Made Xperia Z damn loud with some mods - Xperia Z General

Hi,
Yesterday my vibrator broke on my phone and this made me to open the phone for the second time. I took off the backglass and tried to fix it but had no succes. But since I really don't put my phone in water I decided to expiriment with stuff.
I always wanted make my xperia Z louder so I installed zero's puresound mod but it was still not loud enough, so I took off the sponge/rubber and the loudspeakers glass. I can't believe that this phone is so loud now atm. All I ever wanted from this phone just with one easy mod done.
If your warranty is void and don't care about the waterproofness you can also do this. Since I'm going to take my phone apart again I will take some pictures.
I'm not going to shower and take phonecalls anyway, before this I never had a waterproof phone so I can live with that.
Sent from my C6603 using xda premium

Did you managed to put the back plate on without replacing the adhesive? Is it stiff?
Sent from my Xperia Z

Yes, I just heated up with a hairdryer until it melted and paste it back on. It's already my second time that I've done it.
Sent from my C6603 using xda premium

It's louder than a iphone 5 now, the speaker is very powerfull of this phone but we've never realized it
Sent from my C6603 using xda premium

JasonX199 said:
Yes, I just heated up with a hairdryer until it melted and paste it back on. It's already my second time that I've done it.
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
2 times and still you can stiff the back cristal?... how many time you heat the cristal to take off and how many to melt and put the cristal again?
THNX

mcyorian said:
2 times and still you can stiff the back cristal?... how many time you heat the cristal to take off and how many to melt and put the cristal again?
THNX
Click to expand...
Click to collapse
About 30 to 60 seconds. I think that the glue lacks quality since it's easy to take it off. The glue used on the battery is made of better quality. Could be because the glue on the battery is thicker
Sent from my C6603 using xda premium

Many Thanks for sharing this. Can you plz share the pics plz.

pratiknaik said:
Many Thanks for sharing this. Can you plz share the pics plz.
Click to expand...
Click to collapse
I will share them today when I'm at home
Sent from my C6603 using xda premium

Took off the right glass and pushed the sponge from the outside of the speaker hole and took it off from inside.
Sent from my C6603 using xda premium

More here
Sent from my C6603 using xda premium

Any way for you to compare the sound volume now ?
Sent from my beautiful purple best friend, the Xperia Z

mety333 said:
Any way for you to compare the sound volume now ?
Sent from my beautiful purple best friend, the Xperia Z
Click to expand...
Click to collapse
Well I don't have another xperia z tbh so I don't know how. I wish I made a video like before and after while doing this. I'm very pleased atm with it now
Sent from my C6603 using xda premium

We can do it together.
Download sound meter from the market and then play one of the sony ringtones and tell me which one by name. I'll do the same and we'll both see by decibels how louder your speaker is compared to my stock one.
https://play.google.com/store/apps/details?id=kr.sira.sound
Sent from my beautiful purple best friend, the Xperia Z

