Hello, today I brought home a fourth Nexus I had made the upgrade to 3.4 I have big problems with BT HF. Bad sound. When initiating a call, I turn off wifi. Do you ever have a similar problem? It's some solvable?
EDIT: Found out that the problem occurs only when it is paired and paid wifi in range. When initiating a call, wifi off and wants to again and again and connect it in some way causes outage call. I The fact that the wifi off is obviously wrong. I also tried on another Nexus 4 with 4.2.2. Ja mam 04.03 When wifi is paid or not ready to sit pairing, so it's ok.
You have a different experience? Is there any solution?
Related
I am having this horrible issue with my Wifi and bluetooth.
1. WIFI: When I turn on WiFi after a reboot it works flawlessly, connects to my wifi network and I can zoom around the net just dandy. As soon as I go out of range of WiFi or manually disconnect it it will NOT turn back on it says "Unable to start Wifi" until I do a full reboot. So annoying.
2.) Bluetooth: When connecting to my Headset it connects just fine after a reboot. HOWEVER, after pairing, if I put the X10 standby with the powerbutton before making a call it will drop the bluetooth audio connection and only play sound through the earpiece. Even though it SAYS it's still connected and paired. And THEN when I shut off bluetooth and try to turn it back on, pretty much the same as the wifi thing except I get no error message it just tries to initiate bluetooth and then sits for a few minutes and then I guess gives up and keeps the bluetooth shut off without any indication of failure.
I'm guessing it's defective but if anyone has had this issue, please speak up! And even better if you know how to solve it. Thanks!! =)
I too am having the same issue with wifi. Also my x10 is superslow on my wifi @ times. So i run a speedtest and I get 3MB, which is fast, but the phone isn't using that speed while browsing the internet.
Hello,
I experienced the same thing as you. Moreover I have a trouble with Bluetooth in my car. After few seconds (around 1 minute) of talk, I don't loose the BT connexion but nobody understand me !!!
Have you tried your BT?
Have you got a task killer running that's killing your bluetooth and wifi?
Sent from my X10i using the XDA mobile application powered by Tapatalk
hi
Im running the stock JK6 and rooted.
when Im running e.g. the liveview app my phone keeps some kind of freezing after a few minutes, first I tought it is app related but now I revieved my OBD2 scanner for my car and its just the same with the app "torque".
is this a hardware related problem or something wrong with this ROM.
did a HR several times and reflashed the ROM.
Edit: I noticed when bluetooth recieve or send data I cant get any other wireless date like on wifi or on radio.
please help
Seems to be a one time event with the data problem but the main thing keeps annoing me
Have you tried pulling the battery waiting 60 seconds placing the battery back in the phone and then rebooting?
Eh no cause on the galaxy tab the battery cant be removed
NightFire123 said:
hi
Im running the stock JK6 and rooted.
when Im running e.g. the liveview app my phone keeps some kind of freezing after a few minutes, first I tought it is app related but now I revieved my OBD2 scanner for my car and its just the same with the app "torque".
is this a hardware related problem or something wrong with this ROM.
did a HR several times and reflashed the ROM.
Edit: I noticed when bluetooth recieve or send data I cant get any other wireless date like on wifi or on radio.
please help
thanks
Click to expand...
Click to collapse
I don't Know, but if you have a Bluetooth PAN connection to the internet, then it should be not possible to have another connection to the internet. IP routing to the gateway would be confused if you could.
There are tools that "group" several separate internet connections into one virtual one.
no Im not using a bt PAN to connect the inet, only normal bluetooth data usage
Push
Just only me who is facing this annoing problem?
Same problem with OBD2 :s disable GPS reduc freeze loop. But not fully (30 minutes). Next time i will turn off Data conection.
Every time i've freeze now i see torque try reconnect to OBD2, seem like BT of SGT turned off or time out
I am having the same problem. As long as I have bluetooth turned on, it will hang the Tab within 30 min. All bluetooth connections are definitely gone. Turning off the bluetooth won't help. The only way is to reboot and never turn bluetooth on.
BTW, I have tried connecting LiveView or a normal bluetooth headset. Both cause the same problem.
I am on JK2.
It seems it is bluetooth driver conflicting with any other data connections.
