Related
EDIT: Solution was to sit with OP5 technician which flashed my ROM to Oxygen 4.5.1. After this didn't do it, I RMA-ed it and got a new OP5.
EDIT: TL;DR: After updating OP5 to 4.5.5, It doesn't recognizes sim nor wifi, and can't rollback to 4.5.3 that did and stuck on phone setup (needs wifi). ADB devices is empty, I have Google USB Driver from SDK, Windows 10
Hello,
I just got a new OP5 today.
Opened it in the store, came with Oxygen 4.5.3 outta the box.
I putted the sim in, and I connected to the store's wifi, all was good and even had a phone call to my mother to check if the mic and speaker are working well.
Then when I got home, I upgraded the OS to 4.5.5 through the settings, where Android suggested. I'm new to OP and android (moved from iphone 5) and so if there is a right way to do it, and that's not it, I wouldn't have known.
Then, OP5 didn't recognize the sim anymore and couldn't start the wifi (switching it on wouldn't work, it would do nothing), so I tried Factory reset. Unfortunately it didn't reset the OS as well and now I'm stuck outside can't use my sim card or connect to my home wifi to setup the device.
Tried installing OP5 usb drivers (show when connecting the OP5 to PC) and press the power button and lower speaker volume together, then flush the 4.5.3 OS through USB, but it doesn't recognize ZIP folder and when I tried to unzip and send boot image (cmd->"adb sideload boot.img) it started and then failed at 0%.
Please help, the phone right now is unusable.
Tried the Factory reset through settings, but it took so long I thought it was stuck, so I did it through recovery screen.
Sounds like you got a lemon... I'd take it back and see if they'll swap it for another. Less than a week should be replaced immediatelly, at least that's been my experience here in Oz...
ultramag69 said:
Sounds like you got a lemon... I'd take it back and see if they'll swap it for another. Less than a week should be replaced immediatelly, at least that's been my experience here in Oz...
Click to expand...
Click to collapse
Why should it be replaced in less than a week? Also, isn't there a fix for adb problem so I could flash 4.3.5? Maybe a remote takeover?
Mine had 4.5.3 on it when I got it, updated to 4.5.4 then manually downloaded full rom, placed on internal memory and flashed 4.5.5 through the settings.
Had zero problems with WIFI before, during and after the update. No problems since.
Generally updating to a higher firmware version won't allow you to regress back to the lower, not sure with Oneplus as this is my first.
I'd also, if you can boot into Android go to settings nd check my IMEI numbers to see if they have been wiped (this can cause the sim to not be recognised) . If you have no IMEI then that is a BIG problem which will require an RMA unless you had backed up your efs files which from your description I doubt..
If the IMEI is OK I would download the full firmware version from here - https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-mirrors-official-oxygen-os-t3628190 - then using PC put the FULL ROM onto the internal memory then go to recovery and flash.
I'd also then unlock my bootloader(Just remember though that the phone will wipe all data after unlocking bootloader) and install TWRP - don't forget to 1st enable developer mode in settings and then allow usb debugging and OEM unlock - make a backup of the working stock rom and put it somewhere safe - home PC, in case this happens again. Best idea is to use the all-in-one tool, here - https://forum.xda-developers.com/on...l-skipsoft-android-toolkit-oneplus-5-t3625419 thankyou MSkip.
ultramag69 said:
Mine had 4.5.3 on it when I got it, updated to 4.5.4 then manually downloaded full rom, placed on internal memory and flashed 4.5.5 through the settings.
Had zero problems with WIFI before, during and after the update. No problems since.
Generally updating to a higher firmware version won't allow you to regress back to the lower, not sure with Oneplus as this is my first.
I'd also, if you can boot into Android go to settings nd check my IMEI numbers to see if they have been wiped (this can cause the sim to not be recognised) . If you have no IMEI then that is a BIG problem which will require an RMA unless you had backed up your efs files which from your description I doubt..
