Related
Anyway to Flash Creeds 3.5 rom with Repencis Latest Kernel??
I know Repencis Kernel Rocks and i want it with Creeds v3.5 Custom Rom.Is there any way to do this without getting bootloops or further trouble??
If there is no way,then can anone suggest a good kernel which will make my Y awesome with creeds 3.5.I used to have Rom and kernel of Repencis.But now i am wondering if it is possible.any Opinions??
Currently I am on Repencis v3.5 rom with Its kernel.
Greenday50 said:
Anyway to Flash Creeds 3.5 rom with Repencis Latest Kernel??
I know Repencis Kernel Rocks and i want it with Creeds v3.5 Custom Rom.Is there any way to do this without getting bootloops or further trouble??
If there is no way,then can anone suggest a good kernel which will make my Y awesome with creeds 3.5.I used to have Rom and kernel of Repencis.But now i am wondering if it is possible.any Opinions??
Currently I am on Repencis v3.5 rom with Its kernel.
Click to expand...
Click to collapse
Flash backup before you try rom, if the restore bootloops : Cười:
do anyone know which kernels can run CM7?
Thanks!
White xp's Kernel
Hells Fusion Kernel....
Those are the only ones i know..
Merruk pre 2.0
Merruk 2.5
Savies rev 60
Sent from my Galaxy Y - A phone with Small Screen and Big Buttons
If you want the bootanimation, wifi, and etc on cm7 then use whitexp v1.0.1 kernel (latest).
Sent from my GT-S5360
just use white kernel 1.0.1 as he specially made it for cm7
Hello Mr. Repencis, and congratulations for your work.
I used Repencis V3 pro rom for more than a year, and i was always satisfied. I chose it because it was the one that took up less ram than any other I've tried and also because it had amazing graphics and cool features (eg a2sd support).
I recently installed version 3.5 found on another website, because here all the links are broken and I was surprised by the amazing graphics and low memory usage.
The new kernel also supports scaling of the CPU, but is not really complete regarding available frequencies and governor.
So i'd like to install kernel 7 final or at least 6.3 because most complete functions and scaling governor available, but absolutely does not want to work.
I tried to install it on your rom and also in other roms (jellyblast and hyperion) but i had no success (bootloop or locked at samsung screen).
However I successfully tested kernel USSR (also supports a2sd) and also Savie kernel (fabulous for the cpu, but no a2sd support). Both works in repencis 3.5 rom and on Hyperion 8.
Now.. Can you give me a hand on how to install your kernel and, above all, can you give me a link that is safe? Your kernel has the perfect features that I want, but it seems i was completely unable to make it working.
I also tried the version 6.3 of the kernel without success.
I came to see the boot image and then reboot loop.
Thanks and goodbye.
Yes it is
Want To Ask Question? Ask Here
Thanks,
TechnoSavie
Repencis hasn't been round here since about half way through last year
Try hells fusion #50 - its the latest stable kernel around here
Thank you
This day i have installed merruk kernel, but it seems i have some problems because my phone shutdown.
Now i want to correct max frequancies but supersu doesn't work anymore. It seems a well known problem with merruk kernel.
I installed superuser and removed supersu and it seems ok!
I was interested in repencis kernel because i like to use as2d and i have only found Repencis and ussr kernel support a2sd.
But then i understood that a2sd have a problem preventing deep sleep mode. So maybe i need to convinc myself to use link2sd.
P.S. What do you think about savie kernel? Don't you think is better than hells?
PPS where can i find latest hells kernel?
Really really thanks and goodbye!
sercik said:
This day i have installed merruk kernel, but it seems i have some problems because my phone shutdown.
Now i want to correct max frequancies but supersu doesn't work anymore. It seems a well known problem with merruk kernel.
I installed superuser and removed supersu and it seems ok!
I was interested in repencis kernel because i like to use as2d and i have only found Repencis and ussr kernel support a2sd.
But then i understood that a2sd have a problem preventing deep sleep mode. So maybe i need to convinc myself to use link2sd.
P.S. What do you think about savie kernel? Don't you think is better than hells?
PPS where can i find latest hells kernel?
Really really thanks and goodbye!
Click to expand...
Click to collapse
Both Davies and hells are quite complete and stable. Hells kernel can be found in the galaxy y's android development section. A search wouldn't harm I guess
hi im using fly on mod beta3 on mini touchwiz rom but its lagging very much... im on hells fusion kernel plz can any one help....
vlc07 said:
hi im using fly on mod beta3 on mini touchwiz rom but its lagging very much... im on hells fusion kernel plz can any one help....
Click to expand...
Click to collapse
Flash some more tweaks !
flash latest version when its not better try without sqlite optimize.
U can try pure performance !! Check development thread of galaxy y!!
vlc07 said:
hi im using fly on mod beta3 on mini touchwiz rom but its lagging very much... im on hells fusion kernel plz can any one help....
Click to expand...
Click to collapse
There are a lot of tweaks available for SGY. If you are having problem with Fly On, then try other tweaks like pure performance, vulpix, Adrenaline etc... Also you can try the latest update of Fly On.
hello everyone
i want to know that can i use hells fusion #50 kernel with purekat rom
or i need to use percy and blackheart only
i am gonna flash this rom as soon as i get to know this................
kernel
abhishekr700 said:
hello everyone
i want to know that can i use hells fusion #50 kernel with purekat rom
or i need to use percy and blackheart only
i am gonna flash this rom as soon as i get to know this................
Click to expand...