Did a further testing. Disabled Wifi, but doing data communication via 3G network while turning bluetooth on. The tab hangs in a few minutes. Found a process called 'btld' sucking up all the CPU circle.
Any ideas what 'btld' is?
Thought this should not be a hardware problem because bluetooth works fine when all data connections are off and Wifi/3G data works fine when bluetooth is off. It must be some sort of default setting isn't correct. If this is the case, then root would be a must before manually tuning any parameters.
Found root cause. It is actually the SonyEricsson LiveView software causing troubles. After removing, everything goes well.
Checked on SonyEricsson's web site, it seems Froyo is yet to be supported.
try to use WO Webcam B-Lite out of market, you can open a bt connection by pressing activate and then while running, close via taskmanager, voila the freeze begun
I've got galaxy Tab and galaxy S, and torque badly freezes the devices almost every time I exit the application. It cannot be an hardware fault since I use lot of bluetooth devices and always 3g connected, never had issues. Just with torque, and I don't have any "sony liveview" thing.
Reading on the comments of Torque it seems that also other devices have the same freeze issue (especially a phone called "Evo 4G"). Many months ago I sent a mail to the developer explaining the bug but he bumped me away replying that the app is tested and working on GalaxyTab (and obviously it's not true, or he did some mistake in testing). Now lots of people with this Evo 4G are complaining and the developer is trying to fix. let's hope..
I have an annoying problem with my device. I'm able to find other bluetooth devices and connect my omnia with them olny when the wifi is on. After the connection, for example to my speakers, I can also turn off wifi and the bluetooth streaming continues without problems, also if i disconnect my device (mantaining the bluetooth toggle on) and then i re-connect it. Someone has a solution? It isn't a big problem, but quite annoying
My first Omnia did this. I've jsut had it replace under warranty for something else and my new one doesn't do it.
It was annoying I agree.
"Interesting". I have the opposite problem - whilst WiFi is active BT doesn't work. Sent my phone to be services a week ago so we'll see.
Please could you post your phone version maybe?
DJBlaster-303 said:
Please could you post your phone version maybe?
Click to expand...
Click to collapse
Software version?
Ok so i got my Nexus 4 yesterday and of course BT (Motorola Elite Silver) connects and then within 3/4 seconds will disconnect and it does this continuously. I really need BT to work. I have flashed cm10.1-rc4, night-lies and other roms as well and the same problem persists. I went to three, thats right three T-Mobile stores today and tested the same BT on their phone and it worked flawlessly. One of the Nexus 4 had Android 4.2 (JOP40C) and base-band .33 while the other two had 4.2.2 and base-band .48. Wifi was ON on all these devices and i did not notice and issue with them. My BT stayed connected for over 5mins and i even turn it on/off as well as the BT toggle on the phone and every time it worked without disconnecting or exhibiting any issue. I should also mention that i have flashed base-band .33 and the problem still exists. Does anyone know where i can download a dump of the Nexus 4 for t-mobile?
Is it possible that i have a faulty hardware?
Is there a way to unload the BT stack and reload it to test?
I did discover that when i connect the phone to my computer and the "usb debugging connect" message shows up, the BT/WIFI does not disconnect and works as normal. Now if i disconnect the cable it starts acting up again. Maybe a dev here will be able to figure it out now but that is the behavior i have noticed all through out my testing.
PS: i also have a BlueAnt Q2 and it does connect and sometimes disconnects. WIFI when the BlueAnt Q2 is connected becomes really unstable and disconnects.
Are you undervolting? Any custom kernels? If not, try flashing one. Does it work fine with WiFi off?
lopezk38 said:
Are you undervolting? Any custom kernels? If not, try flashing one. Does it work fine with WiFi off?
Click to expand...
Click to collapse
No, i am not undervolting. I have tried CM10.1 nightlies and RC4. Even with WIFI off the problem still continues. I am trying to download google 4.2.1 and see if it still a problem.
I use a Bluetooth headset too, and from what I know, in many ROMs, Bluetooth does not work well with WiFi. If both is on, my WiFi will definitely lose connectivity, and/or my Bluetooth will lose connectivity. Either way, they just cannot coexist together.
Turning off my Wi-Fi is the only way I can get my Bluetooth to work.
