hey guys,
need some help on this. my gf bought a sgs4 with her kingston 16gb class 4 microsd card. she put into her sgs4 but its shows blank sd card with unsupported files. i tried using the microsd card on my sgs3 and also on com via card reader, it can be used without a problem
tried formatting the card but it's not helping
i tried using my own microsd card from s3 and put to her sgs4 and it's working
anyway she's running on stock rom
anyone able to advice on this? help needed
Try to format it in the S4.
However i don't recommend anything less than class 10 microsd card in S4.
Its just not a good idea.
Dean-xXx said:
Try to format it in the S4.
However i don't recommend anything less than class 10 microsd card in S4.
Its just not a good idea.
Click to expand...
Click to collapse
Hmm bro, we try formatting it on the phone but it still doesn't work. I guess only solution is to get a new class 10 card
alvinkh said:
Hmm bro, we try formatting it on the phone but it still doesn't work. I guess only solution is to get a new class 10 card
Click to expand...
Click to collapse
I think that's the best solution
Rubbish.
I use a class 6 card (32 GB) without any problems. Did you try any other card in her phone?
I got a class 10 Samsung 32GB card on the way.
Better work!
robogo1982 said:
Rubbish.
I use a class 6 card (32 GB) without any problems. Did you try any other card in her phone?
Click to expand...
Click to collapse
Bro I tried put a class 4 samsung 1gb microsd to her phone. It works.. only her 33gb not working
Sent from my GT-I9300 using Tapatalk 2
Related
Hey guys!
I have a question about flashing with SD-Card:
Do I have to use 1GB/2GB Cards which are none "SDHC" cards?
Or does our Blackstone support High Capacitiy in Bootloader Mode?
greetz
playdo
I flashed mine using the 8GB card that came with the phone. I would of thought as long as the phone can read the memory card you'll be able to flash from it.
Ok, if you did it with the 8GB card then it should work. Thanks
I would of thought as long as the phone can read the memory card you'll be able to flash from it.
Click to expand...
Click to collapse
That's wrong, as far as I know. My old device was a Hermes which I could NOT flash with SDHC cards. But it was also able to read SDHC cards like my 4GB SDHC card.
That's why I asked
i tried with 2 different 8gb cards one of which came with the phone and both didnt work ,
but my 2gb and 16gb both work
AltF4me said:
I flashed mine using the 8GB card that came with the phone. I would of thought as long as the phone can read the memory card you'll be able to flash from it.
Click to expand...
Click to collapse
I can confirm this too - and I nearly always flash my HTC's from the card.
But you need make sure that card is first formatted to the correct FAT (cant remember which now, its in the Wiki), and obviously that the phone can see the card. Then all should work fine!
LoopyLoo
Hello,
I use a Sandisk 8GB micro SDHC card in my Tattoo. The first problem is that the card is not always recognized. After a reboot it works mostly fine again. The second problem is that i lost sometimes all my data on the card without any reason, it is just gone in a moment, I have already formatted the card in my PC but without any success. It is also not possible to do a format in my Tattoo (not working). Any suggestions how to handle with this? Thanks a lot, Mark
try formating the card i have the same card and it works sharply.. (format twice. )
Oops
I was thinking about buying this card... But now I think I won't risk :\
marvon10 said:
Hello,
I use a Sandisk 8GB micro SDHC card in my Tattoo. The first problem is that the card is not always recognized. After a reboot it works mostly fine again. The second problem is that i lost sometimes all my data on the card without any reason, it is just gone in a moment, I have already formatted the card in my PC but without any success. It is also not possible to do a format in my Tattoo (not working). Any suggestions how to handle with this? Thanks a lot, Mark
Click to expand...
Click to collapse
I have the same problem only my card is sandisk 4gb
Vieira said:
I was thinking about buying this card... But now I think I won't risk :\
Click to expand...
Click to collapse
it will works fine here so think twice
I have the same problem only my card is kingstom 8gb class4
Try to format it with SD format tool: http://www.sdcard.org/consumers/formatter/
SD card problem
I have Kingston 4 GB class 4 card
same problem data deleting automatically specially pictures
I assuming this problem arises gold card transformation
I have change back original hex data but card problem not fixed
anyone help ?
BUT THIS SECTION FOR TATTOO GENERAL POST SHOULD MOVE TO ACCESSORIES
laughingcavalier said:
I've had this problem with my 8gb sandisk card too, but with froyo NFinity - had to format it the first time, and it was fine for a couple of days, then yesterday it came up with "Preparing SD Card", then "SD Card safe to remove" then "SDcard blank or has unsupported filesystem" in the notifications blind. Never had anything other than a FAT partition, and when I try to fomat it (on the phone, in Windows, in Linux) I can't. :/ I think my 4gb card was fine, but a bit scared to check now!
Click to expand...
Click to collapse
and ser1993 has had the same problem.
(see nifinity gb thread)
I had the same problem with the same SD. Then I changed it for one of 4GB and then no more problems.
devdevdev said:
Try to format it with SD format tool: http://www.sdcard.org/consumers/formatter/
Click to expand...