Click to collapse
purekat is build on base as AOSP..... so u will need to flash percy or black reactor since hell's fusion supports stock base roms:laugh:
abhishekr700 said:
hello everyone
i want to know that can i use hells fusion #50 kernel with purekat rom
or i need to use percy and blackheart only
i am gonna flash this rom as soon as i get to know this................
Click to expand...
Click to collapse
not sure about purekat. I tried hells fusion on reincarnation (cm7). .device boots... but wifi & bluetooth won't work ... guess it's same for purekat
hells fusion #50 can boot cm7/aosp but it does not have the correct moduals for wifi/bluetooth for use on cm7/aosp therefore if you want a fully operational phone you need to use a kernel built for cm7/aosp like percys or black reactor
better to use cm kernel !!
Boot loop
NOPE ..... You can try Percy kernal but Hells fusion will Cause Boot loop
Sanjuujosephh said:
NOPE ..... You can try Percy kernal but Hells fusion will Cause Boot loop
Click to expand...
Click to collapse
hells fusion will not cause a boot loop - hells fusion can boot cm and aosp based roms but does not contain the moduals needed for wifi and bluetooth to work (it contains moduals for use on stock based only) hense why you need a cm/aosp kernel for full phone functions
I prefer u use BlackReactor . i have use it once .
[iPhone 6] or [Samsung Galaxy S5]
>>SG Y - Hyperion 8 Rom<<
>>SG S3 mini - Official Stock Rom<<
I think wifi and bluetooth dont work because oF drivers
Anyway tell me the correct procedure for flashing blackreactor kernel along with links
And yes if I just want to feel the rom not using wifi and bluetooth then can I flash rom on hells kernel
abhishekr700 said:
I think wifi and bluetooth dont work because oF drivers
Anyway tell me the correct procedure for flashing blackreactor kernel along with links
And yes if I just want to feel the rom not using wifi and bluetooth then can I flash rom on hells kernel
Click to expand...
Click to collapse
like iv explained many times in this thread you cannot use hells fusion as it does not contain the wifi and bluetooth modual for use on cm7/aosp - that kernel is for stock roms only
hells fusion will boot it but you may find things start force closing on you and not work properly with not all phone functions working
you MUST use percys kernel or black reactor kernel if you are using cm7/aosp to get full phone functions - network wifi bluetooth etc
all kernels are in the dev section - a simple search and you will find it - in fact black reactor kernel is currently on page one of the dev thread so not really much searching required
and you just flash it in cwm with system mounted then reboot to recovery and format system data cache then mount system data cache then flash your rom zip
Go for Black Heart
marcussmith2626 said:
like iv explained many times in this thread you cannot use hells fusion as it does not contain the wifi and bluetooth modual for use on cm7/aosp - that kernel is for stock roms only
hells fusion will boot it but you may find things start force closing on you and not work properly with not all phone functions working
you MUST use percys kernel or black reactor kernel if you are using cm7/aosp to get full phone functions - network wifi bluetooth etc
all kernels are in the dev section - a simple search and you will find it - in fact black reactor kernel is currently on page one of the dev thread so not really much searching required
and you just flash it in cwm with system mounted then reboot to recovery and format system data cache then mount system data cache then flash your rom zip
Click to expand...
Click to collapse
flashed blackreactor kernel through odin and phone does not boot past kernel logo even after 20 min
gonna try through cwm recovery....will update soon
and one more thing is v5 of blackreactor kerneel stable??
abhishekr700 said:
flashed blackreactor kernel through odin and phone does not boot past kernel logo even after 20 min
gonna try through cwm recovery....will update soon
and one more thing is v5 of blackreactor kerneel stable??
Click to expand...
Click to collapse
why are you using v5 of the kernel for cm/aosp rom?
please read the thread fully!!
v5 is for stock rom (doesnt work on all basebands so use v4)
cm is for cm roms and aosp
if you are using cm7 or an aosp rom you MUST use a cm kernel!!!
marcussmith2626 said:
why are you using v5 of the kernel for cm/aosp rom?
please read the thread fully!!
v5 is for stock rom (doesnt work on all basebands so use v4)
cm is for cm roms and aosp
if you are using cm7 or an aosp rom you MUST use a cm kernel!!!
Click to expand...
Click to collapse
so i can only use cm kernel not even v4 ?
abhishekr700 said:
so i can only use cm kernel not even v4 ?
Click to expand...
Click to collapse
I will say it one last time
if you are using cm7/aosp you MUST use a kernel built for cm7/aosp
that means you cannot use a kernel built for stock (they use different mount systems hense non booting)
To make it clearer - no you cannot use v5 or v4 of black reactor kernel on cm/aosp as they are stock kernels
You MUST use the cm version of black reactor!
marcussmith2626 said:
I will say it one last time
if you are using cm7/aosp you MUST use a kernel built for cm7/aosp
that means you cannot use a kernel built for stock (they use different mount systems hense non booting)
To make it clearer - no you cannot use v5 or v4 of black reactor kernel on cm/aosp as they are stock kernels
You MUST use the cm version of black reactor!
Click to expand...
Click to collapse
Lull, thats frustrating enough...
however,
Read the op carefully guys,
ops are written very carefully.
so,
CM version == ONLY AND ONLY CM/AOSP roms.
v5 and v4 == Only for stock based roms... (However, they can booth both aosp and cm7, but ur wifi or bluetooth wont work,) pick ur poison
AH..FINALLY
Ok
i got my answer
mods please close this thread