I think our units are defective. I already called Google and they are sending NEW replacement out to me asap. I don't get how the t-mobile store once worked. The weird part about mine is if the phone is connected to my PC, it works fine. I just can't figure it out.
Tested another one today and it worked flawlessly.
Recently noticing the Bluetooth
Doesn't turn on from the quick settings
Or the Bluetooth Settings.
Anyone else experience this?
Any known fixes or advice?
No problem here, and I have been using it almost every day for about a month
Sentinel_35 said:
Recently noticing the Bluetooth
Doesn't turn on from the quick settings
Or the Bluetooth Settings.
Anyone else experience this?
Any known fixes or advice?
Click to expand...
Click to collapse
yah, no problem here either. I guess you already tried rebooting the device....
I have had issues like that with BT, reboot resolved the issue. Seems like the software on this phone is not good at handling sustained connections, WiFi or Bluetooth. I see wifi also being disconnected and re-connected quite often.
coolmaster121 said:
I have had issues like that with BT, reboot resolved the issue. Seems like the software on this phone is not good at handling sustained connections, WiFi or Bluetooth. I see wifi also being disconnected and re-connected quite often.
Click to expand...
Click to collapse
My X727 shipped with 18s and got the two OTAs to 20s recently. Never had any problems with Wifi or BT connections - music streaming in car and phone calls. Might depend on how your AP environment is set up since I've never noticed issues with sustained connections.
Sometimes I would notice the cellular data connection drop out and require restart, but nothing with Wifi or BT.
Sent from my SM-G935W8 using Tapatalk
Thank you everyone for your input..
A reboot usually fixes this..
But really shouldn't have to resort to that every time
I've had issues with the BT when going from my car to BT headphones, where it will connect for phone audio but not media audio. Turning BT of then back on again "fixes" it, but it's a minor hassle. When I first updated to 20s, BT wouldn't turn on, but a reboot corrected that and I hadn't had any issues with toggling BT on and off since.
Sent from my LEX727 using Tapatalk
This happened once, reboot solved the issue. I used to use bluetooth a lot, but rarely now as my current car HU doesn't have BT. Didn't have any problems when I used it a lot.
I've had the same issue for the past couple weeks. It only seems to have this issue with the cars BT. It may be a minor annoyance, but it can cause some big issues seeing as how messing with your phone can get you pulled over now.
I have this issue. I use Bluetooth in my cars and Android wear. I never notice an issue in the car. But sometimes I'll notice on my android wear watch that's it's disconnected from the phone. I'll check the phone and Bluetooth is off and won't turn on. A reboot usually fixes it. Odd.
Same issue here
Sentinel_35 said:
Recently noticing the Bluetooth
Doesn't turn on from the quick settings
Or the Bluetooth Settings.
Anyone else experience this?
Any known fixes or advice?
Click to expand...
Click to collapse
This seemed to go away for me when I turned off all of the aggressive memory management features.
The updates seem to have fixed this though..
I can't turn on Bluetooth from the quick access menu or even if its on.. its doesn't show on the quick access menu..
Anyone notice that lately?
Seems to be not working even if you turn off and try to turn on from the quick access menu. I am on 21s.
Sentinel_35 said:
Recently noticing the Bluetooth
Doesn't turn on from the quick settings
Or the Bluetooth Settings.
Anyone else experience this?
Any known fixes or advice?
Click to expand...
Click to collapse
The following fixed it for me:
Dial *#*#46360000#*#* and uncheck 'Enable background resource control'.
Reboot
Scanning Settings
I think y'all should try disabling Bluetooth Scanning in Location Settings. It is a problem in the stock ROM as well as LineageOS ROM(which I am currently using).
Just try disabling Bluetooth Scanning in Location Settings (three dot menu)..... I'm sure it'll help.
Man589 said:
I think y'all should try disabling Bluetooth Scanning in Location Settings. It is a problem in the stock ROM as well as LineageOS ROM(which I am currently using).
Just try disabling Bluetooth Scanning in Location Settings (three dot menu)..... I'm sure it'll help.
Click to expand...
Click to collapse
Those posts were made over a year ago. They figured it out already.
It's 2018 and I have the same issue. What do I do?:crying: