Hello,
First at all thank you for the help you provide here.
A week ago I got an AT&T GS4 (stock for now) and I use it at the office where we have two wifi routers connected using the same SSID to allow "roaming" across the office, they all are in separate channel but share the same SSID and Passkey.
Every time the GS4 it connects to a different router I get an authentication error message and the phone is disconnected from the network, then I have to re-enter the wifi password (though they are the same) and the phone connects to the network again. This did not happen with my prior phone (Inspire 4G with stock or Cyanogenmod) and does not happen with other's people phones (iPhones, HTC One), unfortunately mine is the only SG4 so I can not check if other SG4s have the same issue.
Checking the routers I see that this occurs when moving from one wifi router to the other, remember they both have the same SSID and password with different channels.
Any advise?
Thanks
Same here, "authentication error" with a similar configuration using two Buffalo Tech routers running dd-wrt. The S4 is the only device with issues, several iPhones, htc ONE, iPads, Blackberrie move from router to router seamlessly.
Anyone? thanks
Related
Hello,
First, its not that the router have problems, because I can connect an iphone and 2 other pc through wireless!
On wi-fi connection settings I can see the wireless connection. But when I try to connect to it, it stays "connecting" and then it fails and automatically become Unavailable!!
Any idea how to fix this problem?
router: Level One WBR-6001
I have exactly the same problem. Well try to work this out. I have two broadband lines in my home. One broadband line has a Zoom Router on it. The other Broadland line has a Dlink Router. My P3600 (WM6.1) can connect via Wifi to the Dlink router no problems with any Encryption. However, when I ever try connecting to the Zoom router I can see the wireless connection. But when I try to connect to it, it stays "connecting" and then it fails and automatically become Unavailable. I even can access unsecured networks up to 500 yards in my street. Anyhow I contact HTC support and they are one of the worst customer support group i have ever come across. They takes ages to respond to e-mails and offer stupid solutions that do not work. They Are as much good as a fireguard in a chocolate factory. So I contacted Zoom Support that do not what is causing the problem but at least they are in investgating the issue unlike HTC who seem not to be interested. My money is on the router.
Confirmed from HTC the problem was my router. I got new one a 3com router started working right away.
I had a 3com before this one and it worked well with my phone.
but i had to change it cuz it got broken
I know Google has said they are looking into it. But this is ridiculous. The N1 can not handle WPA2 connections. Even though it saves the connection and password, it almost never reconnects automatically. From what I was reading on the Google help forum, it appears to have compatibility issues with many retail routers and they suggest upgrading the firmware on our routers. Throughout my day, I may connect to 3 different APs. One is a standard Linksys wrt54g with sveasoft, the others I connect to are Cisco APs.
None of them automatically reconnect. Most of the time on the Linksys, I have to delete the connection on the phone and re-add it.
I still like this phone but between the 3g and wifi issue, it is a pain to use.
I won't pretend to understand all that you just said, but I can tell you that my router is set up using WPA2-PSK. Not sure if it is the same as just WPA2 but my N1 reconnects to mine whenever I get in range. Then at the office it will connect to the WPA2-PSK set up in there, and one more regular open connection that is available at our pool. Pretty much every time I look at it, it is connected to one of those 3. Or else if I am OOR of any of those, I am on 3G.
My home router is a Belkin -N. Work routers are a Netgear -N and a D-Link -N.
I've got a Netgear WNR2000 on WPA2, and I can confirm I occasionally have this issue with the phone not connecting to the network automatically. It usually does if I go into settings and touch it to reconnect again.
There is an easy solution for any WIFI problems, use a Mac Filter!!
I have to go into Settings > Wireless & Networks > WiFi Settings before my Nexus One will reconnect to my home router, which is also using WPA2-PSK.
Hopefully it'll be sorted in a firmware update, it is annoying having to go through 3 screens to do something that my Nokia Symbian phones have been doing without issue for almost5 years...
I am having no problems auto connecting to my home WPA2 network, I am using AES encryption and running DD-WRT firmware if it helps.
philaldred said:
There is an easy solution for any WIFI problems, use a Mac Filter!!
Click to expand...
Click to collapse
Mac Filters are no replacement for WPA2 or encryption. Almost every device has the ability to spoof a mac address. Using a mac filter might help quickly eject roaming devices nearby, but it is NOT security.
Its like using a No Trespassing sign to replace locking your doors and windows.
i found that APNDriod may be a possible culprit....
Before I installed APNDriod , every times I go back home, my N1 will connect to my home WiFi almost immediately.
But after I install APNDriod, my N1 will not connect to my home WiFI.....I need to go into the Wireless setting screen, once i am on that screen WiFi it will connect.
But it is strange this I don't have this issue in my office, it just connect automatically before and after installing APNDriod.
Today I tried NOT to use APNDriod for a day and my N1 connect to my home WiFi without issue..... will do more experiment tmr.
Netgear WNR3500 w/ WPA2-PSK. Reconnects every time I am in range.
