Related
Hey guys i had wifi tethering working great. But i went to change my build.prop to allow some games to work. But after that it, this WiFi Tethering app stopps working. Well let me rephrase that, it doesnt "stop" working like a FC. But when i start the tethering, it starts up fine, but when i try to connect any device, the device cant obtain an IP address. If i revert the build.prop to the original settings, then the app works. I kinda wanna keep this app and keep the edited build.prop. So does anyone have any idea what could be happening? logcat looks fine, and there isnt a traces.txt file. so im clueless. Im gonna email the dev see what he thinks. Thanks for your ideas guys!
EDIT: SOLVED i had to switch device profiles in settings, thanks to the awesome support from the developer! I really recommend this program! I had to select Galaxy Nexus in order for it to work!
Deleted
Changelogs
Deleted
Kernel
Kernel
Features
Swap
Overclock up to 1000 MHz
Tun
Undervolt
O3 flag
Blur fix
Some new governors
Improved Camera
Improved wlan drivers
Thanks:
> Cyanogen.inc for Cm9 kernel I used as base
> Gellmar for a charger and msc fixes and sdmerge
> Qcom for the great Soc and a some help
> CodeAurora Forum for many hacks and mods for msm7x25a
If someone ask me why I don't want that my work is used, it means that you don't know xda rules so here i report the #12 that explain the sharing policy for both rom and kernel.
Cyanoid kernel is for cyanoid rom only.
XDA Rule #12. Using the work of others.
If you are developing something that is based on the work of another Member, you MUST first seek their permission and you must give credit to the member whose work you used. If a dispute occurs about who developed / created a piece of work, first try to settle the matter by private message and NOT in open forum. If this fails, you may then contact a Moderator and provide clear evidence that the work was created by you.
Convincing evidence will result in the copied work being removed. If there is no clear evidence that it was you who created the work, then in the spirit of sharing, all work will remain posted on the forums.
As an addition, developers have the right to hold exclusivity over their work for as long as it is deemed necessary by that developer. However, if the work is claimed as exclusive, it must remain as such. No selective sharing will be allowed (ie, allowing certain people to use it and not others). Should the developer decide to start sharing the work with others, the work automatically becomes fair game for all to use, albeit with the relative credit displayed.
In regard to permissions, the same rules apply for this but if permission was already given and unless there is a very valid reason, it cannot be revoked (same applies to major updates on the work). Under that same premise, permissions cannot be denied unless the work is exclusive or under extreme circumstances.
In plain English: If you want to keep your work exclusive, go for it. However, if you are going to share your work, do it fairly.
These rules apply to all software posted on XDA (including but not limited to ROMs, RUUs, apps, games, kernels, themes, icons, etc) unless that software comes with a license that waives these rules.
Click to expand...
Click to collapse
Screenshots
Deleted
holy kanging.........
★★★[jellycast_forever]★★★
emokeizer said:
holy kanging.........
★★★[jellycast_forever]★★★
Click to expand...
Click to collapse
What do you mean?
that systemui is @emokeizer's work..you should at least give credits
eyesore123 said:
that systemui is @emokeizer's work..you should at least give credits
Click to expand...
Click to collapse
This status bar isn't his work. I gave the credit to the developer on the website.
Inviato dal mio Nexus 7 usando Tapatalk 4
wifi tethering really works? impressive I don't think anyone's fixed that yet on ICS for this device or is there some other workaround that I don't know about? also wow I never seen a installer with a custom gui/touchscreen controls like this this is pretty cool. love the installation percentage meter too!
ok super brief testing theres a bug on first boot the back to home button won't work at all but restarting the phone fixes that.
and a continuous bug that seems to be on all custom roms I've tried whenever I use my Amaysim brand sim card on a custom rom it says the carrier is "Yes Optus" which is the owner of the network im on but they resell to Amaysim and so Amaysim's name should be coming up but since it isn't or for some other reason the APN fields are blank and trying to add to it, it won't save a APN so I can't get any mobile data at all. Phone calls and Texts will still work oddly.
