E615 Bricked :( - Optimus L3, L5, L7 Q&A, Help & Troubleshooting

Hi xda, i really need help.
Today, I rooted my LG E615f and installed clockwork also.
Then tried to install an oficial actualization, and when the phone restarted it went into clockworck recovery. When I restarted the phone, it always enter recovery mode.
After reading a little, Figured it was because the archive recovery.img was damaged so I tried 2 solutions.
First I tried to enter emergency mode with my phone, and couldn do it, I tried a hundred times to press Volumen buttons and the POWER button at the same time but nothing happened, it didnt work.
Then, using AIO FLASHER TOOL, I rebooted in fastboot mode and flashed the archive Recovery.img following a guide, but instead of working, now my phone is worst. Every time I turn it on, it freezes at "LG" logo, now it doesnt enter recovery mode.
Please can any one help me? Im really sad about it
Sorry for my bad english, and thanks

I use official LGMobile Support Tool and make emergency flash with IMEI when if my L5 bricked or hard-bricked.
Clean solution. :good: I don't know other any solution.

Turn off your phone. Press 'Volume -' button and plug in the USB cable. It should enter in Download/Emergency mode.

Related

[Q] Unbricking Zte Blade 3

First of all thanks for not caring. I spend days on Internet trying to find a solution. I have Blade which I bricked thanks to my noob skills with flashing and similiar ****. I just want my normal phone back. Couldn't give a **** bout roms anymore. Sorry for the lang but Im mad. When I boot it up it just sits there on green android logo not going past. I can enter download mode if it matters. As soon as I back it up Im getting rid of cwm mode and bull****. I use my sister phone to transfer files on my sd card. I cant enter my recovery mode since I installed that **** of cwm.When I try the key combo-android logo stuck with red light on. My phone has 90-100% battery Im sure. I need a solution where I can do something from pc with download mode or something that will automatecly start when I boot up my phone that I transfered on my SD card. Please guys let me have some sleep. I've been staying all night long just to unbrick it. Dont mention any flashing rooting ****ing...I developed alergy to those words. I want it simple ..please...any help is appreciated. And sorry for my language.
Solution.
I Love The Register Video said:
First of all thanks for not caring. I spend days on Internet trying to find a solution. I have Blade which I bricked thanks to my noob skills with flashing and similiar ****. I just want my normal phone back. Couldn't give a **** bout roms anymore. Sorry for the lang but Im mad. When I boot it up it just sits there on green android logo not going past. I can enter download mode if it matters. As soon as I back it up Im getting rid of cwm mode and bull****. I use my sister phone to transfer files on my sd card. I cant enter my recovery mode since I installed that **** of cwm.When I try the key combo-android logo stuck with red light on. My phone has 90-100% battery Im sure. I need a solution where I can do something from pc with download mode or something that will automatecly start when I boot up my phone that I transfered on my SD card. Please guys let me have some sleep. I've been staying all night long just to unbrick it. Dont mention any flashing rooting ****ing...I developed alergy to those words. I want it simple ..please...any help is appreciated. And sorry for my language.
Click to expand...
Click to collapse
Calm down dude. If you can get in Download Mode , you are lucky. I even know people who had not get to Download Mode and had began to cry , cause the phones were only 3-4 Weeks old. Back to your problem.]First download here the stock rom.[/URL]
Then you need the Android SDK and the platform-tools from Google , so download it , cause you need ADB. Click here to get Android SDK.Then you need the ZTE drivers. Click here to get the drivers.Now get into download mode and connect the device via USB to your PC. Copy the boot.img (or recovery.img if it is in the ZIP package) and flash it via Fastboot (command: fastboot recovery.img) . Now you got the stock recovery. Now push the FULL update.zip at your sdcard , and now go to recovery , and update from sdcard , choose the update.zip ... Flashing takes a while. DO NOT WIPE ANYTHING BEFORE OR AFTER CHOOSING "UPDATE.ZIP" . Now your Phone should fully works normally