If the IMEI is OK I would download the full firmware version from here - https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-mirrors-official-oxygen-os-t3628190 - then using PC put the FULL ROM onto the internal memory then go to recovery and flash.
I'd also then unlock my bootloader(Just remember though that the phone will wipe all data after unlocking bootloader) and install TWRP - don't forget to 1st enable developer mode in settings and then allow usb debugging and OEM unlock - make a backup of the working stock rom and put it somewhere safe - home PC, in case this happens again. Best idea is to use the all-in-one tool, here - https://forum.xda-developers.com/on...l-skipsoft-android-toolkit-oneplus-5-t3625419 thankyou MSkip.
Click to expand...
Click to collapse
I can't pass the "Connect to Wifi" in the initial setup of the android, as it finds no wifi networks (but of course there are, when I use the sim in my iphone it works properly and there are wifi networks). So I don't know how can I get the IMEI number.
Right now my PC recognizes the OP5 connected via USB, but "adb devices" bring back empty list.
I think that once I get that working, I could unlock the bootloader. But I can't seem to be able to enable dev mode in settings - I can't get there.
I can only get to the recovery screen beyond the initial steps of setting up android.
Right now there is no important data on the phone and I have my laptop which is virgin to ADBs and Drivers (didn't use it to try to resolve it).
What driver and where do I get the right ADB so I could load 4.5.3 from usb to the phone?
When you upgraded, did you wipe cache and dalvik?
Binary Assault said:
When you upgraded, did you wipe cache and dalvik?
Click to expand...
Click to collapse
Wiped after the upgrade whem problems started
Might be wrong but I thought you could skip the wifi select screen on the setup wizard.
If you can get to Android you need to go to settings, scroll down to about phone and tap around 8 times on build number to enable developer settings.
You might be able to, might, pull down the settings menu in the wizard and bypass the wizard.
ultramag69 said:
Might be wrong but I thought you could skip the wifi select screen on the setup wizard.
If you can get to Android you need to go to settings, scroll down to about phone and tap around 8 times on build number to enable developer settings.
You might be able to, might, pull down the settings menu in the wizard and bypass the wizard.
Click to expand...
Click to collapse
It doesn't seem like I can skip it. Can't pull down a menu or anything
I guess only Oneplus can help me now?
Do you have any suggestion on fixing adb so it would recognize the OP5?
No, you need to enable debugging in developer settings for ADB to recognise.
Time to RMA...
ultramag69 said:
No, you need to enable debugging in developer settings for ADB to recognise.
Time to RMA...
Click to expand...
Click to collapse
Welp it is a pickle.
Going to go live chat with OP "level 2" representative.
See if they wipe the phone out and restore an older ROM.
If that't not going to work, RMA it is :/
Shame. A new phone. Took only one picture with my dad when we opened it back at the store. nothing else.
Unfortunately bad things can happen... You just got to be the one who got the dud this time round.....
Here's hoping it's the last time....
you can force update to a fresh installation of 4.5.5 by putting the 4.5.5 full zip into your phone in a folder called "update". Reboot to recovery im assuming you have stock recovery and follow the steps until you find the option that says something along the lines of "Update manually". It will detect if you have an update folder stored on your phone and it will begin reinstalling OOS 4.5.5. It sounds like a software problem but could be a hardware problem. Rule out the first option before RMA the latter.
OcazPrime said:
you can force update to a fresh installation of 4.5.5 by putting the 4.5.5 full zip into your phone in a folder called "update". Reboot to recovery im assuming you have stock recovery and follow the steps until you find the option that says something along the lines of "Update manually". It will detect if you have an update folder stored on your phone and it will begin reinstalling OOS 4.5.5. It sounds like a software problem but could be a hardware problem. Rule out the first option before RMA the latter.
Click to expand...
Click to collapse
When I connect the OP5 to the PC there are no folders under it (Computer -> OP A500 -> no folders), but I'll try and give it a shot. see what happens. Will update this reply.