I find that my Linksys is the worst. The Cisco Aironet 1121 is better, but still has occasional connection issues. And I have not installed APNDroid.
On another note, when my phone switches from 3g to 2g and vice versa, it takes a long time for the data connection to resume
My network at home is setup with WPA2. I have no problems connecting to it... I click on the little wireless icon, and wait for it to say "wireless settings updated" and also wait for the wireless icon to show up near the time... then i will start browsing
I have a Dynalink RTA1025W
My wifi is working now. See h**p://forum.xda-developers.com/showpost.php?p=5773148&postcount=26
No problem reconnecting to my home network with WPA2 . Apple's Airport Extreme.
No problems here connecting to my Belkin N1 router. Connects the moment its in range.
Setup using WPA2-PSK
im having this exact same problem on my D-link Dir 615!
Pisses me off alot, i hope Google fix it!
I found that unless I was on channel 6 or 11 I had issues
AES-CCMP, TKIP or WPA Cisco521G will not connect
My cisco 521AP does not connect using any type of encryption, it only works with open authentication. Expensive phone like this that doesnt work with business class products is a joke.
xoveruk said:
My cisco 521AP does not connect using any type of encryption, it only works with open authentication. Expensive phone like this that doesnt work with business class products is a joke.
Click to expand...
Click to collapse
@xoveruk - Someone must be able to help sort out this issue !
xoveruk said:
My cisco 521AP does not connect using any type of encryption, it only works with open authentication. Expensive phone like this that doesnt work with business class products is a joke.
Click to expand...
Click to collapse
My suggestion is - check what you're doing wrong before assuming the phone is at fault. And check that you're using PSK.
SEC AUTH ENCRYPTION
No security None Open - working
WEP WEP Open - no
WPA-PSK TKIP WPA-PSK - no
WPA2-PSK AES CCMP WPA-PSK - no
android 2.2 on N1, FRF91
I have my Tattoo rooted with 1.6 (can't recall the ROM name) with build number 1.67.405.6. Almost everything works fine except the connection with my home WiFi network. It's a PPPoE connection through ADSL modem. Next in line is the Netgear WG602 v3 WiFi router. At the beginning I couldn't connect at all so I changed the router's ROM to DD-WRT. Now I can connect with the router but no connection to the internet whatsoever. I can ping my router through my Tattoo, I can even open the 192.168.1.1 and mess around with its software but no connection to the internet. It is only limited to my Tattoo as I can connect through my laptop, through my other mobile (HTC S710) and also I can connect my Tattoo with any other WiFi (Secured or Open) with no problems at all.
I tried with no Security, with WEP, with WPA-PSK to no avail. Any other clues?
try running htc mail while you are using your wifi throuf your tattoo it worked for me
What is supposed to happen if I do that? I'm trying it as soon as I get home btw.
Nothing happened
Hi all...sorry for my interference but this problem is similar to mine.
I'm going mad from many weeks trying connect my Huawei Ideos (U8150) to my home wlan through a netgear VG602v3 AP. No way to do this.
Wifi works from my laptop and from my girlfriend's laptop, but from ideos it doesn't.
I turned off all wireless device in my house, I tried with/without WPA, I tried open network from channel #1 to channel #13, tried changing ssid and I also tried praying .
There is a weak wifi near here: it is on channel #1 and its power is between -89 and -82db. My wifi power (data from kismet) is between -50 and -18 db and is configured on channel #11.
In any cases, even if I put my Ideos near to AP antenna the story is ever the same:
- Ideos indentify the wifi network
- Ideos acquire the IP
- I open the browser or the android market and...
- Ideos lose connection...and so on.
I downloaded from work wifi (crypted with WPA) a wifi scanner from app store: it shows me the neighbour's weak wifi and my wifi network which appear and disappear recurrently.
Please, someone helps me (without suggest to buy another AP!!), any suggestions are welcome!!
Have you tried logging into the router and checking the privileges for devices. Some of them have a security element that restricts the use of the internet on newly connected devices until the setting is changed. I had a similar problem with a new laptop.
hope it helps.
I checked every setting to no avail. I still think somehow that my problem is with my router or adsl modem which doesn't connect automatically with PPPoE and Android doesn't have any command or software to initiate a PPPoE connection.
Other than that... Can't find any solution. Until then, I use connectify on my Win7 laptop. The thing is that I have to keep my laptop switched on as long as I'm in the house.
alpick36 said:
Have you tried logging into the router and checking the privileges for devices. Some of them have a security element that restricts the use of the internet on newly connected devices until the setting is changed. I had a similar problem with a new laptop.
hope it helps.
Click to expand...
Click to collapse
thank you for suggestion. I looked in depth but I did not found the option of which you were talking about. The unique solution still remains change the AP!!!
WiFi and Netgear Router
I think I finally found the answer. It appears Netgear routers support something called WiFi Multimedia. Its a QOS methodology. I disabled WiFi MM or WIMM as its sometimes called, as well as Internet QOS and all my problems connecting to web pages, the market, etc. through WiFi disappeared.
