed the VZW Wireless Hotspot hack using SQLite. Am I going to have to undo the hack in order for the OTA update to work?
Thanks again for all your help!

Update - I decided to attempt the update and hope for the best. System update 9.18.79.xx updating from 9.16.6.xx.
I purchased the SuperSU Pro from the Play Store, and used the survival mode in SuperSU. I also used the Voodoo OTA Rootkeeper and protected root. I figured if one didn't work the other might... Voodoo worked to protect and re-install root access (not sure about SuperSU as I tried Voodoo first to restore root after the install).
I am unsure if the bootloader is still unlocked, but from what people have said there doesn't seem to be a reason to believe it is re-locked. I haven't tested it out to know for sure though.
It appears that the entire update installed correctly. No errors, and the baseband version was updated to the new radio (xxx.15P).
I did not undo the VZW Wireless Hotspot hack prior to installing the update.
Hopefully this post helps others out there.
My final question... what does updating the radio/baseband do exactly?

i need help! i tried installing the update but i forgot i had TWRP.. so the update did not got installed, i rebooted the phone, but the OS tried to install the update again and inmediatly reboot the phone in recovery again .. then from recovery i flashed liquid smooth rom but i got stuck in the boot animation... my big issue is that my power button is broken! now i cant reset the phone to enter in fastboot mode.. i cant do anything... now my battery is totally drained and i cant turn on the phone (my power button does not work).. i can plug the usb cable and the led turns green. but i dont see any more options

rodmc123 said:
i need help! i tried installing the update but i forgot i had TWRP.. so the update did not got installed, i rebooted the phone, but the OS tried to install the update again and inmediatly reboot the phone in recovery again .. then from recovery i flashed liquid smooth rom but i got stuck in the boot animation... my big issue is that my power button is broken! now i cant reset the phone to enter in fastboot mode.. i cant do anything... now my battery is totally drained and i cant turn on the phone (my power button does not work).. i can plug the usb cable and the led turns green. but i dont see any more options
Click to expand...
Click to collapse
My suggestion, let your phone charge a bit.
Once charged up, turn it on and get it into Fastboot. From there you can use the DROID RAZR HD UTILITY 1.21 (http://forum.xda-developers.com/showthread.php?t=2307439). In that utility option 1 will bring you back to complete stock ROM, option 2 will bring you back to a stock recovery. This will completely erase your phone.
This should at least give you a fresh functioning phone. If you want to try to keep your data or personal files, I'm not sure what you could load via fastboot to get yourself a functioning phone again (maybe just a kernel?).
As a side note, I used TWRP to load the update and my phone updated except the radios it seems. It sounds like the same thing happens with the stock recovery.
Lenny

KachowPow said:
There are 2 different versions, depends on what System version you have of 4.1.2 on the XT926 only. The 9.18.79 version would indicate that your Systems version is 9.16.6 if this is not correct DO NOT FLASH. I am Rooted/Unlocked, if you take the plunge you must OTA Rootkeeper/SuperSU backup SU, as the update breaks Root> IF there is no backup of SU with the latest binaries. If you lose Root, there are a couple of ways to Downgrade. A common problem for those of us Root/Unlocked the Update FAILs at the end. Most of the Update goes through, however the new Radio does not go through, as of right now if you Update and your Baseband is VANQUISH_BP_100730.081.64.09P then you have the OLD radio, the new Radio is VANQUISH_BP_100730.160.64.15P.
Between the 2 OTA's these should match-up as either 9.16.6 = 9.18.79 or 9.16.9 = 9.20.1
Click to expand...
Click to collapse
So any idea how one might fix this?

