Related
Is it just me or is the foxhound rom thread for i9505 gone
Sent from my GT-I9505 using Tapatalk 4 Beta
From what I can see Raf has stopped the ROM due to negative remarks towards his work. Personally im gutted, some people have a problem with it coming with jkay as standard even tho raf included the jkay restore zip in his OTA. I just restore my framework with that then installed 3minit. Easy, there was no need for the negativity
Sent from my GT-I9505 using xda premium
gavin-phelan said:
Is it just me or is the foxhound rom thread for i9505 gone
Sent from my GT-I9505 using Tapatalk 4 Beta
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2303239&page=214
sandman_06 said:
http://forum.xda-developers.com/showthread.php?t=2303239&page=214
Click to expand...
Click to collapse
Unfortunately the ROM download link is missing.
Hello all
It's for anyone who has a problem with offline charging.
I just tested make a fix for offline charging problem
After over than 5 month finnaly i can see it again.
it works perfectly on my rom (MIUI).
so can you guys tested it to another rom? is it works? especially for all AOSP based ROM
give me your results just posted it below with rom you're using.
Instructions :
Just flash file attachment below via CWM. (If you're using STOCK based rom used another one for stock based)
power off your devices.
and plug a charger
if this works
you'll see the legendary charging animation lol
LIST Working ROM :
MIUI
Mahdi ROM
STOCK ROM
eXzistence ROM
VanirAOSP
CM11
CREDITS
Sony
@DooMLoRD for leaked JB4.3
This is working on mahdi rom.
Great job!
Sent from my C5303 using xda app-developers app
Will it works at CM11 or stock ROM?
Sent from my C5303 using XDA Premium 4 mobile app
I'm on stock and working for me
Thanks!!!
Sent from my C5303 using Tapatalk 2
Works pretty fine. I'm on Stock...
Sent from my C5303 using xda app-developers app
It's work for me :good:
stock rom
I wait for fix offline changer long time untill sony will release 4.3 :laugh:
Hahaha
Working
Thanks man it's working in Vanir rom :victory:
Like everybody else just confirming it works on stock/eXsitenze rom
Sent from my C5303 using Tapatalk
works on locked bootloader and stock rom
Great Job a super solution
it's work for me dude thanks :victory:
Works on MAHDI rom!
Works on cm11
Sent from my C5303 using XDA Premium 4 mobile app
Good it worked on many roms.
By the way for STOCK rom, can you guys tell the firmware number too, to make it more specific?
UPDATED OP with list of worked ROM
Sent from my C5303 using Tapatalk
imanesaurus said:
Good it worked on many roms.
By the way for STOCK rom, can you guys tell the firmware number too, to make it more specific?
UPDATED OP with list of worked ROM
Sent from my C5303 using Tapatalk
Click to expand...
Click to collapse
Worked on Stock. 254 firmware and
Xperia Pureness v1.0 custom rom
Sent from my C5302 using Tapatalk
thaks lot work well
Works here on existenz rom, finally I can charge the phone in off mode. Great job :good: :good:
Just found something, I cant go into CWM anymore after flash this fix. Then I try to reflash CWM, can into CWM but the offline fix is not working. Is there anyone have the some problem with me?
Sorry for my bad english... Thanks for the fix.
Beartd said:
Works here on existenz rom, finally I can charge the phone in off mode. Great job :good: :good:
Just found something, I cant go into CWM anymore after flash this fix. Then I try to reflash CWM, can into CWM but the offline fix is not working. Is there anyone have the some problem with me?
Sorry for my bad english... Thanks for the fix.
Click to expand...
Click to collapse
Unfortunately it didn't happen to me.
Because in MIUI it works fine.
Can you confirmed to me, before you flash this fix, your rom have 'chargemon' file in system/bin or not?
imanesaurus said:
Unfortunately it didn't happen to me.
Because in MIUI it works fine.
Can you confirmed to me, before you flash this fix, your rom have 'chargemon' file in system/bin or not?
Click to expand...
Click to collapse
I forget actually but I think there is chargemon file in system/bin because I have try "Sam" previous fix (some months ago) before.
It Worked on Leaked 4.3 version (12.1.A.0.256)
Works on CM10.2 FXP302.
Thanks!
Anyone actually been able to install the Google Dialer (Kitkat) on their note 3?
I've tried the apk in system/priv-app and set permissions to 644 but it only forcecloses on me..
If I install the app it works but understandably I cannot make calls.
Sent from my SM-N9005 using Tapatalk
http://forum.xda-developers.com/showthread.php?t=2397942
If you scroll further down in the OP you can find a Google Dialer addon module...
mani1999 said:
http://forum.xda-developers.com/showthread.php?t=2397942
If you scroll further down in the OP you can find a Google Dialer addon module...
Click to expand...
Click to collapse
Hi and thanks for your answer. The package it's self is alright, I've tried quite a few. May I ask if you are running the dialer your self from this package on your note 3 with 4.4 Tw rom?
