[Q] How to install new small security patch on JB 4.3 - Nexus 4 Q&A, Help & Troubleshooting

I have rooted my Nexus 4 with Tool Kit and flashed it with stock 4.3 image. Few days later came new small security patch for 4.3. Now every few days I get the notification on my phone but when I try to let it install, it does not get installed.
Here is phone info:
Android version: 4.3
Build number: JWR66V
Kernel: 3.4.0-perf-gf43c3d9
I will appreciate your help. Is this update available as a zip file on the forum? if it is, then I can side load it on my rooted phone.

I will appreciate any help.

I have this too
If it helps, I have to problem too.
I have rooted my phone and installed ClockworkMod Recover v6.0.2.3 but have not installed any custom ROM or other changes (that I know of).
I periodically get a messge an update has been downloaded, but when I attempt to install it, ClockworkMod informs me:
Code:
E: failed to verify whole-file signature
E: signature verification failed
Since I don't know what it is, I abort the install, but I can't tell what is happening. I would also appreciate any help.
Regards,
Bret

rookie8155 said:
I have rooted my Nexus 4 with Tool Kit and flashed it with stock 4.3 image. Few days later came new small security patch for 4.3. Now every few days I get the notification on my phone but when I try to let it install, it does not get installed.
Here is phone info:
Android version: 4.3
Build number: JWR66V
Kernel: 3.4.0-perf-gf43c3d9
I will appreciate your help. Is this update available as a zip file on the forum? if it is, then I can side load it on my rooted phone.
Click to expand...
Click to collapse
Im not good with these type of thing but here http://forum.xda-developers.com/showthread.php?t=2145848 alot of guys here can help you, and i think the OP already has a solution on the 1st page

bcw1000 said:
If it helps, I have to problem too.
I have rooted my phone and installed ClockworkMod Recover v6.0.2.3 but have not installed any custom ROM or other changes (that I know of).
I periodically get a messge an update has been downloaded, but when I attempt to install it, ClockworkMod informs me:
Code:
E: failed to verify whole-file signature
E: signature verification failed
Since I don't know what it is, I abort the install, but I can't tell what is happening. I would also appreciate any help.
Regards,
Bret
Click to expand...
Click to collapse
Yes, I have also installed ClockworkMod Recover v6.0.2.3 and running stock ROM as well. . If this update is available as a zip file then we can install it. It should not be just two of us having this issue. Everyone who rooted phone should have same issue.

HeyyMyNameIs said:
Im not good with these type of thing but here http://forum.xda-developers.com/showthread.php?t=2145848 alot of guys here can help you, and i think the OP already has a solution on the 1st page
Click to expand...
Click to collapse
Thanks for pointing towards the right direction. I tried to side load the zip but it failed. I will post the question in the other thread.