Update:
After Oneplus flashed Oxygen 4.5.1 on the phone and some other magic I was able to skip wifi step on setup, yet still when I try to activate it it won't budge. the slider won't move and it looks as the page is being refreshed. Also, when I try to get into sim section in settings it would just freeze and alert the program stopped and suggest to close or wait.
Oneplus says it is hardware issue, and the fact it happened when I upgraded to 4.5.5 from settings menus is coincidence. They say I need RMA it.
If anyone knows how to fix it then I'm more than welcome to hear it.
EDIT: it also won't shut off unless I long press the power button.
Hello experts!
First off I do admit I have cross posted some information here. Perhaps I should have just asked here first. As a lot of research I have been doing lead me here. I am also aware of the XY problem. So I am giving what information I have on my problem and what I have done to resolve it. In a nutshell I need to recover app data from internal storage.
So here is yet another story of a dropped Samsung Galaxy BSOD. The broken screen of death! :-o
So I dropped my phone and the screen broke, fixed it then put on a screen protector that fractured the new screen in my pocket, of all things. Through that it spiraled out and it needed a new LCD as well as screen which failed to repair as LCD remains blank now. I suspect the display controller has somehow fried. Decided to give up and buy a new phone.
My broken phone is a Core Prime G360G. The digitizer doesn't respond. The LCD is blank. The side buttons, volume, power and home, work fine.
The good news. It turns on and technically still works. It has no screen lock. I can plug it in to computer via USB and it mounts over MTP. I can also install apps remotely (so to speak) from another computer from the Play site. I've installed Samsung Switch this way. Switch does work and I managed to back up files from the Windows program which is good but in my case it isn't smart enough as it doesn't back up app data which I need. I also have AirDroid installed and can reach it that way I but didn't enable mirroring before the incident. Trying to use that to download an app (~10MB in my case) just results in the browser stalling.
The bad news. It is not rooted. It has stock standard firmware. USB debugging is not enabled. Last time I tested OTG wasn't supported. At least not for OTG USB sticks.
So in effect it's rooted without being rooted! Yes, i know, I know, Android rule of thumb; before you accidentally drop your phone, even without planning it, and not being a seer, enable USB debugging for no apparent reason! It all makes sense now.
I've spent the last two weeks reading forums all over the place, blogs and watching videos about how to recover data with a broken screen. And in almost all cases they tell you to enable USB debugging. Well that's nice advice and about as useful as advising someone with a broken toilet to sit down, do their business and then flush it! And is met with equally crappy commentary pointing the conundrum out.
My computer has Windows (Vista) and Linux (Mint 64). I read all about ADB and installed this on both Windows and Linux. And tried to talk to it that way with adb and fastboot which failed. I then read of Samsung devices being different, with a download mode, and using this Odin or Heimdall program. So I could "see" the process I tested with my new phone (a J5 Prime as it happens) and learned I needed to use download mode and how to enter it on boot. Recovery mode didn't work as expected. Heimdall was the only program that would work. I managed to view the PIT on my J5. Odin did see my phone but I found the interface harder to work with at first.
I tried on my Core. Blindly got it into download mode. Heimdall could see it. But the transport was buggy as I kept getting USB errors. I ended up removing it then compiling Heimdall v1.4.2 from source. This worked better, even though it was giving empty bulk transfer warnings, but it managed to download the PIT file. So at this point I can blindly get my Core into download mode and am able to communicate with it using Heimdall.
This is where I am at. I would prefer it if a screen mirroring app could be installed that would load up and activate remotely when a client run on my computer is loaded up. I don't care if it is VNC or how it connects. But it would need to load itself up on the phone and work without needing intervention on the phone and without USB debugging. If there is an emergency mirroring app on the Play store or even an APK that can be installed remotely, using AirDroid or any other means, I would be happy to test it. I'd write one myself if knew how to write an app! LOL.