Hello, I have also bricked ZTE BLADE 3(I flashed a wrong kernel....). It only turns the red light on when i turn it on and blank screen, does not respond to vol + and vol - key, no android logo, but when I connect it to the computer via usb in Device Manager a COM port opens with the name ZTE DFU(Diagnostic interface). If anyone has experience of reviving this device from this mess? Thank you for your time
Zmaj5 said:
Hello, I have also bricked ZTE BLADE 3(I flashed a wrong kernel....). It only turns the red light on when i turn it on and blank screen, does not respond to vol + and vol - key, no android logo, but when I connect it to the computer via usb in Device Manager a COM port opens with the name ZTE DFU(Diagnostic interface). If anyone has experience of reviving this device from this mess? Thank you for your time
Click to expand...
Click to collapse
Your download screen is destroyed , but you are still able to get into it.
Try to get into it and flash the kernel with fastboot , the screen will bug during fastboot procedure.
My screen is completely blank and black, just the red light showing when i turn it on and it is always on. It does not respond on power button + vol. down, power button + vol. up, power button + vol. down + vol. up. When I connect it to the computer it does not show me a usb flash drive although I have the zte drivers installed and another sd card inside, but in Device Manager I can see it as a COM port(DFU) Diagnostic Interface. I tried accessing the bootloader via adb but it doesnt even list it with command "adb devices". I also tried flashing the recovery image via "fastboot recovery recovery.img" and "fastboot recovery.img" and still no luck, it just hangs at "waiting for device"...
Zmaj5 said:
My screen is completely blank and black, just the red light showing when i turn it on and it is always on. It does not respond on power button + vol. down, power button + vol. up, power button + vol. down + vol. up. When I connect it to the computer it does not show me a usb flash drive although I have the zte drivers installed and another sd card inside, but in Device Manager I can see it as a COM port(DFU) Diagnostic Interface. I tried accessing the bootloader via adb but it doesnt even list it with command "adb devices". I also tried flashing the recovery image via "fastboot recovery recovery.img" and "fastboot recovery.img" and still no luck, it just hangs at "waiting for device"...
Click to expand...
Click to collapse
When the red light still comes up , you still got chances to get it fixed...
I think so too.. but how? The only method left is JTAG... I saw a thread about using a TPT image to flash low level firmware using ZTEflash.exe but that thread was for ZTE Skate I think, I could not find the tpt.img file for zte blade 3.... Is there any other method via usb cable? Or send it to the shop?
Well, here is my situation:
Got a BLADE III Pro
Tried to root it and i played with few tools found on xda and other places (android forums). No luck at all. Tried to flash a CWM and NO LUCK neither. Tried to go back to flash stock CWM (as i was afraid of bricking it), searched for stock cwm and there is my BRICKED phone. When trying to hold volume down and power botton (both for over 20 seconds even) it will show a green android and its stuck there for hours. When trying to go to fast boot mode the same happens (with volume up and power botton).
While trying these two options the PC (Windows 7 64 bit) wont recognize the phone pluged in.
The only way the PC makes a sound is when i hold both volume up and down bottons and power it or plug it in the PC (without the battery even).
I need to know how can i fix it to boot only. PLEASE. Is this a "throw on can" phone now or it can be brought to life? PLEASE TELL ME PEOPLE.
pm me or any info as soon as you guys can.
I will respond to any question you might have.
Thank you in advance.
I have sent my phone to the shop and they said that they would need a jtag box specific for this model or a new motherboard for zte blade 3.... I think this the end for my zte blade 3

[Q] Help please!!! LG G2 F320L doesn't boot. Boot certification verify.