But if I use this same sim card on my phone with stock gingerbread I can get data and it will say Amaysim as my carrier weird problem right?
If I use another simcard that's not Amaysim like Telstra (different operator) it works fine and mobile data will work.
Interesting rom I'll keep testing.
Scaregdearimasu said:
wifi tethering really works? impressive I don't think anyone's fixed that yet on ICS for this device or is there some other workaround that I don't know about? also wow I never seen a installer with a custom gui/touchscreen controls like this this is pretty cool. love the installation percentage meter too!
ok super brief testing theres a bug on first boot the back to home button won't work at all but restarting the phone fixes that.
and a continuous bug that seems to be on all custom roms I've tried whenever I use my Amaysim brand sim card on a custom rom it says the carrier is "Yes Optus" which is the owner of the network im on but they resell to Amaysim and so Amaysim's name should be coming up but since it isn't or for some other reason the APN fields are blank and trying to add to it, it won't save a APN so I can't get any mobile data at all. Phone calls and Texts will still work oddly.
But if I use this same sim card on my phone with stock gingerbread I can get data and it will say Amaysim as my carrier weird problem right?
If I use another simcard that's not Amaysim like Telstra (different operator) it works fine and mobile data will work.
Interesting rom I'll keep testing.
Click to expand...
Click to collapse
You must do a dlavik cache, for fix this home key problem, WiFi thering is working but u have to reinstall yhe thering app (system/app)
Sent from my Mi2s
linuxxxx said:
You must do a dlavik cache, for fix this home key problem, WiFi thering is working but u have to reinstall yhe thering app (system/app)
Sent from my Mi2s
Click to expand...
Click to collapse
I always clear Dalvik cache before installing a new rom but still the home key wouldn't work but all I did was restart/reboot and that fixed it.
Very cool if I get that APN/carrier issue solved I'll try out the tethering.
thanks for your response.
Scaregdearimasu said:
I always clear Dalvik cache before installing a new rom but still the home key wouldn't work but all I did was restart/reboot and that fixed it.
Very cool if I get that APN/carrier issue solved I'll try out the tethering.
thanks for your response.
Click to expand...
Click to collapse
You must follow the last part of the install video i show how to fix this, u can change ur carrier name in systemui settings, for apns when you chance somwthing press menu button and click save
Sent from my Mi2s
linuxxxx said:
You must do a dlavik cache, for fix this home key problem, WiFi thering is working but u have to reinstall yhe thering app (system/app)
Sent from my Mi2s
Click to expand...
Click to collapse
linuxxxx said:
You must follow the last part of the install video i show how to fix this, u van change ur carrier name in systemui settings, for apns when u chance somwthing press menu button and click save
Sent from my Mi2s
Click to expand...
Click to collapse
I'll make a video for you tomorrow showing you what I mean.
I know how to save apns it's just after I click save it does nothing.
I don't think the carrier name is a problem I just think it's a symptom of something else being an issue. Yes there is a way to change the carrier name to whatever I want it to be but I doubt that'll allow me to start using mobile data.
Scaregdearimasu said:
I'll make a video for you tomorrow showing you what I mean.
I know how to save apns it's just after I click save it does nothing.
I don't think the carrier name is a problem I just think it's a symptom of something else being an issue. Yes there is a way to change the carrier name to whatever I want it to be but I doubt that'll allow me to start using mobile data.
Click to expand...
Click to collapse
OK i checked, so do i have this problem, it show me 'Hutchinson 3g' intestead 3 ITA. It's an aosp setting
Sent from my Mi2s
linuxxxx said:
OK i checked, so do i have this problem, it show me 'Hutchinson 3g' intestead 3 ITA. It's an aosp setting
Sent from my Mi2s
Click to expand...
