hello!
I have anew ZTE v9 light tap but i found that it isn't suppor arabic, so tried to install new android
and save old version as backup on sd card using clockworkmod recovery
now new android is not loading only animation image repeated
and Cann't access factory reset menu using Power + (-) i see clockworkmod screen and volume keyes is not working with it
what can i do??
thank you!
Click here to get to ZTE V9 Development
Hi,
it seems to be that your boot.img is faulty.
Put your device in bootloader (fastboot) mode.
Download the ROM which you wanted to install ,again and grab the boot.img and the recovery.img (if there is one)
Open ADB:
Type in: adb devices
adb reboot bootloader
fastboot flash boot.img
When it is complete , type this command in to flash recovery.img (if there is one)
fastboot flash recovery.img
Doesn't matter if your device don't start correctly , you will be able to get in recovery and flash the rom again.
Related
Hi there can anyone give me a step by step guide to installing the clockwork recovery mode so I can install a custom rom from zip please? This is for the LG GT540 thanks!!
here the rom with recovery
V20B - CIS from 20 of sept. (custom upgrated bootloader v0.8 - 210mb for fastboot upload)
http://istech.co.id/ronie/20B_CIS.zip
you need
V20B_00.kdz
from archive
enter fastboot - CAMERA+POWER
if you saw a black screen with no logos - you fastboot "
you need to write a command for upload recovery
fastboot flash recovery <recovery_name>.img
http://narod.ru/disk/26369218000/recovery_clockwork_2.5.0.5_swift.img.html
open recovery - HOME+POWER.
scrolling menu VOLUME UP/VOLUME DOWN, select item SEND CALL, return/cancel END OF CALL.
(copy-paste from other thread)
hani93 said:
here the rom with recovery
V20B - CIS from 20 of sept. (custom upgrated bootloader v0.8 - 210mb for fastboot upload)
http://istech.co.id/ronie/20B_CIS.zip
you need
V20B_00.kdz
from archive
enter fastboot - CAMERA+POWER
if you saw a black screen with no logos - you fastboot "
you need to write a command for upload recovery
fastboot flash recovery <recovery_name>.img
http://narod.ru/disk/26369218000/recovery_clockwork_2.5.0.5_swift.img.html
open recovery - HOME+POWER.
scrolling menu VOLUME UP/VOLUME DOWN, select item SEND CALL, return/cancel END OF CALL.
(copy-paste from other thread)
Click to expand...
Click to collapse
Ok so I flash the ROM using KDZ Updater = All well and good.
Now I follow your commands to enter this "fastboot business", I get the LG logo come up then it goes to a black screen... So I assumed it was in fastboot?? (not sure what fastboot is lol)
Then I got to windows command prompt I assume u mean? and type the command in pointing it to the android SDK tools folder?
Then I enter the command and it just stays on <Waiting for device> and thats as far as I get? hmm...
ALSO THE PHONE WAS PURCHASED FROM CARPHONE WAREHOUSE WHICH NO MATTER WHAT METHOD I TRY TO ROOT THE PHONE IT DOESNT HAVE IT! Dunno why??
Hi! if i already updated with Baltic V20D Official can i reflash with that one so that i can get Fastboot? ;o
hani93 said:
here the rom with recovery
V20B - CIS from 20 of sept. (custom upgrated bootloader v0.8 - 210mb for fastboot upload)
http://istech.co.id/ronie/20B_CIS.zip
you need
V20B_00.kdz
from archive
enter fastboot - CAMERA+POWER
if you saw a black screen with no logos - you fastboot "
you need to write a command for upload recovery
fastboot flash recovery <recovery_name>.img
http://narod.ru/disk/26369218000/recovery_clockwork_2.5.0.5_swift.img.html
open recovery - HOME+POWER.
scrolling menu VOLUME UP/VOLUME DOWN, select item SEND CALL, return/cancel END OF CALL.
(copy-paste from other thread)
Click to expand...
Click to collapse
Hi After updating .kdz using KDZ updater itreid to do fast boot (CAMERA+POWER)
it is not doing fast boot.. it is doing a normal boot
Nice tutorial for ROM update try it
h*tp://android.modaco.com/content/lg-gt540-optimus-gt540-modaco-com/323450/2-1-instructions-quarx-black-rom-full-insrtuctions-with-clockwork-recovery/
My steps.
Try wiping the phone before performing any rooting or flashing. z4Root Worked right out of the box for me. These were my steps:
Install z4Root
Perm Root
Powercycled
Downloaded SuperUser
Downloaded Terminal Emulator
Downloaded Rom Manager
Open SuperUser. ALLOW
Open Terminal Emulato. type SU. ALLOW
Open Rom Manager.