Related

Cracks on Arc S housing

Let's see what is happening with the Arc S housing, do you have any cracks like some of the original Arc owners?
Please vote and let us know after how long did the crack appeared and if you use the power button a lot (some people say that it may be the cause).
I use the home button to wake the device and I have a widget to turn it off and so far no crack on white Arc S.
Correct me if I'm wrong, but I was under the impression that cracks in the housing never were an issue with the white Arc? Wasn't it a pure black housing problem?
Sent from my LT15i using XDA App
Nope, there's a pic of a cracked, white Arc S somehwere on the forum.
Sent from my iPad 2 using Tapatalk
A month ago I found some users here and there complaining about the white one.. With evidence ( photos)
Sent from my LT18i using xda premium
I don't believe on that picture...
Sent from my LT18a using Tapatalk
Why??
Sent from my LT15i using XDA Premium App
Arc S Gloss Black and it has the crack,, huftt
Where's Markus_SE_Answers?
He should see this...
Sent from my iPad 2 using Tapatalk
I have bought my Xperia Arc S for 3 months and not its appeared cracks on it..I use power button for locking myIs there any way to fix it by SE?
7 month using arc, no cracks
Misty silver
Sent from my LT18i using XDA App
am2222 said:
I have bought my Xperia Arc S for 3 months and not its appeared cracks on it..I use power button for locking myIs there any way to fix it by SE?
Click to expand...
Click to collapse
Take it to your closest local Sony Ericsson service, they will fix it for free if your warranty is valid
Sent from my LT18i using xda premium
I hope that Sony has taken a lesson and that we will not see those cracks on future models by using better quality plastics!
Mine has cracked too...
It's barely noticable but definitely there, under the sensor. I've been extremely careful with how I handle the phone, I just woke up one day and found it like this.
iR¡[email protected]!* via Tapatalk
Your device is the perfect example that it isn't caused by the user, because you have a case on it when I see it right.
Oh, on the white ones the crack sucks even more, because you can see it more clearly than on the black ones because of the black plastic under the white paint
Sent from my iPad 2 using Tapatalk
I heard somewhere that the power button may cause the crack because of the continuous pressure to the infected area and after a lot of use, that's why I prefer to use a gadget on my screen to turn it off and pressing the home button to wake the device. Only time will tell...
reptile64 said:
I heard somewhere that the power button may cause the crack because of the continuous pressure to the infected area and after a lot of use, that's why I prefer to use a gadget on my screen to turn it off and pressing the home button to wake the device. Only time will tell...
Click to expand...
Click to collapse
I hate the power button, you have to apply a lot of pressure and I am convinced this is the cause.
My brother saw mine before he got his and uses a swipe down to lock screen, have hardly touches his button and has no crack.
Almost every arc and arc S I have seen has a crack.
Sent from my Arc via transwarp beacon.
adoet_t said:
Arc S Gloss Black and it has the crack,, huftt
Click to expand...
Click to collapse
I have literally the same one
Sent from my LT18i using xda premium
iridaki said:
Mine has cracked too...
It's barely noticable but definitely there, under the sensor. I've been extremely careful with how I handle the phone, I just woke up one day and found it like this.
iR¡[email protected]!* via Tapatalk
Click to expand...
Click to collapse
I am very sorry to hear that... Do you have warranty? On my ARC S I have GelaSkins so can't see if there is a crack yet. Do you use a Lock button often as some people say that that can cause these cracks?
Ninolina said:
Do you use a Lock button often as some people say that that can cause these cracks?
Click to expand...
Click to collapse
Yes, she is using it a lot
I have a Midnight Blue arc (not S) so it might be irrelevant here but I've owned it for a year and there are no cracks so far. The way I press the power button is using my fingernail so it won't exert pressure on the body, that is if the said pressure is what's causing the problem.

A problem with xperia arc s

Today I just noticed that if I flick or knock the back microphone the phone will auto restart (probably the force acted on the internal hardware to strong?).This happened on the back microphone area only.Can anyone comfirm that this is normal?
Sent from my LT18i using xda premium
Your battery is loose! Put a piece of paper to make it still! :good:
Sorin90 said:
Your battery is loose! Put a piece of paper to make it still! :good:
Click to expand...
Click to collapse
Yep, your suggestion does help to prevent the phone from restarting.Thanks for the help.
Problem Solved
Sent from my LT18i using xda premium