Related

OTA update in update.zip format with root options

The update in conventional zip format, with root options is here!
P
Works mint! I was running Modoco 1.3 ROM, heres the steps I performed:
recovery install: update-nexusone-ERE27-signed.zip
recovery install: update-nexusone-radio-32.24.00.22U_4.03.00.21_2-signed.zip
./fastboot-linux boot boot.ERE27.superboot.img
./fastboot-linux flash zimage zImage-2.6.29.6
./adb remount
./adb push bcm4329.ko /system/lib/modules/bcm4329.ko
Can I flash this manually WITHOUT being rooted?
I posted a thread on updating without root: http://forum.xda-developers.com/showthread.php?t=627533
Modaco's page confused me a little.
Does the "Main update" include the radio update, or did he split that off and they're completely separate?
Can the main update be installed using a rooted, but stock, rom and recovery?
In other words, if I just want exactly what the OTA would give me, on my rooted (by superboot) but stock N1, what do I need to do?
Thanks!
I'm completely stock rom / not rooted and I just did this:
http://androidforums.com/nexus-one/41504-how-force-2-2-2010-ota-update.html#post316090
1. Get the update from Google: http://android.clients.google.com/updates/passion/signed-passion-ERE27-from-ERD79.a487b405.zip
2. Put the update on your SD card & rename it to update.zip
3. Boot in recovery mode (hold down trackball + power)
4. Go to bootloader -> recovery
5. Now there's a picture of a droid with a triangle
6. Press the power button + volume up
7. Apply sdcard:update.zip
8. Updating
9. Reboot system now
10. Enjoy the multitouch
Click to expand...
Click to collapse
Worked great.
Thanks Paul. That's what I first tried, and it failed. I posted the details here, but haven't heard anything back yet.
http://forum.xda-developers.com/showpost.php?p=5528501&postcount=118
Mine is ROOTED, but stock, so.....
tonyx3 said:
Modaco's page confused me a little.
Does the "Main update" include the radio update, or did he split that off and they're completely separate?
Can the main update be installed using a rooted, but stock, rom and recovery?
In other words, if I just want exactly what the OTA would give me, on my rooted (by superboot) but stock N1, what do I need to do?
Thanks!
Click to expand...
Click to collapse
I'm in the same exact boat as you. I rooted my phone last week because i was eager to get multitouch working, so i followed this tutorial:
theunlockr[dot]com/2010/01/21/how-to-enable-multitouch-browsing-on-your-nexus-one-using-the-native-browser/
So now when i try to apply the OTA update manually in recovery mode i get:
Code:
E:Can't open /cache/recovery/command
-- Install from sdcard...
Finding update package...
Opening update package...
Verifying update package...
Installing update...
Verifying current system...
assert failed: apply_patch_check("/system/app/Browser.apk" , "68a23e4ac9d6a783b6166b24ab79d12c6544e8f4" , "4da6d3fd306ef7fc81e19147da395f13221e70307")
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted.
Does anyone know what i can do to get this OTA up and running? Im rooted but i havent flashed any custom roms or recoveries either.
This is my first android phone so i'm a bit of a noob and new to the scene. Any help would be greatly appreciated
Paul22000 said:
Can I flash this manually WITHOUT being rooted?
Click to expand...
Click to collapse
yes, just did it 5 min ago
PhantomRampage said:
I'm in the same exact boat as you. I rooted my phone last week because i was eager to get multitouch working, so i followed this tutorial:
theunlockr[dot]com/2010/01/21/how-to-enable-multitouch-browsing-on-your-nexus-one-using-the-native-browser/
So now when i try to apply the OTA update manually in recovery mode i get:
Code:
E:Can't open /cache/recovery/command
-- Install from sdcard...
Finding update package...
Opening update package...
Verifying update package...
Installing update...
Verifying current system...
assert failed: apply_patch_check("/system/app/Browser.apk" , "68a23e4ac9d6a783b6166b24ab79d12c6544e8f4" , "4da6d3fd306ef7fc81e19147da395f13221e70307")
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted.
Does anyone know what i can do to get this OTA up and running? Im rooted but i havent flashed any custom roms or recoveries either.
This is my first android phone so i'm a bit of a noob and new to the scene. Any help would be greatly appreciated
Click to expand...
Click to collapse
http://www.nexusforum.net/nexus-one-help-forum/493-how-manually-retrieve-new-update-your-nexus-one.html#post2000
check that guide out, it was simple and easy to follow...
Thanks JHaste.
But those are pretty much the exact instructions I followed that gave me the error.
My phone is rooted, but running the stock rom.
No custom rom, no patched browser.
The only changes I've made since rooting it are to copy some Thai fonts into the fonts directory.
The exact specifics of my error are posted in:
http://forum.xda-developers.com/showpost.php?p=5528501&postcount=118
Very similar to what PhantomRampage listed, but a slightly different cause, I think... (his is an error on Browser.apk)
JHaste said:
-Removed quoted link since i cant post them yet-
check that guide out, it was simple and easy to follow...
Click to expand...
Click to collapse
Thanks for trying but as i said before, i tried that and it fails because i have an unlocked bootloader.
Sorry if my first post was confusing, ill try again.
I unlocked my bootloader and rooted my N1 the other day, i also modified and added some files to get pinch-to-zoom working on the native browser. To do that i followed some tutorial on theunlockr, i cant post direct links so google it and you'll find it easily.
So, now i want to apply the new OTA update but it fails, either because i have root access or because i tampered with the browser files im guessing.
Knowing all that, what can i do to install the new update?
Also, will i have to download patched updates from now on since i rooted my phone? I'm really hoping i dont have to; i'd prefer to install the ota updates as they come out officially.
might have found a solution
check out:
forum (dot) androidcentral (dot) com / google-nexus-one/6469-will-my-n1-receive-ota-ere27-update-cyanogen-mod (dot) html
seems to be just what i was looking for but i think i want to re-flash the stock firmware instead, i want to stay as stock as possible so i can install future OTA updates without having to go through all this trouble. Can anyone help me with that please?
Anyways, i hope my link will help some people. Sorry for the double post
Closing Double Thread (it's also at Development).
Please do not duplicate threads if not necessary.

