I've looked around for anything on this and cannot find anything that helps me.
I have a Netgear Wireless N-300 USB Adapter WNA3100 and a Galaxy S4 with a 4.2.2 Google Edition Rom (Rooted)
I was wondering there were any drivers or anything to use this thing with my device, for doing things such as monitor mode on WiFi networks with BT5.
Thank you.
Related
can i use Wireless USB Adapter on my acer A500?
a500 already has wifi, if you want to find out just plug one in. Probably not though, unless drivers are available for it. Almost every tablet has wifi capability so not too sure if anyone's bothered with USB wifi adapter drivers.
I would like to use other wifi the adapter, for more best communication quality
Greetings. I have a desktop PC with no WiFi. I am trying to use the Nexus 7 like a USB WiFi dongle for a temporary internet access. Does anyone know if this can be done? My N7 is stock, no root. But I'd be willing to root if necessary.
Thanks
Possible...
Not 100% sure on this, but if you get a micro USB to OTG adapter, and then a USB to Ethernet adapter, run a wireless hotspot, and change your settings to allow others to connect through that Wi-Fi connection.
Just an idea, give it a go.
Hi all,
Anyone know if its possible to use a Galaxy Tab 2 with a USB dongle?
Want to try connect it so can use a dongle to get internet.
Found an adapter that will give the USB port but not sure if it will work with the dongle.
Thanks
I tryed on JB and CM9, no luck...
Pyntux said:
I tryed on JB and CM9, no luck...
Click to expand...
Click to collapse
No. The USB adapter can only connect pen drives but cannot access internet. I had to buy a portable Wifi router (Rs. 1190 in INDIA). Its a small router (size of a dongle) with a battery of about 4 hours. Using that to transmit the internet to tab through Wifi.
Is there any chance to use some custom rom on tab 5110 and after that to use usb 3g modem?
hi all, can someone please help out there that might help me deal with my situation.
I have a Pionner AVH-4100 NEX and am trying to get the AppRadio working between my Samsung S4 (Virgin Mobile CA SGH-I337M) running Version 5.0.1
I have rooted the phone and downloaded ARUR from Google Playstore and briefly tried it out but nothing was working any differently (as in not at all) than the then stock Pioneer Appradio, so i de-installed it.
I don't know if I'm doing something wrong, not following the right steps or missing a piece. But I would thought that something would have changed on the HU with ARUR.
Connection settings are Other, HDMI. I am connected with HDMI cable to Samsung HDMI Adapter (et-h10fauwesta).
I have tried plugging the cable and adapter into my HDTV and get mirroring on the TV so I know the cable and adapter work.
I am in need of some ideas or steps I may have overlooked.
thanks
Hello all,
My Fire HD 10 is my main device and so I use it alot.
Recently, I connected my DUALSHOCK4 controller to it via Bluetooth, and the Internet down/upload speeds went horrendosly slow. But when I disconnected, the speeds went back to 40/25mb/s respectively. Anyone know a workaround? Oh, and I am aware of OTG. We have an OTG cable, somewhere.
Hi,
Sounds like you have a 2.4GHz Wireless Access Point, Unfortunately Bluetooth also uses the very same 2.4GHz therefore interfering with each other. Some wireless access points have a co-exist with bluetooth function but to be honest you would be better off either getting a 5GHz Wireless Access Point or using the OTG cable (if it is compatible with your controller).
Hope that helps.
Rikski
Thanks for the answer,
found a cheap 80p (about 95cent) OTG cable & ordered it, the DUALSHOCK4 works via OTG so all should be fine.