Related
Hello. I am struggling with this for three days now. I can't seem to make it work. So I think I need a detailed how-to because obviously I am doing something wrong.
I am using this clockwork recovery image: http://android.modaco.com/content/z...27215/oled-tft-2-5-1-8-clockworkmod-recovery/
Then I go to clockwork recovery mode and create 1GB ext partition. Wipe everything from everywhere.
After that I install paul's alpha3 prebake.
What happens is I have 1GB less storage on my class4 8GB SD, but don't see the ext3 partition (where should I look for it exactly)
In normal use the only way you'll know if its working or not is if you run out of space or not.
To find your ext partition look in '/sd-ext' or '/system/sd', you might need a file explorer that can use root privileges, I use estrongs. If the directories 'app' and 'app-private' are there then its working.
If your still sure its not working double check that the prebaked version comes with apps2sd...not all do.
Thank you. I think the prebaked alpha3 version doesn't have the apps2sd scripts. I tried to install Darktremor Apps2SD 2.7.5.2 but it killed my OS and had to flash it again. So is there any specific a2SD that I can use with this rom?
OK. I installed the Japanese jellyfish ROM yesterday and everything works like a charm so I guess prebaked alpha3 didn't have the apps2sd scripts.
Thank you again for your help, mate!
what is apps2ext?
It basically gets some storage space from the SD card and lies the system that it's part of the apps section of the internal memory
cynepmeh said:
It basically gets some storage space from the SD card and lies the system that it's part of the apps section of the internal memory
Click to expand...
Click to collapse
so it is basically like a different storage architecture for the SD card? Like we can have fat32, ntfs etc?
I am no expert here. From what I know - scripts create some symlinks so the app storage is actually placed on the sd, but the system doesn't know that and thinks it is still the old place. The path is the same, but it actually is something like a shortcut. The ext is probably because it needs to be linix partition or something...
This is what I think and it may not be true however
Hi, i am very new here and ilack some of the basic info. so i have couples of questions. thanks very much for your answers.
1. what is the internal memory of the htc hd2? and when you partition your sd to fat32 and ext3, will the internal memory be the sum of the ext3 and the phone internal storage?
2. when you want to flash your hd2 with a new rom. do you need to format both partitions of your sd card (fat32 and ext3)
3. when i tried the latest ultimate droid rom, i saw the author posted the rom and another thing called the layout (3.0.2.4_magldr_150M_partitionLayout_30M_cache). what does this do?
4. how do you make the phone to move or install apps in the ext3. and how do you back up those data and apps in the ext3?
and again, thanks guys for helping me out.
1 internal memory, do you mean what's available after a flash? 260 Meg or so with the small cm7 roms (typhoon for example)
No, the internal memory wont show the sum of internal plus ext BUT it will work as if it is. Say you install a 20meg program, internal mem goes down 20 but back up 20 after a restart.
2 no, when you perform the wipes through cwm it takes care of the ext partition and the .android folder on the fat32 for you.
Some apps may put data on the fat32, in which case you can delete those if you want or if you have isues.
3 the layout (clockworkmod, or cwm) sets up the various partitions on your nand (internal) memory, boot, system,cache,data. Without the layout there would be nowhere for the rom to flash into.
The main point of interest in cwm is the system partition size, big roms need big system partitions, sense roms for ex. need 250meg or more, typhoon needs 130. Flash a big rom to small layout fails, small rom on big layout wasted space.
4 you don't, if the rom says ap2sd enabled or words to that effect, it does it automatically. You can test this by loading up some apps then browsing the SD card on a Linux PC
When you run backups and such, it just does it, the phone has no idea that some of the info is on the SD, it treats it as internal.
samsamuel said:
Say you install a 20meg program, internal mem goes down 20 but back up 20 after a restart.
Click to expand...
Click to collapse
i dont understand why is that? so if the rom is apps2sd supported, it will automatically install apps to ext3. then it makes sense to me that the mem goes down, but then why it goes back up???
Example, 250meg internal plus 1gig ext partition.
internal memory shows as 250meg,, install 20 Meg app which goes to ext partition BUT the system displays internal mem as 230, , you reboot the phone and check again and internal memory shows as 250 again.
oh, thanks alot, i get it. but which backup solution is the best? and how does backup using clockworldmod work? does it make a backup file to sd card?
ljaypham said:
oh, thanks alot, i get it. but which backup solution is the best? and how does backup using clockworldmod work? does it make a backup file to sd card?
