So I dropped my phone. - Nexus 4 Q&A, Help & Troubleshooting

Hi guys,
So basicly I dropped my phone last night and the screen cracked and the touchscreen stopped working all together.
Any tips on what I should do with it ?
Do people want this for parts or something ?
I have a old phone that I will use. Probably untill the nexus 5 comes out
R.I.P my friend...

You can either give it to me for free or get a screen replacement assembly on eBay for about $110 or sell it for parts.
If the screen isn't damaged, only the digitizer glass it's cheaper but can be quite hard to replace due to the silicon glue used.
Use a good screen protector next time.
sent from xda premium app

Related

New HD2 Display Case?

Hello guys,
today my hd2 fell on the floor and the display cracked. the lcd and touchscreen are still working fine, even in the area where its cracked.
Is there a chance just to replace only the plastic case on the lcd? Or do i have to completly renew it?
Thanks!
Nope, sorry.
There's no plastic display on the HTC, nor anything plastic. The LCD is soldered to the digitizer and normally both should be replaced. They cost around 100$, and the replacement is about 200$ in the HTC center. You do the math, it's the price for a sec hand HD2. Otherwise, you can buy and change the digitizer (costs around 50$). But this is a very delicate operation to do by our own -you have to cut the LCD from the cracked digitizer and do many other things. As someone have said for some other reason "it is an easy operation, but if you have no experience in soldering, do not try to learn it on your laptop motherboard". So, your choice is between repairing it in HTC for 200$ and "repairing" it some other service for 100$, with questionable quality and voiding your warranty.
As you may guess, I have walked that road already. My HD2 was 1 week old. After some sleepless nights (as I was wondering what to do AND because the "perfectly working cracked screen" had cut my fingers) I sold it 100-120€ under the second hand market price and found a new one. That's also my advice to you. I.e. the first one. The second one is to buy a silicon cover for your next HD2.
ingrdgrbl said:
Hello guys,
today my hd2 fell on the floor and the display cracked. the lcd and touchscreen are still working fine, even in the area where its cracked.
Is there a chance just to replace only the plastic case on the lcd? Or do i have to completly renew it?
Thanks!
Click to expand...
Click to collapse

Digitizer Screen Relpacements

This is just general information for all who may have cracked or shattered your screen , Sprint will charge you a $100 deductible to fix or replace the screen if there is more then 2 cracks in it. This is nuts, just buy the screen and do it your self for $60 dollars.
Factory Screen Replacements
This is a well known problem as the screen will most likely crack when dropped.
Hope this helps out !!
Mine has some scratches on it bc I dropped it on asphalt, how hard would it be to replace the screen?
Sent from my PG06100 using XDA App
Well I believe it is just a snap fit top as it does come with a pry tool for opening the case. I will confirm this later today as I am doing a screen replacement for a friend of mine.
I will report back later with the procedure.

[Q] Where to buy Touch Screen ???

Well so it was sad day (for my friend)
Battery ran out, and phone was turned off for while.
He charged it and ........WTF.
The screen dosent respond to any touch inputs.
It just quit working.
Please help me find one digitizer for cheap!
is it just the digitizer or i also require lcd or .....whtvr.
thnx.
I bought just the digitizer from amazon... And i might retirn itcand get the combo lcd+digitizer. Seems much easier to do.
Sent from my SGH-T959V using Tapatalk
it would be
It will be much easier to do them both at the same time how ever it is possible to just do the digitizer. I tried this with mine a while back and ended up cracking the LCD because i didn't want to wait to use the heat to separate the LCD from the digitizer. They are glued together. It is doable, just BE VERY CAREFUL.
I got mine from ebay and it fit and looked perfect. There are quite a few sites that offer replacements for good price.
http://www.repairsuniverse.com/
http://www.ebay.com/sch/i.html?_fro...=htc+hd2+lcd+screen&_sacat=See-All-Categories

[GUIDE][WIP][DIY] **UPDATE! VIDEO ADDED** Nexus 4 Digitizer and LCD Replacement Guide

So ive had my Nexus 4 for about 2 weeks now and i love this phone! i recently went to Dallas with my Mom and Sister over the weekend. Upon getting to the hotel, my Nexus decides to slip out of my hand onto the concrete. When i picked it up, it had a crack on the top right corner of its face. No big deal, right? Wrong! The top half of the screen is completely unresponsive. Good thing i brought my Galaxy Nexus to hold me off through the trip. Once i settled in at the hotel, I whipped out my laptop and bought a replacement screen. I ordered from this site... http://www.etradesupply.com/oem-lg-...-assembly-with-front-housing-and-battery.html
Also, Mods, please move to appropriate forum if necessary.
Video by me- http://www.youtube.com/watch?v=BFwbaay-K6s&feature=youtu.be
http://www.ifixit.com/Teardown/Nexus+4+Teardown/11781/1
Sent from my Nexus 4 using Tapatalk 2
Judging from ifixit, it's going to be pretty hard to replace the screen. Would you mind keeping us updated on your progress here? I'm curious to see how hard it's going to be.
The glass is fused to both the display and the display frame. So don't crack the glass unless you're good with a heat gun, or you're fond of replacing the glass, display, and frame together ($$$).
Click to expand...
Click to collapse
- iFixit.
Yeah, I think it might be a bit of a challenge. Please tell us how it goes though.
i think he ordered the whole glass/screen/digitizer fused together thing, which shouldnt be as hard to replace ( i hope). Anyways, please do keep us updated.
Yeah, i ordered the entire front housing, (battery, display, digitizer, and frame) for a total of $186.72... I already have my Nexus 4 disassembled. I'm just waiting for the screen which should get here Wednesday. And yes, I will update this post as i replace the screen.
Sent from my Nexus 7 using xda premium
speedygonzo said:
Yeah, i ordered the entire front housing, (battery, display, digitizer, and frame) for a total of $186.72... I already have my Nexus 4 disassembled. I'm just waiting for the screen which should get here Wednesday. And yes, I will update this post as i replace the screen.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
At least you get a new battery too, but that' s expensive :crying:
Bump...
Sent from my Nexus 4 using xda premium
I don't think its worth buying the set for $180 and then risking doing it yourself, I sent mine to lg and they're repairing it for $140 total.. Although the price may vary based on the damage..
vikramkhalsa said:
I don't think its worth buying the set for $180 and then risking doing it yourself, I sent mine to lg and they're repairing it for $140 total.. Although the price may vary based on the damage..
Click to expand...
Click to collapse
you can get just the lcd and digitizer for 160 too, might be worth it if you dont have to ship it to LG or if it's an easy diy. There's even a b-stock lcd and digitizer for 140, the lightbleed special?
When you sent the phone to LG was it overseas or in the US? Also whats the website? thanks
neotekz said:
you can get just the lcd and digitizer for 160 too, might be worth it if you dont have to ship it to LG or if it's an easy diy. There's even a b-stock lcd and digitizer for 140, the lightbleed special?
Click to expand...
Click to collapse
i recently cracked my front display, but it still works fine. i'm looking into replacement options and i don't believe the suggested link you posted is a good choice, because the front panel + digitizer + lcd are all fuzed together and i don't have a heat gun...
http://www.etradesupply.com/oem-lg-...nd-digitizer-assembly-with-front-housing.html
this option is probably best at 120... but then i just read this on ifixit:
"The battery is stuck to the frame with a lot of adhesive, so removing it without puncturing the battery can be difficult."
so... looks like the 160 pre shipping/taxes is the best choice
*****
just as an fyi - lg is saying their repair cost is from 40-150 dollars approx... i might just go this route since it doesn't void warranty and i won't screw anything up myself
speedygonzo said:
So ive had my Nexus 4 for about 2 weeks now and i love this phone! i recently went to Dallas with my Mom and Sister over the weekend. Upon getting to the hotel, my Nexus decides to slip out of my hand onto the concrete. When i picked it up, it had a crack on the top right corner of its face. No big deal, right? Wrong! The top half of the screen is completely unresponsive. Good thing i brought my Galaxy Nexus to hold me off through the trip. Once i settled in at the hotel, I whipped out my laptop and bought a replacement screen. I ordered from this site... http://www.etradesupply.com/oem-lg-...-assembly-with-front-housing-and-battery.html
Also, Mods, please move to appropriate forum if necessary.
Video by me- http://www.youtube.com/watch?v=BFwbaay-K6s&feature=youtu.be
Click to expand...
Click to collapse
Thanks buddy,
The same happened to me. But unfortunately i'm located in India.. Is it possible to purchase this Display assembly from India..
I'm really worried..
Hi,
I'm sorry to dig out the old thread, but i'm trying to fix my N4 of similar problem but i have a question:
Is there a way to separate the LCD from the digitizer? This way i can keep the LCD and get only the digitizer to save cost as my LCD is still working perfectly. In ebay, an OEM Digitizer+LCD assembly cost USD100+ (http://www.ebay.com/itm/LCD-Touch-D...e_Replacement_Parts_Tools&hash=item3cd597ce9d) but the standalone digitizer only cost about half of it (http://www.ebay.com/itm/NEW-TOUCH-S...er_Cell_Phone_Accessories&hash=item43bf9536ff).
All the instruction that i can find so far on the internet involve replacing the entire assembly.
Battery bending under removal
I'm also sorry to have to reply to an old thread, but I am in urgent need of an answer.
I recently cracked my phone's screen. I ordered a screen+frame repair kit, and got repairing. However, when removing the battery, When prying it from the phone, I realized that the battery was soft, and my tool I was using to pry it off was actually bending it. The battery seems to be curved overall, and slightly pushed on some edges. Also, a weird "sweet" smell came from the phone. Perhaps the smell is the adhesive that sticks the battery to the phone; I do not know.
Will it be safe to use the same battery again? Or should I go ahead and purchase a new one?
Wouldn't a hair dryer work as an alternative heat gun
gravityz3r0 said:
Hi,
I'm sorry to dig out the old thread, but i'm trying to fix my N4 of similar problem but i have a question:
Is there a way to separate the LCD from the digitizer? This way i can keep the LCD and get only the digitizer to save cost as my LCD is still working perfectly. In ebay, an OEM Digitizer+LCD assembly cost USD100+ (http://www.ebay.com/itm/LCD-Touch-D...e_Replacement_Parts_Tools&hash=item3cd597ce9d) but the standalone digitizer only cost about half of it (http://www.ebay.com/itm/NEW-TOUCH-S...er_Cell_Phone_Accessories&hash=item43bf9536ff).
All the instruction that i can find so far on the internet involve replacing the entire assembly.
Click to expand...
Click to collapse
I wouldn't recommend doing so as a LCD+digitizer assembly cists around $60USD I did not think its worth seperating them but you can use a hairdryer to soften the adhesive
Sent from my SM-T310 using XDA Premium 4 mobile app
---------- Post added at 01:14 PM ---------- Previous post was at 01:12 PM ----------
jchidori said:
i recently cracked my front display, but it still works fine. i'm looking into replacement options and i don't believe the suggested link you posted is a good choice, because the front panel + digitizer + lcd are all fuzed together and i don't have a heat gun...
http://www.etradesupply.com/oem-lg-...nd-digitizer-assembly-with-front-housing.html
this option is probably best at 120... but then i just read this on ifixit:
"The battery is stuck to the frame with a lot of adhesive, so removing it without puncturing the battery can be difficult."
so... looks like the 160 pre shipping/taxes is the best choice
*****
just as an fyi - lg is saying their repair cost is from 40-150 dollars approx... i might just go this route since it doesn't void warranty and i won't screw anything up myself
Click to expand...
Click to collapse
Use a hairdryer
Sent from my SM-T310 using XDA Premium 4 mobile app

[Q] Help! Dropped phone, now touchscreen doesn't work. How to fix?

I dropped my phone
There is a small crack across the screen and the touch screen is no longer working. I suppose my only option is to buy a new screen/digitiser and replace it? I'm in the UK, where would I purchase a new screen from?
Thanks
Good old eBay.
Sent from my Nexus 4 using XDA Premium 4 mobile app
Same thing happened to mine.
Make sure you buy from a seller that will exchange the lcd/digitizer assembly if you have any dead pixels or "colored spots".
I bought from this person (I am not affiliated in any way) : http://www.ebay.com/itm/Black-LCD-D...e_Replacement_Parts_Tools&hash=item2c79726895
The tools are crap, be careful with battery screws and pulling back cover around SIM tray.

Categories

Resources