Recovery zip signature verification failing

I recently exchanged my Nexus One for another guy's N-1 which works on ATT 3G. I had done a nandroid backup of my phone, and used that same image to recover the "new" phone to exactly how it was before the switch. It failed first, but after I moved my BCDS folder to the new HTPXXX folder, it went through.
However, now when I try to flash a zip from recovery (Amon-RA 2.2.1), I always get the "Signature verification failed" error. I tried flashing newer radio, after verifying the MD5SUM. I tried flashing the 0.35.017 HBoot. Both of them failed. I am wondering if it's because of the mismatched nandroid recovery I did.
Any help would be greatly appreciated -- thanks!
Edit: Needless to say, after disabling signature verification, everything flashes correctly.
Oops I just realised I should not be posting questions here -- sorry! Can someone please lock this thread?
How to update the Nexus Android 2.2 to Android 2.3.4? Need to unlock the bootloader?
How to update the Nexus Android 2.2 Android 2.3? Need to unlock the bootloader?
I tried but could not update or pro 2.2.1. It says update error and aborted.
I ask for help.

[Q] CM MOD on SGS

Hey guys,
so, a lot of my quetstions will be already posted, but i can´t find them all.
So i hope i annoy no one here ;-).
Ok, now to the important:
I have a SGS until 6 month. over the time i learnd a lot of android and i´m very lucky with them.
Then i heard from cyanogenmod. and all i read about it is great.
i have knowledges about root of linux an so of android.
So, during my research i have a lot of question before i flash my sgs:
- i found only one forum enty where i read i have to format all partitions.
So, how do i flash a sgs?
i have a modded boot rom with root and clockwork mod.
I tried a backup of the system.
the rom manager don´t show ne the cm7 mod for my device.
Do anyone know why? because the RC status?
When i get an error, how can i rollback my firmware with the backup?
Which pc software i need?
my plan ist to flash the sgs with the experimental version, no nightly build.
CWM makes al lot if IMG files. the cm7 zip has only one IMG.
So, i hope anyone can tell some or send my some nice links.
thanks a lot :-D
ravn
Use this
Boom, that's how it's done folks.
Sent from my I9000m running Cyanogen Mod Nightly
Hey,
thanks guys.
So, can anyone explain me how i can go back to the original rom if i got any probs or even i want?
So, i made a backup with Titanium Backup (premium user) and secondly with CWM.
So, i copied them to my PC.
CWM makes some IMG files. So, how can i rollback them to my device?
Also if i try to create a rom image with the rom manager the recovery manager makes a error.
:-D
So, i get by saving my rom the following error:
-- Installing package ...
Finding update package...
Opening update package...
Verifying update package...
E: failed to verify whole-file signature
E:signature verification failed
Installation aborted.
Why do the rom manager want to install a package by making an backup?
PS: i have the rooted bootloader: PDA_XXJVK_Sbl.tar installed.
to revert back to you need to revert to a stock rom. using odin and a full PDA froyo will do the job.
Hey,
so u mean, i have to download the offical rom and install them over odin.
then i have to root them and install CWM and reverse the backup.
is that right?
ravn83 said:
Hey,
so u mean, i have to download the offical rom and install them over odin.
then i have to root them and install CWM and reverse the backup.
is that right?
Click to expand...
Click to collapse
yes.. that will be the proper way to do it.

4.2 Update Recovery Error - Unique Issue

I'm getting an error in recovery I've never seen before in my 3+ years with Android, rooting, etc. The error is this:
"assert failed: apply_patch_check("/system/vendor/lib/hw/power.grouper.so"
I get the error when I try to apply the 4.2 OTA .zip package in Clockworkmod Touch Recovery. I am on the newest (3.41) bootloader and obviously I have root. The system files all pass the check, but I'm getting this error and despite having Googled some answers, I've come up empty handed. Apart from flashing back to full stock, I am not sure what to do. Any thoughts from anyone?
JFMFT said:
I'm getting an error in recovery I've never seen before in my 3+ years with Android, rooting, etc. The error is this:
"assert failed: apply_patch_check("/system/vendor/lib/hw/power.grouper.so"
I get the error when I try to apply the 4.2 OTA .zip package in Clockworkmod Touch Recovery. I am on the newest (3.41) bootloader and obviously I have root. The system files all pass the check, but I'm getting this error and despite having Googled some answers, I've come up empty handed. Apart from flashing back to full stock, I am not sure what to do. Any thoughts from anyone?
Click to expand...
Click to collapse
dont know how to fix the error, but there is a newer bootloader version (4.13)
http://forum.xda-developers.com/showthread.php?t=1989319
Have you flashed a custom kernel? Some of the custom kernels also update that file so it is no longer stock, and hence it fails the assertion check on upgrade.
You can download the original stock 4.1.2 file here:
http://forum.xda-developers.com/showpost.php?p=34057950&postcount=221
:good:
Forgot to mention, you'll also need the stock 4.1.2 kernel installed if it isn't already, you can grab a copy here:
http://forum.xda-developers.com/showpost.php?p=33030559&postcount=4
Cheers,
Dave.
I have the same issue with assert failed: apply_patch_check("/system/vendor/lib/hw/power.grouper.so").
I have the stock kernel 4.1.2 and even installed 4.13 bootloader but this error is still there.
I'm under 4.1.2 stock, unlocked/rooted, that's all.
Any idea how to solve that ?