Click to collapse
Does that block you from using mobile data and are default apn settings showing up?
So since it's a Aosp setting any idea on how to fix it to enable data usage? seems weird how it's only occurring on some sims.
Scaregdearimasu said:
Does that block you from using mobile data and are default apn settings showing up?
So since it's a Aosp setting any idea on how to fix it to enable data usage? seems weird how it's only occurring on some sims.
Click to expand...
Click to collapse
Try, it worked for me
Sent from my Mi2s
linuxxxx said:
Try, it worked for me
Sent from my Mi2s
Click to expand...
Click to collapse
If by Aosp settings you mean Quick notifications panel settings for "change Carrier Label" yeah no that doesn't fix the APN issue.
Here I took a video for you It shows my Amaysim Sim card going in but Shows Yes Optus and no ability to save an APN or use Data.
and it shows I can use a vodaphone sim with mobile data and it has default apn already on it. no clue why one works and the other doesn't
anyway heres the video youtube should be cutting out the shaky-ness of it but if you catch it too soon you see it all shaky sorry about that.
https://www.youtube.com/watch?v=z4d_8BhEsr8
Scaregdearimasu said:
If by Aosp settings you mean Quick notifications panel settings for "change Carrier Label" yeah no that doesn't fix the APN issue.
Here I took a video for you It shows my Amaysim Sim card going in but Shows Yes Optus and no ability to save an APN or use Data.
and it shows I can use a vodaphone sim with mobile data and it has default apn already on it. no clue why one works and the other doesn't
anyway heres the video youtube should be cutting out the shaky-ness of it but if you catch it too soon you see it all shaky sorry about that.
https://www.youtube.com/watch?v=z4d_8BhEsr8
Click to expand...
Click to collapse
Have u try using operator name? Or can u use an auto_config SMS? (This will depend by your operator) is this phone brand?
Build 8 relased for the 1000 post on the androidiani.com forum!!!
Inviato dal mio Nexus 7 usando Tapatalk 4
Scaregdearimasu said:
If by Aosp settings you mean Quick notifications panel settings for "change Carrier Label" yeah no that doesn't fix the APN issue.
Here I took a video for you It shows my Amaysim Sim card going in but Shows Yes Optus and no ability to save an APN or use Data.
and it shows I can use a vodaphone sim with mobile data and it has default apn already on it. no clue why one works and the other doesn't
anyway heres the video youtube should be cutting out the shaky-ness of it but if you catch it too soon you see it all shaky sorry about that.
https://www.youtube.com/watch?v=z4d_8BhEsr8
Click to expand...
Click to collapse
I watched the video it look like a SIM problem, try tour SIM on another phone or contact your provider
Inviato dal mio Nexus 7 usando Tapatalk 4
Enabled stock tether with help of XPosed Framework and Moto Tether Module.
Tried the straitforward way of just modifying build.prop and moto tether module but wasn't able to get out to the web. Curious to know if all my steps were necessairy. Here is what I did to get it working.
Needed:
Root
SQLLiteEditor
Build.Prof editing ability
XPosed Framework & Module X Tether also known as Moto Tether
Steps:
Edited the following database with SQLLiteEditor.
\data\data\com.android.providers.telephony\databases\telephony.db
Opened carriers
Filter/searched for the word boost for my ignorance here I edit all of them.
Under column 'type' change any that say default,MMS to default,MMS,dun and also change any that say fota,ia to fota,ia,dun
Exit SQLLiteEditor
I rebooted and installed the XPosed Framework with Module X Tether also known as Moto Tether
Changed the Line in the build.prop ro.mot.tether_dun_required=1 to ro.mot.tether_dun_required=0
Rebooted and then it worked.
I did all of the steps listed above. I still cannot get my tablet connected to the internet when I am broadcasting the wifi network via the built in Moto E 2015 tether app. The tablet connects to the network using the password I created for it but will not load any webpages. They all timeout.