LG G2 F320L fails to boot after android update.
Device was not rooted.
Just from store.
-
After update of software, when device is started i get (picture in attachment):
Boot certification verify
Secure booting Error!
Cause: boot certification verify
-----
Tried to enter recovery mode (power + Volume down) - didn't
work.
Found out that pressing (power + Volume up and down) makes phone enter
some mode where everything is on korean (picture in attachment). After trying
pressing different buttons it didn't help also.
I tried "LG G2 Stock Firmware (Go Back to Stock)"
http://forum.xda-developers.com/showthread.php?t=2432476
but i couldn't enter download mode.
Then i tried "LG G2 F320K deep&hard brick! REPAIRED now."
http://forum.xda-developers.com/showthread.php?t=2476972
+
"[Guide]HOW TO get back to stock when your phone stuck in fastboot
mode" http://forum.xda-developers.com/showthread.php?t=2477595
but my phone doesn't enter fastboot mode!
I am out of ideas. Any help will be appreciated!!!
same issue here...and i can't get into download mode anymore...always boots in recovery and that's it. any idea what to do now????
PLEASE HELP..i go nuts!
btw....mine is rooted with customrom and twrp. so no warranty. ...so please !!!
as i have access to my twrp installation...is there a way to copy stuff to the internal storage of the g2 or can i connect a usb stick via dongle that i can mount in TWRP? ...so i can try to reinstall stuff?
upage said:
same issue here...and i can't get into download mode anymore...always boots in recovery and that's it. any idea what to do now????
PLEASE HELP..i go nuts!
btw....mine is rooted with customrom and twrp. so no warranty. ...so please !!!
as i have access to my twrp installation...is there a way to copy stuff to the internal storage of the g2 or can i connect a usb stick via dongle that i can mount in TWRP? ...so i can try to reinstall stuff?
Click to expand...
Click to collapse
Adb push
Sent from my ZTE Blade using XDA Premium 4 mobile app
Hey all! I've been fighting with similar errors for a couple days and I figured out what happened. I was stuck in fastboot mode the first time due to installing the d802 Cyanogen mod on my d800 AT&T phone on accident (wiki threw me off...) and the second time I attempted to flash a boot.img that was close but not quite right for my phone, causing the boot verify fail issue.
In the first case, my phone eventually went dead and I was able to enter download mode by holding volume up and plugging in the cable while it was still dead. In the second, I found that holding all buttons (volume up, down, and power) continuously eventually made it shut off completely. BUT you have to KEEP holding it, even after it reboots!! Once I got to that stage, the LG Flash software worked wonderfully. Once you get it reset, double and triple check you have the right rom file, then check a few more times just to make sure. Hope that helps!
sergeydavidoff said:
LG G2 F320L fails to boot after android update.
Device was not rooted.
Just from store.
-
After update of software, when device is started i get (picture in attachment):
Boot certification verify
Secure booting Error!
Cause: boot certification verify
-----
Tried to enter recovery mode (power + Volume down) - didn't
work.
Found out that pressing (power + Volume up and down) makes phone enter
some mode where everything is on korean (picture in attachment). After trying
pressing different buttons it didn't help also.
I tried "LG G2 Stock Firmware (Go Back to Stock)"
http://forum.xda-developers.com/showthread.php?t=2432476
but i couldn't enter download mode.
Then i tried "LG G2 F320K deep&hard brick! REPAIRED now."
http://forum.xda-developers.com/showthread.php?t=2476972
+
"[Guide]HOW TO get back to stock when your phone stuck in fastboot
mode" http://forum.xda-developers.com/showthread.php?t=2477595
but my phone doesn't enter fastboot mode!
I am out of ideas. Any help will be appreciated!!!
Click to expand...
Click to collapse
I had the same problem. here is theonly way to fix your problem http://forum.xda-developers.com/showthread.php?t=2582142
Partager.info said:
I had the same problem. here is theonly way to fix your problem http://forum.xda-developers.com/showthread.php?t=2582142
Click to expand...
Click to collapse
I probably souldn't have done that...
Code:
ERROR : BOOT certification verify
[830]-----------------------------------
[880]
[930]Secure booting Error!
[1030]
[1080]----------------------------------
That's the error message I get when I boot, this is after I hold the power down button for about 10sec. Then it goes back to black.
The solution seems to be here: http://forum.xda-developers.com/showthread.php?t=2582142 . Problem is that I used a kdz file to install my ROM and it doesn't have any img files.
When I connect my phone to my pc, a whole lot of local disks pop-up, of which I can acces only 1. This one has a lot of adsp.b00, adsp.b01, adsp.b02, etc files in it together with some other bXX (where XX is 01 to 26) files.
i haD usbhq_bulK and many drives all i had to do was flash tot.with flash tools if your doesnt go into download mode.. use srk toold to nuke download mode if it fails then open phone and short circuit the motherboard..
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404