Flash ClockWork Recovery
Boot into Clockwork
Wipe phone.Wipe Dalvik.Wipe cache
Install rom.
Reboot.
Enjoy.
Please i need help c: i run 2.2.1 openswift and if i flash clockwork is my rom gone then?
i really don't want to flash with adb again The brick chance is to big :c
The answer is No, Because the recovery will be in different partition. so u will not loose your ROM if u flash with new recovery.img
Guys,how do I go from 2.2.1 to 2.1 I tried with kdz but I showed Arm 11 crash!!!!
Arm 11 crash
Last week i also got this error.. but don't worry
follow this u should be able to come out from this issue
1. Remove battery,SIM,Memory card from your phone
2. Connect you phone with your PC using USB cable
3. When its booting press Volume down and Power button until it shows download mode in the phone screen
4. Remove your USB cable from PC
5. Insert the battery
6. Now try to flash your phone using KDZ software update (use the ROM with fastboot)
if u don't hv ROM with fastboot download it from here http://www.mediafire.com/?4r5n1cj5v49151p
Always it is better to,
1. Unroot your phone before flashing with KDZ software ( i don't know why, but i got Arm 11 crash when i tried to flash with out unrooting)
2. Wait while updating if it stuck at call_fun upgrade or Change to Dload Mode
hope it helps
jealumalai111462 said:
Arm 11 crash
Last week i also got this error.. but don't worry
follow this u should be able to come out from this issue
1. Remove battery,SIM,Memory card from your phone
2. Connect you phone with your PC using USB cable
3. When its booting press Volume down and Power button until it shows download mode in the phone screen
4. Remove your USB cable from PC
5. Insert the battery
6. Now try to flash your phone using KDZ software update (use the ROM with fastboot)
if u don't hv ROM with fastboot download it from here http://www.mediafire.com/?4r5n1cj5v49151p
Always it is better to,
1. Unroot your phone before flashing with KDZ software ( i don't know why, but i got Arm 11 crash when i tried to flash with out unrooting)
2. Wait while updating if it stuck at call_fun upgrade or Change to Dload Mode
hope it helps
Click to expand...
Click to collapse
Thanks!!!but is this guide for official 2.1 ??
How to return to official 2.1 without clockwork recovery mode?Now I have cyanogenmod with clockwork.
jek20 said:
Thanks!!!but is this guide for official 2.1 ??
How to return to official 2.1 without clockwork recovery mode?Now I have cyanogenmod with clockwork.
Click to expand...
Click to collapse
1. Flash Quarx black 2.1 ROM in fastboot mode (ht*p://rghost.net/2898235)
2. Use KDZ software update and install official ROM
3. Download the required version of official rom from this site (http://android.modaco.com/content/l...daco-com/311477/lg-gt540-rom-updates-from-lg/)
Thanks!!!!!!!!!
Guys,my phone shows Arm 11 crashed again on 2.1 without fastboot.
I go to the download mode and on kdz updater load kdz file and type on EMERGENCY,DIAG,CS_EMERGENCY and its say THE PHONE NOT FOUND!!!
How to fix this??
I tried to put Europe Open+Fastboot rom and its say again THE PHONE NOT FOUND!!!
EDIT:I fix it
I can't do that it my Phone, my phone only vibrates whe i try to torn on.
This is a Guide About How to Install TWRP Recovery Touch on HTC Droid Incredible
You Need HTC Sync installed on your system & Bootloader Unlocked
well first we need the adb/fastboot link -----> http://adf .ly/aWF6t
Now put your Device on bootloader press volumen button + power button and connect it to your PC
1. extract adb.zip in the root folder (C:/adb/)
2. open the Command line or CMD as admin and type
cd /adb/
fastboot devices
Click to expand...
Click to collapse
3. now to continue, test fastboot or fastboot.exe
and others commands will be appear
4. and now type fastboot flash recovery twrp.img (in adb.zip have the CWM recovery 5.0.X and CWM 6.0.3.X and TWRP Recovery Touch)
5. and press enter and wait and the recovery will be flashed
Congratulations
Now you have the TWRP Recovery without problems
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
My Device
HTC Droid Increidble - S-ON / ByPassed Verizon Activation & Rooted
Bootloader/HBoot 1.07 ***UNLOCKED***
www.htcdev.com/bootloader/
Recovery: CWM Recovery 6.0.3.0
http://forum.xda-developers.com/showthread.php?t=2210009
Rom: Evervolv inc 4.0.0 Dives (Android 4.4.2)
http://forum.xda-developers.com/showthread.php?t=2046220
thanks so much bro..had my at&t evita stuck on white screen after flashing AOKP ROM.. It was partly bricked..Since I had made a system backup using twerp earlier before flashing another recovery file.. I used your guide...then my evita came back to life....Awesome...
Fastboot not working---FIX!!! (Htc desire 601)
This worked on my Htc desire 601 after my phone only booted into white screen stock recovery screen. (it would keep rebooting to fastboot screen only, not twrp screen.) using ADB/FASTBOOT TOOLS i had to use command prompt from TOOLS folder to make it work, or else i kept getting errors, could not load file etc. I also put recovery .img in every folder i was using the command prompt until i got it working.
Good luck!
Direct link: http://www.mediafire.com/download/4dzx66hv42avqbe/adb.zip
Don't support vermin like Adfly.
Ok, I've bricked my ZF 5 and have gone through many tuts to unbrick it but unfortunately I can't get into recovery mode. I can enter the droidboot mode by pressing Vol down + power button but when I click on Recovery there, it gets stuck at the boot screen mode(the one we see before entering into droidboot mode) and stays there forever. The adb shell does detect this and I did try to flash a recovery img through it but still no use. Can anyone get me out of this please?
Akhil916 said:
Ok, I've bricked my ZF 5 and have gone through many tuts to unbrick it but unfortunately I can't get into recovery mode. I can enter the droidboot mode by pressing Vol down + power button but when I click on Recovery there, it gets stuck at the boot screen mode(the one we see before entering into droidboot mode) and stays there forever. The adb shell does detect this and I did try to flash a recovery img through it but still no use. Can anyone get me out of this please?
Click to expand...
Click to collapse
download firmware from asus site, unzip them and you will see some folders and: recovery.img droidboot.img and boot.img
so, download and 1.0.32 and put recovery.img to folder with adb files.
boot Zf5 to fastboot/droidboot plug in computer ( you need asus drivers ) open cmd window in adb folder (SHIFT+ RIGHT CLICK) and then write : fastboot flash recovery recovery.img
press enter and wait, now try boot to recovery
you can try flash droidboot.img and boot.img too
kihope12 said:
download firmware from asus site, unzip them and you will see some folders and: recovery.img droidboot.img and boot.img
so, download and 1.0.32 and put recovery.img to folder with adb files.
boot Zf5 to fastboot/droidboot plug in computer ( you need asus drivers ) open cmd window in adb folder (SHIFT+ RIGHT CLICK) and then write : fastboot flash recovery recovery.img
press enter and wait, now try boot to recovery
you can try flash droidboot.img and boot.img too
Click to expand...
Click to collapse
Thanks for the reply but as I mentioned I've already tried this and I do get a FLASH Complete messages as well. However, when I click on recovery now, it gets stuck at boot screen.
kihope12 said:
download firmware from asus site, unzip them and you will see some folders and: recovery.img droidboot.img and boot.img
so, download and 1.0.32 and put recovery.img to folder with adb files.
boot Zf5 to fastboot/droidboot plug in computer ( you need asus drivers ) open cmd window in adb folder (SHIFT+ RIGHT CLICK) and then write : fastboot flash recovery recovery.img
press enter and wait, now try boot to recovery
you can try flash droidboot.img and boot.img too
Click to expand...
Click to collapse
btw I cant find droidboot.img file inside the firmware
Akhil916 said:
btw I cant find droidboot.img file inside the firmware
Click to expand...
Click to collapse
droidboot=fastboot
in 4.4 kitkat is fastboot
in 5.0 lollipop is droidboot, but it is same
try relock bootloader
in my experience if you have flashed all three droidboot, recovery and boot image. still cant entering recovery. it is hardware issue..
dont waste ur time,, go to nearest service center
hey guys i have the same issue with Asus Zenfone 6 (A601CG), i am able to go into fastboot but when ever i select recovery only "USB logo" is showing.....
iam having problem entering to recovery mode on after adb flash.i jst stucked with fastboot and on press recovery ,phone's displaying asus logo and stucks to proceed furthur.
pls help me as i tried the above mentioned method too.
SriChinnu said:
iam having problem entering to recovery mode on after adb flash.i jst stucked with fastboot and on press recovery ,phone's displaying asus logo and stucks to proceed furthur.
pls help me as i tried the above mentioned method too.
Click to expand...
Click to collapse
Do one thing when you get into fastboot and tap on recovery an asus logo is seen.
Then kindly hold your power button and then your device will switch-on to twrp easily.
The actual problem is because of your device unable to get into twrp automatically so herein the above method you are manually getting into device.
Regards
Janus
Hi I'm sorry if this is in the wrong place please direct me to where to go if it is.
My problem is I have a Huawei p8 with no os on it what so ever it has twrp and that's it. I have spent hours trying to read and find a working stock or even custom rom for the phone. The only ROM that seems to be able to be flashed is from fromFuture but when I flashed it through twrp it said success and then was still in boot loop. I really don't know what to do please help. Thank you
painterdannz said:
Hi I'm sorry if this is in the wrong place please direct me to where to go if it is.
My problem is I have a Huawei p8 with no os on it what so ever it has twrp and that's it. I have spent hours trying to read and find a working stock or even custom rom for the phone. The only ROM that seems to be able to be flashed is from fromFuture but when I flashed it through twrp it said success and then was still in boot loop. I really don't know what to do please help. Thank you
Click to expand...
Click to collapse
You need the masrhmallow bootloader for flash from furure ROM .
Forgive my English too, if I understood well the problem is you can not boot your operating system.Download the official rom and extract the boot and system images of the update.app.?*
Huawei update extractor?*http://forum.xda-developers.com/show...php?t=2433454.?*Once you have boot.img and recovery.img Download adb minimal and fastboot and universal drivers adb. In the folder where is adb minimal and fastboot copy boot.img and system.img.
Start the adb minimal, connect the USB cable to your computer, press volume down and connect the cable,or volumen down and power, so your phone will enter fastboot mode.
In the Command window of minimal adb type the following:?*
fastboot devices and pressing enter to ensure that recognizes your phone.?*
Fastboot flash boot boot.img and pressing enter.
Fastboot flash system system.img and pressing enter this takes more time.
For end ; fastboot reboot.
My TWRP recovery was erased when I back to official rom even I hadnt mark that option in twrp recovery. Now when I go till fastboot to instal TWRP I can only do 2 commands then it stops working , but I need 3 commands to instal the twrp. HOW do I FIX it? pleeeease
I have installed the right drivers and every step before it works completly fine.
The fastboot mode screen stay frozen then the phone turns off
Fastboot devices ok
Fastboot oem nubia_unlock NUBIA_Z17 NX563J ok
Fastboot flash recovery recovery.img not ok, just frozen screen then turns off
It has the last nubia official rom
Can I use the official local update app in manual update to flash recovery?
I need it so much to install gapps
Or do exist another whey to install gapps no Nubia Z17 without TWRP?
GuiMediller said:
My TWRP recovery was erased when I back to official rom even I hadnt mark that option in twrp recovery. Now when I go till fastboot to instal TWRP I can only do 2 commands then it stops working , but I need 3 commands to instal the twrp. HOW do I FIX it? pleeeease
I have installed the right drivers and every step before it works completly fine.
The fastboot mode screen stay frozen then the phone turns off
Fastboot devices ok
Fastboot oem nubia_unlock NUBIA_Z17 NX563J ok
Fastboot flash recovery recovery.img not ok, just frozen screen then turns off
It has the last nubia official rom
Can I use the official local update app in manual update to flash recovery?
I need it so much to install gapps
Or do exist another whey to install gapps no Nubia Z17 without TWRP?
Click to expand...
Click to collapse
To flash recovery download twrp 3.5,
Put it into minimal adb folder, copy its name run cmd with administrative rights withing minimal adb and use *fastboot flash recovery "copied name".img
My phone (Nubia z17) don't work. Only fastboot mode and recovery mode work. Please help me
Vi7eta said:
To flash recovery download twrp 3.5,
Put it into minimal adb folder, copy its name run cmd with administrative rights withing minimal adb and use *fastboot flash recovery "copied name".img
Click to expand...
Click to collapse
GuiMediller said:
My TWRP recovery was erased when I back to official rom even I hadnt mark that option in twrp recovery. Now when I go till fastboot to instal TWRP I can only do 2 commands then it stops working , but I need 3 commands to instal the twrp. HOW do I FIX it? pleeeease
I have installed the right drivers and every step before it works completly fine.
The fastboot mode screen stay frozen then the phone turns off
Fastboot devices ok
Fastboot oem nubia_unlock NUBIA_Z17 NX563J ok
Fastboot flash recovery recovery.img not ok, just frozen screen then turns off
It has the last nubia official rom
Can I use the official local update app in manual update to flash recovery?
I need it so much to install gapps
Or do exist another whey to install gapps no Nubia Z17 without TWRP?
Click to expand...
Click to collapse
give you a easy app for flash TWRP3.2.3,but is chinese.unzip the zip file。if phone is turn on.(Developer options should be turned on）type 2 and clik "ENTER".best is phone on BL（Turn off the phone, press and hold the volume - button and power button at the same time to enter BL mode.）.then type 3 and clik "ENTER".when you see "OK",then Use the volume keys to select recovery mode, then press the power key.
I have tried and I make mistakes. ''waiting for any device''