Sent from my SM-N9005 using Tapatalk
Hi, I didn't try to install this package, but it looks like another directory tree (priv-app), May be aosp only.
I want to have KitKat dialer too
Sent from my SM-N900 using xda app-developers app
flashka07 said:
Hi, I didn't try to install this package, but it looks like another directory tree (priv-app), May be aosp only.
I want to have KitKat dialer too
Sent from my SM-N900 using xda app-developers app
Click to expand...
Click to collapse
Me too, so tired of the Samsung one and all the other 3rd party dialers. Android police do have an article describing that it should work on most phones by pushing to priv-app and setting permissions, but no luck here. I'm getting it to work by installing normally but no calls then.. And no point..
Sent from my SM-N9005 using Tapatalk
reidar.ostrem said:
Hi and thanks for your answer. The package it's self is alright, I've tried quite a few. May I ask if you are running the dialer your self from this package on your note 3 with 4.4 Tw rom?
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Nope I am using it on Temasek V36 (CM11 based rom) and it is working like charm. You just need to be carefull that you don't flash it on a clean install because than it gives you fcs...
mani1999 said:
Nope I am using it on Temasek V36 (CM11 based rom) and it is working like charm. You just need to be carefull that you don't flash it on a clean install because than it gives you fcs...
Click to expand...
Click to collapse
Ah, ok. Probably works better there yes due to aosp framework. Hope someone has a solution for a tw rom. I can't use cm until it's completely stable, but using most of the stock gapps besides the dialer.. (for now ?)
Sent from my SM-N9005 using Tapatalk
Oh, I use temasek's builds on my i9300 and nexus 7, but cannot use it on my note 3, because there is no support SM-N900 by CyanogenMod. It's so sad.
Sent from my SM-N900 using xda app-developers app
reidar.ostrem said:
Ah, ok. Probably works better there yes due to aosp framework. Hope someone has a solution for a tw rom. I can't use cm until it's completely stable, but using most of the stock gapps besides the dialer.. (for now ?)
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Well, actually it is already almost perfect. The only bug I could find is that sound sometimes gets distorted if you have touch sound enabled. And through Temaseks great work on his rom and kernel, battery life is not anymore a problem...
note 3
Lol I had this on my stock non rooted note 3 in no time I'm 11 yrs old i can make calls too
tjwoof said:
Lol I had this on my stock non rooted note 3 in no time I'm 11 yrs old i can make calls too
Click to expand...
Click to collapse
Can you share how you got it to work?
Same here, can someon post info how to enable gdialer on note 3?
I installed cm11 last build for jflte and mokee(KK4.4.4) and both of them has the same issue!
The problem is that the compass apps doesn't know where is the north even after I did a calibration?
Anyone experienced this issue?
Help ,please!
Download GPS Toolbox from the Play Store and calibrate from that app. Should be good afterwards.
Sent from my SPH-L720 using Tapatalk
troyboytn said:
Download GPS Toolbox from the Play Store and calibrate from that app. Should be good afterwards.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
No luck, It does not work!
Sorry that didn't work for you. If the compass worked with the stock rom, then the issue almost certainly lies within the kernel of the roms you are trying
Sent from my SPH-L720 using Tapatalk
troyboytn said:
Sorry that didn't work for you. If the compass worked with the stock rom, then the issue almost certainly lies within the kernel of the roms you are trying
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Thank you,
Yes, it works fine with the stock 4.4.2 TW rom but it doesn't work with any other cm11 based roms!.
Thanks in advance. [emoji8]
Sent from my SM-N920C using Tapatalk
I'm running Sixperience, it is a Note 5 mode but it's been awesome so far
Sent from my SM-N920C using Tapatalk
erobot ROM
Hy,
I've been using erobot ROM for about a month and for me it is perfect.
Battery friendly, no bugs and very good speed. I recommend version 11.2 as i encountered some problems with v 12.
Best regards!
I've used all available here at XDA, like most of erobot. I am now using V13.2 being the best release yet of rom erobot!
khimkitty18 said:
Thanks in advance. [emoji8]
Sent from my SM-N920C using Tapatalk
Click to expand...
Click to collapse
Do you like to venture to the dark side, dangerous and shaky world of custom ROM?
Come.....to the testing ground of CM 13, a custom ROM made using the latest mythical Android M.... Don't forget to make backup of your existing system using TWRP/CWM Backup feature, just in case you wish to go back the land of Stock or Touchwiz....
See you on the dark side.....
Wherw can we find cm13 for 910c?
Sent from my SM-N920C using Tapatalk
pir0maen said:
Wherw can we find cm13 for 910c?
Sent from my SM-N920C using Tapatalk
Click to expand...
Click to collapse
CM 13 Discussion in general or CM 13 in original development. I strongly suggest, you read and take careful steps before trying anything. Most important, always make backup of your current system using TWRP backup feature before installing.
READING IS SUGGESTED BUT BACKUP IS MANDATORY.