The moto E itself does have internet connectivity when tethering and when not.
Please help if possible!
Thanks
zdeno88 said:
I did all of the steps listed above. I still cannot get my tablet connected to the internet when I am broadcasting the wifi network via the built in Moto E 2015 tether app. The tablet connects to the network using the password I created for it but will not load any webpages. They all timeout.
The moto E itself does have internet connectivity when tethering and when not.
Please help if possible!
Thanks
Click to expand...
Click to collapse
The exact same thing happen to me while I was tinkering to get this working. I thought it should be working and wasn't, that's why I thought the order had something to do with it and posted mostly for me to remember what I had done. I tried everything, pinged gateways, static IP address on my tablet, you name it, to try to determine why it didn't work. Double checked for dumbthumb.
My setup, stock firmware that came with the phone, unlocked and rooted, running TWRP for what it's worth. I have in the past disabled some nobrainer bloat and even uninstalled or disabled some of the Motorola software. Maybe I missed something i did that was silly between steps too but, nothing huge I think.
You are the only one who reported back so far that tried. Wish there were at least someone reporting success with feedback.
I just tested my tablet and it still works DHCP, nothing special on the tablet side. If i get a hot moment, I'll go back to stock and re-do the process to see if I yield other results but, for now I recommend trying again, clear cache's and normal Android type stuff. Double check that XPosed and everything is working, rebooted etc..
deansouth8 said:
The exact same thing happen to me while I was tinkering to get this working. I thought it should be working and wasn't, that's why I thought the order had something to do with it and posted mostly for me to remember what I had done. I tried everything, pinged gateways, static IP address on my tablet, you name it, to try to determine why it didn't work. Double checked for dumbthumb.
My setup, stock firmware that came with the phone, unlocked and rooted, running TWRP for what it's worth. I have in the past disabled some nobrainer bloat and even uninstalled or disabled some of the Motorola software. Maybe I missed something i did that was silly between steps too but, nothing huge I think.
You are the only one who reported back so far that tried. Wish there were at least someone reporting success with feedback.
I just tested my tablet and it still works DHCP, nothing special on the tablet side. If i get a hot moment, I'll go back to stock and re-do the process to see if I yield other results but, for now I recommend trying again, clear cache's and normal Android type stuff. Double check that XPosed and everything is working, rebooted etc..
Click to expand...
Click to collapse
Thanks for the response nonetheless, I may try to get Treve Wifi MOD to work instead. I haven't been having success in finding the correct settings to work with that app either, unfortunately.
zdeno88 said:
Thanks for the response nonetheless, I may try to get Treve Wifi MOD to work instead. I haven't been having success in finding the correct settings to work with that app either, unfortunately.
Click to expand...
Click to collapse
No misconception. I got this working with XPosed Framework for Lollypop enabled and working, with Module Moto Tether installed and enabled. There really weren't any settings for Moto Tether other than having it enabled in Xposed.
Good luck.
I have still been unable to find the right mix of settings to get my Boost Mobile Moto E 4G to become a hotspot using Wireless Tether (code. google.com/p/wifi-tether-treve-mod/downloads/list).
Can anyone help out and let me know how to get this to work???
Many many thanks.
zdeno88 said:
I have still been unable to find the right mix of settings to get my Boost Mobile Moto E 4G to become a hotspot using Wireless Tether (code. google.com/p/wifi-tether-treve-mod/downloads/list).
Can anyone help out and let me know how to get this to work???
Many many thanks.
Click to expand...
Click to collapse
Okay... I see some more potential confusion. The xposed framework module download is called x tether. There module after installation is called Moto Tether. Sorry if there was confusion. I'm on boost Mobile and its working.
Installed exposed and the x feather and modified the build prop, still can't get this to work. Do I need to do what the OP listed also?
deansouth8 said:
Okay... I see some more potential confusion. The xposed framework module download is called x tether. There module after installation is called Moto Tether. Sorry if there was confusion. I'm on boost Mobile and its working.