LifeAsADroid said:
A few questions I haven't been able to find answers to (many threads have been started on this new update topic and I haven't found the answers I'm looking for yet):
1) I've heard that there are two versions of this update, 9.20.xx and 9.18.xx... Anyone know the differences yet? Is one version for phones that have been unlocked and the other for phones that are still locked? Is one version for XT925 and the other for XT926? I received the 9.18 version, I am rooted, unlocked, and have a XT926 phone.
2) Anyone with an already unlocked bootloader try and take the update? Do you remember which version of the update you took? Did it install correctly? Are you still unlocked?
3) Anyone that is rooted and unlocked try to take the update? Did it install correctly? Are you still rooted and unlocked after the update? Did you have to protect the root with either SuperSU or Voodoo OTA Root Keeper? If so, do you mind posting step-by-step instructions for protecting the root so the phone is still rooted after the update?
Thanks to all who can shed light on these questions!
Click to expand...
Click to collapse
I tried to take the 9.18.79 update I protected the root (I'm not unlocked) before I did so I also temporarily un-rooted (I've always been told to do this before and update) Now I an no longer rooted and it can't find any SU binary codes. Gonna have to flash back to 9.6.16 and try it again I guess or stay on 9.6.16 in order to maintain root for now. If you find a solution please share.

IDroidThere4Iam said:
My suggestion, let your phone charge a bit.
Once charged up, turn it on and get it into Fastboot. From there you can use the DROID RAZR HD UTILITY 1.21 (http://forum.xda-developers.com/showthread.php?t=2307439). In that utility option 1 will bring you back to complete stock ROM, option 2 will bring you back to a stock recovery. This will completely erase your phone.
This should at least give you a fresh functioning phone. If you want to try to keep your data or personal files, I'm not sure what you could load via fastboot to get yourself a functioning phone again (maybe just a kernel?).
As a side note, I used TWRP to load the update and my phone updated except the radios it seems. It sounds like the same thing happens with the stock recovery.
Lenny
Click to expand...
Click to collapse
I agree with Lenny. This same thing happened to me when I tried to take the liquid smooth ROM. Follow his instructions above. You'll lose all your pics, vids, files, etc. But at least you'll have a working phone again.

Went smoothly here
All my devices except this one are rooted and some are rom'd. I thought long and hard about whether to void this warranty but decided one day it would be out of updates from VZW and I would want to flash something. I have been denying the OTA for the last day so I figured now or never.
Here are the simple steps:
Download and install Moto device manager (for the USB drivers) here
Enable USB debugging in developer options on the phone
run motochopper here
run motoapocolypse here
install voodooOTA root keeper from Play and backup root
apply OTA
It went error free. The phone has the 15P radio update, unlocked BL and root.

larsdennert said:
It went error free. The phone has the 15P radio update, unlocked BL and root.
Click to expand...
Click to collapse
I want to confirm something, you unlocked the bootloader and then took the OTA and the bootloader remain unlocked (and stayed rooted due to root keeper)?
So the benefit to all this would be to get the new radio update?

bananapeapod said:
I want to confirm something, you unlocked the bootloader and then took the OTA and the bootloader remain unlocked (and stayed rooted due to root keeper)?
So the benefit to all this would be to get the new radio update?
Click to expand...
Click to collapse
Yes, the bootloader won't get locked again after it is unlocked. Moto would be shooting themselves having to reinstate warranties if they did that. Yes I wanted the option of flashing later becuase the ota will install sooner or later. I also want to stay on the upgrade path for now to have current radios.
I still have an Eris lying around that is long out of support but i have gb on it.

IDroidThere4Iam said:
My suggestion, let your phone charge a bit.
Once charged up, turn it on and get it into Fastboot. From there you can use the DROID RAZR HD UTILITY 1.21 (http://forum.xda-developers.com/showthread.php?t=2307439). In that utility option 1 will bring you back to complete stock ROM, option 2 will bring you back to a stock recovery. This will completely erase your phone.
This should at least give you a fresh functioning phone. If you want to try to keep your data or personal files, I'm not sure what you could load via fastboot to get yourself a functioning phone again (maybe just a kernel?).
As a side note, I used TWRP to load the update and my phone updated except the radios it seems. It sounds like the same thing happens with the stock recovery.
Lenny
Click to expand...
Click to collapse
that's what i want to do, but i cant because my power button is broken! so i cant enter to fastboot mode without the power button.. i will have to open my phone and try to fix the power button myself.