[Q] Need Help in installing Jelly Bean on Defy+

I want to install Jelly Bean on Motorola Defy+...
I had earlier installed it with this zip cm-10.2-20130917-NIGHTLY-mb526...
But since I tried to install kit kat on it which I m not able to....
So, I began from start
1. installed DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf than,
2. installed firmwaresbf to root it. Rooted Saw Superuser In Menu. Than,
3.insatlled CyanogenDefy Recovery v5.0.3.1-jordan recovery. than
4.Try to install cm-10.2-20130917-NIGHTLY-mb526. by going in custom recovery But now I got this Error
Installing Update...
E:Error in/sdcard/cm-10.2-20130917-NIGHTLY-mb526.zip
(Status 0)
Installation aborted.
5. Also want to install Team win recovery Project....
One More thing this is a same Zip from which I installed Jelly Bean on Defy+.... I haven't deleted it... so it Can't be corrupted I think so...
Please HELP.
Provide me your valuable assistance...
Tooooo many tutorials was posted on this subject. Is enough.
In the forum rules is stipulated that first search and if you NOT found anything then ask!
can u post a link of the forum that can explain.....
pgreed said:
Tooooo many tutorials was posted on this subject. Is enough.
In the forum rules is stipulated that first search and if you NOT found anything then ask!
Click to expand...
Click to collapse
can u post a link of the forum that can explain.....that will be very helpful
&
Thanks for Answering...
Pls Help....
it would've took you less time answering him than complaining.
Mate, I've had this very problem.
You need to flash an earlier version of cm. try cm10 or 10.1.
it doesnt work because you have an outdated recovery. flashing cm10 solves this.
Good luck!
edit: after you flash cm10 make sure to get the 20 oct version of cm10.2 as the 17 sept you tried to flash is not the latest
defynoob said:
it would've took you less time answering him than complaining.
Mate, I've had this very problem.
You need to flash an earlier version of cm. try cm10 or 10.1.
it doesnt work because you have an outdated recovery. flashing cm10 solves this.
Good luck!
edit: after you flash cm10 make sure to get the 20 oct version of cm10.2 as the 17 sept you tried to flash is not the latest
Click to expand...
Click to collapse
Not necessary. If you has follow my explanation (from other post) you've found that is another simplified method.
still Help Needed
pgreed said:
Not necessary. If you has follow my explanation (from other post) you've found that is another simplified method.
Click to expand...
Click to collapse
Try to install this with recovery but still getting same error cm-11-20131229-NIGHTLY-mb526.zip
E:Error in/sdcard/cm-10.2-20130917-NIGHTLY-mb526.zip
(Status 0)
Installation aborted.
Pls Help Me
no one there to HELP!
What happen is there no one who can provide any HELP to me...
As I want it much...
Pls Help Me...
thanks in advance..
I have the same problem now with my new Defy+.I had 2 Defys+ in past and just root and install 2init then instal .zip CM9 or CM10 and love it.Now I go to kill myself.From more than week I flash,install,reboot,reflash....and have no fully working Cm10.First I have no way to install newer than cm10.0!Any try with 10.1 or 10.2 is folow ERROR in the beginning and nothing more.My custom recovery now is CWM.Any try to update recovery or try with TWRP,or try dual recovery or,or...is going to boot loop or sot brick...Now Im on CM10/Android 4.1.2 and try to get telephony functions.Im in Bulgaria and before with previous Defys I use baseband switch to 342-145.Now just after install new ROM(CM10) telephony worked first couple of minutes,not more.After dialing it come to black screen or in normal incall screen but no voice from bot sides.I switch to other bands but nothing.It come to pissed me out.Please help
I go directly to CM11, it is much stable now.
Not able to install TWRP
Not able to install TWRP Tried by installing it from CyanogenDefy Recovery v5.0.3.1-jordan recovery and it says installed successfully from SD card but not able to boot in team win recovery project and therefore not able to install any CM version Yet
trying n getting nstalling Update...
E:Error in/sdcard/cm-10.2-20130917-NIGHTLY-mb526.zip or any other cm version
(Status 0)
Installation aborted.
Need help pls help me...:crying:

Categories

Resources