Hello
In my YUREKA, the main microphone has crap quality. Is this just me or all Yureka's have a crappy microphone?
I shifted from Moto E to Yureka. While sending Voice Notes in whatsapp using the Moto E the sound was crystal clear, but in Yureka, its is full of noise and distortion. Is there any solution? Or a hardware issue?
Kindly reply.
Yeah, MMX Microphones are real Crap! Even the Unite 2's got same crappy microphone...
slow mic
Mic recordings ia very low. And when we recorded sound volume is low.do ayone face same issue
Yes very pathetic microphone.
Sent from my AO5510 using XDA Free mobile app
Try using earphone mic...
ujilraj said:
Try using earphone mic...
Click to expand...
Click to collapse
Can you keep ear phone all the time? If you have any suggestion please share
Sent from my AO5510 using xda Forum
buy a 3.5mm stereo mic. The quality may increase better. No other solution...
I find a solution for Yureka's microphone(Cm 12.02) at last. (when calling I hear clear sound but other end hear my sound very low and distracted )
1. You use sound recorder to recorder something if sound is clear.
2. Use camera to record some video and check the sound quality if sound is not clear. some background sound is added.
3. download and install " ROOT CHECKER BASIC & ES FILE EXPLORER"
4. Open Root checker & VERIFY ROOT after proper installation.
5. Open ES file explorer, keep Root explorer ON.
6. Edit "mixer_paths.xml" (/system.etc/mixer_paths.xml) <ctl name="ADC1 Volume" value="0"/> in place of <ctl name="ADC1 Volume" value="0"/>
<ctl name="ADC2 Volume" value="0"/> in place of <ctl name="ADC2 Volume" value="0"/>
<ctl name="ADC3 Volume" value="0"/> in place of <ctl name="ADC3 Volume" value="0"/>
after saving reboot your set and enjoy.
if any problem contact with me.
Sukanta Bhattacharjee ([email protected])
Thank You
Sukanta Bhattacharjee
sukant
Wats different in the two values.... U written code's Both values are same..i..e '0'...then wars use...
I have a microphone problem. While calling I can hear the voice at the other end. But my voice is not at all audible to them . in fact there's no voice. Please help
i have d same problem i did dose value changing thing ma fone is rooted too... but not solving.. pls help
i checked the mic by recording a video.. It's working but when i recorded using sound recorder it was not recording anything
Hey XDA Developers,
I am a huge fan of all your work and follow all your stuff since I got my Neo V in 2011. Now I upgraded to a Z3 and reeeally love it .
Like always with all the Handsets and Ipods, the headphone output is not as loud as you want it, so I was looking for some tweaks to find here and there and was able to get some stuff in the post with the Audio Mod zohaib0001 thanks for that.
But if you dont want to flash a whole mod and just want to increase the output a little bit you can edit the mixer_paths.xml in the etc folder on 5.1.1 or in etc\media on 4.4.4.
First of all, you need Root on your phone and enable R\W on the Device. Second, BACKUP the mixer_paths.xml to somewhere else. If you change a bit more that wanted, just copy it back and be happy to be back again with the normal setings.
If you open it in any Root Explorer you have, go till the lines:
<path name="sidetone-headphones"> a bit over the middle of the whole code.
In the following lines you can see some clt values, all the values with 38, 82, 77... will increase or decrease the output. You just need to set it a little higher for a result, for example +5 on everything, so play a bit with it and you will find out. I changed it till the USB Headphones setting came up, if you use one of these, maybe if will affect too. After you done it, chech if the permision is still set to rw-r--r-- and restart your Phone
Here is my configurated file for litte louder Headphones on 5.1.1. I dont know if it works on 4.4.4, you can test it and tell me. If it wont work, an alert will come up, that the audio stoped working, like on my, when I forgot so set the right permissions.
http://www.mediafire.com/download/f0o9teky5yw10ax/mixer_paths.xml
Its my first post, so be kind and if I can do something better just write it here . And also, I hope my english is good enought to understand everything. Just some thanks will make me happy
Cheers Kamyhra
Then you know me also from the old Neo V days ^^
I jumped from Neo V to Xperia P and From Xperia P to Xperia Z and from Xperia Z to Z2 and now Z3 ^^
“Sent From MWE V8.0.0 On My Z3”
do you know which ones are just for the speakers?