Click to expand...
Click to collapse
I did do all of that as you listed in the OP. I was unable to get internet connectivity through tethering. It would only create the hotspot but didn't provide internet connectivity itself.
I am now trying to use the WIFI treve mod that is pretty popular with a number of devices. I am trying to find the right settings within that app to get that to work. So far I have been unsuccessful.
Got it working , using op instructions
I have a rooted Boost Mobile Moto E 2nd gen LTE (surnia xt1526) and have found a way to enable WiFi tethering without Xposed, etc. Using the app Build.prop editor I changed the value of "ro.mot.tether_dun_required" to "0" and added the value (
---------- Post added at 04:17 PM ---------- Previous post was at 04:08 PM ----------
Apologies for the cut-off post there.. Had to register to leave a post of greater length.. Anyway, as I was saying:
I changed the value of "ro.mot.tether_dun_required" to "0", and added the line "net.tethering.noprovisioning=true" to the end of the "build.prop" file using the app "build.prop editor" offa the Play Store.. That's it! Worked for me, hope it does for you, as I haven't been able to find any working fixes for my particular model of the Moto E.
johnmunsey said:
I have a rooted Boost Mobile Moto E 2nd gen LTE (surnia xt1526) and have found a way to enable WiFi tethering without Xposed, etc. Using the app Build.prop editor I changed the value of "ro.mot.tether_dun_required" to "0" and added the value (
---------- Post added at 04:17 PM ---------- Previous post was at 04:08 PM ----------
Apologies for the cut-off post there.. Had to register to leave a post of greater length.. Anyway, as I was saying:
I changed the value of "ro.mot.tether_dun_required" to "0", and added the line "net.tethering.noprovisioning=true" to the end of the "build.prop" file using the app "build.prop editor" offa the Play Store.. That's it! Worked for me, hope it does for you, as I haven't been able to find any working fixes for my particular model of the Moto E.
Click to expand...
Click to collapse
Thanks! This worked flawless on my Virgin Mobile XT1526
Yes seems pretty easy to do on this version of the Moto E. I put my page plus sim in before activated on Verizon, XT 1528 and the native Wi-Fi hotspot option works beautifully for free apparently.
johnmunsey said:
I have a rooted Boost Mobile Moto E 2nd gen LTE (surnia xt1526) and have found a way to enable WiFi tethering without Xposed, etc. Using the app Build.prop editor I changed the value of "ro.mot.tether_dun_required" to "0" and added the value (
---------- Post added at 04:17 PM ---------- Previous post was at 04:08 PM ----------
Apologies for the cut-off post there.. Had to register to leave a post of greater length.. Anyway, as I was saying:
I changed the value of "ro.mot.tether_dun_required" to "0", and added the line "net.tethering.noprovisioning=true" to the end of the "build.prop" file using the app "build.prop editor" offa the Play Store.. That's it! Worked for me, hope it does for you, as I haven't been able to find any working fixes for my particular model of the Moto E.
Click to expand...
Click to collapse
Great Job BRO..It worked for me great
I recently acquired a Sprint-Prepaid branded moto e lte/2015/xt1526 and activated with no problem on RingPlus. I have LTE data on the phone no problem.
But I can't share via the WiFi hotspot. So I rooted, etc, etc, and tried the two build.prop tweaks suggested here. Still no joy.
I guess the phone's code has been updated to ignore those build.prop settings that make it all too easy to turn on Wifi-tethering.
Guess I'll try hacking telephony.db next, since running as either root or userid radio and invoking the APN settings editor via the am command yields a message that APN editing is not allowed for "this user".....
Any other bright ideas?
bob.teatow said:
I recently acquired a Sprint-Prepaid branded moto e lte/2015/xt1526 and activated with no problem on RingPlus. I have LTE data on the phone no problem.