Water test...*kuch* failed

Well, after usual setup, playing around and other things you do when you received your toy I tried the famous watertest. Which I bought it for.
After checking the bits and pieces that need to be closed, I gently placed it in the filled sink while playing some iptv show and recorded it. Nice to show up when with friends and so. See? No problem!
hone resp
Recording went great but when I went back to the room the screen started to glitch and touchscreen stopped working. Phone went into reboot loop and freaked out. After removing SIM and SD card and pushing the red button the phone started. When it was ready booting, the touchscreen was still not working. After a few minutes, the screen started to flicker.
So for those who want to try. Please do, now it's still under warranty.
Thre's a youtube movie of this happening on the IFA too. Don't know the name of it.
This one will be returned.
I haven't tried yet and wasn't really planning on doing so, but your thread is tempting me... After all it is supposed to be a water proof phone, right?
For someone that has already dealt with Sony, how easy is it to deal with them for a warranty aim like this?
Sent from my C6903 using xda app-developers app
I stuck my phone in the sink tonight for a minute. Still works fine.
If yours doesn't get it replaced
Sent from my C6903 using xda premium
I was on Facebook in the shower for about 10 minutes ha never had a problem in a pool or anything until I broke the flap on the charger port and lost it so no more waterproof for me
Sent from my C6903 using xda app-developers app
Mines been in the sink a few times, been in the shower too.. no issues.
pikeylfc said:
I was on Facebook in the shower for about 10 minutes ha never had a problem in a pool or anything until I broke the flap on the charger port and lost it so no more waterproof for me
Sent from my C6903 using xda app-developers app
Click to expand...
Click to collapse
you will be able to buy a new flap/cover here in the near future - one of the reasons why the dock or magnetic cable is a must have
http://rounded.com/
to the OP - you might have trouble convincing Sony that you had all the flaps properly closed, they can do a vacuum test on the phone but you are putting you trust in them to be honest and truthful about their findings
here's an interesting water damage pack http://www.clove.co.uk/rescuetec-water-damage-repair-recovery-kit
I really hope so I sent them a email thanks I ordered one of the magnetic chargers
Sent from my C6903 using xda app-developers app
I think you shouldnt open flaps after having it in water. I understand that They Were closed under water, but when it was still wet, some water could have Got under flaps when you opened them and sony May say that They were not properly closed
Sent from my C6903 using xda app-developers app
I was swimming with mine for about 3 hours in a pool, filming and shooting even deeper than 1,5m, no problem whatsoever.
naga.nino said:
I was swimming with mine for about 3 hours in a pool, filming and shooting even deeper than 1,5m, no problem whatsoever.
Click to expand...
Click to collapse
Balls of steel you have there mate
Sent from my C6603 using XDA Premium 4 mobile app
Thraxzzz said:
Balls of steel you have there mate
Sent from my C6603 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well, my previous phone was xperia Z and every time I went into the pool I took Z with me and stayed for at least 2 hours in the water and never had a single issue. As Z1 is even more waterproof, I had no problem whatsoever taking it with me.
I've tested my phone on a log flume and in a jug of water. No problems....
https://www.youtube.com/watch?v=Ibs6crPF5B4&feature=youtube_gdata_player
Sent from my C6903 using xda app-developers app
Yesterday I washed my phone, no issues.
I think it was a defective product. No luck with yours :/
Sent from my C6903 using xda app-developers app
Some forum member wanted to know whether the flaps were (properly) closed. They were...I recorded it. And checked about a dozen times. It's a 600+ euro device...So Sony can claim what they want. A vacuum test will show the answer.
Nice thing happened when packed for returning it. It went on for no reason (without display ofcourse) and after an hour I felt heat through the box (the original box it comes in when buying it).... barely couldn't touch the device, had to reset the device (button near the SIM) and now it's on a fireproof place just in case awaiting arrival of the repair guy.
(pickup and return guy actually)
I took the plunge last night and submerged my phone to show it to friends. It still works fine....
Shame about the phone. I tried mine this morning while showering. Took some pictures and they turned out to be rather artsy (yes,they're SFW)!
Sent from my C6903 using xda app-developers app
Here's the instructions regarding using the phones waterproof features.
http://userguide.sonymobile.com/referrer.php?region=gb&product=xperia-z1#!Water-resistance.html
Sent from my Sony Xperia Z1 C6903
expertzero1 said:
Here's the instructions regarding using the phones waterproof features.
http://userguide.sonymobile.com/referrer.php?region=gb&product=xperia-z1#!Water-resistance.html
Sent from my Sony Xperia Z1 C6903
Click to expand...
Click to collapse
Don't get me wrong, I still love the phone and of course this one somehow slipped through QA. It's not a rant against Sony or something. I just want to say that It is possible that the phone isn't waterproof in all cases. So be carefull when dropping it in the water. Just like the girl on the IFA youtube clip already showed us. She tried a working device at the Sony demo stand and was allowed to submerge it. Device broke. Whoops...
By the way does anyone played with the touch block feature? Whatever that is? It seems some sort of automatic touchscreen disable feature so that the water does not causes fake touch presses.
May be with this article, you prevent issues in the futur ?
http://item.mobileweb.ebay.co.uk/viewitem?itemId=151015424680
Oil Vaseline to keep your flap waterproof
Sent from my Nexus 7 using xda app-developers app
Oops wrong thread sorry.

Waterproof!

Just had to give it a go
Sent from my Z1
*Ring ring*...
"who's there?"
"fish"
"fish who?"
"it's me dickhead, a fish"
Sent from my C6903 using XDA Premium 4 mobile app
Haha...fish looks so happy
Sent from my Z1
I put the phone under water when running benchmarks, makes the phone run cooler and get nice scores :sly:
Sent from my Xperia Z1 using Tapatalk
Went free diving with my Z1 when it was only a week old! This was taken by me in the red Sea. My friend, seen in the photo, took it to depths of 10+ meters without any major problems. Only issue I had was the external speaker going quiet, but once the phone had aired and dried out over night, it went back to normal. I know Sony don't recommend taking it in salt water, but I thought I'd risk it!
Hope you all like the shot.
Sent from my C6903 using xda app-developers app
Seriously awesome! I just wouldn't have risked it.lol
Hi man...is your touch screen working good after that waterproof test?
Cuz I've git done problem on mine and send it to repair,just to know if it was related to the same test that I've done....
Inviato dal mio HTC Desire HD A9191 con Tapatalk 2
wezzel98765 said:
Seriously awesome! I just wouldn't have risked it.lol
Click to expand...
Click to collapse
I would have taken the risk to get some pictures
niko1983 said:
Hi man...is your touch screen working good after that waterproof test?
Cuz I've git done problem on mine and send it to repair,just to know if it was related to the same test that I've done....
Inviato dal mio HTC Desire HD A9191 con Tapatalk 2
Click to expand...
Click to collapse
Hey man, yeah my touch screen works fine. No problems whatsoever except for what I mentioned about the speaker.
Sent from my C6903 using xda app-developers app
Cool! So this is what the botton of the red sea looks like
indy.89 said:
Went free diving with my Z1 when it was only a week old! This was taken by me in the red Sea. My friend, seen in the photo, took it to depths of 10+ meters without any major problems. Only issue I had was the external speaker going quiet, but once the phone had aired and dried out over night, it went back to normal. I know Sony don't recommend taking it in salt water, but I thought I'd risk it!
Hope you all like the shot.
Sent from my C6903 using xda app-developers app
Click to expand...
Click to collapse
indy.89 said:
Went free diving with my Z1 when it was only a week old! This was taken by me in the red Sea. My friend, seen in the photo, took it to depths of 10+ meters without any major problems. Only issue I had was the external speaker going quiet, but once the phone had aired and dried out over night, it went back to normal. I know Sony don't recommend taking it in salt water, but I thought I'd risk it!
Hope you all like the shot.
Sent from my C6903 using xda app-developers app
Click to expand...
Click to collapse
It's not rated to survive in saltwater but it's cool to see that it does.
JuicyBrah said:
It's not rated to survive in saltwater but it's cool to see that it does.
Click to expand...
Click to collapse
Yeah I know it's not rated for saltwater. I was in and out of the sea for 10 days (holiday), using it underwater for about 40 mins at a time.
I only risked it as my device is insured and it wouldn't have been a problem to get a new one
Sent from my C6903 using xda app-developers app
Hally79 said:
Just had to give it a go
Sent from my Z1
Click to expand...
Click to collapse
guys after having a phone swim
when do you plug the charger ?!
another curious question
what happens to the speaker if u got a phone call under water !
Also i would like to go diving and record my GPS route through My tracks or what ever app. Would be nice
Just dry the outside of your phone and you'll be good to plug the charger in. That's what I did anyway. Not sure about using the speaker underwater. Can't see anything going wrong with it, but I could be wrong.
Sent from my C6903 using xda app-developers app
There´s no signal under water.
Actually took my phone in a swimming pool today, put it in an airtight plastic bag just in case the Chlorine does something but water got in that when I was at the bottom of the pool (no surprise) so I took it off and took the camera for a spin. (If I remember correctly its certified for 1.5m for 30 minutes, I was at 2.5m; the deepest part of the pool for 5 minutes, off course I went up for breath )
I had a muffled speaker for a few minutes but that disappeared when I got home.
ashouhdy said:
what happens to the speaker if u got a phone call under water !
Click to expand...
Click to collapse
That shouldn't be a problem
I watched a short movie while the phone was under water, you can even
hear the sound without problems if the volume is high enough.
Dont ask me why i did that but its funny
galuquetta said:
There´s no signal under water.
Click to expand...
Click to collapse
No signal under 2 meters why!!! I was in a submarine once for sight seeing in the redsea and catched signal
Sent from my C6903 using Tapatalk
---------- Post added at 04:05 AM ---------- Previous post was at 04:04 AM ----------
MeLViN-oNe said:
That shouldn't be a problem
I watched a short movie while the phone was under water, you can even
hear the sound without problems if the volume is high enough.
Dont ask me why i did that but its funny
Click to expand...
Click to collapse
Me too doin nonsense by the waterproof but just fun... watched youtube videos while taking shower loooooollll
Sent from my C6903 using Tapatalk
---------- Post added at 04:07 AM ---------- Previous post was at 04:05 AM ----------
indy.89 said:
Just dry the outside of your phone and you'll be good to plug the charger in. That's what I did anyway. Not sure about using the speaker underwater. Can't see anything going wrong with it, but I could be wrong.
Sent from my C6903 using xda app-developers app
Click to expand...
Click to collapse
If isnt 100% dry it would catch fire and smoke
Sent from my C6903 using Tapatalk
My z1 is the same as most other people's, speaker goes muffled for about 5 mins. I've never put mine on charge as soon as it's left the water! I use the magnet charger now so no need to open the ports to charge it
Sent from my C6903 using XDA Premium App
So yer, my wife has the z1.... She decided to test hers out the normal way and drop it down the toilet.. As you do
Low and behold it broke, all ports were closed!
I'm currently drying it in rice, but I can see different shades behind the screen looks like water got in. It's working but looks bad, gonna let it dry out fully turned off. Would you risk keeping the device out just get it changed under warranty
Sent from my GT-I9300 using Tapatalk