Cow07 said:
do you know which ones are just for the speakers?
Click to expand...
Click to collapse
+1
Sent from my D6603 using Tapatalk
Kamyhra said:
Hey XDA Developers,
I am a huge fan of all your work and follow all your stuff since I got my Neo V in 2011. Now I upgraded to a Z3 and reeeally love it .
Like always with all the Handsets and Ipods, the headphone output is not as loud as you want it, so I was looking for some tweaks to find here and there and was able to get some stuff in the post with the Audio Mod zohaib0001 thanks for that.
But if you dont want to flash a whole mod and just want to increase the output a little bit you can edit the mixer_paths.xml in the etc folder on 5.1.1 or in etc\media on 4.4.4.
First of all, you need Root on your phone and enable R\W on the Device. Second, BACKUP the mixer_paths.xml to somewhere else. If you change a bit more that wanted, just copy it back and be happy to be back again with the normal setings.
If you open it in any Root Explorer you have, go till the lines:
<path name="sidetone-headphones"> a bit over the middle of the whole code.
In the following lines you can see some clt values, all the values with 38, 82, 77... will increase or decrease the output. You just need to set it a little higher for a result, for example +5 on everything, so play a bit with it and you will find out. I changed it till the USB Headphones setting came up, if you use one of these, maybe if will affect too. After you done it, chech if the permision is still set to rw-r--r-- and restart your Phone
Here is my configurated file for litte louder Headphones on 5.1.1. I dont know if it works on 4.4.4, you can test it and tell me. If it wont work, an alert will come up, that the audio stoped working, like on my, when I forgot so set the right permissions.
http://www.mediafire.com/download/f0o9teky5yw10ax/mixer_paths.xml
Its my first post, so be kind and if I can do something better just write it here . And also, I hope my english is good enought to understand everything. Just some thanks will make me happy
Cheers Kamyhra
Click to expand...
Click to collapse
Thanks a ton buddy.
I just bought the sony MDR V6 headphones but due to its higher impedance it wasn't loud enough at max volume on my z3.
I was searching everywhere on how to increase the headphone outputs and you saved me on the first day!
Hey guys,
sorry for the late response I will check today what is for the headphone and what is for the speaker only.
Utsav911 you are welcome, thats what i am here to help a bit with my little knowlagde.
Cheers
hello
i follow this instruction but there isnt any change in vol headphone.
plz tell us which lines and numbers we must edit for boost headphone exactly? plz take screenshots and share .
Sent from my iPhone using Tapatalk
bradgh said:
hello
i follow this instruction but there isnt any change in vol headphone.
plz tell us which lines and numbers we must edit for boost headphone exactly? plz take screenshots and share .
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
who is know?
Sent from my iPhone using Tapatalk
bradgh said:
who is know?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
try replacing the file with the one in OP. I edited the file myself as stated in the first post and it worked.
Are you on android 5.1.1?
utsav911 said:
try replacing the file with the one in OP. I edited the file myself as stated in the first post and it worked.
Are you on android 5.1.1?
Click to expand...
Click to collapse
yes im on 5.1.1, i need more headphone vol and i want know which line.
Sent from my iPhone using Tapatalk
what about increase sound of earpiece call volume ? i mean when iam on a call i can hardly hear the other person calling.. i am on 5.1 moonwalker 6653 model..pls pls help ..this is driving me nuts
I've compared the stock one vs the version from OP, and boosted pretty much everything a bit more, I believe headphones are now a fair bit louder, yet to test the rest!