If USB debugging could be enabled by any remote means then I am welcome to hear how. It opens a window to possibility. But a window that is hard to open if it's locked.
So I would prefer to keep this at the app level if possible. Since apps can help. But if need be as long as it doesn't destroy data I am willing to install a custom recovery image. It looks like I will need to do this as I have exhausted all other possibilities. At least, when I read of the latest broken screen mirroring app, there is always a catch of it needing debugging or activating on the phone.
Although there is support for other Core Prime variants, support for my specific G360G model seems to be lacking. The information I read looks vague at best. I read about CWM and TWRP. But on the TWRP site, although there is Core Prime images, nothing is listed for exactly a G360G. There is no point to me flashing TWRP recover image only to find it doesn't work and I have bricked recovery mode. I'd look like a right twerp!
So guys, after all the info I have given you, what's the next step? Thanks.
Okay so just an update here. I have some good news and bad news on my part. I've been hacking around with customising recovery and modifying compatible recovery images in order to get debugging activated.
The good news is I got USB debugging enabled. The bad news is my computer is unauthorised.
I'm stuck at this point. I updated the adb_keys file with what was on my computer and it won't budge. I finally get somewhere and now I've once again hit a wall. This is just so annoying. :-x
The final countdown. After months of cracking and hacking I've broken in! I modded my hack to create the needed folder just to be sure and updated my RSA key. Applied the firmware patch and let it reboot. Even while booting I knew something was different. The digitizer started responding to my touch and making water noises. Which was strange as I never noticed it doing that before.
I issued an adb command and it was accepted. I could then browse around the system. I already had screen mirroring software installed and all it needed was USB debugging working and suddenly it worked. This was a blessing as I found that trying to do other things like going into a root shell or do an adb backup caused a requester to come up on screen. Had I not been able to satisfy that on a virtual screen I would have run into the same trap of circles I had just climbed out of. Having a rooted phone with no root access.
I was then able to install a backup app and extract the data out. Hooray! I had actually installed it from Google Play site remotely but found there was no space for it and it had failed. But the account said it was installed. With a view to a mobile I could then remove another app and install it from Play on the phone itself. Given how well this worked once I learned what was needed to be done I suppose I should make up a guide. An automated script to create an ADB patch wouldn't go far astray.
Hi all,
I'm just about at my wits end here. I have a Note 4 (N910W8) with a failed USB connection and I would really like to root it. The underlying goal is to remove/disable all samsung bloatware.
WRT the USB, I have tried adjusting developer options, *#0808#, updating drivers, changing cables, changing PC's, etc. I've tried everything I could find online. Recently, I took it to a local shop and learned that the problem is not with the USB port/board, but the motherboard itself. I'm not going to pay to replace it. I have googled far and wide. As far as I can tell, this phone will never again connect to a PC via USB. So, download mode and Odin are out.
I have tried TowelRoot, KingoRoot, and other apk's, but I am on Android 6.0.1 (MMB29M/GLW-N910W8VLS1DPK1) so all of these exploits have been patched.
I am able to boot into (stock) recovery mode, so I thought I'd try recovering via SD card, however that doesn't work either. First I get a loading screen of the mascot with a spinning wireframe polygon in his belly and the message "installing system update". Then after ~15 seconds, the mascot is on his back with a red warning symbol over his belly, and the text "No Command." is displayed. I'm not sure what that's all about, because I have the latest update installed.
Any attempts to install CF-Autoroot or another recovery firmware (ie https://samsung-firmware.org/model/SM-N910W8/region/GLW/ , or https://forum.xda-developers.com/note-4/snapdragon-dev/trltecan-n910w8-aoa1-stock-rooted-t3025538, etc) from SD (in recovery mode) have been met with the same error messages:
E:footer is wrong
E:signature verification failed
I'm not sure why because at least some of these recovery firmwares claim to be official builds. Granted, they are older versions (downgrades), but are signed nonetheless.
