I unlocked my UK vodafone flashed the BTU version but kies does not recogonise my fimware.I tried flashing back to Vodafone firmware but my phone is slovakian and kies does not recognise my firmware.I used odin 3.04 .Do i need to include a pit file ? The vodafone software has 4 files inside but the BTU only has one.
GT-I9505 Galaxy S 4 LTE
PDA: I9505XXUBMEA
CSC: I9505VFGBMF2
MODEM: I9505XXUBMEA
What am i doing wrong ?
Related
I am new at all of this. So excuse me, I have recently purchased a GT-i9505 and was wondering what the newest firmware is for my version.
I cannot move my apps to SD card and I believe I have the old firmware as
PDA: i9505XXUAMDM
CSC: i9505OXXAMDB
I have tried Kies update and it says it is latest firmware PDA: MDM, Phone: MDM, CSC: MDB (BTU)
I am in the United Kingdom, and as far as I am aware it originated here as it came with a 3 pin plug. It is also unlocked and free of branding.
Why is the new firmware MGA not on my phone or on update? How do I get it, as I am running lower on room on my phone everyday.
Thank you
jamieostrich said:
I am new at all of this. So excuse me, I have recently purchased a GT-i9505 and was wondering what the newest firmware is for my version.
I cannot move my apps to SD card and I believe I have the old firmware as
PDA: i9505XXUAMDM
CSC: i9505OXXAMDB
I have tried Kies update and it says it is latest firmware PDA: MDM, Phone: MDM, CSC: MDB (BTU)
I am in the United Kingdom, and as far as I am aware it originated here as it came with a 3 pin plug. It is also unlocked and free of branding.
Why is the new firmware MGA not on my phone or on update? How do I get it, as I am running lower on room on my phone everyday.
Thank you
Click to expand...
Click to collapse
Here bro http://www.hotfile.com/dl/235905226/e7bdf1a/I9505XXUBMGA_I9505OXXBMG3_BTU.zip.html. Flash this MGA rom with Odin. See item 1 im my signature for how to. This is the latest version atm. For moving apps you need root.
Hi all,
looking for some help.
I have a Note 3 from Germany and have run into a problem trying to load Skygo onto it. For some reason it keeps saying device not supported.
After doing some research i came to the conclusion that my phone must have a German firmware/CSC and have since Flashed (?) to a uk ROM.
I believe this was successful but Skygo still doesn't work?
Here are the details from *#1234#
AP: N9005XXUENB7
CP: N9005XXUENB1
CSC: N9005OXAENB1
Here's some additional info from "Phone info":
Country of origin: Made in Vietnam
Knox 0x0
Original CSC Code: BTU
Firmwares CSC Code: BTU
Active CSC Code: BTU
CSC Country: UK & IRE
Android version 4.4.2 KOT49H N9005XXUENB7
I'm really not that Tech savvy and i'm unsure if my ROOT was successful and if my CSC has changed?
Can anyone help?
Thanks,
Rees
I bought this Galaxy Note 3 LTE (SM-N9005) in Australia, and it came with Andorid 4.3, the original firmware was:
Product Code: VAU
PDA: N9005XXUDMJ7
CSC: N9005VAUDMJ2
MODEM: N9005XXUDMJ7
Later on, I decided to upgrade my phone to Android 4.4.2 by flashing a Singapore firmware because I couldn't wait for Australia firmware anymore, it was too slow. The Singapore firmware that I flashed was
Product Code: XSP
PDA: N9005DXUENF3
CSC: N9005OLCENF2
MODEM: N9005DXUENF1
Now that the Australia version of Android 4.4.2 firmware has eventually rolled out:
Product Code: VAU
PDA: N9005XXUENE3
CSC: N9005VAUENF1
MODEM: N9005XXUENE3
Last night I flashed this new Australia firmware and I got bootloop unfortunately, so I had to flash back to the Singapore one, I seems that I have been stucked with the Singapore firmware. Could anybody please tell me how I can flash back to Australia firmware? Thanks.
Hello to all,
Current Info: haven't flashed any other rom, only update via OTA then rooted via towelroot thanks to @geohot, knox 0x0 (installed knox v1.0.0xxuenc2):
Country: South Africa (Vodafone) - region unlock: I'm currently using here in Philippines with a local simcard without issues
Model: SM-N9005 (32gb)
Model name: GALAXY Note 3 LTE
Product Code: XFV (original)*
PDA: N9005XXUENC2 (so far this is the latest for xfv)
CSC: N9005VFGENA4 (multi csc - same with UK vod)
MODEM: N9005XXUENC2
As from the title these are the following questions:
1. Can I also use "N9005XXUFNF4_hlte_Stock_Odex_Not_Rooted_NoKnox.zip" by @mdiaz33685 to upgrade to btu NF4 over xfv NC2? taken from @sweeney_uk post http://forum.xda-developers.com/showpost.php?p=53952241&postcount=1
2. How about using official btu NF4 from sammobile.com then flash via MOP?
(It's clear to me that flashing later/latest version will not trip knox but i'm hesitant because I haven't found in the forum that flash over from exact product code of mine xfv to a different csc)
3. What are the issues using BTU NF4 in Asia?
4. What if I use official xtc NF4 firmware from sammobile.com then load in open file section via MOP, will this work without tripping knox?
I want to keep root access and knox 0x0 and unbrand my phone (i prefer to have xtc so I can receive OTA here) . As much as possible I don't want to use PC odin because some user soft bricked their phone and I think i can't revive mine via kies since it doesn't support initialization of different region csc.
Sorry for this redundant questions as I already post this to other threads. I decide to make this thread hoping to get more advice because I want to be 100% sure. Thanks in advance
Hello, Im trying to flash the ILO firmware but I have an XEO firmware currently and thats the csc that is currently installed on my phone.
Is there anywhere I can download the ILO csc because the flash fails with the XEO csc.
Thanks.
Anyone???