I believe this is the aux port for media:
<path name="sidetone-headphones">
<path name="sidetone-iir" />
<!-- 45 % of 124 (range 0 - 124) Register: 0x340 -->
<ctl name="IIR1 INP1 Volume" value="45" /> (originally 37) (r1983)
And:
<path name="headphones-regulation"> ( from R2233), the RX1 and RX2 values, I changed them to 86 from 76.
then R2349:
path name="speaker-and-headphones">
<path name="speaker" />
<path name="headphones" />
<ctl name="RX1 Digital Volume" value="80" />
<ctl name="RX2 Digital Volume" value="80" />
</path>
(was 70)
<path name="speaker-and-anc-headphones">
Then: R2513 and R2515:
<ctl name="RX1 Digital Volume" value="96" />
<!--68 % of 124 (rounded) register: 0x2BF-->
<ctl name="RX2 Digital Volume" value="96" />
Phone calls have their own ''volume'' settings, I didn't touch those and left the values from OP (so slightly boosted from stock).
Needs a phone restart too!
EDIT:
Tested a bit more on some songs that were way to silent before, and I certainly got a significant boost.
Does anyone know what the max values are? 100 ?
I wish to boost the 3.5mm jack port even more, can regulate the volume with the button anyhow (to get it lower if needed), so I want my XML file with the media settings on max, at least for the 3.5mm port.
I gave it a try, but no differences in the volume with headphones, just a little bit with clearaudio+ disabled, but not much
thesplitter said:
I gave it a try, but no differences in the volume with headphones, just a little bit with clearaudio+ disabled, but not much
Click to expand...
Click to collapse
Afaik you need that disabled anyhow as that reduces your volume, I certainly got a noticeable change with my values.
Did you reboot the phone ?
Clear cache and try again.
Enviado desde mi D6603 mediante Tapatalk
Hello Sir, thanks for the tutorial as I were able to boost my headphone volume to my liking. But, what is the settings to tweak for a louder in-call volume please?
snovvdog said:
I've compared the stock one vs the version from OP, and boosted pretty much everything a bit more, I believe headphones are now a fair bit louder, yet to test the rest!
I believe this is the aux port for media:
<path name="sidetone-headphones">
<path name="sidetone-iir" />
<!-- 45 % of 124 (range 0 - 124) Register: 0x340 -->
<ctl name="IIR1 INP1 Volume" value="45" /> (originally 37) (r1983)
And:
<path name="headphones-regulation"> ( from R2233), the RX1 and RX2 values, I changed them to 86 from 76.
then R2349:
path name="speaker-and-headphones">
<path name="speaker" />
<path name="headphones" />
<ctl name="RX1 Digital Volume" value="80" />
<ctl name="RX2 Digital Volume" value="80" />
</path>
(was 70)
<path name="speaker-and-anc-headphones">
Then: R2513 and R2515:
<ctl name="RX1 Digital Volume" value="96" />
<!--68 % of 124 (rounded) register: 0x2BF-->
<ctl name="RX2 Digital Volume" value="96" />
Phone calls have their own ''volume'' settings, I didn't touch those and left the values from OP (so slightly boosted from stock).
Needs a phone restart too!
EDIT:
Tested a bit more on some songs that were way to silent before, and I certainly got a significant boost.
Does anyone know what the max values are? 100 ?
I wish to boost the 3.5mm jack port even more, can regulate the volume with the button anyhow (to get it lower if needed), so I want my XML file with the media settings on max, at least for the 3.5mm port.
Click to expand...
Click to collapse
Hey, did you try increasing the loudspeaker volume?
Plz help me
guys i tried to change the values.. i made a back up of that file too.. but all of a sudden my sound just went off.. then what i did was that i delete the file and replaced the original one.. but still i dont have sound.. i tried to wipe delvick cache and the cache .. yet i dont have sound. plz help me :/
sylaw said:
guys i tried to change the values.. i made a back up of that file too.. but all of a sudden my sound just went off.. then what i did was that i delete the file and replaced the original one.. but still i dont have sound.. i tried to wipe delvick cache and the cache .. yet i dont have sound. plz help me :/
Click to expand...