I have tried installing TWRP or CWM so I can disable signature verification, but AFAIK the device must already be rooted to install these (which seems like a bizarre catch-22, but maybe I'm confused) so that's a no-go.
It certainly feels like I have explored every possible avenue, but I have one remaining idea. Perhaps if the phone doesn't want to downgrade, I could force its hand by carefully soft-bricking the current rom in a controlled manner, then performing a recovery from SD with an official 4.4.4 KitKat build, and finally, using the towelroot/kingoroot/etc exploit to gain root access.
I mean, why else would there be a recover-from-SD option in the stock recovery menu? There must be a way to get it to accept a recovery build...
It's a last resort. But I'm willing to try it. The phone boots up, but is so bloated and laggy that it's practically unusable. Still. Am I missing anything? Surely there's some way to skip the USB / Odin method. What do you guys think? Is it time to go hulk on this thing? Is there any hope left? Curious to see how much further this rabbithole can go.
Cheers and thanks guys.
I've searched for ways to soft-brick, but have not come across anything. The bootloader appears to be locked, which is odd because I thought that only applied to Verizon variants.
I have recently downloaded an ADB/fastboot package for windows so I could attempt ADB over WiFi, however I can't establish a connection. I thought I'd do some more poking around on the phone side, so I installed some Wireless ADB apps. They all indicate a root is required, so I think that might be a dead end. I also connected to a ubuntu machine. Nothing. The phone charges, but both the PC and Ubuntu machine show zero signs of any connection at all.
There has to be some kind of SD-based solution to this. You can boot a computer from an SD card / USB stick and use that to access files (on an unencryped partition), and I'd be happy to do that here and delete those bloatware APK's directly... but I guess phones don't behave like other computers.
I've picked all the low hanging fruit. A part of me believes that there are some sneaky hacker ways to get at this without USB (ie some sort of rootkit) but that's way beyond my abilities. I'm going to take a break and attack this again once I have fresh ideas.
I'm in the same boat (busted usb port), does your phone still fast charge? Mine stopped fast charging.
I too have the same problem, except with the Note 10.1 2014. I know that is a different forum, but if you find a solution, it might be adaptable to my problem. I too have exhausted all other options as described above. Please someone, there must be a way to root via SD card instead of Odin. Help us please!
Me too. I have a Note Pro 12.1 running Lollipop. USB is busted and I've already replaced the port and ribbon, so it must be the motherboard. I mainly need it for Titanium backup, so I don't have to reinstall large games over my limited connection.
I have the same problem. Note 4 N910H. Not recognized by pc, stopped fast charging shows usb charging in battery settings. AFAIK I just re-rooted the phone before it went bust. There is no solution except changing the motherboard. Also this problem seems to be quite common.
Hello guys,
I want to unlock my bootloader and have tried everything I could find on all the threads, but nothing has helped.
1. Connected my device to my account (which already has unlock permissions from my previous phone).
2. Waited a week.
3. Tried.
4. Tried using previous versions of the unlock tool. Sometimes it gets stuck at 50%, but spamming it gets it past 50% and goes to 99%.
After that, I get the error in chinese a few times, and then I get the error that the device isn't liked to my account (though it is, and in some cases, it's been for over a week).
5. I've tried removing my account, adding it again, and waiting. No luck. I never received the error "you have to wait XXX hours".
Now, every time it gets past 50%, it gets to 99% but it gives me the Chinese errors a few times, and then the "account not linked to device" error.
6. I've tried three different versions of the unlock tool.
7. I've tried it with the fingerprint and password enabled, and disabled.
8. I've tried with "Locate device" on, and "Locate device" off, too. No difference.
9. I've tried different ports, including USB 2.0 ports, no luck.
10. Always used the original cable that came with the phone.
I'm on Global Stable ROM for Lavender. I can't seem to get a hold of the Chinese dev rom. My main aim is to eventually flash Xiaomi.eu because I had really good experiences with their ROMs on my RN4 MTK, but alas, no luck. Even if I can get it rooted, I can at least remove some of the apps I don't want, or if I can't do that, at least I can install an adblocker.