Just to make a point and to clear up any confusion, this Update will not lock the Bootloader. If you have an Unlocked Bootloader then you will have an Unlocked Bootloader after the update, regardless if it fully works or not, and even if you lose Root, the Bootloader will still be Unlocked. If Root is lost with an Unlocked Bootloader, I suggest downgrading through an FXZ of either 9.16.6 or 9.16.9 and restore Root.

98.18.78 update

I have a Motorola droid razr m model XT907. It's rooted and GSM unlocked. I'm using it on Straight Talk currently. Verizon is pushing this 98.18.78 update which I hear unroots the phone. I want to know which of the verizon apps I need to freeze or remove to prevent this update.
Thanks in advance

Blufx1 said:
I have a Motorola droid razr m model XT907. It's rooted and GSM unlocked. I'm using it on Straight Talk currently. Verizon is pushing this 98.18.78 update which I hear unroots the phone. I want to know which of the verizon apps I need to freeze or remove to prevent this update.
Thanks in advance
Click to expand...
Click to collapse
Just a heads up, you posted in the Razr HD forum, but no big deal the procedure will be the same for both. When I was running stock ROMs, I would freeze the updater.apk in TiBU to prevent OTAs. However, the new update is rootable with Motochopper 1.3, but you can't unlock the bootloader. If I was in your situation, I would unlock the bootloader now, take the update (for the improvements it offers), re-root it, and unlock it for GSM again. Once your BL is unlocked and you have a custom recovery installed, all you have to do is flash SU in recovery to regain root.

I thank you for the answer. You make it sound so easy,. However, I needed step by step instructions to get where I am now. Can you point me to some to do this? I've unlocked the GSM a couple of times using CellZealot's post. That's no problem. I have titanium backup to freeze the updater.apk, but what is TiBU? I'll get Motochopper in the meantime.

Duhhhh, I just figured out what TiBU is.

Blufx1 said:
Duhhhh, I just figured out what TiBU is.
Click to expand...
Click to collapse
If you don't want to unlock the bootloader and want to take the OTA, then root afterwards, you can find Motochopper 1.3 here:
http://www.droidrzr.com/index.php/t...oot-razr-m-xt907-for-locked-devices-on-91878/
If you want to unlock the bootloader, look for Motopocalypse here (you'll need root access for this, so unlock prior to updating. The OTA does block the ability to unlock the BL, but does not block the ability to root):
http://wiki.cyanogenmod.org/w/Template:Motopocalypse
Once you unlock the bootloader, look for the TWRP thread in the Development section, there should be instructions, along with the file you need to install the recovery. Once TWRP is installed, get the updater SuperSU .zip and flash it in recovery and you will re-gain root. If you want to update after unlocking, you can take one of the several stock ROMs running around here and flash in recovery.
SuperSU: http://forum.xda-developers.com/showthread.php?t=1538053
Long story short:
- You can stay as is, by just freezing the updater.apk
- You can OTA and re-root with Motochopper 1.3
- You can unlock bootloader and re-root afterwards.

Thanks again. I'll work on this tomorrow and post back.

Blufx1 said:
Thanks again. I'll work on this tomorrow and post back.
Click to expand...
Click to collapse
No probem, let us know how it turns out.

RikRong said:
If you don't want to unlock the bootloader and want to take the OTA, then root afterwards, you can find Motochopper 1.3 here:
http://www.droidrzr.com/index.php/t...oot-razr-m-xt907-for-locked-devices-on-91878/
If you want to unlock the bootloader, look for Motopocalypse here (you'll need root access for this, so unlock prior to updating. The OTA does block the ability to unlock the BL, but does not block the ability to root):
http://wiki.cyanogenmod.org/w/Template:Motopocalypse
Once you unlock the bootloader, look for the TWRP thread in the Development section, there should be instructions, along with the file you need to install the recovery. Once TWRP is installed, get the updater SuperSU .zip and flash it in recovery and you will re-gain root. If you want to update after unlocking, you can take one of the several stock ROMs running around here and flash in recovery.
SuperSU: http://forum.xda-developers.com/showthread.php?t=1538053
Long story short:
- You can stay as is, by just freezing the updater.apk
- You can OTA and re-root with Motochopper 1.3
- You can unlock bootloader and re-root afterwards.
Click to expand...
Click to collapse
To add to this, if you unlock, you will permanently be able to root...
Sent from my Nexus 7 using Tapatalk 4

Ok. I have the bootloader unlocked. I downloaded a rom from here. It's been cleaned up of bloatware and stuff. I have SuperSU and updater SuperSU, but I dont know what to do with it. I also installed TWRP manager. I need just a little more guidance.

Blufx1 said:
Ok. I have the bootloader unlocked. I downloaded a rom from here. It's been cleaned up of bloatware and stuff. I have SuperSU and updater SuperSU, but I dont know what to do with it. I also installed TWRP manager. I need just a little more guidance.
Click to expand...
Click to collapse
Ok, so first, you need to disable the install-recovery script. I built an app to do this (YOU GET TO BE THE FIRST TESTER YAY!)
Install this app: ftp://kd8rho.net/RecoveryFlasherDisabler-public-test.apk
Choose "disable install-recovery"
That will (theoretically - can't test cause my phone's rooted and ROMMed) allow you to install a custom recovery without any hassle.
Once that's done, follow the installation instructions in this thread http://forum.xda-developers.com/showthread.php?t=2226729, starting with this line:
Next, choose your recovery. There are 2 options, TWRP (Touch Win Recovery Project) and CWM (ClockworkMod)
Click to expand...
Click to collapse
You won't have to boot directly into recovery because that app *should* fix that for you. You can boot the phone normally after installing and run something like "adb reboot recovery"

I downloaded and installed your app. When I ran it, it said the installer was found, but disabled. moving on to step two now. Thanks

Hello. This is way off base but does the update fix the screen glitch? Are there any roms that will fix the glitch?
Thanks in advance!
Xt907 JESUS IS THE WAY, THE TRUTH, AND THE LIGHT! *BE BLESSED*

The screen glitch isn't fixed from the update. It might be better. I have a hunch the new radio isn't good for customers with unlimited data in areas with 4G coverage. My phone seems more eager to switch to 3g after the update. Besides that, I can't tell this update foes anything positive. It would be nice to use fastcharge while powered off but for some reason my device will not turn off while it's plugged in. It used to turn off and charge, then one day it quit working. If my battery is low enough and I turn the phone off the green light glows solid for s few minutes then the xt907 turns itself on. Can I downgrade to the previous radio or am I stuck with the new 3g friendly radio that presumably serves Verizon's purposes and not mine?
Sent from my XT907 using xda app-developers app

zombolt said:
The screen glitch isn't fixed from the update. It might be better. I have a hunch the new radio isn't good for customers with unlimited data in areas with 4G coverage. My phone seems more eager to switch to 3g after the update. Besides that, I can't tell this update foes anything positive. It would be nice to use fastcharge while powered off but for some reason my device will not turn off while it's plugged in. It used to turn off and charge, then one day it quit working. If my battery is low enough and I turn the phone off the green light glows solid for s few minutes then the xt907 turns itself on. Can I downgrade to the previous radio or am I stuck with the new 3g friendly radio that presumably serves Verizon's purposes and not mine?
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
Yea...all I did was flash the radio and it feels like I'm being throttled now that I have the new radio...still on the.3/.78 just with the new radio... I'll try and flash the old radio here in a min ... Are you on an unlocked bootloader?
Sent from my XT907 using xda app-developers app

zombolt said:
The screen glitch isn't fixed from the update. It might be better. I have a hunch the new radio isn't good for customers with unlimited data in areas with 4G coverage. My phone seems more eager to switch to 3g after the update. Besides that, I can't tell this update foes anything positive. It would be nice to use fastcharge while powered off but for some reason my device will not turn off while it's plugged in. It used to turn off and charge, then one day it quit working. If my battery is low enough and I turn the phone off the green light glows solid for s few minutes then the xt907 turns itself on. Can I downgrade to the previous radio or am I stuck with the new 3g friendly radio that presumably serves Verizon's purposes and not mine?
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
Unfortunately I am locked. Bought the phone *right* after the may update. I migrated from the droid incredible, which has an open bootloader I believe. So it's been pretty rough after having that phone!
Sent from my XT907 using xda app-developers app

What "screen glitch" are you talking about?