But I can't share via the WiFi hotspot. So I rooted, etc, etc, and tried the two build.prop tweaks suggested here. Still no joy.
I guess the phone's code has been updated to ignore those build.prop settings that make it all too easy to turn on Wifi-tethering.
Guess I'll try hacking telephony.db next, since running as either root or userid radio and invoking the APN settings editor via the am command yields a message that APN editing is not allowed for "this user".....
Any other bright ideas?
Click to expand...
Click to collapse
Do you have one of the Ring Plus plans that allow tethering?
If you can get stock working I would be interested in the steps needed.
If not, you should be able to use WiFi Tether Router - $2.80 from the play store and requires root.
OKAY. Thanks. I tried several other apps with similar names but genuine "WiFi Tether Router" for $2.80 seems to be working fine now on my xt1526 on Ringplus (Sprint)
I just carefully followed the config directions for Xt1526 and Sprint on the developer's webpages. (The out-of-the-box defaults do not work and I required a reboot to continue...)
(I would have paid more for this!)
Hooray. I won't confess how many hours I spent today trying various hacks. I learned a bit about adb and android. But not nearly enough. And oh by the way - I have been a professional Linux/C++/Java systems programmer/hacker for the last 10+ years. Haven't learned all the ins and outs of Android, since it's so darned easy to just download an app... Actually I use my Android Tablet, wifi Tethered to my phone, ssh'ing back to my computer at home (JuiceSSH highly recommended too!) to get my work done while waiting for the kids or wife at the mall...
I was using another phone on another carrier which only required a simple APN add the ",dun" string/edit to get that working -- but I couldn't pass up the practically free plans that Ringplus is offering...
My xt1526 is "stock" EXCEPT, I did the Moto unlock the bootloaders thing and "rooted" by fastbook/flashing a TWRP recovery image, also from this XDA board, of course.
nobreak1970 said:
Yes seems pretty easy to do on this version of the Moto E. I put my page plus sim in before activated on Verizon, XT 1528 and the native Wi-Fi hotspot option works beautifully for free apparently.
Click to expand...
Click to collapse
How did you edit the build.prop without root on the VZW Moto E? Or is this only for first gen Moto? I have VZW Moto E 2nd gen, android 5.1, activated with my postpaid sim.
thanks for any advice!
paul
I have a rooted Sprint pre-paid xt1526 comes with a stock Boost mobile firmware on a Ring+ plan with no tethering. Hotspot functionality is there and I can turn it on. I can connect other devices to it, but traffic doesn't reach to the internet.
I actually only need to modify the iptables every time after reboot to enable forwarding and NAT. Works perfect. "Wifi Tether" app works too, but it is a battery killer.
Tried everything everyone has said and still can't get it working. Device connects to hotspot but isn't allowed internet access. Any ideas?
ive searched and searched... only thing i found was wifikill everywhere and i dont need that
please, i dont want to change my password
yenkoPR said:
ive searched and searched... only thing i found was wifikill everywhere and i dont need that
please, i dont want to change my password
Click to expand...
Click to collapse
Configure "Allowed Devices"... maybe? Other than that I really don't know what else you can do, there doesn't seem to be much configuration on Mobile hotspot like you could on a regular modem. It's either allowed devices or changing the password.
ShaDisNX255 said:
Configure "Allowed Devices"... maybe? Other than that I really don't know what else you can do, there doesn't seem to be much configuration on Mobile hotspot like you could on a regular modem. It's either allowed devices or changing the password.
Click to expand...
Click to collapse
Correct, make sure that the devices you want to be connected to your mobile hotspot are connected already so that you can add them to your "Allowed devices".
Yes, config your 'Allowed Devices' list for clients of your mobile hot spot.
ShaDisNX255 said:
Configure "Allowed Devices"... maybe? Other than that I really don't know what else you can do, there doesn't seem to be much configuration on Mobile hotspot like you could on a regular modem. It's either allowed devices or changing the password.