Any and all help is appreciated.
To anyone having this problem: I was using a Windows 10 64-bit system.
As soon as I tried it on my wife's Win 7 64-bit system, it worked the first time.
Bootloader unlocked now!
rottensong said:
To anyone having this problem: I was using a Windows 10 64-bit system.
As soon as I tried it on my wife's Win 7 64-bit system, it worked the first time.
Bootloader unlocked now!
Click to expand...
Click to collapse
Nice to hear that. By the way,
How many hours do you get for unlocking the bootloader?
Hey! This is my first time here, sorry if I'm doing smth wrong, I just really need help. My fossil gen 6 is kinda useless at this point after updating to Wear OS 3 and I would like to flash it back to Wear OS 2, since I don't get any notifications & I can't even sync my notes at this point without connecting to wifi (not even through mobile data, which is pretty annoying -> my phone & watch doesn't connect to each other through bluetooth)
thanks, for any guides in advance!
night
You will have to perform a factory reset and repair the watch and phone again. Only option at the moment.
edwin270 said:
You will have to perform a factory reset and repair the watch and phone again. Only option at the moment.
Click to expand...
Click to collapse
Did that 3 times already, nothing changed. Thanks for your answer though!
Did you get anywhere with this? I also want to go back to wear os 2. I hate the fossil app
I'd like to know too. I just came back to Android with the S23 Ultra and wanted to pair my Razer x Fossil watch to it. But I decided to update since I was doing a factory reset/disconnect anyways. Big big BIG mistake.
There has to be a way to flash wear OS 2.3 back to the watch and re partition it as stock. I'm able to see my watch as a USB perhp on my machine without BT or wifi connection.
Anyone have the old firmware for these watches? Short of buying another Razer watch for $600
I do have all the required files to go back to wearOS 2, but wont suggest it might brick your device. Have a partition backup first.
For OTA add the hash in the placeholder.
Main URL: https://redirector.gvt1.com/packages/data/ota-api/package/<hash_with_extension_here>
v2.30: 230d380c72f87f94cbd4e43b944afd70700d6ffd.zip (Apply updates from playstore regarding wearOS to get it upto 2.38)
Minor Update: 4e201fee66e76ed4694e77eaa589f7767f93beea needs to applied after flashing the above package.
V3: a569fe07dfdcb4edea85f9535d592b9af4621cd1.zip
Malvik said:
I do have all the required files to go back to wearOS 2, but wont suggest it might brick your device. Have a partition backup first.
For OTA add the hash in the placeholder.
Main URL: https://redirector.gvt1.com/packages/data/ota-api/package/<hash_with_extension_here>
v2.30: 230d380c72f87f94cbd4e43b944afd70700d6ffd.zip (Apply updates from playstore regarding wearOS to get it upto 2.38)
Minor Update: 4e201fee66e76ed4694e77eaa589f7767f93beea needs to applied after flashing the above package.
V3: a569fe07dfdcb4edea85f9535d592b9af4621cd1.zip
Click to expand...
Click to collapse
Hey ! Thanks for the file. I'll take the risk to brick my watch.
Do you know how I can flash the archive ?
MiamKebab said:
Hey ! Thanks for the file. I'll take the risk to brick my watch.
Do you know how I can flash the archive ?
Click to expand...
Click to collapse
I'm also looking to be able to flash my watch between WearOS 2 and 3. Have you figured anything out by chance? All the things I normally do aren't working, with and without TWRP.
Malvik said:
I do have all the required files to go back to wearOS 2, but wont suggest it might brick your device. Have a partition backup first.
For OTA add the hash in the placeholder.
Main URL: https://redirector.gvt1.com/packages/data/ota-api/package/<hash_with_extension_here>
v2.30: 230d380c72f87f94cbd4e43b944afd70700d6ffd.zip (Apply updates from playstore regarding wearOS to get it upto 2.38)
Minor Update: 4e201fee66e76ed4694e77eaa589f7767f93beea needs to applied after flashing the above package.