Oh, I forgot to post back. I managed to screw it up royally. But I have it straightened out now after a flash.

The screen will occasionally glitch on the left side, pushing the screen right and changing the color for about 1-2 seconds
Sent from my HTC6435LVW using XDA Premium 4 mobile app

Easy 2 click root: How I got to 4.2.2 Camera Update/Rooted and WP permanently Off

Are the root methods too complicated/risky for you? This is a simple solution.
Start with: original droid maxx software (12.7.7 i believe) on Verizon
1. Install motoroot 1.0 (JCase's first root method from original development section), run it, and click root (that's click #1). Make sure everything's working, reboot a few times, use rootchecker to make sure you've got root. (note you won't have write protection off and there'll be a 10-15 sec delay after booting up before you have root). But hey, it's 1 click.
2. Take 1st Verizon OTA to the 4.2.2 with camera update (12.15.15 i believe). Root should survive. Check that it did with root checker.
3. Install the write protection no more from the moto x original development section on your computer. download android-sdk and make sure adb is working, make sure fastboot is working. connect your phone to your computer and run the "write protectoin no more" app on your computer (that's click #2).
That's it. Now I have write protection permanently off, and I have root. I didn't have to use cydia impactor and mess with a tricky update to 4.4 which if it doesn't work I couldn't go back to a rooted phone. I never had to fxz anything or restore anything to stock, or lose any of my data. I didn't have to pay a dime or give someone on ebay all my phone info.
Sure I'd like to have 4.4, but pretty happy with where I am and how easily I got here. And I've read a lot of people say "the root methods are too complicated" --- well this is pretty easy cause you're just using 2 packaged apps.
I've gotten a lot from this forum, and just thought I'd share. Please don't flame. I feel like this is the best compromise of features:effort for me.

It was really easy to put an unlock code into adb.
Sent from my XT1080 using Tapatalk

Piaband said:
It was really easy to put an unlock code into adb.
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
if i could unlock it when i had gotten it in august, sure. but it's too much effort to start over at this point. i have everything set up perfectly. never had to start over. also didn't want to pay for it and send my info to some stranger on the internet. anyway, moot point. good for you, but that option's not available for most people.

So does this work when your already updated to 4.4?
Sent from my XT1080 using XDA Premium 4 mobile app

No nothing roots 4.4 at this point.

vegasdgk said:
So does this work when your already updated to 4.4?
Sent from my XT1080 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No he basically just rewrote the instructions of how to root the original firmware.

akellar said:
No he basically just rewrote the instructions of how to root the original firmware.
Click to expand...
Click to collapse
I didn't rewrite it. No where are there instructions for getting root AND write protection off on the 4.2.2 camera update without 1 using command line commands AND 2 that network based program (called Cydia compactor I think). There's none of those complications here. Most people don't even realize 1 click root survives the camera update.
But you are right as to kit kat. I thought my title was clear that this is for jellybean though.