Click to collapse
This software works fine for me
anyone have SD problem try this software it will be correct
Thanks devdevdev
Hey guys,
I have been running Android on my HD2 for a few months now using the stock 16gb class 2 and had no real issues. I purchased a Patriot 8gb class 4 to replace the stock because I need it for another device.
I have tried formating it 32kb and 64kb, default allocation size and nothing has worked. After transfering the android files and running haret a few minutes later I get stuck on the boot screen. I tried a fresh install of various android builds and keep having the same problem.
Can someone tell me the correct way to prep this card for my HD2 to run android? Maybe a utility or something.
Link to the card's product page: http://www.patriotmem.com/products/detailp.jsp?prodline=4&catid=16&prodgroupid=78&id=730&type=15
Thanks
Give SD Formatter a try in quick format mode.
http://www.sdcard.org/consumers/formatter_3/
It formats FAT32 with 32kb sectors, and has worked well here with multiple class and size MircoSDHC cards. That said, 16GB Sandisk cards are cheap now. Maybe consider picking up another one and ditching the Patriot, if SD Formatter does not fix it up.
Best to all,
R
rhacy said:
. Maybe consider picking up another one and ditching the Patriot.
R
Click to expand...
Click to collapse
X2 on this... Not all sd cards work well...
Thanks, will try.
tantrum829 said:
Thanks, will try.
Click to expand...
Click to collapse
I'm sorry for you... That card is a junk! I also have that one and after many hours of frustrations end up buying sandisk 8gb class 4 for $15usd.
I have done all suggested ways to prep that card. If ever you will be able to boot, expect for minutes of lags.
I would recommend what has been said before, just re-format the SD Card.
Hey i got a htc hd2 and i bought a new 32gb sd-card but it my phone doens't read it. I can read it on my pc and i did format it (fat32) and i also format my phone and nothing helped.
Anyone got any solutions?
Any1 that can help me? :/
depends
Guvje said:
Hey i got a htc hd2 and i bought a new 32gb sd-card but it my phone doens't read it. I can read it on my pc and i did format it (fat32) and i also format my phone and nothing helped.
Anyone got any solutions?
Click to expand...
Click to collapse
Hi, what class is your card ?
I have a 32Go class 4 sandisk and it works just fine, some people seem to have problems with class 2 and class 10.
eskargoz said:
Hi, what class is your card ?
I have a 32Go class 4 sandisk and it works just fine, some people seem to have problems with class 2 and class 10.
Click to expand...
Click to collapse
I got a 32GB micro sd HC (dunno what hc stands for i think its the brand) class 4.
Guvje said:
I got a 32GB micro sd HC (dunno what hc stands for i think its the brand) class 4.
Click to expand...
Click to collapse
I had this pb with it after using WP7, I don't know how but changing my bootloader from Maglrd to Clk made it work again on the device.
Try formatting it with SD Formatter 3.1. It solved my problems. Set the options to format type FULL(overwrite) and format size adjustment to on.
Hello!
I just bought a Sandisk 16 class10 card and put it in my S4.
It didn't take the card before a boot though I am using PAC rom.
I tried SD tool app on the phone itself and gave me about 8.5mb/s
On PC I used h2testw and got a ridiculous 7.7mb/s
Now I don't what's the problem.
Should I format the card into a specific format or PAC rom is slowing the USB in a way?
I noticed USB transfer files is slower with PAC
vegetaleb said:
Hello!
I just bought a Sandisk 16 class10 card and put it in my S4.
It didn't take the card before a boot though I am using PAC rom.
I tried SD tool app on the phone itself and gave me about 8.5mb/s
On PC I used h2testw and got a ridiculous 7.7mb/s
Now I don't what's the problem.
Should I format the card into a specific format or PAC rom is slowing the USB in a way?
I noticed USB transfer files is slower with PAC
Click to expand...
Click to collapse
Thats really weird... I have a Class 6 lexar 8gb micro SD card and get about 15-17MB/s and on rare occasions 10MB/s you might have a faulty SD card though because a Class 10 should get in the mid-high 20's easily
crzykiller said:
Thats really weird... I have a Class 6 lexar 8gb micro SD card and get about 15-17MB/s and on rare occasions 10MB/s you might have a faulty SD card though because a Class 10 should get in the mid-high 20's easily
Click to expand...
Click to collapse
I formatted it in windows 8 as exfat, tried it again with the SD Tool app and got 22mb/s but when transferring files from PC to the phone it stays between 6 and 7mb/s.
It could be PAC rom messing with USB so I will flash TW 4.3 rom (Goldeneye) to see if it will change something.
It took me 2mins to transfer the 950mb of the rom while in the HTC One days it would have take 20sec...
Report on Echoe rom before flashing the new modem:
Using 400mb test file with H2testw Writing speed: 6.67mb/s and Reading speed : 19mb/s
Weird thing is that it starts first 4 secs with high 22mb/s then drop to 6!!
Dunno if new modem will change something
Could this card be a fake?
Looks like a Class 4 disguised in 10.
Tested speed of the card using the adapter on 2 different PCs and got 9.5mb/s.
Thanks God I have a warranty from the official Sandisk dealer,so I tell them I get between 6 to 10mb/s max while I should have the double.
I will try to format the card one last time before asking for a replacement just to double check