I have two wifi signals in my house, I need one of them to use wake on lan connected to a media pc. this one doesnt have any internet access. the other signal, my main one, does. I need to save the credentials for both of them so forgetting the network is useless to me. My phone is constantly choosing whichever network it feels like and I have no way to change this. Is there some setting or config file I can change to prevent it from autoconnecting to whatever saved networks it wants? I don't want it to autoconnect to anything.
Hello.. U want your phone to connect to one of the networks which is if your preference right.. From what i have seen the phone connects to the strongest network available with a pass key.. So...its up to you how the network can be made more accessible
Sent from my Nexus 4 using Tapatalk 2
Hey is anybody having wifi connection issues. I have tried at work and at home. My wifi will connect at a weak connection and withing 2 minutes it will disconnect and give me an error saying "poor connection". Good thing I have unlimited data otherwise I'd be screwed. I'm going to the store to exchange note 3's and see if they fixes the wifi problem.
I have the same exact issue
jmichaels1982 said:
I have the same exact issue
Click to expand...
Click to collapse
Go to setting, Wi-Fi, menu, advanced and turn off auto network switch
vtcats said:
Go to setting, Wi-Fi, menu, advanced and turn off auto network switch
Click to expand...
Click to collapse
My auto network switch came defaulted to off but this is still happening to me....
I clicked the auto-network box, but for some reason when I'm at home and using my home's WiFi both the 4G LTE AND WiFi icons show up. In my S3, it used to automatically switch to my known WiFi when I come home and switch automatically to 4G LTE when I walk outside of my WiFi router's range. How do I get it to do the same and display only one source of internet connection?
Well I called vzw technical support. They are sending me to the closest corporate store to exchange for another note 3. I hope this works. ....
I'm running a rooted GS5 and I'm using it to link to a wifi controller on a drone. However, because the drone doesn't provide internet, the wifi manager auto-connects to my wireless SSID and severs the connection with my drone. How can I "lock" onto the drone's SSID? In the older GSX there was an advanced setting in wifi settings to not allow auto switching of wireless networks. Where is that functionality in the GS5?
There may be an advanced wifi option to do so, but I haven't looked.
Your objective could be done with Tasker and iptables. But I'm going to make the assumption that if that didn't occur to you already, that you don't use those programs and there is a learning curve to scripting. So, just grab an app to do this e.g. Wifi prioritizer.
Done
.
.
Lack of option - that is correct - there is no option to disable scanning. The only reliably sensible option left to you is to forget your home wifi network before connecting to the drone and then establishing a connection with the drone.
That's pretty much it - of course on rooted device you could write scripts to engage/disengage a specific network - but to be honest I'd call that an overkill.
Anyone able to get this to work on your turbo? I enabled it on both my chromecasts, but I can't see them if wifi is off... [emoji31]
Guest access sets up a direct wifi connection between the user's phone and the chromecast. You don't have to be on the same network but you have to have wifi on.
Edit: Actually, it appears that on initial setup, the Chromecast broadcasts an audio tone which the phone receives and then a wifi direct connection is established. Or it's magic. Not sure now.
I thought so too, but even with wifi on, it doesn't see them. (I removed my wifi so it didn't pick it up by default.) I am guessing it just won't work on the Moto phone... Like screen casting didn't on the maxx...
Got it. Need to make sure "scanning is always available" is turned on under wifi -> advanced.
First my setup:
XT1572
TruPureXMM 2.6.3
frankenclark kernel 0.8
Is there anyway to connect to my homewifi faster? I've selected to only show 5ghz wifi networks and I'm only seeing two when I enable wifi yet it dosen't connect to my wifi for maybe 5-10 seconds. Is this a problem with the rom/kernel? I don't remember connecting being this slow when I was on stock 5.1.
If I can change connect speed through the rom/kernel that would be best. Otherwise is there an app that can do it?
Heaby said:
First my setup:
XT1572
TruPureXMM 2.6.3
frankenclark kernel 0.8
Is there anyway to connect to my homewifi faster? I've selected to only show 5ghz wifi networks and I'm only seeing two when I enable wifi yet it dosen't connect to my wifi for maybe 5-10 seconds. Is this a problem with the rom/kernel? I don't remember connecting being this slow when I was on stock 5.1.
If I can change connect speed through the rom/kernel that would be best. Otherwise is there an app that can do it?
Click to expand...
Click to collapse
i cant see why you would choose 5ghz over 2.4ghz maybe thats the reason for your problem
5Ghz allows for faster throughput (more bandwidth available) - uses 80 mhz channels vs 20 mhz on the 2.4ghz.
I noticed the slow connection too. Seems if you open wifi settings, it connects immediately.
Heaby said:
First my setup:
XT1572
TruPureXMM 2.6.3
frankenclark kernel 0.8
Is there anyway to connect to my homewifi faster? I've selected to only show 5ghz wifi networks and I'm only seeing two when I enable wifi yet it dosen't connect to my wifi for maybe 5-10 seconds. Is this a problem with the rom/kernel? I don't remember connecting being this slow when I was on stock 5.1.