Sent from my SM-N910H using Tapatalk
jcvivo25 said:
I've used all available here at XDA, like most of erobot. I am now using V13.2 being the best release yet of rom erobot!
Click to expand...
Click to collapse
Yep just updated to 13.2. Thank you jcvivo25.[emoji12]
Sent from my SM-N920C using Tapatalk
Ditto v0.5 + Ultimate Kernel v.62 = pure awesomeness
Although there are some minor bugs i've found, like camera luminocity and TW settings fc.
pir0maen said:
Yep just updated to 13.2. Thank you jcvivo25.[emoji12]
Sent from my SM-N920C using Tapatalk
Click to expand...
Click to collapse
Hy, I'm experiencing screen freezing if I open Peel Smart Remote. Only solution is to extract battery and restart.
Same was with v12
Sectoras said:
Ditto v0.5 + Ultimate Kernel v.62 = pure awesomeness
Although there are some minor bugs i've found, like camera luminocity and TW settings fc.
Click to expand...
Click to collapse
Sent from my SM-N920C using Tapatalk
If someone need the latest and most stable, smoothest custom rom. I recommend v12.04 with SpaceX kernel. This is the best I've ever known. But i prefer Note5 UI, so that I come with V13.2. It's stable at the moment but sometimes phone gets hot and I have to restart phone to stop heating
Sent from my SM-N920C using Tapatalk
Thanks guys.. ?
Sent from my D2502 using Tapatalk
jcvivo25 said:
I've used all available here at XDA, like most of erobot. I am now using V13.2 being the best release yet of rom erobot!
Click to expand...
Click to collapse
pir0maen said:
Hy,
I've been using erobot ROM for about a month and for me it is perfect.
Battery friendly, no bugs and very good speed. I recommend version 11.2 as i encountered some problems with v 12.
Best regards!
Click to expand...
Click to collapse
vodanhdaisu said:
If someone need the latest and most stable, smoothest custom rom. I recommend v12.04 with SpaceX kernel. This is the best I've ever known. But i prefer Note5 UI, so that I come with V13.2. It's stable at the moment but sometimes phone gets hot and I have to restart phone to stop heating
Sent from my SM-N920C using Tapatalk
Click to expand...
Click to collapse
If Note 5 Port, eRobot v13.2 + Talexop Kernel and if Note 4 Stock, eRobot v12.04.
No FC, No Freeze , No Lags and No Bugs.
@erobot is the Best for N910C.
safzath said:
If Note 5 Port, eRobot v13.2 + Talexop Kernel and if Note 4 Stock, eRobot v12.04.
No FC, No Freeze , No Lags and No Bugs.
@erobot is the Best for N910C.
Click to expand...
Click to collapse
I found one bug. If I click on Peel Smart Remote small launcher, the entire screen freezes and only way to solve is to remove battery.
Sent from my SM-N920C using Tapatalk
pir0maen said:
I found one bug. If I click on Peel Smart Remote small launcher, the entire screen freezes and only way to solve is to remove battery.
Sent from my SM-N920C using Tapatalk
Click to expand...
Click to collapse
Do full wipe twice in TWRP and super full wipe in Aroma.
Then install the ROM.
safzath said:
If Note 5 Port, eRobot v13.2 + Talexop Kernel and if Note 4 Stock, eRobot v12.04.
No FC, No Freeze , No Lags and No Bugs.
@erobot is the Best for N910C.
Click to expand...
Click to collapse
I have ever tried v13.2 with taxelop. The phone run well for few hours then get lag and hot. So that i had to change UK. But phone got hot after a week. I switched to SpaceX yesterday
Sent from my SM-N920C using Tapatalk
vodanhdaisu said:
I have ever tried v13.2 with taxelop. The phone run well for few hours then get lag and hot. So that i had to change UK. But phone got hot after a week. I switched to SpaceX yesterday
Sent from my SM-N920C using Tapatalk
Click to expand...
Click to collapse
When you install a Kernel with proper method. It will take time to get stable. 3 days approx.
safzath said:
When you install a Kernel with proper method. It will take time to get stable. 3 days approx.
Click to expand...
Click to collapse
How would you go about doing that?
Sent from my SM-N910V using Tapatalk
Zwhlol-Zniper said:
How would you go about doing that?
Sent from my SM-N910V using Tapatalk
Click to expand...
Click to collapse
Wipe Dalvik Cache in TWRP, then flash the Kernel.
After flashing, Wipe Dalvik Cache again.
Then ReBoot to System.
And use your phone as usual for min. 2days.
Then you can feel and realise the performance. [emoji106]
safzath said:
Wipe Dalvik Cache in TWRP, then flash the Kernel.
After flashing, Wipe Dalvik Cache again.
Then ReBoot to System.
And use your phone as usual for min. 2days.
Then you can feel and realise the performance. [emoji106]
Click to expand...
Click to collapse
As soon as my new 910c comes in, I'll try it out.
Sent from my SM-N910V using Tapatalk