Xperia Z Headphone flap popping out

Hello guys, Its being 1month my xperia ZL got replaced by Z. Now m facing a problem. My earphone flap is popping out for evry minute i close. I cant find any solution for it. I tried every possible solution. Thanks in advance!
Sent from my C6603 using XDA Premium 4 mobile app
SonyRiFle said:
Hello guys, Its being 1month my xperia ZL got replaced by Z. Now m facing a problem. My earphone flap is popping out for evry minute i close. I cant find any solution for it. I tried every possible solution. Thanks in advance!
Sent from my C6603 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Those flaps aren't really tough like the body. I suggest u should keep the phone away from Water.. If warranty exists, go to the service center and complain.. Next time, be careful with the flaps..
I've had my XZ since launch and it's fine - loose, but stays in when I close it. How have you been using the flap? Yanking it out with all your strength or something?
The only thing you really can do is get it replaced if it's under warranty.
I've always been carful with the flaps, but they are honestly the biggest physical design flaw of the XZ imho, and greatly improved in following models. The rubber seals roll and stretch just by closing and opening, and eventually will get caught and tare. I've replaced mine once already on the charge port. The port covers are a sloppy cheap design.
Also another reason I'm looking for an upgrade - mag charge cable so I don't have to keep opening the mini usb port.
Better flap design rather than higher IP Rating is way more important. In the case of XZ, it seems the flaps have been left out in terms of durability. I hope that's what newer premium models bring.
Sent from my C6603 using Tapatalk
Had a similar problem try cleaning it with a cotton swab.
There's also an old thread discussing the same.
Don't use liquids otherwise you'll void your warranty.
That being said I "CAREFULLY " used a swab and isopropyl alcohol to clean mine.
It might just be a dust problem on sides.
Sent from my C6602 using XDA Free mobile app
Next time don't buy defective Xperia phones. I have the same issue...
Sent from my C6603 using XDA Premium 4 mobile app
well you can order a new slot cover http://www.amazon.com/Black-Audio-M...8V5S/ref=sr_1_1?ie=UTF8&qid=1410593102&sr=8-1
and replace them your self
I jst cleaned it all with A safety pin...its fyn.Now m facing prblm with my charging port :-/,the rubber just popped out
Sent from my C6603 using XDA premium app

Categories

Resources