If I can change connect speed through the rom/kernel that would be best. Otherwise is there an app that can do it?
Click to expand...
Click to collapse
Did you try changing the channel in your router?
Haven't tried changing the channel. Will report back after I get home after work.
Heaby said:
First my setup:
XT1572
TruPureXMM 2.6.3
frankenclark kernel 0.8
Is there anyway to connect to my homewifi faster? I've selected to only show 5ghz wifi networks and I'm only seeing two when I enable wifi yet it dosen't connect to my wifi for maybe 5-10 seconds. Is this a problem with the rom/kernel? I don't remember connecting being this slow when I was on stock 5.1.
If I can change connect speed through the rom/kernel that would be best. Otherwise is there an app that can do it?
Click to expand...
Click to collapse
I can say that problem is with ROM.
It has very slow auto connection time.
To connect faster I am using:
- drop down notification menu - tap wifi menu where its possible to choose wifi's from that setting - just wait, as soon as it turns on wifi and actually starts to scan area it will auto connect faster than when you just turn on wifi and wait.
I confirm this behavior on XT1575 as well. It takes quite a long time to connect when i enable WiFi.
But if I enter the WiFi settings, it connects instantly.
And i think it's like this since Android 6. I don't recall having this issue on Android 5.
I can't say I've noticed any problems connecting to WiFi networks at home.
I'm running 6.0 stock (Feb 2016 security update) rooted to hell and back.
I have access to five different WiFi networks at home, and am registered to all five for convenience.
I use an app called Best WiFi to auto-connect to the strongest signal whenever my current signal drops below a user-configurable strength threshold.
Perhaps that's the reason I'm not feeling this issue?
https://play.google.com/store/apps/details?id=com.pintacdesign.bestwifi&hl=en
I've been using this app for years, since Android 4.0, and across four or five different devices now.
Edit - Before the inevitable questions. I live in a basement and have my own personal WiFi network down there. Upstairs, we have two network piping out of the office (2.4 GHz and an associated 5 GHz link). For the far side of the home, we have a WiFi extender that mirrors and extends those two signals coming from the office (2.4 GHz-Ext and 5 GHz-Ext).
My report:
Whether connecting to 2.4 Ghz (20/40 Mhz) or 5 Ghz (20/40/80 Mhz) the connectspeed is between 5-15 seconds if singlepressing on the wifitoggle. If longpressed it takes about 2-3 seconds. Either this is a problem with the rom or this is the intended behaviour in Marshmallow. But this was not the behaviour in Lollipop as far as I remember. Of course you could argue this a nonissue since longpressing the wifitoggle is the solution. However I would like singlepressing to behave the same since I use Gravitybox to hide the statusbar when pressing 2-state tiles.
Yeah this is a huge pain in the ass. I set up a WiFi shortcut on my home screen so I would start using WiFI more to save battery, but it takes so long for it to finally connect. I also have Tasker turn WiFi on in the morning when my alarm goes off, and it takes so long. It took a few seconds in Lollipop, and now it takes 10+ seconds in Marshmallow. It's ridiculous. Anyway there is no real fix except going into the settings or tapping the drop-down toggle multiple times, as others stated.
I notice the same thing too. Wifi takes long to connect on boot. When I go to connect wifi off, it always shows the routers in the previous area before showing what's in the current area. I turn wifi off when leaving home. I'll connect to a public router, but will still show my home router before showing any around me. I had a Galaxy S5 before and wifi connected right away.
Heaby said:
First my setup:
XT1572
TruPureXMM 2.6.3
frankenclark kernel 0.8
Is there anyway to connect to my homewifi faster? I've selected to only show 5ghz wifi networks and I'm only seeing two when I enable wifi yet it dosen't connect to my wifi for maybe 5-10 seconds. Is this a problem with the rom/kernel? I don't remember connecting being this slow when I was on stock 5.1.
If I can change connect speed through the rom/kernel that would be best. Otherwise is there an app that can do it?
Click to expand...
Click to collapse
First off, I am not sure if the OP is turning wifi on first when arriving at home and then seeing the delay, or if Wifi is already ON when you arrive home (EDIT: just reread OP and it appears you are turning it ON - see below), but I leave Wifi ON all the time and do not see any delay when I get home (I pull into my garage and my apps are already updating via my home wifi before I park my car).