Click to expand...
Click to collapse
Hi,
It depends what you want to back up.CWM backup will take a snapshot of your entire ROM system,data,settings,everything.A bit like a ghost image of a drive on your PC.
This way, if you install a new ROM and there is a problem,or you don't like it,you can RESTORE your original ROM and everything is back the way it was before.
CWM backup saves to the sd card.
If you just want to backup data,use something like Titanium Backup.
hello,
i am havin annoyin issue with clockwordmod recovery 2.x.x.x.x, it doesnt see new files on sd card.. i have tried formating sdcard from recovery but it didnt format it at all.. next i formatted sd in windows, but still.. when i log into recovery it suppouse to show the files i've uploaded onto sdcard which were; cm7, nightly 40, new radio, gapps.. but instead it shows the old files which are not on the sdcard.. the problem is more annoying because i ve notticed that after formatting system, wipping cache etc.. so now i have only acces to broken? recovery and my wf gets bootloop all the time.. please help is there any way to flash the new cm7 from pc or somehow fix the sd card and flash new cm7 and fix the recovery??
i have searched @ google but i found notting..
please help ; /
cheers,
Have u tryed using unrevoked again n updateing with Rom manager
Do u have another SD card
Sent from my HTC Wildfire using XDA App
i cant use unrevoked and rom menager because my wf doesnt load os.. i was tryin to put update.zip and load it from sd card but it says "cant open E:/sdcard/update.zip (bad) installation aborted.", ive load even file as pc49img.zip, in bootloader it says it's parsing and it looks like everything is ok but still have no updatec cmw ;/.
and no i do not have another sd card ;/
Surely borrowing an SD card from some of your close ones shouldnt be an issue? Anyway, did you try using an RUU to get back to the default state?
i;ve tried to use ruu, it only sees my phone while the htc logo but it says it's not enough charged.. i think ill try to wait until green led comes up and try it again ;/
mlotson said:
hello,
i am havin annoyin issue with clockwordmod recovery 2.x.x.x.x, it doesnt see new files on sd card.. i have tried formating sdcard from recovery but it didnt format it at all.. next i formatted sd in windows, but still.. when i log into recovery it suppouse to show the files i've uploaded onto sdcard which were; cm7, nightly 40, new radio, gapps.. but instead it shows the old files which are not on the sdcard.. the problem is more annoying because i ve notticed that after formatting system, wipping cache etc.. so now i have only acces to broken? recovery and my wf gets bootloop all the time.. please help is there any way to flash the new cm7 from pc or somehow fix the sd card and flash new cm7 and fix the recovery??
i have searched @ google but i found notting..
please help ; /
cheers,
Click to expand...
Click to collapse
Sounds like you might have partitioned your card, and now are looking at two different partitions, one from windows, one from recovery. You could try repartitioning it from recovery, to make sure that you only have one FAT partition and one EXT and that they are in the correct order.
Mine has its FAT partition on p1, and ext2 on p2.
hey mate,
could you guide me how to do it? in recovery i have;
unmount system
unmount data
unmount cache
mount sd-card
when i click on mound sd-ext it says "ERROR MOUNTING SDEXT:!"
;/
i took off the sd card and formatted it then i mount it into the device and tried to choose zip file but it was unmounted in options so it didnt show me any files, next i've mounted sd card and left sd-ext unmounted and againt its the same, it shows me the old files which dont even exist anymore, i guess it maybe something with partitionin, but how to do it? could you guide me how to make one fat and one ext ? like u have? thx in advance
I partitioned mine from a linux PC with an SD card reader attached, but it should work from recovery as well.
From the Clockworkmod recovery menu, choose advanced and then partition sd card then choose the size you want for the ext partiton, then the size for the flash partition (if any). That should set them up correctly in the correct order.
Questions/Problems don't belong in the Development section <---please click link and read....moved to general...
i've wipped cache and during wippin it said that there is no sd-ext partiotion ; / it's something wrong with clockwork but i have no idea what.. it shows only the old files that i've loaded on sd before flashing with cm7 rc-2 ;/ the weird thing is that i remember that i updated cmw do newest 3.0.5... (something like that - the orange one) and it worked fine but next when i log into recovery it shows the older version oO
i successfuly manange to update cmw, i used adb in that purpouse and now everything works fine
Well....I have some problem here and I don't know how to fix it.
I installed CM7 to my SD card using the Verygreen method and the size agnostic 1.3 image, and can boot into CM7, and also installed GApps, and can boot into CM7.
The only problem is that out of my 16GB, only 400MB or so is active.
I installed Mini-Tools Partition Wizard to try and make Partition 4 take up the rest of the space, but I don't know how to do it.
I can't seem to get the 4th partition to over write whats on Partition 2 and 3...partition one is obviously the boot partition.
I don't know what to do....please help!
OMG I'm an idiot.
I was looking at system space, and not SD card storage from CM7.
Been racking my brain for hours about this, and yeah...just complete fail on my end.
What do you try to do? R u all set or still need help?
Yeah I'm good thanks.
I was wondering why I was only seeing 400MB on the Nook Color, but I wasn't looking at the SD Card, I was looking at the internal memory or something.
I found all the space under storage and space.
Hi,
First off if this is answered I am sorry.
I did a lot of searching and was unable to see the answer to this...
I am running CM7.1 off uSD. Install went well, and have no issues. That being said, I am unable to find out where on the card to sideload books. I have booted into CM7.1, turned on USB storage, and have 2 drives appear in win: MYNOOK and CM7 SDCARD. I used the size agnostic image, and it appears that there is only the single partition on the card, and in file explorer, it shows the correct card size for memory, but only the single partition.
The only folders appearing on the card are:
.android_secure
Android
LOST.DIR
I tried to manually copy the books, media, etc. folders into a My Files folder on this drive, without success.
There is no other partition to repartition (shouldn't have to do that with size agnostic?). I have no problem loading books into the MYNOOK book folder, which I assume is the internal device memory.
Here is my question. How/where do I sideload books to use the storage on the uSD card? Do I have to create the folders somewhere? If so where?
My goal is to utilize the storage available on the card, but be able to read the titles in the stock software. Is it possible to do this without rooting, or do I need to root for any reason to access the right folders on the card for storage?
THANK YOU ALL!!
klewlessnoob said:
I tried to manually copy the books, media, etc. folders into a My Files folder on this drive, without success.
Click to expand...
Click to collapse
In what way was it not successful? Did the files copy and just can't find them with a reader? If so which reader?
The book I transferred over was not found in the stock software when I opened my library. Is there somewhere specific I am supposed to place it on the card for the Nook to see it? Thanks!
For the stock reader, I think you must use the 1gb area of the internal memory drive, which shows up as a separate drive on your PC when you plug it into the computer. When you are in CM7 and connect to the pc, cancel when it tries to install a device for the NC. Check the notifications on the NC, you need to click a button to enable copying files from your pc, and take care to properly safely remove/eject before disabling that and disconnecting the cable from your pc. Better to get a separate reader and install it from the market (e.g., Cool Reader). You can also install the Nook app from the market, but then books need to go within (possibly in a specific subdir) of the "Nook" folder on SDCARD.
So there is no way to use the card memory to store books if I want to use the stock reader??
Should there have been a "NOOK" folder created on the SD card as part of the CM7 process? Is that a file that the user needs to create? If so, does it go in the same partition as the CM7, as that is the only partition my machine is able to see?
thanks again
Hopefully you'll get more input on this, but I think the point of keeping the Nook stock available (aside from not voiding your warranty) relates to use of B&N books. However you can eject your CM sd card and use another sd card if you want more space for user media for use with the stock app. I thought the media drive was the 1gb area, but now I'm not so sure because on mine the MYNOOK disk is much smaller.
When you are in the stock firmware... you are seeing the boot partition of the uSD...
You can write the boot partition... resize it... then run the installer...
I have done it in the past... set up a 2GB boot partition... then setup the ROM on uSD. You then have a 2GB partition you can use when in stock.
Thanks for the info. I am a bit confused by your suggestion, can you please offer a bit more?
By writing the boot partition, then resizing it, does that mean I can resize now, after I have already set everything up? If so, what do you mean by the installer? Or do you mean I have to wipe the card and start over? If that is the case (start over) do you mean wipe the card, create a small partition for the boot to install on? Would that requre the use of an image that is not size agnostic?
Either way, how do I get the file structure in place on the non boot partition for the nook to see files that are saved there?
Thanks again for any help you can provide!
I have never had luck resizing it after it has been booted in the Nook and all the partitions created...
I have written the size agnostic image to the card... resized the only partition created at that point... then put the ROM on it and booted it in the nook so the installer script (size agnostic recovery) can do the partitioning and install the ROM.
For the question of getting the file structure... I'd have to ask how you wrote the files on the uSD... were you CM or stock?
I had always planned on running cm from the card, so when I wrote the files to the card, I was stock.
If I follow what you are saying, then steps for me to try at this point would be:
1. Reformat card
2. Write the disk image to the card
3. Shrink the single partition on the card (where the image is)
4. Add the CM ROM to same partition as the image
5. Install card and boot device
If this sounds right, I have 2 questions.
What size should the partition be for the image and CM ROM, maybe 2GB?
Will the Nook "see" the non-CM partition and create the file structure for saving files on the 2nd partition at some point? In my searches I saw that in early versions, there was a requirement that the 4th partition on the card be expanded to use for storage, won't I only have 2 at this point?
Thanks again so much for the help!
When you write the image to the card... it will only be about 114 MB.... you will probably want to increase the size to avoid any possible size issues later (with ROM's getting larger)
If you plan to use the stock nook ROM as well as CM7... you will probably want 2 GB boot partition... otherwise if you plan to only run CM7 you probably only want about 250 MB.
You can modify vold.fstab on the stock ROM to use partition 4 of the SD for its SD use... then you could avoid the 2 GB boot partition.
What happens when you use VG's SASD... the boot image is about 114 MB... when you boot it in the nook it creates partitions 2, 3 and 4... 2 and 3 are ext3 partitions, partition 4 is fat... partition 4 is the one set for sdcard in the ROM booted from SD...
This is why you can modify stock vold.fstab to point to partition 4... then both ROM's will be putting stuff on the same partition for "SD Card"
I think I follow that, but my issue is that currently I am unable to see partition 2,3 or 4 which I think is part of my problem.
When I set up the card, I used the SASD method, and all I can see in both win explorer and partition software is the single partition on the card. Should there also be partitions 2,3, and 4? Do I have to do something to make those partitions viewable?
I am not comfortable enough with my skill level to attempt to modify the stock vold.fstab file on the device, and was hopeful that by properly setting up the card, I would be able to keep stock as is, and use the card to multipurpose, ie run cm7 on part and use the remaining space on card to store books to be read in stock firmware. I am still hoping to do that....thanks
As far as only seeing partition 1.... that is a limitation of Windows.
By following the advice pertaining to starting over and increasing the size of the Boot partition immediately after writing the image... before doing anything else... you can provide more space for the stock ROM to use on the SD... it will use partiton 1 (the boot partition) without the other modifications to vold.fstab
ok, confused again
If I start over, write image, then resize that partition with the image, am I going to use the "rest" of the card, NOT in that partition to use with storage? OR am I going to resize the partition with the image to be big enough to use as the partition to put books on?
If it is the former, don't I again run into the problem of how to find the other partitions, or will I create them when resize the first partition after writing the image?
Thank you!
You will only ever see the first partition of the sd card when booting from the stock OS. Also with the card inserted in a usb flash card reader on Windows you can only mount the first partition as a drive letter. But you can see and resize partitions with contiguous unallocated space using MiniTools Partition Wizard.
OK thats good to know. Do you know if the SASD install should have created other partitions when I installed to the card? The reason I ask is that even in Partition Wizard, I am still only able to see the 1 large partition with everything in it.
If I start over again, will I need to use the wizard to create partitions first, then write the image to the resized 2 GB first partition, or should I write image to card, resize the first partition? If the latter, will resizing the first partition autmatically force the other partitions to be seen? I am not sure of this option, as I can't see where in the process the other partitions are created? Is this part of the process when CM7 boots?
Thanks!
Write the image. Safely remove from pc. Reinsert to pc. Use minitool partition to resize the (only, at that point) partition to the size you want. Use Apply in minitool software. Quit minitool and resume with the card setup.
does the minitool at that point (resizing) create the other partitions, or will the card setup do that? Do I have to do anything else to the other partitions to make them visable to the stock nook so that they can be used to access books while in stock os?
The card setup will create the other partitions. The stock os is never going to see anything but the 1st partition. You would need a terminal emulator or rooted file explorer installed in the stock os in order to mount another partition.
If that is the case, that stock os will never see anything other than the 1st partition, then there really is no way to accomplish what I am trying to do, correct?
In other words, put CM7 on the card, then when I want to use stock, boot into stock and have the reader find books saved on the card?