Strange that older versions of the ROM supported WIMM (or ignored it) and newer ones don't. But that solved the problem for me with no real degradation of performance on any of my other computers.
Good luck.
Got my 10.1 yesterday, it connected fine to my parents WiFi and Starbuck's... no go on my cisco wireless router at home. Anyone else have issues with connecting to a WiFi? I tried WPA2 and WPA, reset the device multiple times, even tried a static and it was a no go.
I can't connect to my Linksys router but I can connect to the qwest modem its attached to.
When connecting to my Linksys router it says obtaining IP address on both my tab and my galaxy s 4g but never obtains one. I did some research and a lot of people solved this problem by using a static IP for their device but my network is set up dhcp and I'd love to find a solution without having to setup a static IP.
I've also noticed when I'm using the wifi on my tab and sgs4g I experience a delay when loading pages and using data. I have a hspa+ tower right next to my house and when I use 4g or tether 4g to my tab I don't experience this lag. Has anyone else experienced this?
Sent from my Samsung Galaxy Tab 10.1.
Tried adding my MAC address and it got me one step closer (Obtaining IP), the router said it was giving it one, but it wouldn't take it.
I will post more details of the router that I use so we can compare the types and figure this out.
Sent from my Samsung Galaxy Tab 10.1.
I have a weird situation. I have an SMC8014W-G modem/router at my upstairs desktop and D-Link DAP-1360 Range Extender on the main floor. I can connect from wifi being initially turned off to either spot no problem. BUT I cannot move my phone or tablet from one of their locations to another unless I turn off my Tablet`s WiFi for about 5-10 minutes before turning at back on at the new location, or it will not connect. This is a problem with my network, because the same thing happens on my android phone. Still working on it. I`ve seen others across the web talk about this problem with other mobile devices, while saying the problem doesn`t happen on PC type devices like laptops.
To test that out, I turned my phone's hotspot on. Using my tablet I was able to switch between my home connection and my phone's wifi signal back and forth with no delay at all. But moving from my router's location to my repeater's location could not be done unless I waited 5-10 minutes whether it's on my phone or my tablet.
The entire network is on "802.11 G" (can't used mixed mode or N, that's a whole other story we're not going to get into here) and both router and repeater are set to exactly the same gateway, DNS, network name etc. Encryption is WPA2. The only difference between them is that my main router is set to be a DHCP server, while the repeater is not (it says I can leave DHCP Server off if the router's is on. Perhaps that's wrong, I still have to try that). And my router settings only shows WPA2-PSK while my repeater has more detailed options showing WPA2 Cipher Type: AES PSK/EAP: Personal.
omnius1 said:
I have a weird situation. I have an SMC8014W-G modem/router at my upstairs desktop and D-Link DAP-1360 Range Extender on the main floor. I can connect from wifi being initially turned off to either spot no problem. BUT I cannot move my phone or tablet from one of their locations to another unless I turn off my Tablet`s WiFi for about 5-10 minutes before turning at back on at the new location, or it will not connect. This is a problem with my network, because the same thing happens on my android phone. Still working on it. I`ve seen others across the web talk about this problem with other mobile devices, while saying the problem doesn`t happen on PC type devices like laptops.
To test that out, I turned my phone's hotspot on. Using my tablet I was able to switch between my home connection and my phone's wifi signal back and forth with no delay at all. But moving from my router's location to my repeater's location could not be done unless I waited 5-10 minutes whether it's on my phone or my tablet.
The entire network is on "802.11 G" (can't used mixed mode or N, that's a whole other story we're not going to get into here) and both router and repeater are set to exactly the same gateway, DNS, network name etc. Encryption is WPA2. The only difference between them is that my main router is set to be a DHCP server, while the repeater is not (it says I can leave DHCP Server off if the router's is on. Perhaps that's wrong, I still have to try that). And my router settings only shows WPA2-PSK while my repeater has more detailed options showing WPA2 Cipher Type: AES PSK/EAP: Personal.
Click to expand...
Click to collapse
I have a similar problem with my TP-link WA5210G wifi extender.
My laptop connect fine,but my phones for some reason don't want to connect,they just stay on the obtaining IP and don't connect,i have mine in universal repeater.
And my phone and PS3 will just not connect.
I am guessing that you have this thing turned on in "Repeater Mode"?
Are you using it in Repeater or WDS mode?
Repeater but I solved the issue with newer router now it's handing off properly. There's a slight disconnect and reconnect for a few secs when moving between the 2 points but that's liveable
Sent from my Atrix using Tapatalk
omnius1 said:
Repeater but I solved the issue with newer router now it's handing off properly. There's a slight disconnect and reconnect for a few secs when moving between the 2 points but that's liveable
Sent from my Atrix using Tapatalk
Click to expand...
Click to collapse
That's how it should be unless you're using the commercial routers I use at work. Those are generally way above consumer price points, though. Even at my house, I have a four second handoff time between router and AP.