There are various steps involved in "getting onto wifi" that don't just involve the client device (authentication to the access point; getting an available IP address from your AP or a separate router, and the stability/software quality of those devices, for example). but you may want to consider a few things to speed up the process at home regardless if Wifi is on, or you turn it on first:
1) go into "Saved Networks" in your wireless settings and "forget" any networks you don't need
2) make sure the device on your network issuing IP addresses (DHCP server software built into your router or AP, whichever you use - also make sure only ONE of the them is acting as DHCP server) has enough available IP's in its pool - better yet, assign the same IP to your MotoX's MAC address (set up a static IP in your routers LAN/DHCP settings if it has them so your MotoX gets the same IP every time)
3) while I agree with another poster about avoiding the 2.4 GHz for Wifi (congestion and more interference), even many 802.11n client radios today don't support 5GHz so keep that in mind if you shut down 2.4GHz in your home completely
4) Use WPA2 with PSK for authentication AND make sure your home SSID is being broadcast (not hidden, which they really aren't anyway with the right tools - A strong WPA2 PSK password is better security even if the world can see your SSID.
4) If you do turn Wifi On and Off, consider leaving it ON and see if that helps your connection time (I suspect it will If you are concerned about battery drain, you can disable wifi during sleep in wireless settings, but I don't have a battery issue with Wifi on 24/7. The Wifi radio beaconing for SSID's or even staying connected to an SSID in the background, when you're not using Wifi, is a very minimal power drain compared to having your screen brightness higher than you need (you can however turn off the annoying wifi network notification setting).
Hope this helps.
For those with this delay, are you running xposed with gravitybox? Tried disabling gravitybox? It maybe GB that's introducing the delay. Need feedback from those running stock.
If stock exhibits similar behavior then it's probably characteristic of the quick toggles in the moto x. The delay appears to be in the actual wifi connection phase, not acquiring ip. As once it actually connects, IP acquisition is almost instant. Toggling wifi off then on directly through settings is very fast, maybe 3-4 seconds.
I have a moto g lte (xt1045) on cm13 which takes about 5 seconds to connect after toggling wifi off then back on. The moto x takes a good 15 seconds.
ech1253 said:
First off, I am not sure if the OP is turning wifi on first when arriving at home and then seeing the delay, or if Wifi is already ON when you arrive home (EDIT: just reread OP and it appears you are turning it ON - see below), but I leave Wifi ON all the time and do not see any delay when I get home (I pull into my garage and my apps are already updating via my home wifi before I park my car).
There are various steps involved in "getting onto wifi" that don't just involve the client device (authentication to the access point; getting an available IP address from your AP or a separate router, and the stability/software quality of those devices, for example). but you may want to consider a few things to speed up the process at home regardless if Wifi is on, or you turn it on first:
1) go into "Saved Networks" in your wireless settings and "forget" any networks you don't need
2) make sure the device on your network issuing IP addresses (DHCP server software built into your router or AP, whichever you use - also make sure only ONE of the them is acting as DHCP server) has enough available IP's in its pool - better yet, assign the same IP to your MotoX's MAC address (set up a static IP in your routers LAN/DHCP settings if it has them so your MotoX gets the same IP every time)
3) while I agree with another poster about avoiding the 2.4 GHz for Wifi (congestion and more interference), even many 802.11n client radios today don't support 5GHz so keep that in mind if you shut down 2.4GHz in your home completely
4) Use WPA2 with PSK for authentication AND make sure your home SSID is being broadcast (not hidden, which they really aren't anyway with the right tools - A strong WPA2 PSK password is better security even if the world can see your SSID.
4) If you do turn Wifi On and Off, consider leaving it ON and see if that helps your connection time (I suspect it will If you are concerned about battery drain, you can disable wifi during sleep in wireless settings, but I don't have a battery issue with Wifi on 24/7. The Wifi radio beaconing for SSID's or even staying connected to an SSID in the background, when you're not using Wifi, is a very minimal power drain compared to having your screen brightness higher than you need (you can however turn off the annoying wifi network notification setting).
Hope this helps.
Click to expand...
Click to collapse
gpz1100 said:
For those with this delay, are you running xposed with gravitybox? Tried disabling gravitybox? It maybe GB that's introducing the delay. Need feedback from those running stock.
If stock exhibits similar behavior then it's probably characteristic of the quick toggles in the moto x. The delay appears to be in the actual wifi connection phase, not acquiring ip. As once it actually connects, IP acquisition is almost instant. Toggling wifi off then on directly through settings is very fast, maybe 3-4 seconds.
I have a moto g lte (xt1045) on cm13 which takes about 5 seconds to connect after toggling wifi off then back on. The moto x takes a good 15 seconds.
Click to expand...
Click to collapse
@ech1253: I've checked everything you suggested and you are right, having wifi on will make it connect almost instantly.
@gpz1100: I'm running xposed with gravitybox. Disabling gravitybox didn't change anything. I'd rather not uninstall xposed and/or go back to stock so if someone on stock without xposed could chime in that would be helpful.
It does it on stock android 6 for me and on a custom rom as well. Since day 1 with the moto x but at least wifi works just a long delay that no other android flagship from suffers from. :S
hexxor93 said:
It does it on stock android 6 for me and on a custom rom as well. Since day 1 with the moto x but at least wifi works just a long delay that no other android flagship from suffers from. :S
Click to expand...
Click to collapse
That's...not encouraging
Hopefully it's a softwarebug.