Click to collapse
ookay i managed to restore my backup and then tweak the settings again... Thank you for your step by step guide @snovvdog
Did anyone successfully test this in MM .291? Would this interfere with Viper4X configuration?
Listening to music on my Redmi Note 3 Pro (Kenzo), I noticed a loud crackling static noise when I use my headphones on CM13 and related ROMs like Resurrection Remix. It's especially noticeable when a song starts to play. I didn't get this on MIUI 8.
To fix it, edit the following file: /system/etc/mixer_paths_wcd9326.xml. Please make a backup first.
Change these lines:
<ctl name="HPHL Volume" value="20" />
<ctl name="HPHR Volume" value="20" />
To this:
<ctl name="HPHL Volume" value="3" />
<ctl name="HPHR Volume" value="3" />
Delete these following lines:
<ctl name="COMP1 Switch" value="1" />
<ctl name="COMP2 Switch" value="1" />
<ctl name="COMP7 Switch" value="1" />
<ctl name="COMP8 Switch" value="1" />
Save the file and reboot. You'll need to increase headphone volume a lot more to match the same level as before but you'll get crystal clear sound. I'm using old Xiaomi Pistons and music sounds amazing now even using the basic CM AudioFX app.
There's a simpler fix. Open the same file (/etc/mixer_paths_wcd9326.xml and go to line 111. You'll see:
<ctl name="RX HPH Mode" value="CLS_H_HIFI" />
Replace CLS_H_HIFI with CLS_H_LP
Save, reboot and you're good.
Plus there doesn't seem to be a volume issue with this fix.
I tried that before and it didn't fix the issue. I could still hear hissing when using Xiaomi pistons. Maybe it's a problem with the amp gain set too high, you end up getting a lot of noise when nothing's playing.
oatcooky said:
I tried that before and it didn't fix the issue. I could still hear hissing when using Xiaomi pistons. Maybe it's a problem with the amp gain set too high, you end up getting a lot of noise when nothing's playing.
Click to expand...
Click to collapse
Weird, I have a set of Piston 3's and it fixed it for me.
Hi guys, I have cracking noise via Bluetooth when in the car making a phone call, is it a separate fix?
didnt work for me
still have this noise
You might want to try this too.
gman88667733 said:
... In a kernel editor app or the one provided with the kernel, go into sound settings and reduce the gain level of the headphones from the stock level of around 20 to -20, this will reduce the maximum volume a bit, but it gets rid of 100% of the white noise....
Click to expand...
Click to collapse
A reddit post (can't find it right now) suggested that -12db is the optimal value.
Good luck
I do not find the line ''<ctl name="RX HPH Mode" value="CLS_H_HIFI" />'' with miui9 on android 6 for the Kate
I tried the tips in the OP but this fails too.
I already changed the speaker materially.
---------- Post added at 04:52 PM ---------- Previous post was at 04:36 PM ----------
what kernel app can change the settings about the sound ?
Hello everyone!
Please tell me how you can reduce the volume of the earpiece when talking on the phone?
the fact is that even at the set minimum volume, the sound is very loud, the people around him hear everything that the interlocutor is talking about. the phone has root-rights, maybe somewhere in some system files it can be corrected?
I've never had this before.
Are you sure that the speaker isn't in use??
Lowest volume is barely audible.
in xiaomi phones, everything is quite simple - just edit the mixer_paths_tesha file YOURSELF
and change 2 values there
<ctl name = "HPHL Volume" value = "11" />
<ctl name = "HPHR Volume" value = "11" />
why this cannot be done in oneplus phones, I do not understand at all. very poor technical support, unfortunately. you cannot even name which file me need to edit and which values to change there.