Click to expand...
Click to collapse
nougat didnt have that option, it was weird tho, but u could only rename or change password, no more... im back with mm
Hey All,
I had to update this thread a little it was pretty terrible on wording and full details. (Sorry About That)
The current hotspot hack still works on this new update too which is now CRL2.
You still need to add dun but it will look like this example below....
Ex: default,mms,dun,xcap,supl << Credits to whoever found this out first I just applied it to here and it works I’m currently using it now for this post :fingers-crossed::good:
*In order to edit your APN you will have to download Quick Shortcut App from the Play store*
Another thing if you didn’t know Good Lock is out and working perfectly too with new clock options and custom pulldown options that you can set to your liking.
*I added screenshots to help set what I set or how my good lock looks.*
I have a T-Mobile S8+ on Sprint network, and OTA keeps failing.
Can I just ODIN T-Mobile S8+ with Sprint's RIB firmware when it comes out?
Will I lose data?
lentm said:
I have a T-Mobile S8+ on Sprint network, and OTA keeps failing.
Can I just ODIN T-Mobile S8+ with Sprint's RIB firmware when it comes out?
Will I lose data?
Click to expand...
Click to collapse
that im am not sure of...id reommend readin around before you upgrade
alot of things has changed in the ui...im sure some code have changed too
Tha_Dynasty2049 said:
that im am not sure of...id reommend readin around before you upgrade
alot of things has changed in the ui...im sure some code have changed too
Click to expand...
Click to collapse
Thanks, I still can't find the answer in the other threads though.
What does xcap and supl do for the apn settings?
zune70 said:
What does xcap and supl do for the apn settings?
Click to expand...
Click to collapse
they was added by sprint in the newest update
it was not like this before the update
XCAP is a protocol which enables a user configuring his service data (e.g., modifying a call forwarding number, changing his barring services) on the Multimedia Telephony Application Server (MTAS). The XCAP flow is typically carried over the default bearer of the Internet APN.
SUPL is a technology which utilizes existing standards where available and possible, to transfer assistance data and positioning data over a User Plane bearer, such as IP, to aid network and SUPL Enabled Terminal (SET) based positioning technologies in the calculation of a SET's position
lentm said:
Thanks, I still can't find the answer in the other threads though.
Click to expand...
Click to collapse
Id say leae it then...id like to have a perfect working phone over guessing for a new software you may not like
Tha_Dynasty2049 said:
The new October Patch is nice so far....they have disabled Calling Plus but gave u the real feature
which is under connections and then voice networks and you will see VoLTE
turn it on if you want to use internet and phone at the same time.
Besides that we got AR Emojis and now super slow motion.
My hotspot hack still works on this new update too.
You still need to add dun but it will look like this below....
Ex: default,mms,dun,xcap,supl << Credits to whoever found this out first I just applied it to here and it works im currently using it now for this post :fingers-crossed::good:
Another thing if you didnt know GoodLock is out and working perfectly too with new clock options and custom pulldown options
*I added screenshots to help set what i set or how my good lock looks.*
Click to expand...
Click to collapse
How do we get the hotspot?
EDIT: NVM, got it!
JoeFCaputo113 said:
How do we get the hotspot?
EDIT: NVM, got it!
Click to expand...
Click to collapse
Great...
I did forget to mention i got to my apn settings by using Quick Short Cut Maker App
Tha_Dynasty2049 said:
Great...
I did forget to mention i got to my apn settings by using Quick Short Cut Maker App
Click to expand...
Click to collapse
Have you done the new update yet? Did Hotspot still work?
13druber said:
Have you done the new update yet? Did Hotspot still work?
Click to expand...
Click to collapse
Yes currently using it on CRK1 now to reply
Is there a way to convert CRL2 to CRL 1?
This is still working on CRL2. I just redid mine last night. Are you having a problem with it?