[Q] LG G2 bootloop, No recovery mode, only download mode

Hi guys, (LG G2, Rooted, had twrp but now its vanished?!)
I managed to get my LG G2 into a bootloop. I was replacing bootanimations and rebooting and testing them out. I finally tried this 1080p boot animation that looked sweet. Once the device rebooted it would show half the boot animation and then reboot. I had twrp installed but now every time i try to access it it just ignores the hotkeys as if it doesn't exist anymore. I can only get into download mode if a usb is plugged in.
All i need to do is flash TWRP again so i can flash the stock bootanimation back. I do not want to do a fresh install as I have many important files (i know i should have backed them up). I have tried to access my phone via adb using windows commandline tool whilst in download mode. however, adb doesn't find my device (I was going to attempt to push the stock animation back).
Please help me guys i need my phone to be working by monday as i have work! thanks in advance
SPBoss said:
Hi guys, (LG G2, Rooted, had twrp but now its vanished?!)
I managed to get my LG G2 into a bootloop. I was replacing bootanimations and rebooting and testing them out. I finally tried this 1080p boot animation that looked sweet. Once the device rebooted it would show half the boot animation and then reboot. I had twrp installed but now every time i try to access it it just ignores the hotkeys as if it doesn't exist anymore. I can only get into download mode if a usb is plugged in.
All i need to do is flash TWRP again so i can flash the stock bootanimation back. I do not want to do a fresh install as I have many important files (i know i should have backed them up). I have tried to access my phone via adb using windows commandline tool whilst in download mode. however, adb doesn't find my device (I was going to attempt to push the stock animation back).
Please help me guys i need my phone to be working by monday as i have work! thanks in advance
Click to expand...
Click to collapse
1. If you connect your phone to PC, what happens?
2. I also had trouble accessing TWRP, so I did the "Factory reset" button combo (Don't remember what it was) and when I slided to confirm, twrp booted. From there I think you have adb and can fix everything.
To get to TWRP, hold the power button until the phone turns completely off, then turn on the phone while holding the power and volume down buttons, then when the LG logo pops up, let go and re-press those buttons. When prompted for a factory reset, press the power button. Works every time for me.
Alone i used lg flashtoolnow,its ok. I didnt click factory reset i assumed it would delete everything? With lgflash i have restored system and everything is how i left it.
Sent from my LG-D802 using Tapatalk
alone-together said:
To get to TWRP, hold the power button until the phone turns completely off, then turn on the phone while holding the power and volume down buttons, then when the LG logo pops up, let go and re-press those buttons. When prompted for a factory reset, press the power button. Works every time for me.
Click to expand...
Click to collapse
worked like a charm, many thanks!
alone-together said:
To get to TWRP, hold the power button until the phone turns completely off, then turn on the phone while holding the power and volume down buttons, then when the LG logo pops up, let go and re-press those buttons. When prompted for a factory reset, press the power button. Works every time for me.
Click to expand...
Click to collapse
i cannot enter the download mode and the recov mode. I pressed it as your instruction said, but nothing happened.. what should i do ?
All the application force close, so i cannot enter the OS either..
xzork said:
i cannot enter the download mode and the recov mode. I pressed it as your instruction said, but nothing happened.. what should i do ?
All the application force close, so i cannot enter the OS either..
Click to expand...
Click to collapse
First off, you'll need to make sure your phone isn't plugged in or it won't work - I'm afraid if you can't enter recovery you'll have to go back to stock. http://forum.xda-developers.com/showthread.php?t=2432476
Sucess
alone-together said:
To get to TWRP, hold the power button until the phone turns completely off, then turn on the phone while holding the power and volume down buttons, then when the LG logo pops up, let go and re-press those buttons. When prompted for a factory reset, press the power button. Works every time for me.
Click to expand...
Click to collapse
Thank you, saved me day.
dear sir good evening sir plz plz help me my LG G2 is not working. still only black screen and show lg logo sir plz help me:crying:
PUNNU NAGI said:
dear sir good evening sir plz plz help me my LG G2 is not working. still only black screen and show lg logo sir plz help me:crying:
Click to expand...
Click to collapse
Try to flash the Kitkat baseband or if you are fully stock then i suggest you to flash the KDZ to go back to full stock(http://forum.xda-developers.com/showthread.php?t=2432476)
If you still have important data like pictures or what then do normal flash. Use the Android version you also had as stock and use that as KDZ. If you are not stock then can you reach TWRP?
and what did you do before that causes the black screen?
Stuck with the LG logo. Nothing happens in download mode
Hi All, not sure if this has been answered prior. This is what happen, I wanted to flash SOKP so I backup my phone and saved to PC using Titanium. I have TWRP installed.
Boot Into Recovery Mode and Wipe Data,System,Cache,Dalvik
I restart so I can flash the SOKP Rom and all I see on my phone is the LG logo. I try to restart using the Power and Up button, but it just sits in the download mode saying "Firmware Update" with no movement or action.
The phone is unable to turn off now. This is my first go at Flashing a Rom. Any help or suggestion would be greatly appreciated. Thanks in advance
my lg g2 is stuck on lg logo, and when i can enter download mode, and flash kdz my computer just dont detect my phone.
please help me :crying:
jungsora said:
my lg g2 is stuck on lg logo, and when i can enter download mode, and flash kdz my computer just dont detect my phone.
please help me :crying:
Click to expand...
Click to collapse
same here .... plz any solution?
justme!! said:
same here .... plz any solution?
Click to expand...
Click to collapse
Someone help, same issue.
sam_p15 said:
Someone help, same issue.
Click to expand...
Click to collapse
Someone help
Hey, I have the nearly same problem with my G2 running CM12 also installed recovery
But I can't reboot in recovery neither with the factory reset buttons, nor manually with SDK Manager, because the device is not found.
So I can just reboot and it shows the CM boot image, or get in the download mode.:crying:
Any suggestions?:fingers-crossed:
sam_p15 said:
Someone help, same issue.
Click to expand...
Click to collapse
I was in same stuation before 2 months send to warranty.
If rooted you can use adb shell with su and push partitions with "dd" while staring (stuck in lg logo)
Help!!
I have boot loop, only download mode accessible, device not found on adb. When I try LG FlashTool, instead of using the KDZ file I provide, it starts downloading some other firmware at times, and at times it says your software is up to date. What do I do? :|
How do i fix TWRP Bootloop on my HTC explorer a310e... ?
Dear,
How do i fix TWRP Bootloop on my HTC explorer a310e... ?
I hav custom cm11 Kitkat ROM installed on it...
but after I installed the rom, and again tried to reboot
into TWRP recovery, it is just stuck on the blue color
TEAMWIN screen... Please help how to fix it...!
USE method with .tot is working for me

[Q] LG G2 stuck for no apparent reason

Ok, so I installed the LG G Pro 2 ROM, had it rooted and ofc had stock recovery ... My Wi-Fi (for some odd reason) didn't want to turn itself on, so i tried to restart the phone .... It got stuck in a bootloop, so I'm having following problems ... I entered stock recovery and tried to wipe the rom, no help, still stuck in recovery .... Can't access download mode to flash a KDZ file, since I cant really "shut" the phone down, rather just "restart" it by long pressing the power key, and if i try to hold the vol up button while connecting it to the computer to enter download mode, it fails every time and it just goes to the LG logo and get's stuck there .... Can I somehow shut the phone down completly or flash a kdz file from stock recovery ?
Edit: OK, I somehow did shut it down completly ... I think i held all 3 buttons at the same time for like, 10 - 15 secs and it did shut down completly ...
So - sorry for the thread, mods can lock it!
Doomhamma said:
Ok, so I installed the LG G Pro 2 ROM, had it rooted and ofc had stock recovery ... My Wi-Fi (for some odd reason) didn't want to turn itself on, so i tried to restart the phone .... It got stuck in a bootloop, so I'm having following problems ... I entered stock recovery and tried to wipe the rom, no help, still stuck in recovery .... Can't access download mode to flash a KDZ file, since I cant really "shut" the phone down, rather just "restart" it by long pressing the power key, and if i try to hold the vol up button while connecting it to the computer to enter download mode, it fails every time and it just goes to the LG logo and get's stuck there .... Can I somehow shut the phone down completly or flash a kdz file from stock recovery ?
Edit: OK, I somehow did shut it down completly ... I think i held all 3 buttons at the same time for like, 10 - 15 secs and it did shut down completly ...
So - sorry for the thread, mods can lock it!
Click to expand...
Click to collapse
download mode. try holding power button down for 20+ seconds. now hold volume up button while plugging in usb cable.

[Q] LG G2 stuck in fastboot mode started!

Hello all! So recently i decided to try and install a custom recovery, autodec or something and when i boot into recovery all it says is:
[860]fastboot mode started
[910]udc_start()
(if i plug it into my PC it adds)
[1070]-reset-
[1080]-portchange-
[1150] fastbootrocessing commands
Note:numbers change at times
i have tried A LOT of methods but it never works, so its either me that did the method wrong or that it doesn't work at all.
I CANNOT get into recovery mode at ALL
I CANNOT go into download mode, it just switches back into the fast boot mode started...
i cant factory hard reset, all it does is take me back into the fast boot thingy.
so basically everything takes me back to the fast boot thing.
PLZ HALP XD <3
EDIT: Also when i try cmd it says device is not ready?
LGG2 XD HALP said:
Hello all! So recently i decided to try and install a custom recovery, autodec or something and when i boot into recovery all it says is:
[860]fastboot mode started
[910]udc_start()
(if i plug it into my PC it adds)
[1070]-reset-
[1080]-portchange-
[1150] fastbootrocessing commands
Note:numbers change at times
i have tried A LOT of methods but it never works, so its either me that did the method wrong or that it doesn't work at all.
I CANNOT get into recovery mode at ALL
I CANNOT go into download mode, it just switches back into the fast boot mode started...
i cant factory hard reset, all it does is take me back into the fast boot thingy.
so basically everything takes me back to the fast boot thing.
PLZ HALP XD <3
EDIT: Also when i try cmd it says device is not ready?
Click to expand...
Click to collapse
same problem here..stucked..i find this http://forum.xda-developers.com/showthread.php?t=2477595 ..now i'm trying to do something
That tutorial doesnt worked for me because my pc didnt recognize my phone...but i was able to enter in download mode.. plug in your usb, press the power button to turn off your phone, and hold the volume up button and it will need to enter in download mode..this worked for me
raulx222 said:
same problem here..stucked..i find this http://forum.xda-developers.com/showthread.php?t=2477595 ..now i'm trying to do something
That tutorial doesnt worked for me because my pc didnt recognize my phone...but i was able to enter in download mode.. plug in your usb, press the power button to turn off your phone, and hold the volume up button and it will need to enter in download mode..this worked for me
Click to expand...
Click to collapse
ty m8 but i fixed my phone XD

Categories

Resources