V3: a569fe07dfdcb4edea85f9535d592b9af4621cd1.zip
Click to expand...
Click to collapse
Or would you be able to provide some guidance on how to proceed?
Arkbird1000 said:
I'm also looking to be able to flash my watch between WearOS 2 and 3. Have you figured anything out by chance? All the things I normally do aren't working, with and without TWRP.
Click to expand...
Click to collapse
From what I found, the original cable with 4 spins (2 on each side) should be used to connect your watch to a PC and use the USB debugging.
So I bought one but nothing happened. I'm just able to use Bluetooth or WiFi debugging and these can't be used to unlock the bootloader as WiFi and Bluetooth are disabled on bootloader mode. So fastboot can't detect the watch.
So I'm stuck and that sucks, my duck.
Another way is to remove the watch's back and tweak the USB connectors but I'll not do that...
MiamKebab said:
From what I found, the original cable with 4 spins (2 on each side) should be used to connect your watch to a PC and use the USB debugging.
So I bought one but nothing happened. I'm just able to use Bluetooth or WiFi debugging and these can't be used to unlock the bootloader as WiFi and Bluetooth are disabled on bootloader mode. So fastboot can't detect the watch.
So I'm stuck and that sucks, my duck.
Another way is to remove the watch's back and tweak the USB connectors but I'll not do that...
Click to expand...
Click to collapse
I see. I have been able to make it farther, but I also was running into problems getting the USB connection to work. Most of what I did was under Linux instead of Windows but I found that after enabling USB debugging I often had to remove the watch from the cradle, put it back on, then run 'adb devices' from the connected computer to get the daemon going. That usually got the adb popup on the watch to show, then I can select the 'always allow' option.
All that said, at the moment I'm not currently able to boot my watch unless I have the bootloader unlocked. I have restored the stock recovery after using TWRP and unsuccessfully flashing anything via that adb shell or from the bootloader with fastboot. Even worse, some things are not working properly, such as automatic brightness and some of the wireless capabilities. I might need to see if I can work something out with Fossil if I'm unable to resolve these issues.
You guys seems way ahead on me in the downgrade process...
I made Wear OS 3 update but the Fossil app used to pair the watch won't work with Oneplus 8 Pro (Android 13), gotta go back but i have no idea how...
Yet i flashed a lot of custom roms and stuff in the past, but now.. kinda lost
Im looking forward to see news here
Good luck guys, i'll keep updated if i somehow manage to flash the OTA posted ahead
Edit : well i was on Apkmirror to try an older apk of the app, and found out their app targets android 12 but not android 13..........
Arkbird1000 said:
I see. I have been able to make it farther, but I also was running into problems getting the USB connection to work. Most of what I did was under Linux instead of Windows but I found that after enabling USB debugging I often had to remove the watch from the cradle, put it back on, then run 'adb devices' from the connected computer to get the daemon going. That usually got the adb popup on the watch to show, then I can select the 'always allow' option.
All that said, at the moment I'm not currently able to boot my watch unless I have the bootloader unlocked. I have restored the stock recovery after using TWRP and unsuccessfully flashing anything via that adb shell or from the bootloader with fastboot. Even worse, some things are not working properly, such as automatic brightness and some of the wireless capabilities. I might need to see if I can work something out with Fossil if I'm unable to resolve these issues.
Click to expand...
Click to collapse
I do have the TWRP but need to find it, took some tweaks from Ticwatch 3 pro. I didnt pushed it on the repo tho. I didnt what made me do it, but I wiped my system partitions and had to rebuilt from the OTA only. But after getting the watch working again, I had few functionalities broke, including the OTA updates. If you can social enginner your way thru fossil to get files such as stock rom and other files for qualcomm software like rawprogrammer and firehose files it can be great help.