mistermojorizin said:
Are the root methods too complicated/risky for you? This is a simple solution.
Start with: original droid maxx software (12.7.7 i believe) on Verizon
1. Install motoroot 1.0 (JCase's first root method from original development section), run it, and click root (that's click #1). Make sure everything's working, reboot a few times, use rootchecker to make sure you've got root. (note you won't have write protection off and there'll be a 10-15 sec delay after booting up before you have root). But hey, it's 1 click.
2. Take 1st Verizon OTA to the 4.2.2 with camera update (12.15.15 i believe). Root should survive. Check that it did with root checker.
3. Install the write protection no more from the moto x original development section on your computer. download android-sdk and make sure adb is working, make sure fastboot is working. connect your phone to your computer and run the "write protectoin no more" app on your computer (that's click #2).
That's it. Now I have write protection permanently off, and I have root. I didn't have to use cydia impactor and mess with a tricky update to 4.4 which if it doesn't work I couldn't go back to a rooted phone. I never had to fxz anything or restore anything to stock, or lose any of my data. I didn't have to pay a dime or give someone on ebay all my phone info.
Sure I'd like to have 4.4, but pretty happy with where I am and how easily I got here. And I've read a lot of people say "the root methods are too complicated" --- well this is pretty easy cause you're just using 2 packaged apps.
I've gotten a lot from this forum, and just thought I'd share. Please don't flame. I feel like this is the best compromise of features:effort for me.
Click to expand...
Click to collapse
Hello,
I have rooted my phone when i am in 12.7.7, then i took the OTA update 12.15.15, now my device is in a boot loop, it boots normally and after a few seconds it will reboot and it goes over and over again.
any thoughts on this and should I use RSDLite to flash it to either 12.7.7 / 12.15.15???

-Zeta- said:
Hello,
I have rooted my phone when i am in 12.7.7, then i took the OTA update 12.15.15, now my device is in a boot loop, it boots normally and after a few seconds it will reboot and it goes over and over again.
any thoughts on this and should I use RSDLite to flash it to either 12.7.7 / 12.15.15???
Click to expand...
Click to collapse
which method did you use to root it? what system stuff did you change after rooting it?
a lot of people had bootloops after taking an OTA because they did the root method that had replaced their stock recovery with a write protect off mode. so in effect, they were having bootloops because they didn't have the recovery, not because they had root. it their case, there was an easy solution of just flashing a recovery. unfortunately i don't know the details of how to do that off the top of my head.'
in any case, rsd'ing to either of those software versions will likely fix all problems.
i rooted as i described with motoroot 1.0, which didn't affect my recovery and was easy to OTA without problems.
good luck

mistermojorizin said:
which method did you use to root it? what system stuff did you change after rooting it?
a lot of people had bootloops after taking an OTA because they did the root method that had replaced their stock recovery with a write protect off mode. so in effect, they were having bootloops because they didn't have the recovery, not because they had root. it their case, there was an easy solution of just flashing a recovery. unfortunately i don't know the details of how to do that off the top of my head.'
in any case, rsd'ing to either of those software versions will likely fix all problems.
i rooted as i described with motoroot 1.0, which didn't affect my recovery and was easy to OTA without problems.
good luck
Click to expand...
Click to collapse
Thanks for the quick reply,
I used the PwnMyMoto here to root, i forgot that this method will replace / remove the stock recovery.
With a minute of panic and some google search, I'd managed to use RSD lite to flash the 12.15.15 FXZ and now my phone is back in business but kinda lost root.
Right now I am looking into the RockMyMoto method here and see if it can help me to gain root.

-Zeta- said:
Thanks for the quick reply,
I used the PwnMyMoto here to root, i forgot that this method will replace / remove the stock recovery.
With a minute of panic and some google search, I'd managed to use RSD lite to flash the 12.15.15 FXZ and now my phone is back in business but kinda lost root.
Right now I am looking into the RockMyMoto method here and see if it can help me to gain root.
Click to expand...
Click to collapse
glad you got your phone back in order, might want to check out slapmymoto (which is the path to rooted kit kat and involves running rockmymoto on the way) while you're at it

mistermojorizin said:
glad you got your phone back in order, might want to check out slapmymoto (which is the path to rooted kit kat and involves running rockmymoto on the way) while you're at it
Click to expand...
Click to collapse
Not sure about the battery life on kitkat of the MAXX right now, so i will stick with 4.2.2 first and do a little research.
Anyway, thanks for the reply and I've gained root on 4.2.2 (12.15.15) using RockMyMoto:laugh: