I currently have a Samsung Galaxy S4 (i9500) which is rooted. Plugging it into Samsung Kies shows that there's an update to the MG9 firmware available for it. I'd like to know whether it will be possible to do a backup and upgrade with the phone rooted.
If not, how safe would it be to unroot the phone via SuperSU's menu before flashing through Kies?
Lastly, if I am going to be recommended not to do either of the above, then where can I get a link to manually download the latest, original firmware as well as a working root for said firmware, for my i9500?
Thanks for the responses in advance.
.Xanadu. said:
I currently have a Samsung Galaxy S4 (i9500) which is rooted. Plugging it into Samsung Kies shows that there's an update to the MG9 firmware available for it. I'd like to know whether it will be possible to do a backup and upgrade with the phone rooted.
If not, how safe would it be to unroot the phone via SuperSU's menu before flashing through Kies?
Lastly, if I am going to be recommended not to do either of the above, then where can I get a link to manually download the latest, original firmware as well as a working root for said firmware, for my i9500?
Thanks for the responses in advance.
Click to expand...
Click to collapse
Don`t think if you`ll be able to update through Kies or OTA as you system is modified and the counter is raised. You`ll have to wait till Triangle Away will work for the I9500. Just flash the new rom with Odin and reroot afterwards.
gee2012 said:
Don`t think if you`ll be able to update through Kies or OTA as you system is modified and the counter is raised. You`ll have to wait till Triangle Away will work for the I9500. Just flash the new rom with Odin and reroot afterwards.
Click to expand...
Click to collapse
Thanks for that.
Can anyone else confirm or provide me with a link to the latest official firmware? I have searched rather quickly myself, but keep getting results for the MG5 firmware instead, which is supposedly newer than the MG9 firmware. However, Kies tells me that the latest for my device is actually MG9.
If anyone could just shed some light.
.Xanadu. said:
Thanks for that.
Can anyone else confirm or provide me with a link to the latest official firmware? I have searched rather quickly myself, but keep getting results for the MG5 firmware instead, which is supposedly newer than the MG9 firmware. However, Kies tells me that the latest for my device is actually MG9.
If anyone could just shed some light.
Click to expand...
Click to collapse
Look here www.sammobile.com/firmware/1.
gee2012 said:
Look here www.sammobile.com/firmware/1.
Click to expand...
Click to collapse
Thanks for that. Not too sure where my device originated from, so I'll have to check the documentation when I get home or something.
Also, coincidentally I stumbled upon that website about 20 minutes ago. Didn't even notice they supplied the firmware.
Thanks for that. Not too sure where my device originated from, so I'll have to check the documentation when I get home or something.
Also, coincidentally I stumbled upon that website about 20 minutes ago. Didn't even notice they supplied the firmware.
Click to expand...
Click to collapse
The i9500 variant will use any i9500 software as far as I know. You can flash the UAE firmware on an Indian i9500 and it will work fine. This goes with any country, you just need to flash using odin
@Adil Ras: You do realize the post you replied to is 1-1/2 years old, right?
Soy Noob
Strephon Alkhalikoi said:
@Adil Ras: You do realize the post you replied to is 1-1/2 years old, right?
Click to expand...
Click to collapse
Haha. This is why im a noob
Related
Hello,
I've bought S4 few days ago. Out of the box I was running with stock firmware without rooting or CWM. Yesterday I've rooted the device and flashed CWM. Few hours later I thought that I'll be better off with stock firmware and updates available on time. But here's the problem: I cannot make OTA work anymore. I've flashed AMDE, the firmware which was out of the box (I have BOOTLOADER, PDA, MODEM, CSC and pit file). I've unrooted and flashed stock recovery. Whole device is official (Status: Official, Binary: Official, Settings > About device: Official) and flash counter is reset to 0 with TriangleAway. Still, after flashing stock firmware, it OTA still says "Newest updates already installed, while this firmware is 2 months old. Out of the box installed updates just fine. CSC is set to XEO as I live in Poland. I have no idea what to do next
Thanks in advance.
tehaerpl said:
Hello,
I've bought S4 few days ago. Out of the box I was running with stock firmware without rooting or CWM. Yesterday I've rooted the device and flashed CWM. Few hours later I thought that I'll be better off with stock firmware and updates available on time. But here's the problem: I cannot make OTA work anymore. I've flashed AMDE, the firmware which was out of the box (I have BOOTLOADER, PDA, MODEM, CSC and pit file). I've unrooted and flashed stock recovery. Whole device is official (Status: Official, Binary: Official, Settings > About device: Official) and flash counter is reset to 0 with TriangleAway. Still, after flashing stock firmware, it OTA still says "Newest updates already installed, while this firmware is 2 months old. Out of the box installed updates just fine. CSC is set to XEO as I live in Poland. I have no idea what to do next
Thanks in advance.
Click to expand...
Click to collapse
Can you please add one more line of error..?? what error is coming while updating.?
BTW, you can use this thread for better service & for Quick answer.
Disturbed™ said:
Can you please add one more line of error..?? what error is coming while updating.?
Click to expand...
Click to collapse
It just checks the update and acts like I have the newest one installed. Not "System modified" or something else, just there are no updates for me like I would have AMEA/BMF8 installed already, while I have AMDE.
tehaerpl said:
It just checks the update and acts like I have the newest one installed. Not "System modified" or something else, just there are no updates for me like I would have AMEA/BMF8 installed already, while I have AMDE.
Click to expand...
Click to collapse
buddy MF8 is latest one. If OTA will be available to your country it won't say "You already have latest firmware installed".
Disturbed™ said:
buddy MF8 is latest one. If OTA will be available to your country it won't say "You already have latest firmware installed".
Click to expand...
Click to collapse
I've flashed AMDE like said earlier. But I do not receive AMEA update, which was possible when I bought the device. AMDE is way older than AMEA.
Kies also does not want to update my device. It shows my PDA: AMDE and CSC XEO but "Your device does not support update over the KIES". Everything has status "official" with flash counter 0, but acts like modified. It's annoying.
tehaerpl said:
I've flashed AMDE like said earlier. But I do not receive AMEA update, which was possible when I bought the device. AMDE is way older than AMEA.
Kies also does not want to update my device. It shows my PDA: AMDE and CSC XEO but "Your device does not support update over the KIES". Everything has status "official" with flash counter 0, but acts like modified. It's annoying.
Click to expand...
Click to collapse
In the last, I would say, please let it updated using ODIN. Download the latest firmware of your zone & flash it using ODIN.
I had this problem with an s2 ages ago. Turned out I needed to reflash stock firmware and the csc. The problem is usually a mismatch between pda/cdc/phone but its working out which is wrong. Best bet is samfirmware site. Find the latest for your region and and carrier if its branded then flash that and try again
Sent from my GT-I9505 using xda premium
tigerphil said:
I had this problem with an s2 ages ago. Turned out I needed to reflash stock firmware and the csc. The problem is usually a mismatch between pda/cdc/phone but its working out which is wrong. Best bet is samfirmware site. Find the latest for your region and and carrier if its branded then flash that and try again
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
Well, the problem is that I work at Samsung's R&D and I have full packages ready to flash but non of them fix the OTA updates, and I cannot contact the developer responsible for OTA module
Thanks anyway.
tehaerpl said:
Well, the problem is that I work at Samsung's R&D and I have full packages ready to flash but non of them fix the OTA updates, and I cannot contact the developer responsible for OTA module
Thanks anyway.
Click to expand...
Click to collapse
Today XDA achieved best one here. Samsung's R&D officials asking help for their device. No offence.
Sent from my Disturbed™ Galaxy S4
Disturbed™ said:
Today XDA achieved best one here. Samsung's R&D officials asking help for their device. No offence.
Sent from my Disturbed™ Galaxy S4
Click to expand...
Click to collapse
Happens, well thanks anyway for feedback. I'll leave the topic for now as I've already flashed newest and rooted it.
I have rooted my S4 using CF-Auto-Root.
I'm not sure if the 4.3 upgrade is available at the moment or not, but if not it should be available soon.
Is there a way to revert the rooting so that the stock android would allow me to do the upgrade ?
Would that leave me unable to root it again, or CF-Auto-Root doesn't care whether i'm running 4.2.2 or 4.3
Thanks in advance
reubenbubu said:
I have rooted my S4 using CF-Auto-Root.
I'm not sure if the 4.3 upgrade is available at the moment or not, but if not it should be available soon.
Is there a way to revert the rooting so that the stock android would allow me to do the upgrade ?
Would that leave me unable to root it again, or CF-Auto-Root doesn't care whether i'm running 4.2.2 or 4.3
Thanks in advance
Click to expand...
Click to collapse
Hi,
You should have asked before you did something that you were unsure of.
At the moment there is no way of getting completely back to stock if you customize your i9500.
The Triangle Away method of resetting your counter, does not currently work for the i9500.
So , you probably cannot return to complete stock in order to get the OTA , if and when it comes.
Your choice of ROMS is HERE
Does not look like much in the way of 4.3
reubenbubu said:
I have rooted my S4 using CF-Auto-Root.
I'm not sure if the 4.3 upgrade is available at the moment or not, but if not it should be available soon.
Is there a way to revert the rooting so that the stock android would allow me to do the upgrade ?
Would that leave me unable to root it again, or CF-Auto-Root doesn't care whether i'm running 4.2.2 or 4.3
Thanks in advance
Click to expand...
Click to collapse
malybru said:
Hi,
You should have asked before you did something that you were unsure of.
At the moment there is no way of getting completely back to stock if you customize your i9500.
The Triangle Away method of resetting your counter, does not currently work for the i9500.
So , you probably cannot return to complete stock in order to get the OTA , if and when it comes.
Your choice of ROMS is HERE
Does not look like much in the way of 4.3
Click to expand...
Click to collapse
Well i beg to differ with you Sir.
In I9500 the binary counter is hidden and that has nothing to do with OTA updates
To OP you can revert to Stock by downloading the latest STock rom and flash it via odin..
After you have flashed it VIa odin then you are pure stock and OTA updates would work like Charm
What you have done with CF-Root has only triggered the Binary counter and makes your phone out of warranty ( until the triangle away is available for i9500)
manu44 said:
Well i beg to differ with you Sir.
In I9500 the binary counter is hidden and that has nothing to do with OTA updates
To OP you can revert to Stock by downloading the latest STock rom and flash it via odin..
After you have flashed it VIa odin then you are pure stock and OTA updates would work like Charm
What you have done with CF-Root has only triggered the Binary counter and makes your phone out of warranty ( until the triangle away is available for i9500)
Click to expand...
Click to collapse
Hi,
I am only reporting what other people have reported.
It may be that you are correct as well. :good:
I do not wish bad on anyone,but some have reported no OTA possible after they rooted.
I hope that I am wrong.
manu44 said:
Well i beg to differ with you Sir.
In I9500 the binary counter is hidden and that has nothing to do with OTA updates
To OP you can revert to Stock by downloading the latest STock rom and flash it via odin..
After you have flashed it VIa odin then you are pure stock and OTA updates would work like Charm
What you have done with CF-Root has only triggered the Binary counter and makes your phone out of warranty ( until the triangle away is available for i9500)
Click to expand...
Click to collapse
Not completely true, Samsung has instructed service points to repair faulty devices under warranty even if they are rooted. This is however a ONE time courtesy, from the second time the owner has to pay to repair if the phone is rooted.
malybru said:
Hi,
I am only reporting what other people have reported.
It may be that you are correct as well. :good:
I do not wish bad on anyone,but some have reported no OTA possible after they rooted.
I hope that I am wrong.
Click to expand...
Click to collapse
Thats okay buddy..
gee2012 said:
Not completely true, Samsung has instructed service points to repair faulty devices under warranty even if they are rooted. This is however a ONE time courtesy, from the second time the owner has to pay to repair if the phone is rooted.
Click to expand...
Click to collapse
Ya, but i guess it depends on region to region..
I rooted my AT&T Galaxy S4 i337 a while back using Motochopper and it worked absolutely fine. After installing Cyanogenmod, I decided to go back to stock. I used triangle away and Odin to return myself back to stock, however, I always had issues. When I would recovery boot, I got an error and I couldn't wipe my cache partition. I tried to re-root my phone today using Motochopper and then Odin, but neither of them worked. I got a fail on both of them. Motochopper installed Supersu on my device, but didn't actually give me root access, and Odin just gave me a fail. Now, my phone is working with stock, but I still get errors in recovery mode and I can't root. Can someone please help!?
What is your baseband and build number on settings, more, about phone?
jd1639 said:
What is your baseband and build number on settings, more, about phone?
Click to expand...
Click to collapse
Baseband - I337UCUAMF3
Build Number - JDQ39.I337UCUAMF3
I
cfoughty7 said:
Baseband - I337UCUAMF3
Build Number - JDQ39.I337UCUAMF3
Click to expand...
Click to collapse
That's what i was afraid of. With mf3 you can't root with motorchopper or flash roms like you could on mdl. You also can't put on a custom recovery. Give me a second and I'll give you some links.
http://forum.xda-developers.com/showthread.php?p=44165374
http://forum.xda-developers.com/showthread.php?p=42478710
http://forum.xda-developers.com/showthread.php?p=45186518
http://forum.xda-developers.com/showthread.php?p=45971194
Read these before you do anything else and get familiar with them.
cfoughty7 said:
Baseband - I337UCUAMF3
Build Number - JDQ39.I337UCUAMF3
Click to expand...
Click to collapse
MF3 has a completely different root and recovery method now. Search the threads and you'll find them. Unfortunately it's pretty risky as you won't be able to flash back to stock using ODIN on MF3.
Sent from my Samsung Galaxy S4 (SGH-i337) via Tapatalk 4
jd1639 said:
I
That's what i was afraid of. With mf3 you can't root with motorchopper or flash roms like you could on mdl. You also can't put on a custom recovery. Give me a second and I'll give you some links.
http://forum.xda-developers.com/showthread.php?p=44165374
http://forum.xda-developers.com/showthread.php?p=42478710
http://forum.xda-developers.com/showthread.php?p=45186518
http://forum.xda-developers.com/showthread.php?p=45971194
Read these before you do anything else and get familiar with them.
Click to expand...
Click to collapse
I'm just confused as to why I was able to do it perfectly before?
cfoughty7 said:
I'm just confused as to why I was able to do it perfectly before?
Click to expand...
Click to collapse
Because you were on mdl firmware. After you Odin'd it had to have taken the ota update to mf3.
shall plyinuf
jd1639 said:
Because you were on mdl firmware. After you Odin'd it had to have taken the ota update to mf3.
Click to expand...
Click to collapse
Ohhh, ok. I understand! There's no way to get it back? Is that what I should read those links for?
cfoughty7 said:
Ohhh, ok. I understand! There's no way to get it back? Is that what I should read those links for?
Click to expand...
Click to collapse
Ok, so I read the links. Now, I'm not so much interested in rooting as I am getting my phone straight. Is there any way to get back to mdl? Will the rumored 4.3 update this month fix that? When I tried to update or recover with Samsung Kies, it said my phone wasn't compatible to recover. Does that mean I won't be able to get the update?
jd1639 said:
Because you were on mdl firmware. After you Odin'd it had to have taken the ota update to mf3.
Click to expand...
Click to collapse
Ok, so I read the links. Now, I'm not so much interested in rooting as I am getting my phone straight. Is there any way to get back to mdl? Will the rumored 4.3 update this month fix that? When I tried to update or recover with Samsung Kies, it said my phone wasn't compatible to recover. Does that mean I won't be able to get the update?
cfoughty7 said:
Ok, so I read the links. Now, I'm not so much interested in rooting as I am getting my phone straight. Is there any way to get back to mdl? Will the rumored 4.3 update this month fix that? When I tried to update or recover with Samsung Kies, it said my phone wasn't compatible to recover. Does that mean I won't be able to get the update?
Click to expand...
Click to collapse
First, there is no way to go back to mdl. Idk if you'll be able to get the 4.3 update but I would assume so since you are on the stick firmware now. But, each new update is going to make it harder to root your phone or run custom roms. So you probably need to choose whether you want to keep your phone stock and take updates if and when they come out. Or have some snooty to run custom roms and root your device and put safestrap on.
jd1639 said:
First, there is no way to go back to mdl. Idk if you'll be able to get the 4.3 update but I would assume so since you are on the stick firmware now. But, each new update is going to make it harder to root your phone or run custom roms. So you probably need to choose whether you want to keep your phone stock and take updates if and when they come out. Or have some snooty to run custom roms and root your device and put safestrap on.
Click to expand...
Click to collapse
I'm going to stay with stock. Will the mdl thing effect anything if I have an issue with warranty sterf?
Shouldn't, your stock mf3 right now.
I have owned samsung phones since the original s1 and it's always been easy to flash a stock rom using odin.whenever I had a problem with my current rom or soft bricked I just downloaded the tar odin file flashed pda in odin and went back to 100% stock. But I cannot for the love of God seem to find this easy on at&t s4. A buddy gave me his s4 to update it to latest 4.3 but cannot find any odin tars for any of the 4.3 updates..and when I find it why is it split up by recovery/bootloader etc? So my question is how do i go from 4.2.2 to 4.3 using odin, because he cannot do it via kies or ota
euklid said:
I have owned samsung phones since the original s1 and it's always been easy to flash a stock rom using odin.whenever I had a problem with my current rom or soft bricked I just downloaded the tar odin file flashed pda in odin and went back to 100% stock. But I cannot for the love of God seem to find this easy on at&t s4. A buddy gave me his s4 to update it to latest 4.3 but cannot find any odin tars for any of the 4.3 updates..and when I find it why is it split up by recovery/bootloader etc? So my question is how do i go from 4.2.2 to 4.3 using odin, because he cannot do it via kies or ota
Click to expand...
Click to collapse
There is no 4.3. First off, if he's on MDL then you should root and get recovery and use the StockUp ROM, because that way he'll get 4.3 MK2 but also be able to change ROMs to something like Cyanogemnod. If he already has MF3 then there's a nice clear thread with "UPDATE.ZIP" in the title you can find in the general section with all the information you should need.
DeadlySin9 said:
There is no 4.3. First off, if he's on MDL then you should root and get recovery and use the StockUp ROM, because that way he'll get 4.3 MK2 but also be able to change ROMs to something like Cyanogemnod. If he already has MF3 then there's a nice clear thread with "UPDATE.ZIP" in the title you can find in the general section with all the information you should need.
Click to expand...
Click to collapse
what do you mean there's no 4.3, you mean an odin image of 4.3?? thats what I meant why is it that on my t-mobile s4 they have the complete image of the stock rom, is it because att version has a locked bootloader?? I never had to mess with update.zip files ever on a samsung phone, excuse my ignorance.
euklid said:
what do you mean there's no 4.3, you mean an odin image of 4.3?? thats what I meant why is it that on my t-mobile s4 they have the complete image of the stock rom, is it because att version has a locked bootloader?? I never had to mess with update.zip files ever on a samsung phone, excuse my ignorance.
Click to expand...
Click to collapse
He told you where to look.
scott14719 said:
He told you where to look.
Click to expand...
Click to collapse
I know where to look now thanks, my originally question is why we even have to bother with update.zip instead of just flashing 1 odin file that has complete stock rom like in all other samsung phones.
euklid said:
I know where to look now thanks, my originally question is why we even have to bother with update.zip instead of just flashing 1 odin file that has complete stock rom like in all other samsung phones.
Click to expand...
Click to collapse
Locked bootloader. There is tons of informative threads about it in the general, q&a, development, original development. and developer's only sub-forums.
euklid said:
what do you mean there's no 4.3, you mean an odin image of 4.3?? thats what I meant why is it that on my t-mobile s4 they have the complete image of the stock rom, is it because att version has a locked bootloader?? I never had to mess with update.zip files ever on a samsung phone, excuse my ignorance.
Click to expand...
Click to collapse
Yes, i meant no ODIN image. There's a locked bootloader and they're trying so hard to keep us from modifying it they make it so you can only get repairs through the Samsung centers and such where they check if you tried to mod it and are supposed to not do anything to help you if you did. As scott said, you can find plenty more information around and probably better explanations than my theories.
I think the last full stock rom was I337UCUAMDL or just MDL. Since then though, each update has been just merely that, an update or patch. So there isnt a full rom of 4.3 MK2. Your best bet, which i just did yesterday, is to use Ted77USA's thread on the bricked MK2, third post in his thread. Follow this link. http://forum.xda-developers.com/showthread.php?t=2573080&nocache=1 Again pay attention to it all. Worked out very well for me and my issue. Sure it should be as easy for you.
hi guys i'm new to this site I'm after some stock firmware for my Samsung galaxy s4 GT-I9505 I've rooted my s4 and I have to unroot it so I can send it back to Samsung I live in Australia don't know if that makes a difference or not any help would be awesome thanks :laugh:
i think you can go back to stock, just download the stock firwmware which is available here (type the typical stuff before and after, I can't post links yet) samsung-updates (you will have to find you phone, region and software version) and then google how to revert root back to stock. It should be fairly easy. I actually used an austrialian stock firmware (XSA) to get my phone to recognize the LTE in my region. It worked like a charm. Afterwards I decided to root.
Hope that helps.
wfarid said:
i think you can go back to stock, just download the stock firwmware which is available here (type the typical stuff before and after, I can't post links yet) samsung-updates (you will have to find you phone, region and software version) and then google how to revert root back to stock. It should be fairly easy. I actually used an austrialian stock firmware (XSA) to get my phone to recognize the LTE in my region. It worked like a charm. Afterwards I decided to root.
Hope that helps.
Click to expand...
Click to collapse
You are right!
I would say using Odin it's the best way to go for a stock firmware and then later let Kies update it in case you don't find the latest stock firmaware
firemex said:
You are right!
I would say using Odin it's the best way to go for a stock firmware and then later let Kies update it in case you don't find the latest stock firmaware
Click to expand...
Click to collapse
thank you for your help :good: